davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9003019192
kernel-ark/net/bridge/br_netlink.c

776 lines
19 KiB
C
Raw Normal View History

[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
/*
* Bridge netlink control interface
*
* Authors:
* Stephen Hemminger <shemminger@osdl.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
bridge: allow creating bridge devices with netlink Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 14:03:32 +00:00
#include <linux/etherdevice.h>
[BRIDGE]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:59:03 +00:00
#include <net/rtnetlink.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
#include <net/net_namespace.h>
[NET]: Modify all rtnetlink methods to only work in the initial namespace (v2) Before I can enable rtnetlink to work in all network namespaces I need to be certain that something won't break. So this patch deliberately disables all of the rtnletlink methods in everything except the initial network namespace. After the methods have been audited this extra check can be disabled. Changes from v1: - added IPv6 addrlabel protection Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 13:21:31 +00:00
#include <net/sock.h>
bridge: offload bridge port attributes to switch asic if feature flag set This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:14 +00:00
#include <net/switchdev.h>
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
#include <uapi/linux/if_bridge.h>
bridge: allow creating bridge devices with netlink Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 14:03:32 +00:00
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
#include "br_private.h"
bridge: master device stuck in no-carrier state forever when in user-stp mode When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-25 00:16:37 +00:00
#include "br_private_stp.h"
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: add vlan info to bridge setlink and dellink notification messages vlan add/deletes are not notified to userspace today. This patch adds vlan info to bridge newlink/dellink notifications generated from the bridge driver. Notifications use the RTEXT_FILTER_BRVLAN_COMPRESSED flag to compress vlans into ranges whereever applicable. The size calculations does not take ranges into account for simplicity. This has the potential for allocating a larger skb than required. There is an existing inconsistency with bridge NEWLINK and DELLINK change notifications. Both generate NEWLINK notifications. Since its always a NEWLINK notification, this patch includes all vlans the port belongs to in the notification. The NEWLINK and DELLINK request messages however only include the vlans to be added and deleted. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 04:21:51 +00:00
static size_t br_get_link_af_size(const struct net_device *dev)
{
struct net_port_vlans *pv;
if (br_port_exists(dev))
pv = nbp_get_vlan_info(br_port_get_rtnl(dev));
else if (dev->priv_flags & IFF_EBRIDGE)
pv = br_get_vlan_info((struct net_bridge *)netdev_priv(dev));
else
return 0;
if (!pv)
return 0;
/* Each VLAN is returned in bridge_vlan_info along with flags */
return pv->num_vlans * nla_total_size(sizeof(struct bridge_vlan_info));
}
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
static inline size_t br_port_info_size(void)
{
return nla_total_size(1) /* IFLA_BRPORT_STATE */
+ nla_total_size(2) /* IFLA_BRPORT_PRIORITY */
+ nla_total_size(4) /* IFLA_BRPORT_COST */
+ nla_total_size(1) /* IFLA_BRPORT_MODE */
bridge: implement BPDU blocking This is Linux bridge implementation of STP protection (Cisco BPDU guard/Juniper BPDU block). BPDU block disables the bridge port if a STP BPDU packet is received. Why would you want to do this? If running Spanning Tree on bridge, hostile devices on the network may send BPDU and cause network failure. Enabling bpdu block will detect and stop this. How to recover the port? The port will be restarted if link is brought down, or removed and reattached. For example: # ip li set dev eth0 down; ip li set dev eth0 up Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:07 +00:00
+ nla_total_size(1) /* IFLA_BRPORT_GUARD */
bridge: add root port blocking This is Linux bridge implementation of root port guard. If BPDU is received from a leaf (edge) port, it should not be elected as root port. Why would you want to do this? If using STP on a bridge and the downstream bridges are not fully trusted; this prevents a hostile guest for rerouting traffic. Why not just use netfilter? Netfilter does not track of follow spanning tree decisions. It would be difficult and error prone to try and mirror STP resolution in netfilter module. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:08 +00:00
+ nla_total_size(1) /* IFLA_BRPORT_PROTECT */
bridge: reserve space for IFLA_BRPORT_FAST_LEAVE The bridge multicast fast leave feature was added sufficient space was not reserved in the netlink message. This means the flag may be lost in netlink events and results of queries. Found by observation while looking up some netlink stuff for discussion with Vlad. Problem introduced by commit c2d3babfafbb9f6629cfb47139758e59a5eb0d80 Author: David S. Miller <davem@davemloft.net> Date: Wed Dec 5 16:24:45 2012 -0500 bridge: implement multicast fast leave Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 13:52:17 +00:00
+ nla_total_size(1) /* IFLA_BRPORT_FAST_LEAVE */
bridge: Add flag to control mac learning. Allow user to control whether mac learning is enabled on the port. By default, mac learning is enabled. Disabling mac learning will cause new dynamic FDB entries to not be created for a particular port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:00 +00:00
+ nla_total_size(1) /* IFLA_BRPORT_LEARNING */
bridge: Add a flag to control unicast packet flood. Add a flag to control flood of unicast traffic. By default, flood is on and the bridge will flood unicast traffic if it doesn't know the destination. When the flag is turned off, unicast traffic without an FDB will not be forwarded to the specified port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:01 +00:00
+ nla_total_size(1) /* IFLA_BRPORT_UNICAST_FLOOD */
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
+ 0;
}
bridge: add vlan info to bridge setlink and dellink notification messages vlan add/deletes are not notified to userspace today. This patch adds vlan info to bridge newlink/dellink notifications generated from the bridge driver. Notifications use the RTEXT_FILTER_BRVLAN_COMPRESSED flag to compress vlans into ranges whereever applicable. The size calculations does not take ranges into account for simplicity. This has the potential for allocating a larger skb than required. There is an existing inconsistency with bridge NEWLINK and DELLINK change notifications. Both generate NEWLINK notifications. Since its always a NEWLINK notification, this patch includes all vlans the port belongs to in the notification. The NEWLINK and DELLINK request messages however only include the vlans to be added and deleted. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 04:21:51 +00:00
static inline size_t br_nlmsg_size(struct net_device *dev)
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(MAX_ADDR_LEN) /* IFLA_ADDRESS */
+ nla_total_size(4) /* IFLA_MASTER */
+ nla_total_size(4) /* IFLA_MTU */
+ nla_total_size(4) /* IFLA_LINK */
+ nla_total_size(1) /* IFLA_OPERSTATE */
bridge: add vlan info to bridge setlink and dellink notification messages vlan add/deletes are not notified to userspace today. This patch adds vlan info to bridge newlink/dellink notifications generated from the bridge driver. Notifications use the RTEXT_FILTER_BRVLAN_COMPRESSED flag to compress vlans into ranges whereever applicable. The size calculations does not take ranges into account for simplicity. This has the potential for allocating a larger skb than required. There is an existing inconsistency with bridge NEWLINK and DELLINK change notifications. Both generate NEWLINK notifications. Since its always a NEWLINK notification, this patch includes all vlans the port belongs to in the notification. The NEWLINK and DELLINK request messages however only include the vlans to be added and deleted. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 04:21:51 +00:00
+ nla_total_size(br_port_info_size()) /* IFLA_PROTINFO */
+ nla_total_size(br_get_link_af_size(dev)); /* IFLA_AF_SPEC */
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
}
static int br_port_fill_attrs(struct sk_buff *skb,
const struct net_bridge_port *p)
{
u8 mode = !!(p->flags & BR_HAIRPIN_MODE);
if (nla_put_u8(skb, IFLA_BRPORT_STATE, p->state) ||
nla_put_u16(skb, IFLA_BRPORT_PRIORITY, p->priority) ||
nla_put_u32(skb, IFLA_BRPORT_COST, p->path_cost) ||
bridge: implement BPDU blocking This is Linux bridge implementation of STP protection (Cisco BPDU guard/Juniper BPDU block). BPDU block disables the bridge port if a STP BPDU packet is received. Why would you want to do this? If running Spanning Tree on bridge, hostile devices on the network may send BPDU and cause network failure. Enabling bpdu block will detect and stop this. How to recover the port? The port will be restarted if link is brought down, or removed and reattached. For example: # ip li set dev eth0 down; ip li set dev eth0 up Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:07 +00:00
nla_put_u8(skb, IFLA_BRPORT_MODE, mode) ||
bridge: add root port blocking This is Linux bridge implementation of root port guard. If BPDU is received from a leaf (edge) port, it should not be elected as root port. Why would you want to do this? If using STP on a bridge and the downstream bridges are not fully trusted; this prevents a hostile guest for rerouting traffic. Why not just use netfilter? Netfilter does not track of follow spanning tree decisions. It would be difficult and error prone to try and mirror STP resolution in netfilter module. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:08 +00:00
nla_put_u8(skb, IFLA_BRPORT_GUARD, !!(p->flags & BR_BPDU_GUARD)) ||
bridge: implement multicast fast leave V3: make it a flag V2: make the toggle per-port Fast leave allows bridge to immediately stops the multicast traffic on the port receives IGMP Leave when IGMP snooping is enabled, no timeouts are observed. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-12-05 21:24:45 +00:00
nla_put_u8(skb, IFLA_BRPORT_PROTECT, !!(p->flags & BR_ROOT_BLOCK)) ||
bridge: Add flag to control mac learning. Allow user to control whether mac learning is enabled on the port. By default, mac learning is enabled. Disabling mac learning will cause new dynamic FDB entries to not be created for a particular port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:00 +00:00
nla_put_u8(skb, IFLA_BRPORT_FAST_LEAVE, !!(p->flags & BR_MULTICAST_FAST_LEAVE)) ||
bridge: Add a flag to control unicast packet flood. Add a flag to control flood of unicast traffic. By default, flood is on and the bridge will flood unicast traffic if it doesn't know the destination. When the flag is turned off, unicast traffic without an FDB will not be forwarded to the specified port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:01 +00:00
nla_put_u8(skb, IFLA_BRPORT_LEARNING, !!(p->flags & BR_LEARNING)) ||
bridge: Add support for IEEE 802.11 Proxy ARP This feature is defined in IEEE Std 802.11-2012, 10.23.13. It allows the AP devices to keep track of the hardware-address-to-IP-address mapping of the mobile devices within the WLAN network. The AP will learn this mapping via observing DHCP, ARP, and NS/NA frames. When a request for such information is made (i.e. ARP request, Neighbor Solicitation), the AP will respond on behalf of the associated mobile device. In the process of doing so, the AP will drop the multicast request frame that was intended to go out to the wireless medium. It was recommended at the LKS workshop to do this implementation in the bridge layer. vxlan.c is already doing something very similar. The DHCP snooping code will be added to the userspace application (hostapd) per the recommendation. This RFC commit is only for IPv4. A similar approach in the bridge layer will be taken for IPv6 as well. Signed-off-by: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-23 21:49:17 +00:00
nla_put_u8(skb, IFLA_BRPORT_UNICAST_FLOOD, !!(p->flags & BR_FLOOD)) ||
nla_put_u8(skb, IFLA_BRPORT_PROXYARP, !!(p->flags & BR_PROXYARP)))
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
return -EMSGSIZE;
return 0;
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
}
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
static int br_fill_ifvlaninfo_range(struct sk_buff *skb, u16 vid_start,
u16 vid_end, u16 flags)
{
struct bridge_vlan_info vinfo;
if ((vid_end - vid_start) > 0) {
/* add range to skb */
vinfo.vid = vid_start;
vinfo.flags = flags | BRIDGE_VLAN_INFO_RANGE_BEGIN;
if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
goto nla_put_failure;
vinfo.flags &= ~BRIDGE_VLAN_INFO_RANGE_BEGIN;
vinfo.vid = vid_end;
vinfo.flags = flags | BRIDGE_VLAN_INFO_RANGE_END;
if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
goto nla_put_failure;
} else {
vinfo.vid = vid_start;
vinfo.flags = flags;
if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
goto nla_put_failure;
}
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int br_fill_ifvlaninfo_compressed(struct sk_buff *skb,
const struct net_port_vlans *pv)
{
u16 vid_range_start = 0, vid_range_end = 0;
bridge: fix uninitialized variable warning net/bridge/br_netlink.c: In function ‘br_fill_ifinfo’: net/bridge/br_netlink.c:146:32: warning: ‘vid_range_flags’ may be used uninitialized in this function [-Wmaybe-uninitialized] err = br_fill_ifvlaninfo_range(skb, vid_range_start, ^ net/bridge/br_netlink.c:108:6: note: ‘vid_range_flags’ was declared here u16 vid_range_flags; Reported-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 00:25:28 +00:00
u16 vid_range_flags = 0;
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
u16 pvid, vid, flags;
int err = 0;
/* Pack IFLA_BRIDGE_VLAN_INFO's for every vlan
* and mark vlan info with begin and end flags
* if vlaninfo represents a range
*/
pvid = br_get_pvid(pv);
for_each_set_bit(vid, pv->vlan_bitmap, VLAN_N_VID) {
flags = 0;
if (vid == pvid)
flags |= BRIDGE_VLAN_INFO_PVID;
if (test_bit(vid, pv->untagged_bitmap))
flags |= BRIDGE_VLAN_INFO_UNTAGGED;
if (vid_range_start == 0) {
goto initvars;
} else if ((vid - vid_range_end) == 1 &&
flags == vid_range_flags) {
vid_range_end = vid;
continue;
} else {
err = br_fill_ifvlaninfo_range(skb, vid_range_start,
vid_range_end,
vid_range_flags);
if (err)
return err;
}
initvars:
vid_range_start = vid;
vid_range_end = vid;
vid_range_flags = flags;
}
bridge: fix uninitialized variable warning net/bridge/br_netlink.c: In function ‘br_fill_ifinfo’: net/bridge/br_netlink.c:146:32: warning: ‘vid_range_flags’ may be used uninitialized in this function [-Wmaybe-uninitialized] err = br_fill_ifvlaninfo_range(skb, vid_range_start, ^ net/bridge/br_netlink.c:108:6: note: ‘vid_range_flags’ was declared here u16 vid_range_flags; Reported-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 00:25:28 +00:00
if (vid_range_start != 0) {
/* Call it once more to send any left over vlans */
err = br_fill_ifvlaninfo_range(skb, vid_range_start,
vid_range_end,
vid_range_flags);
if (err)
return err;
}
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
return 0;
}
static int br_fill_ifvlaninfo(struct sk_buff *skb,
const struct net_port_vlans *pv)
{
struct bridge_vlan_info vinfo;
u16 pvid, vid;
pvid = br_get_pvid(pv);
for_each_set_bit(vid, pv->vlan_bitmap, VLAN_N_VID) {
vinfo.vid = vid;
vinfo.flags = 0;
if (vid == pvid)
vinfo.flags |= BRIDGE_VLAN_INFO_PVID;
if (test_bit(vid, pv->untagged_bitmap))
vinfo.flags |= BRIDGE_VLAN_INFO_UNTAGGED;
if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO,
sizeof(vinfo), &vinfo))
goto nla_put_failure;
}
return 0;
nla_put_failure:
return -EMSGSIZE;
}
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
/*
* Create one netlink message for one interface
* Contains port and master info as well as carrier and bridge state.
*/
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
static int br_fill_ifinfo(struct sk_buff *skb,
const struct net_bridge_port *port,
u32 pid, u32 seq, int event, unsigned int flags,
u32 filter_mask, const struct net_device *dev)
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
{
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
const struct net_bridge *br;
[BRIDGE] netlink: Convert bridge netlink code to new netlink interface Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21 00:20:22 +00:00
struct ifinfomsg *hdr;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
struct nlmsghdr *nlh;
u8 operstate = netif_running(dev) ? dev->operstate : IF_OPER_DOWN;
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
if (port)
br = port->br;
else
br = netdev_priv(dev);
bridge: change console message interface Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:09 +00:00
br_debug(br, "br_fill_info event %d port %s master %s\n",
event, dev->name, br->dev->name);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
[BRIDGE] netlink: Convert bridge netlink code to new netlink interface Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21 00:20:22 +00:00
nlh = nlmsg_put(skb, pid, seq, event, sizeof(*hdr), flags);
if (nlh == NULL)
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
return -EMSGSIZE;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
[BRIDGE] netlink: Convert bridge netlink code to new netlink interface Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21 00:20:22 +00:00
hdr = nlmsg_data(nlh);
hdr->ifi_family = AF_BRIDGE;
hdr->__ifi_pad = 0;
hdr->ifi_type = dev->type;
hdr->ifi_index = dev->ifindex;
hdr->ifi_flags = dev_get_flags(dev);
hdr->ifi_change = 0;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:49:54 +00:00
if (nla_put_string(skb, IFLA_IFNAME, dev->name) ||
nla_put_u32(skb, IFLA_MASTER, br->dev->ifindex) ||
nla_put_u32(skb, IFLA_MTU, dev->mtu) ||
nla_put_u8(skb, IFLA_OPERSTATE, operstate) ||
(dev->addr_len &&
nla_put(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr)) ||
(dev->ifindex != dev->iflink &&
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
nla_put_u32(skb, IFLA_LINK, dev->iflink)))
bridge: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:49:54 +00:00
goto nla_put_failure;
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
if (event == RTM_NEWLINK && port) {
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
struct nlattr *nest
= nla_nest_start(skb, IFLA_PROTINFO | NLA_F_NESTED);
if (nest == NULL || br_port_fill_attrs(skb, port) < 0)
goto nla_put_failure;
nla_nest_end(skb, nest);
}
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
/* Check if the VID information is requested */
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
if ((filter_mask & RTEXT_FILTER_BRVLAN) ||
(filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED)) {
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
const struct net_port_vlans *pv;
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
struct nlattr *af;
int err;
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
if (port)
pv = nbp_get_vlan_info(port);
else
pv = br_get_vlan_info(br);
bridge: Use the correct bit length for bitmap functions in the VLAN code The VLAN code needs to know the length of the per-port VLAN bitmap to perform its most basic operations (retrieving VLAN informations, removing VLANs, forwarding database manipulation, etc). Unfortunately, in the current implementation we are using a macro that indicates the bitmap size in longs in places where the size in bits is expected, which in some cases can cause what appear to be random failures. Use the correct macro. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 08:10:18 +00:00
if (!pv || bitmap_empty(pv->vlan_bitmap, VLAN_N_VID))
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
goto done;
af = nla_nest_start(skb, IFLA_AF_SPEC);
if (!af)
goto nla_put_failure;
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
if (filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED)
err = br_fill_ifvlaninfo_compressed(skb, pv);
else
err = br_fill_ifvlaninfo(skb, pv);
if (err)
goto nla_put_failure;
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
nla_nest_end(skb, af);
}
done:
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:09:00 +00:00
nlmsg_end(skb, nlh);
return 0;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
[BRIDGE] netlink: Convert bridge netlink code to new netlink interface Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21 00:20:22 +00:00
nla_put_failure:
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
}
/*
* Notify listeners of a change in port information
*/
void br_ifinfo_notify(int event, struct net_bridge_port *port)
{
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
struct net *net;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
struct sk_buff *skb;
[BRIDGE]: Convert notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:36:28 +00:00
int err = -ENOBUFS;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (!port)
return;
net = dev_net(port->dev);
bridge: change console message interface Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:09 +00:00
br_debug(port->br, "port %u(%s) event %d\n",
net: cleanup unsigned to unsigned int Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 05:58:06 +00:00
(unsigned int)port->port_no, port->dev->name, event);
bridge: change console message interface Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:09 +00:00
bridge: add vlan info to bridge setlink and dellink notification messages vlan add/deletes are not notified to userspace today. This patch adds vlan info to bridge newlink/dellink notifications generated from the bridge driver. Notifications use the RTEXT_FILTER_BRVLAN_COMPRESSED flag to compress vlans into ranges whereever applicable. The size calculations does not take ranges into account for simplicity. This has the potential for allocating a larger skb than required. There is an existing inconsistency with bridge NEWLINK and DELLINK change notifications. Both generate NEWLINK notifications. Since its always a NEWLINK notification, this patch includes all vlans the port belongs to in the notification. The NEWLINK and DELLINK request messages however only include the vlans to be added and deleted. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 04:21:51 +00:00
skb = nlmsg_new(br_nlmsg_size(port->dev), GFP_ATOMIC);
[BRIDGE]: Convert notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:36:28 +00:00
if (skb == NULL)
goto errout;
bridge: add vlan info to bridge setlink and dellink notification messages vlan add/deletes are not notified to userspace today. This patch adds vlan info to bridge newlink/dellink notifications generated from the bridge driver. Notifications use the RTEXT_FILTER_BRVLAN_COMPRESSED flag to compress vlans into ranges whereever applicable. The size calculations does not take ranges into account for simplicity. This has the potential for allocating a larger skb than required. There is an existing inconsistency with bridge NEWLINK and DELLINK change notifications. Both generate NEWLINK notifications. Since its always a NEWLINK notification, this patch includes all vlans the port belongs to in the notification. The NEWLINK and DELLINK request messages however only include the vlans to be added and deleted. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 04:21:51 +00:00
err = br_fill_ifinfo(skb, port, 0, 0, event, 0,
RTEXT_FILTER_BRVLAN_COMPRESSED, port->dev);
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
if (err < 0) {
/* -EMSGSIZE implies BUG in br_nlmsg_size() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
netlink: change nlmsg_notify() return value logic This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25 07:18:28 +00:00
rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
return;
[BRIDGE]: Convert notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:36:28 +00:00
errout:
bridge: remove unnecessary condition judgment Because err is always negative, remove unnecessary condition judgment. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 05:28:10 +00:00
rtnl_set_sk_err(net, RTNLGRP_LINK, err);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
}
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
/*
* Dump information about all ports, in response to GETLINK
*/
net: create generic bridge ops The PF_BRIDGE:RTM_{GET|SET}LINK nlmsg family and type are currently embedded in the ./net/bridge module. This prohibits them from being used by other bridging devices. One example of this being hardware that has embedded bridging components. In order to use these nlmsg types more generically this patch adds two net_device_ops hooks. One to set link bridge attributes and another to dump the current bride attributes. ndo_bridge_setlink() ndo_bridge_getlink() CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:12:57 +00:00
int br_getlink(struct sk_buff *skb, u32 pid, u32 seq,
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
struct net_device *dev, u32 filter_mask)
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
{
bridge: use br_port_get_rtnl within rtnl lock current br_port_get_rcu is problematic in bridging path (NULL deref). Change these calls in netlink path first. Signed-off-by: Hong Zhiguo <zhiguohong@tencent.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-14 14:42:27 +00:00
struct net_bridge_port *port = br_port_get_rtnl(dev);
net: create generic bridge ops The PF_BRIDGE:RTM_{GET|SET}LINK nlmsg family and type are currently embedded in the ./net/bridge module. This prohibits them from being used by other bridging devices. One example of this being hardware that has embedded bridging components. In order to use these nlmsg types more generically this patch adds two net_device_ops hooks. One to set link bridge attributes and another to dump the current bride attributes. ndo_bridge_setlink() ndo_bridge_getlink() CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:12:57 +00:00
bridge: new function to pack vlans into ranges during gets This patch adds new function to pack vlans into ranges whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE VLAN_INFO_RANGE_END Old vlan packing code is moved to a new function and continues to be called when filter_mask is RTEXT_FILTER_BRVLAN. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:14 +00:00
if (!port && !(filter_mask & RTEXT_FILTER_BRVLAN) &&
!(filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED))
bridge: simplify br_getlink() a bit Static checkers complain that we should maybe set "ret" before we do the "goto out;". They interpret the NULL return from br_port_get_rtnl() as a failure and forgetting to set the error code is a common bug in this situation. The code is confusing but it's actually correct. We are returning zero deliberately. Let's re-write it a bit to be more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-21 09:22:35 +00:00
return 0;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: simplify br_getlink() a bit Static checkers complain that we should maybe set "ret" before we do the "goto out;". They interpret the NULL return from br_port_get_rtnl() as a failure and forgetting to set the error code is a common bug in this situation. The code is confusing but it's actually correct. We are returning zero deliberately. Let's re-write it a bit to be more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-21 09:22:35 +00:00
return br_fill_ifinfo(skb, port, pid, seq, RTM_NEWLINK, NLM_F_MULTI,
filter_mask, dev);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
}
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
static int br_vlan_info(struct net_bridge *br, struct net_bridge_port *p,
int cmd, struct bridge_vlan_info *vinfo)
{
int err = 0;
switch (cmd) {
case RTM_SETLINK:
if (p) {
err = nbp_vlan_add(p, vinfo->vid, vinfo->flags);
if (err)
break;
if (vinfo->flags & BRIDGE_VLAN_INFO_MASTER)
err = br_vlan_add(p->br, vinfo->vid,
vinfo->flags);
} else {
err = br_vlan_add(br, vinfo->vid, vinfo->flags);
}
break;
case RTM_DELLINK:
if (p) {
nbp_vlan_delete(p, vinfo->vid);
if (vinfo->flags & BRIDGE_VLAN_INFO_MASTER)
br_vlan_delete(p->br, vinfo->vid);
} else {
br_vlan_delete(br, vinfo->vid);
}
break;
}
return err;
}
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
static int br_afspec(struct net_bridge *br,
struct net_bridge_port *p,
struct nlattr *af_spec,
int cmd)
{
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
struct bridge_vlan_info *vinfo_start = NULL;
struct bridge_vlan_info *vinfo = NULL;
struct nlattr *attr;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
int err = 0;
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
int rem;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
nla_for_each_nested(attr, af_spec, rem) {
if (nla_type(attr) != IFLA_BRIDGE_VLAN_INFO)
continue;
if (nla_len(attr) != sizeof(struct bridge_vlan_info))
return -EINVAL;
vinfo = nla_data(attr);
if (vinfo->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN) {
if (vinfo_start)
return -EINVAL;
vinfo_start = vinfo;
continue;
}
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
if (vinfo_start) {
struct bridge_vlan_info tmp_vinfo;
int v;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
if (!(vinfo->flags & BRIDGE_VLAN_INFO_RANGE_END))
return -EINVAL;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
if (vinfo->vid <= vinfo_start->vid)
return -EINVAL;
memcpy(&tmp_vinfo, vinfo_start,
sizeof(struct bridge_vlan_info));
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
for (v = vinfo_start->vid; v <= vinfo->vid; v++) {
tmp_vinfo.vid = v;
err = br_vlan_info(br, p, cmd, &tmp_vinfo);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (err)
break;
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
}
vinfo_start = NULL;
} else {
err = br_vlan_info(br, p, cmd, vinfo);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
}
bridge: support for multiple vlans and vlan ranges in setlink and dellink requests This patch changes bridge IFLA_AF_SPEC netlink attribute parser to look for more than one IFLA_BRIDGE_VLAN_INFO attribute. This allows userspace to pack more than one vlan in the setlink msg. The dumps were already sending more than one vlan info in the getlink msg. This patch also adds bridge_vlan_info flags BRIDGE_VLAN_INFO_RANGE_BEGIN and BRIDGE_VLAN_INFO_RANGE_END to indicate start and end of vlan range This patch also deletes unused ifla_br_policy. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-10 15:31:12 +00:00
if (err)
break;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
}
return err;
}
bridge: implement rtnl_link_ops->slave_changelink Allow rtnetlink users to set port info via IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:30 +00:00
static const struct nla_policy br_port_policy[IFLA_BRPORT_MAX + 1] = {
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
[IFLA_BRPORT_STATE] = { .type = NLA_U8 },
[IFLA_BRPORT_COST] = { .type = NLA_U32 },
[IFLA_BRPORT_PRIORITY] = { .type = NLA_U16 },
[IFLA_BRPORT_MODE] = { .type = NLA_U8 },
bridge: implement BPDU blocking This is Linux bridge implementation of STP protection (Cisco BPDU guard/Juniper BPDU block). BPDU block disables the bridge port if a STP BPDU packet is received. Why would you want to do this? If running Spanning Tree on bridge, hostile devices on the network may send BPDU and cause network failure. Enabling bpdu block will detect and stop this. How to recover the port? The port will be restarted if link is brought down, or removed and reattached. For example: # ip li set dev eth0 down; ip li set dev eth0 up Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:07 +00:00
[IFLA_BRPORT_GUARD] = { .type = NLA_U8 },
bridge: add root port blocking This is Linux bridge implementation of root port guard. If BPDU is received from a leaf (edge) port, it should not be elected as root port. Why would you want to do this? If using STP on a bridge and the downstream bridges are not fully trusted; this prevents a hostile guest for rerouting traffic. Why not just use netfilter? Netfilter does not track of follow spanning tree decisions. It would be difficult and error prone to try and mirror STP resolution in netfilter module. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:08 +00:00
[IFLA_BRPORT_PROTECT] = { .type = NLA_U8 },
bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVE Fixes: c2d3babf ("bridge: implement multicast fast leave") Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-26 12:42:19 +00:00
[IFLA_BRPORT_FAST_LEAVE]= { .type = NLA_U8 },
bridge: Add flag to control mac learning. Allow user to control whether mac learning is enabled on the port. By default, mac learning is enabled. Disabling mac learning will cause new dynamic FDB entries to not be created for a particular port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:00 +00:00
[IFLA_BRPORT_LEARNING] = { .type = NLA_U8 },
bridge: Add a flag to control unicast packet flood. Add a flag to control flood of unicast traffic. By default, flood is on and the bridge will flood unicast traffic if it doesn't know the destination. When the flag is turned off, unicast traffic without an FDB will not be forwarded to the specified port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:01 +00:00
[IFLA_BRPORT_UNICAST_FLOOD] = { .type = NLA_U8 },
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
};
/* Change the state of the port and notify spanning tree */
static int br_set_port_state(struct net_bridge_port *p, u8 state)
{
if (state > BR_STATE_BLOCKING)
return -EINVAL;
/* if kernel STP is running, don't allow changes */
if (p->br->stp_enabled == BR_KERNEL_STP)
return -EBUSY;
bridge: respect RFC2863 operational state The bridge link detection should follow the operational state of the lower device, rather than the carrier bit. This allows devices like tunnels that are controlled by userspace control plane to work with bridge STP link management. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-28 18:15:22 +00:00
/* if device is not up, change is not allowed
* if link is not present, only allowable state is disabled
*/
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
if (!netif_running(p->dev) ||
bridge: respect RFC2863 operational state The bridge link detection should follow the operational state of the lower device, rather than the carrier bit. This allows devices like tunnels that are controlled by userspace control plane to work with bridge STP link management. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-28 18:15:22 +00:00
(!netif_oper_up(p->dev) && state != BR_STATE_DISABLED))
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
return -ENETDOWN;
net: bridge: add a br_set_state helper function In preparation for being able to propagate port states to e.g: notifiers or other kernel parts, do not manipulate the port state directly, but instead use a helper function which will allow us to do a bit more than just setting the state. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 23:13:19 +00:00
br_set_state(p, state);
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
br_log_state(p);
br_port_state_selection(p->br);
return 0;
}
/* Set/clear or port flags based on attribute */
static void br_set_port_flag(struct net_bridge_port *p, struct nlattr *tb[],
int attrtype, unsigned long mask)
{
if (tb[attrtype]) {
u8 flag = nla_get_u8(tb[attrtype]);
if (flag)
p->flags |= mask;
else
p->flags &= ~mask;
}
}
/* Process bridge protocol info on port */
static int br_setport(struct net_bridge_port *p, struct nlattr *tb[])
{
int err;
bridge: Keep track of ports capable of automatic discovery. By default, ports on the bridge are capable of automatic discovery of nodes located behind the port. This is accomplished via flooding of unknown traffic (BR_FLOOD) and learning the mac addresses from these packets (BR_LEARNING). If the above functionality is disabled by turning off these flags, the port requires static configuration in the form of static FDB entries to function properly. This patch adds functionality to keep track of all ports capable of automatic discovery. This will later be used to control promiscuity settings. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:16 +00:00
unsigned long old_flags = p->flags;
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_MODE, BR_HAIRPIN_MODE);
bridge: implement BPDU blocking This is Linux bridge implementation of STP protection (Cisco BPDU guard/Juniper BPDU block). BPDU block disables the bridge port if a STP BPDU packet is received. Why would you want to do this? If running Spanning Tree on bridge, hostile devices on the network may send BPDU and cause network failure. Enabling bpdu block will detect and stop this. How to recover the port? The port will be restarted if link is brought down, or removed and reattached. For example: # ip li set dev eth0 down; ip li set dev eth0 up Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:07 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_GUARD, BR_BPDU_GUARD);
bridge: implement multicast fast leave V3: make it a flag V2: make the toggle per-port Fast leave allows bridge to immediately stops the multicast traffic on the port receives IGMP Leave when IGMP snooping is enabled, no timeouts are observed. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-12-05 21:24:45 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_FAST_LEAVE, BR_MULTICAST_FAST_LEAVE);
bridge: Add support for setting BR_ROOT_BLOCK flag. Most of the support was already there. The only thing that was missing was the call to set the flag. Add this call. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15 06:39:12 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK);
bridge: Add flag to control mac learning. Allow user to control whether mac learning is enabled on the port. By default, mac learning is enabled. Disabling mac learning will cause new dynamic FDB entries to not be created for a particular port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:00 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_LEARNING, BR_LEARNING);
bridge: Add a flag to control unicast packet flood. Add a flag to control flood of unicast traffic. By default, flood is on and the bridge will flood unicast traffic if it doesn't know the destination. When the flag is turned off, unicast traffic without an FDB will not be forwarded to the specified port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 14:08:01 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_UNICAST_FLOOD, BR_FLOOD);
bridge: Add support for IEEE 802.11 Proxy ARP This feature is defined in IEEE Std 802.11-2012, 10.23.13. It allows the AP devices to keep track of the hardware-address-to-IP-address mapping of the mobile devices within the WLAN network. The AP will learn this mapping via observing DHCP, ARP, and NS/NA frames. When a request for such information is made (i.e. ARP request, Neighbor Solicitation), the AP will respond on behalf of the associated mobile device. In the process of doing so, the AP will drop the multicast request frame that was intended to go out to the wireless medium. It was recommended at the LKS workshop to do this implementation in the bridge layer. vxlan.c is already doing something very similar. The DHCP snooping code will be added to the userspace application (hostapd) per the recommendation. This RFC commit is only for IPv4. A similar approach in the bridge layer will be taken for IPv6 as well. Signed-off-by: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-23 21:49:17 +00:00
br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP, BR_PROXYARP);
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
if (tb[IFLA_BRPORT_COST]) {
err = br_stp_set_path_cost(p, nla_get_u32(tb[IFLA_BRPORT_COST]));
if (err)
return err;
}
if (tb[IFLA_BRPORT_PRIORITY]) {
err = br_stp_set_port_priority(p, nla_get_u16(tb[IFLA_BRPORT_PRIORITY]));
if (err)
return err;
}
if (tb[IFLA_BRPORT_STATE]) {
err = br_set_port_state(p, nla_get_u8(tb[IFLA_BRPORT_STATE]));
if (err)
return err;
}
bridge: Keep track of ports capable of automatic discovery. By default, ports on the bridge are capable of automatic discovery of nodes located behind the port. This is accomplished via flooding of unknown traffic (BR_FLOOD) and learning the mac addresses from these packets (BR_LEARNING). If the above functionality is disabled by turning off these flags, the port requires static configuration in the form of static FDB entries to function properly. This patch adds functionality to keep track of all ports capable of automatic discovery. This will later be used to control promiscuity settings. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:16 +00:00
br_port_flags_change(p, old_flags ^ p->flags);
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
return 0;
}
/* Change state and parameters on port. */
bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellink bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:12 +00:00
int br_setlink(struct net_device *dev, struct nlmsghdr *nlh, u16 flags)
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
{
[BRIDGE] netlink: Convert bridge netlink code to new netlink interface Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21 00:20:22 +00:00
struct nlattr *protinfo;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
struct nlattr *afspec;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
struct net_bridge_port *p;
bridge: make buffer larger in br_setlink() We pass IFLA_BRPORT_MAX to nla_parse_nested() so we need IFLA_BRPORT_MAX + 1 elements. Also Smatch complains that we read past the end of the array when in br_set_port_flag() when it's called with IFLA_BRPORT_FAST_LEAVE. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07 01:10:46 +00:00
struct nlattr *tb[IFLA_BRPORT_MAX + 1];
bridge: offload bridge port attributes to switch asic if feature flag set This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:14 +00:00
int err = 0, ret_offload = 0;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: remove unused variable ifm Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 06:21:22 +00:00
protinfo = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_PROTINFO);
afspec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (!protinfo && !afspec)
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
return 0;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: add RCU annotations to bridge port lookup br_port_get() renamed to br_port_get_rtnl() to make clear RTNL is held. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 06:38:14 +00:00
p = br_port_get_rtnl(dev);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
/* We want to accept dev as bridge itself if the AF_SPEC
net: more spelling fixes Various spelling fixes in networking stack Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-08 20:15:44 +00:00
* is set to see if someone is setting vlan info on the bridge
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
*/
bridge: avoid br_ifinfo_notify when nothing changed When neither IFF_BRIDGE nor IFF_BRIDGE_PORT is set, and afspec == NULL but protinfo != NULL, we run into "if (err == 0) br_ifinfo_notify(RTM_NEWLINK, p);" with random value in ret. Thanks to Sergei for pointing out the error in commit comments. Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24 03:26:47 +00:00
if (!p && !afspec)
bridge: fix RCU races with bridge port The macro br_port_exists() is not enough protection when only RCU is being used. There is a tiny race where other CPU has cleared port handler hook, but is bridge port flag might still be set. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 06:38:13 +00:00
return -EINVAL;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (p && protinfo) {
if (protinfo->nla_type & NLA_F_NESTED) {
err = nla_parse_nested(tb, IFLA_BRPORT_MAX,
bridge: implement rtnl_link_ops->slave_changelink Allow rtnetlink users to set port info via IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:30 +00:00
protinfo, br_port_policy);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (err)
return err;
spin_lock_bh(&p->br->lock);
err = br_setport(p, tb);
spin_unlock_bh(&p->br->lock);
} else {
net: more spelling fixes Various spelling fixes in networking stack Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-08 20:15:44 +00:00
/* Binary compatibility with old RSTP */
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (nla_len(protinfo) < sizeof(u8))
return -EINVAL;
spin_lock_bh(&p->br->lock);
err = br_set_port_state(p, nla_get_u8(protinfo));
spin_unlock_bh(&p->br->lock);
}
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
if (err)
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
goto out;
}
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (afspec) {
err = br_afspec((struct net_bridge *)netdev_priv(dev), p,
afspec, RTM_SETLINK);
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
}
bridge: master device stuck in no-carrier state forever when in user-stp mode When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-25 00:16:37 +00:00
bridge: add missing bridge port check for offloads This patch fixes a missing bridge port check caught by smatch. setlink/dellink of attributes like vlans can come for a bridge device and there is no need to offload those today. So, this patch adds a bridge port check. (In these cases however, the BRIDGE_SELF flags will always be set and we may not hit a problem with the current code). smatch complaint: The patch 68e331c785b8: "bridge: offload bridge port attributes to switch asic if feature flag set" from Jan 29, 2015, leads to the following Smatch complaint: net/bridge/br_netlink.c:552 br_setlink() error: we previously assumed 'p' could be null (see line 518) net/bridge/br_netlink.c 517 518 if (p && protinfo) { ^ Check for NULL. Reported-By: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06 06:24:45 +00:00
if (p && !(flags & BRIDGE_FLAGS_SELF)) {
bridge: offload bridge port attributes to switch asic if feature flag set This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:14 +00:00
/* set bridge attributes in hardware if supported
*/
ret_offload = netdev_switch_port_bridge_setlink(dev, nlh,
flags);
if (ret_offload && ret_offload != -EOPNOTSUPP)
br_warn(p->br, "error setting attrs on port %u(%s)\n",
(unsigned int)p->port_no, p->dev->name);
}
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
if (err == 0)
br_ifinfo_notify(RTM_NEWLINK, p);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
out:
bridge: bridge port parameters over netlink Expose bridge port parameter over netlink. By switching to a nested message, this can be used for other bridge parameters. This changes IFLA_PROTINFO attribute from one byte to a full nested set of attributes. This is safe for application interface because the old message used IFLA_PROTINFO and new one uses IFLA_PROTINFO | NLA_F_NESTED. The code adapts to old format requests, and therefore stays compatible with user mode RSTP daemon. Since the type field for nested and unnested attributes are different, and the old code in libnetlink doesn't do the mask, it is also safe to use with old versions of bridge monitor command. Note: although mode is only a boolean, treating it as a full byte since in the future someone will probably want to add more values (like macvlan has). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 07:53:05 +00:00
return err;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
}
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
/* Delete port information */
bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellink bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:12 +00:00
int br_dellink(struct net_device *dev, struct nlmsghdr *nlh, u16 flags)
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
{
struct nlattr *afspec;
struct net_bridge_port *p;
bridge: offload bridge port attributes to switch asic if feature flag set This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:14 +00:00
int err = 0, ret_offload = 0;
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: remove unused variable ifm Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 06:21:22 +00:00
afspec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
if (!afspec)
return 0;
p = br_port_get_rtnl(dev);
/* We want to accept dev as bridge itself as well */
if (!p && !(dev->priv_flags & IFF_EBRIDGE))
return -EINVAL;
err = br_afspec((struct net_bridge *)netdev_priv(dev), p,
afspec, RTM_DELLINK);
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
if (err == 0)
/* Send RTM_NEWLINK because userspace
* expects RTM_NEWLINK for vlan dels
*/
br_ifinfo_notify(RTM_NEWLINK, p);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
bridge: add missing bridge port check for offloads This patch fixes a missing bridge port check caught by smatch. setlink/dellink of attributes like vlans can come for a bridge device and there is no need to offload those today. So, this patch adds a bridge port check. (In these cases however, the BRIDGE_SELF flags will always be set and we may not hit a problem with the current code). smatch complaint: The patch 68e331c785b8: "bridge: offload bridge port attributes to switch asic if feature flag set" from Jan 29, 2015, leads to the following Smatch complaint: net/bridge/br_netlink.c:552 br_setlink() error: we previously assumed 'p' could be null (see line 518) net/bridge/br_netlink.c 517 518 if (p && protinfo) { ^ Check for NULL. Reported-By: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06 06:24:45 +00:00
if (p && !(flags & BRIDGE_FLAGS_SELF)) {
bridge: offload bridge port attributes to switch asic if feature flag set This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 06:40:14 +00:00
/* del bridge attributes in hardware
*/
ret_offload = netdev_switch_port_bridge_dellink(dev, nlh,
flags);
if (ret_offload && ret_offload != -EOPNOTSUPP)
br_warn(p->br, "error deleting attrs on port %u (%s)\n",
(unsigned int)p->port_no, p->dev->name);
}
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:12 +00:00
return err;
}
bridge: allow creating bridge devices with netlink Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 14:03:32 +00:00
static int br_validate(struct nlattr *tb[], struct nlattr *data[])
{
if (tb[IFLA_ADDRESS]) {
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
return -EINVAL;
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
return -EADDRNOTAVAIL;
}
return 0;
}
bridge: Handle IFLA_ADDRESS correctly when creating bridge device When bridge device is created with IFLA_ADDRESS, we are not calling br_stp_change_bridge_id(), which leads to incorrect local fdb management and bridge id calculation, and prevents us from receiving frames on the bridge device. Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-25 08:01:18 +00:00
static int br_dev_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
struct net_bridge *br = netdev_priv(dev);
if (tb[IFLA_ADDRESS]) {
spin_lock_bh(&br->lock);
br_stp_change_bridge_id(br, nla_data(tb[IFLA_ADDRESS]));
spin_unlock_bh(&br->lock);
}
return register_netdevice(dev);
}
bridge: implement rtnl_link_ops->slave_changelink Allow rtnetlink users to set port info via IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:30 +00:00
static int br_port_slave_changelink(struct net_device *brdev,
struct net_device *dev,
struct nlattr *tb[],
struct nlattr *data[])
{
if (!data)
return 0;
return br_setport(br_port_get_rtnl(dev), data);
}
bridge: implement rtnl_link_ops->get_slave_size and rtnl_link_ops->fill_slave_info Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:29 +00:00
static int br_port_fill_slave_info(struct sk_buff *skb,
const struct net_device *brdev,
const struct net_device *dev)
{
return br_port_fill_attrs(skb, br_port_get_rtnl(dev));
}
static size_t br_port_get_slave_size(const struct net_device *brdev,
const struct net_device *dev)
{
return br_port_info_size();
}
bridge: implement rtnl_link_ops->changelink Allow rtnetlink users to set bridge master info via IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:32 +00:00
static const struct nla_policy br_policy[IFLA_BR_MAX + 1] = {
[IFLA_BR_FORWARD_DELAY] = { .type = NLA_U32 },
[IFLA_BR_HELLO_TIME] = { .type = NLA_U32 },
[IFLA_BR_MAX_AGE] = { .type = NLA_U32 },
};
static int br_changelink(struct net_device *brdev, struct nlattr *tb[],
struct nlattr *data[])
{
struct net_bridge *br = netdev_priv(brdev);
int err;
if (!data)
return 0;
if (data[IFLA_BR_FORWARD_DELAY]) {
err = br_set_forward_delay(br, nla_get_u32(data[IFLA_BR_FORWARD_DELAY]));
if (err)
return err;
}
if (data[IFLA_BR_HELLO_TIME]) {
err = br_set_hello_time(br, nla_get_u32(data[IFLA_BR_HELLO_TIME]));
if (err)
return err;
}
if (data[IFLA_BR_MAX_AGE]) {
err = br_set_max_age(br, nla_get_u32(data[IFLA_BR_MAX_AGE]));
if (err)
return err;
}
return 0;
}
bridge: implement rtnl_link_ops->get_size and rtnl_link_ops->fill_info Allow rtnetlink users to get bridge master info in IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:31 +00:00
static size_t br_get_size(const struct net_device *brdev)
{
return nla_total_size(sizeof(u32)) + /* IFLA_BR_FORWARD_DELAY */
nla_total_size(sizeof(u32)) + /* IFLA_BR_HELLO_TIME */
nla_total_size(sizeof(u32)) + /* IFLA_BR_MAX_AGE */
0;
}
static int br_fill_info(struct sk_buff *skb, const struct net_device *brdev)
{
struct net_bridge *br = netdev_priv(brdev);
u32 forward_delay = jiffies_to_clock_t(br->forward_delay);
u32 hello_time = jiffies_to_clock_t(br->hello_time);
u32 age_time = jiffies_to_clock_t(br->max_age);
if (nla_put_u32(skb, IFLA_BR_FORWARD_DELAY, forward_delay) ||
nla_put_u32(skb, IFLA_BR_HELLO_TIME, hello_time) ||
nla_put_u32(skb, IFLA_BR_MAX_AGE, age_time))
return -EMSGSIZE;
return 0;
}
net: mark some potential candidates __read_mostly They are all either written once or extremly rarely (e.g. from init code), so we can move them to the .data..read_mostly section. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29 11:15:03 +00:00
static struct rtnl_af_ops br_af_ops __read_mostly = {
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
.family = AF_BRIDGE,
.get_link_af_size = br_get_link_af_size,
};
bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 05:48:45 +00:00
struct rtnl_link_ops br_link_ops __read_mostly = {
bridge: implement rtnl_link_ops->get_slave_size and rtnl_link_ops->fill_slave_info Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:29 +00:00
.kind = "bridge",
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
bridge: implement rtnl_link_ops->changelink Allow rtnetlink users to set bridge master info via IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:32 +00:00
.maxtype = IFLA_BRPORT_MAX,
.policy = br_policy,
bridge: implement rtnl_link_ops->get_slave_size and rtnl_link_ops->fill_slave_info Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:29 +00:00
.validate = br_validate,
.newlink = br_dev_newlink,
bridge: implement rtnl_link_ops->changelink Allow rtnetlink users to set bridge master info via IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:32 +00:00
.changelink = br_changelink,
bridge: implement rtnl_link_ops->get_slave_size and rtnl_link_ops->fill_slave_info Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:29 +00:00
.dellink = br_dev_delete,
bridge: implement rtnl_link_ops->get_size and rtnl_link_ops->fill_info Allow rtnetlink users to get bridge master info in IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:31 +00:00
.get_size = br_get_size,
.fill_info = br_fill_info,
bridge: implement rtnl_link_ops->slave_changelink Allow rtnetlink users to set port info via IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:30 +00:00
.slave_maxtype = IFLA_BRPORT_MAX,
.slave_policy = br_port_policy,
.slave_changelink = br_port_slave_changelink,
bridge: implement rtnl_link_ops->get_slave_size and rtnl_link_ops->fill_slave_info Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 13:51:29 +00:00
.get_slave_size = br_port_get_slave_size,
.fill_slave_info = br_port_fill_slave_info,
bridge: allow creating bridge devices with netlink Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 14:03:32 +00:00
};
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
[BRIDGE]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:59:03 +00:00
int __init br_netlink_init(void)
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
{
bridge: Correctly unregister MDB rtnetlink handlers Commit 63233159fd4e596568f5f168ecb0879b61631d47: bridge: Do not unregister all PF_BRIDGE rtnl operations introduced a bug where a removal of a single bridge from a multi-bridge system would remove MDB netlink handlers. The handlers should only be removed once all bridges are gone, but since we don't keep track of the number of bridge interfaces, it's simpler to do it when the bridge module is unloaded. To make it consistent, move the registration code into module initialization code path. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02 09:41:25 +00:00
int err;
br_mdb_init();
netlink: cleanup rntl_af_register The function __rtnl_af_register is never called outside this code, and the return value is always 0. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30 18:41:32 +00:00
rtnl_af_register(&br_af_ops);
bridge: Correctly unregister MDB rtnetlink handlers Commit 63233159fd4e596568f5f168ecb0879b61631d47: bridge: Do not unregister all PF_BRIDGE rtnl operations introduced a bug where a removal of a single bridge from a multi-bridge system would remove MDB netlink handlers. The handlers should only be removed once all bridges are gone, but since we don't keep track of the number of bridge interfaces, it's simpler to do it when the bridge module is unloaded. To make it consistent, move the registration code into module initialization code path. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02 09:41:25 +00:00
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
err = rtnl_link_register(&br_link_ops);
if (err)
goto out_af;
bridge: Correctly unregister MDB rtnetlink handlers Commit 63233159fd4e596568f5f168ecb0879b61631d47: bridge: Do not unregister all PF_BRIDGE rtnl operations introduced a bug where a removal of a single bridge from a multi-bridge system would remove MDB netlink handlers. The handlers should only be removed once all bridges are gone, but since we don't keep track of the number of bridge interfaces, it's simpler to do it when the bridge module is unloaded. To make it consistent, move the registration code into module initialization code path. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02 09:41:25 +00:00
return 0;
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
out_af:
rtnl_af_unregister(&br_af_ops);
bridge: Correctly unregister MDB rtnetlink handlers Commit 63233159fd4e596568f5f168ecb0879b61631d47: bridge: Do not unregister all PF_BRIDGE rtnl operations introduced a bug where a removal of a single bridge from a multi-bridge system would remove MDB netlink handlers. The handlers should only be removed once all bridges are gone, but since we don't keep track of the number of bridge interfaces, it's simpler to do it when the bridge module is unloaded. To make it consistent, move the registration code into module initialization code path. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02 09:41:25 +00:00
br_mdb_uninit();
return err;
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
}
netfilter: bridge: move br_netfilter out of the core Jesper reported that br_netfilter always registers the hooks since this is part of the bridge core. This harms performance for people that don't need this. This patch modularizes br_netfilter so it can be rmmod'ed, thus, the hooks can be unregistered. I think the bridge netfilter should have been a separated module since the beginning, Patrick agreed on that. Note that this is breaking compatibility for users that expect that bridge netfilter is going to be available after explicitly 'modprobe bridge' or via automatic load through brctl. However, the damage can be easily undone by modprobing br_netfilter. The bridge core also spots a message to provide a clue to people that didn't notice that this has been deprecated. On top of that, the plan is that nftables will not rely on this software layer, but integrate the connection tracking into the bridge layer to enable stateful filtering and NAT, which is was bridge netfilter users seem to require. This patch still keeps the fake_dst_ops in the bridge core, since this is required by when the bridge port is initialized. So we can safely modprobe/rmmod br_netfilter anytime. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Florian Westphal <fw@strlen.de>
2014-09-18 09:29:03 +00:00
void br_netlink_fini(void)
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
{
bridge: Correctly unregister MDB rtnetlink handlers Commit 63233159fd4e596568f5f168ecb0879b61631d47: bridge: Do not unregister all PF_BRIDGE rtnl operations introduced a bug where a removal of a single bridge from a multi-bridge system would remove MDB netlink handlers. The handlers should only be removed once all bridges are gone, but since we don't keep track of the number of bridge interfaces, it's simpler to do it when the bridge module is unloaded. To make it consistent, move the registration code into module initialization code path. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02 09:41:25 +00:00
br_mdb_uninit();
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 12:00:13 +00:00
rtnl_af_unregister(&br_af_ops);
bridge: allow creating bridge devices with netlink Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 14:03:32 +00:00
rtnl_link_unregister(&br_link_ops);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
}
Reference in New Issue Copy Permalink