kernel-ark/mm/filemap_xip.c

476 lines
11 KiB
C
Raw Normal View History

/*
* linux/mm/filemap_xip.c
*
* Copyright (C) 2005 IBM Corporation
* Author: Carsten Otte <cotte@de.ibm.com>
*
* derived from linux/mm/filemap.c - Copyright (C) Linus Torvalds
*
*/
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/module.h>
#include <linux/uio.h>
#include <linux/rmap.h>
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
#include <linux/mmu_notifier.h>
#include <linux/sched.h>
#include <linux/seqlock.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
/*
* We do use our own empty page to avoid interference with other users
* of ZERO_PAGE(), such as /dev/zero
*/
static DEFINE_MUTEX(xip_sparse_mutex);
static seqcount_t xip_sparse_seq = SEQCNT_ZERO;
static struct page *__xip_sparse_page;
/* called under xip_sparse_mutex */
static struct page *xip_sparse_page(void)
{
if (!__xip_sparse_page) {
struct page *page = alloc_page(GFP_HIGHUSER | __GFP_ZERO);
if (page)
__xip_sparse_page = page;
}
return __xip_sparse_page;
}
/*
* This is a file read routine for execute in place files, and uses
* the mapping->a_ops->get_xip_mem() function for the actual low-level
* stuff.
*
* Note the struct file* is not used at all. It may be NULL.
*/
static ssize_t
do_xip_mapping_read(struct address_space *mapping,
struct file_ra_state *_ra,
struct file *filp,
char __user *buf,
size_t len,
loff_t *ppos)
{
struct inode *inode = mapping->host;
pgoff_t index, end_index;
unsigned long offset;
loff_t isize, pos;
size_t copied = 0, error = 0;
BUG_ON(!mapping->a_ops->get_xip_mem);
pos = *ppos;
index = pos >> PAGE_CACHE_SHIFT;
offset = pos & ~PAGE_CACHE_MASK;
isize = i_size_read(inode);
if (!isize)
goto out;
end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
do {
unsigned long nr, left;
void *xip_mem;
unsigned long xip_pfn;
int zero = 0;
/* nr is the maximum number of bytes to copy from this page */
nr = PAGE_CACHE_SIZE;
if (index >= end_index) {
if (index > end_index)
goto out;
nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
if (nr <= offset) {
goto out;
}
}
nr = nr - offset;
mm: do_xip_mapping_read: fix length calculation The calculation of the value nr in do_xip_mapping_read is incorrect. If the copy required more than one iteration in the do while loop the copies variable will be non-zero. The maximum length that may be passed to the call to copy_to_user(buf+copied, xip_mem+offset, nr) is len-copied but the check only compares against (nr > len). This bug is the cause for the heap corruption Carsten has been chasing for so long: *** glibc detected *** /bin/bash: free(): invalid next size (normal): 0x00000000800e39f0 *** ======= Backtrace: ========= /lib64/libc.so.6[0x200000b9b44] /lib64/libc.so.6(cfree+0x8e)[0x200000bdade] /bin/bash(free_buffered_stream+0x32)[0x80050e4e] /bin/bash(close_buffered_stream+0x1c)[0x80050ea4] /bin/bash(unset_bash_input+0x2a)[0x8001c366] /bin/bash(make_child+0x1d4)[0x8004115c] /bin/bash[0x8002fc3c] /bin/bash(execute_command_internal+0x656)[0x8003048e] /bin/bash(execute_command+0x5e)[0x80031e1e] /bin/bash(execute_command_internal+0x79a)[0x800305d2] /bin/bash(execute_command+0x5e)[0x80031e1e] /bin/bash(reader_loop+0x270)[0x8001efe0] /bin/bash(main+0x1328)[0x8001e960] /lib64/libc.so.6(__libc_start_main+0x100)[0x200000592a8] /bin/bash(clearerr+0x5e)[0x8001c092] With this bug fix the commit 0e4a9b59282914fe057ab17027f55123964bc2e2 "ext2/xip: refuse to change xip flag during remount with busy inodes" can be removed again. Cc: Carsten Otte <cotte@de.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:56:42 +00:00
if (nr > len - copied)
nr = len - copied;
error = mapping->a_ops->get_xip_mem(mapping, index, 0,
&xip_mem, &xip_pfn);
if (unlikely(error)) {
if (error == -ENODATA) {
/* sparse */
zero = 1;
} else
goto out;
}
/* If users can be writing to this page using arbitrary
* virtual addresses, take care about potential aliasing
* before reading the page on the kernel side.
*/
if (mapping_writably_mapped(mapping))
/* address based flush */ ;
/*
* Ok, we have the mem, so now we can copy it to user space...
*
* The actor routine returns how many bytes were actually used..
* NOTE! This may not be the same as how much of a user buffer
* we filled up (we may be padding etc), so we can only update
* "pos" here (the actor routine has to update the user buffer
* pointers and the remaining count).
*/
if (!zero)
left = __copy_to_user(buf+copied, xip_mem+offset, nr);
else
left = __clear_user(buf + copied, nr);
if (left) {
error = -EFAULT;
goto out;
}
copied += (nr - left);
offset += (nr - left);
index += offset >> PAGE_CACHE_SHIFT;
offset &= ~PAGE_CACHE_MASK;
} while (copied < len);
out:
*ppos = pos + copied;
if (filp)
file_accessed(filp);
return (copied ? copied : error);
}
ssize_t
xip_file_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos)
{
if (!access_ok(VERIFY_WRITE, buf, len))
return -EFAULT;
return do_xip_mapping_read(filp->f_mapping, &filp->f_ra, filp,
buf, len, ppos);
}
EXPORT_SYMBOL_GPL(xip_file_read);
/*
* __xip_unmap is invoked from xip_unmap and
* xip_write
*
* This function walks all vmas of the address_space and unmaps the
* __xip_sparse_page when found at pgoff.
*/
static void
__xip_unmap (struct address_space * mapping,
unsigned long pgoff)
{
struct vm_area_struct *vma;
struct mm_struct *mm;
struct prio_tree_iter iter;
unsigned long address;
pte_t *pte;
pte_t pteval;
spinlock_t *ptl;
struct page *page;
unsigned count;
int locked = 0;
count = read_seqcount_begin(&xip_sparse_seq);
page = __xip_sparse_page;
if (!page)
return;
retry:
mutex_lock(&mapping->i_mmap_mutex);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
mm = vma->vm_mm;
address = vma->vm_start +
((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
mm: dirty page tracking race fix There is a race with dirty page accounting where a page may not properly be accounted for. clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty. page_mkclean walks the rmaps for that page, and for each one it cleans and write protects the pte if it was dirty. It uses page_check_address to find the pte. That function has a shortcut to avoid the ptl if the pte is not present. Unfortunately, the pte can be switched to not-present then back to present by other code while holding the page table lock -- this should not be a signal for page_mkclean to ignore that pte, because it may be dirty. For example, powerpc64's set_pte_at will clear a previously present pte before setting it to the desired value. There may also be other code in core mm or in arch which do similar things. The consequence of the bug is loss of data integrity due to msync, and loss of dirty page accounting accuracy. XIP's __xip_unmap could easily also be unreliable (depending on the exact XIP locking scheme), which can lead to data corruption. Fix this by having an option to always take ptl to check the pte in page_check_address. It's possible to retain this optimization for page_referenced and try_to_unmap. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Carsten Otte <cotte@freenet.de> Cc: Hugh Dickins <hugh@veritas.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 21:09:18 +00:00
pte = page_check_address(page, mm, address, &ptl, 1);
if (pte) {
/* Nuke the page table entry. */
flush_cache_page(vma, address, pte_pfn(*pte));
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
pteval = ptep_clear_flush_notify(vma, address, pte);
page_remove_rmap(page);
dec_mm_counter(mm, MM_FILEPAGES);
BUG_ON(pte_dirty(pteval));
pte_unmap_unlock(pte, ptl);
2005-10-30 01:16:12 +00:00
page_cache_release(page);
}
}
mutex_unlock(&mapping->i_mmap_mutex);
if (locked) {
mutex_unlock(&xip_sparse_mutex);
} else if (read_seqcount_retry(&xip_sparse_seq, count)) {
mutex_lock(&xip_sparse_mutex);
locked = 1;
goto retry;
}
}
/*
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
* xip_fault() is invoked via the vma operations vector for a
* mapped memory region to read in file data during a page fault.
*
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
* This function is derived from filemap_fault, but used for execute in place
*/
static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct file *file = vma->vm_file;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
pgoff_t size;
void *xip_mem;
unsigned long xip_pfn;
struct page *page;
int error;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
/* XXX: are VM_FAULT_ codes OK? */
again:
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (vmf->pgoff >= size)
return VM_FAULT_SIGBUS;
error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
&xip_mem, &xip_pfn);
if (likely(!error))
goto found;
if (error != -ENODATA)
return VM_FAULT_OOM;
/* sparse block */
if ((vma->vm_flags & (VM_WRITE | VM_MAYWRITE)) &&
(vma->vm_flags & (VM_SHARED | VM_MAYSHARE)) &&
(!(mapping->host->i_sb->s_flags & MS_RDONLY))) {
int err;
/* maybe shared writable, allocate new block */
mutex_lock(&xip_sparse_mutex);
error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 1,
&xip_mem, &xip_pfn);
mutex_unlock(&xip_sparse_mutex);
if (error)
return VM_FAULT_SIGBUS;
/* unmap sparse mappings at pgoff from all other vmas */
__xip_unmap(mapping, vmf->pgoff);
found:
err = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address,
xip_pfn);
if (err == -ENOMEM)
return VM_FAULT_OOM;
BUG_ON(err);
return VM_FAULT_NOPAGE;
} else {
int err, ret = VM_FAULT_OOM;
mutex_lock(&xip_sparse_mutex);
write_seqcount_begin(&xip_sparse_seq);
error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
&xip_mem, &xip_pfn);
if (unlikely(!error)) {
write_seqcount_end(&xip_sparse_seq);
mutex_unlock(&xip_sparse_mutex);
goto again;
}
if (error != -ENODATA)
goto out;
/* not shared and writable, use xip_sparse_page() */
page = xip_sparse_page();
if (!page)
goto out;
err = vm_insert_page(vma, (unsigned long)vmf->virtual_address,
page);
if (err == -ENOMEM)
goto out;
ret = VM_FAULT_NOPAGE;
out:
write_seqcount_end(&xip_sparse_seq);
mutex_unlock(&xip_sparse_mutex);
return ret;
}
}
static const struct vm_operations_struct xip_file_vm_ops = {
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
.fault = xip_file_fault,
};
int xip_file_mmap(struct file * file, struct vm_area_struct * vma)
{
BUG_ON(!file->f_mapping->a_ops->get_xip_mem);
file_accessed(file);
vma->vm_ops = &xip_file_vm_ops;
vma->vm_flags |= VM_CAN_NONLINEAR | VM_MIXEDMAP;
return 0;
}
EXPORT_SYMBOL_GPL(xip_file_mmap);
static ssize_t
__xip_file_write(struct file *filp, const char __user *buf,
size_t count, loff_t pos, loff_t *ppos)
{
struct address_space * mapping = filp->f_mapping;
const struct address_space_operations *a_ops = mapping->a_ops;
struct inode *inode = mapping->host;
long status = 0;
size_t bytes;
ssize_t written = 0;
BUG_ON(!mapping->a_ops->get_xip_mem);
do {
unsigned long index;
unsigned long offset;
size_t copied;
void *xip_mem;
unsigned long xip_pfn;
offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */
index = pos >> PAGE_CACHE_SHIFT;
bytes = PAGE_CACHE_SIZE - offset;
if (bytes > count)
bytes = count;
status = a_ops->get_xip_mem(mapping, index, 0,
&xip_mem, &xip_pfn);
if (status == -ENODATA) {
/* we allocate a new page unmap it */
mutex_lock(&xip_sparse_mutex);
status = a_ops->get_xip_mem(mapping, index, 1,
&xip_mem, &xip_pfn);
mutex_unlock(&xip_sparse_mutex);
if (!status)
/* unmap page at pgoff from all other vmas */
__xip_unmap(mapping, index);
}
if (status)
break;
copied = bytes -
__copy_from_user_nocache(xip_mem + offset, buf, bytes);
if (likely(copied > 0)) {
status = copied;
if (status >= 0) {
written += status;
count -= status;
pos += status;
buf += status;
}
}
if (unlikely(copied != bytes))
if (status >= 0)
status = -EFAULT;
if (status < 0)
break;
} while (count);
*ppos = pos;
/*
* No need to use i_size_read() here, the i_size
* cannot change under us because we hold i_mutex.
*/
if (pos > inode->i_size) {
i_size_write(inode, pos);
mark_inode_dirty(inode);
}
return written ? written : status;
}
ssize_t
xip_file_write(struct file *filp, const char __user *buf, size_t len,
loff_t *ppos)
{
struct address_space *mapping = filp->f_mapping;
struct inode *inode = mapping->host;
size_t count;
loff_t pos;
ssize_t ret;
mutex_lock(&inode->i_mutex);
if (!access_ok(VERIFY_READ, buf, len)) {
ret=-EFAULT;
goto out_up;
}
pos = *ppos;
count = len;
vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
/* We can write back this queue in page reclaim */
current->backing_dev_info = mapping->backing_dev_info;
ret = generic_write_checks(filp, &pos, &count, S_ISBLK(inode->i_mode));
if (ret)
goto out_backing;
if (count == 0)
goto out_backing;
ret = file_remove_suid(filp);
if (ret)
goto out_backing;
file_update_time(filp);
ret = __xip_file_write (filp, buf, count, pos, ppos);
out_backing:
current->backing_dev_info = NULL;
out_up:
mutex_unlock(&inode->i_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(xip_file_write);
/*
* truncate a page used for execute in place
* functionality is analog to block_truncate_page but does use get_xip_mem
* to get the page instead of page cache
*/
int
xip_truncate_page(struct address_space *mapping, loff_t from)
{
pgoff_t index = from >> PAGE_CACHE_SHIFT;
unsigned offset = from & (PAGE_CACHE_SIZE-1);
unsigned blocksize;
unsigned length;
void *xip_mem;
unsigned long xip_pfn;
int err;
BUG_ON(!mapping->a_ops->get_xip_mem);
blocksize = 1 << mapping->host->i_blkbits;
length = offset & (blocksize - 1);
/* Block boundary? Nothing to do */
if (!length)
return 0;
length = blocksize - length;
err = mapping->a_ops->get_xip_mem(mapping, index, 0,
&xip_mem, &xip_pfn);
if (unlikely(err)) {
if (err == -ENODATA)
/* Hole? No need to truncate */
return 0;
else
return err;
}
memset(xip_mem + offset, 0, length);
return 0;
}
EXPORT_SYMBOL_GPL(xip_truncate_page);