kernel-ark/net/ipv4/tcp_input.c

6332 lines
180 KiB
C
Raw Normal View History

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Implementation of the Transmission Control Protocol(TCP).
*
* Authors: Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Mark Evans, <evansmp@uhura.aston.ac.uk>
* Corey Minyard <wf-rch!minyard@relay.EU.net>
* Florian La Roche, <flla@stud.uni-sb.de>
* Charles Hedrick, <hedrick@klinzhai.rutgers.edu>
* Linus Torvalds, <torvalds@cs.helsinki.fi>
* Alan Cox, <gw4pts@gw4pts.ampr.org>
* Matthew Dillon, <dillon@apollo.west.oic.com>
* Arnt Gulbrandsen, <agulbra@nvg.unit.no>
* Jorge Cwik, <jorge@laser.satlink.net>
*/
/*
* Changes:
* Pedro Roque : Fast Retransmit/Recovery.
* Two receive queues.
* Retransmit queue handled by TCP.
* Better retransmit timer handling.
* New congestion avoidance.
* Header prediction.
* Variable renaming.
*
* Eric : Fast Retransmit.
* Randy Scott : MSS option defines.
* Eric Schenk : Fixes to slow start algorithm.
* Eric Schenk : Yet another double ACK bug.
* Eric Schenk : Delayed ACK bug fixes.
* Eric Schenk : Floyd style fast retrans war avoidance.
* David S. Miller : Don't allow zero congestion window.
* Eric Schenk : Fix retransmitter so that it sends
* next packet on ack of previous packet.
* Andi Kleen : Moved open_request checking here
* and process RSTs for open_requests.
* Andi Kleen : Better prune_queue, and other fixes.
* Andrey Savochkin: Fix RTT measurements in the presence of
* timestamps.
* Andrey Savochkin: Check sequence numbers correctly when
* removing SACKs due to in sequence incoming
* data segments.
* Andi Kleen: Make sure we never ack data there is not
* enough room for. Also make this condition
* a fatal error if it might still happen.
* Andi Kleen: Add tcp_measure_rcv_mss to make
* connections with MSS<min(MTU,ann. MSS)
* work without delayed acks.
* Andi Kleen: Process packets with PSH set in the
* fast path.
* J Hadi Salim: ECN support
* Andrei Gurtov,
* Pasi Sarolahti,
* Panu Kuhlberg: Experimental audit of TCP (re)transmission
* engine. Lots of bugs are found.
* Pasi Sarolahti: F-RTO for dealing with spurious RTOs
*/
#define pr_fmt(fmt) "TCP: " fmt
#include <linux/mm.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/sysctl.h>
#include <linux/kernel.h>
#include <linux/prefetch.h>
#include <net/dst.h>
#include <net/tcp.h>
#include <net/inet_common.h>
#include <linux/ipsec.h>
#include <asm/unaligned.h>
#include <linux/errqueue.h>
int sysctl_tcp_timestamps __read_mostly = 1;
int sysctl_tcp_window_scaling __read_mostly = 1;
int sysctl_tcp_sack __read_mostly = 1;
int sysctl_tcp_fack __read_mostly = 1;
int sysctl_tcp_max_reordering __read_mostly = 300;
int sysctl_tcp_dsack __read_mostly = 1;
int sysctl_tcp_app_win __read_mostly = 31;
tcp: change tcp_adv_win_scale and tcp_rmem[2] tcp_adv_win_scale default value is 2, meaning we expect a good citizen skb to have skb->len / skb->truesize ratio of 75% (3/4) In 2.6 kernels we (mis)accounted for typical MSS=1460 frame : 1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392. So these skbs were considered as not bloated. With recent truesize fixes, a typical MSS=1460 frame truesize is now the more precise : 2048 + 256 = 2304. But 2304 * 3/4 = 1728. So these skb are not good citizen anymore, because 1460 < 1728 (GRO can escape this problem because it build skbs with a too low truesize.) This also means tcp advertises a too optimistic window for a given allocated rcvspace : When receiving frames, sk_rmem_alloc can hit sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often, especially when application is slow to drain its receive queue or in case of losses (netperf is fast, scp is slow). This is a major latency source. We should adjust the len/truesize ratio to 50% instead of 75% This patch : 1) changes tcp_adv_win_scale default to 1 instead of 2 2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account better truesize tracking and to allow autotuning tcp receive window to reach same value than before. Note that same amount of kernel memory is consumed compared to 2.6 kernels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 02:28:41 +00:00
int sysctl_tcp_adv_win_scale __read_mostly = 1;
EXPORT_SYMBOL(sysctl_tcp_adv_win_scale);
/* rfc5961 challenge ack rate limiting */
int sysctl_tcp_challenge_ack_limit = 100;
int sysctl_tcp_stdurg __read_mostly;
int sysctl_tcp_rfc1337 __read_mostly;
int sysctl_tcp_max_orphans __read_mostly = NR_FILE;
[TCP]: Enable SACK enhanced FRTO (RFC4138) by default Most of the description that follows comes from my mail to netdev (some editing done): Main obstacle to FRTO use is its deployment as it has to be on the sender side where as wireless link is often the receiver's access link. Take initiative on behalf of unlucky receivers and enable it by default in future Linux TCP senders. Also IETF seems to interested in advancing FRTO from experimental [1]. How does FRTO help? =================== FRTO detects spurious RTOs and avoids a number of unnecessary retransmissions and a couple of other problems that can arise due to incorrect guess made at RTO (i.e., that segments were lost when they actually got delayed which is likely to occur e.g. in wireless environments with link-layer retransmission). Though FRTO cannot prevent the first (potentially unnecessary) retransmission at RTO, I suspect that it won't cost that much even if you have to pay for each bit (won't be that high percentage out of all packets after all :-)). However, usually when you have a spurious RTO, not only the first segment unnecessarily retransmitted but the *whole window*. It goes like this: all cumulative ACKs got delayed due to in-order delivery, then TCP will actually send 1.5*original cwnd worth of data in the RTO's slow-start when the delayed ACKs arrive (basically the original cwnd worth of it unnecessarily). In case one is interested in minimizing unnecessary retransmissions e.g. due to cost, those rexmissions must never see daylight. Besides, in the worst case the generated burst overloads the bottleneck buffers which is likely to significantly delay the further progress of the flow. In case of ll rexmissions, ACK compression often occurs at the same time making the burst very "sharp edged" (in that case TCP often loses most of the segments above high_seq => very bad performance too). When FRTO is enabled, those unnecessary retransmissions are fully avoided except for the first segment and the cwnd behavior after detected spurious RTO is determined by the response (one can tune that by sysctl). Basic version (non-SACK enhanced one), FRTO can fail to detect spurious RTO as spurious and falls back to conservative behavior. ACK lossage is much less significant than reordering, usually the FRTO can detect spurious RTO if at least 2 cumulative ACKs from original window are preserved (excluding the ACK that advances to high_seq). With SACK-enhanced version, the detection is quite robust. FRTO should remove the need to set a high lower bound for the RTO estimator due to delay spikes that occur relatively common in some environments (esp. in wireless/cellular ones). [1] http://www1.ietf.org/mail-archive/web/tcpm/current/msg02862.html Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20 18:36:37 +00:00
int sysctl_tcp_frto __read_mostly = 2;
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
int sysctl_tcp_min_rtt_wlen __read_mostly = 300;
int sysctl_tcp_thin_dupack __read_mostly;
int sysctl_tcp_moderate_rcvbuf __read_mostly = 1;
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
int sysctl_tcp_early_retrans __read_mostly = 3;
tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks Helpers for mitigating ACK loops by rate-limiting dupacks sent in response to incoming out-of-window packets. This patch includes: - rate-limiting logic - sysctl to control how often we allow dupacks to out-of-window packets - SNMP counter for cases where we rate-limited our dupack sending The rate-limiting logic in this patch decides to not send dupacks in response to out-of-window segments if (a) they are SYNs or pure ACKs and (b) the remote endpoint is sending them faster than the configured rate limit. We rate-limit our responses rather than blocking them entirely or resetting the connection, because legitimate connections can rely on dupacks in response to some out-of-window segments. For example, zero window probes are typically sent with a sequence number that is below the current window, and ZWPs thus expect to thus elicit a dupack in response. We allow dupacks in response to TCP segments with data, because these may be spurious retransmissions for which the remote endpoint wants to receive DSACKs. This is safe because segments with data can't realistically be part of ACK loops, which by their nature consist of each side sending pure/data-less ACKs to each other. The dupack interval is controlled by a new sysctl knob, tcp_invalid_ratelimit, given in milliseconds, in case an administrator needs to dial this upward in the face of a high-rate DoS attack. The name and units are chosen to be analogous to the existing analogous knob for ICMP, icmp_ratelimit. The default value for tcp_invalid_ratelimit is 500ms, which allows at most one such dupack per 500ms. This is chosen to be 2x faster than the 1-second minimum RTO interval allowed by RFC 6298 (section 2, rule 2.4). We allow the extra 2x factor because network delay variations can cause packets sent at 1 second intervals to be compressed and arrive much closer. Reported-by: Avery Fay <avery@mixpanel.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06 21:04:38 +00:00
int sysctl_tcp_invalid_ratelimit __read_mostly = HZ/2;
#define FLAG_DATA 0x01 /* Incoming frame contained data. */
#define FLAG_WIN_UPDATE 0x02 /* Incoming ACK was a window update. */
#define FLAG_DATA_ACKED 0x04 /* This ACK acknowledged new data. */
#define FLAG_RETRANS_DATA_ACKED 0x08 /* "" "" some of which was retransmitted. */
#define FLAG_SYN_ACKED 0x10 /* This ACK acknowledged SYN. */
#define FLAG_DATA_SACKED 0x20 /* New SACK. */
#define FLAG_ECE 0x40 /* ECE in this ACK */
#define FLAG_LOST_RETRANS 0x80 /* This ACK marks some retransmission lost */
#define FLAG_SLOWPATH 0x100 /* Do not skip RFC checks for window update.*/
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
#define FLAG_ORIG_SACK_ACKED 0x200 /* Never retransmitted data are (s)acked */
#define FLAG_SND_UNA_ADVANCED 0x400 /* Snd_una was changed (!= FLAG_DATA_ACKED) */
#define FLAG_DSACKING_ACK 0x800 /* SACK blocks contained D-SACK info */
#define FLAG_SACK_RENEGING 0x2000 /* snd_una advanced to a sacked seq */
#define FLAG_UPDATE_TS_RECENT 0x4000 /* tcp_replace_ts_recent() */
#define FLAG_ACKED (FLAG_DATA_ACKED|FLAG_SYN_ACKED)
#define FLAG_NOT_DUP (FLAG_DATA|FLAG_WIN_UPDATE|FLAG_ACKED)
#define FLAG_CA_ALERT (FLAG_DATA_SACKED|FLAG_ECE)
#define FLAG_FORWARD_PROGRESS (FLAG_ACKED|FLAG_DATA_SACKED)
#define TCP_REMNANT (TCP_FLAG_FIN|TCP_FLAG_URG|TCP_FLAG_SYN|TCP_FLAG_PSH)
#define TCP_HP_BITS (~(TCP_RESERVED_BITS|TCP_FLAG_PSH))
#define REXMIT_NONE 0 /* no loss recovery to do */
#define REXMIT_LOST 1 /* retransmit packets marked lost */
#define REXMIT_NEW 2 /* FRTO-style transmit of unsent/new packets */
/* Adapt the MSS value used to make delayed ack decision to the
* real world.
*/
static void tcp_measure_rcv_mss(struct sock *sk, const struct sk_buff *skb)
{
struct inet_connection_sock *icsk = inet_csk(sk);
const unsigned int lss = icsk->icsk_ack.last_seg_size;
unsigned int len;
icsk->icsk_ack.last_seg_size = 0;
/* skb->len may jitter because of SACKs, even if peer
* sends good full-sized frames.
*/
len = skb_shinfo(skb)->gso_size ? : skb->len;
if (len >= icsk->icsk_ack.rcv_mss) {
icsk->icsk_ack.rcv_mss = len;
} else {
/* Otherwise, we make more careful check taking into account,
* that SACKs block is variable.
*
* "len" is invariant segment length, including TCP header.
*/
len += skb->data - skb_transport_header(skb);
if (len >= TCP_MSS_DEFAULT + sizeof(struct tcphdr) ||
/* If PSH is not set, packet should be
* full sized, provided peer TCP is not badly broken.
* This observation (if it is correct 8)) allows
* to handle super-low mtu links fairly.
*/
(len >= TCP_MIN_MSS + sizeof(struct tcphdr) &&
!(tcp_flag_word(tcp_hdr(skb)) & TCP_REMNANT))) {
/* Subtract also invariant (if peer is RFC compliant),
* tcp header plus fixed timestamp option length.
* Resulting "len" is MSS free of SACK jitter.
*/
len -= tcp_sk(sk)->tcp_header_len;
icsk->icsk_ack.last_seg_size = len;
if (len == lss) {
icsk->icsk_ack.rcv_mss = len;
return;
}
}
if (icsk->icsk_ack.pending & ICSK_ACK_PUSHED)
icsk->icsk_ack.pending |= ICSK_ACK_PUSHED2;
icsk->icsk_ack.pending |= ICSK_ACK_PUSHED;
}
}
static void tcp_incr_quickack(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
unsigned int quickacks = tcp_sk(sk)->rcv_wnd / (2 * icsk->icsk_ack.rcv_mss);
if (quickacks == 0)
quickacks = 2;
if (quickacks > icsk->icsk_ack.quick)
icsk->icsk_ack.quick = min(quickacks, TCP_MAX_QUICKACKS);
}
static void tcp_enter_quickack_mode(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
tcp_incr_quickack(sk);
icsk->icsk_ack.pingpong = 0;
icsk->icsk_ack.ato = TCP_ATO_MIN;
}
/* Send ACKs quickly, if "quick" count is not exhausted
* and the session is not interactive.
*/
tcp: v1 always send a quick ack when quickacks are enabled V1 of this patch contains Eric Dumazet's suggestion to move the per dst RTAX_QUICKACK check into tcp_in_quickack_mode(). Thanks Eric. I ran some tests and after setting the "ip route change quickack 1" knob there were still many delayed ACKs sent. This occured because when icsk_ack.quick=0 the !icsk_ack.pingpong value is subsequently ignored as tcp_in_quickack_mode() checks both these values. The condition for a quick ack to trigger requires that both icsk_ack.quick != 0 and icsk_ack.pingpong=0. Currently only icsk_ack.pingpong is controlled by the knob. But the icsk_ack.quick value changes dynamically depending on heuristics. The crux of the matter is that delayed acks still cannot be entirely disabled even with the RTAX_QUICKACK per dst knob enabled. This patch ensures that a quick ack is always sent when the RTAX_QUICKACK per dst knob is turned on. The "ip route change quickack 1" knob was recently added to enable quickacks. It was modeled around the TCP_QUICKACK setsockopt() option. This issue is that even with "ip route change quickack 1" enabled we still see delayed ACKs under some conditions. It would be nice to be able to completely disable delayed ACKs. Here is an example: # netstat -s|grep dela 3 delayed acks sent For all routes enable the knob # ip route change quickack 1 Generate some traffic across a slow link and we still see the delayed acks. # netstat -s|grep dela 106 delayed acks sent 1 delayed acks further delayed because of locked socket The issue is that both the "ip route change quickack 1" knob and the TCP_QUICKACK option set the icsk_ack.pingpong variable to 0. However at the business end in the __tcp_ack_snd_check() routine, tcp_in_quickack_mode() checks that both icsk_ack.quick != 0 and icsk_ack.pingpong=0 in order to trigger a quickack. As icsk_ack.quick is determined by heuristics it can be 0. When that occurs the icsk_ack.pingpong value is ignored and a delayed ACK is sent regardless. This patch moves the RTAX_QUICKACK per dst check into the tcp_in_quickack_mode() routine which ensures that a quickack is always sent when the quickack knob is enabled for that dst. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 00:12:28 +00:00
static bool tcp_in_quickack_mode(struct sock *sk)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
tcp: v1 always send a quick ack when quickacks are enabled V1 of this patch contains Eric Dumazet's suggestion to move the per dst RTAX_QUICKACK check into tcp_in_quickack_mode(). Thanks Eric. I ran some tests and after setting the "ip route change quickack 1" knob there were still many delayed ACKs sent. This occured because when icsk_ack.quick=0 the !icsk_ack.pingpong value is subsequently ignored as tcp_in_quickack_mode() checks both these values. The condition for a quick ack to trigger requires that both icsk_ack.quick != 0 and icsk_ack.pingpong=0. Currently only icsk_ack.pingpong is controlled by the knob. But the icsk_ack.quick value changes dynamically depending on heuristics. The crux of the matter is that delayed acks still cannot be entirely disabled even with the RTAX_QUICKACK per dst knob enabled. This patch ensures that a quick ack is always sent when the RTAX_QUICKACK per dst knob is turned on. The "ip route change quickack 1" knob was recently added to enable quickacks. It was modeled around the TCP_QUICKACK setsockopt() option. This issue is that even with "ip route change quickack 1" enabled we still see delayed ACKs under some conditions. It would be nice to be able to completely disable delayed ACKs. Here is an example: # netstat -s|grep dela 3 delayed acks sent For all routes enable the knob # ip route change quickack 1 Generate some traffic across a slow link and we still see the delayed acks. # netstat -s|grep dela 106 delayed acks sent 1 delayed acks further delayed because of locked socket The issue is that both the "ip route change quickack 1" knob and the TCP_QUICKACK option set the icsk_ack.pingpong variable to 0. However at the business end in the __tcp_ack_snd_check() routine, tcp_in_quickack_mode() checks that both icsk_ack.quick != 0 and icsk_ack.pingpong=0 in order to trigger a quickack. As icsk_ack.quick is determined by heuristics it can be 0. When that occurs the icsk_ack.pingpong value is ignored and a delayed ACK is sent regardless. This patch moves the RTAX_QUICKACK per dst check into the tcp_in_quickack_mode() routine which ensures that a quickack is always sent when the quickack knob is enabled for that dst. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 00:12:28 +00:00
const struct dst_entry *dst = __sk_dst_get(sk);
tcp: v1 always send a quick ack when quickacks are enabled V1 of this patch contains Eric Dumazet's suggestion to move the per dst RTAX_QUICKACK check into tcp_in_quickack_mode(). Thanks Eric. I ran some tests and after setting the "ip route change quickack 1" knob there were still many delayed ACKs sent. This occured because when icsk_ack.quick=0 the !icsk_ack.pingpong value is subsequently ignored as tcp_in_quickack_mode() checks both these values. The condition for a quick ack to trigger requires that both icsk_ack.quick != 0 and icsk_ack.pingpong=0. Currently only icsk_ack.pingpong is controlled by the knob. But the icsk_ack.quick value changes dynamically depending on heuristics. The crux of the matter is that delayed acks still cannot be entirely disabled even with the RTAX_QUICKACK per dst knob enabled. This patch ensures that a quick ack is always sent when the RTAX_QUICKACK per dst knob is turned on. The "ip route change quickack 1" knob was recently added to enable quickacks. It was modeled around the TCP_QUICKACK setsockopt() option. This issue is that even with "ip route change quickack 1" enabled we still see delayed ACKs under some conditions. It would be nice to be able to completely disable delayed ACKs. Here is an example: # netstat -s|grep dela 3 delayed acks sent For all routes enable the knob # ip route change quickack 1 Generate some traffic across a slow link and we still see the delayed acks. # netstat -s|grep dela 106 delayed acks sent 1 delayed acks further delayed because of locked socket The issue is that both the "ip route change quickack 1" knob and the TCP_QUICKACK option set the icsk_ack.pingpong variable to 0. However at the business end in the __tcp_ack_snd_check() routine, tcp_in_quickack_mode() checks that both icsk_ack.quick != 0 and icsk_ack.pingpong=0 in order to trigger a quickack. As icsk_ack.quick is determined by heuristics it can be 0. When that occurs the icsk_ack.pingpong value is ignored and a delayed ACK is sent regardless. This patch moves the RTAX_QUICKACK per dst check into the tcp_in_quickack_mode() routine which ensures that a quickack is always sent when the quickack knob is enabled for that dst. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 00:12:28 +00:00
return (dst && dst_metric(dst, RTAX_QUICKACK)) ||
(icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);
}
static void tcp_ecn_queue_cwr(struct tcp_sock *tp)
{
if (tp->ecn_flags & TCP_ECN_OK)
tp->ecn_flags |= TCP_ECN_QUEUE_CWR;
}
static void tcp_ecn_accept_cwr(struct tcp_sock *tp, const struct sk_buff *skb)
{
if (tcp_hdr(skb)->cwr)
tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR;
}
static void tcp_ecn_withdraw_cwr(struct tcp_sock *tp)
{
tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR;
}
static void __tcp_ecn_check_ce(struct tcp_sock *tp, const struct sk_buff *skb)
{
switch (TCP_SKB_CB(skb)->ip_dsfield & INET_ECN_MASK) {
case INET_ECN_NOT_ECT:
/* Funny extension: if ECT is not set on a segment,
* and we already seen ECT on a previous segment,
* it is probably a retransmit.
*/
if (tp->ecn_flags & TCP_ECN_SEEN)
tcp_enter_quickack_mode((struct sock *)tp);
break;
case INET_ECN_CE:
if (tcp_ca_needs_ecn((struct sock *)tp))
tcp_ca_event((struct sock *)tp, CA_EVENT_ECN_IS_CE);
if (!(tp->ecn_flags & TCP_ECN_DEMAND_CWR)) {
/* Better not delay acks, sender can have a very low cwnd */
tcp_enter_quickack_mode((struct sock *)tp);
tp->ecn_flags |= TCP_ECN_DEMAND_CWR;
}
tp->ecn_flags |= TCP_ECN_SEEN;
break;
default:
if (tcp_ca_needs_ecn((struct sock *)tp))
tcp_ca_event((struct sock *)tp, CA_EVENT_ECN_NO_CE);
tp->ecn_flags |= TCP_ECN_SEEN;
break;
}
}
static void tcp_ecn_check_ce(struct tcp_sock *tp, const struct sk_buff *skb)
{
if (tp->ecn_flags & TCP_ECN_OK)
__tcp_ecn_check_ce(tp, skb);
}
static void tcp_ecn_rcv_synack(struct tcp_sock *tp, const struct tcphdr *th)
{
if ((tp->ecn_flags & TCP_ECN_OK) && (!th->ece || th->cwr))
tp->ecn_flags &= ~TCP_ECN_OK;
}
static void tcp_ecn_rcv_syn(struct tcp_sock *tp, const struct tcphdr *th)
{
if ((tp->ecn_flags & TCP_ECN_OK) && (!th->ece || !th->cwr))
tp->ecn_flags &= ~TCP_ECN_OK;
}
static bool tcp_ecn_rcv_ecn_echo(const struct tcp_sock *tp, const struct tcphdr *th)
{
if (th->ece && !th->syn && (tp->ecn_flags & TCP_ECN_OK))
return true;
return false;
}
/* Buffer size and advertised window tuning.
*
* 1. Tuning sk->sk_sndbuf, when connection enters established state.
*/
static void tcp_sndbuf_expand(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
int sndmem, per_mss;
u32 nr_segs;
/* Worst case is non GSO/TSO : each frame consumes one skb
* and skb->head is kmalloced using power of two area of memory
*/
per_mss = max_t(u32, tp->rx_opt.mss_clamp, tp->mss_cache) +
MAX_TCP_HEADER +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
per_mss = roundup_pow_of_two(per_mss) +
SKB_DATA_ALIGN(sizeof(struct sk_buff));
nr_segs = max_t(u32, TCP_INIT_CWND, tp->snd_cwnd);
nr_segs = max_t(u32, nr_segs, tp->reordering + 1);
/* Fast Recovery (RFC 5681 3.2) :
* Cubic needs 1.7 factor, rounded to 2 to include
* extra cushion (application might react slowly to POLLOUT)
*/
sndmem = 2 * nr_segs * per_mss;
if (sk->sk_sndbuf < sndmem)
sk->sk_sndbuf = min(sndmem, sysctl_tcp_wmem[2]);
}
/* 2. Tuning advertised window (window_clamp, rcv_ssthresh)
*
* All tcp_full_space() is split to two parts: "network" buffer, allocated
* forward and advertised in receiver window (tp->rcv_wnd) and
* "application buffer", required to isolate scheduling/application
* latencies from network.
* window_clamp is maximal advertised window. It can be less than
* tcp_full_space(), in this case tcp_full_space() - window_clamp
* is reserved for "application" buffer. The less window_clamp is
* the smoother our behaviour from viewpoint of network, but the lower
* throughput and the higher sensitivity of the connection to losses. 8)
*
* rcv_ssthresh is more strict window_clamp used at "slow start"
* phase to predict further behaviour of this connection.
* It is used for two goals:
* - to enforce header prediction at sender, even when application
* requires some significant "application buffer". It is check #1.
* - to prevent pruning of receive queue because of misprediction
* of receiver window. Check #2.
*
* The scheme does not work when sender sends good segments opening
* window and then starts to feed us spaghetti. But it should work
* in common situations. Otherwise, we have to rely on queue collapsing.
*/
/* Slow part of check#2. */
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
static int __tcp_grow_window(const struct sock *sk, const struct sk_buff *skb)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
/* Optimize this! */
int truesize = tcp_win_from_space(skb->truesize) >> 1;
int window = tcp_win_from_space(sysctl_tcp_rmem[2]) >> 1;
while (tp->rcv_ssthresh <= window) {
if (truesize <= skb->len)
return 2 * inet_csk(sk)->icsk_ack.rcv_mss;
truesize >>= 1;
window >>= 1;
}
return 0;
}
static void tcp_grow_window(struct sock *sk, const struct sk_buff *skb)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
/* Check #1 */
if (tp->rcv_ssthresh < tp->window_clamp &&
(int)tp->rcv_ssthresh < tcp_space(sk) &&
!tcp_under_memory_pressure(sk)) {
int incr;
/* Check #2. Increase window, if skb with such overhead
* will fit to rcvbuf in future.
*/
if (tcp_win_from_space(skb->truesize) <= skb->len)
incr = 2 * tp->advmss;
else
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
incr = __tcp_grow_window(sk, skb);
if (incr) {
incr = max_t(int, incr, 2 * skb->len);
tp->rcv_ssthresh = min(tp->rcv_ssthresh + incr,
tp->window_clamp);
inet_csk(sk)->icsk_ack.quick |= 1;
}
}
}
/* 3. Tuning rcvbuf, when connection enters established state. */
static void tcp_fixup_rcvbuf(struct sock *sk)
{
u32 mss = tcp_sk(sk)->advmss;
int rcvmem;
rcvmem = 2 * SKB_TRUESIZE(mss + MAX_TCP_HEADER) *
tcp_default_init_rwnd(mss);
/* Dynamic Right Sizing (DRS) has 2 to 3 RTT latency
* Allow enough cushion so that sender is not limited by our window
*/
if (sysctl_tcp_moderate_rcvbuf)
rcvmem <<= 2;
if (sk->sk_rcvbuf < rcvmem)
sk->sk_rcvbuf = min(rcvmem, sysctl_tcp_rmem[2]);
}
/* 4. Try to fixup all. It is made immediately after connection enters
* established state.
*/
void tcp_init_buffer_space(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
int maxwin;
if (!(sk->sk_userlocks & SOCK_RCVBUF_LOCK))
tcp_fixup_rcvbuf(sk);
if (!(sk->sk_userlocks & SOCK_SNDBUF_LOCK))
tcp_sndbuf_expand(sk);
tp->rcvq_space.space = tp->rcv_wnd;
tp->rcvq_space.time = tcp_time_stamp;
tp->rcvq_space.seq = tp->copied_seq;
maxwin = tcp_full_space(sk);
if (tp->window_clamp >= maxwin) {
tp->window_clamp = maxwin;
if (sysctl_tcp_app_win && maxwin > 4 * tp->advmss)
tp->window_clamp = max(maxwin -
(maxwin >> sysctl_tcp_app_win),
4 * tp->advmss);
}
/* Force reservation of one segment. */
if (sysctl_tcp_app_win &&
tp->window_clamp > 2 * tp->advmss &&
tp->window_clamp + tp->advmss > maxwin)
tp->window_clamp = max(2 * tp->advmss, maxwin - tp->advmss);
tp->rcv_ssthresh = min(tp->rcv_ssthresh, tp->window_clamp);
tp->snd_cwnd_stamp = tcp_time_stamp;
}
/* 5. Recalculate window clamp after socket hit its memory bounds. */
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
static void tcp_clamp_window(struct sock *sk)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
icsk->icsk_ack.quick = 0;
if (sk->sk_rcvbuf < sysctl_tcp_rmem[2] &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK) &&
!tcp_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sk_prot_mem_limits(sk, 0)) {
sk->sk_rcvbuf = min(atomic_read(&sk->sk_rmem_alloc),
sysctl_tcp_rmem[2]);
}
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
tp->rcv_ssthresh = min(tp->window_clamp, 2U * tp->advmss);
}
/* Initialize RCV_MSS value.
* RCV_MSS is an our guess about MSS used by the peer.
* We haven't any direct information about the MSS.
* It's better to underestimate the RCV_MSS rather than overestimate.
* Overestimations make us ACKing less frequently than needed.
* Underestimations are more easy to detect and fix by tcp_measure_rcv_mss().
*/
void tcp_initialize_rcv_mss(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
unsigned int hint = min_t(unsigned int, tp->advmss, tp->mss_cache);
hint = min(hint, tp->rcv_wnd / 2);
hint = min(hint, TCP_MSS_DEFAULT);
hint = max(hint, TCP_MIN_MSS);
inet_csk(sk)->icsk_ack.rcv_mss = hint;
}
EXPORT_SYMBOL(tcp_initialize_rcv_mss);
/* Receiver "autotuning" code.
*
* The algorithm for RTT estimation w/o timestamps is based on
* Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.
* <http://public.lanl.gov/radiant/pubs.html#DRS>
*
* More detail on this code can be found at
* <http://staff.psc.edu/jheffner/>,
* though this reference is out of date. A new paper
* is pending.
*/
static void tcp_rcv_rtt_update(struct tcp_sock *tp, u32 sample, int win_dep)
{
u32 new_sample = tp->rcv_rtt_est.rtt;
long m = sample;
if (m == 0)
m = 1;
if (new_sample != 0) {
/* If we sample in larger samples in the non-timestamp
* case, we could grossly overestimate the RTT especially
* with chatty applications or bulk transfer apps which
* are stalled on filesystem I/O.
*
* Also, since we are only going for a minimum in the
* non-timestamp case, we do not smooth things out
* else with timestamps disabled convergence takes too
* long.
*/
if (!win_dep) {
m -= (new_sample >> 3);
new_sample += m;
} else {
m <<= 3;
if (m < new_sample)
new_sample = m;
}
} else {
/* No previous measure. */
new_sample = m << 3;
}
if (tp->rcv_rtt_est.rtt != new_sample)
tp->rcv_rtt_est.rtt = new_sample;
}
static inline void tcp_rcv_rtt_measure(struct tcp_sock *tp)
{
if (tp->rcv_rtt_est.time == 0)
goto new_measure;
if (before(tp->rcv_nxt, tp->rcv_rtt_est.seq))
return;
tcp_rcv_rtt_update(tp, tcp_time_stamp - tp->rcv_rtt_est.time, 1);
new_measure:
tp->rcv_rtt_est.seq = tp->rcv_nxt + tp->rcv_wnd;
tp->rcv_rtt_est.time = tcp_time_stamp;
}
static inline void tcp_rcv_rtt_measure_ts(struct sock *sk,
const struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
if (tp->rx_opt.rcv_tsecr &&
(TCP_SKB_CB(skb)->end_seq -
TCP_SKB_CB(skb)->seq >= inet_csk(sk)->icsk_ack.rcv_mss))
tcp_rcv_rtt_update(tp, tcp_time_stamp - tp->rx_opt.rcv_tsecr, 0);
}
/*
* This function should be called every time data is copied to user space.
* It calculates the appropriate TCP receive buffer space.
*/
void tcp_rcv_space_adjust(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
int time;
int copied;
time = tcp_time_stamp - tp->rcvq_space.time;
if (time < (tp->rcv_rtt_est.rtt >> 3) || tp->rcv_rtt_est.rtt == 0)
return;
/* Number of bytes copied to user in last RTT */
copied = tp->copied_seq - tp->rcvq_space.seq;
if (copied <= tp->rcvq_space.space)
goto new_measure;
/* A bit of theory :
* copied = bytes received in previous RTT, our base window
* To cope with packet losses, we need a 2x factor
* To cope with slow start, and sender growing its cwin by 100 %
* every RTT, we need a 4x factor, because the ACK we are sending
* now is for the next RTT, not the current one :
* <prev RTT . ><current RTT .. ><next RTT .... >
*/
if (sysctl_tcp_moderate_rcvbuf &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
int rcvwin, rcvmem, rcvbuf;
/* minimal window to cope with packet losses, assuming
* steady state. Add some cushion because of small variations.
*/
rcvwin = (copied << 1) + 16 * tp->advmss;
/* If rate increased by 25%,
* assume slow start, rcvwin = 3 * copied
* If rate increased by 50%,
* assume sender can use 2x growth, rcvwin = 4 * copied
*/
if (copied >=
tp->rcvq_space.space + (tp->rcvq_space.space >> 2)) {
if (copied >=
tp->rcvq_space.space + (tp->rcvq_space.space >> 1))
rcvwin <<= 1;
else
rcvwin += (rcvwin >> 1);
}
rcvmem = SKB_TRUESIZE(tp->advmss + MAX_TCP_HEADER);
while (tcp_win_from_space(rcvmem) < tp->advmss)
rcvmem += 128;
rcvbuf = min(rcvwin / tp->advmss * rcvmem, sysctl_tcp_rmem[2]);
if (rcvbuf > sk->sk_rcvbuf) {
sk->sk_rcvbuf = rcvbuf;
/* Make the window clamp follow along. */
tp->window_clamp = rcvwin;
}
}
tp->rcvq_space.space = copied;
new_measure:
tp->rcvq_space.seq = tp->copied_seq;
tp->rcvq_space.time = tcp_time_stamp;
}
/* There is something which you must keep in mind when you analyze the
* behavior of the tp->ato delayed ack timeout interval. When a
* connection starts up, we want to ack as quickly as possible. The
* problem is that "good" TCP's do slow start at the beginning of data
* transmission. The means that until we send the first few ACK's the
* sender will sit on his end and only queue most of his data, because
* he can only send snd_cwnd unacked packets at any given time. For
* each ACK we send, he increments snd_cwnd and transmits more of his
* queue. -DaveM
*/
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
static void tcp_event_data_recv(struct sock *sk, struct sk_buff *skb)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
u32 now;
inet_csk_schedule_ack(sk);
tcp_measure_rcv_mss(sk, skb);
tcp_rcv_rtt_measure(tp);
now = tcp_time_stamp;
if (!icsk->icsk_ack.ato) {
/* The _first_ data packet received, initialize
* delayed ACK engine.
*/
tcp_incr_quickack(sk);
icsk->icsk_ack.ato = TCP_ATO_MIN;
} else {
int m = now - icsk->icsk_ack.lrcvtime;
if (m <= TCP_ATO_MIN / 2) {
/* The fastest case is the first. */
icsk->icsk_ack.ato = (icsk->icsk_ack.ato >> 1) + TCP_ATO_MIN / 2;
} else if (m < icsk->icsk_ack.ato) {
icsk->icsk_ack.ato = (icsk->icsk_ack.ato >> 1) + m;
if (icsk->icsk_ack.ato > icsk->icsk_rto)
icsk->icsk_ack.ato = icsk->icsk_rto;
} else if (m > icsk->icsk_rto) {
/* Too long gap. Apparently sender failed to
* restart window, so that we send ACKs quickly.
*/
tcp_incr_quickack(sk);
[NET] CORE: Introducing new memory accounting interface. This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 08:11:19 +00:00
sk_mem_reclaim(sk);
}
}
icsk->icsk_ack.lrcvtime = now;
tcp_ecn_check_ce(tp, skb);
if (skb->len >= 128)
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_grow_window(sk, skb);
}
/* Called to compute a smoothed rtt estimate. The data fed to this
* routine either comes from timestamps, or from segments that were
* known _not_ to have been retransmitted [see Karn/Partridge
* Proceedings SIGCOMM 87]. The algorithm is from the SIGCOMM 88
* piece by Van Jacobson.
* NOTE: the next three routines used to be one big routine.
* To save cycles in the RFC 1323 implementation it was better to break
* it up into three procedures. -- erics
*/
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
static void tcp_rtt_estimator(struct sock *sk, long mrtt_us)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
long m = mrtt_us; /* RTT */
u32 srtt = tp->srtt_us;
/* The following amusing code comes from Jacobson's
* article in SIGCOMM '88. Note that rtt and mdev
* are scaled versions of rtt and mean deviation.
* This is designed to be as fast as possible
* m stands for "measurement".
*
* On a 1990 paper the rto value is changed to:
* RTO = rtt + 4 * mdev
*
* Funny. This algorithm seems to be very broken.
* These formulae increase RTO, when it should be decreased, increase
* too slowly, when it should be increased quickly, decrease too quickly
* etc. I guess in BSD RTO takes ONE value, so that it is absolutely
* does not matter how to _calculate_ it. Seems, it was trap
* that VJ failed to avoid. 8)
*/
2014-02-06 23:57:10 +00:00
if (srtt != 0) {
m -= (srtt >> 3); /* m is now error in rtt est */
srtt += m; /* rtt = 7/8 rtt + 1/8 new */
if (m < 0) {
m = -m; /* m is now abs(error) */
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
m -= (tp->mdev_us >> 2); /* similar update on mdev */
/* This is similar to one of Eifel findings.
* Eifel blocks mdev updates when rtt decreases.
* This solution is a bit different: we use finer gain
* for mdev in this case (alpha*beta).
* Like Eifel it also prevents growth of rto,
* but also it limits too fast rto decreases,
* happening in pure Eifel.
*/
if (m > 0)
m >>= 3;
} else {
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
m -= (tp->mdev_us >> 2); /* similar update on mdev */
}
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
tp->mdev_us += m; /* mdev = 3/4 mdev + 1/4 new */
if (tp->mdev_us > tp->mdev_max_us) {
tp->mdev_max_us = tp->mdev_us;
if (tp->mdev_max_us > tp->rttvar_us)
tp->rttvar_us = tp->mdev_max_us;
}
if (after(tp->snd_una, tp->rtt_seq)) {
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
if (tp->mdev_max_us < tp->rttvar_us)
tp->rttvar_us -= (tp->rttvar_us - tp->mdev_max_us) >> 2;
tp->rtt_seq = tp->snd_nxt;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
tp->mdev_max_us = tcp_rto_min_us(sk);
}
} else {
/* no previous measure. */
2014-02-06 23:57:10 +00:00
srtt = m << 3; /* take the measured time to be rtt */
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
tp->mdev_us = m << 1; /* make sure rto = 3*rtt */
tp->rttvar_us = max(tp->mdev_us, tcp_rto_min_us(sk));
tp->mdev_max_us = tp->rttvar_us;
tp->rtt_seq = tp->snd_nxt;
}
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
tp->srtt_us = max(1U, srtt);
}
tcp: TSO packets automatic sizing After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27 12:46:32 +00:00
/* Set the sk_pacing_rate to allow proper sizing of TSO packets.
* Note: TCP stack does not yet implement pacing.
* FQ packet scheduler can be used to implement cheap but effective
* TCP pacing, to smooth the burst on large writes when packets
* in flight is significantly lower than cwnd (or rwin)
*/
int sysctl_tcp_pacing_ss_ratio __read_mostly = 200;
int sysctl_tcp_pacing_ca_ratio __read_mostly = 120;
tcp: TSO packets automatic sizing After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27 12:46:32 +00:00
static void tcp_update_pacing_rate(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
u64 rate;
/* set sk_pacing_rate to 200 % of current rate (mss * cwnd / srtt) */
rate = (u64)tp->mss_cache * ((USEC_PER_SEC / 100) << 3);
/* current rate is (cwnd * mss) / srtt
* In Slow Start [1], set sk_pacing_rate to 200 % the current rate.
* In Congestion Avoidance phase, set it to 120 % the current rate.
*
* [1] : Normal Slow Start condition is (tp->snd_cwnd < tp->snd_ssthresh)
* If snd_cwnd >= (tp->snd_ssthresh / 2), we are approaching
* end of slow start and should slow down.
*/
if (tp->snd_cwnd < tp->snd_ssthresh / 2)
rate *= sysctl_tcp_pacing_ss_ratio;
else
rate *= sysctl_tcp_pacing_ca_ratio;
tcp: TSO packets automatic sizing After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27 12:46:32 +00:00
rate *= max(tp->snd_cwnd, tp->packets_out);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
if (likely(tp->srtt_us))
do_div(rate, tp->srtt_us);
tcp: TSO packets automatic sizing After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27 12:46:32 +00:00
/* ACCESS_ONCE() is needed because sch_fq fetches sk_pacing_rate
* without any lock. We want to make sure compiler wont store
* intermediate values in this location.
*/
ACCESS_ONCE(sk->sk_pacing_rate) = min_t(u64, rate,
sk->sk_max_pacing_rate);
tcp: TSO packets automatic sizing After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27 12:46:32 +00:00
}
/* Calculate rto without backoff. This is the second half of Van Jacobson's
* routine referred to above.
*/
static void tcp_set_rto(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
/* Old crap is replaced with new one. 8)
*
* More seriously:
* 1. If rtt variance happened to be less 50msec, it is hallucination.
* It cannot be less due to utterly erratic ACK generation made
* at least by solaris and freebsd. "Erratic ACKs" has _nothing_
* to do with delayed acks, because at cwnd>2 true delack timeout
* is invisible. Actually, Linux-2.4 also generates erratic
* ACKs in some circumstances.
*/
inet_csk(sk)->icsk_rto = __tcp_set_rto(tp);
/* 2. Fixups made earlier cannot be right.
* If we do not estimate RTO correctly without them,
* all the algo is pure shit and should be replaced
* with correct one. It is exactly, which we pretend to do.
*/
/* NOTE: clamping at TCP_RTO_MIN is not required, current algo
* guarantees that rto is higher.
*/
tcp_bound_rto(sk);
}
__u32 tcp_init_cwnd(const struct tcp_sock *tp, const struct dst_entry *dst)
{
__u32 cwnd = (dst ? dst_metric(dst, RTAX_INITCWND) : 0);
if (!cwnd)
cwnd = TCP_INIT_CWND;
return min_t(__u32, cwnd, tp->snd_cwnd_clamp);
}
/*
* Packet counting of FACK is based on in-order assumptions, therefore TCP
* disables it when reordering is detected
*/
void tcp_disable_fack(struct tcp_sock *tp)
{
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
/* RFC3517 uses different metric in lost marker => reset on change */
if (tcp_is_fack(tp))
tp->lost_skb_hint = NULL;
tp->rx_opt.sack_ok &= ~TCP_FACK_ENABLED;
}
/* Take a notice that peer is sending D-SACKs */
static void tcp_dsack_seen(struct tcp_sock *tp)
{
tp->rx_opt.sack_ok |= TCP_DSACK_SEEN;
}
static void tcp_update_reordering(struct sock *sk, const int metric,
const int ts)
{
struct tcp_sock *tp = tcp_sk(sk);
if (metric > tp->reordering) {
int mib_idx;
tp->reordering = min(sysctl_tcp_max_reordering, metric);
/* This exciting event is worth to be remembered. 8) */
if (ts)
mib_idx = LINUX_MIB_TCPTSREORDER;
else if (tcp_is_reno(tp))
mib_idx = LINUX_MIB_TCPRENOREORDER;
else if (tcp_is_fack(tp))
mib_idx = LINUX_MIB_TCPFACKREORDER;
else
mib_idx = LINUX_MIB_TCPSACKREORDER;
NET_INC_STATS(sock_net(sk), mib_idx);
#if FASTRETRANS_DEBUG > 1
pr_debug("Disorder%d %d %u f%u s%u rr%d\n",
tp->rx_opt.sack_ok, inet_csk(sk)->icsk_ca_state,
tp->reordering,
tp->fackets_out,
tp->sacked_out,
tp->undo_marker ? tp->undo_retrans : 0);
#endif
tcp_disable_fack(tp);
}
tcp: early retransmit This patch implements RFC 5827 early retransmit (ER) for TCP. It reduces DUPACK threshold (dupthresh) if outstanding packets are less than 4 to recover losses by fast recovery instead of timeout. While the algorithm is simple, small but frequent network reordering makes this feature dangerous: the connection repeatedly enter false recovery and degrade performance. Therefore we implement a mitigation suggested in the appendix of the RFC that delays entering fast recovery by a small interval, i.e., RTT/4. Currently ER is conservative and is disabled for the rest of the connection after the first reordering event. A large scale web server experiment on the performance impact of ER is summarized in section 6 of the paper "Proportional Rate Reduction for TCP”, IMC 2011. http://conferences.sigcomm.org/imc/2011/docs/p155.pdf Note that Linux has a similar feature called THIN_DUPACK. The differences are THIN_DUPACK do not mitigate reorderings and is only used after slow start. Currently ER is disabled if THIN_DUPACK is enabled. I would be happy to merge THIN_DUPACK feature with ER if people think it's a good idea. ER is enabled by sysctl_tcp_early_retrans: 0: Disables ER 1: Reduce dupthresh to packets_out - 1 when outstanding packets < 4. 2: (Default) reduce dupthresh like mode 1. In addition, delay entering fast recovery by RTT/4. Note: mode 2 is implemented in the third part of this patch series. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 13:30:03 +00:00
if (metric > 0)
tcp_disable_early_retrans(tp);
tp->rack.reord = 1;
}
/* This must be called before lost_out is incremented */
static void tcp_verify_retransmit_hint(struct tcp_sock *tp, struct sk_buff *skb)
{
if (!tp->retransmit_skb_hint ||
before(TCP_SKB_CB(skb)->seq,
TCP_SKB_CB(tp->retransmit_skb_hint)->seq))
tp->retransmit_skb_hint = skb;
if (!tp->lost_out ||
after(TCP_SKB_CB(skb)->end_seq, tp->retransmit_high))
tp->retransmit_high = TCP_SKB_CB(skb)->end_seq;
}
static void tcp_skb_mark_lost(struct tcp_sock *tp, struct sk_buff *skb)
{
if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_LOST|TCPCB_SACKED_ACKED))) {
tcp_verify_retransmit_hint(tp, skb);
tp->lost_out += tcp_skb_pcount(skb);
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
}
}
void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb)
{
tcp_verify_retransmit_hint(tp, skb);
if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_LOST|TCPCB_SACKED_ACKED))) {
tp->lost_out += tcp_skb_pcount(skb);
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
}
}
/* This procedure tags the retransmission queue when SACKs arrive.
*
* We have three tag bits: SACKED(S), RETRANS(R) and LOST(L).
* Packets in queue with these bits set are counted in variables
* sacked_out, retrans_out and lost_out, correspondingly.
*
* Valid combinations are:
* Tag InFlight Description
* 0 1 - orig segment is in flight.
* S 0 - nothing flies, orig reached receiver.
* L 0 - nothing flies, orig lost by net.
* R 2 - both orig and retransmit are in flight.
* L|R 1 - orig is lost, retransmit is in flight.
* S|R 1 - orig reached receiver, retrans is still in flight.
* (L|S|R is logically valid, it could occur when L|R is sacked,
* but it is equivalent to plain S and code short-curcuits it to S.
* L|S is logically invalid, it would mean -1 packet in flight 8))
*
* These 6 states form finite state machine, controlled by the following events:
* 1. New ACK (+SACK) arrives. (tcp_sacktag_write_queue())
* 2. Retransmission. (tcp_retransmit_skb(), tcp_xmit_retransmit_queue())
* 3. Loss detection event of two flavors:
* A. Scoreboard estimator decided the packet is lost.
* A'. Reno "three dupacks" marks head of queue lost.
* A''. Its FACK modification, head until snd.fack is lost.
* B. SACK arrives sacking SND.NXT at the moment, when the
* segment was retransmitted.
* 4. D-SACK added new rule: D-SACK changes any tag to S.
*
* It is pleasant to note, that state diagram turns out to be commutative,
* so that we are allowed not to be bothered by order of our actions,
* when multiple events arrive simultaneously. (see the function below).
*
* Reordering detection.
* --------------------
* Reordering metric is maximal distance, which a packet can be displaced
* in packet stream. With SACKs we can estimate it:
*
* 1. SACK fills old hole and the corresponding segment was not
* ever retransmitted -> reordering. Alas, we cannot use it
* when segment was retransmitted.
* 2. The last flaw is solved with D-SACK. D-SACK arrives
* for retransmitted and already SACKed segment -> reordering..
* Both of these heuristics are not used in Loss state, when we cannot
* account for retransmits accurately.
*
* SACK block validation.
* ----------------------
*
* SACK block range validation checks that the received SACK block fits to
* the expected sequence limits, i.e., it is between SND.UNA and SND.NXT.
* Note that SND.UNA is not included to the range though being valid because
* it means that the receiver is rather inconsistent with itself reporting
* SACK reneging when it should advance SND.UNA. Such SACK block this is
* perfectly valid, however, in light of RFC2018 which explicitly states
* that "SACK block MUST reflect the newest segment. Even if the newest
* segment is going to be discarded ...", not that it looks very clever
* in case of head skb. Due to potentional receiver driven attacks, we
* choose to avoid immediate execution of a walk in write queue due to
* reneging and defer head skb's loss recovery to standard loss recovery
* procedure that will eventually trigger (nothing forbids us doing this).
*
* Implements also blockage to start_seq wrap-around. Problem lies in the
* fact that though start_seq (s) is before end_seq (i.e., not reversed),
* there's no guarantee that it will be before snd_nxt (n). The problem
* happens when start_seq resides between end_seq wrap (e_w) and snd_nxt
* wrap (s_w):
*
* <- outs wnd -> <- wrapzone ->
* u e n u_w e_w s n_w
* | | | | | | |
* |<------------+------+----- TCP seqno space --------------+---------->|
* ...-- <2^31 ->| |<--------...
* ...---- >2^31 ------>| |<--------...
*
* Current code wouldn't be vulnerable but it's better still to discard such
* crazy SACK blocks. Doing this check for start_seq alone closes somewhat
* similar case (end_seq after snd_nxt wrap) as earlier reversed check in
* snd_nxt wrap -> snd_una region will then become "well defined", i.e.,
* equal to the ideal case (infinite seqno space without wrap caused issues).
*
* With D-SACK the lower bound is extended to cover sequence space below
* SND.UNA down to undo_marker, which is the last point of interest. Yet
* again, D-SACK block must not to go across snd_una (for the same reason as
* for the normal SACK blocks, explained above). But there all simplicity
* ends, TCP might receive valid D-SACKs below that. As long as they reside
* fully below undo_marker they do not affect behavior in anyway and can
* therefore be safely ignored. In rare cases (which are more or less
* theoretical ones), the D-SACK will nicely cross that boundary due to skb
* fragmentation and packet reordering past skb's retransmission. To consider
* them correctly, the acceptable range must be extended even more though
* the exact amount is rather hard to quantify. However, tp->max_window can
* be used as an exaggerated estimate.
*/
static bool tcp_is_sackblock_valid(struct tcp_sock *tp, bool is_dsack,
u32 start_seq, u32 end_seq)
{
/* Too far in future, or reversed (interpretation is ambiguous) */
if (after(end_seq, tp->snd_nxt) || !before(start_seq, end_seq))
return false;
/* Nasty start_seq wrap-around check (see comments above) */
if (!before(start_seq, tp->snd_nxt))
return false;
/* In outstanding window? ...This is valid exit for D-SACKs too.
* start_seq == snd_una is non-sensical (see comments above)
*/
if (after(start_seq, tp->snd_una))
return true;
if (!is_dsack || !tp->undo_marker)
return false;
/* ...Then it's D-SACK, and must reside below snd_una completely */
if (after(end_seq, tp->snd_una))
return false;
if (!before(start_seq, tp->undo_marker))
return true;
/* Too old */
if (!after(end_seq, tp->undo_marker))
return false;
/* Undo_marker boundary crossing (overestimates a lot). Known already:
* start_seq < undo_marker and end_seq >= undo_marker.
*/
return !before(start_seq, end_seq - tp->max_window);
}
static bool tcp_check_dsack(struct sock *sk, const struct sk_buff *ack_skb,
struct tcp_sack_block_wire *sp, int num_sacks,
u32 prior_snd_una)
{
struct tcp_sock *tp = tcp_sk(sk);
u32 start_seq_0 = get_unaligned_be32(&sp[0].start_seq);
u32 end_seq_0 = get_unaligned_be32(&sp[0].end_seq);
bool dup_sack = false;
if (before(start_seq_0, TCP_SKB_CB(ack_skb)->ack_seq)) {
dup_sack = true;
tcp_dsack_seen(tp);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPDSACKRECV);
} else if (num_sacks > 1) {
u32 end_seq_1 = get_unaligned_be32(&sp[1].end_seq);
u32 start_seq_1 = get_unaligned_be32(&sp[1].start_seq);
if (!after(end_seq_0, end_seq_1) &&
!before(start_seq_0, start_seq_1)) {
dup_sack = true;
tcp_dsack_seen(tp);
NET_INC_STATS(sock_net(sk),
LINUX_MIB_TCPDSACKOFORECV);
}
}
/* D-SACK for already forgotten data... Do dumb counting. */
if (dup_sack && tp->undo_marker && tp->undo_retrans > 0 &&
!after(end_seq_0, prior_snd_una) &&
after(end_seq_0, tp->undo_marker))
tp->undo_retrans--;
return dup_sack;
}
struct tcp_sacktag_state {
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
int reord;
int fack_count;
/* Timestamps for earliest and latest never-retransmitted segment
* that was SACKed. RTO needs the earliest RTT to stay conservative,
* but congestion control should still get an accurate delay signal.
*/
struct skb_mstamp first_sackt;
struct skb_mstamp last_sackt;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
int flag;
};
/* Check if skb is fully within the SACK block. In presence of GSO skbs,
* the incoming SACK may not exactly match but we can find smaller MSS
* aligned portion of it that matches. Therefore we might need to fragment
* which may fail and creates some hassle (caller must handle error case
* returns).
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
*
* FIXME: this could be merged to shift decision code
*/
static int tcp_match_skb_to_sack(struct sock *sk, struct sk_buff *skb,
u32 start_seq, u32 end_seq)
{
int err;
bool in_sack;
unsigned int pkt_len;
unsigned int mss;
in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq) &&
!before(end_seq, TCP_SKB_CB(skb)->end_seq);
if (tcp_skb_pcount(skb) > 1 && !in_sack &&
after(TCP_SKB_CB(skb)->end_seq, start_seq)) {
mss = tcp_skb_mss(skb);
in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq);
if (!in_sack) {
pkt_len = start_seq - TCP_SKB_CB(skb)->seq;
if (pkt_len < mss)
pkt_len = mss;
} else {
pkt_len = end_seq - TCP_SKB_CB(skb)->seq;
if (pkt_len < mss)
return -EINVAL;
}
/* Round if necessary so that SACKs cover only full MSSes
* and/or the remaining small portion (if present)
*/
if (pkt_len > mss) {
unsigned int new_len = (pkt_len / mss) * mss;
if (!in_sack && new_len < pkt_len) {
new_len += mss;
tcp: fix tcp_match_skb_to_sack() for unaligned SACK at end of an skb If there is an MSS change (or misbehaving receiver) that causes a SACK to arrive that covers the end of an skb but is less than one MSS, then tcp_match_skb_to_sack() was rounding up pkt_len to the full length of the skb ("Round if necessary..."), then chopping all bytes off the skb and creating a zero-byte skb in the write queue. This was visible now because the recently simplified TLP logic in bef1909ee3ed1c ("tcp: fixing TLP's FIN recovery") could find that 0-byte skb at the end of the write queue, and now that we do not check that skb's length we could send it as a TLP probe. Consider the following example scenario: mss: 1000 skb: seq: 0 end_seq: 4000 len: 4000 SACK: start_seq: 3999 end_seq: 4000 The tcp_match_skb_to_sack() code will compute: in_sack = false pkt_len = start_seq - TCP_SKB_CB(skb)->seq = 3999 - 0 = 3999 new_len = (pkt_len / mss) * mss = (3999/1000)*1000 = 3000 new_len += mss = 4000 Previously we would find the new_len > skb->len check failing, so we would fall through and set pkt_len = new_len = 4000 and chop off pkt_len of 4000 from the 4000-byte skb, leaving a 0-byte segment afterward in the write queue. With this new commit, we notice that the new new_len >= skb->len check succeeds, so that we return without trying to fragment. Fixes: adb92db857ee ("tcp: Make SACK code to split only at mss boundaries") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-19 01:15:03 +00:00
if (new_len >= skb->len)
return 0;
}
pkt_len = new_len;
}
err = tcp_fragment(sk, skb, pkt_len, mss, GFP_ATOMIC);
if (err < 0)
return err;
}
return in_sack;
}
/* Mark the given newly-SACKed range as such, adjusting counters and hints. */
static u8 tcp_sacktag_one(struct sock *sk,
struct tcp_sacktag_state *state, u8 sacked,
u32 start_seq, u32 end_seq,
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
int dup_sack, int pcount,
const struct skb_mstamp *xmit_time)
{
struct tcp_sock *tp = tcp_sk(sk);
int fack_count = state->fack_count;
/* Account D-SACK for retransmitted packet. */
if (dup_sack && (sacked & TCPCB_RETRANS)) {
if (tp->undo_marker && tp->undo_retrans > 0 &&
after(end_seq, tp->undo_marker))
tp->undo_retrans--;
if (sacked & TCPCB_SACKED_ACKED)
state->reord = min(fack_count, state->reord);
}
/* Nothing to do; acked frame is about to be dropped (was ACKed). */
if (!after(end_seq, tp->snd_una))
return sacked;
if (!(sacked & TCPCB_SACKED_ACKED)) {
tcp: track the packet timings in RACK This patch is the first half of the RACK loss recovery. RACK loss recovery uses the notion of time instead of packet sequence (FACK) or counts (dupthresh). It's inspired by the previous FACK heuristic in tcp_mark_lost_retrans(): when a limited transmit (new data packet) is sacked, then current retransmitted sequence below the newly sacked sequence must been lost, since at least one round trip time has elapsed. But it has several limitations: 1) can't detect tail drops since it depends on limited transmit 2) is disabled upon reordering (assumes no reordering) 3) only enabled in fast recovery ut not timeout recovery RACK (Recently ACK) addresses these limitations with the notion of time instead: a packet P1 is lost if a later packet P2 is s/acked, as at least one round trip has passed. Since RACK cares about the time sequence instead of the data sequence of packets, it can detect tail drops when later retransmission is s/acked while FACK or dupthresh can't. For reordering RACK uses a dynamically adjusted reordering window ("reo_wnd") to reduce false positives on ever (small) degree of reordering. This patch implements tcp_advanced_rack() which tracks the most recent transmission time among the packets that have been delivered (ACKed or SACKed) in tp->rack.mstamp. This timestamp is the key to determine which packet has been lost. Consider an example that the sender sends six packets: T1: P1 (lost) T2: P2 T3: P3 T4: P4 T100: sack of P2. rack.mstamp = T2 T101: retransmit P1 T102: sack of P2,P3,P4. rack.mstamp = T4 T205: ACK of P4 since the hole is repaired. rack.mstamp = T101 We need to be careful about spurious retransmission because it may falsely advance tp->rack.mstamp by an RTT or an RTO, causing RACK to falsely mark all packets lost, just like a spurious timeout. We identify spurious retransmission by the ACK's TS echo value. If TS option is not applicable but the retransmission is acknowledged less than min-RTT ago, it is likely to be spurious. We refrain from using the transmission time of these spurious retransmissions. The second half is implemented in the next patch that marks packet lost using RACK timestamp. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:46 +00:00
tcp_rack_advance(tp, xmit_time, sacked);
if (sacked & TCPCB_SACKED_RETRANS) {
/* If the segment is not tagged as lost,
* we do not clear RETRANS, believing
* that retransmission is still in flight.
*/
if (sacked & TCPCB_LOST) {
sacked &= ~(TCPCB_LOST|TCPCB_SACKED_RETRANS);
tp->lost_out -= pcount;
tp->retrans_out -= pcount;
}
} else {
if (!(sacked & TCPCB_RETRANS)) {
/* New sack for not retransmitted frame,
* which was in hole. It is reordering.
*/
if (before(start_seq,
tcp_highest_sack_seq(tp)))
state->reord = min(fack_count,
state->reord);
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (!after(end_seq, tp->high_seq))
state->flag |= FLAG_ORIG_SACK_ACKED;
if (state->first_sackt.v64 == 0)
state->first_sackt = *xmit_time;
state->last_sackt = *xmit_time;
}
if (sacked & TCPCB_LOST) {
sacked &= ~TCPCB_LOST;
tp->lost_out -= pcount;
}
}
sacked |= TCPCB_SACKED_ACKED;
state->flag |= FLAG_DATA_SACKED;
tp->sacked_out += pcount;
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
tp->delivered += pcount; /* Out-of-order packets delivered */
fack_count += pcount;
/* Lost marker hint past SACKed? Tweak RFC3517 cnt */
if (!tcp_is_fack(tp) && tp->lost_skb_hint &&
before(start_seq, TCP_SKB_CB(tp->lost_skb_hint)->seq))
tp->lost_cnt_hint += pcount;
if (fack_count > tp->fackets_out)
tp->fackets_out = fack_count;
}
/* D-SACK. We can detect redundant retransmission in S|R and plain R
* frames and clear it. undo_retrans is decreased above, L|R frames
* are accounted above as well.
*/
if (dup_sack && (sacked & TCPCB_SACKED_RETRANS)) {
sacked &= ~TCPCB_SACKED_RETRANS;
tp->retrans_out -= pcount;
}
return sacked;
}
/* Shift newly-SACKed bytes from this skb to the immediately previous
* already-SACKed sk_buff. Mark the newly-SACKed bytes as such.
*/
static bool tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
unsigned int pcount, int shifted, int mss,
bool dup_sack)
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
u32 start_seq = TCP_SKB_CB(skb)->seq; /* start of newly-SACKed */
u32 end_seq = start_seq + shifted; /* end of newly-SACKed */
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
BUG_ON(!pcount);
/* Adjust counters and hints for the newly sacked sequence
* range but discard the return value since prev is already
* marked. We must tag the range first because the seq
* advancement below implicitly advances
* tcp_highest_sack_seq() when skb is highest_sack.
*/
tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
start_seq, end_seq, dup_sack, pcount,
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
&skb->skb_mstamp);
if (skb == tp->lost_skb_hint)
tp->lost_cnt_hint += pcount;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
TCP_SKB_CB(prev)->end_seq += shifted;
TCP_SKB_CB(skb)->seq += shifted;
tcp_skb_pcount_add(prev, pcount);
BUG_ON(tcp_skb_pcount(skb) < pcount);
tcp_skb_pcount_add(skb, -pcount);
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
/* When we're adding to gso_segs == 1, gso_size will be zero,
* in theory this shouldn't be necessary but as long as DSACK
* code can come after this skb later on it's better to keep
* setting gso_size to something.
*/
if (!TCP_SKB_CB(prev)->tcp_gso_size)
TCP_SKB_CB(prev)->tcp_gso_size = mss;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
/* CHECKME: To clear or not to clear? Mimics normal skb currently */
if (tcp_skb_pcount(skb) <= 1)
TCP_SKB_CB(skb)->tcp_gso_size = 0;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
if (skb->len > 0) {
BUG_ON(!tcp_skb_pcount(skb));
NET_INC_STATS(sock_net(sk), LINUX_MIB_SACKSHIFTED);
return false;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
}
/* Whole SKB was eaten :-) */
if (skb == tp->retransmit_skb_hint)
tp->retransmit_skb_hint = prev;
if (skb == tp->lost_skb_hint) {
tp->lost_skb_hint = prev;
tp->lost_cnt_hint -= tcp_skb_pcount(prev);
}
tcp: do not forget FIN in tcp_shifted_skb() Yuchung found following problem : There are bugs in the SACK processing code, merging part in tcp_shift_skb_data(), that incorrectly resets or ignores the sacked skbs FIN flag. When a receiver first SACK the FIN sequence, and later throw away ofo queue (e.g., sack-reneging), the sender will stop retransmitting the FIN flag, and hangs forever. Following packetdrill test can be used to reproduce the bug. $ cat sack-merge-bug.pkt `sysctl -q net.ipv4.tcp_fack=0` // Establish a connection and send 10 MSS. 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +.000 bind(3, ..., ...) = 0 +.000 listen(3, 1) = 0 +.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.001 < . 1:1(0) ack 1 win 1024 +.000 accept(3, ..., ...) = 4 +.100 write(4, ..., 12000) = 12000 +.000 shutdown(4, SHUT_WR) = 0 +.000 > . 1:10001(10000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 +.000 > FP. 10001:12001(2000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop> +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop> // SACK reneg +.050 < . 1:1(0) ack 12001 win 257 +0 %{ print "unacked: ",tcpi_unacked }% +5 %{ print "" }% First, a typo inverted left/right of one OR operation, then code forgot to advance end_seq if the merged skb carried FIN. Bug was added in 2.6.29 by commit 832d11c5cd076ab ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-04 17:31:41 +00:00
TCP_SKB_CB(prev)->tcp_flags |= TCP_SKB_CB(skb)->tcp_flags;
tcp: Handle eor bit when coalescing skb This patch: 1. Prevent next_skb from coalescing to the prev_skb if TCP_SKB_CB(prev_skb)->eor is set 2. Update the TCP_SKB_CB(prev_skb)->eor if coalescing is allowed Packetdrill script for testing: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 write(4, ..., 11680) = 11680 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:13141,nop,nop> 0.300 > P. 1:731(730) ack 1 0.300 > P. 731:1461(730) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25 21:44:49 +00:00
TCP_SKB_CB(prev)->eor = TCP_SKB_CB(skb)->eor;
tcp: do not forget FIN in tcp_shifted_skb() Yuchung found following problem : There are bugs in the SACK processing code, merging part in tcp_shift_skb_data(), that incorrectly resets or ignores the sacked skbs FIN flag. When a receiver first SACK the FIN sequence, and later throw away ofo queue (e.g., sack-reneging), the sender will stop retransmitting the FIN flag, and hangs forever. Following packetdrill test can be used to reproduce the bug. $ cat sack-merge-bug.pkt `sysctl -q net.ipv4.tcp_fack=0` // Establish a connection and send 10 MSS. 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +.000 bind(3, ..., ...) = 0 +.000 listen(3, 1) = 0 +.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.001 < . 1:1(0) ack 1 win 1024 +.000 accept(3, ..., ...) = 4 +.100 write(4, ..., 12000) = 12000 +.000 shutdown(4, SHUT_WR) = 0 +.000 > . 1:10001(10000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 +.000 > FP. 10001:12001(2000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop> +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop> // SACK reneg +.050 < . 1:1(0) ack 12001 win 257 +0 %{ print "unacked: ",tcpi_unacked }% +5 %{ print "" }% First, a typo inverted left/right of one OR operation, then code forgot to advance end_seq if the merged skb carried FIN. Bug was added in 2.6.29 by commit 832d11c5cd076ab ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-04 17:31:41 +00:00
if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
TCP_SKB_CB(prev)->end_seq++;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
if (skb == tcp_highest_sack(sk))
tcp_advance_highest_sack(sk, skb);
tcp: Merge tx_flags and tskey in tcp_shifted_skb After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 05:39:29 +00:00
tcp_skb_collapse_tstamp(prev, skb);
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
tcp_unlink_write_queue(skb, sk);
sk_wmem_free_skb(sk, skb);
NET_INC_STATS(sock_net(sk), LINUX_MIB_SACKMERGED);
return true;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
}
/* I wish gso_size would have a bit more sane initialization than
* something-or-zero which complicates things
*/
static int tcp_skb_seglen(const struct sk_buff *skb)
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
{
return tcp_skb_pcount(skb) == 1 ? skb->len : tcp_skb_mss(skb);
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
}
/* Shifting pages past head area doesn't work */
static int skb_can_shift(const struct sk_buff *skb)
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
{
return !skb_headlen(skb) && skb_is_nonlinear(skb);
}
/* Try collapsing SACK blocks spanning across multiple skbs to a single
* skb.
*/
static struct sk_buff *tcp_shift_skb_data(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
u32 start_seq, u32 end_seq,
bool dup_sack)
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev;
int mss;
int pcount = 0;
int len;
int in_sack;
if (!sk_can_gso(sk))
goto fallback;
/* Normally R but no L won't result in plain S */
if (!dup_sack &&
(TCP_SKB_CB(skb)->sacked & (TCPCB_LOST|TCPCB_SACKED_RETRANS)) == TCPCB_SACKED_RETRANS)
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
goto fallback;
if (!skb_can_shift(skb))
goto fallback;
/* This frame is about to be dropped (was ACKed). */
if (!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
goto fallback;
/* Can only happen with delayed DSACK + discard craziness */
if (unlikely(skb == tcp_write_queue_head(sk)))
goto fallback;
prev = tcp_write_queue_prev(sk, skb);
if ((TCP_SKB_CB(prev)->sacked & TCPCB_TAGBITS) != TCPCB_SACKED_ACKED)
goto fallback;
tcp: Handle eor bit when coalescing skb This patch: 1. Prevent next_skb from coalescing to the prev_skb if TCP_SKB_CB(prev_skb)->eor is set 2. Update the TCP_SKB_CB(prev_skb)->eor if coalescing is allowed Packetdrill script for testing: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 write(4, ..., 11680) = 11680 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:13141,nop,nop> 0.300 > P. 1:731(730) ack 1 0.300 > P. 731:1461(730) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25 21:44:49 +00:00
if (!tcp_skb_can_collapse_to(prev))
goto fallback;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq) &&
!before(end_seq, TCP_SKB_CB(skb)->end_seq);
if (in_sack) {
len = skb->len;
pcount = tcp_skb_pcount(skb);
mss = tcp_skb_seglen(skb);
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
/* TODO: Fix DSACKs to not fragment already SACKed and we can
* drop this restriction as unnecessary
*/
if (mss != tcp_skb_seglen(prev))
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
goto fallback;
} else {
if (!after(TCP_SKB_CB(skb)->end_seq, start_seq))
goto noop;
/* CHECKME: This is non-MSS split case only?, this will
* cause skipped skbs due to advancing loop btw, original
* has that feature too
*/
if (tcp_skb_pcount(skb) <= 1)
goto noop;
in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq);
if (!in_sack) {
/* TODO: head merge to next could be attempted here
* if (!after(TCP_SKB_CB(skb)->end_seq, end_seq)),
* though it might not be worth of the additional hassle
*
* ...we can probably just fallback to what was done
* previously. We could try merging non-SACKed ones
* as well but it probably isn't going to buy off
* because later SACKs might again split them, and
* it would make skb timestamp tracking considerably
* harder problem.
*/
goto fallback;
}
len = end_seq - TCP_SKB_CB(skb)->seq;
BUG_ON(len < 0);
BUG_ON(len > skb->len);
/* MSS boundaries should be honoured or else pcount will
* severely break even though it makes things bit trickier.
* Optimize common case to avoid most of the divides
*/
mss = tcp_skb_mss(skb);
/* TODO: Fix DSACKs to not fragment already SACKed and we can
* drop this restriction as unnecessary
*/
if (mss != tcp_skb_seglen(prev))
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
goto fallback;
if (len == mss) {
pcount = 1;
} else if (len < mss) {
goto noop;
} else {
pcount = len / mss;
len = pcount * mss;
}
}
tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una This commit fixes tcp_shift_skb_data() so that it does not shift SACKed data below snd_una. This fixes an issue whose symptoms exactly match reports showing tp->sacked_out going negative since 3.3.0-rc4 (see "WARNING: at net/ipv4/tcp_input.c:3418" thread on netdev). Since 2008 (832d11c5cd076abc0aa1eaf7be96c81d1a59ce41) tcp_shift_skb_data() had been shifting SACKed ranges that were below snd_una. It checked that the *end* of the skb it was about to shift from was above snd_una, but did not check that the end of the actual shifted range was above snd_una; this commit adds that check. Shifting SACKed ranges below snd_una is problematic because for such ranges tcp_sacktag_one() short-circuits: it does not declare anything as SACKed and does not increase sacked_out. Before the fixes in commits cc9a672ee522d4805495b98680f4a3db5d0a0af9 and daef52bab1fd26e24e8e9578f8fb33ba1d0cb412, shifting SACKed ranges below snd_una happened to work because tcp_shifted_skb() was always (incorrectly) passing in to tcp_sacktag_one() an skb whose end_seq tcp_shift_skb_data() had already guaranteed was beyond snd_una. Hence tcp_sacktag_one() never short-circuited and always increased tp->sacked_out in this case. After those two fixes, my testing has verified that shifting SACKed ranges below snd_una could cause tp->sacked_out to go negative with the following sequence of events: (1) tcp_shift_skb_data() sees an skb whose end_seq is beyond snd_una, then shifts a prefix of that skb that is below snd_una (2) tcp_shifted_skb() increments the packet count of the already-SACKed prev sk_buff (3) tcp_sacktag_one() sees the end of the new SACKed range is below snd_una, so it short-circuits and doesn't increase tp->sacked_out (5) tcp_clean_rtx_queue() sees the SACKed skb has been ACKed, decrements tp->sacked_out by this "inflated" pcount that was missing a matching increase in tp->sacked_out, and hence tp->sacked_out underflows to a u32 like 0xFFFFFFFF, which casted to s32 is negative. (6) this leads to the warnings seen in the recent "WARNING: at net/ipv4/tcp_input.c:3418" thread on the netdev list; e.g.: tcp_input.c:3418 WARN_ON((int)tp->sacked_out < 0); More generally, I think this bug can be tickled in some cases where two or more ACKs from the receiver are lost and then a DSACK arrives that is immediately above an existing SACKed skb in the write queue. This fix changes tcp_shift_skb_data() to abort this sequence at step (1) in the scenario above by noticing that the bytes are below snd_una and not shifting them. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05 19:35:04 +00:00
/* tcp_sacktag_one() won't SACK-tag ranges below snd_una */
if (!after(TCP_SKB_CB(skb)->seq + len, tp->snd_una))
goto fallback;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
if (!skb_shift(prev, skb, len))
goto fallback;
if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
goto out;
/* Hole filled allows collapsing with the next as well, this is very
* useful when hole on every nth skb pattern happens
*/
if (prev == tcp_write_queue_tail(sk))
goto out;
skb = tcp_write_queue_next(sk, prev);
if (!skb_can_shift(skb) ||
(skb == tcp_send_head(sk)) ||
((TCP_SKB_CB(skb)->sacked & TCPCB_TAGBITS) != TCPCB_SACKED_ACKED) ||
(mss != tcp_skb_seglen(skb)))
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
goto out;
len = skb->len;
if (skb_shift(prev, skb, len)) {
pcount += tcp_skb_pcount(skb);
tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss, 0);
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
}
out:
state->fack_count += pcount;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
return prev;
noop:
return skb;
fallback:
NET_INC_STATS(sock_net(sk), LINUX_MIB_SACKSHIFTFALLBACK);
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
return NULL;
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
static struct sk_buff *tcp_sacktag_walk(struct sk_buff *skb, struct sock *sk,
struct tcp_sack_block *next_dup,
struct tcp_sacktag_state *state,
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
u32 start_seq, u32 end_seq,
bool dup_sack_in)
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
{
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *tmp;
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
tcp_for_write_queue_from(skb, sk) {
int in_sack = 0;
bool dup_sack = dup_sack_in;
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
if (skb == tcp_send_head(sk))
break;
/* queue is in-order => we can short-circuit the walk early */
if (!before(TCP_SKB_CB(skb)->seq, end_seq))
break;
if (next_dup &&
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
before(TCP_SKB_CB(skb)->seq, next_dup->end_seq)) {
in_sack = tcp_match_skb_to_sack(sk, skb,
next_dup->start_seq,
next_dup->end_seq);
if (in_sack > 0)
dup_sack = true;
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
}
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
/* skb reference here is a bit tricky to get right, since
* shifting can eat and free both this skb and the next,
* so not even _safe variant of the loop is enough.
*/
if (in_sack <= 0) {
tmp = tcp_shift_skb_data(sk, skb, state,
start_seq, end_seq, dup_sack);
if (tmp) {
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
if (tmp != skb) {
skb = tmp;
continue;
}
in_sack = 0;
} else {
in_sack = tcp_match_skb_to_sack(sk, skb,
start_seq,
end_seq);
}
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
if (unlikely(in_sack < 0))
break;
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
if (in_sack) {
TCP_SKB_CB(skb)->sacked =
tcp_sacktag_one(sk,
state,
TCP_SKB_CB(skb)->sacked,
TCP_SKB_CB(skb)->seq,
TCP_SKB_CB(skb)->end_seq,
dup_sack,
tcp_skb_pcount(skb),
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
&skb->skb_mstamp);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
tcp: Try to restore large SKBs while SACK processing During SACK processing, most of the benefits of TSO are eaten by the SACK blocks that one-by-one fragment SKBs to MSS sized chunks. Then we're in problems when cleanup work for them has to be done when a large cumulative ACK comes. Try to return back to pre-split state already while more and more SACK info gets discovered by combining newly discovered SACK areas with the previous skb if that's SACKed as well. This approach has a number of benefits: 1) The processing overhead is spread more equally over the RTT 2) Write queue has less skbs to process (affect everything which has to walk in the queue past the sacked areas) 3) Write queue is consistent whole the time, so no other parts of TCP has to be aware of this (this was not the case with some other approach that was, well, quite intrusive all around). 4) Clean_rtx_queue can release most of the pages using single put_page instead of previous PAGE_SIZE/mss+1 calls In case a hole is fully filled by the new SACK block, we attempt to combine the next skb too which allows construction of skbs that are even larger than what tso split them to and it handles hole per on every nth patterns that often occur during slow start overshoot pretty nicely. Though this to be really useful also a retransmission would have to get lost since cumulative ACKs advance one hole at a time in the most typical case. TODO: handle upwards only merging. That should be rather easy when segment is fully sacked but I'm leaving that as future work item (it won't make very large difference anyway since this current approach already covers quite a lot of normal cases). I was earlier thinking of some sophisticated way of tracking timestamps of the first and the last segment but later on realized that it won't be that necessary at all to store the timestamp of the last segment. The cases that can occur are basically either: 1) ambiguous => no sensible measurement can be taken anyway 2) non-ambiguous is due to reordering => having the timestamp of the last segment there is just skewing things more off than does some good since the ack got triggered by one of the holes (besides some substle issues that would make determining right hole/skb even harder problem). Anyway, it has nothing to do with this change then. I choose to route some abnormal looking cases with goto noop, some could be handled differently (eg., by stopping the walking at that skb but again). In general, they either shouldn't happen at all or are rare enough to make no difference in practice. In theory this change (as whole) could cause some macroscale regression (global) because of cache misses that are taken over the round-trip time but it gets very likely better because of much less (local) cache misses per other write queue walkers and the big recovery clearing cumulative ack. Worth to note that these benefits would be very easy to get also without TSO/GSO being on as long as the data is in pages so that we can merge them. Currently I won't let that happen because DSACK splitting at fragment that would mess up pcounts due to sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets avoided, we have some conditions that can be made less strict. TODO: I will probably have to convert the excessive pointer passing to struct sacktag_state... :-) My testing revealed that considerable amount of skbs couldn't be shifted because they were cloned (most likely still awaiting tx reclaim)... [The rest is considering future work instead since I got repeatably EFAULT to tcpdump's recvfrom when I added pskb_expand_head to deal with clones, so I separated that into another, later patch] ...To counter that, I gave up on the fifth advantage: 5) When growing previous SACK block, less allocs for new skbs are done, basically a new alloc is needed only when new hole is detected and when the previous skb runs out of frags space ...which now only happens of if reclaim is fast enough to dispose the clone before the SACK block comes in (the window is RTT long), otherwise we'll have to alloc some. With clones being handled I got these numbers (will be somewhat worse without that), taken with fine-grained mibs: TCPSackShifted 398 TCPSackMerged 877 TCPSackShiftFallback 320 TCPSACKCOLLAPSEFALLBACKGSO 0 TCPSACKCOLLAPSEFALLBACKSKBBITS 0 TCPSACKCOLLAPSEFALLBACKSKBDATA 0 TCPSACKCOLLAPSEFALLBACKBELOW 0 TCPSACKCOLLAPSEFALLBACKFIRST 1 TCPSACKCOLLAPSEFALLBACKPREVBITS 318 TCPSACKCOLLAPSEFALLBACKMSS 1 TCPSACKCOLLAPSEFALLBACKNOHEAD 0 TCPSACKCOLLAPSEFALLBACKSHIFT 0 TCPSACKCOLLAPSENOOPSEQ 0 TCPSACKCOLLAPSENOOPSMALLPCOUNT 0 TCPSACKCOLLAPSENOOPSMALLLEN 0 TCPSACKCOLLAPSEHOLE 12 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 05:20:15 +00:00
if (!before(TCP_SKB_CB(skb)->seq,
tcp_highest_sack_seq(tp)))
tcp_advance_highest_sack(sk, skb);
}
state->fack_count += tcp_skb_pcount(skb);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
}
return skb;
}
/* Avoid all extra work that is being done by sacktag while walking in
* a normal way
*/
static struct sk_buff *tcp_sacktag_skip(struct sk_buff *skb, struct sock *sk,
struct tcp_sacktag_state *state,
u32 skip_to_seq)
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
{
tcp_for_write_queue_from(skb, sk) {
if (skb == tcp_send_head(sk))
break;
if (after(TCP_SKB_CB(skb)->end_seq, skip_to_seq))
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
break;
state->fack_count += tcp_skb_pcount(skb);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
}
return skb;
}
static struct sk_buff *tcp_maybe_skipping_dsack(struct sk_buff *skb,
struct sock *sk,
struct tcp_sack_block *next_dup,
struct tcp_sacktag_state *state,
u32 skip_to_seq)
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
{
if (!next_dup)
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
return skb;
if (before(next_dup->start_seq, skip_to_seq)) {
skb = tcp_sacktag_skip(skb, sk, state, next_dup->start_seq);
skb = tcp_sacktag_walk(skb, sk, NULL, state,
next_dup->start_seq, next_dup->end_seq,
1);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
}
return skb;
}
static int tcp_sack_cache_ok(const struct tcp_sock *tp, const struct tcp_sack_block *cache)
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
{
return cache < tp->recv_sack_cache + ARRAY_SIZE(tp->recv_sack_cache);
}
static int
tcp_sacktag_write_queue(struct sock *sk, const struct sk_buff *ack_skb,
u32 prior_snd_una, struct tcp_sacktag_state *state)
{
struct tcp_sock *tp = tcp_sk(sk);
const unsigned char *ptr = (skb_transport_header(ack_skb) +
TCP_SKB_CB(ack_skb)->sacked);
struct tcp_sack_block_wire *sp_wire = (struct tcp_sack_block_wire *)(ptr+2);
struct tcp_sack_block sp[TCP_NUM_SACKS];
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
struct tcp_sack_block *cache;
struct sk_buff *skb;
int num_sacks = min(TCP_NUM_SACKS, (ptr[1] - TCPOLEN_SACK_BASE) >> 3);
int used_sacks;
bool found_dup_sack = false;
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
int i, j;
int first_sack_index;
state->flag = 0;
state->reord = tp->packets_out;
if (!tp->sacked_out) {
if (WARN_ON(tp->fackets_out))
tp->fackets_out = 0;
tcp_highest_sack_reset(sk);
}
found_dup_sack = tcp_check_dsack(sk, ack_skb, sp_wire,
num_sacks, prior_snd_una);
if (found_dup_sack)
state->flag |= FLAG_DSACKING_ACK;
/* Eliminate too old ACKs, but take into
* account more or less fresh ones, they can
* contain valid SACK info.
*/
if (before(TCP_SKB_CB(ack_skb)->ack_seq, prior_snd_una - tp->max_window))
return 0;
if (!tp->packets_out)
goto out;
used_sacks = 0;
first_sack_index = 0;
for (i = 0; i < num_sacks; i++) {
bool dup_sack = !i && found_dup_sack;
sp[used_sacks].start_seq = get_unaligned_be32(&sp_wire[i].start_seq);
sp[used_sacks].end_seq = get_unaligned_be32(&sp_wire[i].end_seq);
if (!tcp_is_sackblock_valid(tp, dup_sack,
sp[used_sacks].start_seq,
sp[used_sacks].end_seq)) {
int mib_idx;
if (dup_sack) {
if (!tp->undo_marker)
mib_idx = LINUX_MIB_TCPDSACKIGNOREDNOUNDO;
else
mib_idx = LINUX_MIB_TCPDSACKIGNOREDOLD;
} else {
/* Don't count olds caused by ACK reordering */
if ((TCP_SKB_CB(ack_skb)->ack_seq != tp->snd_una) &&
!after(sp[used_sacks].end_seq, tp->snd_una))
continue;
mib_idx = LINUX_MIB_TCPSACKDISCARD;
}
NET_INC_STATS(sock_net(sk), mib_idx);
if (i == 0)
first_sack_index = -1;
continue;
}
/* Ignore very old stuff early */
if (!after(sp[used_sacks].end_seq, prior_snd_una))
continue;
used_sacks++;
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* order SACK blocks to allow in order walk of the retrans queue */
for (i = used_sacks - 1; i > 0; i--) {
for (j = 0; j < i; j++) {
if (after(sp[j].start_seq, sp[j + 1].start_seq)) {
swap(sp[j], sp[j + 1]);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* Track where the first SACK block goes to */
if (j == first_sack_index)
first_sack_index = j + 1;
}
}
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
skb = tcp_write_queue_head(sk);
state->fack_count = 0;
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
i = 0;
if (!tp->sacked_out) {
/* It's already past, so skip checking against it */
cache = tp->recv_sack_cache + ARRAY_SIZE(tp->recv_sack_cache);
} else {
cache = tp->recv_sack_cache;
/* Skip empty blocks in at head of the cache */
while (tcp_sack_cache_ok(tp, cache) && !cache->start_seq &&
!cache->end_seq)
cache++;
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
while (i < used_sacks) {
u32 start_seq = sp[i].start_seq;
u32 end_seq = sp[i].end_seq;
bool dup_sack = (found_dup_sack && (i == first_sack_index));
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
struct tcp_sack_block *next_dup = NULL;
[TCP]: Process DSACKs that reside within a SACK block DSACK inside another SACK block were missed if start_seq of DSACK was larger than SACK block's because sorting prioritizes full processing of the SACK block before DSACK. After SACK block sorting situation is like this: SSSSSSSSS D SSSSSS SSSSSSS Because write_queue is walked in-order, when the first SACK block has been processed, TCP is already past the skb for which the DSACK arrived and we haven't taught it to backtrack (nor should we), so TCP just continues processing by going to the next SACK block after the DSACK (if any). Whenever such DSACK is present, do an embedded checking during the previous SACK block. If the DSACK is below snd_una, there won't be overlapping SACK block, and thus no problem in that case. Also if start_seq of the DSACK is equal to the actual block, it will be processed first. Tested this by using netem to duplicate 15% of packets, and by printing SACK block when found_dup_sack is true and the selected skb in the dup_sack = 1 branch (if taken): SACK block 0: 4344-5792 (relative to snd_una 2019137317) SACK block 1: 4344-5792 (relative to snd_una 2019137317) equal start seqnos => next_dup = 0, dup_sack = 1 won't occur... SACK block 0: 5792-7240 (relative to snd_una 2019214061) SACK block 1: 2896-7240 (relative to snd_una 2019214061) DSACK skb match 5792-7240 (relative to snd_una) ...and next_dup = 1 case (after the not shown start_seq sort), went to dup_sack = 1 branch. Signed-off-by: Ilpo Jrvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 07:09:37 +00:00
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
if (found_dup_sack && ((i + 1) == first_sack_index))
next_dup = &sp[i + 1];
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* Skip too early cached blocks */
while (tcp_sack_cache_ok(tp, cache) &&
!before(start_seq, cache->end_seq))
cache++;
/* Can skip some work by looking recv_sack_cache? */
if (tcp_sack_cache_ok(tp, cache) && !dup_sack &&
after(end_seq, cache->start_seq)) {
/* Head todo? */
if (before(start_seq, cache->start_seq)) {
skb = tcp_sacktag_skip(skb, sk, state,
start_seq);
skb = tcp_sacktag_walk(skb, sk, next_dup,
state,
start_seq,
cache->start_seq,
dup_sack);
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* Rest of the block already fully processed? */
if (!after(end_seq, cache->end_seq))
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
goto advance_sp;
skb = tcp_maybe_skipping_dsack(skb, sk, next_dup,
state,
cache->end_seq);
[TCP]: Process DSACKs that reside within a SACK block DSACK inside another SACK block were missed if start_seq of DSACK was larger than SACK block's because sorting prioritizes full processing of the SACK block before DSACK. After SACK block sorting situation is like this: SSSSSSSSS D SSSSSS SSSSSSS Because write_queue is walked in-order, when the first SACK block has been processed, TCP is already past the skb for which the DSACK arrived and we haven't taught it to backtrack (nor should we), so TCP just continues processing by going to the next SACK block after the DSACK (if any). Whenever such DSACK is present, do an embedded checking during the previous SACK block. If the DSACK is below snd_una, there won't be overlapping SACK block, and thus no problem in that case. Also if start_seq of the DSACK is equal to the actual block, it will be processed first. Tested this by using netem to duplicate 15% of packets, and by printing SACK block when found_dup_sack is true and the selected skb in the dup_sack = 1 branch (if taken): SACK block 0: 4344-5792 (relative to snd_una 2019137317) SACK block 1: 4344-5792 (relative to snd_una 2019137317) equal start seqnos => next_dup = 0, dup_sack = 1 won't occur... SACK block 0: 5792-7240 (relative to snd_una 2019214061) SACK block 1: 2896-7240 (relative to snd_una 2019214061) DSACK skb match 5792-7240 (relative to snd_una) ...and next_dup = 1 case (after the not shown start_seq sort), went to dup_sack = 1 branch. Signed-off-by: Ilpo Jrvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 07:09:37 +00:00
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* ...tail remains todo... */
if (tcp_highest_sack_seq(tp) == cache->end_seq) {
/* ...but better entrypoint exists! */
skb = tcp_highest_sack(sk);
if (!skb)
break;
state->fack_count = tp->fackets_out;
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
cache++;
goto walk;
[TCP]: Process DSACKs that reside within a SACK block DSACK inside another SACK block were missed if start_seq of DSACK was larger than SACK block's because sorting prioritizes full processing of the SACK block before DSACK. After SACK block sorting situation is like this: SSSSSSSSS D SSSSSS SSSSSSS Because write_queue is walked in-order, when the first SACK block has been processed, TCP is already past the skb for which the DSACK arrived and we haven't taught it to backtrack (nor should we), so TCP just continues processing by going to the next SACK block after the DSACK (if any). Whenever such DSACK is present, do an embedded checking during the previous SACK block. If the DSACK is below snd_una, there won't be overlapping SACK block, and thus no problem in that case. Also if start_seq of the DSACK is equal to the actual block, it will be processed first. Tested this by using netem to duplicate 15% of packets, and by printing SACK block when found_dup_sack is true and the selected skb in the dup_sack = 1 branch (if taken): SACK block 0: 4344-5792 (relative to snd_una 2019137317) SACK block 1: 4344-5792 (relative to snd_una 2019137317) equal start seqnos => next_dup = 0, dup_sack = 1 won't occur... SACK block 0: 5792-7240 (relative to snd_una 2019214061) SACK block 1: 2896-7240 (relative to snd_una 2019214061) DSACK skb match 5792-7240 (relative to snd_una) ...and next_dup = 1 case (after the not shown start_seq sort), went to dup_sack = 1 branch. Signed-off-by: Ilpo Jrvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 07:09:37 +00:00
}
skb = tcp_sacktag_skip(skb, sk, state, cache->end_seq);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* Check overlap against next cached too (past this one already) */
cache++;
continue;
}
if (!before(start_seq, tcp_highest_sack_seq(tp))) {
skb = tcp_highest_sack(sk);
if (!skb)
break;
state->fack_count = tp->fackets_out;
}
skb = tcp_sacktag_skip(skb, sk, state, start_seq);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
walk:
skb = tcp_sacktag_walk(skb, sk, next_dup, state,
start_seq, end_seq, dup_sack);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
advance_sp:
i++;
}
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
/* Clear the head of the cache sack blocks so we can skip it next time */
for (i = 0; i < ARRAY_SIZE(tp->recv_sack_cache) - used_sacks; i++) {
tp->recv_sack_cache[i].start_seq = 0;
tp->recv_sack_cache[i].end_seq = 0;
}
for (j = 0; j < used_sacks; j++)
tp->recv_sack_cache[i++] = sp[j];
if ((state->reord < tp->fackets_out) &&
tcp: refactor F-RTO The patch series refactor the F-RTO feature (RFC4138/5682). This is to simplify the loss recovery processing. Existing F-RTO was developed during the experimental stage (RFC4138) and has many experimental features. It takes a separate code path from the traditional timeout processing by overloading CA_Disorder instead of using CA_Loss state. This complicates CA_Disorder state handling because it's also used for handling dubious ACKs and undos. While the algorithm in the RFC does not change the congestion control, the implementation intercepts congestion control in various places (e.g., frto_cwnd in tcp_ack()). The new code implements newer F-RTO RFC5682 using CA_Loss processing path. F-RTO becomes a small extension in the timeout processing and interfaces with congestion control and Eifel undo modules. It lets congestion control (module) determines how many to send independently. F-RTO only chooses what to send in order to detect spurious retranmission. If timeout is found spurious it invokes existing Eifel undo algorithms like DSACK or TCP timestamp based detection. The first patch removes all F-RTO code except the sysctl_tcp_frto is left for the new implementation. Since CA_EVENT_FRTO is removed, TCP westwood now computes ssthresh on regular timeout CA_EVENT_LOSS event. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:32:58 +00:00
((inet_csk(sk)->icsk_ca_state != TCP_CA_Loss) || tp->undo_marker))
tcp_update_reordering(sk, tp->fackets_out - state->reord, 0);
tcp_verify_left_out(tp);
out:
#if FASTRETRANS_DEBUG > 0
WARN_ON((int)tp->sacked_out < 0);
WARN_ON((int)tp->lost_out < 0);
WARN_ON((int)tp->retrans_out < 0);
WARN_ON((int)tcp_packets_in_flight(tp) < 0);
#endif
return state->flag;
}
[TCP]: tcp_simple_retransmit can cause S+L This fixes Bugzilla #10384 tcp_simple_retransmit does L increment without any checking whatsoever for overflowing S+L when Reno is in use. The simplest scenario I can currently think of is rather complex in practice (there might be some more straightforward cases though). Ie., if mss is reduced during mtu probing, it may end up marking everything lost and if some duplicate ACKs arrived prior to that sacked_out will be non-zero as well, leading to S+L > packets_out, tcp_clean_rtx_queue on the next cumulative ACK or tcp_fastretrans_alert on the next duplicate ACK will fix the S counter. More straightforward (but questionable) solution would be to just call tcp_reset_reno_sack() in tcp_simple_retransmit but it would negatively impact the probe's retransmission, ie., the retransmissions would not occur if some duplicate ACKs had arrived. So I had to add reno sacked_out reseting to CA_Loss state when the first cumulative ACK arrives (this stale sacked_out might actually be the explanation for the reports of left_out overflows in kernel prior to 2.6.23 and S+L overflow reports of 2.6.24). However, this alone won't be enough to fix kernel before 2.6.24 because it is building on top of the commit 1b6d427bb7e ([TCP]: Reduce sacked_out with reno when purging write_queue) to keep the sacked_out from overflowing. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:33:07 +00:00
/* Limits sacked_out so that sum with lost_out isn't ever larger than
* packets_out. Returns false if sacked_out adjustement wasn't necessary.
*/
static bool tcp_limit_reno_sacked(struct tcp_sock *tp)
{
u32 holes;
holes = max(tp->lost_out, 1U);
holes = min(holes, tp->packets_out);
if ((tp->sacked_out + holes) > tp->packets_out) {
tp->sacked_out = tp->packets_out - holes;
return true;
}
return false;
[TCP]: tcp_simple_retransmit can cause S+L This fixes Bugzilla #10384 tcp_simple_retransmit does L increment without any checking whatsoever for overflowing S+L when Reno is in use. The simplest scenario I can currently think of is rather complex in practice (there might be some more straightforward cases though). Ie., if mss is reduced during mtu probing, it may end up marking everything lost and if some duplicate ACKs arrived prior to that sacked_out will be non-zero as well, leading to S+L > packets_out, tcp_clean_rtx_queue on the next cumulative ACK or tcp_fastretrans_alert on the next duplicate ACK will fix the S counter. More straightforward (but questionable) solution would be to just call tcp_reset_reno_sack() in tcp_simple_retransmit but it would negatively impact the probe's retransmission, ie., the retransmissions would not occur if some duplicate ACKs had arrived. So I had to add reno sacked_out reseting to CA_Loss state when the first cumulative ACK arrives (this stale sacked_out might actually be the explanation for the reports of left_out overflows in kernel prior to 2.6.23 and S+L overflow reports of 2.6.24). However, this alone won't be enough to fix kernel before 2.6.24 because it is building on top of the commit 1b6d427bb7e ([TCP]: Reduce sacked_out with reno when purging write_queue) to keep the sacked_out from overflowing. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:33:07 +00:00
}
/* If we receive more dupacks than we expected counting segments
* in assumption of absent reordering, interpret this as reordering.
* The only another reason could be bug in receiver TCP.
*/
static void tcp_check_reno_reordering(struct sock *sk, const int addend)
{
struct tcp_sock *tp = tcp_sk(sk);
if (tcp_limit_reno_sacked(tp))
tcp_update_reordering(sk, tp->packets_out + addend, 0);
}
/* Emulate SACKs for SACKless connection: account for a new dupack. */
static void tcp_add_reno_sack(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
u32 prior_sacked = tp->sacked_out;
tp->sacked_out++;
tcp_check_reno_reordering(sk, 0);
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
if (tp->sacked_out > prior_sacked)
tp->delivered++; /* Some out-of-order packet is delivered */
tcp_verify_left_out(tp);
}
/* Account for ACK, ACKing some data in Reno Recovery phase. */
static void tcp_remove_reno_sacks(struct sock *sk, int acked)
{
struct tcp_sock *tp = tcp_sk(sk);
if (acked > 0) {
/* One ACK acked hole. The rest eat duplicate ACKs. */
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
tp->delivered += max_t(int, acked - tp->sacked_out, 1);
if (acked - 1 >= tp->sacked_out)
tp->sacked_out = 0;
else
tp->sacked_out -= acked - 1;
}
tcp_check_reno_reordering(sk, acked);
tcp_verify_left_out(tp);
}
static inline void tcp_reset_reno_sack(struct tcp_sock *tp)
{
tp->sacked_out = 0;
}
void tcp_clear_retrans(struct tcp_sock *tp)
{
tp->retrans_out = 0;
tp->lost_out = 0;
tp->undo_marker = 0;
tp->undo_retrans = -1;
tp->fackets_out = 0;
tp->sacked_out = 0;
}
static inline void tcp_init_undo(struct tcp_sock *tp)
{
tp->undo_marker = tp->snd_una;
/* Retransmission still in flight may cause DSACKs later. */
tp->undo_retrans = tp->retrans_out ? : -1;
}
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
/* Enter Loss state. If we detect SACK reneging, forget all SACK information
* and reset tags completely, otherwise preserve SACKs. If receiver
* dropped its ofo queue, we will know this due to reneging detection.
*/
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
void tcp_enter_loss(struct sock *sk)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct net *net = sock_net(sk);
struct sk_buff *skb;
bool new_recovery = icsk->icsk_ca_state < TCP_CA_Recovery;
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
bool is_reneg; /* is receiver reneging on SACKs? */
/* Reduce ssthresh if it has not yet been made inside this window. */
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (icsk->icsk_ca_state <= TCP_CA_Disorder ||
!after(tp->high_seq, tp->snd_una) ||
(icsk->icsk_ca_state == TCP_CA_Loss && !icsk->icsk_retransmits)) {
tp->prior_ssthresh = tcp_current_ssthresh(sk);
tp->snd_ssthresh = icsk->icsk_ca_ops->ssthresh(sk);
tcp_ca_event(sk, CA_EVENT_LOSS);
tcp_init_undo(tp);
}
tp->snd_cwnd = 1;
tp->snd_cwnd_cnt = 0;
tp->snd_cwnd_stamp = tcp_time_stamp;
tp->retrans_out = 0;
tp->lost_out = 0;
if (tcp_is_reno(tp))
tcp_reset_reno_sack(tp);
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
skb = tcp_write_queue_head(sk);
is_reneg = skb && (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED);
if (is_reneg) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSACKRENEGING);
tp->sacked_out = 0;
tp->fackets_out = 0;
}
tcp_clear_all_retrans_hints(tp);
tcp_for_write_queue(skb, sk) {
if (skb == tcp_send_head(sk))
break;
TCP_SKB_CB(skb)->sacked &= (~TCPCB_TAGBITS)|TCPCB_SACKED_ACKED;
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
if (!(TCP_SKB_CB(skb)->sacked&TCPCB_SACKED_ACKED) || is_reneg) {
TCP_SKB_CB(skb)->sacked &= ~TCPCB_SACKED_ACKED;
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
tp->lost_out += tcp_skb_pcount(skb);
tp->retransmit_high = TCP_SKB_CB(skb)->end_seq;
}
}
tcp_verify_left_out(tp);
/* Timeout in disordered state after receiving substantial DUPACKs
* suggests that the degree of reordering is over-estimated.
*/
if (icsk->icsk_ca_state <= TCP_CA_Disorder &&
tp->sacked_out >= net->ipv4.sysctl_tcp_reordering)
tp->reordering = min_t(unsigned int, tp->reordering,
net->ipv4.sysctl_tcp_reordering);
tcp_set_ca_state(sk, TCP_CA_Loss);
tp->high_seq = tp->snd_nxt;
tcp_ecn_queue_cwr(tp);
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
/* F-RTO RFC5682 sec 3.1 step 1: retransmit SND.UNA if no previous
* loss recovery is underway except recurring timeout(s) on
* the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
*/
tp->frto = sysctl_tcp_frto &&
(new_recovery || icsk->icsk_retransmits) &&
!inet_csk(sk)->icsk_mtup.probe_size;
}
/* If ACK arrived pointing to a remembered SACK, it means that our
* remembered SACKs do not reflect real state of receiver i.e.
* receiver _host_ is heavily congested (or buggy).
*
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
* To avoid big spurious retransmission bursts due to transient SACK
* scoreboard oddities that look like reneging, we give the receiver a
* little time (max(RTT/2, 10ms)) to send us some more ACKs that will
* restore sanity to the SACK scoreboard. If the apparent reneging
* persists until this RTO then we'll clear the SACK scoreboard.
*/
static bool tcp_check_sack_reneging(struct sock *sk, int flag)
{
if (flag & FLAG_SACK_RENEGING) {
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
struct tcp_sock *tp = tcp_sk(sk);
unsigned long delay = max(usecs_to_jiffies(tp->srtt_us >> 4),
msecs_to_jiffies(10));
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
tcp: reduce spurious retransmits due to transient SACK reneging This commit reduces spurious retransmits due to apparent SACK reneging by only reacting to SACK reneging that persists for a short delay. When a sequence space hole at snd_una is filled, some TCP receivers send a series of ACKs as they apparently scan their out-of-order queue and cumulatively ACK all the packets that have now been consecutiveyly received. This is essentially misbehavior B in "Misbehaviors in TCP SACK generation" ACM SIGCOMM Computer Communication Review, April 2011, so we suspect that this is from several common OSes (Windows 2000, Windows Server 2003, Windows XP). However, this issue has also been seen in other cases, e.g. the netdev thread "TCP being hoodwinked into spurious retransmissions by lack of timestamps?" from March 2014, where the receiver was thought to be a BSD box. Since snd_una would temporarily be adjacent to a previously SACKed range in these scenarios, this receiver behavior triggered the Linux SACK reneging code path in the sender. This led the sender to clear the SACK scoreboard, enter CA_Loss, and spuriously retransmit (potentially) every packet from the entire write queue at line rate just a few milliseconds before the ACK for each packet arrives at the sender. To avoid such situations, now when a sender sees apparent reneging it does not yet retransmit, but rather adjusts the RTO timer to give the receiver a little time (max(RTT/2, 10ms)) to send us some more ACKs that will restore sanity to the SACK scoreboard. If the reneging persists until this RTO then, as before, we clear the SACK scoreboard and enter CA_Loss. A 10ms delay tolerates a receiver sending such a stream of ACKs at 56Kbit/sec. And to allow for receivers with slower or more congested paths, we wait for at least RTT/2. We validated the resulting max(RTT/2, 10ms) delay formula with a mix of North American and South American Google web server traffic, and found that for ACKs displaying transient reneging: (1) 90% of inter-ACK delays were less than 10ms (2) 99% of inter-ACK delays were less than RTT/2 In tests on Google web servers this commit reduced reneging events by 75%-90% (as measured by the TcpExtTCPSACKReneging counter), without any measurable impact on latency for user HTTP and SPDY requests. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 23:12:29 +00:00
delay, TCP_RTO_MAX);
return true;
}
return false;
}
static inline int tcp_fackets_out(const struct tcp_sock *tp)
{
return tcp_is_reno(tp) ? tp->sacked_out + 1 : tp->fackets_out;
}
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
/* Heurestics to calculate number of duplicate ACKs. There's no dupACKs
* counter when SACK is enabled (without SACK, sacked_out is used for
* that purpose).
*
* Instead, with FACK TCP uses fackets_out that includes both SACKed
* segments up to the highest received SACK block so far and holes in
* between them.
*
* With reordering, holes may still be in flight, so RFC3517 recovery
* uses pure sacked_out (total number of SACKed segments) even though
* it violates the RFC that uses duplicate ACKs, often these are equal
* but when e.g. out-of-window ACKs or packet duplication occurs,
* they differ. Since neither occurs due to loss, TCP should really
* ignore them.
*/
static inline int tcp_dupack_heuristics(const struct tcp_sock *tp)
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
{
return tcp_is_fack(tp) ? tp->fackets_out : tp->sacked_out + 1;
}
static bool tcp_pause_early_retransmit(struct sock *sk, int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
unsigned long delay;
/* Delay early retransmit and entering fast recovery for
* max(RTT/4, 2msec) unless ack has ECE mark, no RTT samples
* available, or RTO is scheduled to fire first.
*/
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
if (sysctl_tcp_early_retrans < 2 || sysctl_tcp_early_retrans > 3 ||
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
(flag & FLAG_ECE) || !tp->srtt_us)
return false;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
delay = max(usecs_to_jiffies(tp->srtt_us >> 5),
msecs_to_jiffies(2));
if (!time_after(inet_csk(sk)->icsk_timeout, (jiffies + delay)))
return false;
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
inet_csk_reset_xmit_timer(sk, ICSK_TIME_EARLY_RETRANS, delay,
TCP_RTO_MAX);
return true;
}
/* Linux NewReno/SACK/FACK/ECN state machine.
* --------------------------------------
*
* "Open" Normal state, no dubious events, fast path.
* "Disorder" In all the respects it is "Open",
* but requires a bit more attention. It is entered when
* we see some SACKs or dupacks. It is split of "Open"
* mainly to move some processing from fast path to slow one.
* "CWR" CWND was reduced due to some Congestion Notification event.
* It can be ECN, ICMP source quench, local device congestion.
* "Recovery" CWND was reduced, we are fast-retransmitting.
* "Loss" CWND was reduced due to RTO timeout or SACK reneging.
*
* tcp_fastretrans_alert() is entered:
* - each incoming ACK, if state is not "Open"
* - when arrived ACK is unusual, namely:
* * SACK
* * Duplicate ACK.
* * ECN ECE.
*
* Counting packets in flight is pretty simple.
*
* in_flight = packets_out - left_out + retrans_out
*
* packets_out is SND.NXT-SND.UNA counted in packets.
*
* retrans_out is number of retransmitted segments.
*
* left_out is number of segments left network, but not ACKed yet.
*
* left_out = sacked_out + lost_out
*
* sacked_out: Packets, which arrived to receiver out of order
* and hence not ACKed. With SACKs this number is simply
* amount of SACKed data. Even without SACKs
* it is easy to give pretty reliable estimate of this number,
* counting duplicate ACKs.
*
* lost_out: Packets lost by network. TCP has no explicit
* "loss notification" feedback from network (for now).
* It means that this number can be only _guessed_.
* Actually, it is the heuristics to predict lossage that
* distinguishes different algorithms.
*
* F.e. after RTO, when all the queue is considered as lost,
* lost_out = packets_out and in_flight = retrans_out.
*
* Essentially, we have now two algorithms counting
* lost packets.
*
* FACK: It is the simplest heuristics. As soon as we decided
* that something is lost, we decide that _all_ not SACKed
* packets until the most forward SACK are lost. I.e.
* lost_out = fackets_out - sacked_out and left_out = fackets_out.
* It is absolutely correct estimate, if network does not reorder
* packets. And it loses any connection to reality when reordering
* takes place. We use FACK by default until reordering
* is suspected on the path to this destination.
*
* NewReno: when Recovery is entered, we assume that one segment
* is lost (classic Reno). While we are in Recovery and
* a partial ACK arrives, we assume that one more packet
* is lost (NewReno). This heuristics are the same in NewReno
* and SACK.
*
* Imagine, that's all! Forget about all this shamanism about CWND inflation
* deflation etc. CWND is real congestion window, never inflated, changes
* only according to classic VJ rules.
*
* Really tricky (and requiring careful tuning) part of algorithm
* is hidden in functions tcp_time_to_recover() and tcp_xmit_retransmit_queue().
* The first determines the moment _when_ we should reduce CWND and,
* hence, slow down forward transmission. In fact, it determines the moment
* when we decide that hole is caused by loss, rather than by a reorder.
*
* tcp_xmit_retransmit_queue() decides, _what_ we should retransmit to fill
* holes, caused by lost packets.
*
* And the most logically complicated part of algorithm is undo
* heuristics. We detect false retransmits due to both too early
* fast retransmit (reordering) and underestimated RTO, analyzing
* timestamps and D-SACKs. When we detect that some segments were
* retransmitted by mistake and CWND reduction was wrong, we undo
* window reduction and abort recovery phase. This logic is hidden
* inside several functions named tcp_try_undo_<something>.
*/
/* This function decides, when we should leave Disordered state
* and enter Recovery phase, reducing congestion window.
*
* Main question: may we further continue forward transmission
* with the same cwnd?
*/
static bool tcp_time_to_recover(struct sock *sk, int flag)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
__u32 packets_out;
int tcp_reordering = sock_net(sk)->ipv4.sysctl_tcp_reordering;
/* Trick#1: The loss is proven. */
if (tp->lost_out)
return true;
/* Not-A-Trick#2 : Classic rule... */
if (tcp_dupack_heuristics(tp) > tp->reordering)
return true;
/* Trick#4: It is still not OK... But will it be useful to delay
* recovery more?
*/
packets_out = tp->packets_out;
if (packets_out <= tp->reordering &&
tp->sacked_out >= max_t(__u32, packets_out/2, tcp_reordering) &&
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
!tcp_may_send_now(sk)) {
/* We have nothing to send. This connection is limited
* either by receiver window or by application.
*/
return true;
}
/* If a thin stream is detected, retransmit after first
* received dupack. Employ only if SACK is supported in order
* to avoid possible corner-case series of spurious retransmissions
* Use only if there are no unsent data.
*/
if ((tp->thin_dupack || sysctl_tcp_thin_dupack) &&
tcp_stream_is_thin(tp) && tcp_dupack_heuristics(tp) > 1 &&
tcp_is_sack(tp) && !tcp_send_head(sk))
return true;
tcp: early retransmit This patch implements RFC 5827 early retransmit (ER) for TCP. It reduces DUPACK threshold (dupthresh) if outstanding packets are less than 4 to recover losses by fast recovery instead of timeout. While the algorithm is simple, small but frequent network reordering makes this feature dangerous: the connection repeatedly enter false recovery and degrade performance. Therefore we implement a mitigation suggested in the appendix of the RFC that delays entering fast recovery by a small interval, i.e., RTT/4. Currently ER is conservative and is disabled for the rest of the connection after the first reordering event. A large scale web server experiment on the performance impact of ER is summarized in section 6 of the paper "Proportional Rate Reduction for TCP”, IMC 2011. http://conferences.sigcomm.org/imc/2011/docs/p155.pdf Note that Linux has a similar feature called THIN_DUPACK. The differences are THIN_DUPACK do not mitigate reorderings and is only used after slow start. Currently ER is disabled if THIN_DUPACK is enabled. I would be happy to merge THIN_DUPACK feature with ER if people think it's a good idea. ER is enabled by sysctl_tcp_early_retrans: 0: Disables ER 1: Reduce dupthresh to packets_out - 1 when outstanding packets < 4. 2: (Default) reduce dupthresh like mode 1. In addition, delay entering fast recovery by RTT/4. Note: mode 2 is implemented in the third part of this patch series. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 13:30:03 +00:00
/* Trick#6: TCP early retransmit, per RFC5827. To avoid spurious
* retransmissions due to small network reorderings, we implement
* Mitigation A.3 in the RFC and delay the retransmission for a short
* interval if appropriate.
*/
if (tp->do_early_retrans && !tp->retrans_out && tp->sacked_out &&
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
(tp->packets_out >= (tp->sacked_out + 1) && tp->packets_out < 4) &&
tcp: early retransmit This patch implements RFC 5827 early retransmit (ER) for TCP. It reduces DUPACK threshold (dupthresh) if outstanding packets are less than 4 to recover losses by fast recovery instead of timeout. While the algorithm is simple, small but frequent network reordering makes this feature dangerous: the connection repeatedly enter false recovery and degrade performance. Therefore we implement a mitigation suggested in the appendix of the RFC that delays entering fast recovery by a small interval, i.e., RTT/4. Currently ER is conservative and is disabled for the rest of the connection after the first reordering event. A large scale web server experiment on the performance impact of ER is summarized in section 6 of the paper "Proportional Rate Reduction for TCP”, IMC 2011. http://conferences.sigcomm.org/imc/2011/docs/p155.pdf Note that Linux has a similar feature called THIN_DUPACK. The differences are THIN_DUPACK do not mitigate reorderings and is only used after slow start. Currently ER is disabled if THIN_DUPACK is enabled. I would be happy to merge THIN_DUPACK feature with ER if people think it's a good idea. ER is enabled by sysctl_tcp_early_retrans: 0: Disables ER 1: Reduce dupthresh to packets_out - 1 when outstanding packets < 4. 2: (Default) reduce dupthresh like mode 1. In addition, delay entering fast recovery by RTT/4. Note: mode 2 is implemented in the third part of this patch series. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 13:30:03 +00:00
!tcp_may_send_now(sk))
return !tcp_pause_early_retransmit(sk, flag);
tcp: early retransmit This patch implements RFC 5827 early retransmit (ER) for TCP. It reduces DUPACK threshold (dupthresh) if outstanding packets are less than 4 to recover losses by fast recovery instead of timeout. While the algorithm is simple, small but frequent network reordering makes this feature dangerous: the connection repeatedly enter false recovery and degrade performance. Therefore we implement a mitigation suggested in the appendix of the RFC that delays entering fast recovery by a small interval, i.e., RTT/4. Currently ER is conservative and is disabled for the rest of the connection after the first reordering event. A large scale web server experiment on the performance impact of ER is summarized in section 6 of the paper "Proportional Rate Reduction for TCP”, IMC 2011. http://conferences.sigcomm.org/imc/2011/docs/p155.pdf Note that Linux has a similar feature called THIN_DUPACK. The differences are THIN_DUPACK do not mitigate reorderings and is only used after slow start. Currently ER is disabled if THIN_DUPACK is enabled. I would be happy to merge THIN_DUPACK feature with ER if people think it's a good idea. ER is enabled by sysctl_tcp_early_retrans: 0: Disables ER 1: Reduce dupthresh to packets_out - 1 when outstanding packets < 4. 2: (Default) reduce dupthresh like mode 1. In addition, delay entering fast recovery by RTT/4. Note: mode 2 is implemented in the third part of this patch series. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 13:30:03 +00:00
return false;
}
/* Detect loss in event "A" above by marking head of queue up as lost.
* For FACK or non-SACK(Reno) senders, the first "packets" number of segments
* are considered lost. For RFC3517 SACK, a segment is considered lost if it
* has at least tp->reordering SACKed seqments above it; "packets" refers to
* the maximum SACKed segments to pass before reaching this limit.
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
*/
static void tcp_mark_head_lost(struct sock *sk, int packets, int mark_head)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb;
tcp: fix tcp_mark_head_lost to check skb len before fragmenting This commit fixes a corner case in tcp_mark_head_lost() which was causing the WARN_ON(len > skb->len) in tcp_fragment() to fire. tcp_mark_head_lost() was assuming that if a packet has tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of M*mss bytes, for any M < N. But with the tricky way TCP pcounts are maintained, this is not always true. For example, suppose the sender sends 4 1-byte packets and have the last 3 packet sacked. It will merge the last 3 packets in the write queue into an skb with pcount = 3 and len = 3 bytes. If another recovery happens after a sack reneging event, tcp_mark_head_lost() may attempt to split the skb assuming it has more than 2*MSS bytes. This sounds very counterintuitive, but as the commit description for the related commit c0638c247f55 ("tcp: don't fragment SACKed skbs in tcp_mark_head_lost()") notes, this is because tcp_shifted_skb() coalesces adjacent regions of SACKed skbs, and when doing this it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. The c0638c247f55 commit tried to avoid problems by not fragmenting SACKed skbs, since SACKed skbs are where the non-proportionality between pcount and skb->len/mss is known to be possible. However, that commit did not handle the case where during a reneging event one of these weird SACKed skbs becomes an un-SACKed skb, which tcp_mark_head_lost() can then try to fragment. The fix is to simply mark the entire skb lost when this happens. This makes the recovery slightly more aggressive in such corner cases before we detect reordering. But once we detect reordering this code path is by-passed because FACK is disabled. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 22:01:53 +00:00
int cnt, oldcnt, lost;
[TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:32:38 +00:00
unsigned int mss;
/* Use SACK to deduce losses of new sequences sent during recovery */
const u32 loss_high = tcp_is_sack(tp) ? tp->snd_nxt : tp->high_seq;
WARN_ON(packets > tp->packets_out);
if (tp->lost_skb_hint) {
skb = tp->lost_skb_hint;
cnt = tp->lost_cnt_hint;
/* Head already handled? */
if (mark_head && skb != tcp_write_queue_head(sk))
return;
} else {
skb = tcp_write_queue_head(sk);
cnt = 0;
}
tcp_for_write_queue_from(skb, sk) {
if (skb == tcp_send_head(sk))
break;
/* TODO: do this better */
/* this is not the most efficient way to do this... */
tp->lost_skb_hint = skb;
tp->lost_cnt_hint = cnt;
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
if (after(TCP_SKB_CB(skb)->end_seq, loss_high))
[TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:32:38 +00:00
break;
oldcnt = cnt;
if (tcp_is_fack(tp) || tcp_is_reno(tp) ||
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))
cnt += tcp_skb_pcount(skb);
[TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:32:38 +00:00
if (cnt > packets) {
if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) ||
(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) ||
(oldcnt >= packets))
[TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:32:38 +00:00
break;
mss = tcp_skb_mss(skb);
tcp: fix tcp_mark_head_lost to check skb len before fragmenting This commit fixes a corner case in tcp_mark_head_lost() which was causing the WARN_ON(len > skb->len) in tcp_fragment() to fire. tcp_mark_head_lost() was assuming that if a packet has tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of M*mss bytes, for any M < N. But with the tricky way TCP pcounts are maintained, this is not always true. For example, suppose the sender sends 4 1-byte packets and have the last 3 packet sacked. It will merge the last 3 packets in the write queue into an skb with pcount = 3 and len = 3 bytes. If another recovery happens after a sack reneging event, tcp_mark_head_lost() may attempt to split the skb assuming it has more than 2*MSS bytes. This sounds very counterintuitive, but as the commit description for the related commit c0638c247f55 ("tcp: don't fragment SACKed skbs in tcp_mark_head_lost()") notes, this is because tcp_shifted_skb() coalesces adjacent regions of SACKed skbs, and when doing this it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. The c0638c247f55 commit tried to avoid problems by not fragmenting SACKed skbs, since SACKed skbs are where the non-proportionality between pcount and skb->len/mss is known to be possible. However, that commit did not handle the case where during a reneging event one of these weird SACKed skbs becomes an un-SACKed skb, which tcp_mark_head_lost() can then try to fragment. The fix is to simply mark the entire skb lost when this happens. This makes the recovery slightly more aggressive in such corner cases before we detect reordering. But once we detect reordering this code path is by-passed because FACK is disabled. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 22:01:53 +00:00
/* If needed, chop off the prefix to mark as lost. */
lost = (packets - oldcnt) * mss;
if (lost < skb->len &&
tcp_fragment(sk, skb, lost, mss, GFP_ATOMIC) < 0)
[TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-08 05:32:38 +00:00
break;
cnt = packets;
}
tcp_skb_mark_lost(tp, skb);
if (mark_head)
break;
}
tcp_verify_left_out(tp);
}
/* Account newly detected lost packet(s) */
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
static void tcp_update_scoreboard(struct sock *sk, int fast_rexmit)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
if (tcp_is_reno(tp)) {
tcp_mark_head_lost(sk, 1, 1);
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
} else if (tcp_is_fack(tp)) {
int lost = tp->fackets_out - tp->reordering;
if (lost <= 0)
lost = 1;
tcp_mark_head_lost(sk, lost, 0);
} else {
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
int sacked_upto = tp->sacked_out - tp->reordering;
if (sacked_upto >= 0)
tcp_mark_head_lost(sk, sacked_upto, 0);
else if (fast_rexmit)
tcp_mark_head_lost(sk, 1, 1);
}
}
static bool tcp_tsopt_ecr_before(const struct tcp_sock *tp, u32 when)
{
return tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr &&
before(tp->rx_opt.rcv_tsecr, when);
}
tcp: track the packet timings in RACK This patch is the first half of the RACK loss recovery. RACK loss recovery uses the notion of time instead of packet sequence (FACK) or counts (dupthresh). It's inspired by the previous FACK heuristic in tcp_mark_lost_retrans(): when a limited transmit (new data packet) is sacked, then current retransmitted sequence below the newly sacked sequence must been lost, since at least one round trip time has elapsed. But it has several limitations: 1) can't detect tail drops since it depends on limited transmit 2) is disabled upon reordering (assumes no reordering) 3) only enabled in fast recovery ut not timeout recovery RACK (Recently ACK) addresses these limitations with the notion of time instead: a packet P1 is lost if a later packet P2 is s/acked, as at least one round trip has passed. Since RACK cares about the time sequence instead of the data sequence of packets, it can detect tail drops when later retransmission is s/acked while FACK or dupthresh can't. For reordering RACK uses a dynamically adjusted reordering window ("reo_wnd") to reduce false positives on ever (small) degree of reordering. This patch implements tcp_advanced_rack() which tracks the most recent transmission time among the packets that have been delivered (ACKed or SACKed) in tp->rack.mstamp. This timestamp is the key to determine which packet has been lost. Consider an example that the sender sends six packets: T1: P1 (lost) T2: P2 T3: P3 T4: P4 T100: sack of P2. rack.mstamp = T2 T101: retransmit P1 T102: sack of P2,P3,P4. rack.mstamp = T4 T205: ACK of P4 since the hole is repaired. rack.mstamp = T101 We need to be careful about spurious retransmission because it may falsely advance tp->rack.mstamp by an RTT or an RTO, causing RACK to falsely mark all packets lost, just like a spurious timeout. We identify spurious retransmission by the ACK's TS echo value. If TS option is not applicable but the retransmission is acknowledged less than min-RTT ago, it is likely to be spurious. We refrain from using the transmission time of these spurious retransmissions. The second half is implemented in the next patch that marks packet lost using RACK timestamp. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:46 +00:00
/* skb is spurious retransmitted if the returned timestamp echo
* reply is prior to the skb transmission time
*/
static bool tcp_skb_spurious_retrans(const struct tcp_sock *tp,
const struct sk_buff *skb)
{
return (TCP_SKB_CB(skb)->sacked & TCPCB_RETRANS) &&
tcp_tsopt_ecr_before(tp, tcp_skb_timestamp(skb));
}
/* Nothing was retransmitted or returned timestamp is less
* than timestamp of the first retransmission.
*/
static inline bool tcp_packet_delayed(const struct tcp_sock *tp)
{
return !tp->retrans_stamp ||
tcp_tsopt_ecr_before(tp, tp->retrans_stamp);
}
/* Undo procedures. */
tcp: zero retrans_stamp if all retrans were acked Ueki Kohei reported that when we are using NewReno with connections that have a very low traffic, we may timeout the connection too early if a second loss occurs after the first one was successfully acked but no data was transfered later. Below is his description of it: When SACK is disabled, and a socket suffers multiple separate TCP retransmissions, that socket's ETIMEDOUT value is calculated from the time of the *first* retransmission instead of the *latest* retransmission. This happens because the tcp_sock's retrans_stamp is set once then never cleared. Take the following connection: Linux remote-machine | | send#1---->(*1)|--------> data#1 --------->| | | | RTO : : | | | ---(*2)|----> data#1(retrans) ---->| | (*3)|<---------- ACK <----------| | | | | : : | : : | : : 16 minutes (or more) : | : : | : : | : : | | | send#2---->(*4)|--------> data#2 --------->| | | | RTO : : | | | ---(*5)|----> data#2(retrans) ---->| | | | | | | RTO*2 : : | | | | | | ETIMEDOUT<----(*6)| | (*1) One data packet sent. (*2) Because no ACK packet is received, the packet is retransmitted. (*3) The ACK packet is received. The transmitted packet is acknowledged. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". (*4) After 16 minutes (to correspond with retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4). The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago. (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT. Therefore, now we clear retrans_stamp as soon as all data during the loss window is fully acked. Reported-by: Ueki Kohei Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04 19:15:08 +00:00
/* We can clear retrans_stamp when there are no retransmissions in the
* window. It would seem that it is trivially available for us in
* tp->retrans_out, however, that kind of assumptions doesn't consider
* what will happen if errors occur when sending retransmission for the
* second time. ...It could the that such segment has only
* TCPCB_EVER_RETRANS set at the present time. It seems that checking
* the head skb is enough except for some reneging corner cases that
* are not worth the effort.
*
* Main reason for all this complexity is the fact that connection dying
* time now depends on the validity of the retrans_stamp, in particular,
* that successive retransmissions of a segment must not advance
* retrans_stamp under any conditions.
*/
static bool tcp_any_retrans_done(const struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb;
if (tp->retrans_out)
return true;
skb = tcp_write_queue_head(sk);
if (unlikely(skb && TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS))
return true;
return false;
}
#if FASTRETRANS_DEBUG > 1
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
static void DBGUNDO(struct sock *sk, const char *msg)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
struct inet_sock *inet = inet_sk(sk);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
if (sk->sk_family == AF_INET) {
pr_debug("Undo %s %pI4/%u c%u l%u ss%u/%u p%u\n",
msg,
&inet->inet_daddr, ntohs(inet->inet_dport),
tp->snd_cwnd, tcp_left_out(tp),
tp->snd_ssthresh, tp->prior_ssthresh,
tp->packets_out);
}
#if IS_ENABLED(CONFIG_IPV6)
else if (sk->sk_family == AF_INET6) {
struct ipv6_pinfo *np = inet6_sk(sk);
pr_debug("Undo %s %pI6/%u c%u l%u ss%u/%u p%u\n",
msg,
&np->daddr, ntohs(inet->inet_dport),
tp->snd_cwnd, tcp_left_out(tp),
tp->snd_ssthresh, tp->prior_ssthresh,
tp->packets_out);
}
#endif
}
#else
#define DBGUNDO(x...) do { } while (0)
#endif
static void tcp_undo_cwnd_reduction(struct sock *sk, bool unmark_loss)
{
struct tcp_sock *tp = tcp_sk(sk);
if (unmark_loss) {
struct sk_buff *skb;
tcp_for_write_queue(skb, sk) {
if (skb == tcp_send_head(sk))
break;
TCP_SKB_CB(skb)->sacked &= ~TCPCB_LOST;
}
tp->lost_out = 0;
tcp_clear_all_retrans_hints(tp);
}
if (tp->prior_ssthresh) {
const struct inet_connection_sock *icsk = inet_csk(sk);
if (icsk->icsk_ca_ops->undo_cwnd)
tp->snd_cwnd = icsk->icsk_ca_ops->undo_cwnd(sk);
else
tp->snd_cwnd = max(tp->snd_cwnd, tp->snd_ssthresh << 1);
if (tp->prior_ssthresh > tp->snd_ssthresh) {
tp->snd_ssthresh = tp->prior_ssthresh;
tcp_ecn_withdraw_cwr(tp);
}
}
tp->snd_cwnd_stamp = tcp_time_stamp;
tp->undo_marker = 0;
}
static inline bool tcp_may_undo(const struct tcp_sock *tp)
{
return tp->undo_marker && (!tp->undo_retrans || tcp_packet_delayed(tp));
}
/* People celebrate: "We love our President!" */
static bool tcp_try_undo_recovery(struct sock *sk)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
if (tcp_may_undo(tp)) {
int mib_idx;
/* Happy end! We did not retransmit anything
* or our original transmission succeeded.
*/
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
DBGUNDO(sk, inet_csk(sk)->icsk_ca_state == TCP_CA_Loss ? "loss" : "retrans");
tcp_undo_cwnd_reduction(sk, false);
if (inet_csk(sk)->icsk_ca_state == TCP_CA_Loss)
mib_idx = LINUX_MIB_TCPLOSSUNDO;
else
mib_idx = LINUX_MIB_TCPFULLUNDO;
NET_INC_STATS(sock_net(sk), mib_idx);
}
if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) {
/* Hold old state until something *above* high_seq
* is ACKed. For Reno it is MUST to prevent false
* fast retransmits (RFC2582). SACK TCP is safe. */
tcp: zero retrans_stamp if all retrans were acked Ueki Kohei reported that when we are using NewReno with connections that have a very low traffic, we may timeout the connection too early if a second loss occurs after the first one was successfully acked but no data was transfered later. Below is his description of it: When SACK is disabled, and a socket suffers multiple separate TCP retransmissions, that socket's ETIMEDOUT value is calculated from the time of the *first* retransmission instead of the *latest* retransmission. This happens because the tcp_sock's retrans_stamp is set once then never cleared. Take the following connection: Linux remote-machine | | send#1---->(*1)|--------> data#1 --------->| | | | RTO : : | | | ---(*2)|----> data#1(retrans) ---->| | (*3)|<---------- ACK <----------| | | | | : : | : : | : : 16 minutes (or more) : | : : | : : | : : | | | send#2---->(*4)|--------> data#2 --------->| | | | RTO : : | | | ---(*5)|----> data#2(retrans) ---->| | | | | | | RTO*2 : : | | | | | | ETIMEDOUT<----(*6)| | (*1) One data packet sent. (*2) Because no ACK packet is received, the packet is retransmitted. (*3) The ACK packet is received. The transmitted packet is acknowledged. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". (*4) After 16 minutes (to correspond with retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4). The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago. (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT. Therefore, now we clear retrans_stamp as soon as all data during the loss window is fully acked. Reported-by: Ueki Kohei Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04 19:15:08 +00:00
if (!tcp_any_retrans_done(sk))
tp->retrans_stamp = 0;
return true;
}
tcp_set_ca_state(sk, TCP_CA_Open);
return false;
}
/* Try to undo cwnd reduction, because D-SACKs acked all retransmitted data */
static bool tcp_try_undo_dsack(struct sock *sk)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
if (tp->undo_marker && !tp->undo_retrans) {
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
DBGUNDO(sk, "D-SACK");
tcp_undo_cwnd_reduction(sk, false);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPDSACKUNDO);
return true;
}
return false;
}
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
/* Undo during loss recovery after partial ACK or using F-RTO. */
static bool tcp_try_undo_loss(struct sock *sk, bool frto_undo)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (frto_undo || tcp_may_undo(tp)) {
tcp_undo_cwnd_reduction(sk, true);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
DBGUNDO(sk, "partial loss");
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPLOSSUNDO);
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (frto_undo)
NET_INC_STATS(sock_net(sk),
LINUX_MIB_TCPSPURIOUSRTOS);
inet_csk(sk)->icsk_retransmits = 0;
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (frto_undo || tcp_is_sack(tp))
tcp_set_ca_state(sk, TCP_CA_Open);
return true;
}
return false;
}
/* The cwnd reduction in CWR and Recovery uses the PRR algorithm in RFC 6937.
* It computes the number of packets to send (sndcnt) based on packets newly
* delivered:
* 1) If the packets in flight is larger than ssthresh, PRR spreads the
* cwnd reductions across a full RTT.
* 2) Otherwise PRR uses packet conservation to send as much as delivered.
* But when the retransmits are acked without further losses, PRR
* slow starts cwnd up to ssthresh to speed up the recovery.
*/
static void tcp_init_cwnd_reduction(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
tp->high_seq = tp->snd_nxt;
tp->tlp_high_seq = 0;
tp->snd_cwnd_cnt = 0;
tp->prior_cwnd = tp->snd_cwnd;
tp->prr_delivered = 0;
tp->prr_out = 0;
tp->snd_ssthresh = inet_csk(sk)->icsk_ca_ops->ssthresh(sk);
tcp_ecn_queue_cwr(tp);
}
static void tcp_cwnd_reduction(struct sock *sk, int newly_acked_sacked,
int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
int sndcnt = 0;
int delta = tp->snd_ssthresh - tcp_packets_in_flight(tp);
tcp: fix zero cwnd in tcp_cwnd_reduction Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 20:42:38 +00:00
if (newly_acked_sacked <= 0 || WARN_ON_ONCE(!tp->prior_cwnd))
return;
tp->prr_delivered += newly_acked_sacked;
if (delta < 0) {
u64 dividend = (u64)tp->snd_ssthresh * tp->prr_delivered +
tp->prior_cwnd - 1;
sndcnt = div_u64(dividend, tp->prior_cwnd) - tp->prr_out;
} else if ((flag & FLAG_RETRANS_DATA_ACKED) &&
!(flag & FLAG_LOST_RETRANS)) {
sndcnt = min_t(int, delta,
max_t(int, tp->prr_delivered - tp->prr_out,
newly_acked_sacked) + 1);
} else {
sndcnt = min(delta, newly_acked_sacked);
}
/* Force a fast retransmit upon entering fast recovery */
sndcnt = max(sndcnt, (tp->prr_out ? 0 : 1));
tp->snd_cwnd = tcp_packets_in_flight(tp) + sndcnt;
}
static inline void tcp_end_cwnd_reduction(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
Proportional Rate Reduction for TCP. This patch implements Proportional Rate Reduction (PRR) for TCP. PRR is an algorithm that determines TCP's sending rate in fast recovery. PRR avoids excessive window reductions and aims for the actual congestion window size at the end of recovery to be as close as possible to the window determined by the congestion control algorithm. PRR also improves accuracy of the amount of data sent during loss recovery. The patch implements the recommended flavor of PRR called PRR-SSRB (Proportional rate reduction with slow start reduction bound) and replaces the existing rate halving algorithm. PRR improves upon the existing Linux fast recovery under a number of conditions including: 1) burst losses where the losses implicitly reduce the amount of outstanding data (pipe) below the ssthresh value selected by the congestion control algorithm and, 2) losses near the end of short flows where application runs out of data to send. As an example, with the existing rate halving implementation a single loss event can cause a connection carrying short Web transactions to go into the slow start mode after the recovery. This is because during recovery Linux pulls the congestion window down to packets_in_flight+1 on every ACK. A short Web response often runs out of new data to send and its pipe reduces to zero by the end of recovery when all its packets are drained from the network. Subsequent HTTP responses using the same connection will have to slow start to raise cwnd to ssthresh. PRR on the other hand aims for the cwnd to be as close as possible to ssthresh by the end of recovery. A description of PRR and a discussion of its performance can be found at the following links: - IETF Draft: http://tools.ietf.org/html/draft-mathis-tcpm-proportional-rate-reduction-01 - IETF Slides: http://www.ietf.org/proceedings/80/slides/tcpm-6.pdf http://tools.ietf.org/agenda/81/slides/tcpm-2.pdf - Paper to appear in Internet Measurements Conference (IMC) 2011: Improving TCP Loss Recovery Nandita Dukkipati, Matt Mathis, Yuchung Cheng Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-21 20:21:57 +00:00
/* Reset cwnd to ssthresh in CWR or Recovery (unless it's undone) */
if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR ||
(tp->undo_marker && tp->snd_ssthresh < TCP_INFINITE_SSTHRESH)) {
tp->snd_cwnd = tp->snd_ssthresh;
tp->snd_cwnd_stamp = tcp_time_stamp;
}
tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR);
}
/* Enter CWR state. Disable cwnd undo since congestion is proven with ECN */
void tcp_enter_cwr(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
tp->prior_ssthresh = 0;
if (inet_csk(sk)->icsk_ca_state < TCP_CA_CWR) {
tp->undo_marker = 0;
tcp_init_cwnd_reduction(sk);
tcp_set_ca_state(sk, TCP_CA_CWR);
}
}
EXPORT_SYMBOL(tcp_enter_cwr);
tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 18:34:22 +00:00
static void tcp_try_keep_open(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
int state = TCP_CA_Open;
if (tcp_left_out(tp) || tcp_any_retrans_done(sk))
tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 18:34:22 +00:00
state = TCP_CA_Disorder;
if (inet_csk(sk)->icsk_ca_state != state) {
tcp_set_ca_state(sk, state);
tp->high_seq = tp->snd_nxt;
}
}
static void tcp_try_to_open(struct sock *sk, int flag)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
tcp_verify_left_out(tp);
tcp: refactor F-RTO The patch series refactor the F-RTO feature (RFC4138/5682). This is to simplify the loss recovery processing. Existing F-RTO was developed during the experimental stage (RFC4138) and has many experimental features. It takes a separate code path from the traditional timeout processing by overloading CA_Disorder instead of using CA_Loss state. This complicates CA_Disorder state handling because it's also used for handling dubious ACKs and undos. While the algorithm in the RFC does not change the congestion control, the implementation intercepts congestion control in various places (e.g., frto_cwnd in tcp_ack()). The new code implements newer F-RTO RFC5682 using CA_Loss processing path. F-RTO becomes a small extension in the timeout processing and interfaces with congestion control and Eifel undo modules. It lets congestion control (module) determines how many to send independently. F-RTO only chooses what to send in order to detect spurious retranmission. If timeout is found spurious it invokes existing Eifel undo algorithms like DSACK or TCP timestamp based detection. The first patch removes all F-RTO code except the sysctl_tcp_frto is left for the new implementation. Since CA_EVENT_FRTO is removed, TCP westwood now computes ssthresh on regular timeout CA_EVENT_LOSS event. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:32:58 +00:00
if (!tcp_any_retrans_done(sk))
tp->retrans_stamp = 0;
if (flag & FLAG_ECE)
tcp_enter_cwr(sk);
if (inet_csk(sk)->icsk_ca_state != TCP_CA_CWR) {
tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 18:34:22 +00:00
tcp_try_keep_open(sk);
}
}
static void tcp_mtup_probe_failed(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
icsk->icsk_mtup.search_high = icsk->icsk_mtup.probe_size - 1;
icsk->icsk_mtup.probe_size = 0;
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPMTUPFAIL);
}
static void tcp_mtup_probe_success(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
/* FIXME: breaks with very large cwnd */
tp->prior_ssthresh = tcp_current_ssthresh(sk);
tp->snd_cwnd = tp->snd_cwnd *
tcp_mss_to_mtu(sk, tp->mss_cache) /
icsk->icsk_mtup.probe_size;
tp->snd_cwnd_cnt = 0;
tp->snd_cwnd_stamp = tcp_time_stamp;
tp->snd_ssthresh = tcp_current_ssthresh(sk);
icsk->icsk_mtup.search_low = icsk->icsk_mtup.probe_size;
icsk->icsk_mtup.probe_size = 0;
tcp_sync_mss(sk, icsk->icsk_pmtu_cookie);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPMTUPSUCCESS);
}
/* Do a simple retransmit without using the backoff mechanisms in
* tcp_timer. This is used for path mtu discovery.
* The socket is already locked here.
*/
void tcp_simple_retransmit(struct sock *sk)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb;
unsigned int mss = tcp_current_mss(sk);
u32 prior_lost = tp->lost_out;
tcp_for_write_queue(skb, sk) {
if (skb == tcp_send_head(sk))
break;
if (tcp_skb_seglen(skb) > mss &&
!(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED)) {
if (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_RETRANS) {
TCP_SKB_CB(skb)->sacked &= ~TCPCB_SACKED_RETRANS;
tp->retrans_out -= tcp_skb_pcount(skb);
}
tcp_skb_mark_lost_uncond_verify(tp, skb);
}
}
tcp_clear_retrans_hints_partial(tp);
if (prior_lost == tp->lost_out)
return;
if (tcp_is_reno(tp))
tcp_limit_reno_sacked(tp);
tcp_verify_left_out(tp);
/* Don't muck with the congestion window here.
* Reason is that we do not increase amount of _data_
* in network, but units changed and effective
* cwnd/ssthresh really reduced now.
*/
if (icsk->icsk_ca_state != TCP_CA_Loss) {
tp->high_seq = tp->snd_nxt;
tp->snd_ssthresh = tcp_current_ssthresh(sk);
tp->prior_ssthresh = 0;
tp->undo_marker = 0;
tcp_set_ca_state(sk, TCP_CA_Loss);
}
tcp_xmit_retransmit_queue(sk);
}
EXPORT_SYMBOL(tcp_simple_retransmit);
static void tcp_enter_recovery(struct sock *sk, bool ece_ack)
{
struct tcp_sock *tp = tcp_sk(sk);
int mib_idx;
if (tcp_is_reno(tp))
mib_idx = LINUX_MIB_TCPRENORECOVERY;
else
mib_idx = LINUX_MIB_TCPSACKRECOVERY;
NET_INC_STATS(sock_net(sk), mib_idx);
tp->prior_ssthresh = 0;
tcp_init_undo(tp);
if (!tcp_in_cwnd_reduction(sk)) {
if (!ece_ack)
tp->prior_ssthresh = tcp_current_ssthresh(sk);
tcp_init_cwnd_reduction(sk);
}
tcp_set_ca_state(sk, TCP_CA_Recovery);
}
/* Process an ACK in CA_Loss state. Move to CA_Open if lost data are
* recovered or spurious. Otherwise retransmits more on partial ACKs.
*/
static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack,
int *rexmit)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
bool recovered = !before(tp->snd_una, tp->high_seq);
if ((flag & FLAG_SND_UNA_ADVANCED) &&
tcp_try_undo_loss(sk, false))
return;
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (tp->frto) { /* F-RTO RFC5682 sec 3.1 (sack enhanced version). */
/* Step 3.b. A timeout is spurious if not all data are
* lost, i.e., never-retransmitted data are (s)acked.
*/
if ((flag & FLAG_ORIG_SACK_ACKED) &&
tcp_try_undo_loss(sk, true))
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
return;
if (after(tp->snd_nxt, tp->high_seq)) {
if (flag & FLAG_DATA_SACKED || is_dupack)
tp->frto = 0; /* Step 3.a. loss was real */
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
} else if (flag & FLAG_SND_UNA_ADVANCED && !recovered) {
tp->high_seq = tp->snd_nxt;
/* Step 2.b. Try send new data (but deferred until cwnd
* is updated in tcp_ack()). Otherwise fall back to
* the conventional recovery.
*/
if (tcp_send_head(sk) &&
after(tcp_wnd_end(tp), tp->snd_nxt)) {
*rexmit = REXMIT_NEW;
return;
}
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
tp->frto = 0;
}
}
if (recovered) {
/* F-RTO RFC5682 sec 3.1 step 2.a and 1st part of step 3.a */
tcp_try_undo_recovery(sk);
return;
}
tcp: implement RFC5682 F-RTO This patch implements F-RTO (foward RTO recovery): When the first retransmission after timeout is acknowledged, F-RTO sends new data instead of old data. If the next ACK acknowledges some never-retransmitted data, then the timeout was spurious and the congestion state is reverted. Otherwise if the next ACK selectively acknowledges the new data, then the timeout was genuine and the loss recovery continues. This idea applies to recurring timeouts as well. While F-RTO sends different data during timeout recovery, it does not (and should not) change the congestion control. The implementaion follows the three steps of SACK enhanced algorithm (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and 3 are in tcp_process_loss(). The basic version is not supported because SACK enhanced version also works for non-SACK connections. The new implementation is functionally in parity with the old F-RTO implementation except the one case where it increases undo events: In addition to the RFC algorithm, a spurious timeout may be detected without sending data in step 2, as long as the SACK confirms not all the original data are dropped. When this happens, the sender will undo the cwnd and perhaps enter fast recovery instead. This additional check increases the F-RTO undo events by 5x compared to the prior implementation on Google Web servers, since the sender often does not have new data to send for HTTP. Note F-RTO may detect spurious timeout before Eifel with timestamps does so. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:33:00 +00:00
if (tcp_is_reno(tp)) {
/* A Reno DUPACK means new data in F-RTO step 2.b above are
* delivered. Lower inflight to clock out (re)tranmissions.
*/
if (after(tp->snd_nxt, tp->high_seq) && is_dupack)
tcp_add_reno_sack(sk);
else if (flag & FLAG_SND_UNA_ADVANCED)
tcp_reset_reno_sack(tp);
}
*rexmit = REXMIT_LOST;
}
/* Undo during fast recovery after partial ACK. */
static bool tcp_try_undo_partial(struct sock *sk, const int acked)
{
struct tcp_sock *tp = tcp_sk(sk);
if (tp->undo_marker && tcp_packet_delayed(tp)) {
/* Plain luck! Hole if filled with delayed
* packet, rather than with a retransmit.
*/
tcp_update_reordering(sk, tcp_fackets_out(tp) + acked, 1);
/* We are getting evidence that the reordering degree is higher
* than we realized. If there are no retransmits out then we
* can undo. Otherwise we clock out new packets but do not
* mark more packets lost or retransmit more.
*/
if (tp->retrans_out)
return true;
if (!tcp_any_retrans_done(sk))
tp->retrans_stamp = 0;
DBGUNDO(sk, "partial recovery");
tcp_undo_cwnd_reduction(sk, true);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPPARTIALUNDO);
tcp_try_keep_open(sk);
return true;
}
return false;
}
/* Process an event, which can update packets-in-flight not trivially.
* Main goal of this function is to calculate new estimate for left_out,
* taking into account both packets sitting in receiver's buffer and
* packets lost by network.
*
* Besides that it updates the congestion state when packet loss or ECN
* is detected. But it does not reduce the cwnd, it is done by the
* congestion control later.
*
* It does _not_ decide what to send, it is made in function
* tcp_xmit_retransmit_queue().
*/
static void tcp_fastretrans_alert(struct sock *sk, const int acked,
bool is_dupack, int *ack_flag, int *rexmit)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
int fast_rexmit = 0, flag = *ack_flag;
bool do_lost = is_dupack || ((flag & FLAG_DATA_SACKED) &&
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
(tcp_fackets_out(tp) > tp->reordering));
if (WARN_ON(!tp->packets_out && tp->sacked_out))
tp->sacked_out = 0;
if (WARN_ON(!tp->sacked_out && tp->fackets_out))
tp->fackets_out = 0;
/* Now state machine starts.
* A. ECE, hence prohibit cwnd undoing, the reduction is required. */
if (flag & FLAG_ECE)
tp->prior_ssthresh = 0;
/* B. In all the states check for reneging SACKs. */
if (tcp_check_sack_reneging(sk, flag))
return;
/* C. Check consistency of the current state. */
tcp_verify_left_out(tp);
/* D. Check state exit conditions. State can be terminated
* when high_seq is ACKed. */
if (icsk->icsk_ca_state == TCP_CA_Open) {
WARN_ON(tp->retrans_out != 0);
tp->retrans_stamp = 0;
} else if (!before(tp->snd_una, tp->high_seq)) {
switch (icsk->icsk_ca_state) {
case TCP_CA_CWR:
/* CWR is to be held something *above* high_seq
* is ACKed for CWR bit to reach receiver. */
if (tp->snd_una != tp->high_seq) {
tcp_end_cwnd_reduction(sk);
tcp_set_ca_state(sk, TCP_CA_Open);
}
break;
case TCP_CA_Recovery:
if (tcp_is_reno(tp))
tcp_reset_reno_sack(tp);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
if (tcp_try_undo_recovery(sk))
return;
tcp_end_cwnd_reduction(sk);
break;
}
}
/* Use RACK to detect loss */
if (sysctl_tcp_recovery & TCP_RACK_LOST_RETRANS &&
tcp_rack_mark_lost(sk)) {
flag |= FLAG_LOST_RETRANS;
*ack_flag |= FLAG_LOST_RETRANS;
}
/* E. Process state. */
switch (icsk->icsk_ca_state) {
case TCP_CA_Recovery:
if (!(flag & FLAG_SND_UNA_ADVANCED)) {
if (tcp_is_reno(tp) && is_dupack)
tcp_add_reno_sack(sk);
} else {
if (tcp_try_undo_partial(sk, acked))
return;
/* Partial ACK arrived. Force fast retransmit. */
do_lost = tcp_is_reno(tp) ||
tcp_fackets_out(tp) > tp->reordering;
}
if (tcp_try_undo_dsack(sk)) {
tcp_try_keep_open(sk);
return;
}
break;
case TCP_CA_Loss:
tcp_process_loss(sk, flag, is_dupack, rexmit);
if (icsk->icsk_ca_state != TCP_CA_Open &&
!(flag & FLAG_LOST_RETRANS))
return;
/* Change state if cwnd is undone or retransmits are lost */
default:
if (tcp_is_reno(tp)) {
if (flag & FLAG_SND_UNA_ADVANCED)
tcp_reset_reno_sack(tp);
if (is_dupack)
tcp_add_reno_sack(sk);
}
if (icsk->icsk_ca_state <= TCP_CA_Disorder)
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_try_undo_dsack(sk);
if (!tcp_time_to_recover(sk, flag)) {
tcp_try_to_open(sk, flag);
return;
}
/* MTU probe failure: don't reduce cwnd */
if (icsk->icsk_ca_state < TCP_CA_CWR &&
icsk->icsk_mtup.probe_size &&
tp->snd_una == tp->mtu_probe.probe_seq_start) {
tcp_mtup_probe_failed(sk);
/* Restores the reduction we did in tcp_mtup_probe() */
tp->snd_cwnd++;
tcp_simple_retransmit(sk);
return;
}
/* Otherwise enter Recovery state */
tcp_enter_recovery(sk, (flag & FLAG_ECE));
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
fast_rexmit = 1;
}
tcp: remove bad timeout logic in fast recovery tcp_timeout_skb() was intended to trigger fast recovery on timeout, unfortunately in reality it often causes spurious retransmission storms during fast recovery. The particular sign is a fast retransmit over the highest sacked sequence (SND.FACK). Currently the RTO timer re-arming (as in RFC6298) offers a nice cushion to avoid spurious timeout: when SND.UNA advances the sender re-arms RTO and extends the timeout by icsk_rto. The sender does not offset the time elapsed since the packet at SND.UNA was sent. But if the next (DUP)ACK arrives later than ~RTTVAR and triggers tcp_fastretrans_alert(), then tcp_timeout_skb() will mark any packet sent before the icsk_rto interval lost, including one that's above the highest sacked sequence. Most likely a large part of scorebard will be marked. If most packets are not lost then the subsequent DUPACKs with new SACK blocks will cause the sender to continue to retransmit packets beyond SND.FACK spuriously. Even if only one packet is lost the sender may falsely retransmit almost the entire window. The situation becomes common in the world of bufferbloat: the RTT continues to grow as the queue builds up but RTTVAR remains small and close to the minimum 200ms. If a data packet is lost and the DUPACK triggered by the next data packet is slightly delayed, then a spurious retransmission storm forms. As the original comment on tcp_timeout_skb() suggests: the usefulness of this feature is questionable. It also wastes cycles walking the sack scoreboard and is actually harmful because of false recovery. It's time to remove this. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17 13:45:05 +00:00
if (do_lost)
[TCP]: non-FACK SACK follows conservative SACK loss recovery Many assumptions that are true when no reordering or other strange events happen are not a part of the RFC3517. FACK implementation is based on such assumptions. Previously (before the rewrite) the non-FACK SACK was basically doing fast rexmit and then it times out all skbs when first cumulative ACK arrives, which cannot really be called SACK based recovery :-). RFC3517 SACK disables these things: - Per SKB timeouts & head timeout entry to recovery - Marking at least one skb while in recovery (RFC3517 does this only for the fast retransmission but not for the other skbs when cumulative ACKs arrive in the recovery) - Sacktag's loss detection flavors B and C (see comment before tcp_sacktag_write_queue) This does not implement the "last resort" rule 3 of NextSeg, which allows retransmissions also when not enough SACK blocks have yet arrived above a segment for IsLost to return true [RFC3517]. The implementation differs from RFC3517 in these points: - Rate-halving is used instead of FlightSize / 2 - Instead of using dupACKs to trigger the recovery, the number of SACK blocks is used as FACK does with SACK blocks+holes (which provides more accurate number). It seems that the difference can affect negatively only if the receiver does not generate SACK blocks at all even though it claimed to be SACK-capable. - Dupthresh is not a constant one. Dynamical adjustments include both holes and sacked segments (equal to what FACK has) due to complexity involved in determining the number sacked blocks between highest_sack and the reordered segment. Thus it's will be an over-estimate. Implementation note: tcp_clean_rtx_queue doesn't need a lost_cnt tweak because head skb at that point cannot be SACKED_ACKED (nor would such situation last for long enough to cause problems). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:39:31 +00:00
tcp_update_scoreboard(sk, fast_rexmit);
*rexmit = REXMIT_LOST;
}
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
/* Kathleen Nichols' algorithm for tracking the minimum value of
* a data stream over some fixed time interval. (E.g., the minimum
* RTT over the past five minutes.) It uses constant space and constant
* time per update yet almost always delivers the same minimum as an
* implementation that has to keep all the data in the window.
*
* The algorithm keeps track of the best, 2nd best & 3rd best min
* values, maintaining an invariant that the measurement time of the
* n'th best >= n-1'th best. It also makes sure that the three values
* are widely separated in the time window since that bounds the worse
* case error when that data is monotonically increasing over the window.
*
* Upon getting a new min, we can forget everything earlier because it
* has no value - the new min is <= everything else in the window by
* definition and it's the most recent. So we restart fresh on every new min
* and overwrites 2nd & 3rd choices. The same property holds for 2nd & 3rd
* best.
*/
static void tcp_update_rtt_min(struct sock *sk, u32 rtt_us)
{
const u32 now = tcp_time_stamp, wlen = sysctl_tcp_min_rtt_wlen * HZ;
struct rtt_meas *m = tcp_sk(sk)->rtt_min;
struct rtt_meas rttm = {
.rtt = likely(rtt_us) ? rtt_us : jiffies_to_usecs(1),
.ts = now,
};
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
u32 elapsed;
/* Check if the new measurement updates the 1st, 2nd, or 3rd choices */
if (unlikely(rttm.rtt <= m[0].rtt))
m[0] = m[1] = m[2] = rttm;
else if (rttm.rtt <= m[1].rtt)
m[1] = m[2] = rttm;
else if (rttm.rtt <= m[2].rtt)
m[2] = rttm;
elapsed = now - m[0].ts;
if (unlikely(elapsed > wlen)) {
/* Passed entire window without a new min so make 2nd choice
* the new min & 3rd choice the new 2nd. So forth and so on.
*/
m[0] = m[1];
m[1] = m[2];
m[2] = rttm;
if (now - m[0].ts > wlen) {
m[0] = m[1];
m[1] = rttm;
if (now - m[0].ts > wlen)
m[0] = rttm;
}
} else if (m[1].ts == m[0].ts && elapsed > wlen / 4) {
/* Passed a quarter of the window without a new min so
* take 2nd choice from the 2nd quarter of the window.
*/
m[2] = m[1] = rttm;
} else if (m[2].ts == m[1].ts && elapsed > wlen / 2) {
/* Passed half the window without a new min so take the 3rd
* choice from the last half of the window.
*/
m[2] = rttm;
}
}
static inline bool tcp_ack_update_rtt(struct sock *sk, const int flag,
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
long seq_rtt_us, long sack_rtt_us,
long ca_rtt_us)
{
const struct tcp_sock *tp = tcp_sk(sk);
/* Prefer RTT measured from ACK's timing to TS-ECR. This is because
* broken middle-boxes or peers may corrupt TS-ECR fields. But
* Karn's algorithm forbids taking RTT if some retransmitted data
* is acked (RFC6298).
*/
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
if (seq_rtt_us < 0)
seq_rtt_us = sack_rtt_us;
/* RTTM Rule: A TSecr value received in a segment is used to
* update the averaged RTT measurement only if the segment
* acknowledges some new data, i.e., only if it advances the
* left edge of the send window.
* See draft-ietf-tcplw-high-performance-00, section 3.3.
*/
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
if (seq_rtt_us < 0 && tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr &&
flag & FLAG_ACKED)
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
seq_rtt_us = ca_rtt_us = jiffies_to_usecs(tcp_time_stamp -
tp->rx_opt.rcv_tsecr);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
if (seq_rtt_us < 0)
return false;
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
/* ca_rtt_us >= 0 is counting on the invariant that ca_rtt_us is
* always taken together with ACK, SACK, or TS-opts. Any negative
* values will be skipped with the seq_rtt_us < 0 check above.
*/
tcp_update_rtt_min(sk, ca_rtt_us);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
tcp_rtt_estimator(sk, seq_rtt_us);
tcp_set_rto(sk);
/* RFC6298: only reset backoff on valid RTT measurement. */
inet_csk(sk)->icsk_backoff = 0;
return true;
}
/* Compute time elapsed between (last) SYNACK and the ACK completing 3WHS. */
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req)
{
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
long rtt_us = -1L;
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
if (req && !req->num_retrans && tcp_rsk(req)->snt_synack.v64) {
struct skb_mstamp now;
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
skb_mstamp_get(&now);
rtt_us = skb_mstamp_us_delta(&now, &tcp_rsk(req)->snt_synack);
}
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
tcp_ack_update_rtt(sk, FLAG_SYN_ACKED, rtt_us, -1L, rtt_us);
}
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
static void tcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
icsk->icsk_ca_ops->cong_avoid(sk, ack, acked);
tcp_sk(sk)->snd_cwnd_stamp = tcp_time_stamp;
}
/* Restart timer after forward progress on connection.
* RFC2988 recommends to restart timer to now+rto.
*/
void tcp_rearm_rto(struct sock *sk)
{
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
const struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
/* If the retrans timer is currently being used by Fast Open
* for SYN-ACK retrans purpose, stay put.
*/
if (tp->fastopen_rsk)
return;
if (!tp->packets_out) {
inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
} else {
u32 rto = inet_csk(sk)->icsk_rto;
/* Offset the time elapsed after installing regular RTO */
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
if (icsk->icsk_pending == ICSK_TIME_EARLY_RETRANS ||
icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) {
struct sk_buff *skb = tcp_write_queue_head(sk);
const u32 rto_time_stamp =
tcp_skb_timestamp(skb) + rto;
s32 delta = (s32)(rto_time_stamp - tcp_time_stamp);
/* delta may not be positive if the socket is locked
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
* when the retrans timer fires and is rescheduled.
*/
if (delta > 0)
rto = delta;
}
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, rto,
TCP_RTO_MAX);
}
}
/* This function is called when the delayed ER timer fires. TCP enters
* fast recovery and performs fast-retransmit.
*/
void tcp_resume_early_retransmit(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp_rearm_rto(sk);
/* Stop if ER is disabled after the delayed ER timer is scheduled */
if (!tp->do_early_retrans)
return;
tcp_enter_recovery(sk, false);
tcp_update_scoreboard(sk, 1);
tcp_xmit_retransmit_queue(sk);
}
/* If we get here, the whole TSO packet has not been acked. */
static u32 tcp_tso_acked(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
u32 packets_acked;
BUG_ON(!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una));
packets_acked = tcp_skb_pcount(skb);
if (tcp_trim_head(sk, skb, tp->snd_una - TCP_SKB_CB(skb)->seq))
return 0;
packets_acked -= tcp_skb_pcount(skb);
if (packets_acked) {
BUG_ON(tcp_skb_pcount(skb) == 0);
BUG_ON(!before(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq));
}
return packets_acked;
}
static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb,
u32 prior_snd_una)
{
const struct skb_shared_info *shinfo;
/* Avoid cache line misses to get skb_shinfo() and shinfo->tx_flags */
if (likely(!TCP_SKB_CB(skb)->txstamp_ack))
return;
shinfo = skb_shinfo(skb);
if (!before(shinfo->tskey, prior_snd_una) &&
tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received, it could incorrectly think that a skb has already been acked and queue a SCM_TSTAMP_ACK cmsg to the sk->sk_error_queue. In tcp_ack_tstamp(), it checks 'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'. If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill script, between() returns true but the tskey is actually not acked. e.g. try between(3, 2, 1). The fix is to replace between() with one before() and one !before(). By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be removed. A packetdrill script is used to reproduce the dup ack scenario. Due to the lacking cmsg support in packetdrill (may be I cannot find it), a BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. Both the packetdrill and the bcc BPF script is attached at the end of this commit message. BPF Output Before Fix: ~~~~~~ <...>-2056 [001] d.s. 433.927987: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.929563: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.930765: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 434.028177: : ee_data:1459 packetdrill-2056 [001] d.s. 434.029686: : ee_data:14599 BPF Output After Fix: ~~~~~~ <...>-2049 [000] d.s. 113.517039: : ee_data:1459 <...>-2049 [000] d.s. 113.517253: : ee_data:14599 BCC BPF Script: ~~~~~~ #!/usr/bin/env python from __future__ import print_function from bcc import BPF bpf_text = """ #include <uapi/linux/ptrace.h> #include <net/sock.h> #include <bcc/proto.h> #include <linux/errqueue.h> #ifdef memset #undef memset #endif int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 1460) = 1460 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil.kdev@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18 22:39:53 +00:00
before(shinfo->tskey, tcp_sk(sk)->snd_una))
__skb_tstamp_tx(skb, NULL, sk, SCM_TSTAMP_ACK);
}
/* Remove acknowledged frames from the retransmission queue. If our packet
* is before the ack sequence we can discard it as it's confirmed to have
* arrived at the other end.
*/
static int tcp_clean_rtx_queue(struct sock *sk, int prior_fackets,
u32 prior_snd_una, int *acked,
struct tcp_sacktag_state *sack)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
struct skb_mstamp first_ackt, last_ackt, now;
struct tcp_sock *tp = tcp_sk(sk);
u32 prior_sacked = tp->sacked_out;
u32 reord = tp->packets_out;
bool fully_acked = true;
long sack_rtt_us = -1L;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
long seq_rtt_us = -1L;
long ca_rtt_us = -1L;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
struct sk_buff *skb;
u32 pkts_acked = 0;
bool rtt_update;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
int flag = 0;
first_ackt.v64 = 0;
while ((skb = tcp_write_queue_head(sk)) && skb != tcp_send_head(sk)) {
struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
u8 sacked = scb->sacked;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
u32 acked_pcount;
tcp_ack_tstamp(sk, skb, prior_snd_una);
[TCP]: use non-delayed ACK for congestion control RTT When a delayed ACK representing two packets arrives, there are two RTT samples available, one for each packet. The first (in order of seq number) will be artificially long due to the delay waiting for the second packet, the second will trigger the ACK and so will not itself be delayed. According to rfc1323, the SRTT used for RTO calculation should use the first rtt, so receivers echo the timestamp from the first packet in the delayed ack. For congestion control however, it seems measuring delayed ack delay is not desirable as it varies independently of congestion. The patch below causes seq_rtt and last_ackt to be updated with any available later packet rtts which should have less (and hopefully zero) delack delay. The rtt value then gets passed to ca_ops->pkts_acked(). Where TCP_CONG_RTT_STAMP was set, effort was made to supress RTTs from within a TSO chunk (!fully_acked), using only the final ACK (which includes any TSO delay) to generate RTTs. This patch removes these checks so RTTs are passed for each ACK to ca_ops->pkts_acked(). For non-delay based congestion control (cubic, h-tcp), rtt is sometimes used for rtt-scaling. In shortening the RTT, this may make them a little less aggressive. Delay-based schemes (eg vegas, veno, illinois) should get a cleaner, more accurate congestion signal, particularly for small cwnds. The congestion control module can potentially also filter out bad RTTs due to the delayed ack alarm by looking at the associated cnt which (where delayed acking is in use) should probably be 1 if the alarm went off or greater if the ACK was triggered by a packet. Signed-off-by: Gavin McCullagh <gavin.mccullagh@nuim.ie> Acked-by: Ilpo Jrvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-30 03:11:21 +00:00
/* Determine how many packets and what bytes were acked, tso and else */
if (after(scb->end_seq, tp->snd_una)) {
if (tcp_skb_pcount(skb) == 1 ||
!after(tp->snd_una, scb->seq))
break;
acked_pcount = tcp_tso_acked(sk, skb);
if (!acked_pcount)
break;
fully_acked = false;
} else {
/* Speedup tcp_unlink_write_queue() and next loop */
prefetchw(skb->next);
acked_pcount = tcp_skb_pcount(skb);
}
if (unlikely(sacked & TCPCB_RETRANS)) {
if (sacked & TCPCB_SACKED_RETRANS)
tp->retrans_out -= acked_pcount;
flag |= FLAG_RETRANS_DATA_ACKED;
} else if (!(sacked & TCPCB_SACKED_ACKED)) {
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
last_ackt = skb->skb_mstamp;
WARN_ON_ONCE(last_ackt.v64 == 0);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
if (!first_ackt.v64)
first_ackt = last_ackt;
reord = min(pkts_acked, reord);
if (!after(scb->end_seq, tp->high_seq))
flag |= FLAG_ORIG_SACK_ACKED;
}
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
if (sacked & TCPCB_SACKED_ACKED) {
tp->sacked_out -= acked_pcount;
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
} else if (tcp_is_sack(tp)) {
tp->delivered += acked_pcount;
if (!tcp_skb_spurious_retrans(tp, skb))
tcp_rack_advance(tp, &skb->skb_mstamp, sacked);
}
if (sacked & TCPCB_LOST)
tp->lost_out -= acked_pcount;
tp->packets_out -= acked_pcount;
pkts_acked += acked_pcount;
/* Initial outgoing SYN's get put onto the write_queue
* just like anything else we transmit. It is not
* true data, and if we misinform our callers that
* this ACK acks real data, we will erroneously exit
* connection startup slow start one packet too
* quickly. This is severely frowned upon behavior.
*/
if (likely(!(scb->tcp_flags & TCPHDR_SYN))) {
flag |= FLAG_DATA_ACKED;
} else {
flag |= FLAG_SYN_ACKED;
tp->retrans_stamp = 0;
}
if (!fully_acked)
break;
tcp_unlink_write_queue(skb, sk);
[NET] CORE: Introducing new memory accounting interface. This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 08:11:19 +00:00
sk_wmem_free_skb(sk, skb);
if (unlikely(skb == tp->retransmit_skb_hint))
tp->retransmit_skb_hint = NULL;
if (unlikely(skb == tp->lost_skb_hint))
tp->lost_skb_hint = NULL;
}
if (likely(between(tp->snd_up, prior_snd_una, tp->snd_una)))
tp->snd_up = tp->snd_una;
if (skb && (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))
flag |= FLAG_SACK_RENEGING;
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
skb_mstamp_get(&now);
if (likely(first_ackt.v64) && !(flag & FLAG_RETRANS_DATA_ACKED)) {
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
seq_rtt_us = skb_mstamp_us_delta(&now, &first_ackt);
ca_rtt_us = skb_mstamp_us_delta(&now, &last_ackt);
}
if (sack->first_sackt.v64) {
sack_rtt_us = skb_mstamp_us_delta(&now, &sack->first_sackt);
ca_rtt_us = skb_mstamp_us_delta(&now, &sack->last_sackt);
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
}
tcp: track min RTT using windowed min-filter Kathleen Nichols' algorithm for tracking the minimum RTT of a data stream over some measurement window. It uses constant space and constant time per update. Yet it almost always delivers the same minimum as an implementation that has to keep all the data in the window. The measurement window is tunable via sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes. The algorithm keeps track of the best, 2nd best & 3rd best min values, maintaining an invariant that the measurement time of the n'th best >= n-1'th best. It also makes sure that the three values are widely separated in the time window since that bounds the worse case error when that data is monotonically increasing over the window. Upon getting a new min, we can forget everything earlier because it has no value - the new min is less than everything else in the window by definition and it's the most recent. So we restart fresh on every new min and overwrites the 2nd & 3rd choices. The same property holds for the 2nd & 3rd best. Therefore we have to maintain two invariants to maximize the information in the samples, one on values (1st.v <= 2nd.v <= 3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <= now). These invariants determine the structure of the code The RTT input to the windowed filter is the minimum RTT measured from ACK or SACK, or as the last resort from TCP timestamps. The accessor tcp_min_rtt() returns the minimum RTT seen in the window. ~0U indicates it is not available. The minimum is 1usec even if the true RTT is below that. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17 04:57:42 +00:00
rtt_update = tcp_ack_update_rtt(sk, flag, seq_rtt_us, sack_rtt_us,
ca_rtt_us);
if (flag & FLAG_ACKED) {
tcp_rearm_rto(sk);
if (unlikely(icsk->icsk_mtup.probe_size &&
!after(tp->mtu_probe.probe_seq_end, tp->snd_una))) {
tcp_mtup_probe_success(sk);
}
if (tcp_is_reno(tp)) {
tcp_remove_reno_sacks(sk, pkts_acked);
} else {
int delta;
/* Non-retransmitted hole got filled? That's reordering */
if (reord < prior_fackets)
tcp_update_reordering(sk, tp->fackets_out - reord, 0);
delta = tcp_is_fack(tp) ? pkts_acked :
prior_sacked - tp->sacked_out;
tp->lost_cnt_hint -= min(tp->lost_cnt_hint, delta);
}
tp->fackets_out -= min(pkts_acked, tp->fackets_out);
[TCP]: Rewrite SACK block processing & sack_recv_cache use Key points of this patch are: - In case new SACK information is advance only type, no skb processing below previously discovered highest point is done - Optimize cases below highest point too since there's no need to always go up to highest point (which is very likely still present in that SACK), this is not entirely true though because I'm dropping the fastpath_skb_hint which could previously optimize those cases even better. Whether that's significant, I'm not too sure. Currently it will provide skipping by walking. Combined with RB-tree, all skipping would become fast too regardless of window size (can be done incrementally later). Previously a number of cases in TCP SACK processing fails to take advantage of costly stored information in sack_recv_cache, most importantly, expected events such as cumulative ACK and new hole ACKs. Processing on such ACKs result in rather long walks building up latencies (which easily gets nasty when window is huge). Those latencies are often completely unnecessary compared with the amount of _new_ information received, usually for cumulative ACK there's no new information at all, yet TCP walks whole queue unnecessary potentially taking a number of costly cache misses on the way, etc.! Since the inclusion of highest_sack, there's a lot information that is very likely redundant (SACK fastpath hint stuff, fackets_out, highest_sack), though there's no ultimate guarantee that they'll remain the same whole the time (in all unearthly scenarios). Take advantage of this knowledge here and drop fastpath hint and use direct access to highest SACKed skb as a replacement. Effectively "special cased" fastpath is dropped. This change adds some complexity to introduce better coveraged "fastpath", though the added complexity should make TCP behave more cache friendly. The current ACK's SACK blocks are compared against each cached block individially and only ranges that are new are then scanned by the high constant walk. For other parts of write queue, even when in previously known part of the SACK blocks, a faster skip function is used (if necessary at all). In addition, whenever possible, TCP fast-forwards to highest_sack skb that was made available by an earlier patch. In typical case, no other things but this fast-forward and mandatory markings after that occur making the access pattern quite similar to the former fastpath "special case". DSACKs are special case that must always be walked. The local to recv_sack_cache copying could be more intelligent w.r.t DSACKs which are likely to be there only once but that is left to a separate patch. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 03:50:37 +00:00
tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 22:02:48 +00:00
} else if (skb && rtt_update && sack_rtt_us >= 0 &&
sack_rtt_us > skb_mstamp_us_delta(&now, &skb->skb_mstamp)) {
/* Do not re-arm RTO if the sack RTT is measured from data sent
* after when the head was last (re)transmitted. Otherwise the
* timeout may continue to extend in loss recovery.
*/
tcp_rearm_rto(sk);
}
if (icsk->icsk_ca_ops->pkts_acked) {
struct ack_sample sample = { .pkts_acked = pkts_acked,
.rtt_us = ca_rtt_us };
icsk->icsk_ca_ops->pkts_acked(sk, &sample);
}
#if FASTRETRANS_DEBUG > 0
WARN_ON((int)tp->sacked_out < 0);
WARN_ON((int)tp->lost_out < 0);
WARN_ON((int)tp->retrans_out < 0);
if (!tp->packets_out && tcp_is_sack(tp)) {
icsk = inet_csk(sk);
if (tp->lost_out) {
pr_debug("Leak l=%u %d\n",
tp->lost_out, icsk->icsk_ca_state);
tp->lost_out = 0;
}
if (tp->sacked_out) {
pr_debug("Leak s=%u %d\n",
tp->sacked_out, icsk->icsk_ca_state);
tp->sacked_out = 0;
}
if (tp->retrans_out) {
pr_debug("Leak r=%u %d\n",
tp->retrans_out, icsk->icsk_ca_state);
tp->retrans_out = 0;
}
}
#endif
*acked = pkts_acked;
return flag;
}
static void tcp_ack_probe(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
/* Was it a usable window open? */
if (!after(TCP_SKB_CB(tcp_send_head(sk))->end_seq, tcp_wnd_end(tp))) {
icsk->icsk_backoff = 0;
inet_csk_clear_xmit_timer(sk, ICSK_TIME_PROBE0);
/* Socket must be waked up by subsequent tcp_data_snd_check().
* This function is not for random using!
*/
} else {
unsigned long when = tcp_probe0_when(sk, TCP_RTO_MAX);
inet_csk_reset_xmit_timer(sk, ICSK_TIME_PROBE0,
when, TCP_RTO_MAX);
}
}
static inline bool tcp_ack_is_dubious(const struct sock *sk, const int flag)
{
return !(flag & FLAG_NOT_DUP) || (flag & FLAG_CA_ALERT) ||
inet_csk(sk)->icsk_ca_state != TCP_CA_Open;
}
/* Decide wheather to run the increase function of congestion control. */
static inline bool tcp_may_raise_cwnd(const struct sock *sk, const int flag)
{
/* If reordering is high then always grow cwnd whenever data is
* delivered regardless of its ordering. Otherwise stay conservative
* and only grow cwnd on in-order delivery (RFC5681). A stretched ACK w/
* new SACK or ECE mark may first advance cwnd here and later reduce
* cwnd in tcp_fastretrans_alert() based on more states.
*/
if (tcp_sk(sk)->reordering > sock_net(sk)->ipv4.sysctl_tcp_reordering)
return flag & FLAG_FORWARD_PROGRESS;
return flag & FLAG_DATA_ACKED;
}
/* The "ultimate" congestion control function that aims to replace the rigid
* cwnd increase and decrease control (tcp_cong_avoid,tcp_*cwnd_reduction).
* It's called toward the end of processing an ACK with precise rate
* information. All transmission or retransmission are delayed afterwards.
*/
static void tcp_cong_control(struct sock *sk, u32 ack, u32 acked_sacked,
int flag)
{
if (tcp_in_cwnd_reduction(sk)) {
/* Reduce cwnd if state mandates */
tcp_cwnd_reduction(sk, acked_sacked, flag);
} else if (tcp_may_raise_cwnd(sk, flag)) {
/* Advance cwnd if state allows */
tcp_cong_avoid(sk, ack, acked_sacked);
}
tcp_update_pacing_rate(sk);
}
/* Check that window update is acceptable.
* The function assumes that snd_una<=ack<=snd_next.
*/
static inline bool tcp_may_update_window(const struct tcp_sock *tp,
const u32 ack, const u32 ack_seq,
const u32 nwin)
{
return after(ack, tp->snd_una) ||
after(ack_seq, tp->snd_wl1) ||
(ack_seq == tp->snd_wl1 && nwin > tp->snd_wnd);
}
/* If we update tp->snd_una, also update tp->bytes_acked */
static void tcp_snd_una_update(struct tcp_sock *tp, u32 ack)
{
u32 delta = ack - tp->snd_una;
sock_owned_by_me((struct sock *)tp);
u64_stats_update_begin_raw(&tp->syncp);
tp->bytes_acked += delta;
u64_stats_update_end_raw(&tp->syncp);
tp->snd_una = ack;
}
/* If we update tp->rcv_nxt, also update tp->bytes_received */
static void tcp_rcv_nxt_update(struct tcp_sock *tp, u32 seq)
{
u32 delta = seq - tp->rcv_nxt;
sock_owned_by_me((struct sock *)tp);
u64_stats_update_begin_raw(&tp->syncp);
tp->bytes_received += delta;
u64_stats_update_end_raw(&tp->syncp);
tp->rcv_nxt = seq;
}
/* Update our send window.
*
* Window update algorithm, described in RFC793/RFC1122 (used in linux-2.2
* and in FreeBSD. NetBSD's one is even worse.) is wrong.
*/
static int tcp_ack_update_window(struct sock *sk, const struct sk_buff *skb, u32 ack,
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
u32 ack_seq)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
struct tcp_sock *tp = tcp_sk(sk);
int flag = 0;
u32 nwin = ntohs(tcp_hdr(skb)->window);
if (likely(!tcp_hdr(skb)->syn))
nwin <<= tp->rx_opt.snd_wscale;
if (tcp_may_update_window(tp, ack, ack_seq, nwin)) {
flag |= FLAG_WIN_UPDATE;
tcp_update_wl(tp, ack_seq);
if (tp->snd_wnd != nwin) {
tp->snd_wnd = nwin;
/* Note, it is the only place, where
* fast path is recovered for sending TCP.
*/
[TCP]: Clear stale pred_flags when snd_wnd changes This bug is responsible for causing the infamous "Treason uncloaked" messages that's been popping up everywhere since the printk was added. It has usually been blamed on foreign operating systems. However, some of those reports implicate Linux as both systems are running Linux or the TCP connection is going across the loopback interface. In fact, there really is a bug in the Linux TCP header prediction code that's been there since at least 2.1.8. This bug was tracked down with help from Dale Blount. The effect of this bug ranges from harmless "Treason uncloaked" messages to hung/aborted TCP connections. The details of the bug and fix is as follows. When snd_wnd is updated, we only update pred_flags if tcp_fast_path_check succeeds. When it fails (for example, when our rcvbuf is used up), we will leave pred_flags with an out-of-date snd_wnd value. When the out-of-date pred_flags happens to match the next incoming packet we will again hit the fast path and use the current snd_wnd which will be wrong. In the case of the treason messages, it just happens that the snd_wnd cached in pred_flags is zero while tp->snd_wnd is non-zero. Therefore when a zero-window packet comes in we incorrectly conclude that the window is non-zero. In fact if the peer continues to send us zero-window pure ACKs we will continue making the same mistake. It's only when the peer transmits a zero-window packet with data attached that we get a chance to snap out of it. This is what triggers the treason message at the next retransmit timeout. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-27 08:47:46 +00:00
tp->pred_flags = 0;
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_fast_path_check(sk);
tcp: fix slow start after idle vs TSO/GSO slow start after idle might reduce cwnd, but we perform this after first packet was cooked and sent. With TSO/GSO, it means that we might send a full TSO packet even if cwnd should have been reduced to IW10. Moving the SSAI check in skb_entail() makes sense, because we slightly reduce number of times this check is done, especially for large send() and TCP Small queue callbacks from softirq context. As Neal pointed out, we also need to perform the check if/when receive window opens. Tested: Following packetdrill test demonstrates the problem // Test of slow start after idle `sysctl -q net.ipv4.tcp_slow_start_after_idle=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 65535 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.100 < . 1:1(0) ack 1 win 511 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_SNDBUF, [200000], 4) = 0 +0 write(4, ..., 26000) = 26000 +0 > . 1:5001(5000) ack 1 +0 > . 5001:10001(5000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% +.100 < . 1:1(0) ack 10001 win 511 +0 %{ assert tcpi_snd_cwnd == 20, tcpi_snd_cwnd }% +0 > . 10001:20001(10000) ack 1 +0 > P. 20001:26001(6000) ack 1 +.100 < . 1:1(0) ack 26001 win 511 +0 %{ assert tcpi_snd_cwnd == 36, tcpi_snd_cwnd }% +4 write(4, ..., 20000) = 20000 // If slow start after idle works properly, we should send 5 MSS here (cwnd/2) +0 > . 26001:31001(5000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% +0 > . 31001:36001(5000) ack 1 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21 19:30:00 +00:00
if (tcp_send_head(sk))
tcp_slow_start_after_idle_check(sk);
if (nwin > tp->max_window) {
tp->max_window = nwin;
tcp_sync_mss(sk, inet_csk(sk)->icsk_pmtu_cookie);
}
}
}
tcp_snd_una_update(tp, ack);
return flag;
}
/* Return true if we're currently rate-limiting out-of-window ACKs and
* thus shouldn't send a dupack right now. We rate-limit dupacks in
* response to out-of-window SYNs or ACKs to mitigate ACK loops or DoS
* attacks that send repeated SYNs or ACKs for the same connection. To
* do this, we do not send a duplicate SYNACK or ACK if the remote
* endpoint is sending out-of-window SYNs or pure ACKs at a high rate.
*/
bool tcp_oow_rate_limited(struct net *net, const struct sk_buff *skb,
int mib_idx, u32 *last_oow_ack_time)
{
/* Data packets without SYNs are not likely part of an ACK loop. */
if ((TCP_SKB_CB(skb)->seq != TCP_SKB_CB(skb)->end_seq) &&
!tcp_hdr(skb)->syn)
goto not_rate_limited;
if (*last_oow_ack_time) {
s32 elapsed = (s32)(tcp_time_stamp - *last_oow_ack_time);
if (0 <= elapsed && elapsed < sysctl_tcp_invalid_ratelimit) {
NET_INC_STATS(net, mib_idx);
return true; /* rate-limited: don't send yet! */
}
}
*last_oow_ack_time = tcp_time_stamp;
not_rate_limited:
return false; /* not rate-limited: go ahead, send dupack now! */
}
/* RFC 5961 7 [ACK Throttling] */
static void tcp_send_challenge_ack(struct sock *sk, const struct sk_buff *skb)
{
/* unprotected vars, we dont care of overwrites */
static u32 challenge_timestamp;
static unsigned int challenge_count;
struct tcp_sock *tp = tcp_sk(sk);
u32 now;
/* First check our per-socket dupack rate limit. */
if (tcp_oow_rate_limited(sock_net(sk), skb,
LINUX_MIB_TCPACKSKIPPEDCHALLENGE,
&tp->last_oow_ack_time))
return;
/* Then check the check host-wide RFC 5961 rate limit. */
now = jiffies / HZ;
if (now != challenge_timestamp) {
challenge_timestamp = now;
challenge_count = 0;
}
if (++challenge_count <= sysctl_tcp_challenge_ack_limit) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPCHALLENGEACK);
tcp_send_ack(sk);
}
}
static void tcp_store_ts_recent(struct tcp_sock *tp)
{
tp->rx_opt.ts_recent = tp->rx_opt.rcv_tsval;
tp->rx_opt.ts_recent_stamp = get_seconds();
}
static void tcp_replace_ts_recent(struct tcp_sock *tp, u32 seq)
{
if (tp->rx_opt.saw_tstamp && !after(seq, tp->rcv_wup)) {
/* PAWS bug workaround wrt. ACK frames, the PAWS discard
* extra check below makes sure this can only happen
* for pure ACK frames. -DaveM
*
* Not only, also it occurs for expired timestamps.
*/
if (tcp_paws_check(&tp->rx_opt, 0))
tcp_store_ts_recent(tp);
}
}
/* This routine deals with acks during a TLP episode.
tcp: avoid reducing cwnd when ACK+DSACK is received With TLP, the peer may reply to a probe with an ACK+D-SACK, with ack value set to tlp_high_seq. In the current code, such ACK+DSACK will be missed and only at next, higher ack will the TLP episode be considered done. Since the DSACK is not present anymore, this will cost a cwnd reduction. This patch ensures that this scenario does not cause a cwnd reduction, since receiving an ACK+DSACK indicates that both the initial segment and the probe have been received by the peer. The following packetdrill test, from Neal Cardwell, validates this patch: // Establish a connection. 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.020 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 1 packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1:1001(1000) ack 1 // Loss probe retransmission. // packets_out == 1 => schedule PTO in max(2*RTT, 1.5*RTT + 200ms) // In this case, this means: 1.5*RTT + 200ms = 230ms +.230 > P. 1:1001(1000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% // Receiver ACKs at tlp_high_seq with a DSACK, // indicating they received the original packet and probe. +.020 < . 1:1(0) ack 1001 win 257 <sack 1:1001,nop,nop> +0 %{ assert tcpi_snd_cwnd == 10 }% // Send another packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1001:2001(1000) ack 1 // Receiver ACKs above tlp_high_seq, which should end the TLP episode // if we haven't already. We should not reduce cwnd. +.020 < . 1:1(0) ack 2001 win 257 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% Credits: -Gregory helped in finding that tcp_process_tlp_ack was where the cwnd got reduced in our MPTCP tests. -Neal wrote the packetdrill test above -Yuchung reworked the patch to make it more readable. Cc: Gregory Detal <gregory.detal@uclouvain.be> Cc: Nandita Dukkipati <nanditad@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Sébastien Barré <sebastien.barre@uclouvain.be> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 09:30:40 +00:00
* We mark the end of a TLP episode on receiving TLP dupack or when
* ack is after tlp_high_seq.
* Ref: loss detection algorithm in draft-dukkipati-tcpm-tcp-loss-probe.
*/
static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp: avoid reducing cwnd when ACK+DSACK is received With TLP, the peer may reply to a probe with an ACK+D-SACK, with ack value set to tlp_high_seq. In the current code, such ACK+DSACK will be missed and only at next, higher ack will the TLP episode be considered done. Since the DSACK is not present anymore, this will cost a cwnd reduction. This patch ensures that this scenario does not cause a cwnd reduction, since receiving an ACK+DSACK indicates that both the initial segment and the probe have been received by the peer. The following packetdrill test, from Neal Cardwell, validates this patch: // Establish a connection. 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.020 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 1 packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1:1001(1000) ack 1 // Loss probe retransmission. // packets_out == 1 => schedule PTO in max(2*RTT, 1.5*RTT + 200ms) // In this case, this means: 1.5*RTT + 200ms = 230ms +.230 > P. 1:1001(1000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% // Receiver ACKs at tlp_high_seq with a DSACK, // indicating they received the original packet and probe. +.020 < . 1:1(0) ack 1001 win 257 <sack 1:1001,nop,nop> +0 %{ assert tcpi_snd_cwnd == 10 }% // Send another packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1001:2001(1000) ack 1 // Receiver ACKs above tlp_high_seq, which should end the TLP episode // if we haven't already. We should not reduce cwnd. +.020 < . 1:1(0) ack 2001 win 257 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% Credits: -Gregory helped in finding that tcp_process_tlp_ack was where the cwnd got reduced in our MPTCP tests. -Neal wrote the packetdrill test above -Yuchung reworked the patch to make it more readable. Cc: Gregory Detal <gregory.detal@uclouvain.be> Cc: Nandita Dukkipati <nanditad@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Sébastien Barré <sebastien.barre@uclouvain.be> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 09:30:40 +00:00
if (before(ack, tp->tlp_high_seq))
return;
tcp: avoid reducing cwnd when ACK+DSACK is received With TLP, the peer may reply to a probe with an ACK+D-SACK, with ack value set to tlp_high_seq. In the current code, such ACK+DSACK will be missed and only at next, higher ack will the TLP episode be considered done. Since the DSACK is not present anymore, this will cost a cwnd reduction. This patch ensures that this scenario does not cause a cwnd reduction, since receiving an ACK+DSACK indicates that both the initial segment and the probe have been received by the peer. The following packetdrill test, from Neal Cardwell, validates this patch: // Establish a connection. 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.020 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 1 packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1:1001(1000) ack 1 // Loss probe retransmission. // packets_out == 1 => schedule PTO in max(2*RTT, 1.5*RTT + 200ms) // In this case, this means: 1.5*RTT + 200ms = 230ms +.230 > P. 1:1001(1000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% // Receiver ACKs at tlp_high_seq with a DSACK, // indicating they received the original packet and probe. +.020 < . 1:1(0) ack 1001 win 257 <sack 1:1001,nop,nop> +0 %{ assert tcpi_snd_cwnd == 10 }% // Send another packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1001:2001(1000) ack 1 // Receiver ACKs above tlp_high_seq, which should end the TLP episode // if we haven't already. We should not reduce cwnd. +.020 < . 1:1(0) ack 2001 win 257 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% Credits: -Gregory helped in finding that tcp_process_tlp_ack was where the cwnd got reduced in our MPTCP tests. -Neal wrote the packetdrill test above -Yuchung reworked the patch to make it more readable. Cc: Gregory Detal <gregory.detal@uclouvain.be> Cc: Nandita Dukkipati <nanditad@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Sébastien Barré <sebastien.barre@uclouvain.be> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 09:30:40 +00:00
if (flag & FLAG_DSACKING_ACK) {
/* This DSACK means original and TLP probe arrived; no loss */
tp->tlp_high_seq = 0;
} else if (after(ack, tp->tlp_high_seq)) {
/* ACK advances: there was a loss, so reduce cwnd. Reset
* tlp_high_seq in tcp_init_cwnd_reduction()
*/
tcp_init_cwnd_reduction(sk);
tcp_set_ca_state(sk, TCP_CA_CWR);
tcp_end_cwnd_reduction(sk);
tcp_try_keep_open(sk);
NET_INC_STATS(sock_net(sk),
LINUX_MIB_TCPLOSSPROBERECOVERY);
tcp: avoid reducing cwnd when ACK+DSACK is received With TLP, the peer may reply to a probe with an ACK+D-SACK, with ack value set to tlp_high_seq. In the current code, such ACK+DSACK will be missed and only at next, higher ack will the TLP episode be considered done. Since the DSACK is not present anymore, this will cost a cwnd reduction. This patch ensures that this scenario does not cause a cwnd reduction, since receiving an ACK+DSACK indicates that both the initial segment and the probe have been received by the peer. The following packetdrill test, from Neal Cardwell, validates this patch: // Establish a connection. 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.020 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 1 packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1:1001(1000) ack 1 // Loss probe retransmission. // packets_out == 1 => schedule PTO in max(2*RTT, 1.5*RTT + 200ms) // In this case, this means: 1.5*RTT + 200ms = 230ms +.230 > P. 1:1001(1000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% // Receiver ACKs at tlp_high_seq with a DSACK, // indicating they received the original packet and probe. +.020 < . 1:1(0) ack 1001 win 257 <sack 1:1001,nop,nop> +0 %{ assert tcpi_snd_cwnd == 10 }% // Send another packet. +0 write(4, ..., 1000) = 1000 +0 > P. 1001:2001(1000) ack 1 // Receiver ACKs above tlp_high_seq, which should end the TLP episode // if we haven't already. We should not reduce cwnd. +.020 < . 1:1(0) ack 2001 win 257 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% Credits: -Gregory helped in finding that tcp_process_tlp_ack was where the cwnd got reduced in our MPTCP tests. -Neal wrote the packetdrill test above -Yuchung reworked the patch to make it more readable. Cc: Gregory Detal <gregory.detal@uclouvain.be> Cc: Nandita Dukkipati <nanditad@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Sébastien Barré <sebastien.barre@uclouvain.be> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 09:30:40 +00:00
} else if (!(flag & (FLAG_SND_UNA_ADVANCED |
FLAG_NOT_DUP | FLAG_DATA_SACKED))) {
/* Pure dupack: original and TLP probe arrived; no loss */
tp->tlp_high_seq = 0;
}
}
static inline void tcp_in_ack_event(struct sock *sk, u32 flags)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
if (icsk->icsk_ca_ops->in_ack_event)
icsk->icsk_ca_ops->in_ack_event(sk, flags);
}
/* Congestion control has updated the cwnd already. So if we're in
* loss recovery then now we do any new sends (for FRTO) or
* retransmits (for CA_Loss or CA_recovery) that make sense.
*/
static void tcp_xmit_recovery(struct sock *sk, int rexmit)
{
struct tcp_sock *tp = tcp_sk(sk);
if (rexmit == REXMIT_NONE)
return;
if (unlikely(rexmit == 2)) {
__tcp_push_pending_frames(sk, tcp_current_mss(sk),
TCP_NAGLE_OFF);
if (after(tp->snd_nxt, tp->high_seq))
return;
tp->frto = 0;
}
tcp_xmit_retransmit_queue(sk);
}
/* This routine deals with incoming acks, but not outgoing ones. */
static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_sacktag_state sack_state;
u32 prior_snd_una = tp->snd_una;
u32 ack_seq = TCP_SKB_CB(skb)->seq;
u32 ack = TCP_SKB_CB(skb)->ack_seq;
bool is_dupack = false;
u32 prior_fackets;
int prior_packets = tp->packets_out;
tcp: new delivery accounting This patch changes the accounting of how many packets are newly acked or sacked when the sender receives an ACK. The current approach basically computes newly_acked_sacked = (prior_packets - prior_sacked) - (tp->packets_out - tp->sacked_out) where prior_packets and prior_sacked out are snapshot at the beginning of the ACK processing. The new approach tracks the delivery information via a new TCP state variable "delivered" which monotically increases as new packets are delivered in order or out-of-order. The reason for this change is that the current approach is brittle that produces negative or inaccurate estimate. 1) For non-SACK connections, an ACK that advances the SND.UNA could reset the DUPACK counters (tp->sacked_out) in tcp_process_loss() or tcp_fastretrans_alert(). This inflates the inflight suddenly and causes under-estimate or even negative estimate. Here is a real example: before after (processing ACK) packets_out 75 73 sacked_out 23 0 ca state Loss Open The old approach computes (75-23) - (73 - 0) = -21 delivered while the new approach computes 1 delivered since it considers the 2nd-24th packets are delivered OOO. 2) MSS change would re-count packets_out and sacked_out so the estimate is in-accurate and can even become negative. E.g., the inflight is doubled when MSS is halved. 3) Spurious retransmission signaled by DSACK is not accounted The new approach is simpler and more robust. For SACK connections, tp->delivered increments as packets are being acked or sacked in SACK and ACK processing. For non-sack connections, it's done in tcp_remove_reno_sacks() and tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered is incremented by the number of packets ACKed (less the current number of DUPACKs received plus one packet hole). Upon receiving a DUPACK, tp->delivered is incremented assuming one out-of-order packet is delivered. Upon receiving a DSACK, tp->delivered is incremtened assuming one retransmission is delivered in tcp_sacktag_write_queue(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:33:06 +00:00
u32 prior_delivered = tp->delivered;
int acked = 0; /* Number of packets newly acked */
int rexmit = REXMIT_NONE; /* Flag to (re)transmit to recover losses */
sack_state.first_sackt.v64 = 0;
/* We very likely will need to access write queue head. */
prefetchw(sk->sk_write_queue.next);
/* If the ack is older than previous acks
* then we can probably ignore it.
*/
if (before(ack, prior_snd_una)) {
/* RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] */
if (before(ack, prior_snd_una - tp->max_window)) {
tcp_send_challenge_ack(sk, skb);
return -1;
}
goto old_ack;
}
/* If the ack includes data we haven't sent yet, discard
* this segment (RFC793 Section 3.9).
*/
if (after(ack, tp->snd_nxt))
goto invalid_ack;
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
if (icsk->icsk_pending == ICSK_TIME_EARLY_RETRANS ||
icsk->icsk_pending == ICSK_TIME_LOSS_PROBE)
tcp_rearm_rto(sk);
tcp: fix ssthresh and undo for consecutive short FRTO episodes Fix TCP FRTO logic so that it always notices when snd_una advances, indicating that any RTO after that point will be a new and distinct loss episode. Previously there was a very specific sequence that could cause FRTO to fail to notice a new loss episode had started: (1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue (2) receiver ACKs packet 1 (3) FRTO sends 2 more packets (4) RTO timer fires again (should start a new loss episode) The problem was in step (3) above, where tcp_process_loss() returned early (in the spot marked "Step 2.b"), so that it never got to the logic to clear icsk_retransmits. Thus icsk_retransmits stayed non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero icsk_retransmits, decide that this RTO is not a new episode, and decide not to cut ssthresh and remember the current cwnd and ssthresh for undo. There were two main consequences to the bug that we have observed. First, ssthresh was not decreased in step (4). Second, when there was a series of such FRTO (1-4) sequences that happened to be followed by an FRTO undo, we would restore the cwnd and ssthresh from before the entire series started (instead of the cwnd and ssthresh from before the most recent RTO). This could result in cwnd and ssthresh being restored to values much bigger than the proper values. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 20:13:07 +00:00
if (after(ack, prior_snd_una)) {
flag |= FLAG_SND_UNA_ADVANCED;
tcp: fix ssthresh and undo for consecutive short FRTO episodes Fix TCP FRTO logic so that it always notices when snd_una advances, indicating that any RTO after that point will be a new and distinct loss episode. Previously there was a very specific sequence that could cause FRTO to fail to notice a new loss episode had started: (1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue (2) receiver ACKs packet 1 (3) FRTO sends 2 more packets (4) RTO timer fires again (should start a new loss episode) The problem was in step (3) above, where tcp_process_loss() returned early (in the spot marked "Step 2.b"), so that it never got to the logic to clear icsk_retransmits. Thus icsk_retransmits stayed non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero icsk_retransmits, decide that this RTO is not a new episode, and decide not to cut ssthresh and remember the current cwnd and ssthresh for undo. There were two main consequences to the bug that we have observed. First, ssthresh was not decreased in step (4). Second, when there was a series of such FRTO (1-4) sequences that happened to be followed by an FRTO undo, we would restore the cwnd and ssthresh from before the entire series started (instead of the cwnd and ssthresh from before the most recent RTO). This could result in cwnd and ssthresh being restored to values much bigger than the proper values. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 20:13:07 +00:00
icsk->icsk_retransmits = 0;
}
prior_fackets = tp->fackets_out;
/* ts_recent update must be made after we are sure that the packet
* is in window.
*/
if (flag & FLAG_UPDATE_TS_RECENT)
tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
if (!(flag & FLAG_SLOWPATH) && after(ack, prior_snd_una)) {
/* Window is constant, pure forward advance.
* No more checks are required.
* Note, we use the fact that SND.UNA>=SND.WL2.
*/
tcp_update_wl(tp, ack_seq);
tcp_snd_una_update(tp, ack);
flag |= FLAG_WIN_UPDATE;
tcp_in_ack_event(sk, CA_ACK_WIN_UPDATE);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPHPACKS);
} else {
u32 ack_ev_flags = CA_ACK_SLOWPATH;
if (ack_seq != TCP_SKB_CB(skb)->end_seq)
flag |= FLAG_DATA;
else
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPPUREACKS);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
flag |= tcp_ack_update_window(sk, skb, ack, ack_seq);
if (TCP_SKB_CB(skb)->sacked)
flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una,
&sack_state);
if (tcp_ecn_rcv_ecn_echo(tp, tcp_hdr(skb))) {
flag |= FLAG_ECE;
ack_ev_flags |= CA_ACK_ECE;
}
if (flag & FLAG_WIN_UPDATE)
ack_ev_flags |= CA_ACK_WIN_UPDATE;
tcp_in_ack_event(sk, ack_ev_flags);
}
/* We passed data and got it acked, remove any soft error
* log. Something worked...
*/
sk->sk_err_soft = 0;
tcp: Clear probes_out more aggressively in tcp_ack(). This is based upon an excellent bug report from Eric Dumazet. tcp_ack() should clear ->icsk_probes_out even if there are packets outstanding. Otherwise if we get a sequence of ACKs while we do have packets outstanding over and over again, we'll never clear the probes_out value and eventually think the connection is too sick and we'll reset it. This appears to be some "optimization" added to tcp_ack() in the 2.4.x timeframe. In 2.2.x, probes_out is pretty much always cleared by tcp_ack(). Here is Eric's original report: ---------------------------------------- Apparently, we can in some situations reset TCP connections in a couple of seconds when some frames are lost. In order to reproduce the problem, please try the following program on linux-2.6.25.* Setup some iptables rules to allow two frames per second sent on loopback interface to tcp destination port 12000 iptables -N SLOWLO iptables -A SLOWLO -m hashlimit --hashlimit 2 --hashlimit-burst 1 --hashlimit-mode dstip --hashlimit-name slow2 -j ACCEPT iptables -A SLOWLO -j DROP iptables -A OUTPUT -o lo -p tcp --dport 12000 -j SLOWLO Then run the attached program and see the output : # ./loop State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,1) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,3) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,5) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,7) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,9) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,200ms,11) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,201ms,13) State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 40 127.0.0.1:54455 127.0.0.1:12000 timer:(persist,188ms,15) write(): Connection timed out wrote 890 bytes but was interrupted after 9 seconds ESTAB 0 0 127.0.0.1:12000 127.0.0.1:54455 Exiting read() because no data available (4000 ms timeout). read 860 bytes While this tcp session makes progress (sending frames with 50 bytes of payload, every 500ms), linux tcp stack decides to reset it, when tcp_retries 2 is reached (default value : 15) tcpdump : 15:30:28.856695 IP 127.0.0.1.56554 > 127.0.0.1.12000: S 33788768:33788768(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7> 15:30:28.856711 IP 127.0.0.1.12000 > 127.0.0.1.56554: S 33899253:33899253(0) ack 33788769 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7> 15:30:29.356947 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 1:61(60) ack 1 win 257 15:30:29.356966 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 61 win 257 15:30:29.866415 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 61:111(50) ack 1 win 257 15:30:29.866427 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 111 win 257 15:30:30.366516 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 111:161(50) ack 1 win 257 15:30:30.366527 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 161 win 257 15:30:30.876196 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 161:211(50) ack 1 win 257 15:30:30.876207 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 211 win 257 15:30:31.376282 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 211:261(50) ack 1 win 257 15:30:31.376290 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 261 win 257 15:30:31.885619 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 261:311(50) ack 1 win 257 15:30:31.885631 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 311 win 257 15:30:32.385705 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 311:361(50) ack 1 win 257 15:30:32.385715 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 361 win 257 15:30:32.895249 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 361:411(50) ack 1 win 257 15:30:32.895266 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 411 win 257 15:30:33.395341 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 411:461(50) ack 1 win 257 15:30:33.395351 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 461 win 257 15:30:33.918085 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 461:511(50) ack 1 win 257 15:30:33.918096 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 511 win 257 15:30:34.418163 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 511:561(50) ack 1 win 257 15:30:34.418172 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 561 win 257 15:30:34.927685 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 561:611(50) ack 1 win 257 15:30:34.927698 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 611 win 257 15:30:35.427757 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 611:661(50) ack 1 win 257 15:30:35.427766 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 661 win 257 15:30:35.937359 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 661:711(50) ack 1 win 257 15:30:35.937376 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 711 win 257 15:30:36.437451 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 711:761(50) ack 1 win 257 15:30:36.437464 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 761 win 257 15:30:36.947022 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 761:811(50) ack 1 win 257 15:30:36.947039 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 811 win 257 15:30:37.447135 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 811:861(50) ack 1 win 257 15:30:37.447203 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 861 win 257 15:30:41.448171 IP 127.0.0.1.12000 > 127.0.0.1.56554: F 1:1(0) ack 861 win 257 15:30:41.448189 IP 127.0.0.1.56554 > 127.0.0.1.12000: R 33789629:33789629(0) win 0 Source of program : /* * small producer/consumer program. * setup a listener on 127.0.0.1:12000 * Forks a child * child connect to 127.0.0.1, and sends 10 bytes on this tcp socket every 100 ms * Father accepts connection, and read all data */ #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <unistd.h> #include <stdio.h> #include <time.h> #include <sys/poll.h> int port = 12000; char buffer[4096]; int main(int argc, char *argv[]) { int lfd = socket(AF_INET, SOCK_STREAM, 0); struct sockaddr_in socket_address; time_t t0, t1; int on = 1, sfd, res; unsigned long total = 0; socklen_t alen = sizeof(socket_address); pid_t pid; time(&t0); socket_address.sin_family = AF_INET; socket_address.sin_port = htons(port); socket_address.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (lfd == -1) { perror("socket()"); return 1; } setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(int)); if (bind(lfd, (struct sockaddr *)&socket_address, sizeof(socket_address)) == -1) { perror("bind"); close(lfd); return 1; } if (listen(lfd, 1) == -1) { perror("listen()"); close(lfd); return 1; } pid = fork(); if (pid == 0) { int i, cfd = socket(AF_INET, SOCK_STREAM, 0); close(lfd); if (connect(cfd, (struct sockaddr *)&socket_address, sizeof(socket_address)) == -1) { perror("connect()"); return 1; } for (i = 0 ; ;) { res = write(cfd, "blablabla\n", 10); if (res > 0) total += res; else if (res == -1) { perror("write()"); break; } else break; usleep(100000); if (++i == 10) { system("ss -on dst 127.0.0.1:12000"); i = 0; } } time(&t1); fprintf(stderr, "wrote %lu bytes but was interrupted after %g seconds\n", total, difftime(t1, t0)); system("ss -on | grep 127.0.0.1:12000"); close(cfd); return 0; } sfd = accept(lfd, (struct sockaddr *)&socket_address, &alen); if (sfd == -1) { perror("accept"); return 1; } close(lfd); while (1) { struct pollfd pfd[1]; pfd[0].fd = sfd; pfd[0].events = POLLIN; if (poll(pfd, 1, 4000) == 0) { fprintf(stderr, "Exiting read() because no data available (4000 ms timeout).\n"); break; } res = read(sfd, buffer, sizeof(buffer)); if (res > 0) total += res; else if (res == 0) break; else perror("read()"); } fprintf(stderr, "read %lu bytes\n", total); close(sfd); return 0; } ---------------------------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23 23:38:45 +00:00
icsk->icsk_probes_out = 0;
tp->rcv_tstamp = tcp_time_stamp;
if (!prior_packets)
goto no_queue;
/* See if we can take anything off of the retransmit queue. */
flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una, &acked,
&sack_state);
Proportional Rate Reduction for TCP. This patch implements Proportional Rate Reduction (PRR) for TCP. PRR is an algorithm that determines TCP's sending rate in fast recovery. PRR avoids excessive window reductions and aims for the actual congestion window size at the end of recovery to be as close as possible to the window determined by the congestion control algorithm. PRR also improves accuracy of the amount of data sent during loss recovery. The patch implements the recommended flavor of PRR called PRR-SSRB (Proportional rate reduction with slow start reduction bound) and replaces the existing rate halving algorithm. PRR improves upon the existing Linux fast recovery under a number of conditions including: 1) burst losses where the losses implicitly reduce the amount of outstanding data (pipe) below the ssthresh value selected by the congestion control algorithm and, 2) losses near the end of short flows where application runs out of data to send. As an example, with the existing rate halving implementation a single loss event can cause a connection carrying short Web transactions to go into the slow start mode after the recovery. This is because during recovery Linux pulls the congestion window down to packets_in_flight+1 on every ACK. A short Web response often runs out of new data to send and its pipe reduces to zero by the end of recovery when all its packets are drained from the network. Subsequent HTTP responses using the same connection will have to slow start to raise cwnd to ssthresh. PRR on the other hand aims for the cwnd to be as close as possible to ssthresh by the end of recovery. A description of PRR and a discussion of its performance can be found at the following links: - IETF Draft: http://tools.ietf.org/html/draft-mathis-tcpm-proportional-rate-reduction-01 - IETF Slides: http://www.ietf.org/proceedings/80/slides/tcpm-6.pdf http://tools.ietf.org/agenda/81/slides/tcpm-2.pdf - Paper to appear in Internet Measurements Conference (IMC) 2011: Improving TCP Loss Recovery Nandita Dukkipati, Matt Mathis, Yuchung Cheng Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-21 20:21:57 +00:00
if (tcp_ack_is_dubious(sk, flag)) {
is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP));
tcp_fastretrans_alert(sk, acked, is_dupack, &flag, &rexmit);
}
if (tp->tlp_high_seq)
tcp_process_tlp_ack(sk, ack, flag);
if ((flag & FLAG_FORWARD_PROGRESS) || !(flag & FLAG_NOT_DUP)) {
struct dst_entry *dst = __sk_dst_get(sk);
if (dst)
dst_confirm(dst);
}
tcp: Tail loss probe (TLP) This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 10:00:43 +00:00
if (icsk->icsk_pending == ICSK_TIME_RETRANS)
tcp_schedule_loss_probe(sk);
tcp_cong_control(sk, ack, tp->delivered - prior_delivered, flag);
tcp_xmit_recovery(sk, rexmit);
return 1;
no_queue:
/* If data was DSACKed, see if we can undo a cwnd reduction. */
if (flag & FLAG_DSACKING_ACK)
tcp_fastretrans_alert(sk, acked, is_dupack, &flag, &rexmit);
/* If this ack opens up a zero window, clear backoff. It was
* being used to time the probes, and is probably far higher than
* it needs to be for normal retransmission.
*/
if (tcp_send_head(sk))
tcp_ack_probe(sk);
if (tp->tlp_high_seq)
tcp_process_tlp_ack(sk, ack, flag);
return 1;
invalid_ack:
SOCK_DEBUG(sk, "Ack %u after %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
return -1;
old_ack:
/* If data was SACKed, tag it and see if we should send more data.
* If data was DSACKed, see if we can undo a cwnd reduction.
*/
tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 18:34:22 +00:00
if (TCP_SKB_CB(skb)->sacked) {
flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una,
&sack_state);
tcp_fastretrans_alert(sk, acked, is_dupack, &flag, &rexmit);
tcp_xmit_recovery(sk, rexmit);
tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 18:34:22 +00:00
}
SOCK_DEBUG(sk, "Ack %u before %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
return 0;
}
static void tcp_parse_fastopen_option(int len, const unsigned char *cookie,
bool syn, struct tcp_fastopen_cookie *foc,
bool exp_opt)
{
/* Valid only in SYN or SYN-ACK with an even length. */
if (!foc || !syn || len < 0 || (len & 1))
return;
if (len >= TCP_FASTOPEN_COOKIE_MIN &&
len <= TCP_FASTOPEN_COOKIE_MAX)
memcpy(foc->val, cookie, len);
else if (len != 0)
len = -1;
foc->len = len;
foc->exp = exp_opt;
}
/* Look for tcp options. Normally only called on SYN and SYNACK packets.
* But, this can also be called on packets in the established flow when
* the fast version below fails.
*/
void tcp_parse_options(const struct sk_buff *skb,
struct tcp_options_received *opt_rx, int estab,
struct tcp_fastopen_cookie *foc)
{
const unsigned char *ptr;
const struct tcphdr *th = tcp_hdr(skb);
int length = (th->doff * 4) - sizeof(struct tcphdr);
ptr = (const unsigned char *)(th + 1);
opt_rx->saw_tstamp = 0;
while (length > 0) {
int opcode = *ptr++;
int opsize;
switch (opcode) {
case TCPOPT_EOL:
return;
case TCPOPT_NOP: /* Ref: RFC 793 section 3.1 */
length--;
continue;
default:
opsize = *ptr++;
if (opsize < 2) /* "silly options" */
return;
if (opsize > length)
return; /* don't parse partial options */
switch (opcode) {
case TCPOPT_MSS:
if (opsize == TCPOLEN_MSS && th->syn && !estab) {
u16 in_mss = get_unaligned_be16(ptr);
if (in_mss) {
if (opt_rx->user_mss &&
opt_rx->user_mss < in_mss)
in_mss = opt_rx->user_mss;
opt_rx->mss_clamp = in_mss;
}
}
break;
case TCPOPT_WINDOW:
if (opsize == TCPOLEN_WINDOW && th->syn &&
!estab && sysctl_tcp_window_scaling) {
__u8 snd_wscale = *(__u8 *)ptr;
opt_rx->wscale_ok = 1;
if (snd_wscale > 14) {
net_info_ratelimited("%s: Illegal window scaling value %d >14 received\n",
__func__,
snd_wscale);
snd_wscale = 14;
}
opt_rx->snd_wscale = snd_wscale;
}
break;
case TCPOPT_TIMESTAMP:
if ((opsize == TCPOLEN_TIMESTAMP) &&
((estab && opt_rx->tstamp_ok) ||
(!estab && sysctl_tcp_timestamps))) {
opt_rx->saw_tstamp = 1;
opt_rx->rcv_tsval = get_unaligned_be32(ptr);
opt_rx->rcv_tsecr = get_unaligned_be32(ptr + 4);
}
break;
case TCPOPT_SACK_PERM:
if (opsize == TCPOLEN_SACK_PERM && th->syn &&
!estab && sysctl_tcp_sack) {
opt_rx->sack_ok = TCP_SACK_SEEN;
tcp_sack_reset(opt_rx);
}
break;
case TCPOPT_SACK:
if ((opsize >= (TCPOLEN_SACK_BASE + TCPOLEN_SACK_PERBLOCK)) &&
!((opsize - TCPOLEN_SACK_BASE) % TCPOLEN_SACK_PERBLOCK) &&
opt_rx->sack_ok) {
TCP_SKB_CB(skb)->sacked = (ptr - 2) - (unsigned char *)th;
}
break;
#ifdef CONFIG_TCP_MD5SIG
case TCPOPT_MD5SIG:
/*
* The MD5 Hash has already been
* checked (see tcp_v{4,6}_do_rcv()).
*/
break;
#endif
case TCPOPT_FASTOPEN:
tcp_parse_fastopen_option(
opsize - TCPOLEN_FASTOPEN_BASE,
ptr, th->syn, foc, false);
break;
case TCPOPT_EXP:
/* Fast Open option shares code 254 using a
* 16 bits magic number.
*/
if (opsize >= TCPOLEN_EXP_FASTOPEN_BASE &&
get_unaligned_be16(ptr) ==
TCPOPT_FASTOPEN_MAGIC)
tcp_parse_fastopen_option(opsize -
TCPOLEN_EXP_FASTOPEN_BASE,
ptr + 2, th->syn, foc, true);
break;
}
ptr += opsize-2;
length -= opsize;
}
}
}
EXPORT_SYMBOL(tcp_parse_options);
static bool tcp_parse_aligned_timestamp(struct tcp_sock *tp, const struct tcphdr *th)
{
const __be32 *ptr = (const __be32 *)(th + 1);
if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
| (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
tp->rx_opt.saw_tstamp = 1;
++ptr;
tp->rx_opt.rcv_tsval = ntohl(*ptr);
++ptr;
if (*ptr)
tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
else
tp->rx_opt.rcv_tsecr = 0;
return true;
}
return false;
}
/* Fast parse options. This hopes to only see timestamps.
* If it is wrong it falls back on tcp_parse_options().
*/
static bool tcp_fast_parse_options(const struct sk_buff *skb,
const struct tcphdr *th, struct tcp_sock *tp)
{
/* In the spirit of fast parsing, compare doff directly to constant
* values. Because equality is used, short doff can be ignored here.
*/
if (th->doff == (sizeof(*th) / 4)) {
tp->rx_opt.saw_tstamp = 0;
return false;
} else if (tp->rx_opt.tstamp_ok &&
th->doff == ((sizeof(*th) + TCPOLEN_TSTAMP_ALIGNED) / 4)) {
if (tcp_parse_aligned_timestamp(tp, th))
return true;
}
tcp_parse_options(skb, &tp->rx_opt, 1, NULL);
if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr)
tp->rx_opt.rcv_tsecr -= tp->tsoffset;
return true;
}
#ifdef CONFIG_TCP_MD5SIG
/*
* Parse MD5 Signature option
*/
const u8 *tcp_parse_md5sig_option(const struct tcphdr *th)
{
int length = (th->doff << 2) - sizeof(*th);
const u8 *ptr = (const u8 *)(th + 1);
/* If the TCP option is too short, we can short cut */
if (length < TCPOLEN_MD5SIG)
return NULL;
while (length > 0) {
int opcode = *ptr++;
int opsize;
switch (opcode) {
case TCPOPT_EOL:
return NULL;
case TCPOPT_NOP:
length--;
continue;
default:
opsize = *ptr++;
if (opsize < 2 || opsize > length)
return NULL;
if (opcode == TCPOPT_MD5SIG)
return opsize == TCPOLEN_MD5SIG ? ptr : NULL;
}
ptr += opsize - 2;
length -= opsize;
}
return NULL;
}
EXPORT_SYMBOL(tcp_parse_md5sig_option);
#endif
/* Sorry, PAWS as specified is broken wrt. pure-ACKs -DaveM
*
* It is not fatal. If this ACK does _not_ change critical state (seqs, window)
* it can pass through stack. So, the following predicate verifies that
* this segment is not used for anything but congestion avoidance or
* fast retransmit. Moreover, we even are able to eliminate most of such
* second order effects, if we apply some small "replay" window (~RTO)
* to timestamp space.
*
* All these measures still do not guarantee that we reject wrapped ACKs
* on networks with high bandwidth, when sequence space is recycled fastly,
* but it guarantees that such events will be very rare and do not affect
* connection seriously. This doesn't look nice, but alas, PAWS is really
* buggy extension.
*
* [ Later note. Even worse! It is buggy for segments _with_ data. RFC
* states that events when retransmit arrives after original data are rare.
* It is a blatant lie. VJ forgot about fast retransmit! 8)8) It is
* the biggest problem on large power networks even with minor reordering.
* OK, let's give it small replay window. If peer clock is even 1hz, it is safe
* up to bandwidth of 18Gigabit/sec. 8) ]
*/
static int tcp_disordered_ack(const struct sock *sk, const struct sk_buff *skb)
{
const struct tcp_sock *tp = tcp_sk(sk);
const struct tcphdr *th = tcp_hdr(skb);
u32 seq = TCP_SKB_CB(skb)->seq;
u32 ack = TCP_SKB_CB(skb)->ack_seq;
return (/* 1. Pure ACK with correct sequence number. */
(th->ack && seq == TCP_SKB_CB(skb)->end_seq && seq == tp->rcv_nxt) &&
/* 2. ... and duplicate ACK. */
ack == tp->snd_una &&
/* 3. ... and does not update window. */
!tcp_may_update_window(tp, ack, seq, ntohs(th->window) << tp->rx_opt.snd_wscale) &&
/* 4. ... and sits in replay window. */
(s32)(tp->rx_opt.ts_recent - tp->rx_opt.rcv_tsval) <= (inet_csk(sk)->icsk_rto * 1024) / HZ);
}
static inline bool tcp_paws_discard(const struct sock *sk,
const struct sk_buff *skb)
{
const struct tcp_sock *tp = tcp_sk(sk);
return !tcp_paws_check(&tp->rx_opt, TCP_PAWS_WINDOW) &&
!tcp_disordered_ack(sk, skb);
}
/* Check segment sequence number for validity.
*
* Segment controls are considered valid, if the segment
* fits to the window after truncation to the window. Acceptability
* of data (and SYN, FIN, of course) is checked separately.
* See tcp_data_queue(), for example.
*
* Also, controls (RST is main one) are accepted using RCV.WUP instead
* of RCV.NXT. Peer still did not advance his SND.UNA when we
* delayed ACK, so that hisSND.UNA<=ourRCV.WUP.
* (borrowed from freebsd)
*/
static inline bool tcp_sequence(const struct tcp_sock *tp, u32 seq, u32 end_seq)
{
return !before(end_seq, tp->rcv_wup) &&
!after(seq, tp->rcv_nxt + tcp_receive_window(tp));
}
/* When we get a reset we do this. */
void tcp_reset(struct sock *sk)
{
/* We want the right error as BSD sees it (and indeed as we do). */
switch (sk->sk_state) {
case TCP_SYN_SENT:
sk->sk_err = ECONNREFUSED;
break;
case TCP_CLOSE_WAIT:
sk->sk_err = EPIPE;
break;
case TCP_CLOSE:
return;
default:
sk->sk_err = ECONNRESET;
}
/* This barrier is coupled with smp_rmb() in tcp_poll() */
smp_wmb();
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_error_report(sk);
tcp_done(sk);
}
/*
* Process the FIN bit. This now behaves as it is supposed to work
* and the FIN takes effect when it is validly part of sequence
* space. Not before when we get holes.
*
* If we are ESTABLISHED, a received fin moves us to CLOSE-WAIT
* (and thence onto LAST-ACK and finally, CLOSE, we never enter
* TIME-WAIT)
*
* If we are in FINWAIT-1, a received FIN indicates simultaneous
* close and we go into CLOSING (and later onto TIME-WAIT)
*
* If we are in FINWAIT-2, a received FIN moves us to TIME-WAIT.
*/
void tcp_fin(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
inet_csk_schedule_ack(sk);
sk->sk_shutdown |= RCV_SHUTDOWN;
sock_set_flag(sk, SOCK_DONE);
switch (sk->sk_state) {
case TCP_SYN_RECV:
case TCP_ESTABLISHED:
/* Move to CLOSE_WAIT */
tcp_set_state(sk, TCP_CLOSE_WAIT);
tcp: v1 always send a quick ack when quickacks are enabled V1 of this patch contains Eric Dumazet's suggestion to move the per dst RTAX_QUICKACK check into tcp_in_quickack_mode(). Thanks Eric. I ran some tests and after setting the "ip route change quickack 1" knob there were still many delayed ACKs sent. This occured because when icsk_ack.quick=0 the !icsk_ack.pingpong value is subsequently ignored as tcp_in_quickack_mode() checks both these values. The condition for a quick ack to trigger requires that both icsk_ack.quick != 0 and icsk_ack.pingpong=0. Currently only icsk_ack.pingpong is controlled by the knob. But the icsk_ack.quick value changes dynamically depending on heuristics. The crux of the matter is that delayed acks still cannot be entirely disabled even with the RTAX_QUICKACK per dst knob enabled. This patch ensures that a quick ack is always sent when the RTAX_QUICKACK per dst knob is turned on. The "ip route change quickack 1" knob was recently added to enable quickacks. It was modeled around the TCP_QUICKACK setsockopt() option. This issue is that even with "ip route change quickack 1" enabled we still see delayed ACKs under some conditions. It would be nice to be able to completely disable delayed ACKs. Here is an example: # netstat -s|grep dela 3 delayed acks sent For all routes enable the knob # ip route change quickack 1 Generate some traffic across a slow link and we still see the delayed acks. # netstat -s|grep dela 106 delayed acks sent 1 delayed acks further delayed because of locked socket The issue is that both the "ip route change quickack 1" knob and the TCP_QUICKACK option set the icsk_ack.pingpong variable to 0. However at the business end in the __tcp_ack_snd_check() routine, tcp_in_quickack_mode() checks that both icsk_ack.quick != 0 and icsk_ack.pingpong=0 in order to trigger a quickack. As icsk_ack.quick is determined by heuristics it can be 0. When that occurs the icsk_ack.pingpong value is ignored and a delayed ACK is sent regardless. This patch moves the RTAX_QUICKACK per dst check into the tcp_in_quickack_mode() routine which ensures that a quickack is always sent when the quickack knob is enabled for that dst. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 00:12:28 +00:00
inet_csk(sk)->icsk_ack.pingpong = 1;
break;
case TCP_CLOSE_WAIT:
case TCP_CLOSING:
/* Received a retransmission of the FIN, do
* nothing.
*/
break;
case TCP_LAST_ACK:
/* RFC793: Remain in the LAST-ACK state. */
break;
case TCP_FIN_WAIT1:
/* This case occurs when a simultaneous close
* happens, we must ack the received FIN and
* enter the CLOSING state.
*/
tcp_send_ack(sk);
tcp_set_state(sk, TCP_CLOSING);
break;
case TCP_FIN_WAIT2:
/* Received a FIN -- send ACK and enter TIME_WAIT. */
tcp_send_ack(sk);
tcp_time_wait(sk, TCP_TIME_WAIT, 0);
break;
default:
/* Only TCP_LISTEN and TCP_CLOSE are left, in these
* cases we should never reach this piece of code.
*/
pr_err("%s: Impossible, sk->sk_state=%d\n",
__func__, sk->sk_state);
break;
}
/* It _is_ possible, that we have something out-of-order _after_ FIN.
* Probably, we should reset in this case. For now drop them.
*/
__skb_queue_purge(&tp->out_of_order_queue);
if (tcp_is_sack(tp))
tcp_sack_reset(&tp->rx_opt);
[NET] CORE: Introducing new memory accounting interface. This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 08:11:19 +00:00
sk_mem_reclaim(sk);
if (!sock_flag(sk, SOCK_DEAD)) {
sk->sk_state_change(sk);
/* Do not send POLL_HUP for half duplex close. */
if (sk->sk_shutdown == SHUTDOWN_MASK ||
sk->sk_state == TCP_CLOSE)
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_HUP);
else
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
}
}
static inline bool tcp_sack_extend(struct tcp_sack_block *sp, u32 seq,
u32 end_seq)
{
if (!after(seq, sp->end_seq) && !after(sp->start_seq, end_seq)) {
if (before(seq, sp->start_seq))
sp->start_seq = seq;
if (after(end_seq, sp->end_seq))
sp->end_seq = end_seq;
return true;
}
return false;
}
static void tcp_dsack_set(struct sock *sk, u32 seq, u32 end_seq)
{
struct tcp_sock *tp = tcp_sk(sk);
if (tcp_is_sack(tp) && sysctl_tcp_dsack) {
int mib_idx;
if (before(seq, tp->rcv_nxt))
mib_idx = LINUX_MIB_TCPDSACKOLDSENT;
else
mib_idx = LINUX_MIB_TCPDSACKOFOSENT;
NET_INC_STATS(sock_net(sk), mib_idx);
tp->rx_opt.dsack = 1;
tp->duplicate_sack[0].start_seq = seq;
tp->duplicate_sack[0].end_seq = end_seq;
}
}
static void tcp_dsack_extend(struct sock *sk, u32 seq, u32 end_seq)
{
struct tcp_sock *tp = tcp_sk(sk);
if (!tp->rx_opt.dsack)
tcp_dsack_set(sk, seq, end_seq);
else
tcp_sack_extend(tp->duplicate_sack, seq, end_seq);
}
static void tcp_send_dupack(struct sock *sk, const struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
if (TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb)->seq &&
before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
tcp_enter_quickack_mode(sk);
if (tcp_is_sack(tp) && sysctl_tcp_dsack) {
u32 end_seq = TCP_SKB_CB(skb)->end_seq;
if (after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt))
end_seq = tp->rcv_nxt;
tcp_dsack_set(sk, TCP_SKB_CB(skb)->seq, end_seq);
}
}
tcp_send_ack(sk);
}
/* These routines update the SACK block as out-of-order packets arrive or
* in-order packets close up the sequence space.
*/
static void tcp_sack_maybe_coalesce(struct tcp_sock *tp)
{
int this_sack;
struct tcp_sack_block *sp = &tp->selective_acks[0];
struct tcp_sack_block *swalk = sp + 1;
/* See if the recent change to the first SACK eats into
* or hits the sequence space of other SACK blocks, if so coalesce.
*/
for (this_sack = 1; this_sack < tp->rx_opt.num_sacks;) {
if (tcp_sack_extend(sp, swalk->start_seq, swalk->end_seq)) {
int i;
/* Zap SWALK, by moving every further SACK up by one slot.
* Decrease num_sacks.
*/
tp->rx_opt.num_sacks--;
for (i = this_sack; i < tp->rx_opt.num_sacks; i++)
sp[i] = sp[i + 1];
continue;
}
this_sack++, swalk++;
}
}
static void tcp_sack_new_ofo_skb(struct sock *sk, u32 seq, u32 end_seq)
{
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_sack_block *sp = &tp->selective_acks[0];
int cur_sacks = tp->rx_opt.num_sacks;
int this_sack;
if (!cur_sacks)
goto new_sack;
for (this_sack = 0; this_sack < cur_sacks; this_sack++, sp++) {
if (tcp_sack_extend(sp, seq, end_seq)) {
/* Rotate this_sack to the first one. */
for (; this_sack > 0; this_sack--, sp--)
swap(*sp, *(sp - 1));
if (cur_sacks > 1)
tcp_sack_maybe_coalesce(tp);
return;
}
}
/* Could not find an adjacent existing SACK, build a new one,
* put it at the front, and shift everyone else down. We
* always know there is at least one SACK present already here.
*
* If the sack array is full, forget about the last one.
*/
if (this_sack >= TCP_NUM_SACKS) {
this_sack--;
tp->rx_opt.num_sacks--;
sp--;
}
for (; this_sack > 0; this_sack--, sp--)
*sp = *(sp - 1);
new_sack:
/* Build the new head SACK, and we're done. */
sp->start_seq = seq;
sp->end_seq = end_seq;
tp->rx_opt.num_sacks++;
}
/* RCV.NXT advances, some SACKs should be eaten. */
static void tcp_sack_remove(struct tcp_sock *tp)
{
struct tcp_sack_block *sp = &tp->selective_acks[0];
int num_sacks = tp->rx_opt.num_sacks;
int this_sack;
/* Empty ofo queue, hence, all the SACKs are eaten. Clear. */
if (skb_queue_empty(&tp->out_of_order_queue)) {
tp->rx_opt.num_sacks = 0;
return;
}
for (this_sack = 0; this_sack < num_sacks;) {
/* Check if the start of the sack is covered by RCV.NXT. */
if (!before(tp->rcv_nxt, sp->start_seq)) {
int i;
/* RCV.NXT must cover all the block! */
WARN_ON(before(tp->rcv_nxt, sp->end_seq));
/* Zap this SACK, by moving forward any other SACKS. */
for (i = this_sack+1; i < num_sacks; i++)
tp->selective_acks[i-1] = tp->selective_acks[i];
num_sacks--;
continue;
}
this_sack++;
sp++;
}
tp->rx_opt.num_sacks = num_sacks;
}
/**
* tcp_try_coalesce - try to merge skb to prior one
* @sk: socket
* @to: prior buffer
* @from: buffer to add in queue
* @fragstolen: pointer to boolean
*
* Before queueing skb @from after @to, try to merge them
* to reduce overall memory use and queue lengths, if cost is small.
* Packets in ofo or receive queues can stay a long time.
* Better try to coalesce them right now to avoid future collapses.
* Returns true if caller should free @from instead of queueing it
*/
static bool tcp_try_coalesce(struct sock *sk,
struct sk_buff *to,
struct sk_buff *from,
bool *fragstolen)
{
int delta;
*fragstolen = false;
/* Its possible this segment overlaps with prior segment in queue */
if (TCP_SKB_CB(from)->seq != TCP_SKB_CB(to)->end_seq)
return false;
if (!skb_try_coalesce(to, from, fragstolen, &delta))
return false;
atomic_add(delta, &sk->sk_rmem_alloc);
sk_mem_charge(sk, delta);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPRCVCOALESCE);
TCP_SKB_CB(to)->end_seq = TCP_SKB_CB(from)->end_seq;
TCP_SKB_CB(to)->ack_seq = TCP_SKB_CB(from)->ack_seq;
TCP_SKB_CB(to)->tcp_flags |= TCP_SKB_CB(from)->tcp_flags;
return true;
}
static void tcp_drop(struct sock *sk, struct sk_buff *skb)
{
sk_drops_add(sk, skb);
__kfree_skb(skb);
}
/* This one checks to see if we can put data from the
* out_of_order queue into the receive_queue.
*/
static void tcp_ofo_queue(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
__u32 dsack_high = tp->rcv_nxt;
struct sk_buff *skb, *tail;
bool fragstolen, eaten;
while ((skb = skb_peek(&tp->out_of_order_queue)) != NULL) {
if (after(TCP_SKB_CB(skb)->seq, tp->rcv_nxt))
break;
if (before(TCP_SKB_CB(skb)->seq, dsack_high)) {
__u32 dsack = dsack_high;
if (before(TCP_SKB_CB(skb)->end_seq, dsack_high))
dsack_high = TCP_SKB_CB(skb)->end_seq;
tcp_dsack_extend(sk, TCP_SKB_CB(skb)->seq, dsack);
}
__skb_unlink(skb, &tp->out_of_order_queue);
if (!after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) {
SOCK_DEBUG(sk, "ofo packet was already received\n");
tcp_drop(sk, skb);
continue;
}
SOCK_DEBUG(sk, "ofo requeuing : rcv_next %X seq %X - %X\n",
tp->rcv_nxt, TCP_SKB_CB(skb)->seq,
TCP_SKB_CB(skb)->end_seq);
tail = skb_peek_tail(&sk->sk_receive_queue);
eaten = tail && tcp_try_coalesce(sk, tail, skb, &fragstolen);
tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq);
if (!eaten)
__skb_queue_tail(&sk->sk_receive_queue, skb);
if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
tcp_fin(sk);
if (eaten)
kfree_skb_partial(skb, fragstolen);
}
}
static bool tcp_prune_ofo_queue(struct sock *sk);
static int tcp_prune_queue(struct sock *sk);
netvm: prevent a stream-specific deadlock This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:41 +00:00
static int tcp_try_rmem_schedule(struct sock *sk, struct sk_buff *skb,
unsigned int size)
{
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
netvm: prevent a stream-specific deadlock This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:41 +00:00
!sk_rmem_schedule(sk, skb, size)) {
if (tcp_prune_queue(sk) < 0)
return -1;
netvm: prevent a stream-specific deadlock This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:41 +00:00
if (!sk_rmem_schedule(sk, skb, size)) {
if (!tcp_prune_ofo_queue(sk))
return -1;
netvm: prevent a stream-specific deadlock This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:41 +00:00
if (!sk_rmem_schedule(sk, skb, size))
return -1;
}
}
return 0;
}
static void tcp_data_queue_ofo(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb1;
u32 seq, end_seq;
tcp_ecn_check_ce(tp, skb);
netvm: prevent a stream-specific deadlock This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:41 +00:00
if (unlikely(tcp_try_rmem_schedule(sk, skb, skb->truesize))) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPOFODROP);
tcp_drop(sk, skb);
return;
}
/* Disable header prediction. */
tp->pred_flags = 0;
inet_csk_schedule_ack(sk);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPOFOQUEUE);
SOCK_DEBUG(sk, "out of order segment: rcv_next %X seq %X - %X\n",
tp->rcv_nxt, TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq);
skb1 = skb_peek_tail(&tp->out_of_order_queue);
if (!skb1) {
/* Initial out of order segment, build 1 SACK. */
if (tcp_is_sack(tp)) {
tp->rx_opt.num_sacks = 1;
tp->selective_acks[0].start_seq = TCP_SKB_CB(skb)->seq;
tp->selective_acks[0].end_seq =
TCP_SKB_CB(skb)->end_seq;
}
__skb_queue_head(&tp->out_of_order_queue, skb);
goto end;
}
seq = TCP_SKB_CB(skb)->seq;
end_seq = TCP_SKB_CB(skb)->end_seq;
if (seq == TCP_SKB_CB(skb1)->end_seq) {
bool fragstolen;
if (!tcp_try_coalesce(sk, skb1, skb, &fragstolen)) {
__skb_queue_after(&tp->out_of_order_queue, skb1, skb);
} else {
tcp_grow_window(sk, skb);
kfree_skb_partial(skb, fragstolen);
skb = NULL;
}
if (!tp->rx_opt.num_sacks ||
tp->selective_acks[0].end_seq != seq)
goto add_sack;
/* Common case: data arrive in order after hole. */
tp->selective_acks[0].end_seq = end_seq;
goto end;
}
/* Find place to insert this segment. */
while (1) {
if (!after(TCP_SKB_CB(skb1)->seq, seq))
break;
if (skb_queue_is_first(&tp->out_of_order_queue, skb1)) {
skb1 = NULL;
break;
}
skb1 = skb_queue_prev(&tp->out_of_order_queue, skb1);
}
/* Do skb overlap to previous one? */
if (skb1 && before(seq, TCP_SKB_CB(skb1)->end_seq)) {
if (!after(end_seq, TCP_SKB_CB(skb1)->end_seq)) {
/* All the bits are present. Drop. */
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPOFOMERGE);
tcp_drop(sk, skb);
skb = NULL;
tcp_dsack_set(sk, seq, end_seq);
goto add_sack;
}
if (after(seq, TCP_SKB_CB(skb1)->seq)) {
/* Partial overlap. */
tcp_dsack_set(sk, seq,
TCP_SKB_CB(skb1)->end_seq);
} else {
if (skb_queue_is_first(&tp->out_of_order_queue,
skb1))
skb1 = NULL;
else
skb1 = skb_queue_prev(
&tp->out_of_order_queue,
skb1);
}
}
if (!skb1)
__skb_queue_head(&tp->out_of_order_queue, skb);
else
__skb_queue_after(&tp->out_of_order_queue, skb1, skb);
/* And clean segments covered by new one as whole. */
while (!skb_queue_is_last(&tp->out_of_order_queue, skb)) {
skb1 = skb_queue_next(&tp->out_of_order_queue, skb);
if (!after(end_seq, TCP_SKB_CB(skb1)->seq))
break;
if (before(end_seq, TCP_SKB_CB(skb1)->end_seq)) {
tcp_dsack_extend(sk, TCP_SKB_CB(skb1)->seq,
end_seq);
break;
}
__skb_unlink(skb1, &tp->out_of_order_queue);
tcp_dsack_extend(sk, TCP_SKB_CB(skb1)->seq,
TCP_SKB_CB(skb1)->end_seq);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPOFOMERGE);
tcp_drop(sk, skb1);
}
add_sack:
if (tcp_is_sack(tp))
tcp_sack_new_ofo_skb(sk, seq, end_seq);
end:
if (skb) {
tcp_grow_window(sk, skb);
skb_set_owner_r(skb, sk);
}
}
static int __must_check tcp_queue_rcv(struct sock *sk, struct sk_buff *skb, int hdrlen,
bool *fragstolen)
{
int eaten;
struct sk_buff *tail = skb_peek_tail(&sk->sk_receive_queue);
__skb_pull(skb, hdrlen);
eaten = (tail &&
tcp_try_coalesce(sk, tail, skb, fragstolen)) ? 1 : 0;
tcp_rcv_nxt_update(tcp_sk(sk), TCP_SKB_CB(skb)->end_seq);
if (!eaten) {
__skb_queue_tail(&sk->sk_receive_queue, skb);
skb_set_owner_r(skb, sk);
}
return eaten;
}
int tcp_send_rcvq(struct sock *sk, struct msghdr *msg, size_t size)
{
struct sk_buff *skb;
int err = -ENOMEM;
int data_len = 0;
bool fragstolen;
if (size == 0)
return 0;
if (size > PAGE_SIZE) {
int npages = min_t(size_t, size >> PAGE_SHIFT, MAX_SKB_FRAGS);
data_len = npages << PAGE_SHIFT;
size = data_len + (size & ~PAGE_MASK);
}
skb = alloc_skb_with_frags(size - data_len, data_len,
PAGE_ALLOC_COSTLY_ORDER,
&err, sk->sk_allocation);
if (!skb)
goto err;
skb_put(skb, size - data_len);
skb->data_len = data_len;
skb->len = size;
if (tcp_try_rmem_schedule(sk, skb, skb->truesize))
netvm: prevent a stream-specific deadlock This patch series is based on top of "Swap-over-NBD without deadlocking v15" as it depends on the same reservation of PF_MEMALLOC reserves logic. When a user or administrator requires swap for their application, they create a swap partition and file, format it with mkswap and activate it with swapon. In diskless systems this is not an option so if swap if required then swapping over the network is considered. The two likely scenarios are when blade servers are used as part of a cluster where the form factor or maintenance costs do not allow the use of disks and thin clients. The Linux Terminal Server Project recommends the use of the Network Block Device (NBD) for swap but this is not always an option. There is no guarantee that the network attached storage (NAS) device is running Linux or supports NBD. However, it is likely that it supports NFS so there are users that want support for swapping over NFS despite any performance concern. Some distributions currently carry patches that support swapping over NFS but it would be preferable to support it in the mainline kernel. Patch 1 avoids a stream-specific deadlock that potentially affects TCP. Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC reserves. Patch 3 adds three helpers for filesystems to handle swap cache pages. For example, page_file_mapping() returns page->mapping for file-backed pages and the address_space of the underlying swap file for swap cache pages. Patch 4 adds two address_space_operations to allow a filesystem to pin all metadata relevant to a swapfile in memory. Upon successful activation, the swapfile is marked SWP_FILE and the address space operation ->direct_IO is used for writing and ->readpage for reading in swap pages. Patch 5 notes that patch 3 is bolting filesystem-specific-swapfile-support onto the side and that the default handlers have different information to what is available to the filesystem. This patch refactors the code so that there are generic handlers for each of the new address_space operations. Patch 6 adds an API to allow a vector of kernel addresses to be translated to struct pages and pinned for IO. Patch 7 adds support for using highmem pages for swap by kmapping the pages before calling the direct_IO handler. Patch 8 updates NFS to use the helpers from patch 3 where necessary. Patch 9 avoids setting PF_private on PG_swapcache pages within NFS. Patch 10 implements the new swapfile-related address_space operations for NFS and teaches the direct IO handler how to manage kernel addresses. Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO where appropriate. Patch 12 fixes a NULL pointer dereference that occurs when using swap-over-NFS. With the patches applied, it is possible to mount a swapfile that is on an NFS filesystem. Swap performance is not great with a swap stress test taking roughly twice as long to complete than if the swap device was backed by NBD. This patch: netvm: prevent a stream-specific deadlock It could happen that all !SOCK_MEMALLOC sockets have buffered so much data that we're over the global rmem limit. This will prevent SOCK_MEMALLOC buffers from receiving data, which will prevent userspace from running, which is needed to reduce the buffered data. Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit. Once this change it applied, it is important that sockets that set SOCK_MEMALLOC do not clear the flag until the socket is being torn down. If this happens, a warning is generated and the tokens reclaimed to avoid accounting errors until the bug is fixed. [davem@davemloft.net: Warning about clearing SOCK_MEMALLOC] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rik van Riel <riel@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:41 +00:00
goto err_free;
err = skb_copy_datagram_from_iter(skb, 0, &msg->msg_iter, size);
if (err)
goto err_free;
TCP_SKB_CB(skb)->seq = tcp_sk(sk)->rcv_nxt;
TCP_SKB_CB(skb)->end_seq = TCP_SKB_CB(skb)->seq + size;
TCP_SKB_CB(skb)->ack_seq = tcp_sk(sk)->snd_una - 1;
if (tcp_queue_rcv(sk, skb, 0, &fragstolen)) {
WARN_ON_ONCE(fragstolen); /* should not happen */
__kfree_skb(skb);
}
return size;
err_free:
kfree_skb(skb);
err:
return err;
}
static void tcp_data_queue(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
bool fragstolen = false;
int eaten = -1;
if (TCP_SKB_CB(skb)->seq == TCP_SKB_CB(skb)->end_seq) {
__kfree_skb(skb);
return;
}
skb_dst_drop(skb);
__skb_pull(skb, tcp_hdr(skb)->doff * 4);
tcp_ecn_accept_cwr(tp, skb);
tp->rx_opt.dsack = 0;
/* Queue data for delivery to the user.
* Packets in sequence go to the receive queue.
* Out of sequence packets to the out_of_order_queue.
*/
if (TCP_SKB_CB(skb)->seq == tp->rcv_nxt) {
if (tcp_receive_window(tp) == 0)
goto out_of_window;
/* Ok. In sequence. In window. */
if (tp->ucopy.task == current &&
tp->copied_seq == tp->rcv_nxt && tp->ucopy.len &&
sock_owned_by_user(sk) && !tp->urg_data) {
int chunk = min_t(unsigned int, skb->len,
tp->ucopy.len);
__set_current_state(TASK_RUNNING);
if (!skb_copy_datagram_msg(skb, 0, tp->ucopy.msg, chunk)) {
tp->ucopy.len -= chunk;
tp->copied_seq += chunk;
TCP: fix a bug that triggers large number of TCP RST by mistake This patch fixes a bug that causes TCP RST packets to be generated on otherwise correctly behaved applications, e.g., no unread data on close,..., etc. To trigger the bug, at least two conditions must be met: 1. The FIN flag is set on the last data packet, i.e., it's not on a separate, FIN only packet. 2. The size of the last data chunk on the receive side matches exactly with the size of buffer posted by the receiver, and the receiver closes the socket without any further read attempt. This bug was first noticed on our netperf based testbed for our IW10 proposal to IETF where a large number of RST packets were observed. netperf's read side code meets the condition 2 above 100%. Before the fix, tcp_data_queue() will queue the last skb that meets condition 1 to sk_receive_queue even though it has fully copied out (skb_copy_datagram_iovec()) the data. Then if condition 2 is also met, tcp_recvmsg() often returns all the copied out data successfully without actually consuming the skb, due to a check "if ((chunk = len - tp->ucopy.len) != 0) {" and "len -= chunk;" after tcp_prequeue_process() that causes "len" to become 0 and an early exit from the big while loop. I don't see any reason not to free the skb whose data have been fully consumed in tcp_data_queue(), regardless of the FIN flag. We won't get there if MSG_PEEK is on. Am I missing some arcane cases related to urgent data? Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25 21:46:30 +00:00
eaten = (chunk == skb->len);
tcp_rcv_space_adjust(sk);
}
}
if (eaten <= 0) {
queue_and_out:
if (eaten < 0) {
if (skb_queue_len(&sk->sk_receive_queue) == 0)
sk_forced_mem_schedule(sk, skb->truesize);
else if (tcp_try_rmem_schedule(sk, skb, skb->truesize))
goto drop;
}
eaten = tcp_queue_rcv(sk, skb, 0, &fragstolen);
}
tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq);
if (skb->len)
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_event_data_recv(sk, skb);
if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
tcp_fin(sk);
if (!skb_queue_empty(&tp->out_of_order_queue)) {
tcp_ofo_queue(sk);
/* RFC2581. 4.2. SHOULD send immediate ACK, when
* gap in queue is filled.
*/
if (skb_queue_empty(&tp->out_of_order_queue))
inet_csk(sk)->icsk_ack.pingpong = 0;
}
if (tp->rx_opt.num_sacks)
tcp_sack_remove(tp);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_fast_path_check(sk);
if (eaten > 0)
kfree_skb_partial(skb, fragstolen);
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_data_ready(sk);
return;
}
if (!after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) {
/* A retransmit, 2nd most common case. Force an immediate ack. */
NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
tcp_dsack_set(sk, TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq);
out_of_window:
tcp_enter_quickack_mode(sk);
inet_csk_schedule_ack(sk);
drop:
tcp_drop(sk, skb);
return;
}
/* Out of window. F.e. zero window probe. */
if (!before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt + tcp_receive_window(tp)))
goto out_of_window;
tcp_enter_quickack_mode(sk);
if (before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
/* Partial packet, seq < rcv_next < end_seq */
SOCK_DEBUG(sk, "partial packet: rcv_next %X seq %X - %X\n",
tp->rcv_nxt, TCP_SKB_CB(skb)->seq,
TCP_SKB_CB(skb)->end_seq);
tcp_dsack_set(sk, TCP_SKB_CB(skb)->seq, tp->rcv_nxt);
/* If window is closed, drop tail of packet. But after
* remembering D-SACK for its head made in previous line.
*/
if (!tcp_receive_window(tp))
goto out_of_window;
goto queue_and_out;
}
tcp_data_queue_ofo(sk, skb);
}
static struct sk_buff *tcp_collapse_one(struct sock *sk, struct sk_buff *skb,
struct sk_buff_head *list)
{
struct sk_buff *next = NULL;
if (!skb_queue_is_last(list, skb))
next = skb_queue_next(list, skb);
__skb_unlink(skb, list);
__kfree_skb(skb);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPRCVCOLLAPSED);
return next;
}
/* Collapse contiguous sequence of skbs head..tail with
* sequence numbers start..end.
*
* If tail is NULL, this means until the end of the list.
*
* Segments with FIN/SYN are not collapsed (only because this
* simplifies code)
*/
static void
tcp_collapse(struct sock *sk, struct sk_buff_head *list,
struct sk_buff *head, struct sk_buff *tail,
u32 start, u32 end)
{
struct sk_buff *skb, *n;
bool end_of_skbs;
/* First, check that queue is collapsible and find
* the point where collapsing can be useful. */
skb = head;
restart:
end_of_skbs = true;
skb_queue_walk_from_safe(list, skb, n) {
if (skb == tail)
break;
/* No new bits? It is possible on ofo queue. */
if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
skb = tcp_collapse_one(sk, skb, list);
if (!skb)
break;
goto restart;
}
/* The first skb to collapse is:
* - not SYN/FIN and
* - bloated or contains data before "start" or
* overlaps to the next one.
*/
if (!(TCP_SKB_CB(skb)->tcp_flags & (TCPHDR_SYN | TCPHDR_FIN)) &&
(tcp_win_from_space(skb->truesize) > skb->len ||
before(TCP_SKB_CB(skb)->seq, start))) {
end_of_skbs = false;
break;
}
if (!skb_queue_is_last(list, skb)) {
struct sk_buff *next = skb_queue_next(list, skb);
if (next != tail &&
TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(next)->seq) {
end_of_skbs = false;
break;
}
}
/* Decided to skip this, advance start seq. */
start = TCP_SKB_CB(skb)->end_seq;
}
if (end_of_skbs ||
(TCP_SKB_CB(skb)->tcp_flags & (TCPHDR_SYN | TCPHDR_FIN)))
return;
while (before(start, end)) {
int copy = min_t(int, SKB_MAX_ORDER(0, 0), end - start);
struct sk_buff *nskb;
nskb = alloc_skb(copy, GFP_ATOMIC);
if (!nskb)
return;
memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
TCP_SKB_CB(nskb)->seq = TCP_SKB_CB(nskb)->end_seq = start;
__skb_queue_before(list, skb, nskb);
[NET] CORE: Introducing new memory accounting interface. This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 08:11:19 +00:00
skb_set_owner_r(nskb, sk);
/* Copy data, releasing collapsed skbs. */
while (copy > 0) {
int offset = start - TCP_SKB_CB(skb)->seq;
int size = TCP_SKB_CB(skb)->end_seq - start;
BUG_ON(offset < 0);
if (size > 0) {
size = min(copy, size);
if (skb_copy_bits(skb, offset, skb_put(nskb, size), size))
BUG();
TCP_SKB_CB(nskb)->end_seq += size;
copy -= size;
start += size;
}
if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
skb = tcp_collapse_one(sk, skb, list);
if (!skb ||
skb == tail ||
(TCP_SKB_CB(skb)->tcp_flags & (TCPHDR_SYN | TCPHDR_FIN)))
return;
}
}
}
}
/* Collapse ofo queue. Algorithm: select contiguous sequence of skbs
* and tcp_collapse() them until all the queue is collapsed.
*/
static void tcp_collapse_ofo_queue(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb = skb_peek(&tp->out_of_order_queue);
struct sk_buff *head;
u32 start, end;
if (!skb)
return;
start = TCP_SKB_CB(skb)->seq;
end = TCP_SKB_CB(skb)->end_seq;
head = skb;
for (;;) {
struct sk_buff *next = NULL;
if (!skb_queue_is_last(&tp->out_of_order_queue, skb))
next = skb_queue_next(&tp->out_of_order_queue, skb);
skb = next;
/* Segment is terminated when we see gap or when
* we are at the end of all the queue. */
if (!skb ||
after(TCP_SKB_CB(skb)->seq, end) ||
before(TCP_SKB_CB(skb)->end_seq, start)) {
tcp_collapse(sk, &tp->out_of_order_queue,
head, skb, start, end);
head = skb;
if (!skb)
break;
/* Start new segment */
start = TCP_SKB_CB(skb)->seq;
end = TCP_SKB_CB(skb)->end_seq;
} else {
if (before(TCP_SKB_CB(skb)->seq, start))
start = TCP_SKB_CB(skb)->seq;
if (after(TCP_SKB_CB(skb)->end_seq, end))
end = TCP_SKB_CB(skb)->end_seq;
}
}
}
/*
* Purge the out-of-order queue.
* Return true if queue was pruned.
*/
static bool tcp_prune_ofo_queue(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
bool res = false;
if (!skb_queue_empty(&tp->out_of_order_queue)) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_OFOPRUNED);
__skb_queue_purge(&tp->out_of_order_queue);
/* Reset SACK state. A conforming SACK implementation will
* do the same at a timeout based retransmit. When a connection
* is in a sad state like this, we care only about integrity
* of the connection not performance.
*/
if (tp->rx_opt.sack_ok)
tcp_sack_reset(&tp->rx_opt);
sk_mem_reclaim(sk);
res = true;
}
return res;
}
/* Reduce allocated memory if we can, trying to get
* the socket within its memory limits again.
*
* Return less than zero if we should start dropping frames
* until the socket owning process reads some of the data
* to stabilize the situation.
*/
static int tcp_prune_queue(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
SOCK_DEBUG(sk, "prune_queue: c=%x\n", tp->copied_seq);
NET_INC_STATS(sock_net(sk), LINUX_MIB_PRUNECALLED);
if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_clamp_window(sk);
else if (tcp_under_memory_pressure(sk))
tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss);
tcp_collapse_ofo_queue(sk);
if (!skb_queue_empty(&sk->sk_receive_queue))
tcp_collapse(sk, &sk->sk_receive_queue,
skb_peek(&sk->sk_receive_queue),
NULL,
tp->copied_seq, tp->rcv_nxt);
[NET] CORE: Introducing new memory accounting interface. This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 08:11:19 +00:00
sk_mem_reclaim(sk);
if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf)
return 0;
/* Collapsing did not help, destructive actions follow.
* This must not ever occur. */
tcp_prune_ofo_queue(sk);
if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf)
return 0;
/* If we are really being abused, tell the caller to silently
* drop receive data on the floor. It will get retransmitted
* and hopefully then we'll have sufficient space.
*/
NET_INC_STATS(sock_net(sk), LINUX_MIB_RCVPRUNED);
/* Massive buffer overcommit. */
tp->pred_flags = 0;
return -1;
}
static bool tcp_should_expand_sndbuf(const struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
/* If the user specified a specific send buffer setting, do
* not modify it.
*/
if (sk->sk_userlocks & SOCK_SNDBUF_LOCK)
return false;
/* If we are under global TCP memory pressure, do not expand. */
if (tcp_under_memory_pressure(sk))
return false;
/* If we are under soft global TCP memory pressure, do not expand. */
if (sk_memory_allocated(sk) >= sk_prot_mem_limits(sk, 0))
return false;
/* If we filled the congestion window, do not expand. */
if (tcp_packets_in_flight(tp) >= tp->snd_cwnd)
return false;
return true;
}
/* When incoming ACK allowed to free some skb from write_queue,
* we remember this event in flag SOCK_QUEUE_SHRUNK and wake up socket
* on the exit from tcp input handler.
*
* PROBLEM: sndbuf expansion does not work well with largesend.
*/
static void tcp_new_space(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
if (tcp_should_expand_sndbuf(sk)) {
tcp_sndbuf_expand(sk);
tp->snd_cwnd_stamp = tcp_time_stamp;
}
sk->sk_write_space(sk);
}
static void tcp_check_space(struct sock *sk)
{
if (sock_flag(sk, SOCK_QUEUE_SHRUNK)) {
sock_reset_flag(sk, SOCK_QUEUE_SHRUNK);
/* pairs with tcp_poll() */
smp_mb__after_atomic();
if (sk->sk_socket &&
test_bit(SOCK_NOSPACE, &sk->sk_socket->flags))
tcp_new_space(sk);
}
}
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
static inline void tcp_data_snd_check(struct sock *sk)
{
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_push_pending_frames(sk);
tcp_check_space(sk);
}
/*
* Check if sending an ack is needed.
*/
static void __tcp_ack_snd_check(struct sock *sk, int ofo_possible)
{
struct tcp_sock *tp = tcp_sk(sk);
/* More than one full frame received... */
if (((tp->rcv_nxt - tp->rcv_wup) > inet_csk(sk)->icsk_ack.rcv_mss &&
/* ... and right edge of window advances far enough.
* (tcp_recvmsg() will send ACK otherwise). Or...
*/
__tcp_select_window(sk) >= tp->rcv_wnd) ||
/* We ACK each frame or... */
tcp_in_quickack_mode(sk) ||
/* We have out of order data. */
(ofo_possible && skb_peek(&tp->out_of_order_queue))) {
/* Then ack it now */
tcp_send_ack(sk);
} else {
/* Else, send delayed ack. */
tcp_send_delayed_ack(sk);
}
}
static inline void tcp_ack_snd_check(struct sock *sk)
{
if (!inet_csk_ack_scheduled(sk)) {
/* We sent a data segment already. */
return;
}
__tcp_ack_snd_check(sk, 1);
}
/*
* This routine is only called when we have urgent data
* signaled. Its the 'slow' part of tcp_urg. It could be
* moved inline now as tcp_urg is only called from one
* place. We handle URGent data wrong. We have to - as
* BSD still doesn't use the correction from RFC961.
* For 1003.1g we should support a new option TCP_STDURG to permit
* either form (or just set the sysctl tcp_stdurg).
*/
static void tcp_check_urg(struct sock *sk, const struct tcphdr *th)
{
struct tcp_sock *tp = tcp_sk(sk);
u32 ptr = ntohs(th->urg_ptr);
if (ptr && !sysctl_tcp_stdurg)
ptr--;
ptr += ntohl(th->seq);
/* Ignore urgent data that we've already seen and read. */
if (after(tp->copied_seq, ptr))
return;
/* Do not replay urg ptr.
*
* NOTE: interesting situation not covered by specs.
* Misbehaving sender may send urg ptr, pointing to segment,
* which we already have in ofo queue. We are not able to fetch
* such data and will stay in TCP_URG_NOTYET until will be eaten
* by recvmsg(). Seems, we are not obliged to handle such wicked
* situations. But it is worth to think about possibility of some
* DoSes using some hypothetical application level deadlock.
*/
if (before(ptr, tp->rcv_nxt))
return;
/* Do we already have a newer (or duplicate) urgent pointer? */
if (tp->urg_data && !after(ptr, tp->urg_seq))
return;
/* Tell the world about our new urgent pointer. */
sk_send_sigurg(sk);
/* We may be adding urgent data when the last byte read was
* urgent. To do this requires some care. We cannot just ignore
* tp->copied_seq since we would read the last urgent byte again
* as data, nor can we alter copied_seq until this data arrives
* or we break the semantics of SIOCATMARK (and thus sockatmark())
*
* NOTE. Double Dutch. Rendering to plain English: author of comment
* above did something sort of send("A", MSG_OOB); send("B", MSG_OOB);
* and expect that both A and B disappear from stream. This is _wrong_.
* Though this happens in BSD with high probability, this is occasional.
* Any application relying on this is buggy. Note also, that fix "works"
* only in this artificial test. Insert some normal data between A and B and we will
* decline of BSD again. Verdict: it is better to remove to trap
* buggy users.
*/
if (tp->urg_seq == tp->copied_seq && tp->urg_data &&
!sock_flag(sk, SOCK_URGINLINE) && tp->copied_seq != tp->rcv_nxt) {
struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
tp->copied_seq++;
if (skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq)) {
__skb_unlink(skb, &sk->sk_receive_queue);
__kfree_skb(skb);
}
}
tp->urg_data = TCP_URG_NOTYET;
tp->urg_seq = ptr;
/* Disable header prediction. */
tp->pred_flags = 0;
}
/* This is the 'fast' part of urgent handling. */
static void tcp_urg(struct sock *sk, struct sk_buff *skb, const struct tcphdr *th)
{
struct tcp_sock *tp = tcp_sk(sk);
/* Check if we get a new urgent pointer - normally not. */
if (th->urg)
tcp_check_urg(sk, th);
/* Do we wait for any urgent data? - normally not... */
if (tp->urg_data == TCP_URG_NOTYET) {
u32 ptr = tp->urg_seq - ntohl(th->seq) + (th->doff * 4) -
th->syn;
/* Is the urgent pointer pointing into this packet? */
if (ptr < skb->len) {
u8 tmp;
if (skb_copy_bits(skb, ptr, &tmp, 1))
BUG();
tp->urg_data = TCP_URG_VALID | tmp;
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_data_ready(sk);
}
}
}
static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen)
{
struct tcp_sock *tp = tcp_sk(sk);
int chunk = skb->len - hlen;
int err;
if (skb_csum_unnecessary(skb))
err = skb_copy_datagram_msg(skb, hlen, tp->ucopy.msg, chunk);
else
err = skb_copy_and_csum_datagram_msg(skb, hlen, tp->ucopy.msg);
if (!err) {
tp->ucopy.len -= chunk;
tp->copied_seq += chunk;
tcp_rcv_space_adjust(sk);
}
return err;
}
/* Does PAWS and seqno based validation of an incoming segment, flags will
* play significant role here.
*/
static bool tcp_validate_incoming(struct sock *sk, struct sk_buff *skb,
const struct tcphdr *th, int syn_inerr)
{
struct tcp_sock *tp = tcp_sk(sk);
/* RFC1323: H1. Apply PAWS check first. */
if (tcp_fast_parse_options(skb, th, tp) && tp->rx_opt.saw_tstamp &&
tcp_paws_discard(sk, skb)) {
if (!th->rst) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
if (!tcp_oow_rate_limited(sock_net(sk), skb,
LINUX_MIB_TCPACKSKIPPEDPAWS,
&tp->last_oow_ack_time))
tcp_send_dupack(sk, skb);
goto discard;
}
/* Reset is accepted even if it did not pass PAWS. */
}
/* Step 1: check sequence number */
if (!tcp_sequence(tp, TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq)) {
/* RFC793, page 37: "In all states except SYN-SENT, all reset
* (RST) segments are validated by checking their SEQ-fields."
* And page 69: "If an incoming segment is not acceptable,
* an acknowledgment should be sent in reply (unless the RST
* bit is set, if so drop the segment and return)".
*/
if (!th->rst) {
if (th->syn)
goto syn_challenge;
if (!tcp_oow_rate_limited(sock_net(sk), skb,
LINUX_MIB_TCPACKSKIPPEDSEQ,
&tp->last_oow_ack_time))
tcp_send_dupack(sk, skb);
}
goto discard;
}
/* Step 2: check RST bit */
if (th->rst) {
/* RFC 5961 3.2 :
* If sequence number exactly matches RCV.NXT, then
* RESET the connection
* else
* Send a challenge ACK
*/
if (TCP_SKB_CB(skb)->seq == tp->rcv_nxt)
tcp_reset(sk);
else
tcp_send_challenge_ack(sk, skb);
goto discard;
}
/* step 3: check security and precedence [ignored] */
/* step 4: Check for a SYN
* RFC 5961 4.2 : Send a challenge ack
*/
if (th->syn) {
syn_challenge:
if (syn_inerr)
TCP_INC_STATS(sock_net(sk), TCP_MIB_INERRS);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSYNCHALLENGE);
tcp_send_challenge_ack(sk, skb);
goto discard;
}
return true;
discard:
tcp_drop(sk, skb);
return false;
}
/*
* TCP receive function for the ESTABLISHED state.
*
* It is split into a fast path and a slow path. The fast path is
* disabled when:
* - A zero window was announced from us - zero window probing
* is only handled properly in the slow path.
* - Out of order segments arrived.
* - Urgent data is expected.
* - There is no buffer space left
* - Unexpected TCP flags/window values/header lengths are received
* (detected by checking the TCP header against pred_flags)
* - Data is sent in both directions. Fast path only supports pure senders
* or pure receivers (this means either the sequence number or the ack
* value must stay constant)
* - Unexpected TCP option.
*
* When these conditions are not satisfied it drops into a standard
* receive procedure patterned after RFC793 to handle all cases.
* The first three cases are guaranteed by proper pred_flags setting,
* the rest is checked inline. Fast processing is turned on in
* tcp_data_queue when everything is OK.
*/
void tcp_rcv_established(struct sock *sk, struct sk_buff *skb,
const struct tcphdr *th, unsigned int len)
{
struct tcp_sock *tp = tcp_sk(sk);
if (unlikely(!sk->sk_rx_dst))
inet_csk(sk)->icsk_af_ops->sk_rx_dst_set(sk, skb);
/*
* Header prediction.
* The code loosely follows the one in the famous
* "30 instruction TCP receive" Van Jacobson mail.
*
* Van's trick is to deposit buffers into socket queue
* on a device interrupt, to call tcp_recv function
* on the receive process context and checksum and copy
* the buffer to user space. smart...
*
* Our current scheme is not silly either but we take the
* extra cost of the net_bh soft interrupt processing...
* We do checksum and copy also but from device to kernel.
*/
tp->rx_opt.saw_tstamp = 0;
/* pred_flags is 0xS?10 << 16 + snd_wnd
* if header_prediction is to be made
* 'S' will always be tp->tcp_header_len >> 2
* '?' will be 0 for the fast path, otherwise pred_flags is 0 to
* turn it off (when there are holes in the receive
* space for instance)
* PSH flag is ignored.
*/
if ((tcp_flag_word(th) & TCP_HP_BITS) == tp->pred_flags &&
TCP_SKB_CB(skb)->seq == tp->rcv_nxt &&
!after(TCP_SKB_CB(skb)->ack_seq, tp->snd_nxt)) {
int tcp_header_len = tp->tcp_header_len;
/* Timestamp header prediction: tcp_header_len
* is automatically equal to th->doff*4 due to pred_flags
* match.
*/
/* Check timestamp */
if (tcp_header_len == sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED) {
/* No? Slow path! */
if (!tcp_parse_aligned_timestamp(tp, th))
goto slow_path;
/* If PAWS failed, check it more carefully in slow path */
if ((s32)(tp->rx_opt.rcv_tsval - tp->rx_opt.ts_recent) < 0)
goto slow_path;
/* DO NOT update ts_recent here, if checksum fails
* and timestamp was corrupted part, it will result
* in a hung connection since we will drop all
* future packets due to the PAWS test.
*/
}
if (len <= tcp_header_len) {
/* Bulk data transfer: sender */
if (len == tcp_header_len) {
/* Predicted packet is in window by definition.
* seq == rcv_nxt and rcv_wup <= rcv_nxt.
* Hence, check seq<=rcv_wup reduces to:
*/
if (tcp_header_len ==
(sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED) &&
tp->rcv_nxt == tp->rcv_wup)
tcp_store_ts_recent(tp);
/* We know that such packets are checksummed
* on entry.
*/
tcp_ack(sk, skb, 0);
__kfree_skb(skb);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_data_snd_check(sk);
return;
} else { /* Header too small */
TCP_INC_STATS(sock_net(sk), TCP_MIB_INERRS);
goto discard;
}
} else {
int eaten = 0;
bool fragstolen = false;
if (tp->ucopy.task == current &&
tp->copied_seq == tp->rcv_nxt &&
len - tcp_header_len <= tp->ucopy.len &&
sock_owned_by_user(sk)) {
__set_current_state(TASK_RUNNING);
if (!tcp_copy_to_iovec(sk, skb, tcp_header_len)) {
/* Predicted packet is in window by definition.
* seq == rcv_nxt and rcv_wup <= rcv_nxt.
* Hence, check seq<=rcv_wup reduces to:
*/
if (tcp_header_len ==
(sizeof(struct tcphdr) +
TCPOLEN_TSTAMP_ALIGNED) &&
tp->rcv_nxt == tp->rcv_wup)
tcp_store_ts_recent(tp);
tcp_rcv_rtt_measure_ts(sk, skb);
__skb_pull(skb, tcp_header_len);
tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq);
NET_INC_STATS(sock_net(sk),
LINUX_MIB_TCPHPHITSTOUSER);
eaten = 1;
}
}
if (!eaten) {
if (tcp_checksum_complete(skb))
goto csum_error;
if ((int)skb->truesize > sk->sk_forward_alloc)
goto step5;
/* Predicted packet is in window by definition.
* seq == rcv_nxt and rcv_wup <= rcv_nxt.
* Hence, check seq<=rcv_wup reduces to:
*/
if (tcp_header_len ==
(sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED) &&
tp->rcv_nxt == tp->rcv_wup)
tcp_store_ts_recent(tp);
tcp_rcv_rtt_measure_ts(sk, skb);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPHPHITS);
/* Bulk data transfer: receiver */
eaten = tcp_queue_rcv(sk, skb, tcp_header_len,
&fragstolen);
}
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_event_data_recv(sk, skb);
if (TCP_SKB_CB(skb)->ack_seq != tp->snd_una) {
/* Well, only one small jumplet in fast path... */
tcp_ack(sk, skb, FLAG_DATA);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_data_snd_check(sk);
if (!inet_csk_ack_scheduled(sk))
goto no_ack;
}
__tcp_ack_snd_check(sk, 0);
no_ack:
if (eaten)
kfree_skb_partial(skb, fragstolen);
sk->sk_data_ready(sk);
return;
}
}
slow_path:
if (len < (th->doff << 2) || tcp_checksum_complete(skb))
goto csum_error;
tcp: Restore RFC5961-compliant behavior for SYN packets Commit c3ae62af8e755 ("tcp: should drop incoming frames without ACK flag set") was created to mitigate a security vulnerability in which a local attacker is able to inject data into locally-opened sockets by using TCP protocol statistics in procfs to quickly find the correct sequence number. This broke the RFC5961 requirement to send a challenge ACK in response to spurious RST packets, which was subsequently fixed by commit 7b514a886ba50 ("tcp: accept RST without ACK flag"). Unfortunately, the RFC5961 requirement that spurious SYN packets be handled in a similar manner remains broken. RFC5961 section 4 states that: ... the handling of the SYN in the synchronized state SHOULD be performed as follows: 1) If the SYN bit is set, irrespective of the sequence number, TCP MUST send an ACK (also referred to as challenge ACK) to the remote peer: <SEQ=SND.NXT><ACK=RCV.NXT><CTL=ACK> After sending the acknowledgment, TCP MUST drop the unacceptable segment and stop processing further. By sending an ACK, the remote peer is challenged to confirm the loss of the previous connection and the request to start a new connection. A legitimate peer, after restart, would not have a TCB in the synchronized state. Thus, when the ACK arrives, the peer should send a RST segment back with the sequence number derived from the ACK field that caused the RST. This RST will confirm that the remote peer has indeed closed the previous connection. Upon receipt of a valid RST, the local TCP endpoint MUST terminate its connection. The local TCP endpoint should then rely on SYN retransmission from the remote end to re-establish the connection. This patch lets SYN packets through the discard added in c3ae62af8e755, so that spurious SYN packets are properly dealt with as per the RFC. The challenge ACK is sent unconditionally and is rate-limited, so the original vulnerability is not reintroduced by this patch. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 23:09:53 +00:00
if (!th->ack && !th->rst && !th->syn)
goto discard;
/*
* Standard slow path.
*/
if (!tcp_validate_incoming(sk, skb, th, 1))
return;
step5:
if (tcp_ack(sk, skb, FLAG_SLOWPATH | FLAG_UPDATE_TS_RECENT) < 0)
goto discard;
tcp_rcv_rtt_measure_ts(sk, skb);
/* Process urgent data. */
tcp_urg(sk, skb, th);
/* step 7: process the segment text */
tcp_data_queue(sk, skb);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_data_snd_check(sk);
tcp_ack_snd_check(sk);
return;
csum_error:
TCP_INC_STATS(sock_net(sk), TCP_MIB_CSUMERRORS);
TCP_INC_STATS(sock_net(sk), TCP_MIB_INERRS);
discard:
tcp_drop(sk, skb);
}
EXPORT_SYMBOL(tcp_rcv_established);
void tcp_finish_connect(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
tcp_set_state(sk, TCP_ESTABLISHED);
if (skb) {
icsk->icsk_af_ops->sk_rx_dst_set(sk, skb);
security_inet_conn_established(sk, skb);
}
/* Make sure socket is routed, for correct metrics. */
icsk->icsk_af_ops->rebuild_header(sk);
tcp_init_metrics(sk);
tcp_init_congestion_control(sk);
/* Prevent spurious tcp_cwnd_restart() on first data
* packet.
*/
tp->lsndtime = tcp_time_stamp;
tcp_init_buffer_space(sk);
if (sock_flag(sk, SOCK_KEEPOPEN))
inet_csk_reset_keepalive_timer(sk, keepalive_time_when(tp));
if (!tp->rx_opt.snd_wscale)
__tcp_fast_path_on(tp, tp->snd_wnd);
else
tp->pred_flags = 0;
if (!sock_flag(sk, SOCK_DEAD)) {
sk->sk_state_change(sk);
sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT);
}
}
static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack,
struct tcp_fastopen_cookie *cookie)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *data = tp->syn_data ? tcp_write_queue_head(sk) : NULL;
u16 mss = tp->rx_opt.mss_clamp, try_exp = 0;
bool syn_drop = false;
if (mss == tp->rx_opt.user_mss) {
struct tcp_options_received opt;
/* Get original SYNACK MSS value if user MSS sets mss_clamp */
tcp_clear_options(&opt);
opt.user_mss = opt.mss_clamp = 0;
tcp_parse_options(synack, &opt, 0, NULL);
mss = opt.mss_clamp;
}
if (!tp->syn_fastopen) {
/* Ignore an unsolicited cookie */
cookie->len = -1;
} else if (tp->total_retrans) {
/* SYN timed out and the SYN-ACK neither has a cookie nor
* acknowledges data. Presumably the remote received only
* the retransmitted (regular) SYNs: either the original
* SYN-data or the corresponding SYN-ACK was dropped.
*/
syn_drop = (cookie->len < 0 && data);
} else if (cookie->len < 0 && !tp->syn_data) {
/* We requested a cookie but didn't get it. If we did not use
* the (old) exp opt format then try so next time (try_exp=1).
* Otherwise we go back to use the RFC7413 opt (try_exp=2).
*/
try_exp = tp->syn_fastopen_exp ? 2 : 1;
}
tcp_fastopen_cache_set(sk, mss, cookie, syn_drop, try_exp);
if (data) { /* Retransmit unacked data in SYN */
tcp_for_write_queue_from(data, sk) {
if (data == tcp_send_head(sk) ||
__tcp_retransmit_skb(sk, data, 1))
break;
}
tcp_rearm_rto(sk);
NET_INC_STATS(sock_net(sk),
LINUX_MIB_TCPFASTOPENACTIVEFAIL);
return true;
}
tp->syn_data_acked = tp->syn_data;
if (tp->syn_data_acked)
NET_INC_STATS(sock_net(sk),
LINUX_MIB_TCPFASTOPENACTIVE);
tcp_fastopen_add_skb(sk, synack);
return false;
}
static int tcp_rcv_synsent_state_process(struct sock *sk, struct sk_buff *skb,
const struct tcphdr *th)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_fastopen_cookie foc = { .len = -1 };
int saved_clamp = tp->rx_opt.mss_clamp;
tcp_parse_options(skb, &tp->rx_opt, 0, &foc);
if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr)
tp->rx_opt.rcv_tsecr -= tp->tsoffset;
if (th->ack) {
/* rfc793:
* "If the state is SYN-SENT then
* first check the ACK bit
* If the ACK bit is set
* If SEG.ACK =< ISS, or SEG.ACK > SND.NXT, send
* a reset (unless the RST bit is set, if so drop
* the segment and return)"
*/
if (!after(TCP_SKB_CB(skb)->ack_seq, tp->snd_una) ||
after(TCP_SKB_CB(skb)->ack_seq, tp->snd_nxt))
goto reset_and_undo;
if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr &&
!between(tp->rx_opt.rcv_tsecr, tp->retrans_stamp,
tcp_time_stamp)) {
NET_INC_STATS(sock_net(sk),
LINUX_MIB_PAWSACTIVEREJECTED);
goto reset_and_undo;
}
/* Now ACK is acceptable.
*
* "If the RST bit is set
* If the ACK was acceptable then signal the user "error:
* connection reset", drop the segment, enter CLOSED state,
* delete TCB, and return."
*/
if (th->rst) {
tcp_reset(sk);
goto discard;
}
/* rfc793:
* "fifth, if neither of the SYN or RST bits is set then
* drop the segment and return."
*
* See note below!
* --ANK(990513)
*/
if (!th->syn)
goto discard_and_undo;
/* rfc793:
* "If the SYN bit is on ...
* are acceptable then ...
* (our SYN has been ACKed), change the connection
* state to ESTABLISHED..."
*/
tcp_ecn_rcv_synack(tp, th);
tcp_init_wl(tp, TCP_SKB_CB(skb)->seq);
tcp_ack(sk, skb, FLAG_SLOWPATH);
/* Ok.. it's good. Set up sequence numbers and
* move to established.
*/
tp->rcv_nxt = TCP_SKB_CB(skb)->seq + 1;
tp->rcv_wup = TCP_SKB_CB(skb)->seq + 1;
/* RFC1323: The window in SYN & SYN/ACK segments is
* never scaled.
*/
tp->snd_wnd = ntohs(th->window);
if (!tp->rx_opt.wscale_ok) {
tp->rx_opt.snd_wscale = tp->rx_opt.rcv_wscale = 0;
tp->window_clamp = min(tp->window_clamp, 65535U);
}
if (tp->rx_opt.saw_tstamp) {
tp->rx_opt.tstamp_ok = 1;
tp->tcp_header_len =
sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED;
tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
tcp_store_ts_recent(tp);
} else {
tp->tcp_header_len = sizeof(struct tcphdr);
}
if (tcp_is_sack(tp) && sysctl_tcp_fack)
tcp_enable_fack(tp);
tcp_mtup_init(sk);
tcp_sync_mss(sk, icsk->icsk_pmtu_cookie);
tcp_initialize_rcv_mss(sk);
/* Remember, tcp_poll() does not lock socket!
* Change state from SYN-SENT only after copied_seq
* is initialized. */
tp->copied_seq = tp->rcv_nxt;
smp_mb();
tcp_finish_connect(sk, skb);
if ((tp->syn_fastopen || tp->syn_data) &&
tcp_rcv_fastopen_synack(sk, skb, &foc))
return -1;
if (sk->sk_write_pending ||
icsk->icsk_accept_queue.rskq_defer_accept ||
icsk->icsk_ack.pingpong) {
/* Save one ACK. Data will be ready after
* several ticks, if write_pending is set.
*
* It may be deleted, but with this feature tcpdumps
* look so _wonderfully_ clever, that I was not able
* to stand against the temptation 8) --ANK
*/
inet_csk_schedule_ack(sk);
icsk->icsk_ack.lrcvtime = tcp_time_stamp;
tcp_enter_quickack_mode(sk);
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
TCP_DELACK_MAX, TCP_RTO_MAX);
discard:
tcp_drop(sk, skb);
return 0;
} else {
tcp_send_ack(sk);
}
return -1;
}
/* No ACK in the segment */
if (th->rst) {
/* rfc793:
* "If the RST bit is set
*
* Otherwise (no ACK) drop the segment and return."
*/
goto discard_and_undo;
}
/* PAWS check. */
if (tp->rx_opt.ts_recent_stamp && tp->rx_opt.saw_tstamp &&
tcp_paws_reject(&tp->rx_opt, 0))
goto discard_and_undo;
if (th->syn) {
/* We see SYN without ACK. It is attempt of
* simultaneous connect with crossed SYNs.
* Particularly, it can be connect to self.
*/
tcp_set_state(sk, TCP_SYN_RECV);
if (tp->rx_opt.saw_tstamp) {
tp->rx_opt.tstamp_ok = 1;
tcp_store_ts_recent(tp);
tp->tcp_header_len =
sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED;
} else {
tp->tcp_header_len = sizeof(struct tcphdr);
}
tp->rcv_nxt = TCP_SKB_CB(skb)->seq + 1;
tp->copied_seq = tp->rcv_nxt;
tp->rcv_wup = TCP_SKB_CB(skb)->seq + 1;
/* RFC1323: The window in SYN & SYN/ACK segments is
* never scaled.
*/
tp->snd_wnd = ntohs(th->window);
tp->snd_wl1 = TCP_SKB_CB(skb)->seq;
tp->max_window = tp->snd_wnd;
tcp_ecn_rcv_syn(tp, th);
tcp_mtup_init(sk);
tcp_sync_mss(sk, icsk->icsk_pmtu_cookie);
tcp_initialize_rcv_mss(sk);
tcp_send_synack(sk);
#if 0
/* Note, we could accept data and URG from this segment.
* There are no obstacles to make this (except that we must
* either change tcp_recvmsg() to prevent it from returning data
* before 3WHS completes per RFC793, or employ TCP Fast Open).
*
* However, if we ignore data in ACKless segments sometimes,
* we have no reasons to accept it sometimes.
* Also, seems the code doing it in step6 of tcp_rcv_state_process
* is not flawless. So, discard packet for sanity.
* Uncomment this return to process the data.
*/
return -1;
#else
goto discard;
#endif
}
/* "fifth, if neither of the SYN or RST bits is set then
* drop the segment and return."
*/
discard_and_undo:
tcp_clear_options(&tp->rx_opt);
tp->rx_opt.mss_clamp = saved_clamp;
goto discard;
reset_and_undo:
tcp_clear_options(&tp->rx_opt);
tp->rx_opt.mss_clamp = saved_clamp;
return 1;
}
/*
* This function implements the receiving procedure of RFC 793 for
* all states except ESTABLISHED and TIME_WAIT.
* It's called from both tcp_v4_rcv and tcp_v6_rcv and should be
* address independent.
*/
int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
const struct tcphdr *th = tcp_hdr(skb);
struct request_sock *req;
int queued = 0;
bool acceptable;
switch (sk->sk_state) {
case TCP_CLOSE:
goto discard;
case TCP_LISTEN:
if (th->ack)
return 1;
if (th->rst)
goto discard;
if (th->syn) {
if (th->fin)
goto discard;
if (icsk->icsk_af_ops->conn_request(sk, skb) < 0)
return 1;
consume_skb(skb);
return 0;
}
goto discard;
case TCP_SYN_SENT:
tp->rx_opt.saw_tstamp = 0;
queued = tcp_rcv_synsent_state_process(sk, skb, th);
if (queued >= 0)
return queued;
/* Do step6 onward by hand. */
tcp_urg(sk, skb, th);
__kfree_skb(skb);
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_data_snd_check(sk);
return 0;
}
tp->rx_opt.saw_tstamp = 0;
req = tp->fastopen_rsk;
if (req) {
WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV &&
sk->sk_state != TCP_FIN_WAIT1);
if (!tcp_check_req(sk, skb, req, true))
goto discard;
}
tcp: Restore RFC5961-compliant behavior for SYN packets Commit c3ae62af8e755 ("tcp: should drop incoming frames without ACK flag set") was created to mitigate a security vulnerability in which a local attacker is able to inject data into locally-opened sockets by using TCP protocol statistics in procfs to quickly find the correct sequence number. This broke the RFC5961 requirement to send a challenge ACK in response to spurious RST packets, which was subsequently fixed by commit 7b514a886ba50 ("tcp: accept RST without ACK flag"). Unfortunately, the RFC5961 requirement that spurious SYN packets be handled in a similar manner remains broken. RFC5961 section 4 states that: ... the handling of the SYN in the synchronized state SHOULD be performed as follows: 1) If the SYN bit is set, irrespective of the sequence number, TCP MUST send an ACK (also referred to as challenge ACK) to the remote peer: <SEQ=SND.NXT><ACK=RCV.NXT><CTL=ACK> After sending the acknowledgment, TCP MUST drop the unacceptable segment and stop processing further. By sending an ACK, the remote peer is challenged to confirm the loss of the previous connection and the request to start a new connection. A legitimate peer, after restart, would not have a TCB in the synchronized state. Thus, when the ACK arrives, the peer should send a RST segment back with the sequence number derived from the ACK field that caused the RST. This RST will confirm that the remote peer has indeed closed the previous connection. Upon receipt of a valid RST, the local TCP endpoint MUST terminate its connection. The local TCP endpoint should then rely on SYN retransmission from the remote end to re-establish the connection. This patch lets SYN packets through the discard added in c3ae62af8e755, so that spurious SYN packets are properly dealt with as per the RFC. The challenge ACK is sent unconditionally and is rate-limited, so the original vulnerability is not reintroduced by this patch. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 23:09:53 +00:00
if (!th->ack && !th->rst && !th->syn)
goto discard;
if (!tcp_validate_incoming(sk, skb, th, 0))
return 0;
/* step 5: check the ACK field */
acceptable = tcp_ack(sk, skb, FLAG_SLOWPATH |
FLAG_UPDATE_TS_RECENT) > 0;
switch (sk->sk_state) {
case TCP_SYN_RECV:
if (!acceptable)
return 1;
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
if (!tp->srtt_us)
tcp_synack_rtt_meas(sk, req);
/* Once we leave TCP_SYN_RECV, we no longer need req
* so release it.
*/
if (req) {
tp->total_retrans = req->num_retrans;
reqsk_fastopen_remove(sk, req, false);
} else {
/* Make sure socket is routed, for correct metrics. */
icsk->icsk_af_ops->rebuild_header(sk);
tcp_init_congestion_control(sk);
tcp_mtup_init(sk);
tp->copied_seq = tp->rcv_nxt;
tcp_init_buffer_space(sk);
}
smp_mb();
tcp_set_state(sk, TCP_ESTABLISHED);
sk->sk_state_change(sk);
/* Note, that this wakeup is only for marginal crossed SYN case.
* Passively open sockets are not waked up, because
* sk->sk_sleep == NULL and sk->sk_socket == NULL.
*/
if (sk->sk_socket)
sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT);
tp->snd_una = TCP_SKB_CB(skb)->ack_seq;
tp->snd_wnd = ntohs(th->window) << tp->rx_opt.snd_wscale;
tcp_init_wl(tp, TCP_SKB_CB(skb)->seq);
if (tp->rx_opt.tstamp_ok)
tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
if (req) {
/* Re-arm the timer because data may have been sent out.
* This is similar to the regular data transmission case
* when new data has just been ack'ed.
*
* (TFO) - we could try to be more aggressive and
* retransmitting any data sooner based on when they
* are sent out.
*/
tcp_rearm_rto(sk);
} else
tcp_init_metrics(sk);
tcp_update_pacing_rate(sk);
/* Prevent spurious tcp_cwnd_restart() on first data packet */
tp->lsndtime = tcp_time_stamp;
tcp_initialize_rcv_mss(sk);
tcp_fast_path_on(tp);
break;
case TCP_FIN_WAIT1: {
struct dst_entry *dst;
int tmo;
/* If we enter the TCP_FIN_WAIT1 state and we are a
* Fast Open socket and this is the first acceptable
* ACK we have received, this would have acknowledged
* our SYNACK so stop the SYNACK timer.
*/
if (req) {
/* Return RST if ack_seq is invalid.
* Note that RFC793 only says to generate a
* DUPACK for it but for TCP Fast Open it seems
* better to treat this case like TCP_SYN_RECV
* above.
*/
if (!acceptable)
return 1;
/* We no longer need the request sock. */
reqsk_fastopen_remove(sk, req, false);
tcp_rearm_rto(sk);
}
if (tp->snd_una != tp->write_seq)
break;
tcp_set_state(sk, TCP_FIN_WAIT2);
sk->sk_shutdown |= SEND_SHUTDOWN;
dst = __sk_dst_get(sk);
if (dst)
dst_confirm(dst);
if (!sock_flag(sk, SOCK_DEAD)) {
/* Wake up lingering close() */
sk->sk_state_change(sk);
break;
}
if (tp->linger2 < 0 ||
(TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb)->seq &&
after(TCP_SKB_CB(skb)->end_seq - th->fin, tp->rcv_nxt))) {
tcp_done(sk);
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPABORTONDATA);
return 1;
}
tmo = tcp_fin_time(sk);
if (tmo > TCP_TIMEWAIT_LEN) {
inet_csk_reset_keepalive_timer(sk, tmo - TCP_TIMEWAIT_LEN);
} else if (th->fin || sock_owned_by_user(sk)) {
/* Bad case. We could lose such FIN otherwise.
* It is not a big problem, but it looks confusing
* and not so rare event. We still can lose it now,
* if it spins in bh_lock_sock(), but it is really
* marginal case.
*/
inet_csk_reset_keepalive_timer(sk, tmo);
} else {
tcp_time_wait(sk, TCP_FIN_WAIT2, tmo);
goto discard;
}
break;
}
case TCP_CLOSING:
if (tp->snd_una == tp->write_seq) {
tcp_time_wait(sk, TCP_TIME_WAIT, 0);
goto discard;
}
break;
case TCP_LAST_ACK:
if (tp->snd_una == tp->write_seq) {
tcp_update_metrics(sk);
tcp_done(sk);
goto discard;
}
break;
}
/* step 6: check the URG bit */
tcp_urg(sk, skb, th);
/* step 7: process the segment text */
switch (sk->sk_state) {
case TCP_CLOSE_WAIT:
case TCP_CLOSING:
case TCP_LAST_ACK:
if (!before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt))
break;
case TCP_FIN_WAIT1:
case TCP_FIN_WAIT2:
/* RFC 793 says to queue data in these states,
* RFC 1122 says we MUST send a reset.
* BSD 4.4 also does reset.
*/
if (sk->sk_shutdown & RCV_SHUTDOWN) {
if (TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb)->seq &&
after(TCP_SKB_CB(skb)->end_seq - th->fin, tp->rcv_nxt)) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPABORTONDATA);
tcp_reset(sk);
return 1;
}
}
/* Fall through */
case TCP_ESTABLISHED:
tcp_data_queue(sk, skb);
queued = 1;
break;
}
/* tcp_data could move socket to TIME-WAIT */
if (sk->sk_state != TCP_CLOSE) {
[TCP]: Sed magic converts func(sk, tp, ...) -> func(sk, ...) This is (mostly) automated change using magic: sed -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e '/struct sock \*sk/ N' -e 's|struct sock \*sk,[\n\t ]*struct tcp_sock \*tp\([^{]*\n{\n\)| struct sock \*sk\1\tstruct tcp_sock *tp = tcp_sk(sk);\n|g' -e 's|struct sock \*sk, struct tcp_sock \*tp| struct sock \*sk|g' -e 's|sk, tp\([^-]\)|sk\1|g' Fixed four unused variable (tp) warnings that were introduced. In addition, manually added newlines after local variables and tweaked function arguments positioning. $ gcc --version gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) ... $ codiff -fV built-in.o.old built-in.o.new net/ipv4/route.c: rt_cache_flush | +14 1 function changed, 14 bytes added net/ipv4/tcp.c: tcp_setsockopt | -5 tcp_sendpage | -25 tcp_sendmsg | -16 3 functions changed, 46 bytes removed net/ipv4/tcp_input.c: tcp_try_undo_recovery | +3 tcp_try_undo_dsack | +2 tcp_mark_head_lost | -12 tcp_ack | -15 tcp_event_data_recv | -32 tcp_rcv_state_process | -10 tcp_rcv_established | +1 7 functions changed, 6 bytes added, 69 bytes removed, diff: -63 net/ipv4/tcp_output.c: update_send_head | -9 tcp_transmit_skb | +19 tcp_cwnd_validate | +1 tcp_write_wakeup | -17 __tcp_push_pending_frames | -25 tcp_push_one | -8 tcp_send_fin | -4 7 functions changed, 20 bytes added, 63 bytes removed, diff: -43 built-in.o.new: 18 functions changed, 40 bytes added, 178 bytes removed, diff: -138 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 05:18:02 +00:00
tcp_data_snd_check(sk);
tcp_ack_snd_check(sk);
}
if (!queued) {
discard:
tcp_drop(sk, skb);
}
return 0;
}
EXPORT_SYMBOL(tcp_rcv_state_process);
static inline void pr_drop_req(struct request_sock *req, __u16 port, int family)
{
struct inet_request_sock *ireq = inet_rsk(req);
if (family == AF_INET)
net_dbg_ratelimited("drop open request from %pI4/%u\n",
&ireq->ir_rmt_addr, port);
#if IS_ENABLED(CONFIG_IPV6)
else if (family == AF_INET6)
net_dbg_ratelimited("drop open request from %pI6/%u\n",
&ireq->ir_v6_rmt_addr, port);
#endif
}
/* RFC3168 : 6.1.1 SYN packets must not have ECT/ECN bits set
*
* If we receive a SYN packet with these bits set, it means a
* network is playing bad games with TOS bits. In order to
* avoid possible false congestion notifications, we disable
* TCP ECN negotiation.
*
* Exception: tcp_ca wants ECN. This is required for DCTCP
net: dctcp: loosen requirement to assert ECT(0) during 3WHS One deployment requirement of DCTCP is to be able to run in a DC setting along with TCP traffic. As Glenn Judd's NSDI'15 paper "Attaining the Promise and Avoiding the Pitfalls of TCP in the Datacenter" [1] (tba) explains, one way to solve this on switch side is to split DCTCP and TCP traffic in two queues per switch port based on the DSCP: one queue soley intended for DCTCP traffic and one for non-DCTCP traffic. For the DCTCP queue, there's the marking threshold K as explained in commit e3118e8359bb ("net: tcp: add DCTCP congestion control algorithm") for RED marking ECT(0) packets with CE. For the non-DCTCP queue, there's f.e. a classic tail drop queue. As already explained in e3118e8359bb, running DCTCP at scale when not marking SYN/SYN-ACK packets with ECT(0) has severe consequences as for non-ECT(0) packets, traversing the RED marking DCTCP queue will result in a severe reduction of connection probability. This is due to the DCTCP queue being dominated by ECT(0) traffic and switches handle non-ECT traffic in the RED marking queue after passing K as drops, where K is usually a low watermark in order to leave enough tailroom for bursts. Splitting DCTCP traffic among several queues (ECN and non-ECN queue) is being considered a terrible idea in the network community as it splits single flows across multiple network paths. Therefore, commit e3118e8359bb implements this on Linux as ECT(0) marked traffic, as we argue that marking all packets of a DCTCP flow is the only viable solution and also doesn't speak against the draft. However, recently, a DCTCP implementation for FreeBSD hit also their mainline kernel [2]. In order to let them play well together with Linux' DCTCP, we would need to loosen the requirement that ECT(0) has to be asserted during the 3WHS as not implemented in FreeBSD. This simplifies the ECN test and lets DCTCP work together with FreeBSD. Joint work with Daniel Borkmann. [1] https://www.usenix.org/conference/nsdi15/technical-sessions/presentation/judd [2] https://github.com/freebsd/freebsd/commit/8ad879445281027858a7fa706d13e458095b595f Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 19:45:20 +00:00
* congestion control: Linux DCTCP asserts ECT on all packets,
* including SYN, which is most optimal solution; however,
* others, such as FreeBSD do not.
*/
static void tcp_ecn_create_request(struct request_sock *req,
const struct sk_buff *skb,
net: allow setting ecn via routing table This patch allows to set ECN on a per-route basis in case the sysctl tcp_ecn is not set to 1. In other words, when ECN is set for specific routes, it provides a tcp_ecn=1 behaviour for that route while the rest of the stack acts according to the global settings. One can use 'ip route change dev $dev $net features ecn' to toggle this. Having a more fine-grained per-route setting can be beneficial for various reasons, for example, 1) within data centers, or 2) local ISPs may deploy ECN support for their own video/streaming services [1], etc. There was a recent measurement study/paper [2] which scanned the Alexa's publicly available top million websites list from a vantage point in US, Europe and Asia: Half of the Alexa list will now happily use ECN (tcp_ecn=2, most likely blamed to commit 255cac91c3 ("tcp: extend ECN sysctl to allow server-side only ECN") ;)); the break in connectivity on-path was found is about 1 in 10,000 cases. Timeouts rather than receiving back RSTs were much more common in the negotiation phase (and mostly seen in the Alexa middle band, ranks around 50k-150k): from 12-thousand hosts on which there _may_ be ECN-linked connection failures, only 79 failed with RST when _not_ failing with RST when ECN is not requested. It's unclear though, how much equipment in the wild actually marks CE when buffers start to fill up. We thought about a fallback to non-ECN for retransmitted SYNs as another global option (which could perhaps one day be made default), but as Eric points out, there's much more work needed to detect broken middleboxes. Two examples Eric mentioned are buggy firewalls that accept only a single SYN per flow, and middleboxes that successfully let an ECN flow establish, but later mark CE for all packets (so cwnd converges to 1). [1] http://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdf, p.15 [2] http://ecn.ethz.ch/ Joint work with Daniel Borkmann. Reference: http://thread.gmane.org/gmane.linux.network/335797 Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 16:35:03 +00:00
const struct sock *listen_sk,
const struct dst_entry *dst)
{
const struct tcphdr *th = tcp_hdr(skb);
const struct net *net = sock_net(listen_sk);
bool th_ecn = th->ece && th->cwr;
net: dctcp: loosen requirement to assert ECT(0) during 3WHS One deployment requirement of DCTCP is to be able to run in a DC setting along with TCP traffic. As Glenn Judd's NSDI'15 paper "Attaining the Promise and Avoiding the Pitfalls of TCP in the Datacenter" [1] (tba) explains, one way to solve this on switch side is to split DCTCP and TCP traffic in two queues per switch port based on the DSCP: one queue soley intended for DCTCP traffic and one for non-DCTCP traffic. For the DCTCP queue, there's the marking threshold K as explained in commit e3118e8359bb ("net: tcp: add DCTCP congestion control algorithm") for RED marking ECT(0) packets with CE. For the non-DCTCP queue, there's f.e. a classic tail drop queue. As already explained in e3118e8359bb, running DCTCP at scale when not marking SYN/SYN-ACK packets with ECT(0) has severe consequences as for non-ECT(0) packets, traversing the RED marking DCTCP queue will result in a severe reduction of connection probability. This is due to the DCTCP queue being dominated by ECT(0) traffic and switches handle non-ECT traffic in the RED marking queue after passing K as drops, where K is usually a low watermark in order to leave enough tailroom for bursts. Splitting DCTCP traffic among several queues (ECN and non-ECN queue) is being considered a terrible idea in the network community as it splits single flows across multiple network paths. Therefore, commit e3118e8359bb implements this on Linux as ECT(0) marked traffic, as we argue that marking all packets of a DCTCP flow is the only viable solution and also doesn't speak against the draft. However, recently, a DCTCP implementation for FreeBSD hit also their mainline kernel [2]. In order to let them play well together with Linux' DCTCP, we would need to loosen the requirement that ECT(0) has to be asserted during the 3WHS as not implemented in FreeBSD. This simplifies the ECN test and lets DCTCP work together with FreeBSD. Joint work with Daniel Borkmann. [1] https://www.usenix.org/conference/nsdi15/technical-sessions/presentation/judd [2] https://github.com/freebsd/freebsd/commit/8ad879445281027858a7fa706d13e458095b595f Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 19:45:20 +00:00
bool ect, ecn_ok;
u32 ecn_ok_dst;
if (!th_ecn)
return;
ect = !INET_ECN_is_not_ect(TCP_SKB_CB(skb)->ip_dsfield);
ecn_ok_dst = dst_feature(dst, DST_FEATURE_ECN_MASK);
ecn_ok = net->ipv4.sysctl_tcp_ecn || ecn_ok_dst;
if ((!ect && ecn_ok) || tcp_ca_needs_ecn(listen_sk) ||
(ecn_ok_dst & DST_FEATURE_ECN_CA))
inet_rsk(req)->ecn_ok = 1;
}
static void tcp_openreq_init(struct request_sock *req,
const struct tcp_options_received *rx_opt,
struct sk_buff *skb, const struct sock *sk)
{
struct inet_request_sock *ireq = inet_rsk(req);
req->rsk_rcv_wnd = 0; /* So that tcp_send_synack() knows! */
req->cookie_ts = 0;
tcp_rsk(req)->rcv_isn = TCP_SKB_CB(skb)->seq;
tcp_rsk(req)->rcv_nxt = TCP_SKB_CB(skb)->seq + 1;
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
skb_mstamp_get(&tcp_rsk(req)->snt_synack);
tcp_rsk(req)->last_oow_ack_time = 0;
req->mss = rx_opt->mss_clamp;
req->ts_recent = rx_opt->saw_tstamp ? rx_opt->rcv_tsval : 0;
ireq->tstamp_ok = rx_opt->tstamp_ok;
ireq->sack_ok = rx_opt->sack_ok;
ireq->snd_wscale = rx_opt->snd_wscale;
ireq->wscale_ok = rx_opt->wscale_ok;
ireq->acked = 0;
ireq->ecn_ok = 0;
ireq->ir_rmt_port = tcp_hdr(skb)->source;
ireq->ir_num = ntohs(tcp_hdr(skb)->dest);
ireq->ir_mark = inet_request_mark(sk, skb);
}
struct request_sock *inet_reqsk_alloc(const struct request_sock_ops *ops,
struct sock *sk_listener,
bool attach_listener)
{
struct request_sock *req = reqsk_alloc(ops, sk_listener,
attach_listener);
if (req) {
struct inet_request_sock *ireq = inet_rsk(req);
kmemcheck_annotate_bitfield(ireq, flags);
ireq->opt = NULL;
atomic64_set(&ireq->ir_cookie, 0);
ireq->ireq_state = TCP_NEW_SYN_RECV;
write_pnet(&ireq->ireq_net, sock_net(sk_listener));
ireq->ireq_family = sk_listener->sk_family;
}
return req;
}
EXPORT_SYMBOL(inet_reqsk_alloc);
/*
* Return true if a syncookie should be sent
*/
static bool tcp_syn_flood_action(const struct sock *sk,
const struct sk_buff *skb,
const char *proto)
{
struct request_sock_queue *queue = &inet_csk(sk)->icsk_accept_queue;
const char *msg = "Dropping request";
bool want_cookie = false;
struct net *net = sock_net(sk);
#ifdef CONFIG_SYN_COOKIES
if (net->ipv4.sysctl_tcp_syncookies) {
msg = "Sending cookies";
want_cookie = true;
__NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPREQQFULLDOCOOKIES);
} else
#endif
__NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPREQQFULLDROP);
if (!queue->synflood_warned &&
net->ipv4.sysctl_tcp_syncookies != 2 &&
xchg(&queue->synflood_warned, 1) == 0)
pr_info("%s: Possible SYN flooding on port %d. %s. Check SNMP counters.\n",
proto, ntohs(tcp_hdr(skb)->dest), msg);
return want_cookie;
}
static void tcp_reqsk_record_syn(const struct sock *sk,
struct request_sock *req,
const struct sk_buff *skb)
{
if (tcp_sk(sk)->save_syn) {
u32 len = skb_network_header_len(skb) + tcp_hdrlen(skb);
u32 *copy;
copy = kmalloc(len + sizeof(u32), GFP_ATOMIC);
if (copy) {
copy[0] = len;
memcpy(&copy[1], skb_network_header(skb), len);
req->saved_syn = copy;
}
}
}
int tcp_conn_request(struct request_sock_ops *rsk_ops,
const struct tcp_request_sock_ops *af_ops,
struct sock *sk, struct sk_buff *skb)
{
struct tcp_fastopen_cookie foc = { .len = -1 };
__u32 isn = TCP_SKB_CB(skb)->tcp_tw_isn;
struct tcp_options_received tmp_opt;
struct tcp_sock *tp = tcp_sk(sk);
struct net *net = sock_net(sk);
struct sock *fastopen_sk = NULL;
struct dst_entry *dst = NULL;
struct request_sock *req;
bool want_cookie = false;
struct flowi fl;
/* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
* evidently real one.
*/
if ((net->ipv4.sysctl_tcp_syncookies == 2 ||
inet_csk_reqsk_queue_is_full(sk)) && !isn) {
want_cookie = tcp_syn_flood_action(sk, skb, rsk_ops->slab_name);
if (!want_cookie)
goto drop;
}
/* Accept backlog is full. If we have already queued enough
* of warm entries in syn queue, drop request. It is better than
* clogging syn queue with openreqs with exponentially increasing
* timeout.
*/
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_LISTENOVERFLOWS);
goto drop;
}
req = inet_reqsk_alloc(rsk_ops, sk, !want_cookie);
if (!req)
goto drop;
tcp_rsk(req)->af_specific = af_ops;
tcp_clear_options(&tmp_opt);
tmp_opt.mss_clamp = af_ops->mss_clamp;
tmp_opt.user_mss = tp->rx_opt.user_mss;
tcp_parse_options(skb, &tmp_opt, 0, want_cookie ? NULL : &foc);
if (want_cookie && !tmp_opt.saw_tstamp)
tcp_clear_options(&tmp_opt);
tmp_opt.tstamp_ok = tmp_opt.saw_tstamp;
tcp_openreq_init(req, &tmp_opt, skb, sk);
/* Note: tcp_v6_init_req() might override ir_iif for link locals */
inet_rsk(req)->ir_iif = inet_request_bound_dev_if(sk, skb);
af_ops->init_req(req, sk, skb);
if (security_inet_conn_request(sk, skb, req))
goto drop_and_free;
net: allow setting ecn via routing table This patch allows to set ECN on a per-route basis in case the sysctl tcp_ecn is not set to 1. In other words, when ECN is set for specific routes, it provides a tcp_ecn=1 behaviour for that route while the rest of the stack acts according to the global settings. One can use 'ip route change dev $dev $net features ecn' to toggle this. Having a more fine-grained per-route setting can be beneficial for various reasons, for example, 1) within data centers, or 2) local ISPs may deploy ECN support for their own video/streaming services [1], etc. There was a recent measurement study/paper [2] which scanned the Alexa's publicly available top million websites list from a vantage point in US, Europe and Asia: Half of the Alexa list will now happily use ECN (tcp_ecn=2, most likely blamed to commit 255cac91c3 ("tcp: extend ECN sysctl to allow server-side only ECN") ;)); the break in connectivity on-path was found is about 1 in 10,000 cases. Timeouts rather than receiving back RSTs were much more common in the negotiation phase (and mostly seen in the Alexa middle band, ranks around 50k-150k): from 12-thousand hosts on which there _may_ be ECN-linked connection failures, only 79 failed with RST when _not_ failing with RST when ECN is not requested. It's unclear though, how much equipment in the wild actually marks CE when buffers start to fill up. We thought about a fallback to non-ECN for retransmitted SYNs as another global option (which could perhaps one day be made default), but as Eric points out, there's much more work needed to detect broken middleboxes. Two examples Eric mentioned are buggy firewalls that accept only a single SYN per flow, and middleboxes that successfully let an ECN flow establish, but later mark CE for all packets (so cwnd converges to 1). [1] http://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdf, p.15 [2] http://ecn.ethz.ch/ Joint work with Daniel Borkmann. Reference: http://thread.gmane.org/gmane.linux.network/335797 Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 16:35:03 +00:00
if (!want_cookie && !isn) {
/* VJ's idea. We save last timestamp seen
* from the destination in peer table, when entering
* state TIME-WAIT, and check against it before
* accepting new connection request.
*
* If "isn" is not zero, this request hit alive
* timewait bucket, so that all the necessary checks
* are made in the function processing timewait state.
*/
tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic tcp_tw_recycle heavily relies on tcp timestamps to build a per-host ordering of incoming connections and teardowns without the need to hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for the last measured RTO. To do so, we keep the last seen timestamp in a per-host indexed data structure and verify if the incoming timestamp in a connection request is strictly greater than the saved one during last connection teardown. Thus we can verify later on that no old data packets will be accepted by the new connection. During moving a socket to time-wait state we already verify if timestamps where seen on a connection. Only if that was the case we let the time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN will be used. But we don't verify this on incoming SYN packets. If a connection teardown was less than TCP_PAWS_MSL seconds in the past we cannot guarantee to not accept data packets from an old connection if no timestamps are present. We should drop this SYN packet. This patch closes this loophole. Please note, this patch does not make tcp_tw_recycle in any way more usable but only adds another safety check: Sporadic drops of SYN packets because of reordering in the network or in the socket backlog queues can happen. Users behing NAT trying to connect to a tcp_tw_recycle enabled server can get caught in blackholes and their connection requests may regullary get dropped because hosts behind an address translator don't have synchronized tcp timestamp clocks. tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled. In general, use of tcp_tw_recycle is disadvised. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 20:06:12 +00:00
if (tcp_death_row.sysctl_tw_recycle) {
bool strict;
dst = af_ops->route_req(sk, &fl, req, &strict);
tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic tcp_tw_recycle heavily relies on tcp timestamps to build a per-host ordering of incoming connections and teardowns without the need to hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for the last measured RTO. To do so, we keep the last seen timestamp in a per-host indexed data structure and verify if the incoming timestamp in a connection request is strictly greater than the saved one during last connection teardown. Thus we can verify later on that no old data packets will be accepted by the new connection. During moving a socket to time-wait state we already verify if timestamps where seen on a connection. Only if that was the case we let the time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN will be used. But we don't verify this on incoming SYN packets. If a connection teardown was less than TCP_PAWS_MSL seconds in the past we cannot guarantee to not accept data packets from an old connection if no timestamps are present. We should drop this SYN packet. This patch closes this loophole. Please note, this patch does not make tcp_tw_recycle in any way more usable but only adds another safety check: Sporadic drops of SYN packets because of reordering in the network or in the socket backlog queues can happen. Users behing NAT trying to connect to a tcp_tw_recycle enabled server can get caught in blackholes and their connection requests may regullary get dropped because hosts behind an address translator don't have synchronized tcp timestamp clocks. tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled. In general, use of tcp_tw_recycle is disadvised. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 20:06:12 +00:00
if (dst && strict &&
tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic tcp_tw_recycle heavily relies on tcp timestamps to build a per-host ordering of incoming connections and teardowns without the need to hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for the last measured RTO. To do so, we keep the last seen timestamp in a per-host indexed data structure and verify if the incoming timestamp in a connection request is strictly greater than the saved one during last connection teardown. Thus we can verify later on that no old data packets will be accepted by the new connection. During moving a socket to time-wait state we already verify if timestamps where seen on a connection. Only if that was the case we let the time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN will be used. But we don't verify this on incoming SYN packets. If a connection teardown was less than TCP_PAWS_MSL seconds in the past we cannot guarantee to not accept data packets from an old connection if no timestamps are present. We should drop this SYN packet. This patch closes this loophole. Please note, this patch does not make tcp_tw_recycle in any way more usable but only adds another safety check: Sporadic drops of SYN packets because of reordering in the network or in the socket backlog queues can happen. Users behing NAT trying to connect to a tcp_tw_recycle enabled server can get caught in blackholes and their connection requests may regullary get dropped because hosts behind an address translator don't have synchronized tcp timestamp clocks. tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled. In general, use of tcp_tw_recycle is disadvised. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 20:06:12 +00:00
!tcp_peer_is_proven(req, dst, true,
tmp_opt.saw_tstamp)) {
NET_INC_STATS(sock_net(sk), LINUX_MIB_PAWSPASSIVEREJECTED);
goto drop_and_release;
}
}
/* Kill the following clause, if you dislike this way. */
else if (!net->ipv4.sysctl_tcp_syncookies &&
(sysctl_max_syn_backlog - inet_csk_reqsk_queue_len(sk) <
(sysctl_max_syn_backlog >> 2)) &&
tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic tcp_tw_recycle heavily relies on tcp timestamps to build a per-host ordering of incoming connections and teardowns without the need to hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for the last measured RTO. To do so, we keep the last seen timestamp in a per-host indexed data structure and verify if the incoming timestamp in a connection request is strictly greater than the saved one during last connection teardown. Thus we can verify later on that no old data packets will be accepted by the new connection. During moving a socket to time-wait state we already verify if timestamps where seen on a connection. Only if that was the case we let the time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN will be used. But we don't verify this on incoming SYN packets. If a connection teardown was less than TCP_PAWS_MSL seconds in the past we cannot guarantee to not accept data packets from an old connection if no timestamps are present. We should drop this SYN packet. This patch closes this loophole. Please note, this patch does not make tcp_tw_recycle in any way more usable but only adds another safety check: Sporadic drops of SYN packets because of reordering in the network or in the socket backlog queues can happen. Users behing NAT trying to connect to a tcp_tw_recycle enabled server can get caught in blackholes and their connection requests may regullary get dropped because hosts behind an address translator don't have synchronized tcp timestamp clocks. tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled. In general, use of tcp_tw_recycle is disadvised. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14 20:06:12 +00:00
!tcp_peer_is_proven(req, dst, false,
tmp_opt.saw_tstamp)) {
/* Without syncookies last quarter of
* backlog is filled with destinations,
* proven to be alive.
* It means that we continue to communicate
* to destinations, already remembered
* to the moment of synflood.
*/
pr_drop_req(req, ntohs(tcp_hdr(skb)->source),
rsk_ops->family);
goto drop_and_release;
}
isn = af_ops->init_seq(skb);
}
if (!dst) {
dst = af_ops->route_req(sk, &fl, req, NULL);
if (!dst)
goto drop_and_free;
}
net: allow setting ecn via routing table This patch allows to set ECN on a per-route basis in case the sysctl tcp_ecn is not set to 1. In other words, when ECN is set for specific routes, it provides a tcp_ecn=1 behaviour for that route while the rest of the stack acts according to the global settings. One can use 'ip route change dev $dev $net features ecn' to toggle this. Having a more fine-grained per-route setting can be beneficial for various reasons, for example, 1) within data centers, or 2) local ISPs may deploy ECN support for their own video/streaming services [1], etc. There was a recent measurement study/paper [2] which scanned the Alexa's publicly available top million websites list from a vantage point in US, Europe and Asia: Half of the Alexa list will now happily use ECN (tcp_ecn=2, most likely blamed to commit 255cac91c3 ("tcp: extend ECN sysctl to allow server-side only ECN") ;)); the break in connectivity on-path was found is about 1 in 10,000 cases. Timeouts rather than receiving back RSTs were much more common in the negotiation phase (and mostly seen in the Alexa middle band, ranks around 50k-150k): from 12-thousand hosts on which there _may_ be ECN-linked connection failures, only 79 failed with RST when _not_ failing with RST when ECN is not requested. It's unclear though, how much equipment in the wild actually marks CE when buffers start to fill up. We thought about a fallback to non-ECN for retransmitted SYNs as another global option (which could perhaps one day be made default), but as Eric points out, there's much more work needed to detect broken middleboxes. Two examples Eric mentioned are buggy firewalls that accept only a single SYN per flow, and middleboxes that successfully let an ECN flow establish, but later mark CE for all packets (so cwnd converges to 1). [1] http://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdf, p.15 [2] http://ecn.ethz.ch/ Joint work with Daniel Borkmann. Reference: http://thread.gmane.org/gmane.linux.network/335797 Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 16:35:03 +00:00
tcp_ecn_create_request(req, skb, sk, dst);
if (want_cookie) {
isn = cookie_init_sequence(af_ops, sk, skb, &req->mss);
req->cookie_ts = tmp_opt.tstamp_ok;
if (!tmp_opt.tstamp_ok)
inet_rsk(req)->ecn_ok = 0;
}
tcp_rsk(req)->snt_isn = isn;
tcp_rsk(req)->txhash = net_tx_rndhash();
tcp_openreq_init_rwin(req, sk, dst);
if (!want_cookie) {
tcp_reqsk_record_syn(sk, req, skb);
fastopen_sk = tcp_try_fastopen(sk, skb, req, &foc, dst);
}
if (fastopen_sk) {
af_ops->send_synack(fastopen_sk, dst, &fl, req,
&foc, TCP_SYNACK_FASTOPEN);
/* Add the child socket directly into the accept queue */
inet_csk_reqsk_queue_add(sk, req, fastopen_sk);
sk->sk_data_ready(sk);
bh_unlock_sock(fastopen_sk);
sock_put(fastopen_sk);
} else {
tcp_rsk(req)->tfo_listener = false;
if (!want_cookie)
inet_csk_reqsk_queue_hash_add(sk, req, TCP_TIMEOUT_INIT);
af_ops->send_synack(sk, dst, &fl, req, &foc,
!want_cookie ? TCP_SYNACK_NORMAL :
TCP_SYNACK_COOKIE);
if (want_cookie) {
reqsk_free(req);
return 0;
}
}
reqsk_put(req);
return 0;
drop_and_release:
dst_release(dst);
drop_and_free:
reqsk_free(req);
drop:
tcp_listendrop(sk);
return 0;
}
EXPORT_SYMBOL(tcp_conn_request);