2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
|
|
|
|
* GT64260, MV64340, MV64360, GT96100, ... ).
|
|
|
|
*
|
|
|
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
|
|
|
*
|
|
|
|
* Based on an old MPSC driver that was in the linuxppc tree. It appears to
|
|
|
|
* have been created by Chris Zankel (formerly of MontaVista) but there
|
|
|
|
* is no proper Copyright so I'm not sure. Apparently, parts were also
|
|
|
|
* taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c
|
|
|
|
* by Russell King.
|
|
|
|
*
|
|
|
|
* 2004 (c) MontaVista, Software, Inc. This file is licensed under
|
|
|
|
* the terms of the GNU General Public License version 2. This program
|
|
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
|
|
* or implied.
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* The MPSC interface is much like a typical network controller's interface.
|
|
|
|
* That is, you set up separate rings of descriptors for transmitting and
|
|
|
|
* receiving data. There is also a pool of buffers with (one buffer per
|
|
|
|
* descriptor) that incoming data are dma'd into or outgoing data are dma'd
|
|
|
|
* out of.
|
|
|
|
*
|
|
|
|
* The MPSC requires two other controllers to be able to work. The Baud Rate
|
|
|
|
* Generator (BRG) provides a clock at programmable frequencies which determines
|
|
|
|
* the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the
|
|
|
|
* MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
|
|
|
|
* MPSC. It is actually the SDMA interrupt that the driver uses to keep the
|
|
|
|
* transmit and receive "engines" going (i.e., indicate data has been
|
|
|
|
* transmitted or received).
|
|
|
|
*
|
|
|
|
* NOTES:
|
|
|
|
*
|
|
|
|
* 1) Some chips have an erratum where several regs cannot be
|
|
|
|
* read. To work around that, we keep a local copy of those regs in
|
|
|
|
* 'mpsc_port_info'.
|
|
|
|
*
|
|
|
|
* 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
|
|
|
|
* accesses system mem with coherency enabled. For that reason, the driver
|
|
|
|
* assumes that coherency for that ctlr has been disabled. This means
|
|
|
|
* that when in a cache coherent system, the driver has to manually manage
|
|
|
|
* the data cache on the areas that it touches because the dma_* macro are
|
|
|
|
* basically no-ops.
|
|
|
|
*
|
|
|
|
* 3) There is an erratum (on PPC) where you can't use the instruction to do
|
|
|
|
* a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
|
|
|
|
* where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
|
|
|
|
*
|
|
|
|
* 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
|
|
|
|
*/
|
|
|
|
|
2006-03-25 11:08:28 +00:00
|
|
|
|
|
|
|
#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
|
|
#define SUPPORT_SYSRQ
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include <linux/tty.h>
|
|
|
|
#include <linux/tty_flip.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/console.h>
|
|
|
|
#include <linux/sysrq.h>
|
|
|
|
#include <linux/serial.h>
|
|
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/mv643xx.h>
|
2005-10-29 18:07:23 +00:00
|
|
|
#include <linux/platform_device.h>
|
|
|
|
|
2006-03-25 11:08:28 +00:00
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
|
|
|
|
#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
|
|
#define SUPPORT_SYSRQ
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define MPSC_NUM_CTLRS 2
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Descriptors and buffers must be cache line aligned.
|
|
|
|
* Buffers lengths must be multiple of cache line size.
|
|
|
|
* Number of Tx & Rx descriptors must be powers of 2.
|
|
|
|
*/
|
|
|
|
#define MPSC_RXR_ENTRIES 32
|
|
|
|
#define MPSC_RXRE_SIZE dma_get_cache_alignment()
|
|
|
|
#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
|
|
|
|
#define MPSC_RXBE_SIZE dma_get_cache_alignment()
|
|
|
|
#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)
|
|
|
|
|
|
|
|
#define MPSC_TXR_ENTRIES 32
|
|
|
|
#define MPSC_TXRE_SIZE dma_get_cache_alignment()
|
|
|
|
#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
|
|
|
|
#define MPSC_TXBE_SIZE dma_get_cache_alignment()
|
|
|
|
#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)
|
|
|
|
|
|
|
|
#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \
|
|
|
|
MPSC_TXR_SIZE + MPSC_TXB_SIZE + \
|
|
|
|
dma_get_cache_alignment() /* for alignment */)
|
|
|
|
|
|
|
|
/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
|
|
|
|
struct mpsc_rx_desc {
|
|
|
|
u16 bufsize;
|
|
|
|
u16 bytecnt;
|
|
|
|
u32 cmdstat;
|
|
|
|
u32 link;
|
|
|
|
u32 buf_ptr;
|
|
|
|
} __attribute((packed));
|
|
|
|
|
|
|
|
struct mpsc_tx_desc {
|
|
|
|
u16 bytecnt;
|
|
|
|
u16 shadow;
|
|
|
|
u32 cmdstat;
|
|
|
|
u32 link;
|
|
|
|
u32 buf_ptr;
|
|
|
|
} __attribute((packed));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Some regs that have the erratum that you can't read them are are shared
|
|
|
|
* between the two MPSC controllers. This struct contains those shared regs.
|
|
|
|
*/
|
|
|
|
struct mpsc_shared_regs {
|
|
|
|
phys_addr_t mpsc_routing_base_p;
|
|
|
|
phys_addr_t sdma_intr_base_p;
|
|
|
|
|
|
|
|
void __iomem *mpsc_routing_base;
|
|
|
|
void __iomem *sdma_intr_base;
|
|
|
|
|
|
|
|
u32 MPSC_MRR_m;
|
|
|
|
u32 MPSC_RCRR_m;
|
|
|
|
u32 MPSC_TCRR_m;
|
|
|
|
u32 SDMA_INTR_CAUSE_m;
|
|
|
|
u32 SDMA_INTR_MASK_m;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* The main driver data structure */
|
|
|
|
struct mpsc_port_info {
|
|
|
|
struct uart_port port; /* Overlay uart_port structure */
|
|
|
|
|
|
|
|
/* Internal driver state for this ctlr */
|
|
|
|
u8 ready;
|
|
|
|
u8 rcv_data;
|
|
|
|
tcflag_t c_iflag; /* save termios->c_iflag */
|
|
|
|
tcflag_t c_cflag; /* save termios->c_cflag */
|
|
|
|
|
|
|
|
/* Info passed in from platform */
|
|
|
|
u8 mirror_regs; /* Need to mirror regs? */
|
|
|
|
u8 cache_mgmt; /* Need manual cache mgmt? */
|
|
|
|
u8 brg_can_tune; /* BRG has baud tuning? */
|
|
|
|
u32 brg_clk_src;
|
|
|
|
u16 mpsc_max_idle;
|
|
|
|
int default_baud;
|
|
|
|
int default_bits;
|
|
|
|
int default_parity;
|
|
|
|
int default_flow;
|
|
|
|
|
|
|
|
/* Physical addresses of various blocks of registers (from platform) */
|
|
|
|
phys_addr_t mpsc_base_p;
|
|
|
|
phys_addr_t sdma_base_p;
|
|
|
|
phys_addr_t brg_base_p;
|
|
|
|
|
|
|
|
/* Virtual addresses of various blocks of registers (from platform) */
|
|
|
|
void __iomem *mpsc_base;
|
|
|
|
void __iomem *sdma_base;
|
|
|
|
void __iomem *brg_base;
|
|
|
|
|
|
|
|
/* Descriptor ring and buffer allocations */
|
|
|
|
void *dma_region;
|
|
|
|
dma_addr_t dma_region_p;
|
|
|
|
|
|
|
|
dma_addr_t rxr; /* Rx descriptor ring */
|
|
|
|
dma_addr_t rxr_p; /* Phys addr of rxr */
|
|
|
|
u8 *rxb; /* Rx Ring I/O buf */
|
|
|
|
u8 *rxb_p; /* Phys addr of rxb */
|
|
|
|
u32 rxr_posn; /* First desc w/ Rx data */
|
|
|
|
|
|
|
|
dma_addr_t txr; /* Tx descriptor ring */
|
|
|
|
dma_addr_t txr_p; /* Phys addr of txr */
|
|
|
|
u8 *txb; /* Tx Ring I/O buf */
|
|
|
|
u8 *txb_p; /* Phys addr of txb */
|
|
|
|
int txr_head; /* Where new data goes */
|
|
|
|
int txr_tail; /* Where sent data comes off */
|
|
|
|
|
|
|
|
/* Mirrored values of regs we can't read (if 'mirror_regs' set) */
|
|
|
|
u32 MPSC_MPCR_m;
|
|
|
|
u32 MPSC_CHR_1_m;
|
|
|
|
u32 MPSC_CHR_2_m;
|
|
|
|
u32 MPSC_CHR_10_m;
|
|
|
|
u32 BRG_BCR_m;
|
|
|
|
struct mpsc_shared_regs *shared_regs;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Hooks to platform-specific code */
|
|
|
|
int mpsc_platform_register_driver(void);
|
|
|
|
void mpsc_platform_unregister_driver(void);
|
|
|
|
|
|
|
|
/* Hooks back in to mpsc common to be called by platform-specific code */
|
|
|
|
struct mpsc_port_info *mpsc_device_probe(int index);
|
|
|
|
struct mpsc_port_info *mpsc_device_remove(int index);
|
|
|
|
|
|
|
|
/* Main MPSC Configuration Register Offsets */
|
|
|
|
#define MPSC_MMCRL 0x0000
|
|
|
|
#define MPSC_MMCRH 0x0004
|
|
|
|
#define MPSC_MPCR 0x0008
|
|
|
|
#define MPSC_CHR_1 0x000c
|
|
|
|
#define MPSC_CHR_2 0x0010
|
|
|
|
#define MPSC_CHR_3 0x0014
|
|
|
|
#define MPSC_CHR_4 0x0018
|
|
|
|
#define MPSC_CHR_5 0x001c
|
|
|
|
#define MPSC_CHR_6 0x0020
|
|
|
|
#define MPSC_CHR_7 0x0024
|
|
|
|
#define MPSC_CHR_8 0x0028
|
|
|
|
#define MPSC_CHR_9 0x002c
|
|
|
|
#define MPSC_CHR_10 0x0030
|
|
|
|
#define MPSC_CHR_11 0x0034
|
|
|
|
|
|
|
|
#define MPSC_MPCR_FRZ (1 << 9)
|
|
|
|
#define MPSC_MPCR_CL_5 0
|
|
|
|
#define MPSC_MPCR_CL_6 1
|
|
|
|
#define MPSC_MPCR_CL_7 2
|
|
|
|
#define MPSC_MPCR_CL_8 3
|
|
|
|
#define MPSC_MPCR_SBL_1 0
|
|
|
|
#define MPSC_MPCR_SBL_2 1
|
|
|
|
|
|
|
|
#define MPSC_CHR_2_TEV (1<<1)
|
|
|
|
#define MPSC_CHR_2_TA (1<<7)
|
|
|
|
#define MPSC_CHR_2_TTCS (1<<9)
|
|
|
|
#define MPSC_CHR_2_REV (1<<17)
|
|
|
|
#define MPSC_CHR_2_RA (1<<23)
|
|
|
|
#define MPSC_CHR_2_CRD (1<<25)
|
|
|
|
#define MPSC_CHR_2_EH (1<<31)
|
|
|
|
#define MPSC_CHR_2_PAR_ODD 0
|
|
|
|
#define MPSC_CHR_2_PAR_SPACE 1
|
|
|
|
#define MPSC_CHR_2_PAR_EVEN 2
|
|
|
|
#define MPSC_CHR_2_PAR_MARK 3
|
|
|
|
|
|
|
|
/* MPSC Signal Routing */
|
|
|
|
#define MPSC_MRR 0x0000
|
|
|
|
#define MPSC_RCRR 0x0004
|
|
|
|
#define MPSC_TCRR 0x0008
|
|
|
|
|
|
|
|
/* Serial DMA Controller Interface Registers */
|
|
|
|
#define SDMA_SDC 0x0000
|
|
|
|
#define SDMA_SDCM 0x0008
|
|
|
|
#define SDMA_RX_DESC 0x0800
|
|
|
|
#define SDMA_RX_BUF_PTR 0x0808
|
|
|
|
#define SDMA_SCRDP 0x0810
|
|
|
|
#define SDMA_TX_DESC 0x0c00
|
|
|
|
#define SDMA_SCTDP 0x0c10
|
|
|
|
#define SDMA_SFTDP 0x0c14
|
|
|
|
|
|
|
|
#define SDMA_DESC_CMDSTAT_PE (1<<0)
|
|
|
|
#define SDMA_DESC_CMDSTAT_CDL (1<<1)
|
|
|
|
#define SDMA_DESC_CMDSTAT_FR (1<<3)
|
|
|
|
#define SDMA_DESC_CMDSTAT_OR (1<<6)
|
|
|
|
#define SDMA_DESC_CMDSTAT_BR (1<<9)
|
|
|
|
#define SDMA_DESC_CMDSTAT_MI (1<<10)
|
|
|
|
#define SDMA_DESC_CMDSTAT_A (1<<11)
|
|
|
|
#define SDMA_DESC_CMDSTAT_AM (1<<12)
|
|
|
|
#define SDMA_DESC_CMDSTAT_CT (1<<13)
|
|
|
|
#define SDMA_DESC_CMDSTAT_C (1<<14)
|
|
|
|
#define SDMA_DESC_CMDSTAT_ES (1<<15)
|
|
|
|
#define SDMA_DESC_CMDSTAT_L (1<<16)
|
|
|
|
#define SDMA_DESC_CMDSTAT_F (1<<17)
|
|
|
|
#define SDMA_DESC_CMDSTAT_P (1<<18)
|
|
|
|
#define SDMA_DESC_CMDSTAT_EI (1<<23)
|
|
|
|
#define SDMA_DESC_CMDSTAT_O (1<<31)
|
|
|
|
|
|
|
|
#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \
|
|
|
|
SDMA_DESC_CMDSTAT_EI)
|
|
|
|
|
|
|
|
#define SDMA_SDC_RFT (1<<0)
|
|
|
|
#define SDMA_SDC_SFM (1<<1)
|
|
|
|
#define SDMA_SDC_BLMR (1<<6)
|
|
|
|
#define SDMA_SDC_BLMT (1<<7)
|
|
|
|
#define SDMA_SDC_POVR (1<<8)
|
|
|
|
#define SDMA_SDC_RIFB (1<<9)
|
|
|
|
|
|
|
|
#define SDMA_SDCM_ERD (1<<7)
|
|
|
|
#define SDMA_SDCM_AR (1<<15)
|
|
|
|
#define SDMA_SDCM_STD (1<<16)
|
|
|
|
#define SDMA_SDCM_TXD (1<<23)
|
|
|
|
#define SDMA_SDCM_AT (1<<31)
|
|
|
|
|
|
|
|
#define SDMA_0_CAUSE_RXBUF (1<<0)
|
|
|
|
#define SDMA_0_CAUSE_RXERR (1<<1)
|
|
|
|
#define SDMA_0_CAUSE_TXBUF (1<<2)
|
|
|
|
#define SDMA_0_CAUSE_TXEND (1<<3)
|
|
|
|
#define SDMA_1_CAUSE_RXBUF (1<<8)
|
|
|
|
#define SDMA_1_CAUSE_RXERR (1<<9)
|
|
|
|
#define SDMA_1_CAUSE_TXBUF (1<<10)
|
|
|
|
#define SDMA_1_CAUSE_TXEND (1<<11)
|
|
|
|
|
|
|
|
#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
|
|
|
|
SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
|
|
|
|
#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
|
|
|
|
SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
|
|
|
|
|
|
|
|
/* SDMA Interrupt registers */
|
|
|
|
#define SDMA_INTR_CAUSE 0x0000
|
|
|
|
#define SDMA_INTR_MASK 0x0080
|
|
|
|
|
|
|
|
/* Baud Rate Generator Interface Registers */
|
|
|
|
#define BRG_BCR 0x0000
|
|
|
|
#define BRG_BTR 0x0004
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Define how this driver is known to the outside (we've been assigned a
|
|
|
|
* range on the "Low-density serial ports" major).
|
|
|
|
*/
|
|
|
|
#define MPSC_MAJOR 204
|
|
|
|
#define MPSC_MINOR_START 44
|
|
|
|
#define MPSC_DRIVER_NAME "MPSC"
|
|
|
|
#define MPSC_DEV_NAME "ttyMM"
|
|
|
|
#define MPSC_VERSION "1.00"
|
|
|
|
|
|
|
|
static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
|
|
|
|
static struct mpsc_shared_regs mpsc_shared_regs;
|
2005-06-25 21:55:36 +00:00
|
|
|
static struct uart_driver mpsc_reg;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-06-25 21:55:36 +00:00
|
|
|
static void mpsc_start_rx(struct mpsc_port_info *pi);
|
|
|
|
static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
|
|
|
|
static void mpsc_release_port(struct uart_port *port);
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Baud Rate Generator Routines (BRG)
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
|
|
v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
|
|
|
|
|
|
|
|
if (pi->brg_can_tune)
|
|
|
|
v &= ~(1 << 25);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->BRG_BCR_m = v;
|
|
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
|
|
|
|
|
|
writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
|
|
|
|
pi->brg_base + BRG_BTR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_brg_enable(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
|
|
v |= (1 << 16);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->BRG_BCR_m = v;
|
|
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_brg_disable(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
|
|
v &= ~(1 << 16);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->BRG_BCR_m = v;
|
|
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* To set the baud, we adjust the CDV field in the BRG_BCR reg.
|
|
|
|
* From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
|
|
|
|
* However, the input clock is divided by 16 in the MPSC b/c of how
|
|
|
|
* 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
|
|
|
|
* calculation by 16 to account for that. So the real calculation
|
|
|
|
* that accounts for the way the mpsc is set up is:
|
|
|
|
* CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
|
|
|
|
*/
|
|
|
|
u32 cdv = (pi->port.uartclk / (baud << 5)) - 1;
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
mpsc_brg_disable(pi);
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
|
|
v = (v & 0xffff0000) | (cdv & 0xffff);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->BRG_BCR_m = v;
|
|
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
|
|
mpsc_brg_enable(pi);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Serial DMA Routines (SDMA)
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
|
|
|
|
pi->port.line, burst_size);
|
|
|
|
|
|
|
|
burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
|
|
|
|
|
|
|
|
if (burst_size < 2)
|
|
|
|
v = 0x0; /* 1 64-bit word */
|
|
|
|
else if (burst_size < 4)
|
|
|
|
v = 0x1; /* 2 64-bit words */
|
|
|
|
else if (burst_size < 8)
|
|
|
|
v = 0x2; /* 4 64-bit words */
|
|
|
|
else
|
|
|
|
v = 0x3; /* 8 64-bit words */
|
|
|
|
|
|
|
|
writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
|
|
|
|
pi->sdma_base + SDMA_SDC);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
|
|
|
|
burst_size);
|
|
|
|
|
|
|
|
writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
|
|
|
|
pi->sdma_base + SDMA_SDC);
|
|
|
|
mpsc_sdma_burstsize(pi, burst_size);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32
|
|
|
|
mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
|
|
|
|
{
|
|
|
|
u32 old, v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
|
|
|
|
|
|
|
|
old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
|
|
|
|
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
|
|
|
|
mask &= 0xf;
|
|
|
|
if (pi->port.line)
|
|
|
|
mask <<= 8;
|
|
|
|
v &= ~mask;
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->shared_regs->SDMA_INTR_MASK_m = v;
|
|
|
|
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
|
|
|
|
if (pi->port.line)
|
|
|
|
old >>= 8;
|
|
|
|
return old & 0xf;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
|
|
|
|
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
|
|
|
|
mask &= 0xf;
|
|
|
|
if (pi->port.line)
|
|
|
|
mask <<= 8;
|
|
|
|
v |= mask;
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->shared_regs->SDMA_INTR_MASK_m = v;
|
|
|
|
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
|
|
|
|
writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, struct mpsc_rx_desc *rxre_p)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
|
|
|
|
pi->port.line, (u32) rxre_p);
|
|
|
|
|
|
|
|
writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, struct mpsc_tx_desc *txre_p)
|
|
|
|
{
|
|
|
|
writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
|
|
|
|
writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
v = readl(pi->sdma_base + SDMA_SDCM);
|
|
|
|
if (val)
|
|
|
|
v |= val;
|
|
|
|
else
|
|
|
|
v = 0;
|
|
|
|
wmb();
|
|
|
|
writel(v, pi->sdma_base + SDMA_SDCM);
|
|
|
|
wmb();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline uint
|
|
|
|
mpsc_sdma_tx_active(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_start_tx(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
struct mpsc_tx_desc *txre, *txre_p;
|
|
|
|
|
|
|
|
/* If tx isn't running & there's a desc ready to go, start it */
|
|
|
|
if (!mpsc_sdma_tx_active(pi)) {
|
|
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
|
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
|
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
invalidate_dcache_range((ulong)txre,
|
|
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
|
|
|
|
txre_p = (struct mpsc_tx_desc *)(pi->txr_p +
|
|
|
|
(pi->txr_tail *
|
|
|
|
MPSC_TXRE_SIZE));
|
|
|
|
|
|
|
|
mpsc_sdma_set_tx_ring(pi, txre_p);
|
|
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_sdma_stop(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
|
|
|
|
|
|
|
|
/* Abort any SDMA transfers */
|
|
|
|
mpsc_sdma_cmd(pi, 0);
|
|
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
|
|
|
|
|
|
|
|
/* Clear the SDMA current and first TX and RX pointers */
|
2005-04-26 01:32:12 +00:00
|
|
|
mpsc_sdma_set_tx_ring(pi, NULL);
|
|
|
|
mpsc_sdma_set_rx_ring(pi, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Disable interrupts */
|
|
|
|
mpsc_sdma_intr_mask(pi, 0xf);
|
|
|
|
mpsc_sdma_intr_ack(pi);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Multi-Protocol Serial Controller Routines (MPSC)
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_hw_init(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
|
|
|
|
|
|
|
|
/* Set up clock routing */
|
|
|
|
if (pi->mirror_regs) {
|
|
|
|
v = pi->shared_regs->MPSC_MRR_m;
|
|
|
|
v &= ~0x1c7;
|
|
|
|
pi->shared_regs->MPSC_MRR_m = v;
|
|
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
|
|
|
|
|
|
|
v = pi->shared_regs->MPSC_RCRR_m;
|
|
|
|
v = (v & ~0xf0f) | 0x100;
|
|
|
|
pi->shared_regs->MPSC_RCRR_m = v;
|
|
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
|
|
|
|
|
|
|
v = pi->shared_regs->MPSC_TCRR_m;
|
|
|
|
v = (v & ~0xf0f) | 0x100;
|
|
|
|
pi->shared_regs->MPSC_TCRR_m = v;
|
|
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
|
|
|
v &= ~0x1c7;
|
|
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
|
|
|
|
|
|
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
|
|
|
v = (v & ~0xf0f) | 0x100;
|
|
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
|
|
|
|
|
|
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
|
|
|
v = (v & ~0xf0f) | 0x100;
|
|
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Put MPSC in UART mode & enabel Tx/Rx egines */
|
|
|
|
writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
|
|
|
|
|
|
|
|
/* No preamble, 16x divider, low-latency, */
|
|
|
|
writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
|
|
|
|
|
|
|
|
if (pi->mirror_regs) {
|
|
|
|
pi->MPSC_CHR_1_m = 0;
|
|
|
|
pi->MPSC_CHR_2_m = 0;
|
|
|
|
}
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_1);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_4);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_5);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_6);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_7);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_8);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_9);
|
|
|
|
writel(0, pi->mpsc_base + MPSC_CHR_10);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_enter_hunt(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
|
|
|
|
|
|
|
|
if (pi->mirror_regs) {
|
|
|
|
writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
|
|
|
|
pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
/* Erratum prevents reading CHR_2 so just delay for a while */
|
|
|
|
udelay(100);
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
|
|
|
|
pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
|
|
|
|
while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
|
|
|
|
udelay(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_freeze(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
|
|
v |= MPSC_MPCR_FRZ;
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->MPSC_MPCR_m = v;
|
|
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_unfreeze(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
|
|
v &= ~MPSC_MPCR_FRZ;
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->MPSC_MPCR_m = v;
|
|
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
|
|
|
|
|
|
pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
|
|
v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->MPSC_MPCR_m = v;
|
|
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
|
|
|
|
pi->port.line, len);
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
|
|
|
|
|
|
v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->MPSC_MPCR_m = v;
|
|
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
|
|
|
|
{
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
|
|
|
|
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
|
|
|
|
readl(pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
|
|
|
|
p &= 0x3;
|
|
|
|
v = (v & ~0xc000c) | (p << 18) | (p << 2);
|
|
|
|
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->MPSC_CHR_2_m = v;
|
|
|
|
writel(v, pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Driver Init Routines
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_init_hw(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
|
|
|
|
|
|
|
|
mpsc_brg_init(pi, pi->brg_clk_src);
|
|
|
|
mpsc_brg_enable(pi);
|
|
|
|
mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */
|
|
|
|
mpsc_sdma_stop(pi);
|
|
|
|
mpsc_hw_init(pi);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
|
|
|
|
pi->port.line);
|
|
|
|
|
|
|
|
if (!pi->dma_region) {
|
|
|
|
if (!dma_supported(pi->port.dev, 0xffffffff)) {
|
|
|
|
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
|
|
|
|
rc = -ENXIO;
|
|
|
|
}
|
|
|
|
else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
|
|
|
|
MPSC_DMA_ALLOC_SIZE, &pi->dma_region_p, GFP_KERNEL))
|
|
|
|
== NULL) {
|
|
|
|
|
|
|
|
printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
|
|
|
|
rc = -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_free_ring_mem(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
|
|
|
|
|
|
|
|
if (pi->dma_region) {
|
|
|
|
dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
|
|
|
|
pi->dma_region, pi->dma_region_p);
|
|
|
|
pi->dma_region = NULL;
|
|
|
|
pi->dma_region_p = (dma_addr_t) NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_init_rings(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
struct mpsc_rx_desc *rxre;
|
|
|
|
struct mpsc_tx_desc *txre;
|
|
|
|
dma_addr_t dp, dp_p;
|
|
|
|
u8 *bp, *bp_p;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
|
|
|
|
|
|
|
|
BUG_ON(pi->dma_region == NULL);
|
|
|
|
|
|
|
|
memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Descriptors & buffers are multiples of cacheline size and must be
|
|
|
|
* cacheline aligned.
|
|
|
|
*/
|
|
|
|
dp = ALIGN((u32) pi->dma_region, dma_get_cache_alignment());
|
|
|
|
dp_p = ALIGN((u32) pi->dma_region_p, dma_get_cache_alignment());
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Partition dma region into rx ring descriptor, rx buffers,
|
|
|
|
* tx ring descriptors, and tx buffers.
|
|
|
|
*/
|
|
|
|
pi->rxr = dp;
|
|
|
|
pi->rxr_p = dp_p;
|
|
|
|
dp += MPSC_RXR_SIZE;
|
|
|
|
dp_p += MPSC_RXR_SIZE;
|
|
|
|
|
|
|
|
pi->rxb = (u8 *) dp;
|
|
|
|
pi->rxb_p = (u8 *) dp_p;
|
|
|
|
dp += MPSC_RXB_SIZE;
|
|
|
|
dp_p += MPSC_RXB_SIZE;
|
|
|
|
|
|
|
|
pi->rxr_posn = 0;
|
|
|
|
|
|
|
|
pi->txr = dp;
|
|
|
|
pi->txr_p = dp_p;
|
|
|
|
dp += MPSC_TXR_SIZE;
|
|
|
|
dp_p += MPSC_TXR_SIZE;
|
|
|
|
|
|
|
|
pi->txb = (u8 *) dp;
|
|
|
|
pi->txb_p = (u8 *) dp_p;
|
|
|
|
|
|
|
|
pi->txr_head = 0;
|
|
|
|
pi->txr_tail = 0;
|
|
|
|
|
|
|
|
/* Init rx ring descriptors */
|
|
|
|
dp = pi->rxr;
|
|
|
|
dp_p = pi->rxr_p;
|
|
|
|
bp = pi->rxb;
|
|
|
|
bp_p = pi->rxb_p;
|
|
|
|
|
|
|
|
for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
|
|
|
|
rxre = (struct mpsc_rx_desc *)dp;
|
|
|
|
|
|
|
|
rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
|
|
|
|
rxre->bytecnt = cpu_to_be16(0);
|
|
|
|
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
|
|
|
|
SDMA_DESC_CMDSTAT_EI |
|
|
|
|
SDMA_DESC_CMDSTAT_F |
|
|
|
|
SDMA_DESC_CMDSTAT_L);
|
|
|
|
rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
|
|
|
|
rxre->buf_ptr = cpu_to_be32(bp_p);
|
|
|
|
|
|
|
|
dp += MPSC_RXRE_SIZE;
|
|
|
|
dp_p += MPSC_RXRE_SIZE;
|
|
|
|
bp += MPSC_RXBE_SIZE;
|
|
|
|
bp_p += MPSC_RXBE_SIZE;
|
|
|
|
}
|
|
|
|
rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */
|
|
|
|
|
|
|
|
/* Init tx ring descriptors */
|
|
|
|
dp = pi->txr;
|
|
|
|
dp_p = pi->txr_p;
|
|
|
|
bp = pi->txb;
|
|
|
|
bp_p = pi->txb_p;
|
|
|
|
|
|
|
|
for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
|
|
|
|
txre = (struct mpsc_tx_desc *)dp;
|
|
|
|
|
|
|
|
txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
|
|
|
|
txre->buf_ptr = cpu_to_be32(bp_p);
|
|
|
|
|
|
|
|
dp += MPSC_TXRE_SIZE;
|
|
|
|
dp_p += MPSC_TXRE_SIZE;
|
|
|
|
bp += MPSC_TXBE_SIZE;
|
|
|
|
bp_p += MPSC_TXBE_SIZE;
|
|
|
|
}
|
|
|
|
txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */
|
|
|
|
|
|
|
|
dma_cache_sync((void *) pi->dma_region, MPSC_DMA_ALLOC_SIZE,
|
|
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
flush_dcache_range((ulong)pi->dma_region,
|
|
|
|
(ulong)pi->dma_region + MPSC_DMA_ALLOC_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_uninit_rings(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
|
|
|
|
|
|
|
|
BUG_ON(pi->dma_region == NULL);
|
|
|
|
|
|
|
|
pi->rxr = 0;
|
|
|
|
pi->rxr_p = 0;
|
|
|
|
pi->rxb = NULL;
|
|
|
|
pi->rxb_p = NULL;
|
|
|
|
pi->rxr_posn = 0;
|
|
|
|
|
|
|
|
pi->txr = 0;
|
|
|
|
pi->txr_p = 0;
|
|
|
|
pi->txb = NULL;
|
|
|
|
pi->txb_p = NULL;
|
|
|
|
pi->txr_head = 0;
|
|
|
|
pi->txr_tail = 0;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_make_ready(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
|
|
|
|
|
|
|
|
if (!pi->ready) {
|
|
|
|
mpsc_init_hw(pi);
|
|
|
|
if ((rc = mpsc_alloc_ring_mem(pi)))
|
|
|
|
return rc;
|
|
|
|
mpsc_init_rings(pi);
|
|
|
|
pi->ready = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Interrupt Handling Routines
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
mpsc_rx_intr(struct mpsc_port_info *pi, struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
struct mpsc_rx_desc *rxre;
|
|
|
|
struct tty_struct *tty = pi->port.info->tty;
|
|
|
|
u32 cmdstat, bytes_in, i;
|
|
|
|
int rc = 0;
|
|
|
|
u8 *bp;
|
|
|
|
char flag = TTY_NORMAL;
|
|
|
|
|
|
|
|
pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
|
|
|
|
|
|
|
|
rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
|
|
|
|
|
|
|
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
invalidate_dcache_range((ulong)rxre,
|
|
|
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Loop through Rx descriptors handling ones that have been completed.
|
|
|
|
*/
|
|
|
|
while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)){
|
|
|
|
bytes_in = be16_to_cpu(rxre->bytecnt);
|
|
|
|
|
|
|
|
/* Following use of tty struct directly is deprecated */
|
[PATCH] TTY layer buffering revamp
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.
This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.
When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.
For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).
Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.
The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.
I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.
Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real. That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.
Description:
tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification]. It
does now also return the number of chars inserted
There are also
tty_buffer_request_room(tty, len)
which asks for a buffer block of the length requested and returns the space
found. This improves efficiency with hardware that knows how much to
transfer.
and tty_insert_flip_string_flags(tty, str, flags, len)
to insert a string of characters and flags
For a smart interface the usual code is
len = tty_request_buffer_room(tty, amount_hardware_says);
tty_insert_flip_string(tty, buffer_from_card, len);
More description!
At the moment tty buffers are attached directly to the tty. This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)
I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers. This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.
So far so good. Lots of drivers reference tty->flip.*. Several of them also
call directly and unsafely into function pointers it provides. This will all
break. Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.
At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say
int tty_buffer_request_room(tty, size)
Try and ensure at least size bytes are available, returns actual room (may be
zero). At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative. (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space. The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.
int tty_insert_flip_char(tty, ch, flag)
As before insert a character if there is room. Now returns 1 for success, 0
for failure.
int tty_insert_flip_string(tty, str, len)
Insert a block of non error characters. Returns the number inserted.
int tty_prepare_flip_string(tty, strptr, len)
Adjust the buffer to allow len characters to be added. Returns a buffer
pointer in strptr and the length available. This allows for hardware that
needs to use functions like insl or mencpy_fromio.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:54:13 +00:00
|
|
|
if (unlikely(tty_buffer_request_room(tty, bytes_in) < bytes_in)) {
|
2005-04-16 22:20:36 +00:00
|
|
|
if (tty->low_latency)
|
|
|
|
tty_flip_buffer_push(tty);
|
|
|
|
/*
|
[PATCH] TTY layer buffering revamp
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.
This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.
When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.
For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).
Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.
The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.
I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.
Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real. That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.
Description:
tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification]. It
does now also return the number of chars inserted
There are also
tty_buffer_request_room(tty, len)
which asks for a buffer block of the length requested and returns the space
found. This improves efficiency with hardware that knows how much to
transfer.
and tty_insert_flip_string_flags(tty, str, flags, len)
to insert a string of characters and flags
For a smart interface the usual code is
len = tty_request_buffer_room(tty, amount_hardware_says);
tty_insert_flip_string(tty, buffer_from_card, len);
More description!
At the moment tty buffers are attached directly to the tty. This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)
I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers. This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.
So far so good. Lots of drivers reference tty->flip.*. Several of them also
call directly and unsafely into function pointers it provides. This will all
break. Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.
At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say
int tty_buffer_request_room(tty, size)
Try and ensure at least size bytes are available, returns actual room (may be
zero). At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative. (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space. The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.
int tty_insert_flip_char(tty, ch, flag)
As before insert a character if there is room. Now returns 1 for success, 0
for failure.
int tty_insert_flip_string(tty, str, len)
Insert a block of non error characters. Returns the number inserted.
int tty_prepare_flip_string(tty, strptr, len)
Adjust the buffer to allow len characters to be added. Returns a buffer
pointer in strptr and the length available. This allows for hardware that
needs to use functions like insl or mencpy_fromio.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:54:13 +00:00
|
|
|
* If this failed then we will throw away the bytes
|
|
|
|
* but must do so to clear interrupts.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
}
|
|
|
|
|
|
|
|
bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
|
|
|
|
dma_cache_sync((void *) bp, MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
invalidate_dcache_range((ulong)bp,
|
|
|
|
(ulong)bp + MPSC_RXBE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Other than for parity error, the manual provides little
|
|
|
|
* info on what data will be in a frame flagged by any of
|
|
|
|
* these errors. For parity error, it is the last byte in
|
|
|
|
* the buffer that had the error. As for the rest, I guess
|
|
|
|
* we'll assume there is no data in the buffer.
|
|
|
|
* If there is...it gets lost.
|
|
|
|
*/
|
|
|
|
if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
|
|
|
|
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) {
|
|
|
|
|
|
|
|
pi->port.icount.rx++;
|
|
|
|
|
|
|
|
if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */
|
|
|
|
pi->port.icount.brk++;
|
|
|
|
|
|
|
|
if (uart_handle_break(&pi->port))
|
|
|
|
goto next_frame;
|
|
|
|
}
|
|
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)/* Framing */
|
|
|
|
pi->port.icount.frame++;
|
|
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_OR) /* Overrun */
|
|
|
|
pi->port.icount.overrun++;
|
|
|
|
|
|
|
|
cmdstat &= pi->port.read_status_mask;
|
|
|
|
|
|
|
|
if (cmdstat & SDMA_DESC_CMDSTAT_BR)
|
|
|
|
flag = TTY_BREAK;
|
|
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
|
|
|
|
flag = TTY_FRAME;
|
|
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
|
|
|
|
flag = TTY_OVERRUN;
|
|
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
|
|
|
|
flag = TTY_PARITY;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (uart_handle_sysrq_char(&pi->port, *bp, regs)) {
|
|
|
|
bp++;
|
|
|
|
bytes_in--;
|
|
|
|
goto next_frame;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
|
|
|
|
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
|
|
|
|
!(cmdstat & pi->port.ignore_status_mask))
|
|
|
|
|
|
|
|
tty_insert_flip_char(tty, *bp, flag);
|
|
|
|
else {
|
|
|
|
for (i=0; i<bytes_in; i++)
|
|
|
|
tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
|
|
|
|
|
|
|
|
pi->port.icount.rx += bytes_in;
|
|
|
|
}
|
|
|
|
|
|
|
|
next_frame:
|
|
|
|
rxre->bytecnt = cpu_to_be16(0);
|
|
|
|
wmb();
|
|
|
|
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
|
|
|
|
SDMA_DESC_CMDSTAT_EI |
|
|
|
|
SDMA_DESC_CMDSTAT_F |
|
|
|
|
SDMA_DESC_CMDSTAT_L);
|
|
|
|
wmb();
|
|
|
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
flush_dcache_range((ulong)rxre,
|
|
|
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Advance to next descriptor */
|
|
|
|
pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
|
|
|
|
rxre = (struct mpsc_rx_desc *)(pi->rxr +
|
|
|
|
(pi->rxr_posn * MPSC_RXRE_SIZE));
|
|
|
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
invalidate_dcache_range((ulong)rxre,
|
|
|
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
rc = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Restart rx engine, if its stopped */
|
|
|
|
if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
|
|
|
|
mpsc_start_rx(pi);
|
|
|
|
|
|
|
|
tty_flip_buffer_push(tty);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
|
|
|
|
{
|
|
|
|
struct mpsc_tx_desc *txre;
|
|
|
|
|
|
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
|
|
(pi->txr_head * MPSC_TXRE_SIZE));
|
|
|
|
|
|
|
|
txre->bytecnt = cpu_to_be16(count);
|
|
|
|
txre->shadow = txre->bytecnt;
|
|
|
|
wmb(); /* ensure cmdstat is last field updated */
|
|
|
|
txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F |
|
|
|
|
SDMA_DESC_CMDSTAT_L | ((intr) ?
|
|
|
|
SDMA_DESC_CMDSTAT_EI
|
|
|
|
: 0));
|
|
|
|
wmb();
|
|
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_BIDIRECTIONAL);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
flush_dcache_range((ulong)txre,
|
|
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
mpsc_copy_tx_data(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
struct circ_buf *xmit = &pi->port.info->xmit;
|
|
|
|
u8 *bp;
|
|
|
|
u32 i;
|
|
|
|
|
|
|
|
/* Make sure the desc ring isn't full */
|
|
|
|
while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) <
|
|
|
|
(MPSC_TXR_ENTRIES - 1)) {
|
|
|
|
if (pi->port.x_char) {
|
|
|
|
/*
|
|
|
|
* Ideally, we should use the TCS field in
|
|
|
|
* CHR_1 to put the x_char out immediately but
|
|
|
|
* errata prevents us from being able to read
|
|
|
|
* CHR_2 to know that its safe to write to
|
|
|
|
* CHR_1. Instead, just put it in-band with
|
|
|
|
* all the other Tx data.
|
|
|
|
*/
|
|
|
|
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
|
|
|
*bp = pi->port.x_char;
|
|
|
|
pi->port.x_char = 0;
|
|
|
|
i = 1;
|
|
|
|
}
|
|
|
|
else if (!uart_circ_empty(xmit) && !uart_tx_stopped(&pi->port)){
|
|
|
|
i = min((u32) MPSC_TXBE_SIZE,
|
|
|
|
(u32) uart_circ_chars_pending(xmit));
|
|
|
|
i = min(i, (u32) CIRC_CNT_TO_END(xmit->head, xmit->tail,
|
|
|
|
UART_XMIT_SIZE));
|
|
|
|
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
|
|
|
memcpy(bp, &xmit->buf[xmit->tail], i);
|
|
|
|
xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
|
|
|
|
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
|
|
uart_write_wakeup(&pi->port);
|
|
|
|
}
|
|
|
|
else /* All tx data copied into ring bufs */
|
|
|
|
return;
|
|
|
|
|
|
|
|
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
flush_dcache_range((ulong)bp,
|
|
|
|
(ulong)bp + MPSC_TXBE_SIZE);
|
|
|
|
#endif
|
|
|
|
mpsc_setup_tx_desc(pi, i, 1);
|
|
|
|
|
|
|
|
/* Advance to next descriptor */
|
|
|
|
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
mpsc_tx_intr(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
struct mpsc_tx_desc *txre;
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
if (!mpsc_sdma_tx_active(pi)) {
|
|
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
|
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
|
|
|
|
|
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
invalidate_dcache_range((ulong)txre,
|
|
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
|
|
|
|
rc = 1;
|
|
|
|
pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
|
|
|
|
pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
|
|
|
|
|
|
|
|
/* If no more data to tx, fall out of loop */
|
|
|
|
if (pi->txr_head == pi->txr_tail)
|
|
|
|
break;
|
|
|
|
|
|
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
|
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
|
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE,
|
|
|
|
DMA_FROM_DEVICE);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
invalidate_dcache_range((ulong)txre,
|
|
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
mpsc_copy_tx_data(pi);
|
|
|
|
mpsc_sdma_start_tx(pi); /* start next desc if ready */
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This is the driver's interrupt handler. To avoid a race, we first clear
|
|
|
|
* the interrupt, then handle any completed Rx/Tx descriptors. When done
|
|
|
|
* handling those descriptors, we restart the Rx/Tx engines if they're stopped.
|
|
|
|
*/
|
|
|
|
static irqreturn_t
|
|
|
|
mpsc_sdma_intr(int irq, void *dev_id, struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = dev_id;
|
|
|
|
ulong iflags;
|
|
|
|
int rc = IRQ_NONE;
|
|
|
|
|
|
|
|
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
|
|
|
mpsc_sdma_intr_ack(pi);
|
|
|
|
if (mpsc_rx_intr(pi, regs))
|
|
|
|
rc = IRQ_HANDLED;
|
|
|
|
if (mpsc_tx_intr(pi))
|
|
|
|
rc = IRQ_HANDLED;
|
|
|
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
|
|
|
|
|
|
|
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* serial_core.c Interface routines
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
static uint
|
|
|
|
mpsc_tx_empty(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
ulong iflags;
|
|
|
|
uint rc;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
|
|
|
rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
|
|
|
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_set_mctrl(struct uart_port *port, uint mctrl)
|
|
|
|
{
|
|
|
|
/* Have no way to set modem control lines AFAICT */
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint
|
|
|
|
mpsc_get_mctrl(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
u32 mflags, status;
|
|
|
|
|
|
|
|
status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
|
|
|
|
readl(pi->mpsc_base + MPSC_CHR_10);
|
|
|
|
|
|
|
|
mflags = 0;
|
|
|
|
if (status & 0x1)
|
|
|
|
mflags |= TIOCM_CTS;
|
|
|
|
if (status & 0x2)
|
|
|
|
mflags |= TIOCM_CAR;
|
|
|
|
|
|
|
|
return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2005-08-31 09:12:14 +00:00
|
|
|
mpsc_stop_tx(struct uart_port *port)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
|
2005-08-31 09:12:14 +00:00
|
|
|
pr_debug("mpsc_stop_tx[%d]\n", port->line);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
mpsc_freeze(pi);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2005-08-31 09:12:14 +00:00
|
|
|
mpsc_start_tx(struct uart_port *port)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
|
|
|
|
mpsc_unfreeze(pi);
|
|
|
|
mpsc_copy_tx_data(pi);
|
|
|
|
mpsc_sdma_start_tx(pi);
|
|
|
|
|
2005-08-31 09:12:14 +00:00
|
|
|
pr_debug("mpsc_start_tx[%d]\n", port->line);
|
2005-04-16 22:20:36 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_start_rx(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
|
|
|
|
|
2005-10-30 23:02:53 +00:00
|
|
|
/* Issue a Receive Abort to clear any receive errors */
|
|
|
|
writel(MPSC_CHR_2_RA, pi->mpsc_base + MPSC_CHR_2);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (pi->rcv_data) {
|
|
|
|
mpsc_enter_hunt(pi);
|
|
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_stop_rx(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
|
|
|
|
pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
|
|
|
|
|
|
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_enable_ms(struct uart_port *port)
|
|
|
|
{
|
|
|
|
return; /* Not supported */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_break_ctl(struct uart_port *port, int ctl)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
ulong flags;
|
|
|
|
u32 v;
|
|
|
|
|
|
|
|
v = ctl ? 0x00ff0000 : 0;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pi->port.lock, flags);
|
|
|
|
if (pi->mirror_regs)
|
|
|
|
pi->MPSC_CHR_1_m = v;
|
|
|
|
writel(v, pi->mpsc_base + MPSC_CHR_1);
|
|
|
|
spin_unlock_irqrestore(&pi->port.lock, flags);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_startup(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
u32 flag = 0;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
|
|
|
|
port->line, pi->port.irq);
|
|
|
|
|
|
|
|
if ((rc = mpsc_make_ready(pi)) == 0) {
|
|
|
|
/* Setup IRQ handler */
|
|
|
|
mpsc_sdma_intr_ack(pi);
|
|
|
|
|
|
|
|
/* If irq's are shared, need to set flag */
|
|
|
|
if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
|
2006-07-02 02:29:43 +00:00
|
|
|
flag = IRQF_SHARED;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
|
2006-03-25 11:08:26 +00:00
|
|
|
"mpsc-sdma", pi))
|
2005-04-16 22:20:36 +00:00
|
|
|
printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
|
|
|
|
pi->port.irq);
|
|
|
|
|
|
|
|
mpsc_sdma_intr_unmask(pi, 0xf);
|
|
|
|
mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p +
|
|
|
|
(pi->rxr_posn * MPSC_RXRE_SIZE)));
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_shutdown(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
|
|
|
|
pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
|
|
|
|
|
|
|
|
mpsc_sdma_stop(pi);
|
|
|
|
free_irq(pi->port.irq, pi);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_set_termios(struct uart_port *port, struct termios *termios,
|
|
|
|
struct termios *old)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
u32 baud;
|
|
|
|
ulong flags;
|
|
|
|
u32 chr_bits, stop_bits, par;
|
|
|
|
|
|
|
|
pi->c_iflag = termios->c_iflag;
|
|
|
|
pi->c_cflag = termios->c_cflag;
|
|
|
|
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
|
|
case CS5:
|
|
|
|
chr_bits = MPSC_MPCR_CL_5;
|
|
|
|
break;
|
|
|
|
case CS6:
|
|
|
|
chr_bits = MPSC_MPCR_CL_6;
|
|
|
|
break;
|
|
|
|
case CS7:
|
|
|
|
chr_bits = MPSC_MPCR_CL_7;
|
|
|
|
break;
|
|
|
|
case CS8:
|
|
|
|
default:
|
|
|
|
chr_bits = MPSC_MPCR_CL_8;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
|
|
stop_bits = MPSC_MPCR_SBL_2;
|
|
|
|
else
|
|
|
|
stop_bits = MPSC_MPCR_SBL_1;
|
|
|
|
|
|
|
|
par = MPSC_CHR_2_PAR_EVEN;
|
|
|
|
if (termios->c_cflag & PARENB)
|
|
|
|
if (termios->c_cflag & PARODD)
|
|
|
|
par = MPSC_CHR_2_PAR_ODD;
|
|
|
|
#ifdef CMSPAR
|
|
|
|
if (termios->c_cflag & CMSPAR) {
|
|
|
|
if (termios->c_cflag & PARODD)
|
|
|
|
par = MPSC_CHR_2_PAR_MARK;
|
|
|
|
else
|
|
|
|
par = MPSC_CHR_2_PAR_SPACE;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pi->port.lock, flags);
|
|
|
|
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
|
|
|
|
mpsc_set_char_length(pi, chr_bits);
|
|
|
|
mpsc_set_stop_bit_length(pi, stop_bits);
|
|
|
|
mpsc_set_parity(pi, par);
|
|
|
|
mpsc_set_baudrate(pi, baud);
|
|
|
|
|
|
|
|
/* Characters/events to read */
|
|
|
|
pi->rcv_data = 1;
|
|
|
|
pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
|
|
|
|
|
|
|
|
if (termios->c_iflag & INPCK)
|
|
|
|
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE |
|
|
|
|
SDMA_DESC_CMDSTAT_FR;
|
|
|
|
|
|
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
|
|
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
|
|
|
|
|
|
|
|
/* Characters/events to ignore */
|
|
|
|
pi->port.ignore_status_mask = 0;
|
|
|
|
|
|
|
|
if (termios->c_iflag & IGNPAR)
|
|
|
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE |
|
|
|
|
SDMA_DESC_CMDSTAT_FR;
|
|
|
|
|
|
|
|
if (termios->c_iflag & IGNBRK) {
|
|
|
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
|
|
|
|
|
|
|
|
if (termios->c_iflag & IGNPAR)
|
|
|
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Ignore all chars if CREAD not set */
|
|
|
|
if (!(termios->c_cflag & CREAD))
|
|
|
|
pi->rcv_data = 0;
|
|
|
|
else
|
|
|
|
mpsc_start_rx(pi);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pi->port.lock, flags);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const char *
|
|
|
|
mpsc_type(struct uart_port *port)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
|
|
|
|
return MPSC_DRIVER_NAME;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_request_port(struct uart_port *port)
|
|
|
|
{
|
|
|
|
/* Should make chip/platform specific call */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_release_port(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
|
|
|
|
if (pi->ready) {
|
|
|
|
mpsc_uninit_rings(pi);
|
|
|
|
mpsc_free_ring_mem(pi);
|
|
|
|
pi->ready = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_config_port(struct uart_port *port, int flags)
|
|
|
|
{
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
|
|
|
|
|
|
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
|
|
|
|
rc = -EINVAL;
|
|
|
|
else if (pi->port.irq != ser->irq)
|
|
|
|
rc = -EINVAL;
|
|
|
|
else if (ser->io_type != SERIAL_IO_MEM)
|
|
|
|
rc = -EINVAL;
|
|
|
|
else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
|
|
|
|
rc = -EINVAL;
|
|
|
|
else if ((void *)pi->port.mapbase != ser->iomem_base)
|
|
|
|
rc = -EINVAL;
|
|
|
|
else if (pi->port.iobase != ser->port)
|
|
|
|
rc = -EINVAL;
|
|
|
|
else if (ser->hub6 != 0)
|
|
|
|
rc = -EINVAL;
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct uart_ops mpsc_pops = {
|
|
|
|
.tx_empty = mpsc_tx_empty,
|
|
|
|
.set_mctrl = mpsc_set_mctrl,
|
|
|
|
.get_mctrl = mpsc_get_mctrl,
|
|
|
|
.stop_tx = mpsc_stop_tx,
|
|
|
|
.start_tx = mpsc_start_tx,
|
|
|
|
.stop_rx = mpsc_stop_rx,
|
|
|
|
.enable_ms = mpsc_enable_ms,
|
|
|
|
.break_ctl = mpsc_break_ctl,
|
|
|
|
.startup = mpsc_startup,
|
|
|
|
.shutdown = mpsc_shutdown,
|
|
|
|
.set_termios = mpsc_set_termios,
|
|
|
|
.type = mpsc_type,
|
|
|
|
.release_port = mpsc_release_port,
|
|
|
|
.request_port = mpsc_request_port,
|
|
|
|
.config_port = mpsc_config_port,
|
|
|
|
.verify_port = mpsc_verify_port,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Console Interface Routines
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifdef CONFIG_SERIAL_MPSC_CONSOLE
|
|
|
|
static void
|
|
|
|
mpsc_console_write(struct console *co, const char *s, uint count)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi = &mpsc_ports[co->index];
|
|
|
|
u8 *bp, *dp, add_cr = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
while (mpsc_sdma_tx_active(pi))
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
while (count > 0) {
|
|
|
|
bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
|
|
|
|
|
|
|
for (i = 0; i < MPSC_TXBE_SIZE; i++) {
|
|
|
|
if (count == 0)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (add_cr) {
|
|
|
|
*(dp++) = '\r';
|
|
|
|
add_cr = 0;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
*(dp++) = *s;
|
|
|
|
|
|
|
|
if (*(s++) == '\n') { /* add '\r' after '\n' */
|
|
|
|
add_cr = 1;
|
|
|
|
count++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
count--;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
|
|
flush_dcache_range((ulong)bp,
|
|
|
|
(ulong)bp + MPSC_TXBE_SIZE);
|
|
|
|
#endif
|
|
|
|
mpsc_setup_tx_desc(pi, i, 0);
|
|
|
|
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
|
|
|
|
mpsc_sdma_start_tx(pi);
|
|
|
|
|
|
|
|
while (mpsc_sdma_tx_active(pi))
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init
|
|
|
|
mpsc_console_setup(struct console *co, char *options)
|
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi;
|
|
|
|
int baud, bits, parity, flow;
|
|
|
|
|
|
|
|
pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
|
|
|
|
|
|
|
|
if (co->index >= MPSC_NUM_CTLRS)
|
|
|
|
co->index = 0;
|
|
|
|
|
|
|
|
pi = &mpsc_ports[co->index];
|
|
|
|
|
|
|
|
baud = pi->default_baud;
|
|
|
|
bits = pi->default_bits;
|
|
|
|
parity = pi->default_parity;
|
|
|
|
flow = pi->default_flow;
|
|
|
|
|
|
|
|
if (!pi->port.ops)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */
|
|
|
|
|
|
|
|
if (options)
|
|
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
|
|
|
|
return uart_set_options(&pi->port, co, baud, parity, bits, flow);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct console mpsc_console = {
|
|
|
|
.name = MPSC_DEV_NAME,
|
|
|
|
.write = mpsc_console_write,
|
|
|
|
.device = uart_console_device,
|
|
|
|
.setup = mpsc_console_setup,
|
|
|
|
.flags = CON_PRINTBUFFER,
|
|
|
|
.index = -1,
|
|
|
|
.data = &mpsc_reg,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init
|
|
|
|
mpsc_late_console_init(void)
|
|
|
|
{
|
|
|
|
pr_debug("mpsc_late_console_init: Enter\n");
|
|
|
|
|
|
|
|
if (!(mpsc_console.flags & CON_ENABLED))
|
|
|
|
register_console(&mpsc_console);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
late_initcall(mpsc_late_console_init);
|
|
|
|
|
|
|
|
#define MPSC_CONSOLE &mpsc_console
|
|
|
|
#else
|
|
|
|
#define MPSC_CONSOLE NULL
|
|
|
|
#endif
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Dummy Platform Driver to extract & map shared register regions
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mpsc_resource_err(char *s)
|
|
|
|
{
|
|
|
|
printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_shared_map_regs(struct platform_device *pd)
|
|
|
|
{
|
|
|
|
struct resource *r;
|
|
|
|
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
|
|
|
MPSC_ROUTING_BASE_ORDER)) && request_mem_region(r->start,
|
|
|
|
MPSC_ROUTING_REG_BLOCK_SIZE, "mpsc_routing_regs")) {
|
|
|
|
|
|
|
|
mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
|
|
|
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
|
|
|
mpsc_shared_regs.mpsc_routing_base_p = r->start;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
mpsc_resource_err("MPSC routing base");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
|
|
|
MPSC_SDMA_INTR_BASE_ORDER)) && request_mem_region(r->start,
|
|
|
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE, "sdma_intr_regs")) {
|
|
|
|
|
|
|
|
mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
|
|
|
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
|
|
|
|
mpsc_shared_regs.sdma_intr_base_p = r->start;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
iounmap(mpsc_shared_regs.mpsc_routing_base);
|
|
|
|
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
|
|
|
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
|
|
|
mpsc_resource_err("SDMA intr base");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_shared_unmap_regs(void)
|
|
|
|
{
|
|
|
|
if (!mpsc_shared_regs.mpsc_routing_base) {
|
|
|
|
iounmap(mpsc_shared_regs.mpsc_routing_base);
|
|
|
|
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
|
|
|
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
|
|
|
}
|
|
|
|
if (!mpsc_shared_regs.sdma_intr_base) {
|
|
|
|
iounmap(mpsc_shared_regs.sdma_intr_base);
|
|
|
|
release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
|
|
|
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
|
|
|
|
}
|
|
|
|
|
2005-04-26 01:32:12 +00:00
|
|
|
mpsc_shared_regs.mpsc_routing_base = NULL;
|
|
|
|
mpsc_shared_regs.sdma_intr_base = NULL;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
mpsc_shared_regs.mpsc_routing_base_p = 0;
|
|
|
|
mpsc_shared_regs.sdma_intr_base_p = 0;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-11-09 22:32:44 +00:00
|
|
|
mpsc_shared_drv_probe(struct platform_device *dev)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct mpsc_shared_pdata *pdata;
|
|
|
|
int rc = -ENODEV;
|
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
if (dev->id == 0) {
|
|
|
|
if (!(rc = mpsc_shared_map_regs(dev))) {
|
|
|
|
pdata = (struct mpsc_shared_pdata *)dev->dev.platform_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
|
|
|
|
mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
|
|
|
|
mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
|
|
|
|
mpsc_shared_regs.SDMA_INTR_CAUSE_m =
|
|
|
|
pdata->intr_cause_val;
|
|
|
|
mpsc_shared_regs.SDMA_INTR_MASK_m =
|
|
|
|
pdata->intr_mask_val;
|
|
|
|
|
|
|
|
rc = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-11-09 22:32:44 +00:00
|
|
|
mpsc_shared_drv_remove(struct platform_device *dev)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int rc = -ENODEV;
|
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
if (dev->id == 0) {
|
2005-04-16 22:20:36 +00:00
|
|
|
mpsc_shared_unmap_regs();
|
|
|
|
mpsc_shared_regs.MPSC_MRR_m = 0;
|
|
|
|
mpsc_shared_regs.MPSC_RCRR_m = 0;
|
|
|
|
mpsc_shared_regs.MPSC_TCRR_m = 0;
|
|
|
|
mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
|
|
|
|
mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
|
|
|
|
rc = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
static struct platform_driver mpsc_shared_driver = {
|
2005-04-16 22:20:36 +00:00
|
|
|
.probe = mpsc_shared_drv_probe,
|
|
|
|
.remove = mpsc_shared_drv_remove,
|
2005-11-09 22:32:44 +00:00
|
|
|
.driver = {
|
|
|
|
.name = MPSC_SHARED_NAME,
|
|
|
|
},
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
******************************************************************************
|
|
|
|
*
|
|
|
|
* Driver Interface Routines
|
|
|
|
*
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
static struct uart_driver mpsc_reg = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.driver_name = MPSC_DRIVER_NAME,
|
|
|
|
.dev_name = MPSC_DEV_NAME,
|
|
|
|
.major = MPSC_MAJOR,
|
|
|
|
.minor = MPSC_MINOR_START,
|
|
|
|
.nr = MPSC_NUM_CTLRS,
|
|
|
|
.cons = MPSC_CONSOLE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
mpsc_drv_map_regs(struct mpsc_port_info *pi, struct platform_device *pd)
|
|
|
|
{
|
|
|
|
struct resource *r;
|
|
|
|
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) &&
|
|
|
|
request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, "mpsc_regs")){
|
|
|
|
|
|
|
|
pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
|
|
|
|
pi->mpsc_base_p = r->start;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
mpsc_resource_err("MPSC base");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
|
|
|
MPSC_SDMA_BASE_ORDER)) && request_mem_region(r->start,
|
|
|
|
MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
|
|
|
|
|
|
|
|
pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
|
|
|
|
pi->sdma_base_p = r->start;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
mpsc_resource_err("SDMA base");
|
2006-10-01 06:29:24 +00:00
|
|
|
if (pi->mpsc_base) {
|
|
|
|
iounmap(pi->mpsc_base);
|
|
|
|
pi->mpsc_base = NULL;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
|
|
|
|
&& request_mem_region(r->start, MPSC_BRG_REG_BLOCK_SIZE,
|
|
|
|
"brg_regs")) {
|
|
|
|
|
|
|
|
pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
|
|
|
|
pi->brg_base_p = r->start;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
mpsc_resource_err("BRG base");
|
2006-10-01 06:29:24 +00:00
|
|
|
if (pi->mpsc_base) {
|
|
|
|
iounmap(pi->mpsc_base);
|
|
|
|
pi->mpsc_base = NULL;
|
|
|
|
}
|
|
|
|
if (pi->sdma_base) {
|
|
|
|
iounmap(pi->sdma_base);
|
|
|
|
pi->sdma_base = NULL;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
|
|
|
|
{
|
|
|
|
if (!pi->mpsc_base) {
|
|
|
|
iounmap(pi->mpsc_base);
|
|
|
|
release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
|
|
|
|
}
|
|
|
|
if (!pi->sdma_base) {
|
|
|
|
iounmap(pi->sdma_base);
|
|
|
|
release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
|
|
|
|
}
|
|
|
|
if (!pi->brg_base) {
|
|
|
|
iounmap(pi->brg_base);
|
|
|
|
release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
|
|
|
|
}
|
|
|
|
|
2005-04-26 01:32:12 +00:00
|
|
|
pi->mpsc_base = NULL;
|
|
|
|
pi->sdma_base = NULL;
|
|
|
|
pi->brg_base = NULL;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
pi->mpsc_base_p = 0;
|
|
|
|
pi->sdma_base_p = 0;
|
|
|
|
pi->brg_base_p = 0;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
|
|
|
|
struct platform_device *pd, int num)
|
|
|
|
{
|
|
|
|
struct mpsc_pdata *pdata;
|
|
|
|
|
|
|
|
pdata = (struct mpsc_pdata *)pd->dev.platform_data;
|
|
|
|
|
|
|
|
pi->port.uartclk = pdata->brg_clk_freq;
|
|
|
|
pi->port.iotype = UPIO_MEM;
|
|
|
|
pi->port.line = num;
|
|
|
|
pi->port.type = PORT_MPSC;
|
|
|
|
pi->port.fifosize = MPSC_TXBE_SIZE;
|
|
|
|
pi->port.membase = pi->mpsc_base;
|
|
|
|
pi->port.mapbase = (ulong)pi->mpsc_base;
|
|
|
|
pi->port.ops = &mpsc_pops;
|
|
|
|
|
|
|
|
pi->mirror_regs = pdata->mirror_regs;
|
|
|
|
pi->cache_mgmt = pdata->cache_mgmt;
|
|
|
|
pi->brg_can_tune = pdata->brg_can_tune;
|
|
|
|
pi->brg_clk_src = pdata->brg_clk_src;
|
|
|
|
pi->mpsc_max_idle = pdata->max_idle;
|
|
|
|
pi->default_baud = pdata->default_baud;
|
|
|
|
pi->default_bits = pdata->default_bits;
|
|
|
|
pi->default_parity = pdata->default_parity;
|
|
|
|
pi->default_flow = pdata->default_flow;
|
|
|
|
|
|
|
|
/* Initial values of mirrored regs */
|
|
|
|
pi->MPSC_CHR_1_m = pdata->chr_1_val;
|
|
|
|
pi->MPSC_CHR_2_m = pdata->chr_2_val;
|
|
|
|
pi->MPSC_CHR_10_m = pdata->chr_10_val;
|
|
|
|
pi->MPSC_MPCR_m = pdata->mpcr_val;
|
|
|
|
pi->BRG_BCR_m = pdata->bcr_val;
|
|
|
|
|
|
|
|
pi->shared_regs = &mpsc_shared_regs;
|
|
|
|
|
|
|
|
pi->port.irq = platform_get_irq(pd, 0);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-11-09 22:32:44 +00:00
|
|
|
mpsc_drv_probe(struct platform_device *dev)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct mpsc_port_info *pi;
|
|
|
|
int rc = -ENODEV;
|
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
if (dev->id < MPSC_NUM_CTLRS) {
|
|
|
|
pi = &mpsc_ports[dev->id];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
if (!(rc = mpsc_drv_map_regs(pi, dev))) {
|
|
|
|
mpsc_drv_get_platform_data(pi, dev, dev->id);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!(rc = mpsc_make_ready(pi)))
|
|
|
|
if (!(rc = uart_add_one_port(&mpsc_reg,
|
|
|
|
&pi->port)))
|
|
|
|
rc = 0;
|
|
|
|
else {
|
|
|
|
mpsc_release_port(
|
|
|
|
(struct uart_port *)pi);
|
|
|
|
mpsc_drv_unmap_regs(pi);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
mpsc_drv_unmap_regs(pi);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-11-09 22:32:44 +00:00
|
|
|
mpsc_drv_remove(struct platform_device *dev)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-11-09 22:32:44 +00:00
|
|
|
pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
if (dev->id < MPSC_NUM_CTLRS) {
|
|
|
|
uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port);
|
|
|
|
mpsc_release_port((struct uart_port *)&mpsc_ports[dev->id].port);
|
|
|
|
mpsc_drv_unmap_regs(&mpsc_ports[dev->id]);
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2005-11-09 22:32:44 +00:00
|
|
|
static struct platform_driver mpsc_driver = {
|
2005-04-16 22:20:36 +00:00
|
|
|
.probe = mpsc_drv_probe,
|
|
|
|
.remove = mpsc_drv_remove,
|
2005-11-09 22:32:44 +00:00
|
|
|
.driver = {
|
|
|
|
.name = MPSC_CTLR_NAME,
|
|
|
|
},
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __init
|
|
|
|
mpsc_drv_init(void)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
|
|
|
|
|
|
|
|
memset(mpsc_ports, 0, sizeof(mpsc_ports));
|
|
|
|
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
|
|
|
|
|
|
|
|
if (!(rc = uart_register_driver(&mpsc_reg))) {
|
2005-11-09 22:32:44 +00:00
|
|
|
if (!(rc = platform_driver_register(&mpsc_shared_driver))) {
|
|
|
|
if ((rc = platform_driver_register(&mpsc_driver))) {
|
|
|
|
platform_driver_unregister(&mpsc_shared_driver);
|
2005-04-16 22:20:36 +00:00
|
|
|
uart_unregister_driver(&mpsc_reg);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
uart_unregister_driver(&mpsc_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit
|
|
|
|
mpsc_drv_exit(void)
|
|
|
|
{
|
2005-11-09 22:32:44 +00:00
|
|
|
platform_driver_unregister(&mpsc_driver);
|
|
|
|
platform_driver_unregister(&mpsc_shared_driver);
|
2005-04-16 22:20:36 +00:00
|
|
|
uart_unregister_driver(&mpsc_reg);
|
|
|
|
memset(mpsc_ports, 0, sizeof(mpsc_ports));
|
|
|
|
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(mpsc_drv_init);
|
|
|
|
module_exit(mpsc_drv_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
|
|
|
|
MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
|
|
|
|
MODULE_VERSION(MPSC_VERSION);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
|