davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
b24413180f
kernel-ark/net/decnet/dn_neigh.c

621 lines
16 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* DECnet An implementation of the DECnet protocol suite for the LINUX
* operating system. DECnet is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
[NET] DECNET: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:40 +00:00
* DECnet Neighbour Functions (Adjacency Database and
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* On-Ethernet Cache)
*
* Author: Steve Whitehouse <SteveW@ACM.org>
*
*
* Changes:
* Steve Whitehouse : Fixed router listing routine
* Steve Whitehouse : Added error_report functions
* Steve Whitehouse : Added default router detection
* Steve Whitehouse : Hop counts in outgoing messages
* Steve Whitehouse : Fixed src/dst in outgoing messages so
* forwarding now stands a good chance of
* working.
* Steve Whitehouse : Fixed neighbour states (for now anyway).
* Steve Whitehouse : Made error_report functions dummies. This
* is not the right place to return skbs.
* Steve Whitehouse : Convert to seq_file
*
*/
#include <linux/net.h>
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/if_arp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/if_ether.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/netfilter_decnet.h>
#include <linux/spinlock.h>
#include <linux/seq_file.h>
#include <linux/rcupdate.h>
#include <linux/jhash.h>
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 23:09:06 +00:00
#include <linux/atomic.h>
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 10:01:34 +00:00
#include <net/net_namespace.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <net/neighbour.h>
#include <net/dst.h>
#include <net/flow.h>
#include <net/dn.h>
#include <net/dn_dev.h>
#include <net/dn_neigh.h>
#include <net/dn_route.h>
static int dn_neigh_construct(struct neighbour *);
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
static void dn_neigh_error_report(struct neighbour *, struct sk_buff *);
static int dn_neigh_output(struct neighbour *neigh, struct sk_buff *skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
* Operations for adding the link layer header.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
static const struct neigh_ops dn_neigh_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.family = AF_DECnet,
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
.error_report = dn_neigh_error_report,
.output = dn_neigh_output,
.connected_output = dn_neigh_output,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
net neigh: RCU conversion of neigh hash table David This is the first step for RCU conversion of neigh code. Next patches will convert hash_buckets[] and "struct neighbour" to RCU protected objects. Thanks [PATCH net-next] net neigh: RCU conversion of neigh hash table Instead of storing hash_buckets, hash_mask and hash_rnd in "struct neigh_table", a new structure is defined : struct neigh_hash_table { struct neighbour **hash_buckets; unsigned int hash_mask; __u32 hash_rnd; struct rcu_head rcu; }; And "struct neigh_table" has an RCU protected pointer to such a neigh_hash_table. This means the signature of (*hash)() function changed: We need to add a third parameter with the actual hash_rnd value, since this is not anymore a neigh_table field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 06:15:44 +00:00
static u32 dn_neigh_hash(const void *pkey,
const struct net_device *dev,
ipv6: Use universal hash for NDISC. In order to perform a proper universal hash on a vector of integers, we have to use different universal hashes on each vector element. Which means we need 4 different hash randoms for ipv6. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-28 20:06:58 +00:00
__u32 *hash_rnd)
net neigh: RCU conversion of neigh hash table David This is the first step for RCU conversion of neigh code. Next patches will convert hash_buckets[] and "struct neighbour" to RCU protected objects. Thanks [PATCH net-next] net neigh: RCU conversion of neigh hash table Instead of storing hash_buckets, hash_mask and hash_rnd in "struct neigh_table", a new structure is defined : struct neigh_hash_table { struct neighbour **hash_buckets; unsigned int hash_mask; __u32 hash_rnd; struct rcu_head rcu; }; And "struct neigh_table" has an RCU protected pointer to such a neigh_hash_table. This means the signature of (*hash)() function changed: We need to add a third parameter with the actual hash_rnd value, since this is not anymore a neigh_table field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 06:15:44 +00:00
{
ipv6: Use universal hash for NDISC. In order to perform a proper universal hash on a vector of integers, we have to use different universal hashes on each vector element. Which means we need 4 different hash randoms for ipv6. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-28 20:06:58 +00:00
return jhash_2words(*(__u16 *)pkey, 0, hash_rnd[0]);
net neigh: RCU conversion of neigh hash table David This is the first step for RCU conversion of neigh code. Next patches will convert hash_buckets[] and "struct neighbour" to RCU protected objects. Thanks [PATCH net-next] net neigh: RCU conversion of neigh hash table Instead of storing hash_buckets, hash_mask and hash_rnd in "struct neigh_table", a new structure is defined : struct neigh_hash_table { struct neighbour **hash_buckets; unsigned int hash_mask; __u32 hash_rnd; struct rcu_head rcu; }; And "struct neigh_table" has an RCU protected pointer to such a neigh_hash_table. This means the signature of (*hash)() function changed: We need to add a third parameter with the actual hash_rnd value, since this is not anymore a neigh_table field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 06:15:44 +00:00
}
neigh: Factor out ___neigh_lookup_noref While looking at the mpls code I found myself writing yet another version of neigh_lookup_noref. We currently have __ipv4_lookup_noref and __ipv6_lookup_noref. So to make my work a little easier and to make it a smidge easier to verify/maintain the mpls code in the future I stopped and wrote ___neigh_lookup_noref. Then I rewote __ipv4_lookup_noref and __ipv6_lookup_noref in terms of this new function. I tested my new version by verifying that the same code is generated in ip_finish_output2 and ip6_finish_output2 where these functions are inlined. To get to ___neigh_lookup_noref I added a new neighbour cache table function key_eq. So that the static size of the key would be available. I also added __neigh_lookup_noref for people who want to to lookup a neighbour table entry quickly but don't know which neibhgour table they are going to look up. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 23:10:44 +00:00
static bool dn_key_eq(const struct neighbour *neigh, const void *pkey)
{
return neigh_key_eq16(neigh, pkey);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct neigh_table dn_neigh_table = {
.family = PF_DECnet,
net neighbour, decnet: Ensure to align device private data on preferred alignment. To allow both of protocol-specific data and device-specific data attached with neighbour entry, and to eliminate size calculation cost when allocating entry, sizeof protocol-speicic data must be multiple of NEIGH_PRIV_ALIGN. On 64bit archs, sizeof(struct dn_neigh) is multiple of NEIGH_PRIV_ALIGN, but on 32bit archs, it was not. Introduce NEIGH_ENTRY_SPACE() macro to ensure that protocol-specific entry-size meets our requirement. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-09 07:00:59 +00:00
.entry_size = NEIGH_ENTRY_SIZE(sizeof(struct dn_neigh)),
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
.key_len = sizeof(__le16),
neigh: Don't require dst in neigh_hh_init - Add protocol to neigh_tbl so that dst->ops->protocol is not needed - Acquire the device from neigh->dev This results in a neigh_hh_init that will cache the samve values regardless of the packets flowing through it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 06:13:22 +00:00
.protocol = cpu_to_be16(ETH_P_DNA_RT),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.hash = dn_neigh_hash,
neigh: Factor out ___neigh_lookup_noref While looking at the mpls code I found myself writing yet another version of neigh_lookup_noref. We currently have __ipv4_lookup_noref and __ipv6_lookup_noref. So to make my work a little easier and to make it a smidge easier to verify/maintain the mpls code in the future I stopped and wrote ___neigh_lookup_noref. Then I rewote __ipv4_lookup_noref and __ipv6_lookup_noref in terms of this new function. I tested my new version by verifying that the same code is generated in ip_finish_output2 and ip6_finish_output2 where these functions are inlined. To get to ___neigh_lookup_noref I added a new neighbour cache table function key_eq. So that the static size of the key would be available. I also added __neigh_lookup_noref for people who want to to lookup a neighbour table entry quickly but don't know which neibhgour table they are going to look up. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 23:10:44 +00:00
.key_eq = dn_key_eq,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.constructor = dn_neigh_construct,
.id = "dn_neigh_cache",
.parms ={
.tbl = &dn_neigh_table,
neigh: convert parms to an array This patch converts the neigh param members to an array. This allows easier manipulation which will be needed later on to provide better management of default values. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07 18:26:53 +00:00
.reachable_time = 30 * HZ,
.data = {
[NEIGH_VAR_MCAST_PROBES] = 0,
[NEIGH_VAR_UCAST_PROBES] = 0,
[NEIGH_VAR_APP_PROBES] = 0,
[NEIGH_VAR_RETRANS_TIME] = 1 * HZ,
[NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ,
[NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ,
[NEIGH_VAR_GC_STALETIME] = 60 * HZ,
neigh: increase queue_len_bytes to match wmem_default Florian reported UDP xmit drops that could be root caused to the too small neigh limit. Current limit is 64 KB, meaning that even a single UDP socket would hit it, since its default sk_sndbuf comes from net.core.wmem_default (~212992 bytes on 64bit arches). Once ARP/ND resolution is in progress, we should allow a little more packets to be queued, at least for one producer. Once neigh arp_queue is filled, a rogue socket should hit its sk_sndbuf limit and either block in sendmsg() or return -EAGAIN. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29 22:16:01 +00:00
[NEIGH_VAR_QUEUE_LEN_BYTES] = SK_WMEM_MAX,
neigh: convert parms to an array This patch converts the neigh param members to an array. This allows easier manipulation which will be needed later on to provide better management of default values. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07 18:26:53 +00:00
[NEIGH_VAR_PROXY_QLEN] = 0,
[NEIGH_VAR_ANYCAST_DELAY] = 0,
[NEIGH_VAR_PROXY_DELAY] = 0,
[NEIGH_VAR_LOCKTIME] = 1 * HZ,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
.gc_interval = 30 * HZ,
.gc_thresh1 = 128,
.gc_thresh2 = 512,
.gc_thresh3 = 1024,
};
static int dn_neigh_construct(struct neighbour *neigh)
{
struct net_device *dev = neigh->dev;
DECnet: Use container_of() for embedded struct Instead of a direct cross-type cast, use conatiner_of() to locate the embedded structure, even in the face of future struct layout randomization. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 22:31:44 +00:00
struct dn_neigh *dn = container_of(neigh, struct dn_neigh, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct dn_dev *dn_db;
struct neigh_parms *parms;
rcu_read_lock();
dn_db = rcu_dereference(dev->dn_ptr);
if (dn_db == NULL) {
rcu_read_unlock();
return -EINVAL;
}
parms = dn_db->neigh_parms;
if (!parms) {
rcu_read_unlock();
return -EINVAL;
}
__neigh_parms_put(neigh->parms);
neigh->parms = neigh_parms_clone(parms);
[DECNET]: Fix RCU race condition in dn_neigh_construct(). Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-17 19:05:27 +00:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
neigh->ops = &dn_neigh_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
neigh->nud_state = NUD_NOARP;
neigh->output = neigh->ops->connected_output;
if ((dev->type == ARPHRD_IPGRE) || (dev->flags & IFF_POINTOPOINT))
memcpy(neigh->ha, dev->broadcast, dev->addr_len);
else if ((dev->type == ARPHRD_ETHER) || (dev->type == ARPHRD_LOOPBACK))
dn_dn2eth(neigh->ha, dn->addr);
else {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_dbg_ratelimited("Trying to create neigh for hw %d\n",
dev->type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EINVAL;
}
/*
* Make an estimate of the remote block size by assuming that its
* two less then the device mtu, which it true for ethernet (and
* other things which support long format headers) since there is
* an extra length field (of 16 bits) which isn't part of the
* ethernet headers and which the DECnet specs won't admit is part
* of the DECnet routing headers either.
*
* If we over estimate here its no big deal, the NSP negotiations
* will prevent us from sending packets which are too large for the
* remote node to handle. In any case this figure is normally updated
* by a hello message in most cases.
*/
dn->blksize = dev->mtu - 2;
return 0;
}
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
static void dn_neigh_error_report(struct neighbour *neigh, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
printk(KERN_DEBUG "dn_neigh_error_report: called\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree_skb(skb);
}
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
static int dn_neigh_output(struct neighbour *neigh, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
net: skb->dst accessors Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02 05:19:30 +00:00
struct dst_entry *dst = skb_dst(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct dn_route *rt = (struct dn_route *)dst;
struct net_device *dev = neigh->dev;
char mac_addr[ETH_ALEN];
decnet: Add missing neigh->ha locking to dn_neigh_output_packet() Basically, mirror the logic in neigh_connected_output(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-01 21:34:25 +00:00
unsigned int seq;
int err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dn_dn2eth(mac_addr, rt->rt_local_src);
decnet: Add missing neigh->ha locking to dn_neigh_output_packet() Basically, mirror the logic in neigh_connected_output(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-01 21:34:25 +00:00
do {
seq = read_seqbegin(&neigh->ha_lock);
err = dev_hard_header(skb, dev, ntohs(skb->protocol),
neigh->ha, mac_addr, skb->len);
} while (read_seqretry(&neigh->ha_lock, seq));
if (err >= 0)
err = dev_queue_xmit(skb);
else {
kfree_skb(skb);
err = -EINVAL;
}
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
netfilter: Pass net into okfn This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:18 +00:00
static int dn_neigh_output_packet(struct net *net, struct sock *sk, struct sk_buff *skb)
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
{
struct dst_entry *dst = skb_dst(skb);
struct dn_route *rt = (struct dn_route *)dst;
struct neighbour *neigh = rt->n;
return neigh->output(neigh, skb);
}
/*
* For talking to broadcast devices: Ethernet & PPP
*/
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 02:19:04 +00:00
static int dn_long_output(struct neighbour *neigh, struct sock *sk,
struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev = neigh->dev;
int headroom = dev->hard_header_len + sizeof(struct dn_long_packet) + 3;
unsigned char *data;
struct dn_long_packet *lp;
struct dn_skb_cb *cb = DN_SKB_CB(skb);
if (skb_headroom(skb) < headroom) {
struct sk_buff *skb2 = skb_realloc_headroom(skb, headroom);
if (skb2 == NULL) {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_crit_ratelimited("dn_long_output: no memory\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree_skb(skb);
return -ENOBUFS;
}
net: use consume_skb() in place of kfree_skb() Remove some dropwatch/drop_monitor false positives. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-04 01:17:19 +00:00
consume_skb(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
skb = skb2;
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_info_ratelimited("dn_long_output: Increasing headroom\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
data = skb_push(skb, sizeof(struct dn_long_packet) + 3);
lp = (struct dn_long_packet *)(data+3);
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
*((__le16 *)data) = cpu_to_le16(skb->len - 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*(data + 2) = 1 | DN_RT_F_PF; /* Padding */
lp->msgflg = DN_RT_PKT_LONG|(cb->rt_flags&(DN_RT_F_IE|DN_RT_F_RQR|DN_RT_F_RTS));
lp->d_area = lp->d_subarea = 0;
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
dn_dn2eth(lp->d_id, cb->dst);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
lp->s_area = lp->s_subarea = 0;
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
dn_dn2eth(lp->s_id, cb->src);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
lp->nl2 = 0;
lp->visit_ct = cb->hops & 0x3f;
lp->s_class = 0;
lp->pt = 0;
[SK_BUFF]: Introduce skb_reset_network_header(skb) For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-11 03:45:18 +00:00
skb_reset_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netfilter: Pass struct net into the netfilter hooks Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:16 +00:00
return NF_HOOK(NFPROTO_DECNET, NF_DN_POST_ROUTING,
&init_net, sk, skb, NULL, neigh->dev,
dn_neigh_output_packet);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
/*
* For talking to pointopoint and multidrop devices: DDCMP and X.25
*/
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 02:19:04 +00:00
static int dn_short_output(struct neighbour *neigh, struct sock *sk,
struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev = neigh->dev;
int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2;
struct dn_short_packet *sp;
unsigned char *data;
struct dn_skb_cb *cb = DN_SKB_CB(skb);
[NET] DECNET: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:40 +00:00
if (skb_headroom(skb) < headroom) {
struct sk_buff *skb2 = skb_realloc_headroom(skb, headroom);
if (skb2 == NULL) {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_crit_ratelimited("dn_short_output: no memory\n");
[NET] DECNET: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:40 +00:00
kfree_skb(skb);
return -ENOBUFS;
}
net: use consume_skb() in place of kfree_skb() Remove some dropwatch/drop_monitor false positives. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-04 01:17:19 +00:00
consume_skb(skb);
[NET] DECNET: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:40 +00:00
skb = skb2;
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_info_ratelimited("dn_short_output: Increasing headroom\n");
[NET] DECNET: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:40 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
data = skb_push(skb, sizeof(struct dn_short_packet) + 2);
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
*((__le16 *)data) = cpu_to_le16(skb->len - 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sp = (struct dn_short_packet *)(data+2);
sp->msgflg = DN_RT_PKT_SHORT|(cb->rt_flags&(DN_RT_F_RQR|DN_RT_F_RTS));
sp->dstnode = cb->dst;
sp->srcnode = cb->src;
sp->forward = cb->hops & 0x3f;
[SK_BUFF]: Introduce skb_reset_network_header(skb) For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-11 03:45:18 +00:00
skb_reset_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netfilter: Pass struct net into the netfilter hooks Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:16 +00:00
return NF_HOOK(NFPROTO_DECNET, NF_DN_POST_ROUTING,
&init_net, sk, skb, NULL, neigh->dev,
dn_neigh_output_packet);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
* For talking to DECnet phase III nodes
* Phase 3 output is the same as short output, execpt that
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* it clears the area bits before transmission.
*/
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 02:19:04 +00:00
static int dn_phase3_output(struct neighbour *neigh, struct sock *sk,
struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev = neigh->dev;
int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2;
struct dn_short_packet *sp;
unsigned char *data;
struct dn_skb_cb *cb = DN_SKB_CB(skb);
if (skb_headroom(skb) < headroom) {
struct sk_buff *skb2 = skb_realloc_headroom(skb, headroom);
if (skb2 == NULL) {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_crit_ratelimited("dn_phase3_output: no memory\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree_skb(skb);
return -ENOBUFS;
}
net: use consume_skb() in place of kfree_skb() Remove some dropwatch/drop_monitor false positives. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-04 01:17:19 +00:00
consume_skb(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
skb = skb2;
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_info_ratelimited("dn_phase3_output: Increasing headroom\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
data = skb_push(skb, sizeof(struct dn_short_packet) + 2);
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
*((__le16 *)data) = cpu_to_le16(skb->len - 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sp = (struct dn_short_packet *)(data + 2);
sp->msgflg = DN_RT_PKT_SHORT|(cb->rt_flags&(DN_RT_F_RQR|DN_RT_F_RTS));
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
sp->dstnode = cb->dst & cpu_to_le16(0x03ff);
sp->srcnode = cb->src & cpu_to_le16(0x03ff);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sp->forward = cb->hops & 0x3f;
[SK_BUFF]: Introduce skb_reset_network_header(skb) For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-11 03:45:18 +00:00
skb_reset_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netfilter: Pass struct net into the netfilter hooks Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:16 +00:00
return NF_HOOK(NFPROTO_DECNET, NF_DN_POST_ROUTING,
&init_net, sk, skb, NULL, neigh->dev,
dn_neigh_output_packet);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
netfilter: Pass net into okfn This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:18 +00:00
int dn_to_neigh_output(struct net *net, struct sock *sk, struct sk_buff *skb)
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
{
struct dst_entry *dst = skb_dst(skb);
struct dn_route *rt = (struct dn_route *) dst;
struct neighbour *neigh = rt->n;
DECnet: Use container_of() for embedded struct Instead of a direct cross-type cast, use conatiner_of() to locate the embedded structure, even in the face of future struct layout randomization. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 22:31:44 +00:00
struct dn_neigh *dn = container_of(neigh, struct dn_neigh, n);
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
struct dn_dev *dn_db;
bool use_long;
rcu_read_lock();
dn_db = rcu_dereference(neigh->dev->dn_ptr);
if (dn_db == NULL) {
rcu_read_unlock();
return -EINVAL;
}
use_long = dn_db->use_long;
rcu_read_unlock();
if (dn->flags & DN_NDFLAG_P3)
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 02:19:04 +00:00
return dn_phase3_output(neigh, sk, skb);
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
if (use_long)
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 02:19:04 +00:00
return dn_long_output(neigh, sk, skb);
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
else
netfilter: Pass socket pointer down through okfn(). On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 02:19:04 +00:00
return dn_short_output(neigh, sk, skb);
DECnet: Only use neigh_ops for adding the link layer header Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 16:16:43 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Unfortunately, the neighbour code uses the device in its hash
* function, so we don't get any advantage from it. This function
* basically does a neigh_lookup(), but without comparing the device
* field. This is required for the On-Ethernet cache
*/
/*
* Pointopoint link receives a hello message
*/
void dn_neigh_pointopoint_hello(struct sk_buff *skb)
{
kfree_skb(skb);
}
/*
* Ethernet router hello message received
*/
netfilter: Pass net into okfn This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:18 +00:00
int dn_neigh_router_hello(struct net *net, struct sock *sk, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct rtnode_hello_message *msg = (struct rtnode_hello_message *)skb->data;
struct neighbour *neigh;
struct dn_neigh *dn;
struct dn_dev *dn_db;
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
__le16 src;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
src = dn_eth2dn(msg->id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
neigh = __neigh_lookup(&dn_neigh_table, &src, skb->dev, 1);
DECnet: Use container_of() for embedded struct Instead of a direct cross-type cast, use conatiner_of() to locate the embedded structure, even in the face of future struct layout randomization. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 22:31:44 +00:00
dn = container_of(neigh, struct dn_neigh, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (neigh) {
write_lock(&neigh->lock);
neigh->used = jiffies;
decnet: RCU conversion and get rid of dev_base_lock While tracking dev_base_lock users, I found decnet used it in dnet_select_source(), but for a wrong purpose: Writers only hold RTNL, not dev_base_lock, so readers must use RCU if they cannot use RTNL. Adds an rcu_head in struct dn_ifaddr and handle proper RCU management. Adds __rcu annotation in dn_route as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-29 03:09:24 +00:00
dn_db = rcu_dereference(neigh->dev->dn_ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!(neigh->nud_state & NUD_PERMANENT)) {
neigh->updated = jiffies;
if (neigh->dev->type == ARPHRD_ETHER)
memcpy(neigh->ha, &eth_hdr(skb)->h_source, ETH_ALEN);
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
dn->blksize = le16_to_cpu(msg->blksize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dn->priority = msg->priority;
dn->flags &= ~DN_NDFLAG_P3;
decnet: Reduce switch/case indent Make the case labels the same indent as the switch. git diff -w shows differences for line wrapping. (fit multiple lines to 80 columns, join where possible) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 09:43:03 +00:00
switch (msg->iinfo & DN_RT_INFO_TYPE) {
case DN_RT_INFO_L1RT:
dn->flags &=~DN_NDFLAG_R2;
dn->flags |= DN_NDFLAG_R1;
break;
case DN_RT_INFO_L2RT:
dn->flags |= DN_NDFLAG_R2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
[DECNET]: Only use local routers The attached patch makes DECnet routing only use routers from the same area - rather than the highest rated router seen. In theory there should not be an out-of-area router on a local network but some networks are bridged rather than properly routed. VMS seems to behave similarly: if I bring up a VMS node with no router then it can't see anything else on the global network. Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 22:24:02 +00:00
/* Only use routers in our area */
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
if ((le16_to_cpu(src)>>10) == (le16_to_cpu((decnet_address))>>10)) {
[DECNET]: Only use local routers The attached patch makes DECnet routing only use routers from the same area - rather than the highest rated router seen. In theory there should not be an out-of-area router on a local network but some networks are bridged rather than properly routed. VMS seems to behave similarly: if I bring up a VMS node with no router then it can't see anything else on the global network. Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 22:24:02 +00:00
if (!dn_db->router) {
dn_db->router = neigh_clone(neigh);
} else {
if (msg->priority > ((struct dn_neigh *)dn_db->router)->priority)
neigh_release(xchg(&dn_db->router, neigh_clone(neigh)));
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
write_unlock(&neigh->lock);
neigh_release(neigh);
}
kfree_skb(skb);
return 0;
}
/*
* Endnode hello message received
*/
netfilter: Pass net into okfn This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 01:04:18 +00:00
int dn_neigh_endnode_hello(struct net *net, struct sock *sk, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct endnode_hello_message *msg = (struct endnode_hello_message *)skb->data;
struct neighbour *neigh;
struct dn_neigh *dn;
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
__le16 src;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[DECnet]: Endian annotation and fixes for DECnet. The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:42:39 +00:00
src = dn_eth2dn(msg->id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
neigh = __neigh_lookup(&dn_neigh_table, &src, skb->dev, 1);
DECnet: Use container_of() for embedded struct Instead of a direct cross-type cast, use conatiner_of() to locate the embedded structure, even in the face of future struct layout randomization. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 22:31:44 +00:00
dn = container_of(neigh, struct dn_neigh, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (neigh) {
write_lock(&neigh->lock);
neigh->used = jiffies;
if (!(neigh->nud_state & NUD_PERMANENT)) {
neigh->updated = jiffies;
if (neigh->dev->type == ARPHRD_ETHER)
memcpy(neigh->ha, &eth_hdr(skb)->h_source, ETH_ALEN);
dn->flags &= ~(DN_NDFLAG_R1 | DN_NDFLAG_R2);
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
dn->blksize = le16_to_cpu(msg->blksize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dn->priority = 0;
}
write_unlock(&neigh->lock);
neigh_release(neigh);
}
kfree_skb(skb);
return 0;
}
static char *dn_find_slot(char *base, int max, int priority)
{
int i;
unsigned char *min = NULL;
base += 6; /* skip first id */
for(i = 0; i < max; i++) {
if (!min || (*base < *min))
min = base;
base += 7; /* find next priority */
}
if (!min)
return NULL;
return (*min < priority) ? (min - 6) : NULL;
}
struct elist_cb_state {
struct net_device *dev;
unsigned char *ptr;
unsigned char *rs;
int t, n;
};
static void neigh_elist_cb(struct neighbour *neigh, void *_info)
{
struct elist_cb_state *s = _info;
struct dn_neigh *dn;
if (neigh->dev != s->dev)
return;
DECnet: Use container_of() for embedded struct Instead of a direct cross-type cast, use conatiner_of() to locate the embedded structure, even in the face of future struct layout randomization. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 22:31:44 +00:00
dn = container_of(neigh, struct dn_neigh, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!(dn->flags & (DN_NDFLAG_R1|DN_NDFLAG_R2)))
return;
if (s->t == s->n)
s->rs = dn_find_slot(s->ptr, s->n, dn->priority);
else
s->t++;
if (s->rs == NULL)
return;
dn_dn2eth(s->rs, dn->addr);
s->rs += 6;
*(s->rs) = neigh->nud_state & NUD_CONNECTED ? 0x80 : 0x0;
*(s->rs) |= dn->priority;
s->rs++;
}
int dn_neigh_elist(struct net_device *dev, unsigned char *ptr, int n)
{
struct elist_cb_state state;
state.dev = dev;
state.t = 0;
state.n = n;
state.ptr = ptr;
state.rs = ptr;
neigh_for_each(&dn_neigh_table, neigh_elist_cb, &state);
return state.t;
}
#ifdef CONFIG_PROC_FS
static inline void dn_neigh_format_entry(struct seq_file *seq,
struct neighbour *n)
{
DECnet: Use container_of() for embedded struct Instead of a direct cross-type cast, use conatiner_of() to locate the embedded structure, even in the face of future struct layout randomization. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 22:31:44 +00:00
struct dn_neigh *dn = container_of(n, struct dn_neigh, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
char buf[DN_ASCBUF_LEN];
read_lock(&n->lock);
seq_printf(seq, "%-7s %s%s%s %02x %02d %07ld %-8s\n",
decnet: remove private wrappers of endian helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 08:12:47 +00:00
dn_addr2asc(le16_to_cpu(dn->addr), buf),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(dn->flags&DN_NDFLAG_R1) ? "1" : "-",
(dn->flags&DN_NDFLAG_R2) ? "2" : "-",
(dn->flags&DN_NDFLAG_P3) ? "3" : "-",
dn->n.nud_state,
net: convert neighbour.refcnt from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 10:07:55 +00:00
refcount_read(&dn->n.refcnt),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dn->blksize,
(dn->n.dev) ? dn->n.dev->name : "?");
read_unlock(&n->lock);
}
static int dn_neigh_seq_show(struct seq_file *seq, void *v)
{
if (v == SEQ_START_TOKEN) {
seq_puts(seq, "Addr Flags State Use Blksize Dev\n");
} else {
dn_neigh_format_entry(seq, v);
}
return 0;
}
static void *dn_neigh_seq_start(struct seq_file *seq, loff_t *pos)
{
return neigh_seq_start(seq, pos, &dn_neigh_table,
NEIGH_SEQ_NEIGH_ONLY);
}
[NET]: Make all initialized struct seq_operations const. Make all initialized struct seq_operations in net/ const Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11 06:07:31 +00:00
static const struct seq_operations dn_neigh_seq_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.start = dn_neigh_seq_start,
.next = neigh_seq_next,
.stop = neigh_seq_stop,
.show = dn_neigh_seq_show,
};
static int dn_neigh_seq_open(struct inode *inode, struct file *file)
{
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 08:13:18 +00:00
return seq_open_net(inode, file, &dn_neigh_seq_ops,
sizeof(struct neigh_seq_state));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] mark struct file_operations const 7 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:55:35 +00:00
static const struct file_operations dn_neigh_seq_fops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.owner = THIS_MODULE,
.open = dn_neigh_seq_open,
.read = seq_read,
.llseek = seq_lseek,
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 08:13:18 +00:00
.release = seq_release_net,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
#endif
void __init dn_neigh_init(void)
{
neigh: remove dynamic neigh table registration support Currently there are only three neigh tables in the whole kernel: arp table, ndisc table and decnet neigh table. What's more, we don't support registering multiple tables per family. Therefore we can just make these tables statically built-in. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10 23:59:36 +00:00
neigh_table_init(NEIGH_DN_TABLE, &dn_neigh_table);
net: proc: change proc_net_fops_create to proc_create Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 01:34:54 +00:00
proc_create("decnet_neigh", S_IRUGO, init_net.proc_net,
&dn_neigh_seq_fops);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
void __exit dn_neigh_cleanup(void)
{
net: proc: change proc_net_remove to remove_proc_entry proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 01:34:56 +00:00
remove_proc_entry("decnet_neigh", init_net.proc_net);
neigh: remove dynamic neigh table registration support Currently there are only three neigh tables in the whole kernel: arp table, ndisc table and decnet neigh table. What's more, we don't support registering multiple tables per family. Therefore we can just make these tables statically built-in. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10 23:59:36 +00:00
neigh_table_clear(NEIGH_DN_TABLE, &dn_neigh_table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
Reference in New Issue Copy Permalink