kernel-ark/arch/x86/kernel/hpet.c

716 lines
16 KiB
C
Raw Normal View History

#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/hpet.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/pm.h>
#include <asm/fixmap.h>
#include <asm/hpet.h>
#include <asm/i8253.h>
#include <asm/io.h>
#define HPET_MASK CLOCKSOURCE_MASK(32)
#define HPET_SHIFT 22
/* FSEC = 10^-15
NSEC = 10^-9 */
#define FSEC_PER_NSEC 1000000
/*
* HPET address is set in acpi/boot.c, when an ACPI entry exists
*/
unsigned long hpet_address;
static void __iomem *hpet_virt_address;
unsigned long hpet_readl(unsigned long a)
{
return readl(hpet_virt_address + a);
}
static inline void hpet_writel(unsigned long d, unsigned long a)
{
writel(d, hpet_virt_address + a);
}
#ifdef CONFIG_X86_64
#include <asm/pgtable.h>
static inline void hpet_set_mapping(void)
{
set_fixmap_nocache(FIX_HPET_BASE, hpet_address);
__set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
}
static inline void hpet_clear_mapping(void)
{
hpet_virt_address = NULL;
}
#else
static inline void hpet_set_mapping(void)
{
hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
}
static inline void hpet_clear_mapping(void)
{
iounmap(hpet_virt_address);
hpet_virt_address = NULL;
}
#endif
/*
* HPET command line enable / disable
*/
static int boot_hpet_disable;
int hpet_force_user;
static int __init hpet_setup(char* str)
{
if (str) {
if (!strncmp("disable", str, 7))
boot_hpet_disable = 1;
if (!strncmp("force", str, 5))
hpet_force_user = 1;
}
return 1;
}
__setup("hpet=", hpet_setup);
static int __init disable_hpet(char *str)
{
boot_hpet_disable = 1;
return 1;
}
__setup("nohpet", disable_hpet);
static inline int is_hpet_capable(void)
{
return (!boot_hpet_disable && hpet_address);
}
/*
* HPET timer interrupt enable / disable
*/
static int hpet_legacy_int_enabled;
/**
* is_hpet_enabled - check whether the hpet timer interrupt is enabled
*/
int is_hpet_enabled(void)
{
return is_hpet_capable() && hpet_legacy_int_enabled;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(is_hpet_enabled);
/*
* When the hpet driver (/dev/hpet) is enabled, we need to reserve
* timer 0 and timer 1 in case of RTC emulation.
*/
#ifdef CONFIG_HPET
static void hpet_reserve_platform_timers(unsigned long id)
{
struct hpet __iomem *hpet = hpet_virt_address;
struct hpet_timer __iomem *timer = &hpet->hpet_timers[2];
unsigned int nrtimers, i;
struct hpet_data hd;
nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
memset(&hd, 0, sizeof (hd));
hd.hd_phys_address = hpet_address;
hd.hd_address = hpet;
hd.hd_nirqs = nrtimers;
hd.hd_flags = HPET_DATA_PLATFORM;
hpet_reserve_timer(&hd, 0);
#ifdef CONFIG_HPET_EMULATE_RTC
hpet_reserve_timer(&hd, 1);
#endif
hd.hd_irq[0] = HPET_LEGACY_8254;
hd.hd_irq[1] = HPET_LEGACY_RTC;
for (i = 2; i < nrtimers; timer++, i++)
hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
Tn_INT_ROUTE_CNF_SHIFT;
hpet_alloc(&hd);
}
#else
static void hpet_reserve_platform_timers(unsigned long id) { }
#endif
/*
* Common hpet info
*/
static unsigned long hpet_period;
static void hpet_legacy_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
static int hpet_legacy_next_event(unsigned long delta,
struct clock_event_device *evt);
/*
* The hpet clock event device
*/
static struct clock_event_device hpet_clockevent = {
.name = "hpet",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = hpet_legacy_set_mode,
.set_next_event = hpet_legacy_next_event,
.shift = 32,
.irq = 0,
.rating = 50,
};
static void hpet_start_counter(void)
{
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
}
static void hpet_resume_device(void)
{
force_hpet_resume();
}
static void hpet_restart_counter(void)
{
hpet_resume_device();
hpet_start_counter();
}
static void hpet_enable_legacy_int(void)
{
unsigned long cfg = hpet_readl(HPET_CFG);
cfg |= HPET_CFG_LEGACY;
hpet_writel(cfg, HPET_CFG);
hpet_legacy_int_enabled = 1;
}
static void hpet_legacy_clockevent_register(void)
{
uint64_t hpet_freq;
/* Start HPET legacy interrupts */
hpet_enable_legacy_int();
/*
* The period is a femto seconds value. We need to calculate the
* scaled math multiplication factor for nanosecond to hpet tick
* conversion.
*/
hpet_freq = 1000000000000000ULL;
do_div(hpet_freq, hpet_period);
hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
NSEC_PER_SEC, 32);
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
&hpet_clockevent);
/*
* Start hpet with the boot cpu mask and make it
* global after the IO_APIC has been initialized.
*/
hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
clockevents_register_device(&hpet_clockevent);
global_clock_event = &hpet_clockevent;
printk(KERN_DEBUG "hpet clockevent registered\n");
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long cfg, cmp, now;
uint64_t delta;
switch(mode) {
case CLOCK_EVT_MODE_PERIODIC:
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult;
delta >>= hpet_clockevent.shift;
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_T0_CFG);
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T0_CFG);
/*
* The first write after writing TN_SETVAL to the
* config register sets the counter value, the second
* write sets the period.
*/
hpet_writel(cmp, HPET_T0_CMP);
udelay(1);
hpet_writel((unsigned long) delta, HPET_T0_CMP);
break;
case CLOCK_EVT_MODE_ONESHOT:
cfg = hpet_readl(HPET_T0_CFG);
cfg &= ~HPET_TN_PERIODIC;
cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T0_CFG);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
cfg = hpet_readl(HPET_T0_CFG);
cfg &= ~HPET_TN_ENABLE;
hpet_writel(cfg, HPET_T0_CFG);
break;
case CLOCK_EVT_MODE_RESUME:
hpet_enable_legacy_int();
break;
}
}
static int hpet_legacy_next_event(unsigned long delta,
struct clock_event_device *evt)
{
unsigned long cnt;
cnt = hpet_readl(HPET_COUNTER);
cnt += delta;
hpet_writel(cnt, HPET_T0_CMP);
return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
}
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 08:30:50 +00:00
/*
* Clock source related code
*/
static cycle_t read_hpet(void)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
#ifdef CONFIG_X86_64
static cycle_t __vsyscall_fn vread_hpet(void)
{
return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
}
#endif
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 08:30:50 +00:00
static struct clocksource clocksource_hpet = {
.name = "hpet",
.rating = 250,
.read = read_hpet,
.mask = HPET_MASK,
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = hpet_restart_counter,
#ifdef CONFIG_X86_64
.vread = vread_hpet,
#endif
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 08:30:50 +00:00
};
static int hpet_clocksource_register(void)
{
u64 tmp, start, now;
cycle_t t1;
/* Start the counter */
hpet_start_counter();
/* Verify whether hpet counter works */
t1 = read_hpet();
rdtscll(start);
/*
* We don't know the TSC frequency yet, but waiting for
* 200000 TSC cycles is safe:
* 4 GHz == 50us
* 1 GHz == 200us
*/
do {
rep_nop();
rdtscll(now);
} while ((now - start) < 200000UL);
if (t1 == read_hpet()) {
printk(KERN_WARNING
"HPET counter not counting. HPET disabled\n");
return -ENODEV;
}
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 08:30:50 +00:00
/* Initialize and register HPET clocksource
*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
* approximated by mult/2^shift
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 08:30:50 +00:00
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
* fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
* (fsec/cyc << shift)/1000000 = mult
* (hpet_period << shift)/FSEC_PER_NSEC = mult
*/
tmp = (u64)hpet_period << HPET_SHIFT;
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
clocksource_register(&clocksource_hpet);
return 0;
}
/**
* hpet_enable - Try to setup the HPET timer. Returns 1 on success.
*/
int __init hpet_enable(void)
{
unsigned long id;
if (!is_hpet_capable())
return 0;
hpet_set_mapping();
/*
* Read the period and check for a sane value:
*/
hpet_period = hpet_readl(HPET_PERIOD);
if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
goto out_nohpet;
/*
* Read the HPET ID register to retrieve the IRQ routing
* information and the number of channels
*/
id = hpet_readl(HPET_ID);
#ifdef CONFIG_HPET_EMULATE_RTC
/*
* The legacy routing mode needs at least two channels, tick timer
* and the rtc emulation channel.
*/
if (!(id & HPET_ID_NUMBER))
goto out_nohpet;
#endif
if (hpet_clocksource_register())
goto out_nohpet;
if (id & HPET_ID_LEGSUP) {
hpet_legacy_clockevent_register();
return 1;
}
return 0;
out_nohpet:
hpet_clear_mapping();
boot_hpet_disable = 1;
return 0;
}
/*
* Needs to be late, as the reserve_timer code calls kalloc !
*
* Not a problem on i386 as hpet_enable is called from late_time_init,
* but on x86_64 it is necessary !
*/
static __init int hpet_late_init(void)
{
if (boot_hpet_disable)
return -ENODEV;
if (!hpet_address) {
if (!force_hpet_address)
return -ENODEV;
hpet_address = force_hpet_address;
hpet_enable();
if (!hpet_virt_address)
return -ENODEV;
}
hpet_reserve_platform_timers(hpet_readl(HPET_ID));
return 0;
}
fs_initcall(hpet_late_init);
void hpet_disable(void)
{
if (is_hpet_capable()) {
unsigned long cfg = hpet_readl(HPET_CFG);
if (hpet_legacy_int_enabled) {
cfg &= ~HPET_CFG_LEGACY;
hpet_legacy_int_enabled = 0;
}
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
}
}
#ifdef CONFIG_HPET_EMULATE_RTC
/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
* is enabled, we support RTC interrupt functionality in software.
* RTC has 3 kinds of interrupts:
* 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
* is updated
* 2) Alarm Interrupt - generate an interrupt at a specific time of day
* 3) Periodic Interrupt - generate periodic interrupt, with frequencies
* 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
* (1) and (2) above are implemented using polling at a frequency of
* 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
* overhead. (DEFAULT_RTC_INT_FREQ)
* For (3), we use interrupts at 64Hz or user specified periodic
* frequency, whichever is higher.
*/
#include <linux/mc146818rtc.h>
#include <linux/rtc.h>
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
#include <asm/rtc.h>
#define DEFAULT_RTC_INT_FREQ 64
#define DEFAULT_RTC_SHIFT 6
#define RTC_NUM_INTS 1
static unsigned long hpet_rtc_flags;
static unsigned long hpet_prev_update_sec;
static struct rtc_time hpet_alarm_time;
static unsigned long hpet_pie_count;
static unsigned long hpet_t1_cmp;
static unsigned long hpet_default_delta;
static unsigned long hpet_pie_delta;
static unsigned long hpet_pie_limit;
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
static rtc_irq_handler irq_handler;
/*
* Registers a IRQ handler.
*/
int hpet_register_irq_handler(rtc_irq_handler handler)
{
if (!is_hpet_enabled())
return -ENODEV;
if (irq_handler)
return -EBUSY;
irq_handler = handler;
return 0;
}
EXPORT_SYMBOL_GPL(hpet_register_irq_handler);
/*
* Deregisters the IRQ handler registered with hpet_register_irq_handler()
* and does cleanup.
*/
void hpet_unregister_irq_handler(rtc_irq_handler handler)
{
if (!is_hpet_enabled())
return;
irq_handler = NULL;
hpet_rtc_flags = 0;
}
EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler);
/*
* Timer 1 for RTC emulation. We use one shot mode, as periodic mode
* is not supported by all HPET implementations for timer 1.
*
* hpet_rtc_timer_init() is called when the rtc is initialized.
*/
int hpet_rtc_timer_init(void)
{
unsigned long cfg, cnt, delta, flags;
if (!is_hpet_enabled())
return 0;
if (!hpet_default_delta) {
uint64_t clc;
clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT;
hpet_default_delta = (unsigned long) clc;
}
if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
delta = hpet_default_delta;
else
delta = hpet_pie_delta;
local_irq_save(flags);
cnt = delta + hpet_readl(HPET_COUNTER);
hpet_writel(cnt, HPET_T1_CMP);
hpet_t1_cmp = cnt;
cfg = hpet_readl(HPET_T1_CFG);
cfg &= ~HPET_TN_PERIODIC;
cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T1_CFG);
local_irq_restore(flags);
return 1;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
/*
* The functions below are called from rtc driver.
* Return 0 if HPET is not being used.
* Otherwise do the necessary changes and return 1.
*/
int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
{
if (!is_hpet_enabled())
return 0;
hpet_rtc_flags &= ~bit_mask;
return 1;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
int hpet_set_rtc_irq_bit(unsigned long bit_mask)
{
unsigned long oldbits = hpet_rtc_flags;
if (!is_hpet_enabled())
return 0;
hpet_rtc_flags |= bit_mask;
if (!oldbits)
hpet_rtc_timer_init();
return 1;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_set_rtc_irq_bit);
int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
unsigned char sec)
{
if (!is_hpet_enabled())
return 0;
hpet_alarm_time.tm_hour = hrs;
hpet_alarm_time.tm_min = min;
hpet_alarm_time.tm_sec = sec;
return 1;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_set_alarm_time);
int hpet_set_periodic_freq(unsigned long freq)
{
uint64_t clc;
if (!is_hpet_enabled())
return 0;
if (freq <= DEFAULT_RTC_INT_FREQ)
hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
else {
clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
do_div(clc, freq);
clc >>= hpet_clockevent.shift;
hpet_pie_delta = (unsigned long) clc;
}
return 1;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_set_periodic_freq);
int hpet_rtc_dropped_irq(void)
{
return is_hpet_enabled();
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
static void hpet_rtc_timer_reinit(void)
{
unsigned long cfg, delta;
int lost_ints = -1;
if (unlikely(!hpet_rtc_flags)) {
cfg = hpet_readl(HPET_T1_CFG);
cfg &= ~HPET_TN_ENABLE;
hpet_writel(cfg, HPET_T1_CFG);
return;
}
if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
delta = hpet_default_delta;
else
delta = hpet_pie_delta;
/*
* Increment the comparator value until we are ahead of the
* current count.
*/
do {
hpet_t1_cmp += delta;
hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
lost_ints++;
} while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0);
if (lost_ints) {
if (hpet_rtc_flags & RTC_PIE)
hpet_pie_count += lost_ints;
if (printk_ratelimit())
printk(KERN_WARNING "rtc: lost %d interrupts\n",
lost_ints);
}
}
irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
{
struct rtc_time curr_time;
unsigned long rtc_int_flag = 0;
hpet_rtc_timer_reinit();
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
memset(&curr_time, 0, sizeof(struct rtc_time));
if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
get_rtc_time(&curr_time);
if (hpet_rtc_flags & RTC_UIE &&
curr_time.tm_sec != hpet_prev_update_sec) {
rtc_int_flag = RTC_UF;
hpet_prev_update_sec = curr_time.tm_sec;
}
if (hpet_rtc_flags & RTC_PIE &&
++hpet_pie_count >= hpet_pie_limit) {
rtc_int_flag |= RTC_PF;
hpet_pie_count = 0;
}
if (hpet_rtc_flags & RTC_AIE &&
(curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
(curr_time.tm_min == hpet_alarm_time.tm_min) &&
(curr_time.tm_hour == hpet_alarm_time.tm_hour))
rtc_int_flag |= RTC_AF;
if (rtc_int_flag) {
rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
if (irq_handler)
irq_handler(rtc_int_flag, dev_id);
}
return IRQ_HANDLED;
}
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:33:28 +00:00
EXPORT_SYMBOL_GPL(hpet_rtc_interrupt);
#endif