kernel-ark/drivers/rapidio/rio.c

1198 lines
32 KiB
C
Raw Normal View History

/*
* RapidIO interconnect services
* (RapidIO Interconnect Specification, http://www.rapidio.org)
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright 2009 Integrated Device Technology, Inc.
* Alex Bounine <alexandre.bounine@idt.com>
* - Added Port-Write/Error Management initialization and handling
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/rio_regs.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include "rio.h"
static LIST_HEAD(rio_mports);
static unsigned char next_portid;
/**
* rio_local_get_device_id - Get the base/extended device id for a port
* @port: RIO master port from which to get the deviceid
*
* Reads the base/extended device id from the local device
* implementing the master port. Returns the 8/16-bit device
* id.
*/
u16 rio_local_get_device_id(struct rio_mport *port)
{
u32 result;
rio_local_read_config_32(port, RIO_DID_CSR, &result);
return (RIO_GET_DID(port->sys_size, result));
}
/**
* rio_request_inb_mbox - request inbound mailbox service
* @mport: RIO master port from which to allocate the mailbox resource
* @dev_id: Device specific pointer to pass on event
* @mbox: Mailbox number to claim
* @entries: Number of entries in inbound mailbox queue
* @minb: Callback to execute when inbound message is received
*
* Requests ownership of an inbound mailbox resource and binds
* a callback function to the resource. Returns %0 on success.
*/
int rio_request_inb_mbox(struct rio_mport *mport,
void *dev_id,
int mbox,
int entries,
void (*minb) (struct rio_mport * mport, void *dev_id, int mbox,
int slot))
{
int rc = -ENOSYS;
struct resource *res;
if (mport->ops->open_inb_mbox == NULL)
goto out;
res = kmalloc(sizeof(struct resource), GFP_KERNEL);
if (res) {
rio_init_mbox_res(res, mbox, mbox);
/* Make sure this mailbox isn't in use */
if ((rc =
request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE],
res)) < 0) {
kfree(res);
goto out;
}
mport->inb_msg[mbox].res = res;
/* Hook the inbound message callback */
mport->inb_msg[mbox].mcback = minb;
rc = mport->ops->open_inb_mbox(mport, dev_id, mbox, entries);
} else
rc = -ENOMEM;
out:
return rc;
}
/**
* rio_release_inb_mbox - release inbound mailbox message service
* @mport: RIO master port from which to release the mailbox resource
* @mbox: Mailbox number to release
*
* Releases ownership of an inbound mailbox resource. Returns 0
* if the request has been satisfied.
*/
int rio_release_inb_mbox(struct rio_mport *mport, int mbox)
{
if (mport->ops->close_inb_mbox) {
mport->ops->close_inb_mbox(mport, mbox);
/* Release the mailbox resource */
return release_resource(mport->inb_msg[mbox].res);
} else
return -ENOSYS;
}
/**
* rio_request_outb_mbox - request outbound mailbox service
* @mport: RIO master port from which to allocate the mailbox resource
* @dev_id: Device specific pointer to pass on event
* @mbox: Mailbox number to claim
* @entries: Number of entries in outbound mailbox queue
* @moutb: Callback to execute when outbound message is sent
*
* Requests ownership of an outbound mailbox resource and binds
* a callback function to the resource. Returns 0 on success.
*/
int rio_request_outb_mbox(struct rio_mport *mport,
void *dev_id,
int mbox,
int entries,
void (*moutb) (struct rio_mport * mport, void *dev_id, int mbox, int slot))
{
int rc = -ENOSYS;
struct resource *res;
if (mport->ops->open_outb_mbox == NULL)
goto out;
res = kmalloc(sizeof(struct resource), GFP_KERNEL);
if (res) {
rio_init_mbox_res(res, mbox, mbox);
/* Make sure this outbound mailbox isn't in use */
if ((rc =
request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE],
res)) < 0) {
kfree(res);
goto out;
}
mport->outb_msg[mbox].res = res;
/* Hook the inbound message callback */
mport->outb_msg[mbox].mcback = moutb;
rc = mport->ops->open_outb_mbox(mport, dev_id, mbox, entries);
} else
rc = -ENOMEM;
out:
return rc;
}
/**
* rio_release_outb_mbox - release outbound mailbox message service
* @mport: RIO master port from which to release the mailbox resource
* @mbox: Mailbox number to release
*
* Releases ownership of an inbound mailbox resource. Returns 0
* if the request has been satisfied.
*/
int rio_release_outb_mbox(struct rio_mport *mport, int mbox)
{
if (mport->ops->close_outb_mbox) {
mport->ops->close_outb_mbox(mport, mbox);
/* Release the mailbox resource */
return release_resource(mport->outb_msg[mbox].res);
} else
return -ENOSYS;
}
/**
* rio_setup_inb_dbell - bind inbound doorbell callback
* @mport: RIO master port to bind the doorbell callback
* @dev_id: Device specific pointer to pass on event
* @res: Doorbell message resource
* @dinb: Callback to execute when doorbell is received
*
* Adds a doorbell resource/callback pair into a port's
* doorbell event list. Returns 0 if the request has been
* satisfied.
*/
static int
rio_setup_inb_dbell(struct rio_mport *mport, void *dev_id, struct resource *res,
void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, u16 dst,
u16 info))
{
int rc = 0;
struct rio_dbell *dbell;
if (!(dbell = kmalloc(sizeof(struct rio_dbell), GFP_KERNEL))) {
rc = -ENOMEM;
goto out;
}
dbell->res = res;
dbell->dinb = dinb;
dbell->dev_id = dev_id;
list_add_tail(&dbell->node, &mport->dbells);
out:
return rc;
}
/**
* rio_request_inb_dbell - request inbound doorbell message service
* @mport: RIO master port from which to allocate the doorbell resource
* @dev_id: Device specific pointer to pass on event
* @start: Doorbell info range start
* @end: Doorbell info range end
* @dinb: Callback to execute when doorbell is received
*
* Requests ownership of an inbound doorbell resource and binds
* a callback function to the resource. Returns 0 if the request
* has been satisfied.
*/
int rio_request_inb_dbell(struct rio_mport *mport,
void *dev_id,
u16 start,
u16 end,
void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src,
u16 dst, u16 info))
{
int rc = 0;
struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL);
if (res) {
rio_init_dbell_res(res, start, end);
/* Make sure these doorbells aren't in use */
if ((rc =
request_resource(&mport->riores[RIO_DOORBELL_RESOURCE],
res)) < 0) {
kfree(res);
goto out;
}
/* Hook the doorbell callback */
rc = rio_setup_inb_dbell(mport, dev_id, res, dinb);
} else
rc = -ENOMEM;
out:
return rc;
}
/**
* rio_release_inb_dbell - release inbound doorbell message service
* @mport: RIO master port from which to release the doorbell resource
* @start: Doorbell info range start
* @end: Doorbell info range end
*
* Releases ownership of an inbound doorbell resource and removes
* callback from the doorbell event list. Returns 0 if the request
* has been satisfied.
*/
int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end)
{
int rc = 0, found = 0;
struct rio_dbell *dbell;
list_for_each_entry(dbell, &mport->dbells, node) {
if ((dbell->res->start == start) && (dbell->res->end == end)) {
found = 1;
break;
}
}
/* If we can't find an exact match, fail */
if (!found) {
rc = -EINVAL;
goto out;
}
/* Delete from list */
list_del(&dbell->node);
/* Release the doorbell resource */
rc = release_resource(dbell->res);
/* Free the doorbell event */
kfree(dbell);
out:
return rc;
}
/**
* rio_request_outb_dbell - request outbound doorbell message range
* @rdev: RIO device from which to allocate the doorbell resource
* @start: Doorbell message range start
* @end: Doorbell message range end
*
* Requests ownership of a doorbell message range. Returns a resource
* if the request has been satisfied or %NULL on failure.
*/
struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start,
u16 end)
{
struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL);
if (res) {
rio_init_dbell_res(res, start, end);
/* Make sure these doorbells aren't in use */
if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res)
< 0) {
kfree(res);
res = NULL;
}
}
return res;
}
/**
* rio_release_outb_dbell - release outbound doorbell message range
* @rdev: RIO device from which to release the doorbell resource
* @res: Doorbell resource to be freed
*
* Releases ownership of a doorbell message range. Returns 0 if the
* request has been satisfied.
*/
int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
{
int rc = release_resource(res);
kfree(res);
return rc;
}
/**
* rio_request_inb_pwrite - request inbound port-write message service
rapidio: fix new kernel-doc warnings Fix a bunch of new rapidio kernel-doc warnings: Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag' Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'pwcback' Warning(include/linux/rio.h:247): No description found for parameter 'set_domain' Warning(include/linux/rio.h:247): No description found for parameter 'get_domain' Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev' Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em' Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev' Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount' Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb' Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-28 22:08:08 +00:00
* @rdev: RIO device to which register inbound port-write callback routine
* @pwcback: Callback routine to execute when port-write is received
*
* Binds a port-write callback function to the RapidIO device.
* Returns 0 if the request has been satisfied.
*/
int rio_request_inb_pwrite(struct rio_dev *rdev,
int (*pwcback)(struct rio_dev *rdev, union rio_pw_msg *msg, int step))
{
int rc = 0;
spin_lock(&rio_global_list_lock);
if (rdev->pwcback != NULL)
rc = -ENOMEM;
else
rdev->pwcback = pwcback;
spin_unlock(&rio_global_list_lock);
return rc;
}
EXPORT_SYMBOL_GPL(rio_request_inb_pwrite);
/**
* rio_release_inb_pwrite - release inbound port-write message service
* @rdev: RIO device which registered for inbound port-write callback
*
* Removes callback from the rio_dev structure. Returns 0 if the request
* has been satisfied.
*/
int rio_release_inb_pwrite(struct rio_dev *rdev)
{
int rc = -ENOMEM;
spin_lock(&rio_global_list_lock);
if (rdev->pwcback) {
rdev->pwcback = NULL;
rc = 0;
}
spin_unlock(&rio_global_list_lock);
return rc;
}
EXPORT_SYMBOL_GPL(rio_release_inb_pwrite);
/**
* rio_mport_get_physefb - Helper function that returns register offset
* for Physical Layer Extended Features Block.
rapidio: fix new kernel-doc warnings Fix a bunch of new rapidio kernel-doc warnings: Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag' Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'pwcback' Warning(include/linux/rio.h:247): No description found for parameter 'set_domain' Warning(include/linux/rio.h:247): No description found for parameter 'get_domain' Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev' Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em' Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev' Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount' Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb' Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-28 22:08:08 +00:00
* @port: Master port to issue transaction
* @local: Indicate a local master port or remote device access
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
*/
u32
rio_mport_get_physefb(struct rio_mport *port, int local,
u16 destid, u8 hopcount)
{
u32 ext_ftr_ptr;
u32 ftr_header;
ext_ftr_ptr = rio_mport_get_efb(port, local, destid, hopcount, 0);
while (ext_ftr_ptr) {
if (local)
rio_local_read_config_32(port, ext_ftr_ptr,
&ftr_header);
else
rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr, &ftr_header);
ftr_header = RIO_GET_BLOCK_ID(ftr_header);
switch (ftr_header) {
case RIO_EFB_SER_EP_ID_V13P:
case RIO_EFB_SER_EP_REC_ID_V13P:
case RIO_EFB_SER_EP_FREE_ID_V13P:
case RIO_EFB_SER_EP_ID:
case RIO_EFB_SER_EP_REC_ID:
case RIO_EFB_SER_EP_FREE_ID:
case RIO_EFB_SER_EP_FREC_ID:
return ext_ftr_ptr;
default:
break;
}
ext_ftr_ptr = rio_mport_get_efb(port, local, destid,
hopcount, ext_ftr_ptr);
}
return ext_ftr_ptr;
}
/**
* rio_get_comptag - Begin or continue searching for a RIO device by component tag
rapidio: fix new kernel-doc warnings Fix a bunch of new rapidio kernel-doc warnings: Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag' Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'pwcback' Warning(include/linux/rio.h:247): No description found for parameter 'set_domain' Warning(include/linux/rio.h:247): No description found for parameter 'get_domain' Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev' Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em' Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev' Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount' Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb' Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-28 22:08:08 +00:00
* @comp_tag: RIO component tag to match
* @from: Previous RIO device found in search, or %NULL for new search
*
* Iterates through the list of known RIO devices. If a RIO device is
* found with a matching @comp_tag, a pointer to its device
* structure is returned. Otherwise, %NULL is returned. A new search
* is initiated by passing %NULL to the @from argument. Otherwise, if
* @from is not %NULL, searches continue from next device on the global
* list.
*/
struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from)
{
struct list_head *n;
struct rio_dev *rdev;
spin_lock(&rio_global_list_lock);
n = from ? from->global_list.next : rio_devices.next;
while (n && (n != &rio_devices)) {
rdev = rio_dev_g(n);
if (rdev->comp_tag == comp_tag)
goto exit;
n = n->next;
}
rdev = NULL;
exit:
spin_unlock(&rio_global_list_lock);
return rdev;
}
/**
* rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
* @rdev: Pointer to RIO device control structure
* @pnum: Switch port number to set LOCKOUT bit
* @lock: Operation : set (=1) or clear (=0)
*/
int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
{
u32 regval;
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
&regval);
if (lock)
regval |= RIO_PORT_N_CTL_LOCKOUT;
else
regval &= ~RIO_PORT_N_CTL_LOCKOUT;
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
regval);
return 0;
}
/**
* rio_chk_dev_route - Validate route to the specified device.
* @rdev: RIO device failed to respond
* @nrdev: Last active device on the route to rdev
* @npnum: nrdev's port number on the route to rdev
*
* Follows a route to the specified RIO device to determine the last available
* device (and corresponding RIO port) on the route.
*/
static int
rio_chk_dev_route(struct rio_dev *rdev, struct rio_dev **nrdev, int *npnum)
{
u32 result;
int p_port, rc = -EIO;
struct rio_dev *prev = NULL;
/* Find switch with failed RIO link */
while (rdev->prev && (rdev->prev->pef & RIO_PEF_SWITCH)) {
if (!rio_read_config_32(rdev->prev, RIO_DEV_ID_CAR, &result)) {
prev = rdev->prev;
break;
}
rdev = rdev->prev;
}
if (prev == NULL)
goto err_out;
p_port = prev->rswitch->route_table[rdev->destid];
if (p_port != RIO_INVALID_ROUTE) {
pr_debug("RIO: link failed on [%s]-P%d\n",
rio_name(prev), p_port);
*nrdev = prev;
*npnum = p_port;
rc = 0;
} else
pr_debug("RIO: failed to trace route to %s\n", rio_name(rdev));
err_out:
return rc;
}
/**
* rio_mport_chk_dev_access - Validate access to the specified device.
* @mport: Master port to send transactions
* @destid: Device destination ID in network
* @hopcount: Number of hops into the network
*/
int
rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount)
{
int i = 0;
u32 tmp;
while (rio_mport_read_config_32(mport, destid, hopcount,
RIO_DEV_ID_CAR, &tmp)) {
i++;
if (i == RIO_MAX_CHK_RETRY)
return -EIO;
mdelay(1);
}
return 0;
}
/**
* rio_chk_dev_access - Validate access to the specified device.
* @rdev: Pointer to RIO device control structure
*/
static int rio_chk_dev_access(struct rio_dev *rdev)
{
return rio_mport_chk_dev_access(rdev->net->hport,
rdev->destid, rdev->hopcount);
}
/**
* rio_get_input_status - Sends a Link-Request/Input-Status control symbol and
* returns link-response (if requested).
* @rdev: RIO devive to issue Input-status command
* @pnum: Device port number to issue the command
* @lnkresp: Response from a link partner
*/
static int
rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
{
u32 regval;
int checkcount;
if (lnkresp) {
/* Read from link maintenance response register
* to clear valid bit */
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
&regval);
udelay(50);
}
/* Issue Input-status command */
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum),
RIO_MNT_REQ_CMD_IS);
/* Exit if the response is not expected */
if (lnkresp == NULL)
return 0;
checkcount = 3;
while (checkcount--) {
udelay(50);
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
&regval);
if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
*lnkresp = regval;
return 0;
}
}
return -EIO;
}
/**
* rio_clr_err_stopped - Clears port Error-stopped states.
* @rdev: Pointer to RIO device control structure
* @pnum: Switch port number to clear errors
* @err_status: port error status (if 0 reads register from device)
*/
static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
{
struct rio_dev *nextdev = rdev->rswitch->nextdev[pnum];
u32 regval;
u32 far_ackid, far_linkstat, near_ackid;
if (err_status == 0)
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
&err_status);
if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) {
pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
/*
* Send a Link-Request/Input-Status control symbol
*/
if (rio_get_input_status(rdev, pnum, &regval)) {
pr_debug("RIO_EM: Input-status response timeout\n");
goto rd_err;
}
pr_debug("RIO_EM: SP%d Input-status response=0x%08x\n",
pnum, regval);
far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
&regval);
pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
pr_debug("RIO_EM: SP%d far_ackID=0x%02x far_linkstat=0x%02x" \
" near_ackID=0x%02x\n",
pnum, far_ackid, far_linkstat, near_ackid);
/*
* If required, synchronize ackIDs of near and
* far sides.
*/
if ((far_ackid != ((regval & RIO_PORT_N_ACK_OUTSTAND) >> 8)) ||
(far_ackid != (regval & RIO_PORT_N_ACK_OUTBOUND))) {
/* Align near outstanding/outbound ackIDs with
* far inbound.
*/
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
(near_ackid << 24) |
(far_ackid << 8) | far_ackid);
/* Align far outstanding/outbound ackIDs with
* near inbound.
*/
far_ackid++;
if (nextdev)
rio_write_config_32(nextdev,
nextdev->phys_efptr +
RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)),
(far_ackid << 24) |
(near_ackid << 8) | near_ackid);
else
pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n");
}
rd_err:
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
&err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
}
if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) {
pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
rio_get_input_status(nextdev,
RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
udelay(50);
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
&err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
}
return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0;
}
/**
* rio_inb_pwrite_handler - process inbound port-write message
* @pw_msg: pointer to inbound port-write message
*
* Processes an inbound port-write message. Returns 0 if the request
* has been satisfied.
*/
int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg)
{
struct rio_dev *rdev;
u32 err_status, em_perrdet, em_ltlerrdet;
int rc, portnum;
rdev = rio_get_comptag((pw_msg->em.comptag & RIO_CTAG_UDEVID), NULL);
if (rdev == NULL) {
/* Device removed or enumeration error */
pr_debug("RIO: %s No matching device for CTag 0x%08x\n",
__func__, pw_msg->em.comptag);
return -EIO;
}
pr_debug("RIO: Port-Write message from %s\n", rio_name(rdev));
#ifdef DEBUG_PW
{
u32 i;
for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32);) {
pr_debug("0x%02x: %08x %08x %08x %08x\n",
i*4, pw_msg->raw[i], pw_msg->raw[i + 1],
pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
i += 4;
}
}
#endif
/* Call an external service function (if such is registered
* for this device). This may be the service for endpoints that send
* device-specific port-write messages. End-point messages expected
* to be handled completely by EP specific device driver.
* For switches rc==0 signals that no standard processing required.
*/
if (rdev->pwcback != NULL) {
rc = rdev->pwcback(rdev, pw_msg, 0);
if (rc == 0)
return 0;
}
portnum = pw_msg->em.is_port & 0xFF;
/* Check if device and route to it are functional:
* Sometimes devices may send PW message(s) just before being
* powered down (or link being lost).
*/
if (rio_chk_dev_access(rdev)) {
pr_debug("RIO: device access failed - get link partner\n");
/* Scan route to the device and identify failed link.
* This will replace device and port reported in PW message.
* PW message should not be used after this point.
*/
if (rio_chk_dev_route(rdev, &rdev, &portnum)) {
pr_err("RIO: Route trace for %s failed\n",
rio_name(rdev));
return -EIO;
}
pw_msg = NULL;
}
/* For End-point devices processing stops here */
if (!(rdev->pef & RIO_PEF_SWITCH))
return 0;
if (rdev->phys_efptr == 0) {
pr_err("RIO_PW: Bad switch initialization for %s\n",
rio_name(rdev));
return 0;
}
/*
* Process the port-write notification from switch
*/
if (rdev->rswitch->em_handle)
rdev->rswitch->em_handle(rdev, portnum);
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
&err_status);
pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
if (!(rdev->rswitch->port_ok & (1 << portnum))) {
rdev->rswitch->port_ok |= (1 << portnum);
rio_set_port_lockout(rdev, portnum, 0);
/* Schedule Insertion Service */
pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
rio_name(rdev), portnum);
}
/* Clear error-stopped states (if reported).
* Depending on the link partner state, two attempts
* may be needed for successful recovery.
*/
if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
RIO_PORT_N_ERR_STS_PW_INP_ES)) {
if (rio_clr_err_stopped(rdev, portnum, err_status))
rio_clr_err_stopped(rdev, portnum, 0);
}
} else { /* if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) */
if (rdev->rswitch->port_ok & (1 << portnum)) {
rdev->rswitch->port_ok &= ~(1 << portnum);
rio_set_port_lockout(rdev, portnum, 1);
rio_write_config_32(rdev,
rdev->phys_efptr +
RIO_PORT_N_ACK_STS_CSR(portnum),
RIO_PORT_N_ACK_CLEAR);
/* Schedule Extraction Service */
pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
rio_name(rdev), portnum);
}
}
rio_read_config_32(rdev,
rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
if (em_perrdet) {
pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
portnum, em_perrdet);
/* Clear EM Port N Error Detect CSR */
rio_write_config_32(rdev,
rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
}
rio_read_config_32(rdev,
rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
if (em_ltlerrdet) {
pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
em_ltlerrdet);
/* Clear EM L/T Layer Error Detect CSR */
rio_write_config_32(rdev,
rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
}
/* Clear remaining error bits and Port-Write Pending bit */
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
err_status);
return 0;
}
EXPORT_SYMBOL_GPL(rio_inb_pwrite_handler);
/**
* rio_mport_get_efb - get pointer to next extended features block
* @port: Master port to issue transaction
* @local: Indicate a local master port or remote device access
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
* @from: Offset of current Extended Feature block header (if 0 starts
* from ExtFeaturePtr)
*/
u32
rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
u8 hopcount, u32 from)
{
u32 reg_val;
if (from == 0) {
if (local)
rio_local_read_config_32(port, RIO_ASM_INFO_CAR,
&reg_val);
else
rio_mport_read_config_32(port, destid, hopcount,
RIO_ASM_INFO_CAR, &reg_val);
return reg_val & RIO_EXT_FTR_PTR_MASK;
} else {
if (local)
rio_local_read_config_32(port, from, &reg_val);
else
rio_mport_read_config_32(port, destid, hopcount,
from, &reg_val);
return RIO_GET_BLOCK_ID(reg_val);
}
}
/**
* rio_mport_get_feature - query for devices' extended features
* @port: Master port to issue transaction
* @local: Indicate a local master port or remote device access
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
* @ftr: Extended feature code
*
* Tell if a device supports a given RapidIO capability.
* Returns the offset of the requested extended feature
* block within the device's RIO configuration space or
* 0 in case the device does not support it. Possible
* values for @ftr:
*
* %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices
*
* %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices
*
* %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices
*
* %RIO_EFB_SER_EP_ID LP/Serial EP Devices
*
* %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices
*
* %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices
*/
u32
rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
u8 hopcount, int ftr)
{
u32 asm_info, ext_ftr_ptr, ftr_header;
if (local)
rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info);
else
rio_mport_read_config_32(port, destid, hopcount,
RIO_ASM_INFO_CAR, &asm_info);
ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK;
while (ext_ftr_ptr) {
if (local)
rio_local_read_config_32(port, ext_ftr_ptr,
&ftr_header);
else
rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr, &ftr_header);
if (RIO_GET_BLOCK_ID(ftr_header) == ftr)
return ext_ftr_ptr;
if (!(ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header)))
break;
}
return 0;
}
/**
* rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
* @vid: RIO vid to match or %RIO_ANY_ID to match all vids
* @did: RIO did to match or %RIO_ANY_ID to match all dids
* @asm_vid: RIO asm_vid to match or %RIO_ANY_ID to match all asm_vids
* @asm_did: RIO asm_did to match or %RIO_ANY_ID to match all asm_dids
* @from: Previous RIO device found in search, or %NULL for new search
*
* Iterates through the list of known RIO devices. If a RIO device is
* found with a matching @vid, @did, @asm_vid, @asm_did, the reference
* count to the device is incrememted and a pointer to its device
* structure is returned. Otherwise, %NULL is returned. A new search
* is initiated by passing %NULL to the @from argument. Otherwise, if
* @from is not %NULL, searches continue from next device on the global
* list. The reference count for @from is always decremented if it is
* not %NULL.
*/
struct rio_dev *rio_get_asm(u16 vid, u16 did,
u16 asm_vid, u16 asm_did, struct rio_dev *from)
{
struct list_head *n;
struct rio_dev *rdev;
WARN_ON(in_interrupt());
spin_lock(&rio_global_list_lock);
n = from ? from->global_list.next : rio_devices.next;
while (n && (n != &rio_devices)) {
rdev = rio_dev_g(n);
if ((vid == RIO_ANY_ID || rdev->vid == vid) &&
(did == RIO_ANY_ID || rdev->did == did) &&
(asm_vid == RIO_ANY_ID || rdev->asm_vid == asm_vid) &&
(asm_did == RIO_ANY_ID || rdev->asm_did == asm_did))
goto exit;
n = n->next;
}
rdev = NULL;
exit:
rio_dev_put(from);
rdev = rio_dev_get(rdev);
spin_unlock(&rio_global_list_lock);
return rdev;
}
/**
* rio_get_device - Begin or continue searching for a RIO device by vid/did
* @vid: RIO vid to match or %RIO_ANY_ID to match all vids
* @did: RIO did to match or %RIO_ANY_ID to match all dids
* @from: Previous RIO device found in search, or %NULL for new search
*
* Iterates through the list of known RIO devices. If a RIO device is
* found with a matching @vid and @did, the reference count to the
* device is incrememted and a pointer to its device structure is returned.
* Otherwise, %NULL is returned. A new search is initiated by passing %NULL
* to the @from argument. Otherwise, if @from is not %NULL, searches
* continue from next device on the global list. The reference count for
* @from is always decremented if it is not %NULL.
*/
struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from)
{
return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from);
}
/**
* rio_std_route_add_entry - Add switch route table entry using standard
* registers defined in RIO specification rev.1.3
* @mport: Master port to issue transaction
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
* @table: routing table ID (global or port-specific)
* @route_destid: destID entry in the RT
* @route_port: destination port for specified destID
*/
int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port)
{
if (table == RIO_GLOBAL_TABLE) {
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR,
(u32)route_destid);
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_PORT_SEL_CSR,
(u32)route_port);
}
udelay(10);
return 0;
}
/**
* rio_std_route_get_entry - Read switch route table entry (port number)
* associated with specified destID using standard registers defined in RIO
* specification rev.1.3
* @mport: Master port to issue transaction
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
* @table: routing table ID (global or port-specific)
* @route_destid: destID entry in the RT
* @route_port: returned destination port for specified destID
*/
int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 *route_port)
{
u32 result;
if (table == RIO_GLOBAL_TABLE) {
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
rio_mport_read_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
*route_port = (u8)result;
}
return 0;
}
/**
* rio_std_route_clr_table - Clear swotch route table using standard registers
* defined in RIO specification rev.1.3.
* @mport: Master port to issue transaction
* @destid: Destination ID of the device
* @hopcount: Number of switch hops to the device
* @table: routing table ID (global or port-specific)
*/
int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table)
{
u32 max_destid = 0xff;
u32 i, pef, id_inc = 1, ext_cfg = 0;
u32 port_sel = RIO_INVALID_ROUTE;
if (table == RIO_GLOBAL_TABLE) {
rio_mport_read_config_32(mport, destid, hopcount,
RIO_PEF_CAR, &pef);
if (mport->sys_size) {
rio_mport_read_config_32(mport, destid, hopcount,
RIO_SWITCH_RT_LIMIT,
&max_destid);
max_destid &= RIO_RT_MAX_DESTID;
}
if (pef & RIO_PEF_EXT_RT) {
ext_cfg = 0x80000000;
id_inc = 4;
port_sel = (RIO_INVALID_ROUTE << 24) |
(RIO_INVALID_ROUTE << 16) |
(RIO_INVALID_ROUTE << 8) |
RIO_INVALID_ROUTE;
}
for (i = 0; i <= max_destid;) {
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR,
ext_cfg | i);
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_PORT_SEL_CSR,
port_sel);
i += id_inc;
}
}
udelay(10);
return 0;
}
static void rio_fixup_device(struct rio_dev *dev)
{
}
static int __devinit rio_init(void)
{
struct rio_dev *dev = NULL;
while ((dev = rio_get_device(RIO_ANY_ID, RIO_ANY_ID, dev)) != NULL) {
rio_fixup_device(dev);
}
return 0;
}
int __devinit rio_init_mports(void)
{
struct rio_mport *port;
list_for_each_entry(port, &rio_mports, node) {
if (port->host_deviceid >= 0)
rio_enum_mport(port);
else
rio_disc_mport(port);
}
rio_init();
return 0;
}
device_initcall_sync(rio_init_mports);
static int hdids[RIO_MAX_MPORTS + 1];
static int rio_get_hdid(int index)
{
if (!hdids[0] || hdids[0] <= index || index >= RIO_MAX_MPORTS)
return -1;
return hdids[index + 1];
}
static int rio_hdid_setup(char *str)
{
(void)get_options(str, ARRAY_SIZE(hdids), hdids);
return 1;
}
__setup("riohdid=", rio_hdid_setup);
int rio_register_mport(struct rio_mport *port)
{
if (next_portid >= RIO_MAX_MPORTS) {
pr_err("RIO: reached specified max number of mports\n");
return 1;
}
port->id = next_portid++;
port->host_deviceid = rio_get_hdid(port->id);
list_add_tail(&port->node, &rio_mports);
return 0;
}
EXPORT_SYMBOL_GPL(rio_local_get_device_id);
EXPORT_SYMBOL_GPL(rio_get_device);
EXPORT_SYMBOL_GPL(rio_get_asm);
EXPORT_SYMBOL_GPL(rio_request_inb_dbell);
EXPORT_SYMBOL_GPL(rio_release_inb_dbell);
EXPORT_SYMBOL_GPL(rio_request_outb_dbell);
EXPORT_SYMBOL_GPL(rio_release_outb_dbell);
EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
EXPORT_SYMBOL_GPL(rio_release_outb_mbox);