davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d5b0b5d628
kernel-ark/arch/ppc/kernel/ppc_ksyms.c

263 lines
6.6 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/elfcore.h>
#include <linux/string.h>
#include <linux/interrupt.h>
[PATCH] tty: Remove include of screen_info.h from tty.h screen_info.h doesn't have anything to do with the tty layer and shouldn't be included by tty.h. This patches removes the include and modifies all users to directly include screen_info.h. struct screen_info is mainly used to communicate with the console drivers in drivers/video/console. Note that this patch touches every arch and I have no way of testing it. If there is a mistake the worst thing that will happen is a compile error. [akpm@osdl.org: fix arm build] [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:13 +00:00
#include <linux/screen_info.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/vt_kern.h>
#include <linux/nvram.h>
#include <linux/console.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/pm.h>
#include <linux/bitops.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/ide.h>
#include <asm/atomic.h>
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/hw_irq.h>
#include <asm/nvram.h>
#include <asm/mmu_context.h>
#include <asm/backlight.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/btext.h>
#include <asm/xmon.h>
[PATCH] powerpc: Merge signal.h Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09 00:21:07 +00:00
#include <asm/signal.h>
[POWERPC] Compile fixes for arch/powerpc dcr code The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-06 00:48:28 +00:00
#include <asm/dcr.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_8xx
[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-25 14:31:42 +00:00
#include <asm/cpm1.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
extern void transfer_to_handler(void);
extern void do_IRQ(struct pt_regs *regs);
powerpc: merge idle_power4.S and trapc.s Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 08:43:42 +00:00
extern void machine_check_exception(struct pt_regs *regs);
extern void alignment_exception(struct pt_regs *regs);
extern void program_check_exception(struct pt_regs *regs);
extern void single_step_exception(struct pt_regs *regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int sys_sigreturn(struct pt_regs *regs);
long long __ashrdi3(long long, int);
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
powerpc: merge idle_power4.S and trapc.s Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 08:43:42 +00:00
EXPORT_SYMBOL(machine_check_exception);
EXPORT_SYMBOL(alignment_exception);
EXPORT_SYMBOL(program_check_exception);
EXPORT_SYMBOL(single_step_exception);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(sys_sigreturn);
EXPORT_SYMBOL(ppc_n_lost_interrupts);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
#if !defined(__INLINE_BITOPS)
EXPORT_SYMBOL(set_bit);
EXPORT_SYMBOL(clear_bit);
EXPORT_SYMBOL(change_bit);
EXPORT_SYMBOL(test_and_set_bit);
EXPORT_SYMBOL(test_and_clear_bit);
EXPORT_SYMBOL(test_and_change_bit);
#endif /* __INLINE_BITOPS */
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(ip_fast_csum);
EXPORT_SYMBOL(csum_tcpudp_magic);
EXPORT_SYMBOL(__copy_tofrom_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
/*
EXPORT_SYMBOL(inb);
EXPORT_SYMBOL(inw);
EXPORT_SYMBOL(inl);
EXPORT_SYMBOL(outb);
EXPORT_SYMBOL(outw);
EXPORT_SYMBOL(outl);
EXPORT_SYMBOL(outsl);*/
EXPORT_SYMBOL(_insb);
EXPORT_SYMBOL(_outsb);
EXPORT_SYMBOL(_insw_ns);
EXPORT_SYMBOL(_outsw_ns);
EXPORT_SYMBOL(_insl_ns);
EXPORT_SYMBOL(_outsl_ns);
EXPORT_SYMBOL(iopa);
EXPORT_SYMBOL(ioremap);
#ifdef CONFIG_44x
EXPORT_SYMBOL(ioremap64);
#endif
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
EXPORT_SYMBOL(ppc_ide_md);
#endif
#ifdef CONFIG_PCI
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
EXPORT_SYMBOL(pci_dram_offset);
EXPORT_SYMBOL(pci_alloc_consistent);
EXPORT_SYMBOL(pci_free_consistent);
EXPORT_SYMBOL(pci_bus_io_base);
EXPORT_SYMBOL(pci_bus_io_base_phys);
EXPORT_SYMBOL(pci_bus_mem_base_phys);
EXPORT_SYMBOL(pci_bus_to_hose);
EXPORT_SYMBOL(pci_resource_to_bus);
EXPORT_SYMBOL(pci_phys_to_bus);
EXPORT_SYMBOL(pci_bus_to_phys);
#endif /* CONFIG_PCI */
#ifdef CONFIG_NOT_COHERENT_CACHE
[PATCH] powerpc: Merge cacheflush.h and cache.h The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 00:50:16 +00:00
extern void flush_dcache_all(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(flush_dcache_all);
#endif
EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(flush_instruction_cache);
EXPORT_SYMBOL(giveup_fpu);
[PATCH] ppc: Export symbol needed by MOL Export symbol needed to allow MOL to run. This was changed to be inline in past and forgot to be change here. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-28 21:02:24 +00:00
EXPORT_SYMBOL(__flush_icache_range);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(flush_dcache_range);
EXPORT_SYMBOL(flush_icache_user_range);
EXPORT_SYMBOL(flush_dcache_page);
EXPORT_SYMBOL(flush_tlb_kernel_range);
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(_tlbie);
#ifdef CONFIG_ALTIVEC
[PATCH] ppc: last_task_.... is defined only on non-SMP ... so it should be exported only on non-SMP. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-01-19 03:34:20 +00:00
#ifndef CONFIG_SMP
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(last_task_used_altivec);
[PATCH] ppc: last_task_.... is defined only on non-SMP ... so it should be exported only on non-SMP. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-01-19 03:34:20 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(giveup_altivec);
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SMP
EXPORT_SYMBOL(smp_call_function);
EXPORT_SYMBOL(smp_hw_index);
#endif
EXPORT_SYMBOL(ppc_md);
#ifdef CONFIG_ADB
EXPORT_SYMBOL(adb_request);
EXPORT_SYMBOL(adb_register);
EXPORT_SYMBOL(adb_unregister);
EXPORT_SYMBOL(adb_poll);
EXPORT_SYMBOL(adb_try_handler_change);
#endif /* CONFIG_ADB */
#ifdef CONFIG_ADB_CUDA
EXPORT_SYMBOL(cuda_request);
EXPORT_SYMBOL(cuda_poll);
#endif /* CONFIG_ADB_CUDA */
#if defined(CONFIG_BOOTX_TEXT)
EXPORT_SYMBOL(btext_update_display);
#endif
#ifdef CONFIG_VT
EXPORT_SYMBOL(kd_mksound);
#endif
EXPORT_SYMBOL(to_tm);
EXPORT_SYMBOL(pm_power_off);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(memcpy);
[PATCH] ppc32: export cacheable_memcpy() Add declaration and cacheable_memcpy(). I'll be needing this function in new 4xx EMAC driver I'm going to submit to netdev soon. IMHO, the better place for the declaration would be asm-powerpc/string.h, unfortunately, ppc64 doesn't have this function, so asm-ppc/system.h is the next best place. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 22:55:54 +00:00
EXPORT_SYMBOL(cacheable_memcpy);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memchr);
#if defined(CONFIG_FB_VGA16_MODULE)
EXPORT_SYMBOL(screen_info);
#endif
EXPORT_SYMBOL(__delay);
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
EXPORT_SYMBOL(console_drivers);
#ifdef CONFIG_XMON
EXPORT_SYMBOL(xmon);
EXPORT_SYMBOL(xmon_printf);
#endif
#if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
extern void (*debugger)(struct pt_regs *regs);
extern int (*debugger_bpt)(struct pt_regs *regs);
extern int (*debugger_sstep)(struct pt_regs *regs);
extern int (*debugger_iabr_match)(struct pt_regs *regs);
extern int (*debugger_dabr_match)(struct pt_regs *regs);
extern void (*debugger_fault_handler)(struct pt_regs *regs);
EXPORT_SYMBOL(debugger);
EXPORT_SYMBOL(debugger_bpt);
EXPORT_SYMBOL(debugger_sstep);
EXPORT_SYMBOL(debugger_iabr_match);
EXPORT_SYMBOL(debugger_dabr_match);
EXPORT_SYMBOL(debugger_fault_handler);
#endif
#ifdef CONFIG_8xx
EXPORT_SYMBOL(cpm_install_handler);
EXPORT_SYMBOL(cpm_free_handler);
#endif /* CONFIG_8xx */
[PPC] Remove 85xx from arch/ppc 85xx exists in arch/powerpc as well as cuImage support to boot from a u-boot that doesn't support device trees. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27 20:06:14 +00:00
#if defined(CONFIG_8xx) || defined(CONFIG_40x)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(__res);
#endif
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
EXPORT_SYMBOL(disarm_decr);
#ifdef CONFIG_PPC_STD_MMU
extern long mol_trampoline;
EXPORT_SYMBOL(mol_trampoline); /* For MOL */
EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
#ifdef CONFIG_SMP
extern int mmu_hash_lock;
EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
#endif /* CONFIG_SMP */
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
#endif /* CONFIG_PPC_STD_MMU */
[PPC] Fix compile error for e500 core based processors We get the following compiler error: CC arch/ppc/kernel/ppc_ksyms.o arch/ppc/kernel/ppc_ksyms.c:275: error: '__mtdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:275: warning: type defaults to 'int' in declaration of '__mtdcr' arch/ppc/kernel/ppc_ksyms.c:276: error: '__mfdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:276: warning: type defaults to 'int' in declaration of '__mfdcr' make[1]: *** [arch/ppc/kernel/ppc_ksyms.o] Error 1 This is due to the EXPORT_SYMBOL for __mtdcr/__mfdcr not having the proper CONFIG protection Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09 14:10:38 +00:00
#ifdef CONFIG_PPC_DCR_NATIVE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
Reference in New Issue Copy Permalink