kernel-ark/arch/Kconfig

162 lines
4.3 KiB
Plaintext
Raw Normal View History

Create arch/Kconfig Puts the content of arch/Kconfig in the "General setup" menu. Linus: > Should it come with a re-duplication of it's content into each > architecture, which was the case previously ? The oprofile and kprobes > menu entries were litteraly cut and pasted from one architecture to > another. Should we put its content in init/Kconfig then ? I don't think it's a good idea to go back to making it per-architecture, although that extensive "depends on <list-of-archiectures-here>" might indicate that there certainly is room for cleanup there. And I don't think it's wrong keeping it in kernel/Kconfig.xyz per se, I just think it's wrong to (a) lump the code together when it really doesn't necessarily need to and (b) show it to users as some kind of choice that is tied together (whether it then has common code or not). On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Sam Ravnborg: Stuff it into a new file: arch/Kconfig We can then extend this file to include all the 'trailing' Kconfig things that are anyway equal for all ARCHs. But it should be kept clean - so if we introduce such a file then we should use ARCH_HAS_whatever in the arch specific Kconfig files to enable stuff that is not shared. [...] The above suggestion is actually not exactly the best way to do it... First the naming.. A quick grep shows following usage today (in Kconfig files) ARCH_HAS 51 ARCH_SUPPORTS 4 HAVE_ARCH 7 ARCH_HAS is the clear winner. In the common Kconfig file do: config FOO depends on ARCH_HAS_FOO bool "bla bla" config ARCH_HAS_FOO def_bool n In the arch specific Kconfig file in a suitable place do: config SUITABLE_OPTION select ARCH_HAS_FOO The naming of ARCH_HAS_ is fixed and shall be: ARCH_HAS_<config option it will enable> Only a single line added pr. architecture. And we will end up with a (maybe even commented) list of trivial selects. - Yet another update : Moving to HAVE_* now. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-02 20:10:33 +00:00
#
# General architecture dependent options
#
config OPROFILE
tristate "OProfile system profiling"
depends on PROFILING
depends on HAVE_OPROFILE
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
and applications.
If unsure, say N.
config OPROFILE_EVENT_MULTIPLEX
bool "OProfile multiplexing support (EXPERIMENTAL)"
default n
depends on OPROFILE && X86
help
The number of hardware counters is limited. The multiplexing
feature enables OProfile to gather more events than counters
are provided by the hardware. This is realized by switching
between events at an user specified time interval.
If unsure, say N.
config HAVE_OPROFILE
bool
config KPROBES
bool "Kprobes"
depends on KALLSYMS && MODULES
depends on HAVE_KPROBES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:07 +00:00
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:07 +00:00
depends on !PREEMPT
select KALLSYMS_ALL
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
help
Some architectures are unable to perform unaligned accesses
without the use of get_unaligned/put_unaligned. Others are
unable to perform such accesses efficiently (e.g. trap on
unaligned access and require fixing it up in the exception
handler.)
This symbol should be selected by an architecture if it can
perform unaligned accesses efficiently to allow different
code paths to be selected for these cases. Some network
drivers, for example, could opt to not fix up alignment
problems with received packets if doing so would not help
much.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config HAVE_SYSCALL_WRAPPERS
bool
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
config USER_RETURN_NOTIFIER
bool
depends on HAVE_USER_RETURN_NOTIFIER
help
Provide a kernel-internal notification when a cpu is about to
switch to user mode.
config HAVE_IOREMAP_PROT
bool
config HAVE_KPROBES
bool
config HAVE_KRETPROBES
bool
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:07 +00:00
config HAVE_OPTPROBES
bool
#
# An arch should select this if it provides all these things:
#
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit}
# TIF_NOTIFY_RESUME calls tracehook_notify_resume()
# signal delivery calls tracehook_signal_handler()
#
config HAVE_ARCH_TRACEHOOK
bool
config HAVE_DMA_ATTRS
bool
config USE_GENERIC_SMP_HELPERS
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
This symbol should be selected by an architecure if it supports
the API needed to access registers and stack entries from pt_regs,
declared in asm/ptrace.h
For example the kprobes-based event tracer needs this API.
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_DMA_API_DEBUG
bool
config HAVE_DEFAULT_NO_SPIN_MUTEXES
bool
config HAVE_HW_BREAKPOINT
bool
hw-breakpoints: Fix hardware breakpoints -> perf events dependency The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: Michal Marek <mmarek@suse.cz> Reported-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-17 00:33:54 +00:00
depends on PERF_EVENTS
config HAVE_MIXED_BREAKPOINTS_REGS
bool
depends on HAVE_HW_BREAKPOINT
help
Depending on the arch implementation of hardware breakpoints,
some of them have separate registers for data and instruction
breakpoints addresses, others have mixed registers to store
them but define the access type in a control register.
Select this option if your arch implements breakpoints under the
latter fashion.
config HAVE_USER_RETURN_NOTIFIER
bool
config HAVE_PERF_EVENTS_NMI
bool
help
System hardware can generate an NMI using the perf event
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
gcov: add gcov profiling infrastructure Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 23:28:08 +00:00
source "kernel/gcov/Kconfig"