davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
b7503e0cdb
kernel-ark/include/net/route.h

328 lines
9.1 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Definitions for the IP router.
*
* Version: @(#)route.h 1.0.4 05/27/93
*
[PATCH] update Ross Biro bouncing email address Ross moved. Remove the bad email address so people will find the correct one in ./CREDITS. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 23:16:16 +00:00
* Authors: Ross Biro
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Fixes:
* Alan Cox : Reformatted. Added ip_rt_local()
* Alan Cox : Support for TCP parameters.
* Alexey Kuznetsov: Major changes for new routing code.
* Mike McLagan : Routing by source
* Robert Olsson : Added rt_cache statistics
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ROUTE_H
#define _ROUTE_H
#include <net/dst.h>
#include <net/inetpeer.h>
#include <net/flow.h>
ipv4: Conditionally enable transparent flow flag when connecting Set FLOWI_FLAG_ANYSRC in flowi->flags if the socket has the transparent socket option set. This way we selectively enable certain connections with non-local source addresses to be routed. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01 14:35:39 +00:00
#include <net/inet_sock.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/in_route.h>
#include <linux/rtnetlink.h>
ipv4: Fix input route performance regression. With the routing cache removal we lost the "noref" code paths on input, and this can kill some routing workloads. Reinstate the noref path when we hit a cached route in the FIB nexthops. With help from Eric Dumazet. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-26 11:14:38 +00:00
#include <linux/rcupdate.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/route.h>
#include <linux/ip.h>
#include <linux/cache.h>
[MLSXFRM]: Add flow labeling This labels the flows that could utilize IPSec xfrms at the points the flows are defined so that IPSec policy and SAs at the right label can be used. The following protos are currently not handled, but they should continue to be able to use single-labeled IPSec like they currently do. ipmr ip_gre ipip igmp sit sctp ip6_tunnel (IPv6 over IPv6 tunnel device) decnet Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-05 06:12:42 +00:00
#include <linux/security.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing While forwarding we should not use the protocol path mtu to calculate the mtu for a forwarded packet but instead use the interface mtu. We mark forwarded skbs in ip_forward with IPSKB_FORWARDED, which was introduced for multicast forwarding. But as it does not conflict with our usage in unicast code path it is perfect for reuse. I moved the functions ip_sk_accept_pmtu, ip_sk_use_pmtu and ip_skb_dst_mtu along with the new ip_dst_mtu_maybe_forward to net/ip.h to fix circular dependencies because of IPSKB_FORWARDED. Because someone might have written a software which does probe destinations manually and expects the kernel to honour those path mtus I introduced a new per-namespace "ip_forward_use_pmtu" knob so someone can disable this new behaviour. We also still use mtus which are locked on a route for forwarding. The reason for this change is, that path mtus information can be injected into the kernel via e.g. icmp_err protocol handler without verification of local sockets. As such, this could cause the IPv4 forwarding path to wrongfully emit fragmentation needed notifications or start to fragment packets along a path. Tunnel and ipsec output paths clear IPCB again, thus IPSKB_FORWARDED won't be set and further fragmentation logic will use the path mtu to determine the fragmentation size. They also recheck packet size with help of path mtu discovery and report appropriate errors. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: John Heffner <johnwheffner@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09 09:01:15 +00:00
/* IPv4 datagram length is stored into 16bit field (tot_len) */
#define IP_MAX_MTU 0xFFFFU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define RTO_ONLINK 0x01
#define RT_CONN_FLAGS(sk) (RT_TOS(inet_sk(sk)->tos) | sock_flag(sk, SOCK_LOCALROUTE))
ipv4: processing ancillary IP_TOS or IP_TTL If IP_TOS or IP_TTL are specified as ancillary data, then sendmsg() sends out packets with the specified TTL or TOS overriding the socket values specified with the traditional setsockopt(). The struct inet_cork stores the values of TOS, TTL and priority that are passed through the struct ipcm_cookie. If there are user-specified TOS (tos != -1) or TTL (ttl != 0) in the struct ipcm_cookie, these values are used to override the per-socket values. In case of TOS also the priority is changed accordingly. Two helper functions get_rttos and get_rtconn_flags are defined to take into account the presence of a user specified TOS value when computing RT_TOS and RT_CONN_FLAGS. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24 13:43:09 +00:00
#define RT_CONN_FLAGS_TOS(sk,tos) (RT_TOS(tos) | sock_flag(sk, SOCK_LOCALROUTE))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct fib_nh;
net: Implement read-only protection and COW'ing of metrics. Routing metrics are now copy-on-write. Initially a route entry points it's metrics at a read-only location. If a routing table entry exists, it will point there. Else it will point at the all zero metric place-holder called 'dst_default_metrics'. The writeability state of the metrics is stored in the low bits of the metrics pointer, we have two bits left to spare if we want to store more states. For the initial implementation, COW is implemented simply via kmalloc. However future enhancements will change this to place the writable metrics somewhere else, in order to increase sharing. Very likely this "somewhere else" will be the inetpeer cache. Note also that this means that metrics updates may transiently fail if we cannot COW the metrics successfully. But even by itself, this patch should decrease memory usage and increase cache locality especially for routing workloads. In those cases the read-only metric copies stay in place and never get written to. TCP workloads where metrics get updated, and those rare cases where PMTU triggers occur, will take a very slight performance hit. But that hit will be alleviated when the long-term writable metrics move to a more sharable location. Since the metrics storage went from a u32 array of RTAX_MAX entries to what is essentially a pointer, some retooling of the dst_entry layout was necessary. Most importantly, we need to preserve the alignment of the reference count so that it doesn't share cache lines with the read-mostly state, as per Eric Dumazet's alignment assertion checks. The only non-trivial bit here is the move of the 'flags' member into the writeable cacheline. This is OK since we are always accessing the flags around the same moment when we made a modification to the reference count. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27 04:51:05 +00:00
struct fib_info;
ipv4: per cpu uncached list RAW sockets with hdrinc suffer from contention on rt_uncached_lock spinlock. One solution is to use percpu lists, since most routes are destroyed by the cpu that created them. It is unclear why we even have to put these routes in uncached_list, as all outgoing packets should be freed when a device is dismantled. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: caacf05e5ad1 ("ipv4: Properly purge netdev references on uncached routes.") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14 23:17:06 +00:00
struct uncached_list;
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 03:26:03 +00:00
struct rtable {
net-next: remove useless union keyword remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 06:31:35 +00:00
struct dst_entry dst;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV4] route cache: Introduce rt_genid for smooth cache invalidation Current ip route cache implementation is not suited to large caches. We can consume a lot of CPU when cache must be invalidated, since we currently need to evict all cache entries, and this eviction is sometimes asynchronous. min_delay & max_delay can somewhat control this asynchronism behavior, but whole thing is a kludge, regularly triggering infamous soft lockup messages. When entries are still in use, this also consumes a lot of ram, filling dst_garbage.list. A better scheme is to use a generation identifier on each entry, so that cache invalidation can be performed by changing the table identifier, without having to scan all entries. No more delayed flushing, no more stalling when secret_interval expires. Invalidated entries will then be freed at GC time (controled by ip_rt_gc_timeout or stress), or when an invalidated entry is found in a chain when an insert is done. Thus we keep a normal equilibrium. This patch : - renames rt_hash_rnd to rt_genid (and makes it an atomic_t) - Adds a new rt_genid field to 'struct rtable' (filling a hole on 64bit) - Checks entry->rt_genid at appropriate places :
2008-02-01 01:05:09 +00:00
int rt_genid;
net: cleanup unsigned to unsigned int Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 05:58:06 +00:00
unsigned int rt_flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__u16 rt_type;
ipv4: introduce rt_uses_gateway Add new flag to remember when route is via gateway. We will use it to allow rt_gateway to contain address of directly connected host for the cases when DST_NOCACHE is used or when the NH exception caches per-destination route without DST_NOCACHE flag, i.e. when routes are not used for other destinations. By this way we force the neighbour resolving to work with the routed destination but we can use different address in the packet, feature needed for IPVS-DR where original packet for virtual IP is routed via route to real IP. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08 11:41:18 +00:00
__u8 rt_is_input;
__u8 rt_uses_gateway;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int rt_iif;
/* Info on neighbour */
[IPV4]: annotate ipv4 addresses in struct rtable and struct flowi Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-27 04:26:42 +00:00
__be32 rt_gateway;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Miscellaneous cached information */
ipv4: Maintain redirect and PMTU info in struct rtable again. Maintaining this in the inetpeer entries was not the right way to do this at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 13:58:42 +00:00
u32 rt_pmtu;
ipv4: Properly purge netdev references on uncached routes. When a device is unregistered, we have to purge all of the references to it that may exist in the entire system. If a route is uncached, we currently have no way of accomplishing this. So create a global list that is scanned when a network device goes down. This mirrors the logic in net/core/dst.c's dst_ifdown(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31 22:06:50 +00:00
net: Add FIB table id to rtable Add the FIB table id to rtable to make the information available for IPv4 as it is for IPv6. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02 20:58:35 +00:00
u32 rt_table_id;
ipv4: Properly purge netdev references on uncached routes. When a device is unregistered, we have to purge all of the references to it that may exist in the entire system. If a route is uncached, we currently have no way of accomplishing this. So create a global list that is scanned when a network device goes down. This mirrors the logic in net/core/dst.c's dst_ifdown(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31 22:06:50 +00:00
struct list_head rt_uncached;
ipv4: per cpu uncached list RAW sockets with hdrinc suffer from contention on rt_uncached_lock spinlock. One solution is to use percpu lists, since most routes are destroyed by the cpu that created them. It is unclear why we even have to put these routes in uncached_list, as all outgoing packets should be freed when a device is dismantled. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: caacf05e5ad1 ("ipv4: Properly purge netdev references on uncached routes.") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14 23:17:06 +00:00
struct uncached_list *rt_uncached_list;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
route: struct rtable can be const in rt_is_input_route and rt_is_output_route Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23 02:14:15 +00:00
static inline bool rt_is_input_route(const struct rtable *rt)
ipv4: Make rt->fl.iif tests lest obscure. When we test rt->fl.iif against zero, we're seeing if it's an output or an input route. Make that explicit with some helper functions. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12 01:07:48 +00:00
{
ipv4: Turn rt->rt_route_iif into rt->rt_is_input. That is this value's only use, as a boolean to indicate whether a route is an input route or not. So implement it that way, using a u16 gap present in the struct already. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 21:44:26 +00:00
return rt->rt_is_input != 0;
ipv4: Make rt->fl.iif tests lest obscure. When we test rt->fl.iif against zero, we're seeing if it's an output or an input route. Make that explicit with some helper functions. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12 01:07:48 +00:00
}
route: struct rtable can be const in rt_is_input_route and rt_is_output_route Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23 02:14:15 +00:00
static inline bool rt_is_output_route(const struct rtable *rt)
ipv4: Make rt->fl.iif tests lest obscure. When we test rt->fl.iif against zero, we're seeing if it's an output or an input route. Make that explicit with some helper functions. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12 01:07:48 +00:00
{
ipv4: Turn rt->rt_route_iif into rt->rt_is_input. That is this value's only use, as a boolean to indicate whether a route is an input route or not. So implement it that way, using a u16 gap present in the struct already. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 21:44:26 +00:00
return rt->rt_is_input == 0;
ipv4: Make rt->fl.iif tests lest obscure. When we test rt->fl.iif against zero, we're seeing if it's an output or an input route. Make that explicit with some helper functions. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12 01:07:48 +00:00
}
ipv4: Adjust semantics of rt->rt_gateway. In order to allow prefixed routes, we have to adjust how rt_gateway is set and interpreted. The new interpretation is: 1) rt_gateway == 0, destination is on-link, nexthop is iph->daddr 2) rt_gateway != 0, destination requires a nexthop gateway Abstract the fetching of the proper nexthop value using a new inline helper, rt_nexthop(), as suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
2012-07-13 12:03:45 +00:00
static inline __be32 rt_nexthop(const struct rtable *rt, __be32 daddr)
{
if (rt->rt_gateway)
return rt->rt_gateway;
return daddr;
}
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 03:26:03 +00:00
struct ip_rt_acct {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__u32 o_bytes;
__u32 o_packets;
__u32 i_bytes;
__u32 i_packets;
};
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 03:26:03 +00:00
struct rt_cache_stat {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned int in_slow_tot;
unsigned int in_slow_mc;
unsigned int in_no_route;
unsigned int in_brd;
unsigned int in_martian_dst;
unsigned int in_martian_src;
unsigned int out_slow_tot;
unsigned int out_slow_mc;
};
percpu: add __percpu sparse annotations to net Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 15:20:26 +00:00
extern struct ip_rt_acct __percpu *ip_rt_acct;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct in_device;
route.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 17:32:22 +00:00
int ip_rt_init(void);
void rt_cache_flush(struct net *net);
void rt_flush_dev(struct net_device *dev);
struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp);
struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp,
struct sock *sk);
struct dst_entry *ipv4_blackhole_route(struct net *net,
struct dst_entry *dst_orig);
net: implements ip_route_input_noref() ip_route_input() is the version returning a refcounted dst, while ip_route_input_noref() returns a non refcounted one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 11:32:55 +00:00
ipv4: Use flowi4 in public route lookup interfaces. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 06:12:47 +00:00
static inline struct rtable *ip_route_output_key(struct net *net, struct flowi4 *flp)
ipv4: ip_route_output_key() is better as an inline. This avoid a stack frame at zero cost. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 22:56:30 +00:00
{
return ip_route_output_flow(net, flp, NULL);
}
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
static inline struct rtable *ip_route_output(struct net *net, __be32 daddr,
__be32 saddr, u8 tos, int oif)
{
ipv4: Use flowi4 in public route lookup interfaces. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 06:12:47 +00:00
struct flowi4 fl4 = {
.flowi4_oif = oif,
net: Reorder initialization in ip_route_output to fix gcc warning If I build with W=1, for every file that includes <net/route.h>, I get the warning include/net/route.h: In function 'ip_route_output': include/net/route.h:135:3: warning: initialized field overwritten [-Woverride-init] include/net/route.h:135:3: warning: (near initialization for 'fl4') [-Woverride-init] (This is with "gcc (Debian 4.6.3-1) 4.6.3") A fix seems pretty trivial: move the initialization of .flowi4_tos earlier. As far as I can tell, this has no effect on code generation. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-10 20:05:24 +00:00
.flowi4_tos = tos,
ipv4: Use flowi4 in public route lookup interfaces. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 06:12:47 +00:00
.daddr = daddr,
.saddr = saddr,
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
};
ipv4: Use flowi4 in public route lookup interfaces. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 06:12:47 +00:00
return ip_route_output_key(net, &fl4);
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
}
ipv4: Make caller provide on-stack flow key to ip_route_output_ports(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04 03:25:42 +00:00
static inline struct rtable *ip_route_output_ports(struct net *net, struct flowi4 *fl4,
struct sock *sk,
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
__be32 daddr, __be32 saddr,
__be16 dport, __be16 sport,
__u8 proto, __u8 tos, int oif)
{
ipv4: Make caller provide on-stack flow key to ip_route_output_ports(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04 03:25:42 +00:00
flowi4_init_output(fl4, oif, sk ? sk->sk_mark : 0, tos,
ipv4: Use flowi4_init_output() in net/route.h Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31 11:52:59 +00:00
RT_SCOPE_UNIVERSE, proto,
sk ? inet_sk_flowi_flags(sk) : 0,
daddr, saddr, dport, sport);
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
if (sk)
ipv4: Make caller provide on-stack flow key to ip_route_output_ports(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04 03:25:42 +00:00
security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
return ip_route_output_flow(net, fl4, sk);
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
}
ipv4: Kill rt->rt_{src, dst} usage in IP GRE tunnels. First, make callers pass on-stack flowi4 to ip_route_output_gre() so they can get at the fully resolved flow key. Next, use that in ipgre_tunnel_xmit() to avoid the need to use rt->rt_{dst,src}. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04 19:33:34 +00:00
static inline struct rtable *ip_route_output_gre(struct net *net, struct flowi4 *fl4,
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
__be32 daddr, __be32 saddr,
__be32 gre_key, __u8 tos, int oif)
{
ipv4: Kill rt->rt_{src, dst} usage in IP GRE tunnels. First, make callers pass on-stack flowi4 to ip_route_output_gre() so they can get at the fully resolved flow key. Next, use that in ipgre_tunnel_xmit() to avoid the need to use rt->rt_{dst,src}. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04 19:33:34 +00:00
memset(fl4, 0, sizeof(*fl4));
fl4->flowi4_oif = oif;
fl4->daddr = daddr;
fl4->saddr = saddr;
fl4->flowi4_tos = tos;
fl4->flowi4_proto = IPPROTO_GRE;
fl4->fl4_gre_key = gre_key;
return ip_route_output_key(net, fl4);
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 05:00:52 +00:00
}
route.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 17:32:22 +00:00
int ip_route_input_noref(struct sk_buff *skb, __be32 dst, __be32 src,
u8 tos, struct net_device *devin);
ipv4: Fix input route performance regression. With the routing cache removal we lost the "noref" code paths on input, and this can kill some routing workloads. Reinstate the noref path when we hit a cached route in the FIB nexthops. With help from Eric Dumazet. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-26 11:14:38 +00:00
static inline int ip_route_input(struct sk_buff *skb, __be32 dst, __be32 src,
u8 tos, struct net_device *devin)
{
int err;
rcu_read_lock();
err = ip_route_input_noref(skb, dst, src, tos, devin);
if (!err)
skb_dst_force(skb);
rcu_read_unlock();
return err;
}
net: implements ip_route_input_noref() ip_route_input() is the version returning a refcounted dst, while ip_route_input_noref() returns a non refcounted one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 11:32:55 +00:00
route.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 17:32:22 +00:00
void ipv4_update_pmtu(struct sk_buff *skb, struct net *net, u32 mtu, int oif,
u32 mark, u8 protocol, int flow_flags);
void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu);
void ipv4_redirect(struct sk_buff *skb, struct net *net, int oif, u32 mark,
u8 protocol, int flow_flags);
void ipv4_sk_redirect(struct sk_buff *skb, struct sock *sk);
void ip_rt_send_redirect(struct sk_buff *skb);
unsigned int inet_addr_type(struct net *net, __be32 addr);
net: Make table id type u32 A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c89920cd3a ("net: Introduce VRF related flags and helpers") 15be405eb2ea9 ("net: Add inet_addr lookup by table") 30bbaa1950055 ("net: Fix up inet_addr_type checks") 021dd3b8a142d ("net: Add routes to the table associated with the device") dc028da54ed35 ("inet: Move VRF table lookup to inlined function") f6d3c19274c74 ("net: FIB tracepoints") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 20:26:35 +00:00
unsigned int inet_addr_type_table(struct net *net, __be32 addr, u32 tb_id);
route.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 17:32:22 +00:00
unsigned int inet_dev_addr_type(struct net *net, const struct net_device *dev,
__be32 addr);
net: Fix up inet_addr_type checks Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. inet_addr_type_dev_table keeps the same semantics as inet_addr_type but if the passed in device is enslaved to a VRF then the table for that VRF is used for the lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 20:59:05 +00:00
unsigned int inet_addr_type_dev_table(struct net *net,
const struct net_device *dev,
__be32 addr);
route.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 17:32:22 +00:00
void ip_rt_multicast_event(struct in_device *);
int ip_rt_ioctl(struct net *, unsigned int cmd, void __user *arg);
void ip_rt_get_source(u8 *src, struct sk_buff *skb, struct rtable *rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV4]: Fix secondary IP addresses after promotion This patch fixes the problem with promoting aliases when: a) a single primary and > 1 secondary addresses b) multiple primary addresses each with at least one secondary address Based on earlier efforts from Brian Pomerantz <bapper@piratehaven.org>, Patrick McHardy <kaber@trash.net> and Thomas Graf <tgraf@suug.ch> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-22 22:47:37 +00:00
struct in_ifaddr;
route.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 17:32:22 +00:00
void fib_add_ifaddr(struct in_ifaddr *);
void fib_del_ifaddr(struct in_ifaddr *, struct in_ifaddr *);
[IPV4]: Fix secondary IP addresses after promotion This patch fixes the problem with promoting aliases when: a) a single primary and > 1 secondary addresses b) multiple primary addresses each with at least one secondary address Based on earlier efforts from Brian Pomerantz <bapper@piratehaven.org>, Patrick McHardy <kaber@trash.net> and Thomas Graf <tgraf@suug.ch> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-22 22:47:37 +00:00
ipv4: avoid a test in ip_rt_put() We can save a test in ip_rt_put(), considering dst_release() accepts a NULL parameter, and dst is first element in rtable. Add a BUILD_BUG_ON() to catch any change that could break this assertion. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <amwang@redhat.com> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28 22:33:23 +00:00
static inline void ip_rt_put(struct rtable *rt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv4: avoid a test in ip_rt_put() We can save a test in ip_rt_put(), considering dst_release() accepts a NULL parameter, and dst is first element in rtable. Add a BUILD_BUG_ON() to catch any change that could break this assertion. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <amwang@redhat.com> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28 22:33:23 +00:00
/* dst_release() accepts a NULL parameter.
* We rely on dst being first structure in struct rtable
*/
BUILD_BUG_ON(offsetof(struct rtable, dst) != 0);
dst_release(&rt->dst);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#define IPTOS_RT_MASK (IPTOS_TOS_MASK & ~3)
[IPV4]: Make ip_tos2prio const. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-09 22:32:57 +00:00
extern const __u8 ip_tos2prio[16];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static inline char rt_tos2priority(u8 tos)
{
return ip_tos2prio[IPTOS_TOS(tos)>>1];
}
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
/* ip_route_connect() and ip_route_newports() work in tandem whilst
* binding a socket for a new outgoing connection.
*
* In order to use IPSEC properly, we must, in the end, have a
* route that was looked up using all available keys including source
* and destination ports.
*
* However, if a source port needs to be allocated (the user specified
* a wildcard source port) we need to obtain addressing information
* in order to perform that allocation.
*
* So ip_route_connect() looks up a route using wildcarded source and
* destination ports in the key, simply so that we can get a pair of
* addresses to use for port allocation.
*
* Later, once the ports are allocated, ip_route_newports() will make
* another route lookup if needed to make sure we catch any IPSEC
* rules keyed on the port information.
*
* The callers allocate the flow key on their stack, and must pass in
* the same flowi4 object to both the ip_route_connect() and the
* ip_route_newports() calls.
*/
static inline void ip_route_connect_init(struct flowi4 *fl4, __be32 dst, __be32 src,
u32 tos, int oif, u8 protocol,
__be16 sport, __be16 dport,
net: Remove FLOWI_FLAG_CAN_SLEEP FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-28 06:04:14 +00:00
struct sock *sk)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
__u8 flow_flags = 0;
ipv4: Conditionally enable transparent flow flag when connecting Set FLOWI_FLAG_ANYSRC in flowi->flags if the socket has the transparent socket option set. This way we selectively enable certain connections with non-local source addresses to be routed. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01 14:35:39 +00:00
if (inet_sk(sk)->transparent)
ipv4: Use flowi4_init_output() in net/route.h Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31 11:52:59 +00:00
flow_flags |= FLOWI_FLAG_ANYSRC;
net: Use VRF device index for lookups on TX As with ingress use the index of VRF master device for route lookups on egress. However, the oif should only be used to direct the lookups to a specific table. Routes in the table are not based on the VRF device but rather interfaces that are part of the VRF so do not consider the oif for lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this latter part. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 20:59:02 +00:00
if (netif_index_is_vrf(sock_net(sk), oif))
flow_flags |= FLOWI_FLAG_VRFSRC;
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
flowi4_init_output(fl4, oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE,
ipv4: Use flowi4_init_output() in net/route.h Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31 11:52:59 +00:00
protocol, flow_flags, dst, src, dport, sport);
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
}
static inline struct rtable *ip_route_connect(struct flowi4 *fl4,
__be32 dst, __be32 src, u32 tos,
int oif, u8 protocol,
__be16 sport, __be16 dport,
net: Remove FLOWI_FLAG_CAN_SLEEP FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-28 06:04:14 +00:00
struct sock *sk)
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
{
struct net *net = sock_net(sk);
struct rtable *rt;
ip_route_connect_init(fl4, dst, src, tos, oif, protocol,
net: Remove FLOWI_FLAG_CAN_SLEEP FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-28 06:04:14 +00:00
sport, dport, sk);
ipv4: Conditionally enable transparent flow flag when connecting Set FLOWI_FLAG_ANYSRC in flowi->flags if the socket has the transparent socket option set. This way we selectively enable certain connections with non-local source addresses to be routed. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01 14:35:39 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!dst || !src) {
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
rt = __ip_route_output_key(net, fl4);
ipv4: Make output route lookup return rtable directly. Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 22:31:35 +00:00
if (IS_ERR(rt))
return rt;
ip_rt_put(rt);
ipv4: reset flowi parameters on route connect Eric Dumazet found that commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is in output route lookups.) that comes in 3.0 added a regression. The problem appears to be that resulting flowi4_oif is used incorrectly as input parameter to some routing lookups. The result is that when connecting to local port without listener if the IP address that is used is not on a loopback interface we incorrectly assign RTN_UNICAST to the output route because no route is matched by oif=lo. The RST packet can not be sent immediately by tcp_v4_send_reset because it expects RTN_LOCAL. So, change ip_route_connect and ip_route_newports to update the flowi4 fields that are input parameters because we do not want unnecessary binding to oif. To make it clear what are the input parameters that can be modified during lookup and to show which fields of floiw4 are reused add a new function to update the flowi4 structure: flowi4_update_output. Thanks to Yurij M. Plotnikov for providing a bug report including a program to reproduce the problem. Thanks to Eric Dumazet for tracking the problem down to tcp_v4_send_reset and providing initial fix. Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04 13:04:46 +00:00
flowi4_update_output(fl4, oif, tos, fl4->daddr, fl4->saddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
return ip_route_output_flow(net, fl4, sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
static inline struct rtable *ip_route_newports(struct flowi4 *fl4, struct rtable *rt,
__be16 orig_sport, __be16 orig_dport,
__be16 sport, __be16 dport,
struct sock *sk)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv4: Rearrange how ip_route_newports() gets port keys. ip_route_newports() is the only place in the entire kernel that cares about the port members in the routing cache entry's lookup flow key. Therefore the only reason we store an entire flow inside of the struct rtentry is for this one special case. Rewrite ip_route_newports() such that: 1) The caller passes in the original port values, so we don't need to use the rth->fl.fl_ip_{s,d}port values to remember them. 2) The lookup flow is constructed by hand instead of being copied from the routing cache entry's flow. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24 21:38:12 +00:00
if (sport != orig_sport || dport != orig_dport) {
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
fl4->fl4_dport = dport;
fl4->fl4_sport = sport;
ipv4: Make output route lookup return rtable directly. Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 22:31:35 +00:00
ip_rt_put(rt);
ipv4: reset flowi parameters on route connect Eric Dumazet found that commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is in output route lookups.) that comes in 3.0 added a regression. The problem appears to be that resulting flowi4_oif is used incorrectly as input parameter to some routing lookups. The result is that when connecting to local port without listener if the IP address that is used is not on a loopback interface we incorrectly assign RTN_UNICAST to the output route because no route is matched by oif=lo. The RST packet can not be sent immediately by tcp_v4_send_reset because it expects RTN_LOCAL. So, change ip_route_connect and ip_route_newports to update the flowi4 fields that are input parameters because we do not want unnecessary binding to oif. To make it clear what are the input parameters that can be modified during lookup and to show which fields of floiw4 are reused add a new function to update the flowi4 structure: flowi4_update_output. Thanks to Yurij M. Plotnikov for providing a bug report including a program to reproduce the problem. Thanks to Eric Dumazet for tracking the problem down to tcp_v4_send_reset and providing initial fix. Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04 13:04:46 +00:00
flowi4_update_output(fl4, sk->sk_bound_dev_if,
RT_CONN_FLAGS(sk), fl4->daddr,
fl4->saddr);
ipv4: Sanitize and simplify ip_route_{connect,newports}() These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-26 20:28:44 +00:00
security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
return ip_route_output_flow(sock_net(sk), fl4, sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv4: Make output route lookup return rtable directly. Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 22:31:35 +00:00
return rt;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv4: Make inet_sock.h independent of route.h inet_iif() in inet_sock.h requires route.h. Since users of inet_iif() usually require other route.h functionality anyway this patch moves inet_iif() to route.h. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01 14:33:10 +00:00
static inline int inet_iif(const struct sk_buff *skb)
{
ipv4: Change rt->rt_iif encoding. On input packet processing, rt->rt_iif will be zero if we should use skb->dev->ifindex. Since we access rt->rt_iif consistently via inet_iif(), that is the only spot whose interpretation have to adjust. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23 20:57:45 +00:00
int iif = skb_rtable(skb)->rt_iif;
if (iif)
return iif;
return skb->skb_iif;
ipv4: Make inet_sock.h independent of route.h inet_iif() in inet_sock.h requires route.h. Since users of inet_iif() usually require other route.h functionality anyway this patch moves inet_iif() to route.h. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01 14:33:10 +00:00
}
ipv4: Don't pre-seed hoplimit metric. Always go through a new ip4_dst_hoplimit() helper, just like ipv6. This allowed several simplifications: 1) The interim dst_metric_hoplimit() can go as it's no longer userd. 2) The sysctl_ip_default_ttl entry no longer needs to use ipv4_doint_and_flush, since the sysctl is not cached in routing cache metrics any longer. 3) ipv4_doint_and_flush no longer needs to be exported and therefore can be marked static. When ipv4_doint_and_flush_strategy was removed some time ago, the external declaration in ip.h was mistakenly left around so kill that off too. We have to move the sysctl_ip_default_ttl declaration into ipv4's route cache definition header net/route.h, because currently net/ip.h (where the declaration lives now) has a back dependency on net/route.h Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 05:55:08 +00:00
extern int sysctl_ip_default_ttl;
static inline int ip4_dst_hoplimit(const struct dst_entry *dst)
{
int hoplimit = dst_metric_raw(dst, RTAX_HOPLIMIT);
if (hoplimit == 0)
hoplimit = sysctl_ip_default_ttl;
return hoplimit;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* _ROUTE_H */
Reference in New Issue Copy Permalink