kernel-ark/tools/perf/builtin-trace.c

629 lines
13 KiB
C
Raw Normal View History

perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
#include "builtin.h"
#include "util/util.h"
#include "util/cache.h"
#include "util/symbol.h"
#include "util/thread.h"
#include "util/header.h"
#include "util/exec_cmd.h"
#include "util/trace-event.h"
#include "util/session.h"
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
static char const *script_name;
static char const *generate_script_lang;
static int default_start_script(const char *script __unused,
int argc __unused,
const char **argv __unused)
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
{
return 0;
}
static int default_stop_script(void)
{
return 0;
}
static int default_generate_script(const char *outfile __unused)
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
{
return 0;
}
static struct scripting_ops default_scripting_ops = {
.start_script = default_start_script,
.stop_script = default_stop_script,
.process_event = print_event,
.generate_script = default_generate_script,
};
static struct scripting_ops *scripting_ops;
static void setup_scripting(void)
{
/* make sure PERF_EXEC_PATH is set for scripts */
perf_set_argv_exec_path(perf_exec_path());
setup_perl_scripting();
setup_python_scripting();
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
scripting_ops = &default_scripting_ops;
}
static int cleanup_scripting(void)
{
return scripting_ops->stop_script();
}
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
#include "util/parse-options.h"
#include "perf.h"
#include "util/debug.h"
#include "util/trace-event.h"
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
#include "util/exec_cmd.h"
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
static char const *input_name = "perf.data";
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
static int process_sample_event(event_t *event, struct perf_session *session)
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
{
struct sample_data data;
struct thread *thread;
perf trace: Sample timestamps as well Before: perf-21082 [013] 0.000000: sched_wakeup_new: task perf:21083 [120] success=1 [015] perf-21082 [013] 0.000000: sched_migrate_task: task perf:21082 [120] from: 13 to: 15 perf-21082 [013] 0.000000: sched_process_fork: parent perf:21082 child perf:21083 true-21083 [015] 0.000000: sched_wakeup: task migration/15:33 [0] success=1 [015] perf-21082 [013] 0.000000: sched_switch: task perf:21082 [120] (S) ==> swapper:0 [140] true-21083 [015] 0.000000: sched_switch: task perf:21083 [120] (R) ==> migration/15:33 [0] true-21083 [011] 0.000000: sched_process_exit: task true:21083 [120] After: perf-21082 [013] 14674.797613: sched_wakeup_new: task perf:21083 [120] success=1 [015] perf-21082 [013] 14674.797506: sched_migrate_task: task perf:21082 [120] from: 13 to: 15 perf-21082 [013] 14674.797610: sched_process_fork: parent perf:21082 child perf:21083 true-21083 [015] 14674.797725: sched_wakeup: task migration/15:33 [0] success=1 [015] perf-21082 [013] 14674.797722: sched_switch: task perf:21082 [120] (S) ==> swapper:0 [140] true-21083 [015] 14674.797729: sched_switch: task perf:21083 [120] (R) ==> migration/15:33 [0] true-21083 [011] 14674.798159: sched_process_exit: task true:21083 [120] Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03 10:00:22 +00:00
memset(&data, 0, sizeof(data));
data.time = -1;
data.cpu = -1;
data.period = 1;
perf trace: Sample the CPU too Sample, record, parse and print the CPU field - it had all zeroes before. Before (watch the second column, the CPU values): perf-32685 [000] 0.000000: sched_wakeup_new: task perf:32686 [120] success=1 [011] perf-32685 [000] 0.000000: sched_migrate_task: task perf:32685 [120] from: 1 to: 11 perf-32685 [000] 0.000000: sched_process_fork: parent perf:32685 child perf:32686 true-32686 [000] 0.000000: sched_wakeup: task migration/11:25 [0] success=1 [011] true-32686 [000] 0.000000: sched_wakeup: task distccd:12793 [125] success=1 [015] true-32686 [000] 0.000000: sched_wakeup: task distccd:12793 [125] success=1 [015] perf-32685 [000] 0.000000: sched_switch: task perf:32685 [120] (S) ==> swapper:0 [140] true-32686 [000] 0.000000: sched_switch: task perf:32686 [120] (R) ==> migration/11:25 [0] true-32686 [000] 0.000000: sched_switch: task perf:32686 [120] (R) ==> distccd:12793 [125] true-32686 [000] 0.000000: sched_switch: task true:32686 [120] (R) ==> distccd:12793 [125] true-32686 [000] 0.000000: sched_process_exit: task true:32686 [120] true-32686 [000] 0.000000: sched_stat_wait: task: distccd:12793 wait: 6767985949080 [ns] true-32686 [000] 0.000000: sched_stat_wait: task: distccd:12793 wait: 6767986139446 [ns] true-32686 [000] 0.000000: sched_stat_sleep: task: distccd:12793 sleep: 132844 [ns] true-32686 [000] 0.000000: sched_stat_sleep: task: distccd:12793 sleep: 131724 [ns] After: perf-32685 [001] 0.000000: sched_wakeup_new: task perf:32686 [120] success=1 [011] perf-32685 [001] 0.000000: sched_migrate_task: task perf:32685 [120] from: 1 to: 11 perf-32685 [001] 0.000000: sched_process_fork: parent perf:32685 child perf:32686 true-32686 [011] 0.000000: sched_wakeup: task migration/11:25 [0] success=1 [011] true-32686 [015] 0.000000: sched_wakeup: task distccd:12793 [125] success=1 [015] true-32686 [015] 0.000000: sched_wakeup: task distccd:12793 [125] success=1 [015] perf-32685 [001] 0.000000: sched_switch: task perf:32685 [120] (S) ==> swapper:0 [140] true-32686 [011] 0.000000: sched_switch: task perf:32686 [120] (R) ==> migration/11:25 [0] true-32686 [015] 0.000000: sched_switch: task perf:32686 [120] (R) ==> distccd:12793 [125] true-32686 [015] 0.000000: sched_switch: task true:32686 [120] (R) ==> distccd:12793 [125] true-32686 [015] 0.000000: sched_process_exit: task true:32686 [120] true-32686 [015] 0.000000: sched_stat_wait: task: distccd:12793 wait: 6767985949080 [ns] true-32686 [015] 0.000000: sched_stat_wait: task: distccd:12793 wait: 6767986139446 [ns] true-32686 [015] 0.000000: sched_stat_sleep: task: distccd:12793 sleep: 132844 [ns] true-32686 [015] 0.000000: sched_stat_sleep: task: distccd:12793 sleep: 131724 [ns] So we can now see how this workload migrated between CPUs. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-02 18:20:38 +00:00
event__parse_sample(event, session->sample_type, &data);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld\n", event->header.misc,
data.pid, data.tid, data.ip, data.period);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
thread = perf_session__findnew(session, event->ip.pid);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
if (thread == NULL) {
pr_debug("problem processing %d event, skipping it.\n",
event->header.type);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
return -1;
}
if (session->sample_type & PERF_SAMPLE_RAW) {
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
/*
* FIXME: better resolve from pid from the struct trace_entry
* field, although it should be the same than this perf
* event pid
*/
scripting_ops->process_event(data.cpu, data.raw_data,
data.raw_size,
data.time, thread->comm);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
}
session->events_stats.total += data.period;
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
return 0;
}
static struct perf_event_ops event_ops = {
.sample = process_sample_event,
.comm = event__process_comm,
};
static int __cmd_trace(struct perf_session *session)
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
{
return perf_session__process_events(session, &event_ops);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
}
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
struct script_spec {
struct list_head node;
struct scripting_ops *ops;
char spec[0];
};
LIST_HEAD(script_specs);
static struct script_spec *script_spec__new(const char *spec,
struct scripting_ops *ops)
{
struct script_spec *s = malloc(sizeof(*s) + strlen(spec) + 1);
if (s != NULL) {
strcpy(s->spec, spec);
s->ops = ops;
}
return s;
}
static void script_spec__delete(struct script_spec *s)
{
free(s->spec);
free(s);
}
static void script_spec__add(struct script_spec *s)
{
list_add_tail(&s->node, &script_specs);
}
static struct script_spec *script_spec__find(const char *spec)
{
struct script_spec *s;
list_for_each_entry(s, &script_specs, node)
if (strcasecmp(s->spec, spec) == 0)
return s;
return NULL;
}
static struct script_spec *script_spec__findnew(const char *spec,
struct scripting_ops *ops)
{
struct script_spec *s = script_spec__find(spec);
if (s)
return s;
s = script_spec__new(spec, ops);
if (!s)
goto out_delete_spec;
script_spec__add(s);
return s;
out_delete_spec:
script_spec__delete(s);
return NULL;
}
int script_spec_register(const char *spec, struct scripting_ops *ops)
{
struct script_spec *s;
s = script_spec__find(spec);
if (s)
return -1;
s = script_spec__findnew(spec, ops);
if (!s)
return -1;
return 0;
}
static struct scripting_ops *script_spec__lookup(const char *spec)
{
struct script_spec *s = script_spec__find(spec);
if (!s)
return NULL;
return s->ops;
}
static void list_available_languages(void)
{
struct script_spec *s;
fprintf(stderr, "\n");
fprintf(stderr, "Scripting language extensions (used in "
"perf trace -s [spec:]script.[spec]):\n\n");
list_for_each_entry(s, &script_specs, node)
fprintf(stderr, " %-42s [%s]\n", s->spec, s->ops->name);
fprintf(stderr, "\n");
}
static int parse_scriptname(const struct option *opt __used,
const char *str, int unset __used)
{
char spec[PATH_MAX];
const char *script, *ext;
int len;
if (strcmp(str, "lang") == 0) {
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
list_available_languages();
exit(0);
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
}
script = strchr(str, ':');
if (script) {
len = script - str;
if (len >= PATH_MAX) {
fprintf(stderr, "invalid language specifier");
return -1;
}
strncpy(spec, str, len);
spec[len] = '\0';
scripting_ops = script_spec__lookup(spec);
if (!scripting_ops) {
fprintf(stderr, "invalid language specifier");
return -1;
}
script++;
} else {
script = str;
ext = strchr(script, '.');
if (!ext) {
fprintf(stderr, "invalid script extension");
return -1;
}
scripting_ops = script_spec__lookup(++ext);
if (!scripting_ops) {
fprintf(stderr, "invalid script extension");
return -1;
}
}
script_name = strdup(script);
return 0;
}
perf trace/scripting: List available scripts Lists the available perf trace scripts, one per line e.g.: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity To be consistent with the other listing options in perf, the current latency trace option was changed to '-L', and '-l' is now used to access the script listing as: To create the list, it searches each scripts/*/bin directory for files ending with "-report" and reads information found in certain comment lines contained in those shell scripts: - if the comment line starts with "description:", the rest of the line is used as a 'half-line' description. To keep each line in the list to a single line, the description should be limited to 40 characters (the rest of the line contains the script name and args) - if the comment line starts with "args:", the rest of the line names the args the script supports. Required args should be surrounded by <> brackets, optional args by [] brackets. The current scripts in scripts/perl/bin have also been updated with description: and args: comments. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org LKML-Reference: <1260867220-15699-5-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15 08:53:38 +00:00
#define for_each_lang(scripts_dir, lang_dirent, lang_next) \
while (!readdir_r(scripts_dir, &lang_dirent, &lang_next) && \
lang_next) \
if (lang_dirent.d_type == DT_DIR && \
(strcmp(lang_dirent.d_name, ".")) && \
(strcmp(lang_dirent.d_name, "..")))
#define for_each_script(lang_dir, script_dirent, script_next) \
while (!readdir_r(lang_dir, &script_dirent, &script_next) && \
script_next) \
if (script_dirent.d_type != DT_DIR)
#define RECORD_SUFFIX "-record"
#define REPORT_SUFFIX "-report"
struct script_desc {
struct list_head node;
char *name;
char *half_liner;
char *args;
};
LIST_HEAD(script_descs);
static struct script_desc *script_desc__new(const char *name)
{
struct script_desc *s = zalloc(sizeof(*s));
if (s != NULL)
s->name = strdup(name);
return s;
}
static void script_desc__delete(struct script_desc *s)
{
free(s->name);
free(s);
}
static void script_desc__add(struct script_desc *s)
{
list_add_tail(&s->node, &script_descs);
}
static struct script_desc *script_desc__find(const char *name)
{
struct script_desc *s;
list_for_each_entry(s, &script_descs, node)
if (strcasecmp(s->name, name) == 0)
return s;
return NULL;
}
static struct script_desc *script_desc__findnew(const char *name)
{
struct script_desc *s = script_desc__find(name);
if (s)
return s;
s = script_desc__new(name);
if (!s)
goto out_delete_desc;
script_desc__add(s);
return s;
out_delete_desc:
script_desc__delete(s);
return NULL;
}
static char *ends_with(char *str, const char *suffix)
{
size_t suffix_len = strlen(suffix);
char *p = str;
if (strlen(str) > suffix_len) {
p = str + strlen(str) - suffix_len;
if (!strncmp(p, suffix, suffix_len))
return p;
}
return NULL;
}
static char *ltrim(char *str)
{
int len = strlen(str);
while (len && isspace(*str)) {
len--;
str++;
}
return str;
}
static int read_script_info(struct script_desc *desc, const char *filename)
{
char line[BUFSIZ], *p;
FILE *fp;
fp = fopen(filename, "r");
if (!fp)
return -1;
while (fgets(line, sizeof(line), fp)) {
p = ltrim(line);
if (strlen(p) == 0)
continue;
if (*p != '#')
continue;
p++;
if (strlen(p) && *p == '!')
continue;
p = ltrim(p);
if (strlen(p) && p[strlen(p) - 1] == '\n')
p[strlen(p) - 1] = '\0';
if (!strncmp(p, "description:", strlen("description:"))) {
p += strlen("description:");
desc->half_liner = strdup(ltrim(p));
continue;
}
if (!strncmp(p, "args:", strlen("args:"))) {
p += strlen("args:");
desc->args = strdup(ltrim(p));
continue;
}
}
fclose(fp);
return 0;
}
static int list_available_scripts(const struct option *opt __used,
const char *s __used, int unset __used)
{
struct dirent *script_next, *lang_next, script_dirent, lang_dirent;
char scripts_path[MAXPATHLEN];
DIR *scripts_dir, *lang_dir;
char script_path[MAXPATHLEN];
char lang_path[MAXPATHLEN];
struct script_desc *desc;
char first_half[BUFSIZ];
char *script_root;
char *str;
snprintf(scripts_path, MAXPATHLEN, "%s/scripts", perf_exec_path());
scripts_dir = opendir(scripts_path);
if (!scripts_dir)
return -1;
for_each_lang(scripts_dir, lang_dirent, lang_next) {
snprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
lang_dirent.d_name);
lang_dir = opendir(lang_path);
if (!lang_dir)
continue;
for_each_script(lang_dir, script_dirent, script_next) {
script_root = strdup(script_dirent.d_name);
str = ends_with(script_root, REPORT_SUFFIX);
if (str) {
*str = '\0';
desc = script_desc__findnew(script_root);
snprintf(script_path, MAXPATHLEN, "%s/%s",
lang_path, script_dirent.d_name);
read_script_info(desc, script_path);
}
free(script_root);
}
}
fprintf(stdout, "List of available trace scripts:\n");
list_for_each_entry(desc, &script_descs, node) {
sprintf(first_half, "%s %s", desc->name,
desc->args ? desc->args : "");
fprintf(stdout, " %-36s %s\n", first_half,
desc->half_liner ? desc->half_liner : "");
}
exit(0);
}
perf trace/scripting: Add 'record' and 'report' options Allow scripts to be recorded/executed by simply specifying the script root name (the script name minus extension) along with 'record' or 'report' to 'perf trace'. The script names shown by 'perf trace -l' can be directly used to run the command-line contained within the corresponding '-record' and '-report' versions of scripts in the scripts/*/bin directories. For example, to record the trace data needed to run the wakeup-latency.pl script, the user can easily find the name of the corresponding script from the script list and invoke it using 'perf trace record', without having to remember the details of how to do the same thing using the lower-level perf trace command-line options: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity root@tropicana:~# perf trace record wakeup-latency ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.296 MB perf.data (~12931 samples) ] To run the wakeup-latency.pl script using the captured data, change 'record' to 'report' in the command-line: root@tropicana:~# perf trace report wakeup-latency wakeup_latency stats: total_wakeups: 65 avg_wakeup_latency (ns): 22417 min_wakeup_latency (ns): 3470 max_wakeup_latency (ns): 223311 perf trace Perl script stopped If the script takes options, thay can be simply added to the end of the 'report' invocation: root@tropicana:~# perf trace record rw-by-file ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.782 MB perf.data (~34171 samples) ] root@tropicana:~# perf trace report rw-by-file perf file read counts for perf: fd # reads bytes_requested ------ ---------- ----------- 122 1934 1980416 120 1 32 file write counts for perf: fd # writes bytes_written ------ ---------- ----------- 3 4006 280568 perf trace Perl script stopped Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org LKML-Reference: <1260867220-15699-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15 08:53:39 +00:00
static char *get_script_path(const char *script_root, const char *suffix)
{
struct dirent *script_next, *lang_next, script_dirent, lang_dirent;
char scripts_path[MAXPATHLEN];
char script_path[MAXPATHLEN];
DIR *scripts_dir, *lang_dir;
char lang_path[MAXPATHLEN];
char *str, *__script_root;
char *path = NULL;
snprintf(scripts_path, MAXPATHLEN, "%s/scripts", perf_exec_path());
scripts_dir = opendir(scripts_path);
if (!scripts_dir)
return NULL;
for_each_lang(scripts_dir, lang_dirent, lang_next) {
snprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
lang_dirent.d_name);
lang_dir = opendir(lang_path);
if (!lang_dir)
continue;
for_each_script(lang_dir, script_dirent, script_next) {
__script_root = strdup(script_dirent.d_name);
str = ends_with(__script_root, suffix);
if (str) {
*str = '\0';
if (strcmp(__script_root, script_root))
continue;
snprintf(script_path, MAXPATHLEN, "%s/%s",
lang_path, script_dirent.d_name);
path = strdup(script_path);
free(__script_root);
break;
}
free(__script_root);
}
}
return path;
}
static const char * const trace_usage[] = {
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
"perf trace [<options>] <command>",
NULL
};
static const struct option options[] = {
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
perf trace/scripting: List available scripts Lists the available perf trace scripts, one per line e.g.: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity To be consistent with the other listing options in perf, the current latency trace option was changed to '-L', and '-l' is now used to access the script listing as: To create the list, it searches each scripts/*/bin directory for files ending with "-report" and reads information found in certain comment lines contained in those shell scripts: - if the comment line starts with "description:", the rest of the line is used as a 'half-line' description. To keep each line in the list to a single line, the description should be limited to 40 characters (the rest of the line contains the script name and args) - if the comment line starts with "args:", the rest of the line names the args the script supports. Required args should be surrounded by <> brackets, optional args by [] brackets. The current scripts in scripts/perl/bin have also been updated with description: and args: comments. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org LKML-Reference: <1260867220-15699-5-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15 08:53:38 +00:00
OPT_BOOLEAN('L', "Latency", &latency_format,
"show latency attributes (irqs/preemption disabled, etc)"),
perf trace/scripting: List available scripts Lists the available perf trace scripts, one per line e.g.: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity To be consistent with the other listing options in perf, the current latency trace option was changed to '-L', and '-l' is now used to access the script listing as: To create the list, it searches each scripts/*/bin directory for files ending with "-report" and reads information found in certain comment lines contained in those shell scripts: - if the comment line starts with "description:", the rest of the line is used as a 'half-line' description. To keep each line in the list to a single line, the description should be limited to 40 characters (the rest of the line contains the script name and args) - if the comment line starts with "args:", the rest of the line names the args the script supports. Required args should be surrounded by <> brackets, optional args by [] brackets. The current scripts in scripts/perl/bin have also been updated with description: and args: comments. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org LKML-Reference: <1260867220-15699-5-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15 08:53:38 +00:00
OPT_CALLBACK_NOOPT('l', "list", NULL, NULL, "list available scripts",
list_available_scripts),
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
OPT_CALLBACK('s', "script", NULL, "name",
"script file name (lang:script name, script name, or *)",
parse_scriptname),
OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
"generate perf-trace.xx script in specified language"),
OPT_STRING('i', "input", &input_name, "file",
"input file name"),
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
OPT_END()
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
};
int cmd_trace(int argc, const char **argv, const char *prefix __used)
{
struct perf_session *session;
perf trace/scripting: Add 'record' and 'report' options Allow scripts to be recorded/executed by simply specifying the script root name (the script name minus extension) along with 'record' or 'report' to 'perf trace'. The script names shown by 'perf trace -l' can be directly used to run the command-line contained within the corresponding '-record' and '-report' versions of scripts in the scripts/*/bin directories. For example, to record the trace data needed to run the wakeup-latency.pl script, the user can easily find the name of the corresponding script from the script list and invoke it using 'perf trace record', without having to remember the details of how to do the same thing using the lower-level perf trace command-line options: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity root@tropicana:~# perf trace record wakeup-latency ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.296 MB perf.data (~12931 samples) ] To run the wakeup-latency.pl script using the captured data, change 'record' to 'report' in the command-line: root@tropicana:~# perf trace report wakeup-latency wakeup_latency stats: total_wakeups: 65 avg_wakeup_latency (ns): 22417 min_wakeup_latency (ns): 3470 max_wakeup_latency (ns): 223311 perf trace Perl script stopped If the script takes options, thay can be simply added to the end of the 'report' invocation: root@tropicana:~# perf trace record rw-by-file ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.782 MB perf.data (~34171 samples) ] root@tropicana:~# perf trace report rw-by-file perf file read counts for perf: fd # reads bytes_requested ------ ---------- ----------- 122 1934 1980416 120 1 32 file write counts for perf: fd # writes bytes_written ------ ---------- ----------- 3 4006 280568 perf trace Perl script stopped Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org LKML-Reference: <1260867220-15699-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15 08:53:39 +00:00
const char *suffix = NULL;
const char **__argv;
char *script_path;
int i, err;
if (argc >= 2 && strncmp(argv[1], "rec", strlen("rec")) == 0) {
if (argc < 3) {
fprintf(stderr,
"Please specify a record script\n");
return -1;
}
suffix = RECORD_SUFFIX;
}
if (argc >= 2 && strncmp(argv[1], "rep", strlen("rep")) == 0) {
if (argc < 3) {
fprintf(stderr,
"Please specify a report script\n");
return -1;
}
suffix = REPORT_SUFFIX;
}
if (suffix) {
script_path = get_script_path(argv[2], suffix);
if (!script_path) {
fprintf(stderr, "script not found\n");
return -1;
}
__argv = malloc((argc + 1) * sizeof(const char *));
__argv[0] = "/bin/sh";
__argv[1] = script_path;
for (i = 3; i < argc; i++)
__argv[i - 1] = argv[i];
__argv[argc - 1] = NULL;
execvp("/bin/sh", (char **)__argv);
exit(-1);
}
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
setup_scripting();
argc = parse_options(argc, argv, options, trace_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
if (symbol__init() < 0)
return -1;
if (!script_name)
setup_pager();
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
session = perf_session__new(input_name, O_RDONLY, 0);
if (session == NULL)
return -ENOMEM;
if (!perf_session__has_traces(session, "record -R"))
return -EINVAL;
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
if (generate_script_lang) {
struct stat perf_stat;
int input = open(input_name, O_RDONLY);
if (input < 0) {
perror("failed to open file");
exit(-1);
}
err = fstat(input, &perf_stat);
if (err < 0) {
perror("failed to stat file");
exit(-1);
}
if (!perf_stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
}
scripting_ops = script_spec__lookup(generate_script_lang);
if (!scripting_ops) {
fprintf(stderr, "invalid language specifier");
return -1;
}
err = scripting_ops->generate_script("perf-trace");
goto out;
}
if (script_name) {
err = scripting_ops->start_script(script_name, argc, argv);
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
if (err)
goto out;
}
err = __cmd_trace(session);
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
perf_session__delete(session);
perf trace: Add scripting ops Adds an interface, scripting_ops, that when implemented for a particular scripting language enables built-in support for trace stream processing using that language. The interface is designed to enable full-fledged language interpreters to be embedded inside the perf executable and thereby make the full capabilities of the supported languages available for trace processing. See below for details on the interface. This patch also adds a couple command-line options to 'perf trace': The -s option option is used to specify the script to be run. Script names that can be used with -s take the form: [language spec:]scriptname[.ext] Scripting languages register a set of 'language specs' that can be used to specify scripts for the registered languages. The specs can be used either as prefixes or extensions. If [language spec:] is used, the script is taken as a script of the matching language regardless of any extension it might have. If [language spec:] is not used, [.ext] is used to look up the language it corresponds to. Language specs are case insensitive. e.g. Perl scripts can be specified in the following ways: Perl:scriptname pl:scriptname.py # extension ignored PL:scriptname scriptname.pl scriptname.perl The -g [language spec] option gives users an easy starting point for writing scripts in the specified language. Scripting support for a particular language can implement a generate_script() scripting op that outputs an empty (or near-empty) set of handlers for all the events contained in a given perf.data trace file - this option gives users a direct way to access that. Adding support for a scripting language --------------------------------------- The main thing that needs to be done do add support for a new language is to implement the scripting_ops interface: It consists of the following four functions: start_script() stop_script() process_event() generate_script() start_script() is called before any events are processed, and is meant to give the scripting language support an opportunity to set things up to receive events e.g. create and initialize an instance of a language interpreter. stop_script() is called after all events are processed, and is meant to give the scripting language support an opportunity to clean up e.g. destroy the interpreter instance, etc. process_event() is called once for each event and takes as its main parameter a pointer to the binary trace event record to be processed. The implementation is responsible for picking out the binary fields from the event record and sending them to the script handler function associated with that event e.g. a function derived from the event name it's meant to handle e.g. 'sched::sched_switch()'. The 'format' information for trace events can be used to parse the binary data and map it into a form usable by a given scripting language; see the Perl implemention in subsequent patches for one possible way to leverage the existing trace format parsing code in perf and map that info into specific scripting language types. generate_script() should generate a ready-to-run script for the current set of events in the trace, preferably with bodies that print out every field for each event. Again, look at the Perl implementation for clues as to how that can be done. This is an optional, but very useful op. Support for a given language should also add a language-specific setup function and call it from setup_scripting(). The language-specific setup function associates the the scripting ops for that language with one or more 'language specifiers' (see below) using script_spec_register(). When a script name is specified on the command line, the scripting ops associated with the specified language are used to instantiate and use the appropriate interpreter to process the trace stream. In general, it should be relatively easy to add support for a new language, especially if the language implementation supports an interface allowing an interpreter to be 'embedded' inside another program (in this case the containing program will be 'perf trace'). If so, it should be relatively straightforward to translate trace events into invocations of user-defined script functions where e.g. the function name corresponds to the event type and the function parameters correspond to the event fields. The event and field type information exported by the event tracing infrastructure (via the event 'format' files) should be enough to parse and send any piece of trace data to the user script. The easiest way to see how this can be done would be to look at the Perl implementation contained in perf/util/trace-event-perl.c/.h. There are a couple of other things that aren't covered by the scripting_ops or setup interface and are technically optional, but should be implemented if possible. One of these is support for 'flag' and 'symbolic' fields e.g. being able to use more human-readable values such as 'GFP_KERNEL' or HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the Perl implementation to see how this can be done. The other thing is support for 'calling back' into the perf executable to access e.g. uncommon fields not passed by default into handler functions, or any metadata the implementation might want to make available to users via the language interface. Again, see the Perl implementation for examples. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: anton@samba.org Cc: hch@infradead.org LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 07:15:46 +00:00
cleanup_scripting();
out:
return err;
perf tools: Add perf trace This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 14:18:08 +00:00
}