davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
66d3239a4d
kernel-ark/drivers/pci/Kconfig

151 lines
4.1 KiB
Plaintext
Raw Normal View History

PCI: Add SPDX GPL-2.0 when no license was specified b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-26 17:45:16 +00:00
# SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# PCI configuration
#
PCI: Include pci/pcie/Kconfig directly from pci/Kconfig Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/pcie/Kconfig. Note that this effectively adds pci/pcie/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/pcie/Kconfig: alpha avr32 blackfin frv m32r m68k microblaze mn10300 parisc sparc unicore32 xtensa [bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace] Signed-off-by: Sasa Bogicevic <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-03 21:24:22 +00:00
source "drivers/pci/pcie/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
PCI/MSI: Move cached entry functions to irq core Required to support non PCI based MSI. [ tglx: Extracted from Jiangs patch series ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-12 11:11:25 +00:00
select GENERIC_MSI_IRQ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
This allows device drivers to enable MSI (Message Signaled
Interrupts). Message Signaled Interrupts enable a device to
generate an interrupt using an inbound Memory Write on its
PCI bus instead of asserting a device IRQ pin.
[PATCH] PCI: Provide a boot parameter to disable MSI Several drivers are starting to grow options to disable MSI. However, it's often a host chipset issue, not something which individual drivers should handle. So we add the pci=nomsi kernel parameter to allow the user to disable MSI modes for systems we haven't added to the quirk list yet. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-06 05:33:34 +00:00
Use of PCI MSI interrupts can be disabled at kernel boot time
by using the 'pci=nomsi' option. This disables MSI for the
entire system.
PCI: change PCI_MSI help text to recommend enabling Most current machines have no problem with this, and in fact many devices and features work best (or only!) with MSI. Reported-by: Petteri Räty <betelgeuse@gentoo.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-08 16:38:47 +00:00
If you don't know what to do here, say Y.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PCI/MSI: Enhance core to support hierarchy irqdomain Enhance PCI MSI core to support hierarchy irqdomain, so the common code can be shared across architectures. [ tglx: Extracted and combined from several patches ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-11 13:02:18 +00:00
config PCI_MSI_IRQ_DOMAIN
PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for ARC Add ARC as an arch that supports PCI_MSI_IRQ_DOMAIN and add generation of msi.h in the ARC arch. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-09 15:49:37 +00:00
def_bool ARC || ARM || ARM64 || X86
PCI/MSI: Enhance core to support hierarchy irqdomain Enhance PCI MSI core to support hierarchy irqdomain, so the common code can be shared across architectures. [ tglx: Extracted and combined from several patches ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-11 13:02:18 +00:00
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
PCI: Move PCI_QUIRKS to the PCI bus menu Localize PCI_QUIRKS in the PCI bus menu. Move PCI_QUIRKS to the PCI bus menu instead of the (often broken) General Setup EXPERT menu. The prompt still depends on EXPERT. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-02 22:14:02 +00:00
config PCI_QUIRKS
default y
bool "Enable PCI quirk workarounds" if EXPERT
depends on PCI
help
This enables workarounds for various PCI chipset bugs/quirks.
Disable this only if your target machine is unaffected by PCI
quirks.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
help
Say Y here if you want the PCI core to produce a bunch of debug
messages to the system log. Select this if you are having a
problem with PCI support and want to see more of what is going on.
When in doubt, say N.
PCI: add a PCI resource reallocation config option Add a new config option, PCI_REALLOC_ENABLE_AUTO, which will automatically try to re-allocate PCI resources if PCI_IOV support is enabled and the SR-IOV resources are unassigned. Behavior can still be controlled using the pci=realloc= parameter. -v2: According to Jesse, adding one CONFIG option for distribution to disable it or enable it. -v3: update Kconfig text (jbarnes) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24 03:23:32 +00:00
config PCI_REALLOC_ENABLE_AUTO
bool "Enable PCI resource re-allocation detection"
depends on PCI
PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO Ensure only valid Kconfig configurations for PCI_REALLOC_ENABLE_AUTO. This is done by selecting PCI_IOV, which is required by PCI_REALLOC_ENABLE_AUTO to work. Signed-off-by: Sascha El-Sharkawy <elscha@sse.uni-hildesheim.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-20 06:44:20 +00:00
depends on PCI_IOV
PCI: add a PCI resource reallocation config option Add a new config option, PCI_REALLOC_ENABLE_AUTO, which will automatically try to re-allocate PCI resources if PCI_IOV support is enabled and the SR-IOV resources are unassigned. Behavior can still be controlled using the pci=realloc= parameter. -v2: According to Jesse, adding one CONFIG option for distribution to disable it or enable it. -v3: update Kconfig text (jbarnes) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24 03:23:32 +00:00
help
Say Y here if you want the PCI core to detect if PCI resource
re-allocation needs to be enabled. You can always use pci=realloc=on
PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO Ensure only valid Kconfig configurations for PCI_REALLOC_ENABLE_AUTO. This is done by selecting PCI_IOV, which is required by PCI_REALLOC_ENABLE_AUTO to work. Signed-off-by: Sascha El-Sharkawy <elscha@sse.uni-hildesheim.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-09-20 06:44:20 +00:00
or pci=realloc=off to override it. It will automatically
re-allocate PCI resources if SR-IOV BARs have not been allocated by
the BIOS.
PCI: add a PCI resource reallocation config option Add a new config option, PCI_REALLOC_ENABLE_AUTO, which will automatically try to re-allocate PCI resources if PCI_IOV support is enabled and the SR-IOV resources are unassigned. Behavior can still be controlled using the pci=realloc= parameter. -v2: According to Jesse, adding one CONFIG option for distribution to disable it or enable it. -v3: update Kconfig text (jbarnes) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24 03:23:32 +00:00
When in doubt, say N.
PCI: pci-stub module to reserve pci device When doing device assignment with KVM there's currently nothing to protect the device from having a driver in the host as well as the guest. This trivial module just binds the pci device on the host to a stub driver so that a real host driver can't bind to the device. It has no pci id table, it supports only dynamic ids. # echo "8086 10f5" > /sys/bus/pci/drivers/pci-stub/new_id # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/pci-stub/bind # ls -l /sys/bus/pci/devices/0000:00:19.0/driver lrwxrwxrwx 1 root root 0 2008-11-25 19:10 /sys/bus/pci/devices/0000:00:19.0/driver -> ../../../bus/pci/drivers/pci-stub Cc: "Kay, Allen M" <allen.m.kay@intel.com> Cc: "Nakajima, Jun" <jun.nakajima@intel.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-26 05:17:13 +00:00
config PCI_STUB
tristate "PCI Stub driver"
depends on PCI
help
Say Y or M here if you want be able to reserve a PCI device
when it is going to be assigned to a guest operating system.
When in doubt, say N.
PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs Some SR-IOV PF devices provide no functionality other than acting as a means of enabling VFs. For these devices, we want to enable the VFs and assign them to guest virtual machines, but there's no need to have a driver for the PF itself. Add a new pci-pf-stub driver to claim those PF devices and provide the generic VF enable functionality. An administrator can use the sysfs "sriov_numvfs" file to enable VFs, then assign them to guests. For now I only have one example ID provided by Amazon in terms of devices that require this functionality. The general idea is that in the future we will see other devices added as vendors come up with devices where the PF is more or less just a lightweight shim used to allocate VFs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-04-24 21:47:16 +00:00
config PCI_PF_STUB
tristate "PCI PF Stub driver"
depends on PCI
depends on PCI_IOV
help
Say Y or M here if you want to enable support for devices that
require SR-IOV support, while at the same time the PF itself is
not providing any actual services on the host itself such as
storage or networking.
When in doubt, say N.
xen-pcifront: Xen PCI frontend driver. This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>
2010-08-03 01:31:05 +00:00
config XEN_PCIDEV_FRONTEND
tristate "Xen PCI Frontend"
depends on PCI && X86 && XEN
select PCI_XEN
xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-12-11 03:33:15 +00:00
select XEN_XENBUS_FRONTEND
xen-pcifront: Xen PCI frontend driver. This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>
2010-08-03 01:31:05 +00:00
default y
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
PCI: Move ATS implementation into own file ATS does not depend on IOV support, so move the code into its own file. This file will also include support for the PRI and PASID capabilities later. Also give ATS its own Kconfig variable to allow selecting it without IOV support. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 13:57:13 +00:00
config PCI_ATS
bool
PCI: Provide common functions for ECAM mapping Add config option PCI_ECAM and file drivers/pci/ecam.c to provide generic functions for accessing memory-mapped PCI config space. The API is defined in drivers/pci/ecam.h and is written to replace the API in drivers/pci/host/pci-host-common.h. The file defines a new 'struct pci_config_window' to hold the information related to a PCI config area and its mapping. This structure is expected to be used as sysdata for controllers that have ECAM based mapping. Helper functions are provided to setup the mapping, free the mapping and to implement the map_bus method in 'struct pci_ops' Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-05-10 15:19:51 +00:00
config PCI_ECAM
bool
PCI: Provide Kconfig option for lockless config space accessors The generic PCI configuration space accessors are globally serialized via pci_lock. On larger systems this causes massive lock contention when the configuration space has to be accessed frequently. One such access pattern is the Intel Uncore performance counter unit. Provide a kernel config option which can be selected by an architecture when the low level PCI configuration space accessors in the architecture use their own serialization or can operate completely lockless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/20170316215057.205961140@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-16 21:50:06 +00:00
config PCI_LOCKLESS_CONFIG
bool
PCI: initialize and release SR-IOV capability If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 03:25:11 +00:00
config PCI_IOV
bool "PCI IOV support"
depends on PCI
PCI: Move ATS implementation into own file ATS does not depend on IOV support, so move the code into its own file. This file will also include support for the PRI and PASID capabilities later. Also give ATS its own Kconfig variable to allow selecting it without IOV support. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 13:57:13 +00:00
select PCI_ATS
PCI: initialize and release SR-IOV capability If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 03:25:11 +00:00
help
I/O Virtualization is a PCI feature supported by some devices
which allows them to create virtual devices which share their
physical resources.
If unsure, say N.
PCI hotplug: move IOAPIC support from acpiphp to ioapic driver This patch moves PCI I/O APIC support from acpiphp to a separate driver. Like pciehp and shpchp, acpiphp handles PCI hotplug, i.e., addition and removal of PCI adapters. But in addition, acpiphp handles some ACPI hotplug, such as the addition of new host bridges, and the I/O APIC support was tangled up with that. I don't think the I/O APIC support needs to be in acpiphp; PCI I/O APICs usually appear as a function on a PCI host bridge, and we'll enumerate the APIC before any of the devices behind the bridge that use it. As far as I know, nobody actually uses I/O APIC hotplug. It depends on acpi_register_ioapic(), which is only implemented for ia64, and I don't think any vendors have supported I/O chassis hotplug yet. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> CC: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-26 17:20:47 +00:00
PCI: Add implementation for PRI capability Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 13:57:15 +00:00
config PCI_PRI
bool "PCI PRI support"
PCI: Let PCI_PRI depend on PCI This avoids the PCI_PRI question in 'make config' when PCI is not selected. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-30 15:35:07 +00:00
depends on PCI
PCI: Add implementation for PRI capability Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 13:57:15 +00:00
select PCI_ATS
help
PRI is the PCI Page Request Interface. It allows PCI devices that are
behind an IOMMU to recover from page faults.
If unsure, say N.
PCI: Add support for PASID capability Devices supporting Process Address Space Identifiers (PASIDs) can use an IOMMU to access multiple IO address spaces at the same time. A PCIe device indicates support for this feature by implementing the PASID capability. This patch adds support for the capability to the Linux kernel. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 13:57:16 +00:00
config PCI_PASID
bool "PCI PASID support"
depends on PCI
select PCI_ATS
help
Process Address Space Identifiers (PASIDs) can be used by PCI devices
to access more than one IO address space at the same time. To make
use of this feature an IOMMU is required which also supports PASIDs.
Select this option if you have such an IOMMU and want to compile the
driver for it into your kernel.
If unsure, say N.
PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig Create a kconfig option symbol for PCI_LABEL and enable it when DMI || ACPI are enabled. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-29 16:45:57 +00:00
config PCI_LABEL
def_bool y if (DMI || ACPI)
PCI: Regroup all PCI related entries into drivers/pci/Makefile Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries from drivers/Makefile into drivers/pci/Makefile. Since we don't want to introduce any dependency between CONFIG_PCI and CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile. Hence all Makefiles in drivers/pci/ were updated accordingly so no file is compiled when CONFIG_PCI is not defined. Also, we add a comment to reinforce that EPC and EPF libraries must be initialized before their users. Hence built-in EPC drivers, such as those of Designware, are linked after the endpoint core libraries. Finally, we add another comment to explain why obj-y has been chosen instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-30 20:56:49 +00:00
depends on PCI
PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig Create a kconfig option symbol for PCI_LABEL and enable it when DMI || ACPI are enabled. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-29 16:45:57 +00:00
select NLS
pci: PCIe driver for Marvell Armada 370/XP systems This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-16 15:55:22 +00:00
PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs Add a new driver which exposes a root PCI bus whenever a PCI Express device is passed through to a guest VM under Hyper-V. The device can be single- or multi-function. The interrupts for the devices are managed by an IRQ domain, implemented within the driver. [bhelgaas: fold in race condition fix (http://lkml.kernel.org/r/1456340196-13717-1-git-send-email-jakeo@microsoft.com)] Signed-off-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-16 21:56:23 +00:00
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
depends on PCI && X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
PCI: Restore inclusion of pci/hotplug Kconfig Commit e7e127e3c767 ("PCI: Include pci/hotplug Kconfig directly from pci/Kconfig") added one line to pci/Kconfig. However, for some mysterious reason it isn't there now, even though there are no traces of removing it in the git log. I detected this issue when 'make oldconfig' removed all the options that depended on HOTPLUG_PCI. [bhelgaas: I botched the cfeb8139a1fb ("Merge branch 'pci/host-hv' into next") merge. "git diff cfeb8139a1fb^ cfeb8139a1fb" shows a conflict in drivers/pci/Kconfig, and I mistakenly dropped the hotplug/Kconfig piece.] Signed-off-by: Tero Roponen <tero.roponen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-21 07:26:41 +00:00
source "drivers/pci/hotplug/Kconfig"
PCI: Collect all native drivers under drivers/pci/controller/ Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-31 01:12:37 +00:00
source "drivers/pci/controller/Kconfig"
PCI: endpoint: Add EP core layer to enable EP controller and EP functions Introduce a new EP core layer in order to support endpoint functions in linux kernel. This comprises the EPC library (Endpoint Controller Library) and EPF library (Endpoint Function Library). EPC library implements functions specific to an endpoint controller and EPF library implements functions specific to an endpoint function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-10 13:55:10 +00:00
source "drivers/pci/endpoint/Kconfig"
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 00:30:54 +00:00
source "drivers/pci/switch/Kconfig"
Reference in New Issue Copy Permalink