kernel-ark/drivers/infiniband/ulp/ipoib/ipoib_verbs.c

293 lines
8.1 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "ipoib.h"
int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid, int set_qkey)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ib_qp_attr *qp_attr = NULL;
int ret;
u16 pkey_index;
if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index)) {
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
ret = -ENXIO;
goto out;
}
set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
if (set_qkey) {
ret = -ENOMEM;
qp_attr = kmalloc(sizeof *qp_attr, GFP_KERNEL);
if (!qp_attr)
goto out;
/* set correct QKey for QP */
qp_attr->qkey = priv->qkey;
ret = ib_modify_qp(priv->qp, qp_attr, IB_QP_QKEY);
if (ret) {
ipoib_warn(priv, "failed to modify QP, ret = %d\n", ret);
goto out;
}
}
/* attach QP to multicast group */
ret = ib_attach_mcast(priv->qp, mgid, mlid);
if (ret)
ipoib_warn(priv, "failed to attach to multicast group, ret = %d\n", ret);
out:
kfree(qp_attr);
return ret;
}
int ipoib_init_qp(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
int ret;
struct ib_qp_attr qp_attr;
int attr_mask;
if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags))
return -1;
qp_attr.qp_state = IB_QPS_INIT;
qp_attr.qkey = 0;
qp_attr.port_num = priv->port;
qp_attr.pkey_index = priv->pkey_index;
attr_mask =
IB_QP_QKEY |
IB_QP_PORT |
IB_QP_PKEY_INDEX |
IB_QP_STATE;
ret = ib_modify_qp(priv->qp, &qp_attr, attr_mask);
if (ret) {
ipoib_warn(priv, "failed to modify QP to init, ret = %d\n", ret);
goto out_fail;
}
qp_attr.qp_state = IB_QPS_RTR;
/* Can't set this in a INIT->RTR transition */
attr_mask &= ~IB_QP_PORT;
ret = ib_modify_qp(priv->qp, &qp_attr, attr_mask);
if (ret) {
ipoib_warn(priv, "failed to modify QP to RTR, ret = %d\n", ret);
goto out_fail;
}
qp_attr.qp_state = IB_QPS_RTS;
qp_attr.sq_psn = 0;
attr_mask |= IB_QP_SQ_PSN;
attr_mask &= ~IB_QP_PKEY_INDEX;
ret = ib_modify_qp(priv->qp, &qp_attr, attr_mask);
if (ret) {
ipoib_warn(priv, "failed to modify QP to RTS, ret = %d\n", ret);
goto out_fail;
}
return 0;
out_fail:
qp_attr.qp_state = IB_QPS_RESET;
if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE))
ipoib_warn(priv, "Failed to modify QP to RESET state\n");
return ret;
}
int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ib_qp_init_attr init_attr = {
.cap = {
.max_send_wr = ipoib_sendq_size,
.max_recv_wr = ipoib_recvq_size,
.max_send_sge = 1,
.max_recv_sge = IPOIB_UD_RX_SG
},
.sq_sig_type = IB_SIGNAL_ALL_WR,
.qp_type = IB_QPT_UD
};
int ret, size;
int i;
priv->pd = ib_alloc_pd(priv->ca);
if (IS_ERR(priv->pd)) {
printk(KERN_WARNING "%s: failed to allocate PD\n", ca->name);
return -ENODEV;
}
priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE);
if (IS_ERR(priv->mr)) {
printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name);
goto out_free_pd;
}
size = ipoib_recvq_size + 1;
ret = ipoib_cm_dev_init(dev);
IPoIB/cm: Add connected mode support for devices without SRQs Some IB adapters (notably IBM's eHCA) do not implement SRQs (shared receive queues). The current IPoIB connected mode support only works on devices that support SRQs. Fix this by adding support for using the receive queue of each connected mode receive QP. The disadvantage of this compared to using an SRQ is that it means a full queue of receives must be posted for each remote connected mode peer, which means that total memory usage is potentially much higher than when using SRQs. To manage this, add a new module parameter "max_nonsrq_conn_qp" that limits the number of connections allowed per interface. The rest of the changes are fairly straightforward: we use a table of struct ipoib_cm_rx to hold all the active connections, and put the table index of the connection in the high bits of receive WR IDs. This is needed because we cannot rely on the struct ib_wc.qp field for non-SRQ receive completions. Most of the rest of the changes just test whether or not an SRQ is available, and post receives or find received packets in the right place depending on the answer. Cleaning up dead connections actually becomes simpler, because we do not have to do the "last WQE reached" dance that is required to destroy QPs attached to an SRQ. We just move the QP to the error state and wait for all pending receives to be flushed. Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> [ Completely rewritten and split up, based on Pradeep's work. Several bugs fixed and no doubt several bugs introduced. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 22:15:24 +00:00
if (!ret) {
size += ipoib_sendq_size;
IPoIB/cm: Add connected mode support for devices without SRQs Some IB adapters (notably IBM's eHCA) do not implement SRQs (shared receive queues). The current IPoIB connected mode support only works on devices that support SRQs. Fix this by adding support for using the receive queue of each connected mode receive QP. The disadvantage of this compared to using an SRQ is that it means a full queue of receives must be posted for each remote connected mode peer, which means that total memory usage is potentially much higher than when using SRQs. To manage this, add a new module parameter "max_nonsrq_conn_qp" that limits the number of connections allowed per interface. The rest of the changes are fairly straightforward: we use a table of struct ipoib_cm_rx to hold all the active connections, and put the table index of the connection in the high bits of receive WR IDs. This is needed because we cannot rely on the struct ib_wc.qp field for non-SRQ receive completions. Most of the rest of the changes just test whether or not an SRQ is available, and post receives or find received packets in the right place depending on the answer. Cleaning up dead connections actually becomes simpler, because we do not have to do the "last WQE reached" dance that is required to destroy QPs attached to an SRQ. We just move the QP to the error state and wait for all pending receives to be flushed. Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> [ Completely rewritten and split up, based on Pradeep's work. Several bugs fixed and no doubt several bugs introduced. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 22:15:24 +00:00
if (ipoib_cm_has_srq(dev))
size += ipoib_recvq_size + 1; /* 1 extra for rx_drain_qp */
else
size += ipoib_recvq_size * ipoib_max_conn_qp;
}
priv->recv_cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, size, 0);
if (IS_ERR(priv->recv_cq)) {
printk(KERN_WARNING "%s: failed to create receive CQ\n", ca->name);
goto out_free_mr;
}
priv->send_cq = ib_create_cq(priv->ca, ipoib_send_comp_handler, NULL,
dev, ipoib_sendq_size, 0);
if (IS_ERR(priv->send_cq)) {
printk(KERN_WARNING "%s: failed to create send CQ\n", ca->name);
goto out_free_recv_cq;
}
if (ib_req_notify_cq(priv->recv_cq, IB_CQ_NEXT_COMP))
goto out_free_send_cq;
init_attr.send_cq = priv->send_cq;
init_attr.recv_cq = priv->recv_cq;
if (priv->hca_caps & IB_DEVICE_UD_TSO)
init_attr.create_flags |= IB_QP_CREATE_IPOIB_UD_LSO;
if (priv->hca_caps & IB_DEVICE_BLOCK_MULTICAST_LOOPBACK)
init_attr.create_flags |= IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK;
if (dev->features & NETIF_F_SG)
init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
priv->qp = ib_create_qp(priv->pd, &init_attr);
if (IS_ERR(priv->qp)) {
printk(KERN_WARNING "%s: failed to create QP\n", ca->name);
goto out_free_send_cq;
}
priv->dev->dev_addr[1] = (priv->qp->qp_num >> 16) & 0xff;
priv->dev->dev_addr[2] = (priv->qp->qp_num >> 8) & 0xff;
priv->dev->dev_addr[3] = (priv->qp->qp_num ) & 0xff;
for (i = 0; i < MAX_SKB_FRAGS + 1; ++i)
priv->tx_sge[i].lkey = priv->mr->lkey;
priv->tx_wr.opcode = IB_WR_SEND;
priv->tx_wr.sg_list = priv->tx_sge;
priv->tx_wr.send_flags = IB_SEND_SIGNALED;
priv->rx_sge[0].lkey = priv->mr->lkey;
if (ipoib_ud_need_sg(priv->max_ib_mtu)) {
priv->rx_sge[0].length = IPOIB_UD_HEAD_SIZE;
priv->rx_sge[1].length = PAGE_SIZE;
priv->rx_sge[1].lkey = priv->mr->lkey;
priv->rx_wr.num_sge = IPOIB_UD_RX_SG;
} else {
priv->rx_sge[0].length = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
priv->rx_wr.num_sge = 1;
}
priv->rx_wr.next = NULL;
priv->rx_wr.sg_list = priv->rx_sge;
return 0;
out_free_send_cq:
ib_destroy_cq(priv->send_cq);
out_free_recv_cq:
ib_destroy_cq(priv->recv_cq);
out_free_mr:
ib_dereg_mr(priv->mr);
ipoib_cm_dev_cleanup(dev);
out_free_pd:
ib_dealloc_pd(priv->pd);
return -ENODEV;
}
void ipoib_transport_dev_cleanup(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
if (priv->qp) {
if (ib_destroy_qp(priv->qp))
ipoib_warn(priv, "ib_qp_destroy failed\n");
priv->qp = NULL;
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
}
if (ib_destroy_cq(priv->send_cq))
ipoib_warn(priv, "ib_cq_destroy (send) failed\n");
if (ib_destroy_cq(priv->recv_cq))
ipoib_warn(priv, "ib_cq_destroy (recv) failed\n");
ipoib_cm_dev_cleanup(dev);
if (ib_dereg_mr(priv->mr))
ipoib_warn(priv, "ib_dereg_mr failed\n");
if (ib_dealloc_pd(priv->pd))
ipoib_warn(priv, "ib_dealloc_pd failed\n");
}
void ipoib_event(struct ib_event_handler *handler,
struct ib_event *record)
{
struct ipoib_dev_priv *priv =
container_of(handler, struct ipoib_dev_priv, event_handler);
if (record->element.port_num != priv->port)
return;
ipoib_dbg(priv, "Event %d on device %s port %d\n", record->event,
record->device->name, record->element.port_num);
if (record->event == IB_EVENT_SM_CHANGE ||
record->event == IB_EVENT_CLIENT_REREGISTER) {
queue_work(ipoib_workqueue, &priv->flush_light);
} else if (record->event == IB_EVENT_PORT_ERR ||
record->event == IB_EVENT_PORT_ACTIVE ||
record->event == IB_EVENT_LID_CHANGE) {
queue_work(ipoib_workqueue, &priv->flush_normal);
} else if (record->event == IB_EVENT_PKEY_CHANGE) {
queue_work(ipoib_workqueue, &priv->flush_heavy);
}
}