41 lines
1.1 KiB
Plaintext
41 lines
1.1 KiB
Plaintext
|
README for WarpEngine/A4000T/A4091 SCSI kernels.
|
||
|
|
|
||
|
|
Use the following options to disable options in the SCSI driver.
|
||
|
|
|
||
|
|
Using amiboot for example.....
|
||
|
|
|
||
|
|
To disable Synchronous Negotiation....
|
||
|
|
|
||
|
|
amiboot -k kernel 53c7xx=nosync:0
|
||
|
|
|
||
|
|
To disable Disconnection....
|
||
|
|
|
||
|
|
amiboot -k kernel 53c7xx=nodisconnect:0
|
||
|
|
|
||
|
|
To disable certain SCSI devices...
|
||
|
|
|
||
|
|
amiboot -k kernel 53c7xx=validids:0x3F
|
||
|
|
|
||
|
|
this allows only device ID's 0,1,2,3,4 and 5 for linux to handle.
|
||
|
|
(this is a bitmasked field - i.e. each bit represents a SCSI ID)
|
||
|
|
|
||
|
|
These commands work on a per controller basis and use the option 'next' to
|
||
|
|
move to the next controller in the system.
|
||
|
|
|
||
|
|
e.g.
|
||
|
|
amiboot -k kernel 53c7xx=nodisconnect:0,next,nosync:0
|
||
|
|
|
||
|
|
this uses No Disconnection on the first controller and Asynchronous
|
||
|
|
SCSI on the second controller.
|
||
|
|
|
||
|
|
Known Issues:
|
||
|
|
|
||
|
|
Two devices are known not to function with the default settings of using
|
||
|
|
synchronous SCSI. These are the Archive Viper 150 Tape Drive and the
|
||
|
|
SyQuest SQ555 removeable hard drive. When using these devices on a controller
|
||
|
|
use the 'nosync:0' option.
|
||
|
|
|
||
|
|
Please try these options and post any problems/successes to me.
|
||
|
|
|
||
|
|
Alan Hourihane <alanh@fairlite.demon.co.uk>
|