kernel-ark/include/linux/sc26198.h

534 lines
13 KiB
C
Raw Normal View History

/*****************************************************************************/
/*
* sc26198.h -- SC26198 UART hardware info.
*
* Copyright (C) 1995-1998 Stallion Technologies
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*****************************************************************************/
#ifndef _SC26198_H
#define _SC26198_H
/*****************************************************************************/
/*
* Define the number of async ports per sc26198 uart device.
*/
#define SC26198_PORTS 8
/*
* Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
*/
#define SC26198_MASTERCLOCK 14745600L
#define SC26198_DCLK (SC26198_MASTERCLOCK)
#define SC26198_CCLK (SC26198_MASTERCLOCK / 2)
#define SC26198_BCLK (SC26198_MASTERCLOCK / 4)
/*
* Define internal FIFO sizes for the 26198 ports.
*/
#define SC26198_TXFIFOSIZE 16
#define SC26198_RXFIFOSIZE 16
/*****************************************************************************/
/*
* Global register definitions. These registers are global to each 26198
* device, not specific ports on it.
*/
#define TSTR 0x0d
#define GCCR 0x0f
#define ICR 0x1b
#define WDTRCR 0x1d
#define IVR 0x1f
#define BRGTRUA 0x84
#define GPOSR 0x87
#define GPOC 0x8b
#define UCIR 0x8c
#define CIR 0x8c
#define BRGTRUB 0x8d
#define GRXFIFO 0x8e
#define GTXFIFO 0x8e
#define GCCR2 0x8f
#define BRGTRLA 0x94
#define GPOR 0x97
#define GPOD 0x9b
#define BRGTCR 0x9c
#define GICR 0x9c
#define BRGTRLB 0x9d
#define GIBCR 0x9d
#define GITR 0x9f
/*
* Per port channel registers. These are the register offsets within
* the port address space, so need to have the port address (0 to 7)
* inserted in bit positions 4:6.
*/
#define MR0 0x00
#define MR1 0x01
#define IOPCR 0x02
#define BCRBRK 0x03
#define BCRCOS 0x04
#define BCRX 0x06
#define BCRA 0x07
#define XONCR 0x08
#define XOFFCR 0x09
#define ARCR 0x0a
#define RXCSR 0x0c
#define TXCSR 0x0e
#define MR2 0x80
#define SR 0x81
#define SCCR 0x81
#define ISR 0x82
#define IMR 0x82
#define TXFIFO 0x83
#define RXFIFO 0x83
#define IPR 0x84
#define IOPIOR 0x85
#define XISR 0x86
/*
* For any given port calculate the address to use to access a specified
* register. This is only used for unusual access, mostly this is done
* through the assembler access routines.
*/
#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg))
/*****************************************************************************/
/*
* Global configuration control register bit definitions.
*/
#define GCCR_NOACK 0x00
#define GCCR_IVRACK 0x02
#define GCCR_IVRCHANACK 0x04
#define GCCR_IVRTYPCHANACK 0x06
#define GCCR_ASYNCCYCLE 0x00
#define GCCR_SYNCCYCLE 0x40
/*****************************************************************************/
/*
* Mode register 0 bit definitions.
*/
#define MR0_ADDRNONE 0x00
#define MR0_AUTOWAKE 0x01
#define MR0_AUTODOZE 0x02
#define MR0_AUTOWAKEDOZE 0x03
#define MR0_SWFNONE 0x00
#define MR0_SWFTX 0x04
#define MR0_SWFRX 0x08
#define MR0_SWFRXTX 0x0c
#define MR0_TXMASK 0x30
#define MR0_TXEMPTY 0x00
#define MR0_TXHIGH 0x10
#define MR0_TXHALF 0x20
#define MR0_TXRDY 0x00
#define MR0_ADDRNT 0x00
#define MR0_ADDRT 0x40
#define MR0_SWFNT 0x00
#define MR0_SWFT 0x80
/*
* Mode register 1 bit definitions.
*/
#define MR1_CS5 0x00
#define MR1_CS6 0x01
#define MR1_CS7 0x02
#define MR1_CS8 0x03
#define MR1_PAREVEN 0x00
#define MR1_PARODD 0x04
#define MR1_PARENB 0x00
#define MR1_PARFORCE 0x08
#define MR1_PARNONE 0x10
#define MR1_PARSPECIAL 0x18
#define MR1_ERRCHAR 0x00
#define MR1_ERRBLOCK 0x20
#define MR1_ISRUNMASKED 0x00
#define MR1_ISRMASKED 0x40
#define MR1_AUTORTS 0x80
/*
* Mode register 2 bit definitions.
*/
#define MR2_STOP1 0x00
#define MR2_STOP15 0x01
#define MR2_STOP2 0x02
#define MR2_STOP916 0x03
#define MR2_RXFIFORDY 0x00
#define MR2_RXFIFOHALF 0x04
#define MR2_RXFIFOHIGH 0x08
#define MR2_RXFIFOFULL 0x0c
#define MR2_AUTOCTS 0x10
#define MR2_TXRTS 0x20
#define MR2_MODENORM 0x00
#define MR2_MODEAUTOECHO 0x40
#define MR2_MODELOOP 0x80
#define MR2_MODEREMECHO 0xc0
/*****************************************************************************/
/*
* Baud Rate Generator (BRG) selector values.
*/
#define BRG_50 0x00
#define BRG_75 0x01
#define BRG_150 0x02
#define BRG_200 0x03
#define BRG_300 0x04
#define BRG_450 0x05
#define BRG_600 0x06
#define BRG_900 0x07
#define BRG_1200 0x08
#define BRG_1800 0x09
#define BRG_2400 0x0a
#define BRG_3600 0x0b
#define BRG_4800 0x0c
#define BRG_7200 0x0d
#define BRG_9600 0x0e
#define BRG_14400 0x0f
#define BRG_19200 0x10
#define BRG_28200 0x11
#define BRG_38400 0x12
#define BRG_57600 0x13
#define BRG_115200 0x14
#define BRG_230400 0x15
#define BRG_GIN0 0x16
#define BRG_GIN1 0x17
#define BRG_CT0 0x18
#define BRG_CT1 0x19
#define BRG_RX2TX316 0x1b
#define BRG_RX2TX31 0x1c
#define SC26198_MAXBAUD 921600
/*****************************************************************************/
/*
* Command register command definitions.
*/
#define CR_NULL 0x04
#define CR_ADDRNORMAL 0x0c
#define CR_RXRESET 0x14
#define CR_TXRESET 0x1c
#define CR_CLEARRXERR 0x24
#define CR_BREAKRESET 0x2c
#define CR_TXSTARTBREAK 0x34
#define CR_TXSTOPBREAK 0x3c
#define CR_RTSON 0x44
#define CR_RTSOFF 0x4c
#define CR_ADDRINIT 0x5c
#define CR_RXERRBLOCK 0x6c
#define CR_TXSENDXON 0x84
#define CR_TXSENDXOFF 0x8c
#define CR_GANGXONSET 0x94
#define CR_GANGXOFFSET 0x9c
#define CR_GANGXONINIT 0xa4
#define CR_GANGXOFFINIT 0xac
#define CR_HOSTXON 0xb4
#define CR_HOSTXOFF 0xbc
#define CR_CANCELXOFF 0xc4
#define CR_ADDRRESET 0xdc
#define CR_RESETALLPORTS 0xf4
#define CR_RESETALL 0xfc
#define CR_RXENABLE 0x01
#define CR_TXENABLE 0x02
/*****************************************************************************/
/*
* Channel status register.
*/
#define SR_RXRDY 0x01
#define SR_RXFULL 0x02
#define SR_TXRDY 0x04
#define SR_TXEMPTY 0x08
#define SR_RXOVERRUN 0x10
#define SR_RXPARITY 0x20
#define SR_RXFRAMING 0x40
#define SR_RXBREAK 0x80
#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
/*****************************************************************************/
/*
* Interrupt status register and interrupt mask register bit definitions.
*/
#define IR_TXRDY 0x01
#define IR_RXRDY 0x02
#define IR_RXBREAK 0x04
#define IR_XONXOFF 0x10
#define IR_ADDRRECOG 0x20
#define IR_RXWATCHDOG 0x40
#define IR_IOPORT 0x80
/*****************************************************************************/
/*
* Interrupt vector register field definitions.
*/
#define IVR_CHANMASK 0x07
#define IVR_TYPEMASK 0x18
#define IVR_CONSTMASK 0xc0
#define IVR_RXDATA 0x10
#define IVR_RXBADDATA 0x18
#define IVR_TXDATA 0x08
#define IVR_OTHER 0x00
/*****************************************************************************/
/*
* BRG timer control register bit definitions.
*/
#define BRGCTCR_DISABCLK0 0x00
#define BRGCTCR_ENABCLK0 0x08
#define BRGCTCR_DISABCLK1 0x00
#define BRGCTCR_ENABCLK1 0x80
#define BRGCTCR_0SCLK16 0x00
#define BRGCTCR_0SCLK32 0x01
#define BRGCTCR_0SCLK64 0x02
#define BRGCTCR_0SCLK128 0x03
#define BRGCTCR_0X1 0x04
#define BRGCTCR_0X12 0x05
#define BRGCTCR_0IO1A 0x06
#define BRGCTCR_0GIN0 0x07
#define BRGCTCR_1SCLK16 0x00
#define BRGCTCR_1SCLK32 0x10
#define BRGCTCR_1SCLK64 0x20
#define BRGCTCR_1SCLK128 0x30
#define BRGCTCR_1X1 0x40
#define BRGCTCR_1X12 0x50
#define BRGCTCR_1IO1B 0x60
#define BRGCTCR_1GIN1 0x70
/*****************************************************************************/
/*
* Watch dog timer enable register.
*/
#define WDTRCR_ENABALL 0xff
/*****************************************************************************/
/*
* XON/XOFF interrupt status register.
*/
#define XISR_TXCHARMASK 0x03
#define XISR_TXCHARNORMAL 0x00
#define XISR_TXWAIT 0x01
#define XISR_TXXOFFPEND 0x02
#define XISR_TXXONPEND 0x03
#define XISR_TXFLOWMASK 0x0c
#define XISR_TXNORMAL 0x00
#define XISR_TXSTOPPEND 0x04
#define XISR_TXSTARTED 0x08
#define XISR_TXSTOPPED 0x0c
#define XISR_RXFLOWMASK 0x30
#define XISR_RXFLOWNONE 0x00
#define XISR_RXXONSENT 0x10
#define XISR_RXXOFFSENT 0x20
#define XISR_RXXONGOT 0x40
#define XISR_RXXOFFGOT 0x80
/*****************************************************************************/
/*
* Current interrupt register.
*/
#define CIR_TYPEMASK 0xc0
#define CIR_TYPEOTHER 0x00
#define CIR_TYPETX 0x40
#define CIR_TYPERXGOOD 0x80
#define CIR_TYPERXBAD 0xc0
#define CIR_RXDATA 0x80
#define CIR_RXBADDATA 0x40
#define CIR_TXDATA 0x40
#define CIR_CHANMASK 0x07
#define CIR_CNTMASK 0x38
#define CIR_SUBTYPEMASK 0x38
#define CIR_SUBNONE 0x00
#define CIR_SUBCOS 0x08
#define CIR_SUBADDR 0x10
#define CIR_SUBXONXOFF 0x18
#define CIR_SUBBREAK 0x28
/*****************************************************************************/
/*
* Global interrupting channel register.
*/
#define GICR_CHANMASK 0x07
/*****************************************************************************/
/*
* Global interrupting byte count register.
*/
#define GICR_COUNTMASK 0x0f
/*****************************************************************************/
/*
* Global interrupting type register.
*/
#define GITR_RXMASK 0xc0
#define GITR_RXNONE 0x00
#define GITR_RXBADDATA 0x80
#define GITR_RXGOODDATA 0xc0
#define GITR_TXDATA 0x20
#define GITR_SUBTYPEMASK 0x07
#define GITR_SUBNONE 0x00
#define GITR_SUBCOS 0x01
#define GITR_SUBADDR 0x02
#define GITR_SUBXONXOFF 0x03
#define GITR_SUBBREAK 0x05
/*****************************************************************************/
/*
* Input port change register.
*/
#define IPR_CTS 0x01
#define IPR_DTR 0x02
#define IPR_RTS 0x04
#define IPR_DCD 0x08
#define IPR_CTSCHANGE 0x10
#define IPR_DTRCHANGE 0x20
#define IPR_RTSCHANGE 0x40
#define IPR_DCDCHANGE 0x80
#define IPR_CHANGEMASK 0xf0
/*****************************************************************************/
/*
* IO port interrupt and output register.
*/
#define IOPR_CTS 0x01
#define IOPR_DTR 0x02
#define IOPR_RTS 0x04
#define IOPR_DCD 0x08
#define IOPR_CTSCOS 0x10
#define IOPR_DTRCOS 0x20
#define IOPR_RTSCOS 0x40
#define IOPR_DCDCOS 0x80
/*****************************************************************************/
/*
* IO port configuration register.
*/
#define IOPCR_SETCTS 0x00
#define IOPCR_SETDTR 0x04
#define IOPCR_SETRTS 0x10
#define IOPCR_SETDCD 0x00
#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
/*****************************************************************************/
/*
* General purpose output select register.
*/
#define GPORS_TXC1XA 0x08
#define GPORS_TXC16XA 0x09
#define GPORS_RXC16XA 0x0a
#define GPORS_TXC16XB 0x0b
#define GPORS_GPOR3 0x0c
#define GPORS_GPOR2 0x0d
#define GPORS_GPOR1 0x0e
#define GPORS_GPOR0 0x0f
/*****************************************************************************/
/*
* General purpose output register.
*/
#define GPOR_0 0x01
#define GPOR_1 0x02
#define GPOR_2 0x04
#define GPOR_3 0x08
/*****************************************************************************/
/*
* General purpose output clock register.
*/
#define GPORC_0NONE 0x00
#define GPORC_0GIN0 0x01
#define GPORC_0GIN1 0x02
#define GPORC_0IO3A 0x02
#define GPORC_1NONE 0x00
#define GPORC_1GIN0 0x04
#define GPORC_1GIN1 0x08
#define GPORC_1IO3C 0x0c
#define GPORC_2NONE 0x00
#define GPORC_2GIN0 0x10
#define GPORC_2GIN1 0x20
#define GPORC_2IO3E 0x20
#define GPORC_3NONE 0x00
#define GPORC_3GIN0 0x40
#define GPORC_3GIN1 0x80
#define GPORC_3IO3G 0xc0
/*****************************************************************************/
/*
* General purpose output data register.
*/
#define GPOD_0MASK 0x03
#define GPOD_0SET1 0x00
#define GPOD_0SET0 0x01
#define GPOD_0SETR0 0x02
#define GPOD_0SETIO3B 0x03
#define GPOD_1MASK 0x0c
#define GPOD_1SET1 0x00
#define GPOD_1SET0 0x04
#define GPOD_1SETR0 0x08
#define GPOD_1SETIO3D 0x0c
#define GPOD_2MASK 0x30
#define GPOD_2SET1 0x00
#define GPOD_2SET0 0x10
#define GPOD_2SETR0 0x20
#define GPOD_2SETIO3F 0x30
#define GPOD_3MASK 0xc0
#define GPOD_3SET1 0x00
#define GPOD_3SET0 0x40
#define GPOD_3SETR0 0x80
#define GPOD_3SETIO3H 0xc0
/*****************************************************************************/
#endif