kernel-ark/include/linux/elevator.h

212 lines
6.7 KiB
C
Raw Normal View History

#ifndef _LINUX_ELEVATOR_H
#define _LINUX_ELEVATOR_H
#include <linux/percpu.h>
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 18:45:40 +00:00
#ifdef CONFIG_BLOCK
typedef int (elevator_merge_fn) (struct request_queue *, struct request **,
struct bio *);
typedef void (elevator_merge_req_fn) (struct request_queue *, struct request *, struct request *);
typedef void (elevator_merged_fn) (struct request_queue *, struct request *, int);
typedef int (elevator_allow_merge_fn) (struct request_queue *, struct request *, struct bio *);
typedef int (elevator_dispatch_fn) (struct request_queue *, int);
typedef void (elevator_add_req_fn) (struct request_queue *, struct request *);
typedef int (elevator_queue_empty_fn) (struct request_queue *);
typedef struct request *(elevator_request_list_fn) (struct request_queue *, struct request *);
typedef void (elevator_completed_req_fn) (struct request_queue *, struct request *);
typedef int (elevator_may_queue_fn) (struct request_queue *, int);
typedef int (elevator_set_req_fn) (struct request_queue *, struct request *, gfp_t);
typedef void (elevator_put_req_fn) (struct request *);
typedef void (elevator_activate_req_fn) (struct request_queue *, struct request *);
typedef void (elevator_deactivate_req_fn) (struct request_queue *, struct request *);
typedef void *(elevator_init_fn) (struct request_queue *);
typedef void (elevator_exit_fn) (struct elevator_queue *);
struct elevator_ops
{
elevator_merge_fn *elevator_merge_fn;
elevator_merged_fn *elevator_merged_fn;
elevator_merge_req_fn *elevator_merge_req_fn;
elevator_allow_merge_fn *elevator_allow_merge_fn;
elevator_dispatch_fn *elevator_dispatch_fn;
elevator_add_req_fn *elevator_add_req_fn;
elevator_activate_req_fn *elevator_activate_req_fn;
elevator_deactivate_req_fn *elevator_deactivate_req_fn;
elevator_queue_empty_fn *elevator_queue_empty_fn;
elevator_completed_req_fn *elevator_completed_req_fn;
elevator_request_list_fn *elevator_former_req_fn;
elevator_request_list_fn *elevator_latter_req_fn;
elevator_set_req_fn *elevator_set_req_fn;
elevator_put_req_fn *elevator_put_req_fn;
elevator_may_queue_fn *elevator_may_queue_fn;
elevator_init_fn *elevator_init_fn;
elevator_exit_fn *elevator_exit_fn;
void (*trim)(struct io_context *);
};
#define ELV_NAME_MAX (16)
struct elv_fs_entry {
struct attribute attr;
ssize_t (*show)(struct elevator_queue *, char *);
ssize_t (*store)(struct elevator_queue *, const char *, size_t);
};
/*
* identifies an elevator type, such as AS or deadline
*/
struct elevator_type
{
struct list_head list;
struct elevator_ops ops;
struct elv_fs_entry *elevator_attrs;
char elevator_name[ELV_NAME_MAX];
struct module *elevator_owner;
};
/*
* each queue has an elevator_queue associated with it
*/
struct elevator_queue
{
struct elevator_ops *ops;
void *elevator_data;
struct kobject kobj;
struct elevator_type *elevator_type;
struct mutex sysfs_lock;
struct hlist_head *hash;
};
/*
* block elevator interface
*/
extern void elv_dispatch_sort(struct request_queue *, struct request *);
extern void elv_dispatch_add_tail(struct request_queue *, struct request *);
extern void elv_add_request(struct request_queue *, struct request *, int, int);
extern void __elv_add_request(struct request_queue *, struct request *, int, int);
extern void elv_insert(struct request_queue *, struct request *, int);
extern int elv_merge(struct request_queue *, struct request **, struct bio *);
extern void elv_merge_requests(struct request_queue *, struct request *,
struct request *);
extern void elv_merged_request(struct request_queue *, struct request *, int);
extern void elv_requeue_request(struct request_queue *, struct request *);
extern int elv_queue_empty(struct request_queue *);
extern struct request *elv_former_request(struct request_queue *, struct request *);
extern struct request *elv_latter_request(struct request_queue *, struct request *);
extern int elv_register_queue(struct request_queue *q);
extern void elv_unregister_queue(struct request_queue *q);
extern int elv_may_queue(struct request_queue *, int);
extern void elv_abort_queue(struct request_queue *);
extern void elv_completed_request(struct request_queue *, struct request *);
extern int elv_set_request(struct request_queue *, struct request *, gfp_t);
extern void elv_put_request(struct request_queue *, struct request *);
extern void elv_drain_elevator(struct request_queue *);
/*
* io scheduler registration
*/
extern void elv_register(struct elevator_type *);
extern void elv_unregister(struct elevator_type *);
/*
* io scheduler sysfs switching
*/
extern ssize_t elv_iosched_show(struct request_queue *, char *);
extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
extern int elevator_init(struct request_queue *, char *);
extern void elevator_exit(struct elevator_queue *);
extern int elv_rq_merge_ok(struct request *, struct bio *);
/*
* Helper functions.
*/
extern struct request *elv_rb_former_request(struct request_queue *, struct request *);
extern struct request *elv_rb_latter_request(struct request_queue *, struct request *);
/*
* rb support functions.
*/
extern struct request *elv_rb_add(struct rb_root *, struct request *);
extern void elv_rb_del(struct rb_root *, struct request *);
extern struct request *elv_rb_find(struct rb_root *, sector_t);
/*
* Return values from elevator merger
*/
#define ELEVATOR_NO_MERGE 0
#define ELEVATOR_FRONT_MERGE 1
#define ELEVATOR_BACK_MERGE 2
/*
* Insertion selection
*/
#define ELEVATOR_INSERT_FRONT 1
#define ELEVATOR_INSERT_BACK 2
#define ELEVATOR_INSERT_SORT 3
#define ELEVATOR_INSERT_REQUEUE 4
/*
* return values from elevator_may_queue_fn
*/
enum {
ELV_MQUEUE_MAY,
ELV_MQUEUE_NO,
ELV_MQUEUE_MUST,
};
block: drop request->hard_* and *nr_sectors struct request has had a few different ways to represent some properties of a request. ->hard_* represent block layer's view of the request progress (completion cursor) and the ones without the prefix are supposed to represent the issue cursor and allowed to be updated as necessary by the low level drivers. The thing is that as block layer supports partial completion, the two cursors really aren't necessary and only cause confusion. In addition, manual management of request detail from low level drivers is cumbersome and error-prone at the very least. Another interesting duplicate fields are rq->[hard_]nr_sectors and rq->{hard_cur|current}_nr_sectors against rq->data_len and rq->bio->bi_size. This is more convoluted than the hard_ case. rq->[hard_]nr_sectors are initialized for requests with bio but blk_rq_bytes() uses it only for !pc requests. rq->data_len is initialized for all request but blk_rq_bytes() uses it only for pc requests. This causes good amount of confusion throughout block layer and its drivers and determining the request length has been a bit of black magic which may or may not work depending on circumstances and what the specific LLD is actually doing. rq->{hard_cur|current}_nr_sectors represent the number of sectors in the contiguous data area at the front. This is mainly used by drivers which transfers data by walking request segment-by-segment. This value always equals rq->bio->bi_size >> 9. However, data length for pc requests may not be multiple of 512 bytes and using this field becomes a bit confusing. In general, having multiple fields to represent the same property leads only to confusion and subtle bugs. With recent block low level driver cleanups, no driver is accessing or manipulating these duplicate fields directly. Drop all the duplicates. Now rq->sector means the current sector, rq->data_len the current total length and rq->bio->bi_size the current segment length. Everything else is defined in terms of these three and available only through accessors. * blk_recalc_rq_sectors() is collapsed into blk_update_request() and now handles pc and fs requests equally other than rq->sector update. This means that now pc requests can use partial completion too (no in-kernel user yet tho). * bio_cur_sectors() is replaced with bio_cur_bytes() as block layer now uses byte count as the primary data length. * blk_rq_pos() is now guranteed to be always correct. In-block users converted. * blk_rq_bytes() is now guaranteed to be always valid as is blk_rq_sectors(). In-block users converted. * blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9. More convenient one is used. * blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const pointer to request. [ Impact: API cleanup, single way to represent one property of a request ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 13:24:41 +00:00
#define rq_end_sector(rq) (blk_rq_pos(rq) + blk_rq_sectors(rq))
#define rb_entry_rq(node) rb_entry((node), struct request, rb_node)
/*
* Hack to reuse the csd.list list_head as the fifo time holder while
* the request is in the io scheduler. Saves an unsigned long in rq.
*/
#define rq_fifo_time(rq) ((unsigned long) (rq)->csd.list.next)
#define rq_set_fifo_time(rq,exp) ((rq)->csd.list.next = (void *) (exp))
#define rq_entry_fifo(ptr) list_entry((ptr), struct request, queuelist)
#define rq_fifo_clear(rq) do { \
list_del_init(&(rq)->queuelist); \
INIT_LIST_HEAD(&(rq)->csd.list); \
} while (0)
/*
* io context count accounting
*/
#define elv_ioc_count_mod(name, __val) \
do { \
preempt_disable(); \
__get_cpu_var(name) += (__val); \
preempt_enable(); \
} while (0)
#define elv_ioc_count_inc(name) elv_ioc_count_mod(name, 1)
#define elv_ioc_count_dec(name) elv_ioc_count_mod(name, -1)
#define elv_ioc_count_read(name) \
({ \
unsigned long __val = 0; \
int __cpu; \
smp_wmb(); \
for_each_possible_cpu(__cpu) \
__val += per_cpu(name, __cpu); \
__val; \
})
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 18:45:40 +00:00
#endif /* CONFIG_BLOCK */
#endif