davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c6ffc5ca8f
kernel-ark/net/atm/common.c

905 lines
21 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* net/atm/common.c - ATM sockets (common part for PVC and SVC) */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/net.h> /* struct socket, struct proto_ops */
#include <linux/atm.h> /* ATM stuff */
#include <linux/atmdev.h>
#include <linux/socket.h> /* SOL_SOCKET */
#include <linux/errno.h> /* error codes */
#include <linux/capability.h>
[PATCH] misc verify_area cleanups There were still a few comments left refering to verify_area, and two functions, verify_area_skas & verify_area_tt that just wrap corresponding access_ok_skas & access_ok_tt functions, just like verify_area does for access_ok - deprecate those. There was also a few places that still used verify_area in commented-out code, fix those up to use access_ok. After applying this one there should not be anything left but finally removing verify_area completely, which will happen after a kernel release or two. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:08 +00:00
#include <linux/mm.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-08 17:51:30 +00:00
#include <linux/sched/signal.h>
atm: mpoa: remove 32-bit timekeeping net/atm/mpoa_* files use 'struct timeval' to store event timestamps. struct timeval uses a 32-bit seconds field which will overflow in the year 2038 and beyond. Morever, the timestamps are being compared only to get seconds elapsed, so struct timeval which stores a seconds and microseconds field is an overkill. This patch replaces the use of struct timeval with time64_t to store a 64-bit seconds field. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27 14:02:17 +00:00
#include <linux/time64.h> /* 64-bit time for seconds */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/skbuff.h>
#include <linux/bitops.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <net/sock.h> /* struct sock */
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
#include <linux/uaccess.h>
#include <linux/poll.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 23:09:06 +00:00
#include <linux/atomic.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include "resources.h" /* atm_find_dev */
#include "common.h" /* prototypes */
#include "protocols.h" /* atm_init_<transport> */
#include "addr.h" /* address registry */
#include "signaling.h" /* for WAITING and sigd_attach */
struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
EXPORT_SYMBOL(vcc_hash);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
DEFINE_RWLOCK(vcc_sklist_lock);
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
EXPORT_SYMBOL(vcc_sklist_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
atm: propagate signal changes via notifier Add notifier chain for changes in atm_dev. Clients like br2684 will call register_atmdevice_notifier() to be notified of changes. Drivers will call atm_dev_signal_change() to notify clients like br2684 of the change. On DSL and ATM devices it's usefull to have a know if you have a carrier signal. netdevice LOWER_UP changes can be propagated to userspace via netlink monitor. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 20:55:30 +00:00
static ATOMIC_NOTIFIER_HEAD(atm_dev_notify_chain);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void __vcc_insert_socket(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
struct hlist_head *head = &vcc_hash[vcc->vci & (VCC_HTABLE_SIZE - 1)];
[INET]: speedup inet (tcp/dccp) lookups Arnaldo and I agreed it could be applied now, because I have other pending patches depending on this one (Thank you Arnaldo) (The other important patch moves skc_refcnt in a separate cache line, so that the SMP/NUMA performance doesnt suffer from cache line ping pongs) 1) First some performance data : -------------------------------- tcp_v4_rcv() wastes a *lot* of time in __inet_lookup_established() The most time critical code is : sk_for_each(sk, node, &head->chain) { if (INET_MATCH(sk, acookie, saddr, daddr, ports, dif)) goto hit; /* You sunk my battleship! */ } The sk_for_each() does use prefetch() hints but only the begining of "struct sock" is prefetched. As INET_MATCH first comparison uses inet_sk(__sk)->daddr, wich is far away from the begining of "struct sock", it has to bring into CPU cache cold cache line. Each iteration has to use at least 2 cache lines. This can be problematic if some chains are very long. 2) The goal ----------- The idea I had is to change things so that INET_MATCH() may return FALSE in 99% of cases only using the data already in the CPU cache, using one cache line per iteration. 3) Description of the patch --------------------------- Adds a new 'unsigned int skc_hash' field in 'struct sock_common', filling a 32 bits hole on 64 bits platform. struct sock_common { unsigned short skc_family; volatile unsigned char skc_state; unsigned char skc_reuse; int skc_bound_dev_if; struct hlist_node skc_node; struct hlist_node skc_bind_node; atomic_t skc_refcnt; + unsigned int skc_hash; struct proto *skc_prot; }; Store in this 32 bits field the full hash, not masked by (ehash_size - 1) Using this full hash as the first comparison done in INET_MATCH permits us immediatly skip the element without touching a second cache line in case of a miss. Suppress the sk_hashent/tw_hashent fields since skc_hash (aliased to sk_hash and tw_hash) already contains the slot number if we mask with (ehash_size - 1) File include/net/inet_hashtables.h 64 bits platforms : #define INET_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) ((*((__u64 *)&(inet_sk(__sk)->daddr)))== (__cookie)) && \ ((*((__u32 *)&(inet_sk(__sk)->dport))) == (__ports)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) 32bits platforms: #define TCP_IPV4_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) && \ (inet_sk(__sk)->daddr == (__saddr)) && \ (inet_sk(__sk)->rcv_saddr == (__daddr)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) - Adds a prefetch(head->chain.first) in __inet_lookup_established()/__tcp_v4_check_established() and __inet6_lookup_established()/__tcp_v6_check_established() and __dccp_v4_check_established() to bring into cache the first element of the list, before the {read|write}_lock(&head->lock); Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 21:13:38 +00:00
sk->sk_hash = vcc->vci & (VCC_HTABLE_SIZE - 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sk_add_node(sk, head);
}
void vcc_insert_socket(struct sock *sk)
{
write_lock_irq(&vcc_sklist_lock);
__vcc_insert_socket(sk);
write_unlock_irq(&vcc_sklist_lock);
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
EXPORT_SYMBOL(vcc_insert_socket);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void vcc_remove_socket(struct sock *sk)
{
write_lock_irq(&vcc_sklist_lock);
sk_del_node_init(sk);
write_unlock_irq(&vcc_sklist_lock);
}
atm: remove an unnecessary loop Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 00:41:36 +00:00
static bool vcc_tx_ready(struct atm_vcc *vcc, unsigned int size)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sock *sk = sk_atm(vcc);
atm: sk_wmem_alloc initial value is one commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. This broke net/atm since this protocol assumed a null initial value. This patch makes necessary changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18 02:06:12 +00:00
if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 22:22:09 +00:00
pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
atm: remove an unnecessary loop Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 00:41:36 +00:00
return false;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
atm: remove an unnecessary loop Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 00:41:36 +00:00
return true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void vcc_sock_destruct(struct sock *sk)
{
if (atomic_read(&sk->sk_rmem_alloc))
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
printk(KERN_DEBUG "%s: rmem leakage (%d bytes) detected.\n",
__func__, atomic_read(&sk->sk_rmem_alloc));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
net: convert sock.sk_wmem_alloc from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 10:08:00 +00:00
if (refcount_read(&sk->sk_wmem_alloc))
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
printk(KERN_DEBUG "%s: wmem leakage (%d bytes) detected.\n",
net: convert sock.sk_wmem_alloc from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 10:08:00 +00:00
__func__, refcount_read(&sk->sk_wmem_alloc));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void vcc_def_wakeup(struct sock *sk)
{
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
struct socket_wq *wq;
rcu_read_lock();
wq = rcu_dereference(sk->sk_wq);
net: Generalise wq_has_sleeper helper The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-26 05:55:39 +00:00
if (skwq_has_sleeper(wq))
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
wake_up(&wq->wait);
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static inline int vcc_writable(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
return (vcc->qos.txtp.max_sdu +
net: convert sock.sk_wmem_alloc from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 10:08:00 +00:00
refcount_read(&sk->sk_wmem_alloc)) <= sk->sk_sndbuf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void vcc_write_space(struct sock *sk)
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
{
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
struct socket_wq *wq;
rcu_read_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (vcc_writable(sk)) {
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
wq = rcu_dereference(sk->sk_wq);
net: Generalise wq_has_sleeper helper The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-26 05:55:39 +00:00
if (skwq_has_sleeper(wq))
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
wake_up_interruptible(&wq->wait);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[NET]: Name magic constants in sock_wake_async() The sock_wake_async() performs a bit different actions depending on "how" argument. Unfortunately this argument ony has numerical magic values. I propose to give names to their constants to help people reading this function callers understand what's going on without looking into this function all the time. I suppose this is 2.6.25 material, but if it's not (or the naming seems poor/bad/awful), I can rework it against the current net-2.6 tree. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-26 12:10:50 +00:00
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net: sock_def_readable() and friends RCU conversion sk_callback_lock rwlock actually protects sk->sk_sleep pointer, so we need two atomic operations (and associated dirtying) per incoming packet. RCU conversion is pretty much needed : 1) Add a new structure, called "struct socket_wq" to hold all fields that will need rcu_read_lock() protection (currently: a wait_queue_head_t and a struct fasync_struct pointer). [Future patch will add a list anchor for wakeup coalescing] 2) Attach one of such structure to each "struct socket" created in sock_alloc_inode(). 3) Respect RCU grace period when freeing a "struct socket_wq" 4) Change sk_sleep pointer in "struct sock" by sk_wq, pointer to "struct socket_wq" 5) Change sk_sleep() function to use new sk->sk_wq instead of sk->sk_sleep 6) Change sk_has_sleeper() to wq_has_sleeper() that must be used inside a rcu_read_lock() section. 7) Change all sk_has_sleeper() callers to : - Use rcu_read_lock() instead of read_lock(&sk->sk_callback_lock) - Use wq_has_sleeper() to eventually wakeup tasks. - Use rcu_read_unlock() instead of read_unlock(&sk->sk_callback_lock) 8) sock_wake_async() is modified to use rcu protection as well. 9) Exceptions : macvtap, drivers/net/tun.c, af_unix use integrated "struct socket_wq" instead of dynamically allocated ones. They dont need rcu freeing. Some cleanups or followups are probably needed, (possible sk_callback_lock conversion to a spinlock for example...). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 11:01:49 +00:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
atm: add release_cb() callback to vcc The immediate use case for this is that it will allow us to ensure that a pppoatm queue is woken after it has to drop a packet due to the sock being locked. Note that 'release_cb' is called when the socket is *unlocked*. This is not to be confused with vcc_release() — which probably ought to be called vcc_close(). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Krzysztof Mazur <krzysiek@podlesie.net>
2012-11-28 00:03:11 +00:00
static void vcc_release_cb(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
if (vcc->release_cb)
vcc->release_cb(vcc);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static struct proto vcc_proto = {
.name = "VCC",
.owner = THIS_MODULE,
.obj_size = sizeof(struct atm_vcc),
atm: add release_cb() callback to vcc The immediate use case for this is that it will allow us to ensure that a pppoatm queue is woken after it has to drop a packet due to the sock being locked. Note that 'release_cb' is called when the socket is *unlocked*. This is not to be confused with vcc_release() — which probably ought to be called vcc_close(). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Krzysztof Mazur <krzysiek@podlesie.net>
2012-11-28 00:03:11 +00:00
.release_cb = vcc_release_cb,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
net: Pass kern from net_proto_family.create to sk_alloc In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 02:09:13 +00:00
int vcc_create(struct net *net, struct socket *sock, int protocol, int family, int kern)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sock *sk;
struct atm_vcc *vcc;
sock->sk = NULL;
if (sock->type == SOCK_STREAM)
return -EINVAL;
net: Pass kern from net_proto_family.create to sk_alloc In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 02:09:13 +00:00
sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto, kern);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!sk)
return -ENOMEM;
sock_init_data(sock, sk);
sk->sk_state_change = vcc_def_wakeup;
sk->sk_write_space = vcc_write_space;
vcc = atm_sk(sk);
vcc->dev = NULL;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
memset(&vcc->local, 0, sizeof(struct sockaddr_atmsvc));
memset(&vcc->remote, 0, sizeof(struct sockaddr_atmsvc));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
vcc->qos.txtp.max_sdu = 1 << 16; /* for meta VCs */
net: convert sock.sk_wmem_alloc from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 10:08:00 +00:00
refcount_set(&sk->sk_wmem_alloc, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
atomic_set(&sk->sk_rmem_alloc, 0);
vcc->push = NULL;
vcc->pop = NULL;
atm: add owner of push() callback to atmvcc The atm is using atmvcc->push(vcc, NULL) callback to notify protocol that vcc will be closed and protocol must detach from it. This callback is usually used by protocol to decrement module usage count by module_put(), but it leaves small window then module is still used after module_put(). Now the owner of push() callback is kept in atmvcc and module_put(atmvcc->owner) is called after the protocol is detached from vcc. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
2012-11-06 22:16:57 +00:00
vcc->owner = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
vcc->push_oam = NULL;
atm: add release_cb() callback to vcc The immediate use case for this is that it will allow us to ensure that a pppoatm queue is woken after it has to drop a packet due to the sock being locked. Note that 'release_cb' is called when the socket is *unlocked*. This is not to be confused with vcc_release() — which probably ought to be called vcc_close(). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Krzysztof Mazur <krzysiek@podlesie.net>
2012-11-28 00:03:11 +00:00
vcc->release_cb = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
vcc->vpi = vcc->vci = 0; /* no VCI/VPI yet */
vcc->atm_options = vcc->aal_options = 0;
sk->sk_destruct = vcc_sock_destruct;
return 0;
}
static void vcc_destroy_socket(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
struct sk_buff *skb;
set_bit(ATM_VF_CLOSE, &vcc->flags);
clear_bit(ATM_VF_READY, &vcc->flags);
if (vcc->dev) {
if (vcc->dev->ops->close)
vcc->dev->ops->close(vcc);
if (vcc->push)
vcc->push(vcc, NULL); /* atmarpd has no push */
atm: add owner of push() callback to atmvcc The atm is using atmvcc->push(vcc, NULL) callback to notify protocol that vcc will be closed and protocol must detach from it. This callback is usually used by protocol to decrement module usage count by module_put(), but it leaves small window then module is still used after module_put(). Now the owner of push() callback is kept in atmvcc and module_put(atmvcc->owner) is called after the protocol is detached from vcc. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
2012-11-06 22:16:57 +00:00
module_put(vcc->owner);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
atm_return(vcc, skb->truesize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree_skb(skb);
}
module_put(vcc->dev->ops->owner);
atm_dev_put(vcc->dev);
}
[ATM]: track and close listen sockets when sigd exits Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
2005-09-28 23:35:01 +00:00
vcc_remove_socket(sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
int vcc_release(struct socket *sock)
{
struct sock *sk = sock->sk;
if (sk) {
lock_sock(sk);
vcc_destroy_socket(sock->sk);
release_sock(sk);
sock_put(sk);
}
return 0;
}
void vcc_release_async(struct atm_vcc *vcc, int reply)
{
struct sock *sk = sk_atm(vcc);
set_bit(ATM_VF_CLOSE, &vcc->flags);
sk->sk_shutdown |= RCV_SHUTDOWN;
sk->sk_err = -reply;
clear_bit(ATM_VF_WAITING, &vcc->flags);
sk->sk_state_change(sk);
}
EXPORT_SYMBOL(vcc_release_async);
atm: Introduce vcc_process_recv_queue This function moves the implementation found in the clip and br2684 modules to common code, correctly unlinks the skb from the queue before pushing it and makes pppoatm use it. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 10:25:57 +00:00
void vcc_process_recv_queue(struct atm_vcc *vcc)
{
struct sk_buff_head queue, *rq;
struct sk_buff *skb, *tmp;
unsigned long flags;
__skb_queue_head_init(&queue);
rq = &sk_atm(vcc)->sk_receive_queue;
spin_lock_irqsave(&rq->lock, flags);
skb_queue_splice_init(rq, &queue);
spin_unlock_irqrestore(&rq->lock, flags);
skb_queue_walk_safe(&queue, skb, tmp) {
__skb_unlink(skb, &queue);
vcc->push(vcc, skb);
}
}
EXPORT_SYMBOL(vcc_process_recv_queue);
atm: propagate signal changes via notifier Add notifier chain for changes in atm_dev. Clients like br2684 will call register_atmdevice_notifier() to be notified of changes. Drivers will call atm_dev_signal_change() to notify clients like br2684 of the change. On DSL and ATM devices it's usefull to have a know if you have a carrier signal. netdevice LOWER_UP changes can be propagated to userspace via netlink monitor. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 20:55:30 +00:00
void atm_dev_signal_change(struct atm_dev *dev, char signal)
{
pr_debug("%s signal=%d dev=%p number=%d dev->signal=%d\n",
__func__, signal, dev, dev->number, dev->signal);
/* atm driver sending invalid signal */
WARN_ON(signal < ATM_PHY_SIG_LOST || signal > ATM_PHY_SIG_FOUND);
if (dev->signal == signal)
return; /* no change */
dev->signal = signal;
atomic_notifier_call_chain(&atm_dev_notify_chain, signal, dev);
}
EXPORT_SYMBOL(atm_dev_signal_change);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
void atm_dev_release_vccs(struct atm_dev *dev)
{
int i;
write_lock_irq(&vcc_sklist_lock);
for (i = 0; i < VCC_HTABLE_SIZE; i++) {
struct hlist_head *head = &vcc_hash[i];
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
struct hlist_node *tmp;
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
struct sock *s;
struct atm_vcc *vcc;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
sk_for_each_safe(s, tmp, head) {
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
vcc = atm_sk(s);
if (vcc->dev == dev) {
vcc_release_async(vcc, -EPIPE);
sk_del_node_init(s);
}
}
}
write_unlock_irq(&vcc_sklist_lock);
}
atm/solos-pci: Don't flap VCs when carrier state changes Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30 13:17:04 +00:00
EXPORT_SYMBOL(atm_dev_release_vccs);
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
static int adjust_tp(struct atm_trafprm *tp, unsigned char aal)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int max_sdu;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (!tp->traffic_class)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
switch (aal) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
case ATM_AAL0:
max_sdu = ATM_CELL_SIZE-1;
break;
case ATM_AAL34:
max_sdu = ATM_MAX_AAL34_PDU;
break;
default:
atm: Convert pr_warning to pr_warn Use the more common pr_warn. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 04:17:28 +00:00
pr_warn("AAL problems ... (%d)\n", aal);
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
/* fall through */
case ATM_AAL5:
max_sdu = ATM_MAX_AAL5_PDU;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (!tp->max_sdu)
tp->max_sdu = max_sdu;
else if (tp->max_sdu > max_sdu)
return -EINVAL;
if (!tp->max_cdv)
tp->max_cdv = ATM_MAX_CDV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 23:20:06 +00:00
static int check_ci(const struct atm_vcc *vcc, short vpi, int vci)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
struct hlist_head *head = &vcc_hash[vci & (VCC_HTABLE_SIZE - 1)];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct sock *s;
struct atm_vcc *walk;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
sk_for_each(s, head) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
walk = atm_sk(s);
if (walk->dev != vcc->dev)
continue;
if (test_bit(ATM_VF_ADDR, &walk->flags) && walk->vpi == vpi &&
walk->vci == vci && ((walk->qos.txtp.traffic_class !=
ATM_NONE && vcc->qos.txtp.traffic_class != ATM_NONE) ||
(walk->qos.rxtp.traffic_class != ATM_NONE &&
vcc->qos.rxtp.traffic_class != ATM_NONE)))
return -EADDRINUSE;
}
/* allow VCCs with same VPI/VCI iff they don't collide on
TX/RX (but we may refuse such sharing for other reasons,
e.g. if protocol requires to have both channels) */
return 0;
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 23:20:06 +00:00
static int find_ci(const struct atm_vcc *vcc, short *vpi, int *vci)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
static short p; /* poor man's per-device cache */
static int c;
short old_p;
int old_c;
int err;
if (*vpi != ATM_VPI_ANY && *vci != ATM_VCI_ANY) {
err = check_ci(vcc, *vpi, *vci);
return err;
}
/* last scan may have left values out of bounds for current device */
if (*vpi != ATM_VPI_ANY)
p = *vpi;
else if (p >= 1 << vcc->dev->ci_range.vpi_bits)
p = 0;
if (*vci != ATM_VCI_ANY)
c = *vci;
else if (c < ATM_NOT_RSV_VCI || c >= 1 << vcc->dev->ci_range.vci_bits)
c = ATM_NOT_RSV_VCI;
old_p = p;
old_c = c;
do {
if (!check_ci(vcc, p, c)) {
*vpi = p;
*vci = c;
return 0;
}
if (*vci == ATM_VCI_ANY) {
c++;
if (c >= 1 << vcc->dev->ci_range.vci_bits)
c = ATM_NOT_RSV_VCI;
}
if ((c == ATM_NOT_RSV_VCI || *vci != ATM_VCI_ANY) &&
*vpi == ATM_VPI_ANY) {
p++;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (p >= 1 << vcc->dev->ci_range.vpi_bits)
p = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
} while (old_p != p || old_c != c);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EADDRINUSE;
}
static int __vcc_connect(struct atm_vcc *vcc, struct atm_dev *dev, short vpi,
int vci)
{
struct sock *sk = sk_atm(vcc);
int error;
if ((vpi != ATM_VPI_UNSPEC && vpi != ATM_VPI_ANY &&
vpi >> dev->ci_range.vpi_bits) || (vci != ATM_VCI_UNSPEC &&
vci != ATM_VCI_ANY && vci >> dev->ci_range.vci_bits))
return -EINVAL;
if (vci > 0 && vci < ATM_NOT_RSV_VCI && !capable(CAP_NET_BIND_SERVICE))
return -EPERM;
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
error = -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!try_module_get(dev->ops->owner))
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
vcc->dev = dev;
write_lock_irq(&vcc_sklist_lock);
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
if (test_bit(ATM_DF_REMOVED, &dev->flags) ||
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:16:41 +00:00
(error = find_ci(vcc, &vpi, &vci))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_unlock_irq(&vcc_sklist_lock);
goto fail_module_put;
}
vcc->vpi = vpi;
vcc->vci = vci;
__vcc_insert_socket(sk);
write_unlock_irq(&vcc_sklist_lock);
switch (vcc->qos.aal) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
case ATM_AAL0:
error = atm_init_aal0(vcc);
vcc->stats = &dev->stats.aal0;
break;
case ATM_AAL34:
error = atm_init_aal34(vcc);
vcc->stats = &dev->stats.aal34;
break;
case ATM_NO_AAL:
/* ATM_AAL5 is also used in the "0 for default" case */
vcc->qos.aal = ATM_AAL5;
/* fall through */
case ATM_AAL5:
error = atm_init_aal5(vcc);
vcc->stats = &dev->stats.aal5;
break;
default:
error = -EPROTOTYPE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (!error)
error = adjust_tp(&vcc->qos.txtp, vcc->qos.aal);
if (!error)
error = adjust_tp(&vcc->qos.rxtp, vcc->qos.aal);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (error)
goto fail;
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_debug("VCC %d.%d, AAL %d\n", vpi, vci, vcc->qos.aal);
pr_debug(" TX: %d, PCR %d..%d, SDU %d\n",
vcc->qos.txtp.traffic_class,
vcc->qos.txtp.min_pcr,
vcc->qos.txtp.max_pcr,
vcc->qos.txtp.max_sdu);
pr_debug(" RX: %d, PCR %d..%d, SDU %d\n",
vcc->qos.rxtp.traffic_class,
vcc->qos.rxtp.min_pcr,
vcc->qos.rxtp.max_pcr,
vcc->qos.rxtp.max_sdu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (dev->ops->open) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = dev->ops->open(vcc);
if (error)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto fail;
}
return 0;
fail:
vcc_remove_socket(sk);
fail_module_put:
module_put(dev->ops->owner);
/* ensure we get dev module ref count correct */
vcc->dev = NULL;
return error;
}
int vcc_connect(struct socket *sock, int itf, short vpi, int vci)
{
struct atm_dev *dev;
struct atm_vcc *vcc = ATM_SD(sock);
int error;
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_debug("(vpi %d, vci %d)\n", vpi, vci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (sock->state == SS_CONNECTED)
return -EISCONN;
if (sock->state != SS_UNCONNECTED)
return -EINVAL;
if (!(vpi || vci))
return -EINVAL;
if (vpi != ATM_VPI_UNSPEC && vci != ATM_VCI_UNSPEC)
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
clear_bit(ATM_VF_PARTIAL, &vcc->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (test_bit(ATM_VF_PARTIAL, &vcc->flags))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EINVAL;
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_debug("(TX: cl %d,bw %d-%d,sdu %d; "
"RX: cl %d,bw %d-%d,sdu %d,AAL %s%d)\n",
vcc->qos.txtp.traffic_class, vcc->qos.txtp.min_pcr,
vcc->qos.txtp.max_pcr, vcc->qos.txtp.max_sdu,
vcc->qos.rxtp.traffic_class, vcc->qos.rxtp.min_pcr,
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
vcc->qos.rxtp.max_pcr, vcc->qos.rxtp.max_sdu,
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
vcc->qos.aal == ATM_AAL5 ? "" :
vcc->qos.aal == ATM_AAL0 ? "" : " ??? code ",
vcc->qos.aal == ATM_AAL0 ? 0 : vcc->qos.aal);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!test_bit(ATM_VF_HASQOS, &vcc->flags))
return -EBADFD;
if (vcc->qos.txtp.traffic_class == ATM_ANYCLASS ||
vcc->qos.rxtp.traffic_class == ATM_ANYCLASS)
return -EINVAL;
[ATM]: always return the first interface for ATM_ITF_ANY From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:13:32 +00:00
if (likely(itf != ATM_ITF_ANY)) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
dev = try_then_request_module(atm_dev_lookup(itf),
"atm-device-%d", itf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
dev = NULL;
[NET]: sem2mutex part 2 Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:35:41 +00:00
mutex_lock(&atm_dev_mutex);
[ATM]: always return the first interface for ATM_ITF_ANY From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:13:32 +00:00
if (!list_empty(&atm_devs)) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
dev = list_entry(atm_devs.next,
struct atm_dev, dev_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
atm_dev_hold(dev);
}
[NET]: sem2mutex part 2 Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:35:41 +00:00
mutex_unlock(&atm_dev_mutex);
[ATM]: always return the first interface for ATM_ITF_ANY From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-30 00:13:32 +00:00
}
if (!dev)
return -ENODEV;
error = __vcc_connect(vcc, dev, vpi, vci);
if (error) {
atm_dev_put(dev);
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC)
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
set_bit(ATM_VF_PARTIAL, &vcc->flags);
if (test_bit(ATM_VF_READY, &ATM_SD(sock)->flags))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sock->state = SS_CONNECTED;
return 0;
}
net: Remove iocb argument from sendmsg and recvmsg After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 07:37:48 +00:00
int vcc_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sock *sk = sock->sk;
struct atm_vcc *vcc;
struct sk_buff *skb;
int copied, error = -EINVAL;
if (sock->state != SS_CONNECTED)
return -ENOTCONN;
atm: Allow MSG_PEEK for atm sockets Now that the vcc backends do the right thing with respect the receive queue on registration, allow MSK_PEEK for atm sockets. This allows a userspace program to inspect the packets and decide what backend to use to handle them. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 10:25:58 +00:00
/* only handle MSG_DONTWAIT and MSG_PEEK */
if (flags & ~(MSG_DONTWAIT | MSG_PEEK))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EOPNOTSUPP;
atm: Allow MSG_PEEK for atm sockets Now that the vcc backends do the right thing with respect the receive queue on registration, allow MSK_PEEK for atm sockets. This allows a userspace program to inspect the packets and decide what backend to use to handle them. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 10:25:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
vcc = ATM_SD(sock);
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (test_bit(ATM_VF_RELEASED, &vcc->flags) ||
test_bit(ATM_VF_CLOSE, &vcc->flags) ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
!test_bit(ATM_VF_READY, &vcc->flags))
return 0;
skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &error);
if (!skb)
return error;
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
copied = skb->len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (copied > size) {
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
copied = size;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
msg->msg_flags |= MSG_TRUNC;
}
net: Add and use skb_copy_datagram_msg() helper. This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 21:46:40 +00:00
error = skb_copy_datagram_msg(skb, 0, msg, copied);
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
if (error)
return error;
net: Generalize socket rx gap / receive queue overflow cmsg Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 20:26:31 +00:00
sock_recv_ts_and_drops(msg, sk, skb);
atm: Allow MSG_PEEK for atm sockets Now that the vcc backends do the right thing with respect the receive queue on registration, allow MSK_PEEK for atm sockets. This allows a userspace program to inspect the packets and decide what backend to use to handle them. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 10:25:58 +00:00
if (!(flags & MSG_PEEK)) {
pr_debug("%d -= %d\n", atomic_read(&sk->sk_rmem_alloc),
skb->truesize);
atm_return(vcc, skb->truesize);
}
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
skb_free_datagram(sk, skb);
return copied;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net: Remove iocb argument from sendmsg and recvmsg After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 07:37:48 +00:00
int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t size)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sock *sk = sock->sk;
DEFINE_WAIT(wait);
struct atm_vcc *vcc;
struct sk_buff *skb;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
int eff, error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
lock_sock(sk);
if (sock->state != SS_CONNECTED) {
error = -ENOTCONN;
goto out;
}
if (m->msg_name) {
error = -EISCONN;
goto out;
}
vcc = ATM_SD(sock);
if (test_bit(ATM_VF_RELEASED, &vcc->flags) ||
test_bit(ATM_VF_CLOSE, &vcc->flags) ||
!test_bit(ATM_VF_READY, &vcc->flags)) {
error = -EPIPE;
send_sig(SIGPIPE, current, 0);
goto out;
}
if (!size) {
error = 0;
goto out;
}
[atm] switch vcc_sendmsg() to copy_from_iter() ... and make it handle multi-segment iovecs - deals with that "fix this later" issue for free. A bit of shame, really - it had been there since 2.3.15pre3 when the whole thing went into the tree, practically a historical artefact by now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-20 12:01:29 +00:00
if (size > vcc->qos.txtp.max_sdu) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
error = -EMSGSIZE;
goto out;
}
[PATCH] misc verify_area cleanups There were still a few comments left refering to verify_area, and two functions, verify_area_skas & verify_area_tt that just wrap corresponding access_ok_skas & access_ok_tt functions, just like verify_area does for access_ok - deprecate those. There was also a few places that still used verify_area in commented-out code, fix those up to use access_ok. After applying this one there should not be anything left but finally removing verify_area completely, which will happen after a kernel release or two. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
eff = (size+3) & ~3; /* align to word boundary */
net: sk_sleep() helper Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 13:03:51 +00:00
prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
error = 0;
atm: remove an unnecessary loop Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 00:41:36 +00:00
while (!vcc_tx_ready(vcc, eff)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (m->msg_flags & MSG_DONTWAIT) {
error = -EAGAIN;
break;
}
schedule();
if (signal_pending(current)) {
error = -ERESTARTSYS;
break;
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (test_bit(ATM_VF_RELEASED, &vcc->flags) ||
test_bit(ATM_VF_CLOSE, &vcc->flags) ||
!test_bit(ATM_VF_READY, &vcc->flags)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
error = -EPIPE;
send_sig(SIGPIPE, current, 0);
break;
}
net: sk_sleep() helper Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 13:03:51 +00:00
prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net: sk_sleep() helper Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 13:03:51 +00:00
finish_wait(sk_sleep(sk), &wait);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (error)
goto out;
atm: remove an unnecessary loop Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 00:41:36 +00:00
skb = alloc_skb(eff, GFP_KERNEL);
if (!skb) {
error = -ENOMEM;
goto out;
}
pr_debug("%d += %d\n", sk_wmem_alloc_get(sk), skb->truesize);
atm: Preserve value of skb->truesize when accounting to vcc ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on which they are to be sent. But it doesn't take ownership of those packets from the sock (if any) which originally owned them. They should remain owned by their actual sender until they've left the box. There's a hack in pskb_expand_head() to avoid adjusting skb->truesize for certain skbs, precisely to avoid messing up sk_wmem_alloc accounting. Ideally that hack would cover the ATM use case too, but it doesn't — skbs which aren't owned by any sock, for example PPP control frames, still get their truesize adjusted when the low-level ATM driver adds headroom. This has always been an issue, it seems. The truesize of a packet increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't for normal traffic, only for control frames. So I think we just got away with it, and we probably needed to send 2GiB of LCP echo frames before the misaccounting would ever have caused a problem and caused atm_may_send() to start refusing packets. Commit 14afee4b609 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") did exactly what it was intended to do, and turned this mostly-theoretical problem into a real one, causing PPPoATM to fail immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* starts refusing to allow new packets. The least intrusive solution to this problem is to stash the value of skb->truesize that was accounted to the VCC, in a new member of the ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that value instead of the then-current value of skb->truesize. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: David Woodhouse <dwmw2@infradead.org> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-16 10:55:44 +00:00
atm_account_tx(vcc, skb);
atm: remove an unnecessary loop Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 00:41:36 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
skb->dev = NULL; /* for paths shared with net_device interfaces */
[iov_iter] new primitives - copy_from_iter_full() and friends copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-02 02:09:04 +00:00
if (!copy_from_iter_full(skb_put(skb, size), size, &m->msg_iter)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree_skb(skb);
error = -EFAULT;
goto out;
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (eff != size)
memset(skb->data + size, 0, eff-size);
error = vcc->dev->ops->send(vcc, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
error = error ? error : size;
out:
release_sock(sk);
return error;
}
Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28 16:43:44 +00:00
__poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sock *sk = sock->sk;
Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28 16:43:44 +00:00
struct atm_vcc *vcc;
__poll_t mask;
Revert "net: simplify sock_poll_wait" This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23 11:40:39 +00:00
sock_poll_wait(file, sock, wait);
Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28 16:43:44 +00:00
mask = 0;
vcc = ATM_SD(sock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* exceptional events */
if (sk->sk_err)
vfs: do bulk POLL* -> EPOLL* replacement This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 22:34:03 +00:00
mask = EPOLLERR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (test_bit(ATM_VF_RELEASED, &vcc->flags) ||
test_bit(ATM_VF_CLOSE, &vcc->flags))
vfs: do bulk POLL* -> EPOLL* replacement This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 22:34:03 +00:00
mask |= EPOLLHUP;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* readable? */
if (!skb_queue_empty(&sk->sk_receive_queue))
vfs: do bulk POLL* -> EPOLL* replacement This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 22:34:03 +00:00
mask |= EPOLLIN | EPOLLRDNORM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* writable? */
if (sock->state == SS_CONNECTING &&
test_bit(ATM_VF_WAITING, &vcc->flags))
return mask;
if (vcc->qos.txtp.traffic_class != ATM_NONE &&
vcc_writable(sk))
vfs: do bulk POLL* -> EPOLL* replacement This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 22:34:03 +00:00
mask |= EPOLLOUT | EPOLLWRNORM | EPOLLWRBAND;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return mask;
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
static int atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int error;
/*
* Don't let the QoS change the already connected AAL type nor the
* traffic class.
*/
if (qos->aal != vcc->qos.aal ||
qos->rxtp.traffic_class != vcc->qos.rxtp.traffic_class ||
qos->txtp.traffic_class != vcc->qos.txtp.traffic_class)
return -EINVAL;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = adjust_tp(&qos->txtp, qos->aal);
if (!error)
error = adjust_tp(&qos->rxtp, qos->aal);
if (error)
return error;
if (!vcc->dev->ops->change_qos)
return -EOPNOTSUPP;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (sk_atm(vcc)->sk_family == AF_ATMPVC)
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
return vcc->dev->ops->change_qos(vcc, qos, ATM_MF_SET);
return svc_change_qos(vcc, qos);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 23:20:06 +00:00
static int check_tp(const struct atm_trafprm *tp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
/* @@@ Should be merged with adjust_tp */
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (!tp->traffic_class || tp->traffic_class == ATM_ANYCLASS)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (tp->traffic_class != ATM_UBR && !tp->min_pcr && !tp->pcr &&
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
!tp->max_pcr)
return -EINVAL;
if (tp->min_pcr == ATM_MAX_PCR)
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (tp->min_pcr && tp->max_pcr && tp->max_pcr != ATM_MAX_PCR &&
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
tp->min_pcr > tp->max_pcr)
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* We allow pcr to be outside [min_pcr,max_pcr], because later
* adjustment may still push it in the valid range.
*/
return 0;
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 23:20:06 +00:00
static int check_qos(const struct atm_qos *qos)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int error;
if (!qos->txtp.traffic_class && !qos->rxtp.traffic_class)
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:29 +00:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (qos->txtp.traffic_class != qos->rxtp.traffic_class &&
qos->txtp.traffic_class && qos->rxtp.traffic_class &&
qos->txtp.traffic_class != ATM_ANYCLASS &&
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
qos->rxtp.traffic_class != ATM_ANYCLASS)
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
error = check_tp(&qos->txtp);
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (error)
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return check_tp(&qos->rxtp);
}
int vcc_setsockopt(struct socket *sock, int level, int optname,
net: Make setsockopt() optlen be unsigned. This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30 23:12:20 +00:00
char __user *optval, unsigned int optlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct atm_vcc *vcc;
unsigned long value;
int error;
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
vcc = ATM_SD(sock);
switch (optname) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
case SO_ATMQOS:
{
struct atm_qos qos;
if (copy_from_user(&qos, optval, sizeof(qos)))
return -EFAULT;
error = check_qos(&qos);
if (error)
return error;
if (sock->state == SS_CONNECTED)
return atm_change_qos(vcc, &qos);
if (sock->state != SS_UNCONNECTED)
return -EBADFD;
vcc->qos = qos;
set_bit(ATM_VF_HASQOS, &vcc->flags);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
case SO_SETCLP:
if (get_user(value, (unsigned long __user *)optval))
return -EFAULT;
if (value)
vcc->atm_options |= ATM_ATMOPT_CLP;
else
vcc->atm_options &= ~ATM_ATMOPT_CLP;
return 0;
default:
if (level == SOL_SOCKET)
return -EINVAL;
break;
}
if (!vcc->dev || !vcc->dev->ops->setsockopt)
return -EINVAL;
return vcc->dev->ops->setsockopt(vcc, level, optname, optval, optlen);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
int vcc_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
struct atm_vcc *vcc;
int len;
if (get_user(len, optlen))
return -EFAULT;
if (__SO_LEVEL_MATCH(optname, level) && len != __SO_SIZE(optname))
return -EINVAL;
vcc = ATM_SD(sock);
switch (optname) {
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
case SO_ATMQOS:
if (!test_bit(ATM_VF_HASQOS, &vcc->flags))
return -EINVAL;
return copy_to_user(optval, &vcc->qos, sizeof(vcc->qos))
? -EFAULT : 0;
case SO_SETCLP:
return put_user(vcc->atm_options & ATM_ATMOPT_CLP ? 1 : 0,
(unsigned long __user *)optval) ? -EFAULT : 0;
case SO_ATMPVC:
{
struct sockaddr_atmpvc pvc;
if (!vcc->dev || !test_bit(ATM_VF_ADDR, &vcc->flags))
return -ENOTCONN;
atm: fix info leak in getsockopt(SO_ATMPVC) The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 11:31:44 +00:00
memset(&pvc, 0, sizeof(pvc));
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
pvc.sap_family = AF_ATMPVC;
pvc.sap_addr.itf = vcc->dev->number;
pvc.sap_addr.vpi = vcc->vpi;
pvc.sap_addr.vci = vcc->vci;
return copy_to_user(optval, &pvc, sizeof(pvc)) ? -EFAULT : 0;
}
default:
if (level == SOL_SOCKET)
return -EINVAL;
net/atm: Adjust confusing if indentation Outdent the code following an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-05 10:19:00 +00:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
if (!vcc->dev || !vcc->dev->ops->getsockopt)
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return vcc->dev->ops->getsockopt(vcc, level, optname, optval, len);
}
atm: propagate signal changes via notifier Add notifier chain for changes in atm_dev. Clients like br2684 will call register_atmdevice_notifier() to be notified of changes. Drivers will call atm_dev_signal_change() to notify clients like br2684 of the change. On DSL and ATM devices it's usefull to have a know if you have a carrier signal. netdevice LOWER_UP changes can be propagated to userspace via netlink monitor. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 20:55:30 +00:00
int register_atmdevice_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_register(&atm_dev_notify_chain, nb);
}
EXPORT_SYMBOL_GPL(register_atmdevice_notifier);
void unregister_atmdevice_notifier(struct notifier_block *nb)
{
atomic_notifier_chain_unregister(&atm_dev_notify_chain, nb);
}
EXPORT_SYMBOL_GPL(unregister_atmdevice_notifier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int __init atm_init(void)
{
int error;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = proto_register(&vcc_proto, 0);
if (error < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out;
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = atmpvc_init();
if (error < 0) {
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_err("atmpvc_init() failed with %d\n", error);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out_unregister_vcc_proto;
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = atmsvc_init();
if (error < 0) {
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_err("atmsvc_init() failed with %d\n", error);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out_atmpvc_exit;
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = atm_proc_init();
if (error < 0) {
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_err("atm_proc_init() failed with %d\n", error);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out_atmsvc_exit;
}
net/atm/common.c: checkpatch cleanups Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:06 +00:00
error = atm_sysfs_init();
if (error < 0) {
net/atm: Convert printk to pr_<level> Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 11:40:00 +00:00
pr_err("atm_sysfs_init() failed with %d\n", error);
[ATM]: basic sysfs support for ATM devices Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 19:36:34 +00:00
goto out_atmproc_exit;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
out:
return error;
[ATM]: basic sysfs support for ATM devices Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 19:36:34 +00:00
out_atmproc_exit:
atm_proc_exit();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
out_atmsvc_exit:
atmsvc_exit();
out_atmpvc_exit:
atmsvc_exit();
out_unregister_vcc_proto:
proto_unregister(&vcc_proto);
goto out;
}
static void __exit atm_exit(void)
{
atm_proc_exit();
[ATM]: basic sysfs support for ATM devices Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 19:36:34 +00:00
atm_sysfs_exit();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
atmsvc_exit();
atmpvc_exit();
proto_unregister(&vcc_proto);
}
[ATM]: Fix for crash in adummy_init() This was reported by Ingo Molnar here, http://lkml.org/lkml/2006/12/18/119 The problem is that adummy_init() depends on atm_init() , but adummy_init() is called first. So I put atm_init() into subsys_initcall which seems appropriate, and it will still get module_init() if it becomes a module. Interesting to note that you could crash your system here if you just load the modules in the wrong order. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-06 02:04:06 +00:00
subsys_initcall(atm_init);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
module_exit(atm_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_ATMPVC);
MODULE_ALIAS_NETPROTO(PF_ATMSVC);
Reference in New Issue Copy Permalink