kernel-ark/arch/mips/lasat/setup.c

183 lines
4.6 KiB
C
Raw Normal View History

/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
*
* Thomas Horsten <thh@lasat.com>
* Copyright (C) 2000 LASAT Networks A/S.
*
* Brian Murphy <brian@murphy.dk>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Lasat specific setup.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/time.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/lasat/lasat.h>
#include <asm/lasat/serial.h>
#ifdef CONFIG_PICVUE
#include <linux/notifier.h>
#endif
#include "ds1603.h"
#include <asm/lasat/ds1603.h>
#include <asm/lasat/picvue.h>
#include <asm/lasat/eeprom.h>
#include "prom.h"
int lasat_command_line = 0;
void lasatint_init(void);
extern void lasat_reboot_setup(void);
extern void pcisetup(void);
extern void edhac_init(void *, void *, void *);
extern void addrflt_init(void);
struct lasat_misc lasat_misc_info[N_MACHTYPES] = {
{(void *)KSEG1ADDR(0x1c840000), (void *)KSEG1ADDR(0x1c800000), 2},
{(void *)KSEG1ADDR(0x11080000), (void *)KSEG1ADDR(0x11000000), 6}
};
struct lasat_misc *lasat_misc = NULL;
#ifdef CONFIG_DS1603
static struct ds_defs ds_defs[N_MACHTYPES] = {
{ (void *)DS1603_REG_100, (void *)DS1603_REG_100,
DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100,
DS1603_DATA_SHIFT_100, 0, 0 },
{ (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200,
DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200,
DS1603_DATA_READ_SHIFT_200, 1, 2000 }
};
#endif
#ifdef CONFIG_PICVUE
#include "picvue.h"
static struct pvc_defs pvc_defs[N_MACHTYPES] = {
{ (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100,
PVC_E_100, PVC_RW_100, PVC_RS_100 },
{ (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200,
PVC_E_200, PVC_RW_200, PVC_RS_200 }
};
#endif
static int lasat_panic_display(struct notifier_block *this,
unsigned long event, void *ptr)
{
#ifdef CONFIG_PICVUE
unsigned char *string = ptr;
if (string == NULL)
string = "Kernel Panic";
pvc_dump_string(string);
#endif
return NOTIFY_DONE;
}
static int lasat_panic_prom_monitor(struct notifier_block *this,
unsigned long event, void *ptr)
{
prom_monitor();
return NOTIFY_DONE;
}
static struct notifier_block lasat_panic_block[] =
{
{ lasat_panic_display, NULL, INT_MAX },
{ lasat_panic_prom_monitor, NULL, INT_MIN }
};
static void lasat_time_init(void)
{
mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
}
void __init plat_timer_setup(struct irqaction *irq)
{
change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
}
#define DYNAMIC_SERIAL_INIT
#ifdef DYNAMIC_SERIAL_INIT
void __init serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
struct uart_port s;
memset(&s, 0, sizeof(s));
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
s.iotype = UPIO_MEM;
if (mips_machtype == MACH_LASAT_100) {
s.uartclk = LASAT_BASE_BAUD_100 * 16;
s.irq = LASATINT_UART_100;
s.regshift = LASAT_UART_REGS_SHIFT_100;
s.membase = (char *)KSEG1ADDR(LASAT_UART_REGS_BASE_100);
} else {
s.uartclk = LASAT_BASE_BAUD_200 * 16;
s.irq = LASATINT_UART_200;
s.regshift = LASAT_UART_REGS_SHIFT_200;
s.membase = (char *)KSEG1ADDR(LASAT_UART_REGS_BASE_200);
}
if (early_serial_setup(&s) != 0)
printk(KERN_ERR "Serial setup failed!\n");
#endif
}
#endif
void __init plat_mem_setup(void)
{
int i;
lasat_misc = &lasat_misc_info[mips_machtype];
#ifdef CONFIG_PICVUE
picvue = &pvc_defs[mips_machtype];
#endif
/* Set up panic notifier */
for (i = 0; i < sizeof(lasat_panic_block) / sizeof(struct notifier_block); i++)
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
atomic_notifier_chain_register(&panic_notifier_list,
&lasat_panic_block[i]);
lasat_reboot_setup();
board_time_init = lasat_time_init;
#ifdef CONFIG_DS1603
ds1603 = &ds_defs[mips_machtype];
rtc_mips_get_time = ds1603_read;
rtc_mips_set_time = ds1603_set;
#endif
#ifdef DYNAMIC_SERIAL_INIT
serial_init();
#endif
/* Switch from prom exception handler to normal mode */
change_c0_status(ST0_BEV,0);
pr_info("Lasat specific initialization complete\n");
}