davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
89cb3ddbe7
kernel-ark/drivers/pwm/Kconfig

442 lines
12 KiB
Plaintext
Raw Normal View History

pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 08:40:40 +00:00
menuconfig PWM
pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-16 06:01:21 +00:00
bool "Pulse-Width Modulation (PWM) Support"
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 08:40:40 +00:00
help
pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-16 06:01:21 +00:00
Generic Pulse-Width Modulation (PWM) support.
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 08:40:40 +00:00
pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-16 06:01:21 +00:00
In Pulse-Width Modulation, a variation of the width of pulses
in a rectangular pulse signal is used as a means to alter the
average power of the signal. Applications include efficient
power delivery and voltage regulation. In computer systems,
PWMs are commonly used to control fans or the brightness of
display backlights.
This framework provides a generic interface to PWM devices
within the Linux kernel. On the driver side it provides an API
to register and unregister a PWM chip, an abstraction of a PWM
controller, that supports one or more PWM devices. Client
drivers can request PWM devices and use the generic framework
to configure as well as enable and disable them.
This generic framework replaces the legacy PWM framework which
allows only a single driver implementing the required API. Not
all legacy implementations have been ported to the framework
yet. The framework provides an API that is backward compatible
with the legacy framework so that existing client drivers
continue to work as expected.
If unsure, say no.
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 08:40:40 +00:00
if PWM
pwm: Add sysfs interface Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-11 17:38:59 +00:00
config PWM_SYSFS
bool
default y if SYSFS
pwm: Move AB8500 PWM driver to PWM framework This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arun Murthy <arun.murthy@stericsson.com>
2012-08-31 09:46:24 +00:00
config PWM_AB8500
tristate "AB8500 PWM support"
depends on AB8500_CORE && ARCH_U8500
help
Generic PWM framework driver for Analog Baseband AB8500.
To compile this driver as a module, choose M here: the module
will be called pwm-ab8500.
pwm: atmel-pwm: Add Atmel PWM controller driver Add a PWM framework driver for the PWM controller found on Atmel SoCs. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [thierry.reding: coding style and other minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-13 06:41:49 +00:00
config PWM_ATMEL
tristate "Atmel PWM support"
PWM: atmel: allow building for AVR32 The Atmel PWM IP can be found on avr32 chips. This allows selecting and building the driver on avr32. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-28 23:20:10 +00:00
depends on ARCH_AT91 || AVR32
pwm: atmel-pwm: Add Atmel PWM controller driver Add a PWM framework driver for the PWM controller found on Atmel SoCs. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [thierry.reding: coding style and other minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-13 06:41:49 +00:00
help
Generic PWM framework driver for Atmel SoC.
To compile this driver as a module, choose M here: the module
will be called pwm-atmel.
pwm: add support for atmel-hlcdc-pwm device The HLCDC IP available in some Atmel SoCs (i.e. at91sam9x5, at91sam9n12 or sama5d3 families for instance) provides a PWM device. This driver add support for a PWM chip exposing a single PWM device (which will most likely be used to drive a backlight device). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-07 13:38:14 +00:00
config PWM_ATMEL_HLCDC_PWM
tristate "Atmel HLCDC PWM support"
depends on MFD_ATMEL_HLCDC
pwm: atmel-hlcdc: Depend on HAVE_CLK The include/linux/clk.h header defines dummy implementations for the various clk_*() functions if HAVE_CLK is not selected to improve build coverage in randconfig builds. The dummy implementation of clk_get_rate() returns 0, which causes the Atmel HLCDC PWM driver's atmel_hlcdc_pwm_config() implementation to end up calling: do_div(clk_period_ns, 0) On x86, do_div(n, base) will end up evaluating to this: n >>= ilog2(base) with base = 0, the implementation of ilog2() will call ____ilog2_NaN(), which is purposely undefined and results in a linker failure: ERROR: "____ilog2_NaN" [drivers/pwm/pwm-atmel-hlcdc.ko] undefined! The implementation of do_div() checks that base is a power of 2 before calling ilog2(). The compiler doesn't optimize this away, presumably because is_power_of_2() is an inline function and the compiler doesn't or can't inspect it closely enough. ilog2() being a macro it still ends up generating the ____ilog2_NaN() because of the constant 0. The root of the problem is that the driver really should be checking before possibly dividing by zero. That should eventually be fixed, but for now just assume that the clock runs at a sensible frequency when available. Reported-by: Jim Davis <jim.epost@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-18 09:09:42 +00:00
depends on HAVE_CLK
pwm: add support for atmel-hlcdc-pwm device The HLCDC IP available in some Atmel SoCs (i.e. at91sam9x5, at91sam9n12 or sama5d3 families for instance) provides a PWM device. This driver add support for a PWM chip exposing a single PWM device (which will most likely be used to drive a backlight device). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-07 13:38:14 +00:00
help
Generic PWM framework driver for the PWM output of the HLCDC
(Atmel High-end LCD Controller). This PWM output is mainly used
to control the LCD backlight.
To compile this driver as a module, choose M here: the module
will be called pwm-atmel-hlcdc.
pwm: atmel: add Timer Counter Block PWM driver This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-08 15:36:42 +00:00
config PWM_ATMEL_TCB
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 08:19:55 +00:00
tristate "Atmel TC Block PWM support"
pwm: atmel: add Timer Counter Block PWM driver This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-08 15:36:42 +00:00
depends on ATMEL_TCLIB && OF
help
Generic PWM framework driver for Atmel Timer Counter Block.
A Timer Counter Block provides 6 PWM devices grouped by 2.
Devices in a given group must have the same period.
To compile this driver as a module, choose M here: the module
will be called pwm-atmel-tcb.
pwm: kona: Introduce Kona PWM controller support Add support for the six-channel Kona PWM controller found on Broadcom mobile SoCs like bcm281xx. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-04-25 18:31:12 +00:00
config PWM_BCM_KONA
tristate "Kona PWM support"
depends on ARCH_BCM_MOBILE
help
Generic PWM framework driver for Broadcom Kona PWM block.
To compile this driver as a module, choose M here: the module
will be called pwm-bcm-kona.
pwm: Add BCM2835 PWM driver Add PWM driver for Broadcom BCM2835 processor (Raspberry Pi) Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-08 10:14:32 +00:00
config PWM_BCM2835
tristate "BCM2835 PWM support"
depends on ARCH_BCM2835
help
PWM framework driver for BCM2835 controller (Raspberry Pi)
To compile this driver as a module, choose M here: the module
will be called pwm-bcm2835.
pwm: Add support for the Berlin PWM controller Add a PWM controller driver for the Marvell Berlin SoCs. This PWM controller has 4 channels. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-10-02 14:59:47 +00:00
config PWM_BERLIN
tristate "Marvell Berlin PWM support"
depends on ARCH_BERLIN
help
PWM framework driver for Marvell Berlin SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-berlin.
pwm: Move Blackfin PWM driver to PWM framework This commit moves the Blackfin PWM driver to the drivers/pwm sub- directory and converts it to register with the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-01-02 19:53:50 +00:00
config PWM_BFIN
tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS
help
Generic PWM framework driver for Blackfin.
To compile this driver as a module, choose M here: the module
will be called pwm-bfin.
pwm: Add Broadcom BCM7038 PWM controller support Add support for the BCM7038-style PWM controller found in all BCM7xxx STB SoCs. This controller has a hardcoded 2 channels per controller, and cascades a variable frequency generator on top of a fixed frequency generator which offers a range of a 148ns period all the way to ~622ms periods. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-14 23:47:06 +00:00
config PWM_BRCMSTB
tristate "Broadcom STB PWM support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC
help
Generic PWM framework driver for the Broadcom Set-top-Box
SoCs (BCM7xxx).
To compile this driver as a module, choose M Here: the module
will be called pwm-brcmstb.c.
pwm: Add CLPS711X PWM support Add a new driver for the ARM CLPS711X Pulse Width Modulator (PWM) interface. This CPU contain two 4-bit PWM outputs with constant period, based on CPU PLL frequency. PWM polarity is determined by hardware by power on reset. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-12 15:53:05 +00:00
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
pwm: Let PWM_CLPS711X depend on HAS_IOMEM PWM_CLPS711X needs HAS_IOMEM, so depend on it, the related error (with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap_resource" [drivers/pwm/pwm-clps711x.ko] undefined! ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-04 09:48:42 +00:00
depends on HAS_IOMEM
pwm: Add CLPS711X PWM support Add a new driver for the ARM CLPS711X Pulse Width Modulator (PWM) interface. This CPU contain two 4-bit PWM outputs with constant period, based on CPU PLL frequency. PWM polarity is determined by hardware by power on reset. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-12 15:53:05 +00:00
help
Generic PWM framework driver for Cirrus Logic CLPS711X.
To compile this driver as a module, choose M here: the module
will be called pwm-clps711x.
pwm: crc: Add Crystalcove (CRC) PWM driver The Crystalcove PMIC provides three PWM signals and this driver exports one of them on the BYT platform which is used to control backlight for DSI panel. This is platform device implementation of the drivers/mfd cell device for CRC PMIC. CC: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-26 09:02:08 +00:00
config PWM_CRC
bool "Intel Crystalcove (CRC) PWM support"
depends on X86 && INTEL_SOC_PMIC
help
Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
control.
pwm: add ep93xx PWM support Remove the non-standard EP93xx PWM driver in drivers/misc and add a new driver for the PWM controllers on the EP93xx platform based on the PWM framework. These PWM controllers each support 1 PWM channel with programmable duty cycle, frequency, and polarity inversion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-16 01:40:03 +00:00
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
depends on ARCH_EP93XX
help
Generic PWM framework driver for Cirrus Logic EP93xx.
To compile this driver as a module, choose M here: the module
will be called pwm-ep93xx.
pwm: Add Freescale FTM PWM driver support The FTM PWM device can be found on Vybrid VF610 Tower and Layerscape LS-1 SoCs. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-02-27 09:39:49 +00:00
config PWM_FSL_FTM
tristate "Freescale FlexTimer Module (FTM) PWM support"
pwm: add HAS_IOMEM dependency to PWM_FSL_FTM Ran into this on UML: drivers/built-in.o: In function `fsl_pwm_probe': linux/drivers/pwm/pwm-fsl-ftm.c:436: undefined reference to `devm_ioremap_resource' collect2: error: ld returned 1 exit status devm_ioremap_resource() is defined only when HAS_IOMEM is selected. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Xiubo Li <Li.Xiubo@freescale.com> Cc: Alison Wang <b18965@freescale.com> Cc: Jingchang Lu <b35083@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Yuan Yao <yao.yuan@freescale.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-01-02 13:02:07 +00:00
depends on HAS_IOMEM
pwm: Add Freescale FTM PWM driver support The FTM PWM device can be found on Vybrid VF610 Tower and Layerscape LS-1 SoCs. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-02-27 09:39:49 +00:00
depends on OF
pwm: fsl-ftm: Select REGMAP_MMIO Commit 42fa98a9c360 ("pwm: fsl-ftm: Convert to direct regmap API usage") introduced the following error when REGMAP_MMIO=n: drivers/built-in.o: In function `fsl_pwm_probe': >> pwm-fsl-ftm.c:(.text+0xd7d7): undefined reference to `devm_regmap_init_mmio_clk' Select select REGMAP_MMIO in order to fix this error. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-21 23:50:25 +00:00
select REGMAP_MMIO
pwm: Add Freescale FTM PWM driver support The FTM PWM device can be found on Vybrid VF610 Tower and Layerscape LS-1 SoCs. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-02-27 09:39:49 +00:00
help
Generic FTM PWM framework driver for Freescale VF610 and
Layerscape LS-1 SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-fsl-ftm.
pwm: Imagination Technologies PWM DAC driver The Pistachio SOC from Imagination Technologies includes a Pulse Width Modulation DAC which produces 1 to 4 digital bit-outputs which represent digital waveforms. These PWM outputs are primarily in charge of controlling backlight LED devices. Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Signed-off-by: Sai Masarapu <Sai.Masarapu@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> [thierry.reding: fixup license header as discussed on list] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-09 17:54:47 +00:00
config PWM_IMG
tristate "Imagination Technologies PWM driver"
depends on HAS_IOMEM
depends on MFD_SYSCON
depends on COMMON_CLK
depends on MIPS || COMPILE_TEST
help
Generic PWM framework driver for Imagination Technologies
PWM block which supports 4 channels.
To compile this driver as a module, choose M here: the module
will be called pwm-img
ARM i.MX: Move i.MX pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [eric@eukrea.com: set chip.dev to prevent probe failure] [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 09:04:35 +00:00
config PWM_IMX
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 08:19:55 +00:00
tristate "i.MX PWM support"
ARM i.MX: Move i.MX pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [eric@eukrea.com: set chip.dev to prevent probe failure] [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 09:04:35 +00:00
depends on ARCH_MXC
help
Generic PWM framework driver for i.MX.
To compile this driver as a module, choose M here: the module
will be called pwm-imx.
pwm: Add Ingenic JZ4740 support This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-22 08:01:24 +00:00
config PWM_JZ4740
tristate "Ingenic JZ4740 PWM support"
depends on MACH_JZ4740
help
Generic PWM framework driver for Ingenic JZ4740 based
machines.
To compile this driver as a module, choose M here: the module
will be called pwm-jz4740.
pwm: Add LP3943 PWM driver This is the other of the LP3943 MFD driver. LP3943 can be used as a PWM generator, up to 2 channels. * Two PWM generators supported * Supported PWM operations request, free, config, enable and disable * Pin assignment A driver data, 'pin_used' is checked when a PWM is requested. If the output pin is already assigned, then returns as failure. If the pin is available, 'pin_used' is set. When the PWM is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-06 02:18:43 +00:00
config PWM_LP3943
tristate "TI/National Semiconductor LP3943 PWM support"
depends on MFD_LP3943
help
Generic PWM framework driver for LP3943 which supports two PWM
channels.
To compile this driver as a module, choose M here: the module
will be called pwm-lp3943.
pwm: NXP LPC18xx PWM/SCT driver This commit adds support for NXP LPC18xx PWM/SCT. NXP LPC SoCs family, which includes LPC18xx/LPC43xx, provides a State Configurable Timer (SCT) which can be configured as a Pulse Width Modulator. Other SoCs in that family may share the same hardware. The PWM supports a total of 16 channels, but only 15 can be simultaneously requested. There's only one period, global to all the channels, thus PWM driver will refuse setting different values to it, unless there's only one channel requested. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> [thierry.reding@gmail.com: remove excessive padding of fields] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-08-06 02:31:46 +00:00
config PWM_LPC18XX_SCT
tristate "LPC18xx/43xx PWM/SCT support"
depends on ARCH_LPC18XX
help
Generic PWM framework driver for NXP LPC18xx PWM/SCT which
supports 16 channels.
A maximum of 15 channels can be requested simultaneously and
must have the same period.
To compile this driver as a module, choose M here: the module
will be called pwm-lpc18xx-sct.
pwm: add lpc32xx PWM support Add lpc32xx SOC PWM driver. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-10 14:38:10 +00:00
config PWM_LPC32XX
tristate "LPC32XX PWM support"
depends on ARCH_LPC32XX
help
Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
PWM controllers.
To compile this driver as a module, choose M here: the module
will be called pwm-lpc32xx.
pwm: add support for Intel Low Power Subsystem PWM Add support for Intel Low Power I/O subsystem PWM controllers found on Intel BayTrail SoC. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Chew, Kean Ho <kean.ho.chew@intel.com> Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-20 14:04:23 +00:00
config PWM_LPSS
pwm: lpss: Select core part automatically We have two users of core part right now. Let them to select core part automatically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-18 11:25:17 +00:00
tristate
pwm: add support for Intel Low Power Subsystem PWM Add support for Intel Low Power I/O subsystem PWM controllers found on Intel BayTrail SoC. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Chew, Kean Ho <kean.ho.chew@intel.com> Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-20 14:04:23 +00:00
pwm: lpss: Properly split driver to parts The driver consists of core, PCI, and platform parts. It would be better to split them into separate files. The platform driver is now called pwm-lpss-platform. Thus, previously set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe side since it seems no one from outside Intel is using it for now. While here, move to use macros module_pci_driver() and module_platform_driver(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> [thierry.reding: change select to depends on PWM_LPSS, cleanup] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-19 16:17:35 +00:00
config PWM_LPSS_PCI
tristate "Intel LPSS PWM PCI driver"
pwm: lpss: Select core part automatically We have two users of core part right now. Let them to select core part automatically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-18 11:25:17 +00:00
depends on X86 && PCI
select PWM_LPSS
pwm: lpss: Properly split driver to parts The driver consists of core, PCI, and platform parts. It would be better to split them into separate files. The platform driver is now called pwm-lpss-platform. Thus, previously set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe side since it seems no one from outside Intel is using it for now. While here, move to use macros module_pci_driver() and module_platform_driver(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> [thierry.reding: change select to depends on PWM_LPSS, cleanup] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-19 16:17:35 +00:00
help
The PCI driver for Intel Low Power Subsystem PWM controller.
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-pci.
config PWM_LPSS_PLATFORM
tristate "Intel LPSS PWM platform driver"
pwm: lpss: Select core part automatically We have two users of core part right now. Let them to select core part automatically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-18 11:25:17 +00:00
depends on X86 && ACPI
select PWM_LPSS
pwm: lpss: Properly split driver to parts The driver consists of core, PCI, and platform parts. It would be better to split them into separate files. The platform driver is now called pwm-lpss-platform. Thus, previously set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe side since it seems no one from outside Intel is using it for now. While here, move to use macros module_pci_driver() and module_platform_driver(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> [thierry.reding: change select to depends on PWM_LPSS, cleanup] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-19 16:17:35 +00:00
help
The platform driver for Intel Low Power Subsystem PWM controller.
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-platform.
pwm: Add MediaTek display PWM driver support Add display PWM driver support to modify backlight for MT8173 and MT6595. The PWM has one channel to control the brightness of the display. When the (high_width / period) is closer to 1, the screen is brighter; otherwise, it is darker. Signed-off-by: YH Huang <yh.huang@mediatek.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-08-18 07:27:54 +00:00
config PWM_MTK_DISP
tristate "MediaTek display PWM driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_IOMEM
help
Generic PWM framework driver for MediaTek disp-pwm device.
The PWM is used to control the backlight brightness for display.
To compile this driver as a module, choose M here: the module
will be called pwm-mtk-disp.
pwm: add pwm-mxs support Add generic PWM framework driver (DT only) for Freescale MXS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-04-04 02:50:52 +00:00
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
pwm: pwm-mxs: use global reset function stmp_reset_block Use global reset function stmp_reset_block instead of mxs_reset_block to remove <mach/common.h> inclusion. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-06-26 08:58:09 +00:00
select STMP_DEVICE
pwm: add pwm-mxs support Add generic PWM framework driver (DT only) for Freescale MXS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-04-04 02:50:52 +00:00
help
Generic PWM framework driver for Freescale MXS.
To compile this driver as a module, choose M here: the module
will be called pwm-mxs.
pwm: Add PWM driver for OMAP using dual-mode timers Adds support for using a OMAP dual-mode timer with PWM capability as a Linux PWM device. The driver controls the timer by using the dmtimer API. Add a platform_data structure for each pwm-omap-dmtimer nodes containing the dmtimers functions in order to get driver not rely on platform specific functions. Cc: Grant Erickson <marathon96@gmail.com> Cc: NeilBrown <neilb@suse.de> Cc: Joachim Eastwood <manabian@gmail.com> Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Tony Lindgren <tony@atomide.com> [thierry.reding@gmail.com: coding style bikeshed, fix timer leak] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-02 11:14:21 +00:00
config PWM_OMAP_DMTIMER
tristate "OMAP Dual-Mode Timer PWM support"
depends on OF && ARCH_OMAP && OMAP_DM_TIMER
help
Generic PWM framework driver for OMAP Dual-Mode Timer PWM output
To compile this driver as a module, choose M here: the module
will be called pwm-omap-dmtimer
pwm: add pca9685 driver Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-30 07:50:12 +00:00
config PWM_PCA9685
tristate "NXP PCA9685 PWM driver"
pwm-pca9685: enable ACPI device found on Galileo Gen2 There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via ACPI ID INT3492. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-10-07 10:18:49 +00:00
depends on I2C
pwm: pca9685: depends on I2C rather than REGMAP_I2C REGMAP_I2C is not a visible config option. Thus make PWM_PCA9685 depend on I2c and then select REGMAP_I2C. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-17 03:51:29 +00:00
select REGMAP_I2C
pwm: add pca9685 driver Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-30 07:50:12 +00:00
help
Generic PWM framework driver for NXP PCA9685 LED controller.
To compile this driver as a module, choose M here: the module
will be called pwm-pca9685.
pwm: Move PUV3 PWM driver to PWM framework This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Qin Rui <qinrui@mprc.pku.edu.cn> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-08-31 06:29:24 +00:00
config PWM_PUV3
tristate "PKUnity NetBook-0916 PWM support"
depends on ARCH_PUV3
help
Generic PWM framework driver for PKUnity NetBook-0916.
To compile this driver as a module, choose M here: the module
will be called pwm-puv3.
pwm: Move PXA PWM driver to PWM framework This commit moves the PXA PWM driver to the drivers/pwm subdirectory and converts it to use the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-01-02 20:22:38 +00:00
config PWM_PXA
tristate "PXA PWM support"
depends on ARCH_PXA
help
Generic PWM framework driver for PXA.
To compile this driver as a module, choose M here: the module
will be called pwm-pxa.
pwm: Add support for R-Car PWM Timer This patch adds support for R-Car SoCs PWM Timer. The PWM timer of R-Car H2 has 7 channels. So, we can use the channels if we describe device tree nodes. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-30 08:47:53 +00:00
config PWM_RCAR
tristate "Renesas R-Car PWM support"
depends on ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || COMPILE_TEST
depends on HAS_IOMEM
help
This driver exposes the PWM Timer controller found in Renesas
R-Car chips through the PWM API.
To compile this driver as a module, choose M here: the module
will be called pwm-rcar.
pwm: Add Renesas TPU PWM driver The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-13 16:54:44 +00:00
config PWM_RENESAS_TPU
tristate "Renesas TPU PWM support"
pwm: rcar: Depend on ARCH_RENESAS instead of ARCH_SHMOBILE This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-02-25 01:03:23 +00:00
depends on ARCH_RENESAS || COMPILE_TEST
pwm: renesas-tpu: Add dependency on HAS_IOMEM On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `tpu_probe': drivers/pwm/pwm-renesas-tpu.c:421: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-01-31 12:45:18 +00:00
depends on HAS_IOMEM
pwm: Add Renesas TPU PWM driver The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-13 16:54:44 +00:00
help
This driver exposes the Timer Pulse Unit (TPU) PWM controller found
in Renesas chips through the PWM API.
To compile this driver as a module, choose M here: the module
will be called pwm-renesas-tpu.
pwm: add Rockchip SoC PWM support This commit adds a driver for the PWM controller found on Rockchip RK29, RK30 and RK31 SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-06-21 14:22:06 +00:00
config PWM_ROCKCHIP
tristate "Rockchip PWM support"
depends on ARCH_ROCKCHIP
help
Generic PWM framework driver for the PWM controller found on
Rockchip SoCs.
ARM Samsung: Move s3c pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 09:04:36 +00:00
config PWM_SAMSUNG
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 08:19:55 +00:00
tristate "Samsung PWM support"
pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7 To re-use the existing PWM driver for 64-bit ARM based Exynos7 SoC, make the driver depend on ARCH_EXYNOS along with PLAT_SAMSUNG. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-31 12:38:46 +00:00
depends on PLAT_SAMSUNG || ARCH_EXYNOS
ARM Samsung: Move s3c pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 09:04:36 +00:00
help
Generic PWM framework driver for Samsung.
To compile this driver as a module, choose M here: the module
will be called pwm-samsung.
pwm: Add SPEAr PWM chip driver support Add support for PWM chips present on SPEAr platforms. These PWM chips support 4 channel output with programmable duty cycle and frequency. More details on these PWM chips can be obtained from relevant chapter of reference manual, present at following[1] location. 1. http://www.st.com/internet/mcu/product/251211.jsp Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-10-25 04:09:13 +00:00
config PWM_SPEAR
tristate "STMicroelectronics SPEAr PWM support"
depends on PLAT_SPEAR
depends on OF
help
Generic PWM framework driver for the PWM controller on ST
SPEAr SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-spear.
pwm: sti: Add new driver for ST's PWM IP This driver supports all current STi platforms' PWM IPs. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> [thierry.reding: rename module to pwm-sti, fix build breakage] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-07-14 14:33:27 +00:00
config PWM_STI
tristate "STiH4xx PWM support"
depends on ARCH_STI
depends on OF
help
Generic PWM framework driver for STiH4xx SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-sti.
pwm: Add Allwinner SoC support This adds a generic PWM framework driver for the PWM controller found on Allwinner SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-17 21:15:39 +00:00
config PWM_SUN4I
tristate "Allwinner PWM support"
depends on ARCH_SUNXI || COMPILE_TEST
depends on HAS_IOMEM && COMMON_CLK
help
Generic PWM framework driver for Allwinner SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-sun4i.
pwm: Add NVIDIA Tegra SoC support This commit adds a generic PWM framework driver for the PWFM controller found on NVIDIA Tegra SoCs. The driver is based on code from the Chromium kernel tree and was originally written by Gary King (NVIDIA) and later modified by Simon Que (Chromium). Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-12-21 06:47:07 +00:00
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
depends on ARCH_TEGRA
help
Generic PWM framework driver for the PWFM controller found on NVIDIA
Tegra SoCs.
To compile this driver as a module, choose M here: the module
will be called pwm-tegra.
pwm: pwm-tiecap: PWM driver support for ECAP APWM ECAP hardware on AM33XX SOC supports auxiliary PWM (APWM) feature. This commit adds PWM driver support for ECAP hardware on AM33XX SOC. In the ECAP hardware, each PWM pin can also be configured to be in capture mode. Current implementation only supports PWM mode of operation. Also, hardware supports sync between multiple PWM pins but the driver supports simple independent PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 11:28:18 +00:00
config PWM_TIECAP
tristate "ECAP PWM support"
pwm: tipwmss: Enable on TI DRA7x and AM437x TIPWMSS is present on TI's DRA7x and AM437x SoCs. Enable its usage. Instead of adding each SoC individually, use the more generic symbol ARCH_OMAP2PLUS instead. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-08 15:14:05 +00:00
depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
pwm: pwm-tiecap: PWM driver support for ECAP APWM ECAP hardware on AM33XX SOC supports auxiliary PWM (APWM) feature. This commit adds PWM driver support for ECAP hardware on AM33XX SOC. In the ECAP hardware, each PWM pin can also be configured to be in capture mode. Current implementation only supports PWM mode of operation. Also, hardware supports sync between multiple PWM pins but the driver supports simple independent PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 11:28:18 +00:00
help
PWM driver support for the ECAP APWM controller found on AM33XX
TI SOC
To compile this driver as a module, choose M here: the module
will be called pwm-tiecap.
pwm: pwm-tiehrpwm: PWM driver support for EHRPWM Enhanced high resolution PWM module (EHRPWM) hardware can be used to generate PWM output over 2 channels. This commit adds PWM driver support for EHRPWM device present on AM33XX SOC. Current implementation supports simple PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 11:28:19 +00:00
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
pwm: tipwmss: Enable on TI DRA7x and AM437x TIPWMSS is present on TI's DRA7x and AM437x SoCs. Enable its usage. Instead of adding each SoC individually, use the more generic symbol ARCH_OMAP2PLUS instead. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-08 15:14:05 +00:00
depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
pwm: pwm-tiehrpwm: PWM driver support for EHRPWM Enhanced high resolution PWM module (EHRPWM) hardware can be used to generate PWM output over 2 channels. This commit adds PWM driver support for EHRPWM device present on AM33XX SOC. Current implementation supports simple PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 11:28:19 +00:00
help
PWM driver support for the EHRPWM controller found on AM33XX
TI SOC
To compile this driver as a module, choose M here: the module
will be called pwm-tiehrpwm.
pwm: Add TI PWM subsystem driver In some platforms (like am33xx), PWM sub modules (ECAP, EHRPWM, EQEP) are integrated to PWM subsystem. These PWM submodules has resources shared and only one register bit-field is provided to control module/clock enable/disable, makes it difficult to handle common resources from independent PWMSS submodule drivers. So the solution here implemented in this patch is, to create driver for PWMSS and take the role of parent driver for PWM submodules. PWMSS parent driver enumerates all the child nodes under PWMSS module. Also symbol "pwmss_submodule_state_change" exported to enable clock gating for individual PWMSS submodules, and submodule drivers has to enable clock gating from their drivers. As this is only supported during DT boot, the parent/child relationship is created and populated in DT execution flow. The only required change is inside DTS file, making EHRPWM & ECAP as a child to PWMSS node. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 08:48:06 +00:00
config PWM_TIPWMSS
bool
pwm: tipwmss: Enable on TI DRA7x and AM437x TIPWMSS is present on TI's DRA7x and AM437x SoCs. Enable its usage. Instead of adding each SoC individually, use the more generic symbol ARCH_OMAP2PLUS instead. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-08 15:14:05 +00:00
default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
pwm: Add TI PWM subsystem driver In some platforms (like am33xx), PWM sub modules (ECAP, EHRPWM, EQEP) are integrated to PWM subsystem. These PWM submodules has resources shared and only one register bit-field is provided to control module/clock enable/disable, makes it difficult to handle common resources from independent PWMSS submodule drivers. So the solution here implemented in this patch is, to create driver for PWMSS and take the role of parent driver for PWM submodules. PWMSS parent driver enumerates all the child nodes under PWMSS module. Also symbol "pwmss_submodule_state_change" exported to enable clock gating for individual PWMSS submodules, and submodule drivers has to enable clock gating from their drivers. As this is only supported during DT boot, the parent/child relationship is created and populated in DT execution flow. The only required change is inside DTS file, making EHRPWM & ECAP as a child to PWMSS node. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 08:48:06 +00:00
help
PWM Subsystem driver support for AM33xx SOC.
PWM submodules require PWM config space access from submodule
drivers and require common parent driver support.
pwm: New driver to support PWMs on TWL4030/6030 series of PMICs The driver supports the following PWM outputs: TWL4030 PWM0 and PWM1 TWL6030 PWM1 and PWM2 On TWL4030 the PWM signals are muxed. Upon requesting the PWM the driver will select the correct mux so the PWM can be used. When the PWM has been freed the original configuration is going to be restored. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 10:09:57 +00:00
config PWM_TWL
tristate "TWL4030/6030 PWM support"
depends on TWL4030_CORE
help
Generic PWM framework driver for TWL4030/6030.
To compile this driver as a module, choose M here: the module
will be called pwm-twl.
pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs The driver supports the following LED outputs as generic PWM driver: TWL4030 LEDA and LEDB (PWMA and PWMB) TWL6030 Charging indicator LED (PWM LED) On TWL6030 when the PWM requested LED is configured to be controlled by SW. In this case the user can enable/disable and set the duty period freely. When the PWM has been freed, the LED driver is put back to HW control. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 10:09:58 +00:00
config PWM_TWL_LED
tristate "TWL4030/6030 PWM support for LED drivers"
depends on TWL4030_CORE
help
Generic PWM framework driver for TWL4030/6030 LED terminals.
To compile this driver as a module, choose M here: the module
will be called pwm-twl-led.
ARM vt8500: Move vt8500 pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 09:04:37 +00:00
config PWM_VT8500
pwm: Make Kconfig entries more consistent PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30 08:19:55 +00:00
tristate "vt8500 PWM support"
ARM vt8500: Move vt8500 pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 09:04:37 +00:00
depends on ARCH_VT8500
help
Generic PWM framework driver for vt8500.
To compile this driver as a module, choose M here: the module
will be called pwm-vt8500.
pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 08:40:40 +00:00
endif
Reference in New Issue Copy Permalink