davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7d3579e8e6
kernel-ark/net/bridge/br_private.h

541 lines
15 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _BR_PRIVATE_H
#define _BR_PRIVATE_H
#include <linux/netdevice.h>
#include <linux/if_bridge.h>
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 16:12:50 +00:00
#include <linux/netpoll.h>
bridge: 64bit rx/tx counters Use u64_stats_sync infrastructure to provide 64bit rx/tx counters even on 32bit hosts. It is safe to use a single u64_stats_sync for rx and tx, because BH is disabled on both, and we use per_cpu data. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 20:00:48 +00:00
#include <linux/u64_stats_sync.h>
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 23:27:55 +00:00
#include <net/route.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define BR_HASH_BITS 8
#define BR_HASH_SIZE (1 << BR_HASH_BITS)
#define BR_HOLD_TIME (1*HZ)
#define BR_PORT_BITS 10
#define BR_MAX_PORTS (1<<BR_PORT_BITS)
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-21 21:22:44 +00:00
#define BR_VERSION "2.3"
/* Path to usermode spanning tree program */
#define BR_STP_PROG "/sbin/bridge-stp"
[BRIDGE]: add version number Add version info to bridge module. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 03:01:30 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
typedef struct bridge_id bridge_id;
typedef struct mac_addr mac_addr;
typedef __u16 port_id;
struct bridge_id
{
unsigned char prio[2];
unsigned char addr[6];
};
struct mac_addr
{
unsigned char addr[6];
};
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 03:42:07 +00:00
struct br_ip
{
union {
__be32 ip4;
bridge br_multicast: IPv6 MLD support. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-22 16:54:22 +00:00
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
struct in6_addr ip6;
#endif
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 03:42:07 +00:00
} u;
__be16 proto;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct net_bridge_fdb_entry
{
struct hlist_node hlist;
struct net_bridge_port *dst;
struct rcu_head rcu;
unsigned long ageing_timer;
mac_addr addr;
unsigned char is_local;
unsigned char is_static;
};
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
struct net_bridge_port_group {
struct net_bridge_port *port;
struct net_bridge_port_group *next;
struct hlist_node mglist;
struct rcu_head rcu;
struct timer_list timer;
struct timer_list query_timer;
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 03:42:07 +00:00
struct br_ip addr;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
u32 queries_sent;
};
struct net_bridge_mdb_entry
{
struct hlist_node hlist[2];
struct hlist_node mglist;
struct net_bridge *br;
struct net_bridge_port_group *ports;
struct rcu_head rcu;
struct timer_list timer;
struct timer_list query_timer;
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 03:42:07 +00:00
struct br_ip addr;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
u32 queries_sent;
};
struct net_bridge_mdb_htable
{
struct hlist_head *mhash;
struct rcu_head rcu;
struct net_bridge_mdb_htable *old;
u32 size;
u32 max;
u32 secret;
u32 ver;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct net_bridge_port
{
struct net_bridge *br;
struct net_device *dev;
struct list_head list;
/* STP */
u8 priority;
u8 state;
u16 port_no;
unsigned char topology_change_ack;
unsigned char config_pending;
port_id port_id;
port_id designated_port;
bridge_id designated_root;
bridge_id designated_bridge;
u32 path_cost;
u32 designated_cost;
struct timer_list forward_delay_timer;
struct timer_list hold_timer;
struct timer_list message_age_timer;
struct kobject kobj;
struct rcu_head rcu;
net/bridge: Add 'hairpin' port forwarding mode This patch adds a 'hairpin' (also called 'reflective relay') mode port configuration to the Linux Ethernet bridge kernel module. A bridge supporting hairpin forwarding mode can send frames back out through the port the frame was received on. Hairpin mode is required to support basic VEPA (Virtual Ethernet Port Aggregator) capabilities. You can find additional information on VEPA here: http://tech.groups.yahoo.com/group/evb/ http://www.ieee802.org/1/files/public/docs2009/new-hudson-vepa_seminar-20090514d.pdf http://www.internet2.edu/presentations/jt2009jul/20090719-congdon.pdf An additional patch 'bridge-utils: Add 'hairpin' port forwarding mode' is provided to allow configuring hairpin mode from userspace tools. Signed-off-by: Paul Congdon <paul.congdon@hp.com> Signed-off-by: Anna Fischer <anna.fischer@hp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 06:55:16 +00:00
unsigned long flags;
#define BR_HAIRPIN_MODE 0x00000001
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
u32 multicast_startup_queries_sent;
unsigned char multicast_router;
struct timer_list multicast_router_timer;
struct timer_list multicast_query_timer;
struct hlist_head mglist;
struct hlist_node rlist;
#endif
bridge: update sysfs link names if port device names have changed Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge. As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link. This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link. https://bugzilla.kernel.org/show_bug.cgi?id=12743 Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:11 +00:00
#ifdef CONFIG_SYSFS
char sysfs_name[IFNAMSIZ];
#endif
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 16:12:50 +00:00
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *np;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
bridge: use rx_handler_data pointer to store net_bridge_port pointer Register net_bridge_port pointer as rx_handler data pointer. As br_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a bridge port. Also rcuized pointers are now correctly dereferenced in br_fdb.c and in netfilter parts. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 06:50:45 +00:00
#define br_port_get_rcu(dev) \
((struct net_bridge_port *) rcu_dereference(dev->rx_handler_data))
#define br_port_get(dev) ((struct net_bridge_port *) dev->rx_handler_data)
#define br_port_exists(dev) (dev->priv_flags & IFF_BRIDGE_PORT)
net: Fix various endianness glitches Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 02:06:52 +00:00
struct br_cpu_netstats {
bridge: 64bit rx/tx counters Use u64_stats_sync infrastructure to provide 64bit rx/tx counters even on 32bit hosts. It is safe to use a single u64_stats_sync for rx and tx, because BH is disabled on both, and we use per_cpu data. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 20:00:48 +00:00
u64 rx_packets;
u64 rx_bytes;
u64 tx_packets;
u64 tx_bytes;
struct u64_stats_sync syncp;
net: Fix various endianness glitches Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 02:06:52 +00:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct net_bridge
{
spinlock_t lock;
struct list_head port_list;
struct net_device *dev;
bridge: per-cpu packet statistics (v3) The shared packet statistics are a potential source of slow down on bridged traffic. Convert to per-cpu array, but only keep those statistics which change per-packet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:09 +00:00
net: Fix various endianness glitches Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 02:06:52 +00:00
struct br_cpu_netstats __percpu *stats;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spinlock_t hash_lock;
struct hlist_head hash[BR_HASH_SIZE];
[BRIDGE]: limited ethtool support Add limited ethtool support to bridge to allow disabling features. Note: if underlying device does not support a feature (like checksum offload), then the bridge device won't inherit it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 03:00:58 +00:00
unsigned long feature_mask;
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 23:27:55 +00:00
#ifdef CONFIG_BRIDGE_NETFILTER
struct rtable fake_rtable;
bridge: add per bridge device controls for invoking iptables Support more fine grained control of bridge netfilter iptables invocation by adding seperate brnf_call_*tables parameters for each device using the sysfs interface. Packets are passed to layer 3 netfilter when either the global parameter or the per bridge parameter is enabled. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-02 07:32:57 +00:00
bool nf_call_iptables;
bool nf_call_ip6tables;
bool nf_call_arptables;
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 23:27:55 +00:00
#endif
bridge: make bridge address settings sticky Normally, the bridge just chooses the smallest mac address as the bridge id and mac address of bridge device. But if the administrator has explictly set the interface address then don't change it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 23:10:06 +00:00
unsigned long flags;
#define BR_SET_MAC_ADDR 0x00000001
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* STP */
bridge_id designated_root;
bridge_id bridge_id;
u32 root_path_cost;
unsigned long max_age;
unsigned long hello_time;
unsigned long forward_delay;
unsigned long bridge_max_age;
unsigned long ageing_time;
unsigned long bridge_hello_time;
unsigned long bridge_forward_delay;
[BRIDGE]: allow show/store of group multicast address Bridge's communicate with each other using Spanning Tree Protocol over a standard multicast address. There are times when testing or layering bridges over existing topologies or tunnels, when it is useful to use alternative multicast addresses for STP packets. The 802.1d standard has some unused addresses, that can be used for this. This patch is restrictive in that it only allows one of the possible addresses in the standard. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:59:21 +00:00
u8 group_addr[ETH_ALEN];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
u16 root_port;
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-21 21:22:44 +00:00
enum {
BR_NO_STP, /* no spanning tree */
BR_KERNEL_STP, /* old STP in kernel */
BR_USER_STP, /* new RSTP in userspace */
} stp_enabled;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned char topology_change;
unsigned char topology_change_detected;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
unsigned char multicast_router;
u8 multicast_disabled:1;
u32 hash_elasticity;
u32 hash_max;
u32 multicast_last_member_count;
u32 multicast_startup_queries_sent;
u32 multicast_startup_query_count;
unsigned long multicast_last_member_interval;
unsigned long multicast_membership_interval;
unsigned long multicast_querier_interval;
unsigned long multicast_query_interval;
unsigned long multicast_query_response_interval;
unsigned long multicast_startup_query_interval;
spinlock_t multicast_lock;
struct net_bridge_mdb_htable *mdb;
struct hlist_head router_list;
struct hlist_head mglist;
struct timer_list multicast_router_timer;
struct timer_list multicast_querier_timer;
struct timer_list multicast_query_timer;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct timer_list hello_timer;
struct timer_list tcn_timer;
struct timer_list topology_change_timer;
struct timer_list gc_timer;
Kobject: change net/bridge to use kobject_create_and_add The kobject in the bridge code is only used for registering with sysfs, not for any lifespan rules. This patch changes it to be only a pointer and use the simpler api for this kind of thing. Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-17 19:54:39 +00:00
struct kobject *ifobj;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
bridge: Allow tail-call on br_pass_frame_up This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:40 +00:00
struct br_input_skb_cb {
struct net_device *brdev;
bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15 21:51:18 +00:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
int igmp;
int mrouters_only;
bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15 21:51:18 +00:00
#endif
bridge: Allow tail-call on br_pass_frame_up This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:40 +00:00
};
#define BR_INPUT_SKB_CB(__skb) ((struct br_input_skb_cb *)(__skb)->cb)
bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15 21:51:18 +00:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb) (BR_INPUT_SKB_CB(__skb)->mrouters_only)
#else
# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb) (0)
#endif
bridge: change console message interface Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:09 +00:00
#define br_printk(level, br, format, args...) \
printk(level "%s: " format, (br)->dev->name, ##args)
#define br_err(__br, format, args...) \
br_printk(KERN_ERR, __br, format, ##args)
#define br_warn(__br, format, args...) \
br_printk(KERN_WARNING, __br, format, ##args)
#define br_notice(__br, format, args...) \
br_printk(KERN_NOTICE, __br, format, ##args)
#define br_info(__br, format, args...) \
br_printk(KERN_INFO, __br, format, ##args)
#define br_debug(br, format, args...) \
pr_debug("%s: " format, (br)->dev->name, ##args)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern struct notifier_block br_device_notifier;
[BRIDGE]: allow show/store of group multicast address Bridge's communicate with each other using Spanning Tree Protocol over a standard multicast address. There are times when testing or layering bridges over existing topologies or tunnels, when it is useful to use alternative multicast addresses for STP packets. The 802.1d standard has some unused addresses, that can be used for this. This patch is restrictive in that it only allows one of the possible addresses in the standard. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 06:59:21 +00:00
extern const u8 br_group_address[ETH_ALEN];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* called under bridge lock */
static inline int br_is_root_bridge(const struct net_bridge *br)
{
return !memcmp(&br->bridge_id, &br->designated_root, 8);
}
/* br_device.c */
extern void br_dev_setup(struct net_device *dev);
netdev: convert pseudo-devices to netdev_tx_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:50:41 +00:00
extern netdev_tx_t br_dev_xmit(struct sk_buff *skb,
struct net_device *dev);
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:08 +00:00
#ifdef CONFIG_NET_POLL_CONTROLLER
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 16:12:50 +00:00
static inline struct netpoll_info *br_netpoll_info(struct net_bridge *br)
{
return br->dev->npinfo;
}
static inline void br_netpoll_send_skb(const struct net_bridge_port *p,
struct sk_buff *skb)
{
struct netpoll *np = p->np;
if (np)
netpoll_send_skb(np, skb);
}
extern int br_netpoll_enable(struct net_bridge_port *p);
extern void br_netpoll_disable(struct net_bridge_port *p);
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:08 +00:00
#else
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 16:12:50 +00:00
static inline struct netpoll_info *br_netpoll_info(struct net_bridge *br)
{
return NULL;
}
bridge: Add const to dummy br_netpoll_send_skb The version of br_netpoll_send_skb used when netpoll is off is missing a const thus causing a warning. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16 04:43:48 +00:00
static inline void br_netpoll_send_skb(const struct net_bridge_port *p,
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 16:12:50 +00:00
struct sk_buff *skb)
{
}
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:08 +00:00
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 16:12:50 +00:00
static inline int br_netpoll_enable(struct net_bridge_port *p)
{
return 0;
}
static inline void br_netpoll_disable(struct net_bridge_port *p)
{
}
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:08 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_fdb.c */
bridge: check kmem_cache_create() error This patch checks kmem_cache_create() error and aborts loading module on failure. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-04-07 09:57:07 +00:00
extern int br_fdb_init(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void br_fdb_fini(void);
bridge: add sysfs hook to flush forwarding table The RSTP daemon needs to be able to flush all dynamic forwarding entries in the case of topology change. This is a temporary interface. It will change to a netlink interface before RSTP daemon is officially released. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-04-09 19:57:54 +00:00
extern void br_fdb_flush(struct net_bridge *br);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void br_fdb_changeaddr(struct net_bridge_port *p,
const unsigned char *newaddr);
extern void br_fdb_cleanup(unsigned long arg);
extern void br_fdb_delete_by_port(struct net_bridge *br,
[BRIDGE]: flush forwarding table when device carrier off Flush the forwarding table when carrier is lost. This helps for availability because we don't want to forward to a downed device and new packets may come in on other links. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-12 21:45:38 +00:00
const struct net_bridge_port *p, int do_all);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
const unsigned char *addr);
bridge: Simplify interface for ATM LANE This patch changes FDB entry check for ATM LANE bridge integration. There's no point in holding a FDB entry around SKB building. br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr() hook that checks if the addr has FDB entry pointing to other port to the one the request arrived on. FDB entry refcounting is removed as it's not used anywhere else. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-05 05:35:28 +00:00
extern int br_fdb_test_addr(struct net_device *dev, unsigned char *addr);
[NET] BRIDGE: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:35 +00:00
extern int br_fdb_fillbuf(struct net_bridge *br, void *buf,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long count, unsigned long off);
extern int br_fdb_insert(struct net_bridge *br,
struct net_bridge_port *source,
const unsigned char *addr);
extern void br_fdb_update(struct net_bridge *br,
struct net_bridge_port *source,
const unsigned char *addr);
/* br_forward.c */
extern void br_deliver(const struct net_bridge_port *to,
struct sk_buff *skb);
extern int br_dev_queue_push_xmit(struct sk_buff *skb);
extern void br_forward(const struct net_bridge_port *to,
bridge: Fix br_forward crash in promiscuous mode From: Michael Braun <michael-dev@fami-braun.de> bridge: Fix br_forward crash in promiscuous mode It's a linux-next kernel from 2010-03-12 on an x86 system and it OOPs in the bridge module in br_pass_frame_up (called by br_handle_frame_finish) because brdev cannot be dereferenced (its set to a non-null value). Adding some BUG_ON statements revealed that BR_INPUT_SKB_CB(skb)->brdev == br-dev (as set in br_handle_frame_finish first) only holds until br_forward is called. The next call to br_pass_frame_up then fails. Digging deeper it seems that br_forward either frees the skb or passes it to NF_HOOK which will in turn take care of freeing the skb. The same is holds for br_pass_frame_ip. So it seems as if two independent skb allocations are required. As far as I can see, commit b33084be192ee1e347d98bb5c9e38a53d98d35e2 ("bridge: Avoid unnecessary clone on forward path") removed skb duplication and so likely causes this crash. This crash does not happen on 2.6.33. I've therefore modified br_forward the same way br_flood has been modified so that the skb is not freed if skb0 is going to be used and I can confirm that the attached patch resolves the issue for me. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 07:26:22 +00:00
struct sk_buff *skb, struct sk_buff *skb0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int br_forward_finish(struct sk_buff *skb);
[BRIDGE]: Kill clone argument to br_flood_* The clone argument is only used by one caller and that caller can clone the packet itself. This patch moves the clone call into the caller and kills the clone argument. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 23:20:48 +00:00
extern void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb);
bridge: Avoid unnecessary clone on forward path When the packet is delivered to the local bridge device we may end up cloning it unnecessarily if no bridge port can receive the packet in br_flood. This patch avoids this by moving the skb_clone into br_flood. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:41 +00:00
extern void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
struct sk_buff *skb2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_if.c */
[BRIDGE]: eliminate workqueue for carrier check Having a work queue for checking carrier leads to lots of race issues. Simpler to just get the cost when data structure is created and update on change. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-22 09:10:18 +00:00
extern void br_port_carrier_check(struct net_bridge_port *p);
netns bridge: allow bridges in netns! Bridge as netdevice doesn't cross netns boundaries. Bridge ports and bridge itself live in same netns. Notifiers are fixed. netns propagated from userspace socket for setup and teardown. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08 23:19:58 +00:00
extern int br_add_bridge(struct net *net, const char *name);
extern int br_del_bridge(struct net *net, const char *name);
netns bridge: cleanup bridges during netns stop Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08 23:20:18 +00:00
extern void br_net_exit(struct net *net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int br_add_if(struct net_bridge *br,
struct net_device *dev);
extern int br_del_if(struct net_bridge *br,
struct net_device *dev);
extern int br_min_mtu(const struct net_bridge *br);
[BRIDGE]: set features based on enslaved devices Make features of the bridge pseudo-device be a subset of the underlying devices. Motivated by Xen and others who use bridging to do failover. Signed-off-by: Catalin BOIE <catab at umrella.ro> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29 21:15:17 +00:00
extern void br_features_recompute(struct net_bridge *br);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_input.c */
extern int br_handle_frame_finish(struct sk_buff *skb);
net: replace hooks in __netif_receive_skb V5 What this patch does is it removes two receive frame hooks (for bridge and for macvlan) from __netif_receive_skb. These are replaced them with a single hook for both. It only supports one hook per device because it makes no sense to do bridging and macvlan on the same device. Then a network driver (of virtual netdev like macvlan or bridge) can register an rx_handler for needed net device. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01 21:52:08 +00:00
extern struct sk_buff *br_handle_frame(struct sk_buff *skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_ioctl.c */
extern int br_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __user *arg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
/* br_multicast.c */
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
extern int br_multicast_rcv(struct net_bridge *br,
struct net_bridge_port *port,
struct sk_buff *skb);
extern struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
struct sk_buff *skb);
extern void br_multicast_add_port(struct net_bridge_port *port);
extern void br_multicast_del_port(struct net_bridge_port *port);
extern void br_multicast_enable_port(struct net_bridge_port *port);
extern void br_multicast_disable_port(struct net_bridge_port *port);
extern void br_multicast_init(struct net_bridge *br);
extern void br_multicast_open(struct net_bridge *br);
extern void br_multicast_stop(struct net_bridge *br);
bridge: Add multicast forwarding functions This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:46 +00:00
extern void br_multicast_deliver(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb);
extern void br_multicast_forward(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb, struct sk_buff *skb2);
bridge: Add multicast_router sysfs entries This patch allows the user to forcibly enable/disable ports as having multicast routers attached. A port with a multicast router will receive all multicast traffic. The value 0 disables it completely. The default is 1 which lets the system automatically detect the presence of routers (currently this is limited to picking up queries), and 2 means that the port will always receive all multicast traffic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:49 +00:00
extern int br_multicast_set_router(struct net_bridge *br, unsigned long val);
extern int br_multicast_set_port_router(struct net_bridge_port *p,
unsigned long val);
bridge: Add multicast_snooping sysfs toggle This patch allows the user to disable IGMP snooping completely through a sysfs toggle. It also allows the user to reenable snooping when it has been automatically disabled due to hash collisions. If the collisions have not been resolved however the system will refuse to reenable snooping. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:50 +00:00
extern int br_multicast_toggle(struct net_bridge *br, unsigned long val);
bridge: Add hash elasticity/max sysfs entries This patch allows the user to control the hash elasticity/max parameters. The elasticity setting does not take effect until the next new multicast group is added. At which point it is checked and if after rehashing it still can't be satisfied then snooping will be disabled. The max setting on the other hand takes effect immediately. It must be a power of two and cannot be set to a value less than the current number of multicast group entries. This is the only way to shrink the multicast hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:51 +00:00
extern int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val);
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 09:53:04 +00:00
static inline bool br_multicast_is_router(struct net_bridge *br)
{
return br->multicast_router == 2 ||
(br->multicast_router == 1 &&
timer_pending(&br->multicast_router_timer));
}
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
#else
static inline int br_multicast_rcv(struct net_bridge *br,
struct net_bridge_port *port,
struct sk_buff *skb)
{
return 0;
}
static inline struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
struct sk_buff *skb)
{
return NULL;
}
static inline void br_multicast_add_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_del_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_enable_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_disable_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_init(struct net_bridge *br)
{
}
static inline void br_multicast_open(struct net_bridge *br)
{
}
static inline void br_multicast_stop(struct net_bridge *br)
{
}
bridge: Add multicast forwarding functions This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:46 +00:00
static inline void br_multicast_deliver(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb)
{
}
static inline void br_multicast_forward(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb,
struct sk_buff *skb2)
{
}
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
static inline bool br_multicast_is_router(struct net_bridge *br)
{
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 09:53:04 +00:00
return 0;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
}
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 09:53:04 +00:00
#endif
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27 19:41:45 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_netfilter.c */
[BRIDGE]: fix module startup error handling Return address in use, if some other kernel code has the SAP. Propogate out error codes from netfilter registration and unwind. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 22:59:33 +00:00
#ifdef CONFIG_BRIDGE_NETFILTER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int br_netfilter_init(void);
extern void br_netfilter_fini(void);
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 23:27:55 +00:00
extern void br_netfilter_rtable_init(struct net_bridge *);
[BRIDGE]: fix module startup error handling Return address in use, if some other kernel code has the SAP. Propogate out error codes from netfilter registration and unwind. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 22:59:33 +00:00
#else
#define br_netfilter_init() (0)
#define br_netfilter_fini() do { } while(0)
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 23:27:55 +00:00
#define br_netfilter_rtable_init(x)
[BRIDGE]: fix module startup error handling Return address in use, if some other kernel code has the SAP. Propogate out error codes from netfilter registration and unwind. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 22:59:33 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_stp.c */
extern void br_log_state(const struct net_bridge_port *p);
extern struct net_bridge_port *br_get_port(struct net_bridge *br,
[NET] BRIDGE: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:35 +00:00
u16 port_no);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void br_init_port(struct net_bridge_port *p);
extern void br_become_designated_port(struct net_bridge_port *p);
/* br_stp_if.c */
extern void br_stp_enable_bridge(struct net_bridge *br);
extern void br_stp_disable_bridge(struct net_bridge *br);
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-21 21:22:44 +00:00
extern void br_stp_set_enabled(struct net_bridge *br, unsigned long val);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void br_stp_enable_port(struct net_bridge_port *p);
extern void br_stp_disable_port(struct net_bridge_port *p);
extern void br_stp_recalculate_bridge_id(struct net_bridge *br);
[BRIDGE]: allow setting hardware address of bridge pseudo-dev Some people are using bridging to hide multiple machines from an ISP that restricts by MAC address. So in that case allow the bridge mac address to be set to any of the existing interfaces. I don't want to allow any arbitrary value and confuse STP. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 02:51:49 +00:00
extern void br_stp_change_bridge_id(struct net_bridge *br, const unsigned char *a);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void br_stp_set_bridge_priority(struct net_bridge *br,
u16 newprio);
extern void br_stp_set_port_priority(struct net_bridge_port *p,
u8 newprio);
extern void br_stp_set_path_cost(struct net_bridge_port *p,
u32 path_cost);
extern ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id);
/* br_stp_bpdu.c */
bridge: Use STP demux Use the STP demux layer for receiving STP PDUs instead of directly registering with LLC. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-06 04:25:56 +00:00
struct stp_proto;
extern void br_stp_rcv(const struct stp_proto *proto, struct sk_buff *skb,
struct net_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_stp_timer.c */
extern void br_stp_timer_init(struct net_bridge *br);
extern void br_stp_port_timer_init(struct net_bridge_port *p);
extern unsigned long br_timer_value(const struct timer_list *timer);
/* br.c */
bridge: Simplify interface for ATM LANE This patch changes FDB entry check for ATM LANE bridge integration. There's no point in holding a FDB entry around SKB building. br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr() hook that checks if the addr has FDB entry pointing to other port to the one the request arrived on. FDB entry refcounting is removed as it's not used anywhere else. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-05 05:35:28 +00:00
#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
extern int (*br_fdb_test_addr_hook)(struct net_device *dev, unsigned char *addr);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
/* br_netlink.c */
[BRIDGE]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:59:03 +00:00
extern int br_netlink_init(void);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-25 23:00:12 +00:00
extern void br_netlink_fini(void);
extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_SYSFS
/* br_sysfs_if.c */
Driver core: Constify struct sysfs_ops in struct kobj_type Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-19 01:58:23 +00:00
extern const struct sysfs_ops brport_sysfs_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int br_sysfs_addif(struct net_bridge_port *p);
bridge: update sysfs link names if port device names have changed Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge. As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link. This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link. https://bugzilla.kernel.org/show_bug.cgi?id=12743 Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:11 +00:00
extern int br_sysfs_renameif(struct net_bridge_port *p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* br_sysfs_br.c */
extern int br_sysfs_addbr(struct net_device *dev);
extern void br_sysfs_delbr(struct net_device *dev);
#else
#define br_sysfs_addif(p) (0)
bridge: update sysfs link names if port device names have changed Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge. As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link. This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link. https://bugzilla.kernel.org/show_bug.cgi?id=12743 Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 09:31:11 +00:00
#define br_sysfs_renameif(p) (0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define br_sysfs_addbr(dev) (0)
#define br_sysfs_delbr(dev) do { } while(0)
#endif /* CONFIG_SYSFS */
#endif
Reference in New Issue Copy Permalink