davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
baaa15ff80
kernel-ark/drivers/char/toshiba.c

547 lines
13 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* toshiba.c -- Linux driver for accessing the SMM on Toshiba laptops
*
* Copyright (c) 1996-2001 Jonathan A. Buzzard (jonathan@buzzard.org.uk)
*
* Valuable assistance and patches from:
* Tom May <tom@you-bastards.com>
* Rob Napier <rnapier@employees.org>
*
* Fn status port numbers for machine ID's courtesy of
* 0xfc02: Scott Eisert <scott.e@sky-eye.com>
* 0xfc04: Steve VanDevender <stevev@efn.org>
* 0xfc08: Garth Berry <garth@itsbruce.net>
* 0xfc0a: Egbert Eich <eich@xfree86.org>
* 0xfc10: Andrew Lofthouse <Andrew.Lofthouse@robins.af.mil>
* 0xfc11: Spencer Olson <solson@novell.com>
* 0xfc13: Claudius Frankewitz <kryp@gmx.de>
* 0xfc15: Tom May <tom@you-bastards.com>
* 0xfc17: Dave Konrad <konrad@xenia.it>
* 0xfc1a: George Betzos <betzos@engr.colostate.edu>
* 0xfc1b: Munemasa Wada <munemasa@jnovel.co.jp>
* 0xfc1d: Arthur Liu <armie@slap.mine.nu>
* 0xfc5a: Jacques L'helgoualc'h <lhh@free.fr>
* 0xfcd1: Mr. Dave Konrad <konrad@xenia.it>
*
* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
*
* This code is covered by the GNU GPL and you are free to make any
* changes you wish to it under the terms of the license. However the
* code has the potential to render your computer and/or someone else's
* unusable. Please proceed with care when modifying the code.
*
* Note: Unfortunately the laptop hardware can close the System Configuration
* Interface on it's own accord. It is therefore necessary for *all*
* programs using this driver to be aware that *any* SCI call can fail at
* *any* time. It is up to any program to be aware of this eventuality
* and take appropriate steps.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* The information used to write this driver has been obtained by reverse
* engineering the software supplied by Toshiba for their portable computers in
* strict accordance with the European Council Directive 92/250/EEC on the legal
* protection of computer programs, and it's implementation into English Law by
* the Copyright (Computer Programs) Regulations 1992 (S.I. 1992 No.3233).
*
*/
#define TOSH_VERSION "1.11 26/9/2001"
#define TOSH_DEBUG 0
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/miscdevice.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/init.h>
#include <linux/stat.h>
#include <linux/proc_fs.h>
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
#include <linux/seq_file.h>
drivers: autoconvert trivial BKL users to private mutex All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 12:28:52 +00:00
#include <linux/mutex.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/toshiba.h>
#define TOSH_MINOR_DEV 181
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
MODULE_DESCRIPTION("Toshiba laptop SMM driver");
MODULE_SUPPORTED_DEVICE("toshiba");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
drivers: autoconvert trivial BKL users to private mutex All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 12:28:52 +00:00
static DEFINE_MUTEX(tosh_mutex);
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
static int tosh_fn;
module_param_named(fn, tosh_fn, int, 0);
MODULE_PARM_DESC(fn, "User specified Fn key detection port");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
static int tosh_id;
static int tosh_bios;
static int tosh_date;
static int tosh_sci;
static int tosh_fan;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tosh: Use non bkl ioctl We wrap the smm calls and other bits with the BKL push down as a precaution but they can probably go Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-04 16:19:55 +00:00
static long tosh_ioctl(struct file *, unsigned int,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long);
[PATCH] make more file_operation structs static Mark the static struct file_operations in drivers/char as const. Making them const prevents accidental bugs, and moves them to the .rodata section so that they no longer do any false sharing; in addition with the proper debug option they are then protected against corruption.. [akpm@osdl.org: build fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:21 +00:00
static const struct file_operations tosh_fops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.owner = THIS_MODULE,
tosh: Use non bkl ioctl We wrap the smm calls and other bits with the BKL push down as a precaution but they can probably go Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-04 16:19:55 +00:00
.unlocked_ioctl = tosh_ioctl,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.llseek = noop_llseek,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
static struct miscdevice tosh_device = {
TOSH_MINOR_DEV,
"toshiba",
&tosh_fops
};
/*
* Read the Fn key status
*/
#ifdef CONFIG_PROC_FS
static int tosh_fn_status(void)
{
unsigned char scan;
unsigned long flags;
if (tosh_fn!=0) {
scan = inb(tosh_fn);
} else {
local_irq_save(flags);
outb(0x8e, 0xe4);
scan = inb(0xe5);
local_irq_restore(flags);
}
return (int) scan;
}
#endif
/*
* For the Portage 610CT and the Tecra 700CS/700CDT emulate the HCI fan function
*/
static int tosh_emulate_fan(SMMRegisters *regs)
{
unsigned long eax,ecx,flags;
unsigned char al;
eax = regs->eax & 0xff00;
ecx = regs->ecx & 0xffff;
/* Portage 610CT */
if (tosh_id==0xfccb) {
if (eax==0xfe00) {
/* fan status */
local_irq_save(flags);
outb(0xbe, 0xe4);
al = inb(0xe5);
local_irq_restore(flags);
regs->eax = 0x00;
regs->ecx = (unsigned int) (al & 0x01);
}
if ((eax==0xff00) && (ecx==0x0000)) {
/* fan off */
local_irq_save(flags);
outb(0xbe, 0xe4);
al = inb(0xe5);
outb(0xbe, 0xe4);
outb (al | 0x01, 0xe5);
local_irq_restore(flags);
regs->eax = 0x00;
regs->ecx = 0x00;
}
if ((eax==0xff00) && (ecx==0x0001)) {
/* fan on */
local_irq_save(flags);
outb(0xbe, 0xe4);
al = inb(0xe5);
outb(0xbe, 0xe4);
outb(al & 0xfe, 0xe5);
local_irq_restore(flags);
regs->eax = 0x00;
regs->ecx = 0x01;
}
}
/* Tecra 700CS/CDT */
if (tosh_id==0xfccc) {
if (eax==0xfe00) {
/* fan status */
local_irq_save(flags);
outb(0xe0, 0xe4);
al = inb(0xe5);
local_irq_restore(flags);
regs->eax = 0x00;
regs->ecx = al & 0x01;
}
if ((eax==0xff00) && (ecx==0x0000)) {
/* fan off */
local_irq_save(flags);
outb(0xe0, 0xe4);
al = inb(0xe5);
outw(0xe0 | ((al & 0xfe) << 8), 0xe4);
local_irq_restore(flags);
regs->eax = 0x00;
regs->ecx = 0x00;
}
if ((eax==0xff00) && (ecx==0x0001)) {
/* fan on */
local_irq_save(flags);
outb(0xe0, 0xe4);
al = inb(0xe5);
outw(0xe0 | ((al | 0x01) << 8), 0xe4);
local_irq_restore(flags);
regs->eax = 0x00;
regs->ecx = 0x01;
}
}
return 0;
}
/*
* Put the laptop into System Management Mode
*/
int tosh_smm(SMMRegisters *regs)
{
int eax;
asm ("# load the values into the registers\n\t" \
"pushl %%eax\n\t" \
"movl 0(%%eax),%%edx\n\t" \
"push %%edx\n\t" \
"movl 4(%%eax),%%ebx\n\t" \
"movl 8(%%eax),%%ecx\n\t" \
"movl 12(%%eax),%%edx\n\t" \
"movl 16(%%eax),%%esi\n\t" \
"movl 20(%%eax),%%edi\n\t" \
"popl %%eax\n\t" \
"# call the System Management mode\n\t" \
"inb $0xb2,%%al\n\t"
"# fill out the memory with the values in the registers\n\t" \
"xchgl %%eax,(%%esp)\n\t"
"movl %%ebx,4(%%eax)\n\t" \
"movl %%ecx,8(%%eax)\n\t" \
"movl %%edx,12(%%eax)\n\t" \
"movl %%esi,16(%%eax)\n\t" \
"movl %%edi,20(%%eax)\n\t" \
"popl %%edx\n\t" \
"movl %%edx,0(%%eax)\n\t" \
"# setup the return value to the carry flag\n\t" \
"lahf\n\t" \
"shrl $8,%%eax\n\t" \
"andl $1,%%eax\n" \
: "=a" (eax)
: "a" (regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
return eax;
}
[PATCH] export toshiba SMM support for neofb module When CONFIG_TOSHIBA=y and CONFIG_FB_NEOMAGIC=m, tosh_smm() needs to be exported for neofb to use it. WARNING: "tosh_smm" [drivers/video/neofb.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:38:41 +00:00
EXPORT_SYMBOL(tosh_smm);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tosh: Use non bkl ioctl We wrap the smm calls and other bits with the BKL push down as a precaution but they can probably go Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-04 16:19:55 +00:00
static long tosh_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
SMMRegisters regs;
SMMRegisters __user *argp = (SMMRegisters __user *)arg;
unsigned short ax,bx;
int err;
if (!argp)
return -EINVAL;
if (copy_from_user(&regs, argp, sizeof(SMMRegisters)))
return -EFAULT;
switch (cmd) {
case TOSH_SMM:
ax = regs.eax & 0xff00;
bx = regs.ebx & 0xffff;
/* block HCI calls to read/write memory & PCI devices */
if (((ax==0xff00) || (ax==0xfe00)) && (bx>0x0069))
return -EINVAL;
/* do we need to emulate the fan ? */
drivers: autoconvert trivial BKL users to private mutex All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 12:28:52 +00:00
mutex_lock(&tosh_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (tosh_fan==1) {
if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) {
err = tosh_emulate_fan(&regs);
drivers: autoconvert trivial BKL users to private mutex All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 12:28:52 +00:00
mutex_unlock(&tosh_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
}
}
err = tosh_smm(&regs);
drivers: autoconvert trivial BKL users to private mutex All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 12:28:52 +00:00
mutex_unlock(&tosh_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
default:
return -EINVAL;
}
if (copy_to_user(argp, &regs, sizeof(SMMRegisters)))
return -EFAULT;
return (err==0) ? 0:-EINVAL;
}
/*
* Print the information for /proc/toshiba
*/
#ifdef CONFIG_PROC_FS
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
static int proc_toshiba_show(struct seq_file *m, void *v)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int key;
key = tosh_fn_status();
/* Arguments
0) Linux driver version (this will change if format changes)
1) Machine ID
2) SCI version
3) BIOS version (major, minor)
4) BIOS date (in SCI date format)
5) Fn Key status
*/
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
seq_printf(m, "1.1 0x%04x %d.%d %d.%d 0x%04x 0x%02x\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tosh_id,
(tosh_sci & 0xff00)>>8,
tosh_sci & 0xff,
(tosh_bios & 0xff00)>>8,
tosh_bios & 0xff,
tosh_date,
key);
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
static int proc_toshiba_open(struct inode *inode, struct file *file)
{
return single_open(file, proc_toshiba_show, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
static const struct file_operations proc_toshiba_fops = {
.owner = THIS_MODULE,
.open = proc_toshiba_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
/*
* Determine which port to use for the Fn key status
*/
static void tosh_set_fn_port(void)
{
switch (tosh_id) {
case 0xfc02: case 0xfc04: case 0xfc09: case 0xfc0a: case 0xfc10:
case 0xfc11: case 0xfc13: case 0xfc15: case 0xfc1a: case 0xfc1b:
case 0xfc5a:
tosh_fn = 0x62;
break;
case 0xfc08: case 0xfc17: case 0xfc1d: case 0xfcd1: case 0xfce0:
case 0xfce2:
tosh_fn = 0x68;
break;
default:
tosh_fn = 0x00;
break;
}
return;
}
/*
* Get the machine identification number of the current model
*/
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
static int tosh_get_machine_id(void __iomem *bios)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int id;
SMMRegisters regs;
unsigned short bx,cx;
unsigned long address;
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
id = (0x100*(int) readb(bios+0xfffe))+((int) readb(bios+0xfffa));
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* do we have a SCTTable machine identication number on our hands */
if (id==0xfc2f) {
/* start by getting a pointer into the BIOS */
regs.eax = 0xc000;
regs.ebx = 0x0000;
regs.ecx = 0x0000;
tosh_smm(&regs);
bx = (unsigned short) (regs.ebx & 0xffff);
/* At this point in the Toshiba routines under MS Windows
the bx register holds 0xe6f5. However my code is producing
a different value! For the time being I will just fudge the
value. This has been verified on a Satellite Pro 430CDT,
Tecra 750CDT, Tecra 780DVD and Satellite 310CDT. */
#if TOSH_DEBUG
printk("toshiba: debugging ID ebx=0x%04x\n", regs.ebx);
#endif
bx = 0xe6f5;
/* now twiddle with our pointer a bit */
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
address = bx;
cx = readw(bios + address);
address = 9+bx+cx;
cx = readw(bios + address);
address = 0xa+cx;
cx = readw(bios + address);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* now construct our machine identification number */
id = ((cx & 0xff)<<8)+((cx & 0xff00)>>8);
}
return id;
}
/*
* Probe for the presence of a Toshiba laptop
*
* returns and non-zero if unable to detect the presence of a Toshiba
* laptop, otherwise zero and determines the Machine ID, BIOS version and
* date, and SCI version.
*/
static int tosh_probe(void)
{
int i,major,minor,day,year,month,flag;
unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 };
SMMRegisters regs;
toshiba: use ioremap_cached The switch of ioremap to default to uncached doesn't break this driver but it does needlessly slow it down as BIOS space is cachable and this driver is quite happy scanning cached ROM space. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-29 13:20:23 +00:00
void __iomem *bios = ioremap_cache(0xf0000, 0x10000);
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
if (!bios)
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* extra sanity check for the string "TOSHIBA" in the BIOS because
some machines that are not Toshiba's pass the next test */
for (i=0;i<7;i++) {
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
if (readb(bios+0xe010+i)!=signature[i]) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk("toshiba: not a supported Toshiba laptop\n");
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
iounmap(bios);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENODEV;
}
}
/* call the Toshiba SCI support check routine */
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
regs.eax = 0xf0f0;
regs.ebx = 0x0000;
regs.ecx = 0x0000;
flag = tosh_smm(&regs);
/* if this is not a Toshiba laptop carry flag is set and ah=0x86 */
if ((flag==1) || ((regs.eax & 0xff00)==0x8600)) {
printk("toshiba: not a supported Toshiba laptop\n");
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
iounmap(bios);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENODEV;
}
/* if we get this far then we are running on a Toshiba (probably)! */
tosh_sci = regs.edx & 0xffff;
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* next get the machine ID of the current laptop */
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
tosh_id = tosh_get_machine_id(bios);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* get the BIOS version */
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
major = readb(bios+0xe009)-'0';
minor = ((readb(bios+0xe00b)-'0')*10)+(readb(bios+0xe00c)-'0');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tosh_bios = (major*0x100)+minor;
/* get the BIOS date */
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
day = ((readb(bios+0xfff5)-'0')*10)+(readb(bios+0xfff6)-'0');
month = ((readb(bios+0xfff8)-'0')*10)+(readb(bios+0xfff9)-'0');
year = ((readb(bios+0xfffb)-'0')*10)+(readb(bios+0xfffc)-'0');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tosh_date = (((year-90) & 0x1f)<<10) | ((month & 0xf)<<6)
| ((day & 0x1f)<<1);
/* in theory we should check the ports we are going to use for the
fn key detection (and the fan on the Portage 610/Tecra700), and
then request them to stop other drivers using them. However as
the keyboard driver grabs 0x60-0x6f and the pic driver grabs
0xa0-0xbf we can't. We just have to live dangerously and use the
ports anyway, oh boy! */
/* do we need to emulate the fan? */
if ((tosh_id==0xfccb) || (tosh_id==0xfccc))
tosh_fan = 1;
[PATCH] remove ISA legacy functions: drivers/char/toshiba.c switch from isa_read...() to ioremap() and read...() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:36 +00:00
iounmap(bios);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
static int __init toshiba_init(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int retval;
/* are we running on a Toshiba laptop */
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
if (tosh_probe())
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
drivers/char/: Spelling fixes Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:11:42 +00:00
printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* set the port to use for Fn status if not specified as a parameter */
if (tosh_fn==0x00)
tosh_set_fn_port();
/* register the device file */
retval = misc_register(&tosh_device);
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
if (retval < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return retval;
#ifdef CONFIG_PROC_FS
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
{
struct proc_dir_entry *pde;
drivers: use non-racy method for proc entries creation Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:34 +00:00
pde = proc_create("toshiba", 0, NULL, &proc_toshiba_fops);
[PATCH] seq_file conversion: toshiba.c Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:15 +00:00
if (!pde) {
misc_deregister(&tosh_device);
return -ENOMEM;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
return 0;
}
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
static void __exit toshiba_exit(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
remove_proc_entry("toshiba", NULL);
misc_deregister(&tosh_device);
}
[PATCH] Toshiba driver cleanup Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:22 +00:00
module_init(toshiba_init);
module_exit(toshiba_exit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
Reference in New Issue Copy Permalink