kernel-ark/arch/ppc64/kernel/align.c

397 lines
11 KiB
C
Raw Normal View History

/* align.c - handle alignment exceptions for the Power PC.
*
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
* Copyright (c) 1998-1999 TiVo, Inc.
* PowerPC 403GCX modifications.
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
* PowerPC 403GCX/405GP modifications.
* Copyright (c) 2001-2002 PPC64 team, IBM Corp
* 64-bit and Power4 support
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/cache.h>
#include <asm/cputable.h>
struct aligninfo {
unsigned char len;
unsigned char flags;
};
#define IS_XFORM(inst) (((inst) >> 26) == 31)
#define IS_DSFORM(inst) (((inst) >> 26) >= 56)
#define INVALID { 0, 0 }
#define LD 1 /* load */
#define ST 2 /* store */
#define SE 4 /* sign-extend value */
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
#define SW 0x40 /* byte swap */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
* bits to information about the operand length and what the
* instruction would do.
*/
static struct aligninfo aligninfo[128] = {
{ 4, LD }, /* 00 0 0000: lwz / lwarx */
INVALID, /* 00 0 0001 */
{ 4, ST }, /* 00 0 0010: stw */
INVALID, /* 00 0 0011 */
{ 2, LD }, /* 00 0 0100: lhz */
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
{ 4, LD+F }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
{ 4, ST+F }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
{ 8, LD }, /* 00 0 1101: ld */
INVALID, /* 00 0 1110 */
{ 8, ST }, /* 00 0 1111: std */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
INVALID, /* 00 1 0011 */
{ 2, LD+U }, /* 00 1 0100: lhzu */
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
{ 4, LD+F+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
{ 4, ST+F+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
INVALID, /* 00 1 1110 */
INVALID, /* 00 1 1111 */
{ 8, LD }, /* 01 0 0000: ldx */
INVALID, /* 01 0 0001 */
{ 8, ST }, /* 01 0 0010: stdx */
INVALID, /* 01 0 0011 */
INVALID, /* 01 0 0100 */
{ 4, LD+SE }, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
{ 0, LD }, /* 01 0 1000: lswx */
{ 0, LD }, /* 01 0 1001: lswi */
{ 0, ST }, /* 01 0 1010: stswx */
{ 0, ST }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
{ 8, LD+U }, /* 01 0 1101: ldu */
INVALID, /* 01 0 1110 */
{ 8, ST+U }, /* 01 0 1111: stdu */
{ 8, LD+U }, /* 01 1 0000: ldux */
INVALID, /* 01 1 0001 */
{ 8, ST+U }, /* 01 1 0010: stdux */
INVALID, /* 01 1 0011 */
INVALID, /* 01 1 0100 */
{ 4, LD+SE+U }, /* 01 1 0101: lwaux */
INVALID, /* 01 1 0110 */
INVALID, /* 01 1 0111 */
INVALID, /* 01 1 1000 */
INVALID, /* 01 1 1001 */
INVALID, /* 01 1 1010 */
INVALID, /* 01 1 1011 */
INVALID, /* 01 1 1100 */
INVALID, /* 01 1 1101 */
INVALID, /* 01 1 1110 */
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
{ 0, ST }, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
INVALID, /* 10 0 0110 */
INVALID, /* 10 0 0111 */
{ 4, LD+SW }, /* 10 0 1000: lwbrx */
INVALID, /* 10 0 1001 */
{ 4, ST+SW }, /* 10 0 1010: stwbrx */
INVALID, /* 10 0 1011 */
{ 2, LD+SW }, /* 10 0 1100: lhbrx */
{ 4, LD+SE }, /* 10 0 1101 lwa */
{ 2, ST+SW }, /* 10 0 1110: sthbrx */
INVALID, /* 10 0 1111 */
INVALID, /* 10 1 0000 */
INVALID, /* 10 1 0001 */
INVALID, /* 10 1 0010 */
INVALID, /* 10 1 0011 */
INVALID, /* 10 1 0100 */
INVALID, /* 10 1 0101 */
INVALID, /* 10 1 0110 */
INVALID, /* 10 1 0111 */
INVALID, /* 10 1 1000 */
INVALID, /* 10 1 1001 */
INVALID, /* 10 1 1010 */
INVALID, /* 10 1 1011 */
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
{ L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
INVALID, /* 11 0 0011 */
{ 2, LD }, /* 11 0 0100: lhzx */
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
{ 4, LD+F }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
{ 4, ST+F }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
{ 8, LD+M }, /* 11 0 1101: lmd */
INVALID, /* 11 0 1110 */
{ 8, ST+M }, /* 11 0 1111: stmd */
{ 4, LD+U }, /* 11 1 0000: lwzux */
INVALID, /* 11 1 0001 */
{ 4, ST+U }, /* 11 1 0010: stwux */
INVALID, /* 11 1 0011 */
{ 2, LD+U }, /* 11 1 0100: lhzux */
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
{ 4, LD+F+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
{ 4, ST+F+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
INVALID, /* 11 1 1110 */
INVALID, /* 11 1 1111 */
};
#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
static inline unsigned make_dsisr(unsigned instr)
{
unsigned dsisr;
/* create a DSISR value from the instruction */
dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */
if ( IS_XFORM(instr) ) {
dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */
dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */
dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */
}
else {
dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */
dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */
if ( IS_DSFORM(instr) ) {
dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */
}
}
return dsisr;
}
int
fix_alignment(struct pt_regs *regs)
{
unsigned int instr, nb, flags;
int t;
unsigned long reg, areg;
unsigned long i;
int ret;
unsigned dsisr;
unsigned char __user *addr;
unsigned char __user *p;
unsigned long __user *lp;
union {
long ll;
double dd;
unsigned char v[8];
struct {
unsigned hi32;
int low32;
} x32;
struct {
unsigned char hi48[6];
short low16;
} x16;
} data;
/*
* Return 1 on success
* Return 0 if unable to handle the interrupt
* Return -EFAULT if data address is bad
*/
dsisr = regs->dsisr;
if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
unsigned int real_instr;
if (__get_user(real_instr, (unsigned int __user *)regs->nip))
return 0;
dsisr = make_dsisr(real_instr);
}
/* extract the operation and registers from the dsisr */
reg = (dsisr >> 5) & 0x1f; /* source/dest register */
areg = dsisr & 0x1f; /* register to update */
instr = (dsisr >> 10) & 0x7f;
instr |= (dsisr >> 13) & 0x60;
/* Lookup the operation in our table */
nb = aligninfo[instr].len;
flags = aligninfo[instr].flags;
/* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar;
/* A size of 0 indicates an instruction we don't support */
/* we also don't support the multiples (lmw, stmw, lmd, stmd) */
if ((nb == 0) || (flags & M))
return 0; /* too hard or invalid instruction */
/*
* Special handling for dcbz
* dcbz may give an alignment exception for accesses to caching inhibited
* storage
*/
if (instr == DCBZ)
addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
/* Verify the address of the operand */
if (user_mode(regs)) {
if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
return -EFAULT; /* bad address */
}
/* Force the fprs into the save area so we can reference them */
if (flags & F) {
if (!user_mode(regs))
return 0;
flush_fp_to_thread(current);
}
/* If we are loading, get the data from user space */
if (flags & LD) {
data.ll = 0;
ret = 0;
p = addr;
switch (nb) {
case 8:
ret |= __get_user(data.v[0], p++);
ret |= __get_user(data.v[1], p++);
ret |= __get_user(data.v[2], p++);
ret |= __get_user(data.v[3], p++);
case 4:
ret |= __get_user(data.v[4], p++);
ret |= __get_user(data.v[5], p++);
case 2:
ret |= __get_user(data.v[6], p++);
ret |= __get_user(data.v[7], p++);
if (ret)
return -EFAULT;
}
}
/* If we are storing, get the data from the saved gpr or fpr */
if (flags & ST) {
if (flags & F) {
if (nb == 4) {
/* Doing stfs, have to convert to single */
preempt_disable();
enable_kernel_fp();
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 06:27:25 +00:00
cvt_df(&current->thread.fpr[reg], (float *)&data.v[4], &current->thread);
disable_kernel_fp();
preempt_enable();
}
else
data.dd = current->thread.fpr[reg];
}
else
data.ll = regs->gpr[reg];
}
/* Swap bytes as needed */
if (flags & SW) {
if (nb == 2)
SWAP(data.v[6], data.v[7]);
else { /* nb must be 4 */
SWAP(data.v[4], data.v[7]);
SWAP(data.v[5], data.v[6]);
}
}
/* Sign extend as needed */
if (flags & SE) {
if ( nb == 2 )
data.ll = data.x16.low16;
else /* nb must be 4 */
data.ll = data.x32.low32;
}
/* If we are loading, move the data to the gpr or fpr */
if (flags & LD) {
if (flags & F) {
if (nb == 4) {
/* Doing lfs, have to convert to double */
preempt_disable();
enable_kernel_fp();
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 06:27:25 +00:00
cvt_fd((float *)&data.v[4], &current->thread.fpr[reg], &current->thread);
disable_kernel_fp();
preempt_enable();
}
else
current->thread.fpr[reg] = data.dd;
}
else
regs->gpr[reg] = data.ll;
}
/* If we are storing, copy the data to the user */
if (flags & ST) {
ret = 0;
p = addr;
switch (nb) {
case 128: /* Special case - must be dcbz */
lp = (unsigned long __user *)p;
for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
ret |= __put_user(0, lp++);
break;
case 8:
ret |= __put_user(data.v[0], p++);
ret |= __put_user(data.v[1], p++);
ret |= __put_user(data.v[2], p++);
ret |= __put_user(data.v[3], p++);
case 4:
ret |= __put_user(data.v[4], p++);
ret |= __put_user(data.v[5], p++);
case 2:
ret |= __put_user(data.v[6], p++);
ret |= __put_user(data.v[7], p++);
}
if (ret)
return -EFAULT;
}
/* Update RA as needed */
if (flags & U) {
regs->gpr[areg] = regs->dar;
}
return 1;
}