kernel-ark/arch/sparc/kernel/etrap_64.S

285 lines
7.1 KiB
ArmAsm
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* etrap.S: Preparing for entry into the kernel on Sparc V9.
*
* Copyright (C) 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1997, 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz)
*/
#include <asm/asi.h>
#include <asm/pstate.h>
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/spitfire.h>
#include <asm/head.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#define TASK_REGOFF (THREAD_SIZE-TRACEREG_SZ-STACKFRAME_SZ)
#define ETRAP_PSTATE1 (PSTATE_TSO | PSTATE_PRIV)
#define ETRAP_PSTATE2 \
(PSTATE_TSO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE)
/*
* On entry, %g7 is return address - 0x4.
* %g4 and %g5 will be preserved %l4 and %l5 respectively.
*/
.text
.align 64
sparc: Fix debugger syscall restart interactions. So, forever, we've had this ptrace_signal_deliver implementation which tries to handle all of the nasties that can occur when the debugger looks at a process about to take a signal. It's meant to address all of these issues inside of the kernel so that the debugger need not be mindful of such things. Problem is, this doesn't work. The idea was that we should do the syscall restart business first, so that the debugger captures that state. Otherwise, if the debugger for example saves the child's state, makes the child execute something else, then restores the saved state, we won't handle the syscall restart properly because we lose the "we're in a syscall" state. The code here worked for most cases, but if the debugger actually passes the signal through to the child unaltered, it's possible that we would do a syscall restart when we shouldn't have. In particular this breaks the case of debugging a process under a gdb which is being debugged by yet another gdb. gdb uses sigsuspend to wait for SIGCHLD of the inferior, but if gdb itself is being debugged by a top-level gdb we get a ptrace_stop(). The top-level gdb does a PTRACE_CONT with SIGCHLD to let the inferior gdb see the signal. But ptrace_signal_deliver() assumed the debugger would cancel out the signal and therefore did a syscall restart, because the return error was ERESTARTNOHAND. Fix this by simply making ptrace_signal_deliver() a nop, and providing a way for the debugger to control system call restarting properly: 1) Report a "in syscall" software bit in regs->{tstate,psr}. It is set early on in trap entry to a system call and is fully visible to the debugger via ptrace() and regsets. 2) Test this bit right before doing a syscall restart. We have to do a final recheck right after get_signal_to_deliver() in case the debugger cleared the bit during ptrace_stop(). 3) Clear the bit in trap return so we don't accidently try to set that bit in the real register. As a result we also get a ptrace_{is,clear}_syscall() for sparc32 just like sparc64 has. M68K has this same exact bug, and is now the only other user of the ptrace_signal_deliver hook. It needs to be fixed in the same exact way as sparc. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-11 09:07:19 +00:00
.globl etrap_syscall, etrap, etrap_irq, etraptl1
etrap: rdpr %pil, %g2
sparc: Fix debugger syscall restart interactions. So, forever, we've had this ptrace_signal_deliver implementation which tries to handle all of the nasties that can occur when the debugger looks at a process about to take a signal. It's meant to address all of these issues inside of the kernel so that the debugger need not be mindful of such things. Problem is, this doesn't work. The idea was that we should do the syscall restart business first, so that the debugger captures that state. Otherwise, if the debugger for example saves the child's state, makes the child execute something else, then restores the saved state, we won't handle the syscall restart properly because we lose the "we're in a syscall" state. The code here worked for most cases, but if the debugger actually passes the signal through to the child unaltered, it's possible that we would do a syscall restart when we shouldn't have. In particular this breaks the case of debugging a process under a gdb which is being debugged by yet another gdb. gdb uses sigsuspend to wait for SIGCHLD of the inferior, but if gdb itself is being debugged by a top-level gdb we get a ptrace_stop(). The top-level gdb does a PTRACE_CONT with SIGCHLD to let the inferior gdb see the signal. But ptrace_signal_deliver() assumed the debugger would cancel out the signal and therefore did a syscall restart, because the return error was ERESTARTNOHAND. Fix this by simply making ptrace_signal_deliver() a nop, and providing a way for the debugger to control system call restarting properly: 1) Report a "in syscall" software bit in regs->{tstate,psr}. It is set early on in trap entry to a system call and is fully visible to the debugger via ptrace() and regsets. 2) Test this bit right before doing a syscall restart. We have to do a final recheck right after get_signal_to_deliver() in case the debugger cleared the bit during ptrace_stop(). 3) Clear the bit in trap return so we don't accidently try to set that bit in the real register. As a result we also get a ptrace_{is,clear}_syscall() for sparc32 just like sparc64 has. M68K has this same exact bug, and is now the only other user of the ptrace_signal_deliver hook. It needs to be fixed in the same exact way as sparc. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-11 09:07:19 +00:00
etrap_irq: clr %g3
etrap_syscall: TRAP_LOAD_THREAD_REG(%g6, %g1)
rdpr %tstate, %g1
sparc: Fix debugger syscall restart interactions. So, forever, we've had this ptrace_signal_deliver implementation which tries to handle all of the nasties that can occur when the debugger looks at a process about to take a signal. It's meant to address all of these issues inside of the kernel so that the debugger need not be mindful of such things. Problem is, this doesn't work. The idea was that we should do the syscall restart business first, so that the debugger captures that state. Otherwise, if the debugger for example saves the child's state, makes the child execute something else, then restores the saved state, we won't handle the syscall restart properly because we lose the "we're in a syscall" state. The code here worked for most cases, but if the debugger actually passes the signal through to the child unaltered, it's possible that we would do a syscall restart when we shouldn't have. In particular this breaks the case of debugging a process under a gdb which is being debugged by yet another gdb. gdb uses sigsuspend to wait for SIGCHLD of the inferior, but if gdb itself is being debugged by a top-level gdb we get a ptrace_stop(). The top-level gdb does a PTRACE_CONT with SIGCHLD to let the inferior gdb see the signal. But ptrace_signal_deliver() assumed the debugger would cancel out the signal and therefore did a syscall restart, because the return error was ERESTARTNOHAND. Fix this by simply making ptrace_signal_deliver() a nop, and providing a way for the debugger to control system call restarting properly: 1) Report a "in syscall" software bit in regs->{tstate,psr}. It is set early on in trap entry to a system call and is fully visible to the debugger via ptrace() and regsets. 2) Test this bit right before doing a syscall restart. We have to do a final recheck right after get_signal_to_deliver() in case the debugger cleared the bit during ptrace_stop(). 3) Clear the bit in trap return so we don't accidently try to set that bit in the real register. As a result we also get a ptrace_{is,clear}_syscall() for sparc32 just like sparc64 has. M68K has this same exact bug, and is now the only other user of the ptrace_signal_deliver hook. It needs to be fixed in the same exact way as sparc. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-11 09:07:19 +00:00
or %g1, %g3, %g1
sllx %g2, 20, %g3
andcc %g1, TSTATE_PRIV, %g0
or %g1, %g3, %g1
bne,pn %xcc, 1f
sub %sp, STACKFRAME_SZ+TRACEREG_SZ-STACK_BIAS, %g2
661: wrpr %g0, 7, %cleanwin
.section .fast_win_ctrl_1insn_patch, "ax"
.word 661b
.word 0x85880000 ! allclean
.previous
sethi %hi(TASK_REGOFF), %g2
sethi %hi(TSTATE_PEF), %g3
or %g2, %lo(TASK_REGOFF), %g2
and %g1, %g3, %g3
brnz,pn %g3, 1f
add %g6, %g2, %g2
wr %g0, 0, %fprs
1: rdpr %tpc, %g3
stx %g1, [%g2 + STACKFRAME_SZ + PT_V9_TSTATE]
rdpr %tnpc, %g1
stx %g3, [%g2 + STACKFRAME_SZ + PT_V9_TPC]
rd %y, %g3
stx %g1, [%g2 + STACKFRAME_SZ + PT_V9_TNPC]
rdpr %tt, %g1
st %g3, [%g2 + STACKFRAME_SZ + PT_V9_Y]
sethi %hi(PT_REGS_MAGIC), %g3
or %g3, %g1, %g1
st %g1, [%g2 + STACKFRAME_SZ + PT_V9_MAGIC]
rdpr %cansave, %g1
brnz,pt %g1, etrap_save
nop
rdpr %cwp, %g1
add %g1, 2, %g1
wrpr %g1, %cwp
be,pt %xcc, etrap_user_spill
mov ASI_AIUP, %g3
rdpr %otherwin, %g3
brz %g3, etrap_kernel_spill
mov ASI_AIUS, %g3
etrap_user_spill:
wr %g3, 0x0, %asi
ldx [%g6 + TI_FLAGS], %g3
and %g3, _TIF_32BIT, %g3
brnz,pt %g3, etrap_user_spill_32bit
nop
ba,a,pt %xcc, etrap_user_spill_64bit
etrap_save: save %g2, -STACK_BIAS, %sp
mov %g6, %l6
bne,pn %xcc, 3f
mov PRIMARY_CONTEXT, %l4
661: rdpr %canrestore, %g3
.section .fast_win_ctrl_1insn_patch, "ax"
.word 661b
nop
.previous
rdpr %wstate, %g2
661: wrpr %g0, 0, %canrestore
.section .fast_win_ctrl_1insn_patch, "ax"
.word 661b
nop
.previous
sll %g2, 3, %g2
/* Set TI_SYS_FPDEPTH to 1 and clear TI_SYS_NOERROR. */
mov 1, %l5
sth %l5, [%l6 + TI_SYS_NOERROR]
661: wrpr %g3, 0, %otherwin
.section .fast_win_ctrl_1insn_patch, "ax"
.word 661b
.word 0x87880000 ! otherw
.previous
wrpr %g2, 0, %wstate
sethi %hi(sparc64_kern_pri_context), %g2
ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3
661: stxa %g3, [%l4] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %g3, [%l4] ASI_MMU
.previous
sethi %hi(KERNBASE), %l4
flush %l4
mov ASI_AIUS, %l7
2: mov %g4, %l4
mov %g5, %l5
add %g7, 4, %l2
/* Go to trap time globals so we can save them. */
661: wrpr %g0, ETRAP_PSTATE1, %pstate
.section .sun4v_1insn_patch, "ax"
.word 661b
SET_GL(0)
.previous
stx %g1, [%sp + PTREGS_OFF + PT_V9_G1]
stx %g2, [%sp + PTREGS_OFF + PT_V9_G2]
sllx %l7, 24, %l7
stx %g3, [%sp + PTREGS_OFF + PT_V9_G3]
rdpr %cwp, %l0
stx %g4, [%sp + PTREGS_OFF + PT_V9_G4]
stx %g5, [%sp + PTREGS_OFF + PT_V9_G5]
stx %g6, [%sp + PTREGS_OFF + PT_V9_G6]
stx %g7, [%sp + PTREGS_OFF + PT_V9_G7]
or %l7, %l0, %l7
661: sethi %hi(TSTATE_TSO | TSTATE_PEF), %l0
/* If userspace is using ADI, it could potentially pass
* a pointer with version tag embedded in it. To maintain
* the ADI security, we must enable PSTATE.mcde. Userspace
* would have already set TTE.mcd in an earlier call to
* kernel and set the version tag for the address being
* dereferenced. Setting PSTATE.mcde would ensure any
* access to userspace data through a system call honors
* ADI and does not allow a rogue app to bypass ADI by
* using system calls. Setting PSTATE.mcde only affects
* accesses to virtual addresses that have TTE.mcd set.
* Set PMCDPER to ensure any exceptions caused by ADI
* version tag mismatch are exposed before system call
* returns to userspace. Setting PMCDPER affects only
* writes to virtual addresses that have TTE.mcd set and
* have a version tag set as well.
*/
.section .sun_m7_1insn_patch, "ax"
.word 661b
sethi %hi(TSTATE_TSO | TSTATE_PEF | TSTATE_MCDE), %l0
.previous
661: nop
.section .sun_m7_1insn_patch, "ax"
.word 661b
.word 0xaf902001 /* wrpr %g0, 1, %pmcdper */
.previous
or %l7, %l0, %l7
wrpr %l2, %tnpc
wrpr %l7, (TSTATE_PRIV | TSTATE_IE), %tstate
stx %i0, [%sp + PTREGS_OFF + PT_V9_I0]
stx %i1, [%sp + PTREGS_OFF + PT_V9_I1]
stx %i2, [%sp + PTREGS_OFF + PT_V9_I2]
stx %i3, [%sp + PTREGS_OFF + PT_V9_I3]
stx %i4, [%sp + PTREGS_OFF + PT_V9_I4]
stx %i5, [%sp + PTREGS_OFF + PT_V9_I5]
stx %i6, [%sp + PTREGS_OFF + PT_V9_I6]
mov %l6, %g6
stx %i7, [%sp + PTREGS_OFF + PT_V9_I7]
LOAD_PER_CPU_BASE(%g5, %g6, %g4, %g3, %l1)
ldx [%g6 + TI_TASK], %g4
done
3: mov ASI_P, %l7
ldub [%l6 + TI_FPDEPTH], %l5
add %l6, TI_FPSAVED + 1, %l4
srl %l5, 1, %l3
add %l5, 2, %l5
/* Set TI_SYS_FPDEPTH to %l5 and clear TI_SYS_NOERROR. */
sth %l5, [%l6 + TI_SYS_NOERROR]
ba,pt %xcc, 2b
stb %g0, [%l4 + %l3]
nop
etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself.
* We place this right after pt_regs on the trap stack.
* The layout is:
* 0x00 TL1's TSTATE
* 0x08 TL1's TPC
* 0x10 TL1's TNPC
* 0x18 TL1's TT
* ...
* 0x58 TL4's TT
* 0x60 TL
*/
TRAP_LOAD_THREAD_REG(%g6, %g1)
sub %sp, ((4 * 8) * 4) + 8, %g2
rdpr %tl, %g1
wrpr %g0, 1, %tl
rdpr %tstate, %g3
stx %g3, [%g2 + STACK_BIAS + 0x00]
rdpr %tpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x08]
rdpr %tnpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x10]
rdpr %tt, %g3
stx %g3, [%g2 + STACK_BIAS + 0x18]
wrpr %g0, 2, %tl
rdpr %tstate, %g3
stx %g3, [%g2 + STACK_BIAS + 0x20]
rdpr %tpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x28]
rdpr %tnpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x30]
rdpr %tt, %g3
stx %g3, [%g2 + STACK_BIAS + 0x38]
sethi %hi(is_sun4v), %g3
lduw [%g3 + %lo(is_sun4v)], %g3
brnz,pn %g3, finish_tl1_capture
nop
wrpr %g0, 3, %tl
rdpr %tstate, %g3
stx %g3, [%g2 + STACK_BIAS + 0x40]
rdpr %tpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x48]
rdpr %tnpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x50]
rdpr %tt, %g3
stx %g3, [%g2 + STACK_BIAS + 0x58]
wrpr %g0, 4, %tl
rdpr %tstate, %g3
stx %g3, [%g2 + STACK_BIAS + 0x60]
rdpr %tpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x68]
rdpr %tnpc, %g3
stx %g3, [%g2 + STACK_BIAS + 0x70]
rdpr %tt, %g3
stx %g3, [%g2 + STACK_BIAS + 0x78]
stx %g1, [%g2 + STACK_BIAS + 0x80]
finish_tl1_capture:
wrpr %g0, 1, %tl
661: nop
.section .sun4v_1insn_patch, "ax"
.word 661b
SET_GL(1)
.previous
rdpr %tstate, %g1
sub %g2, STACKFRAME_SZ + TRACEREG_SZ - STACK_BIAS, %g2
ba,pt %xcc, 1b
andcc %g1, TSTATE_PRIV, %g0
#undef TASK_REGOFF
#undef ETRAP_PSTATE1