davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
dcd6c92267
kernel-ark/arch/arm/configs/integrator_defconfig

83 lines
1.7 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_TINY_RCU=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 05:12:18 +00:00
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_ARCH_INTEGRATOR_CP=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_CPU_ARM720T=y
CONFIG_CPU_ARM920T=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_CPU_ARM922T=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_ARM1020=y
CONFIG_CPU_ARM1022=y
CONFIG_CPU_ARM1026=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_PCI=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_FPE_NWFPE=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 05:12:18 +00:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_MTD_PHYSMAP=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 05:41:19 +00:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL030=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_EXT2_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 05:12:18 +00:00
CONFIG_ROOT_NFS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAGIC_SYSRQ=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 05:12:18 +00:00
CONFIG_DEBUG_KERNEL=y
Reference in New Issue Copy Permalink