kernel-ark/fs/ubifs/tnc_misc.c

495 lines
13 KiB
C
Raw Normal View History

/*
* This file is part of UBIFS.
*
* Copyright (C) 2006-2008 Nokia Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 51
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Authors: Adrian Hunter
* Artem Bityutskiy (Битюцкий Артём)
*/
/*
* This file contains miscelanious TNC-related functions shared betweend
* different files. This file does not form any logically separate TNC
* sub-system. The file was created because there is a lot of TNC code and
* putting it all in one file would make that file too big and unreadable.
*/
#include "ubifs.h"
/**
* ubifs_tnc_levelorder_next - next TNC tree element in levelorder traversal.
* @zr: root of the subtree to traverse
* @znode: previous znode
*
* This function implements levelorder TNC traversal. The LNC is ignored.
* Returns the next element or %NULL if @znode is already the last one.
*/
struct ubifs_znode *ubifs_tnc_levelorder_next(struct ubifs_znode *zr,
struct ubifs_znode *znode)
{
int level, iip, level_search = 0;
struct ubifs_znode *zn;
ubifs_assert(zr);
if (unlikely(!znode))
return zr;
if (unlikely(znode == zr)) {
if (znode->level == 0)
return NULL;
return ubifs_tnc_find_child(zr, 0);
}
level = znode->level;
iip = znode->iip;
while (1) {
ubifs_assert(znode->level <= zr->level);
/*
* First walk up until there is a znode with next branch to
* look at.
*/
while (znode->parent != zr && iip >= znode->parent->child_cnt) {
znode = znode->parent;
iip = znode->iip;
}
if (unlikely(znode->parent == zr &&
iip >= znode->parent->child_cnt)) {
/* This level is done, switch to the lower one */
level -= 1;
if (level_search || level < 0)
/*
* We were already looking for znode at lower
* level ('level_search'). As we are here
* again, it just does not exist. Or all levels
* were finished ('level < 0').
*/
return NULL;
level_search = 1;
iip = -1;
znode = ubifs_tnc_find_child(zr, 0);
ubifs_assert(znode);
}
/* Switch to the next index */
zn = ubifs_tnc_find_child(znode->parent, iip + 1);
if (!zn) {
/* No more children to look at, we have walk up */
iip = znode->parent->child_cnt;
continue;
}
/* Walk back down to the level we came from ('level') */
while (zn->level != level) {
znode = zn;
zn = ubifs_tnc_find_child(zn, 0);
if (!zn) {
/*
* This path is not too deep so it does not
* reach 'level'. Try next path.
*/
iip = znode->iip;
break;
}
}
if (zn) {
ubifs_assert(zn->level >= 0);
return zn;
}
}
}
/**
* ubifs_search_zbranch - search znode branch.
* @c: UBIFS file-system description object
* @znode: znode to search in
* @key: key to search for
* @n: znode branch slot number is returned here
*
* This is a helper function which search branch with key @key in @znode using
* binary search. The result of the search may be:
* o exact match, then %1 is returned, and the slot number of the branch is
* stored in @n;
* o no exact match, then %0 is returned and the slot number of the left
* closest branch is returned in @n; the slot if all keys in this znode are
* greater than @key, then %-1 is returned in @n.
*/
int ubifs_search_zbranch(const struct ubifs_info *c,
const struct ubifs_znode *znode,
const union ubifs_key *key, int *n)
{
int beg = 0, end = znode->child_cnt, uninitialized_var(mid);
int uninitialized_var(cmp);
const struct ubifs_zbranch *zbr = &znode->zbranch[0];
ubifs_assert(end > beg);
while (end > beg) {
mid = (beg + end) >> 1;
cmp = keys_cmp(c, key, &zbr[mid].key);
if (cmp > 0)
beg = mid + 1;
else if (cmp < 0)
end = mid;
else {
*n = mid;
return 1;
}
}
*n = end - 1;
/* The insert point is after *n */
ubifs_assert(*n >= -1 && *n < znode->child_cnt);
if (*n == -1)
ubifs_assert(keys_cmp(c, key, &zbr[0].key) < 0);
else
ubifs_assert(keys_cmp(c, key, &zbr[*n].key) > 0);
if (*n + 1 < znode->child_cnt)
ubifs_assert(keys_cmp(c, key, &zbr[*n + 1].key) < 0);
return 0;
}
/**
* ubifs_tnc_postorder_first - find first znode to do postorder tree traversal.
* @znode: znode to start at (root of the sub-tree to traverse)
*
* Find the lowest leftmost znode in a subtree of the TNC tree. The LNC is
* ignored.
*/
struct ubifs_znode *ubifs_tnc_postorder_first(struct ubifs_znode *znode)
{
if (unlikely(!znode))
return NULL;
while (znode->level > 0) {
struct ubifs_znode *child;
child = ubifs_tnc_find_child(znode, 0);
if (!child)
return znode;
znode = child;
}
return znode;
}
/**
* ubifs_tnc_postorder_next - next TNC tree element in postorder traversal.
* @znode: previous znode
*
* This function implements postorder TNC traversal. The LNC is ignored.
* Returns the next element or %NULL if @znode is already the last one.
*/
struct ubifs_znode *ubifs_tnc_postorder_next(struct ubifs_znode *znode)
{
struct ubifs_znode *zn;
ubifs_assert(znode);
if (unlikely(!znode->parent))
return NULL;
/* Switch to the next index in the parent */
zn = ubifs_tnc_find_child(znode->parent, znode->iip + 1);
if (!zn)
/* This is in fact the last child, return parent */
return znode->parent;
/* Go to the first znode in this new subtree */
return ubifs_tnc_postorder_first(zn);
}
/**
* ubifs_destroy_tnc_subtree - destroy all znodes connected to a subtree.
* @znode: znode defining subtree to destroy
*
* This function destroys subtree of the TNC tree. Returns number of clean
* znodes in the subtree.
*/
long ubifs_destroy_tnc_subtree(struct ubifs_znode *znode)
{
struct ubifs_znode *zn = ubifs_tnc_postorder_first(znode);
long clean_freed = 0;
int n;
ubifs_assert(zn);
while (1) {
for (n = 0; n < zn->child_cnt; n++) {
if (!zn->zbranch[n].znode)
continue;
if (zn->level > 0 &&
!ubifs_zn_dirty(zn->zbranch[n].znode))
clean_freed += 1;
cond_resched();
kfree(zn->zbranch[n].znode);
}
if (zn == znode) {
if (!ubifs_zn_dirty(zn))
clean_freed += 1;
kfree(zn);
return clean_freed;
}
zn = ubifs_tnc_postorder_next(zn);
}
}
/**
* read_znode - read an indexing node from flash and fill znode.
* @c: UBIFS file-system description object
* @lnum: LEB of the indexing node to read
* @offs: node offset
* @len: node length
* @znode: znode to read to
*
* This function reads an indexing node from the flash media and fills znode
* with the read data. Returns zero in case of success and a negative error
* code in case of failure. The read indexing node is validated and if anything
* is wrong with it, this function prints complaint messages and returns
* %-EINVAL.
*/
static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
struct ubifs_znode *znode)
{
int i, err, type, cmp;
struct ubifs_idx_node *idx;
idx = kmalloc(c->max_idx_node_sz, GFP_NOFS);
if (!idx)
return -ENOMEM;
err = ubifs_read_node(c, idx, UBIFS_IDX_NODE, len, lnum, offs);
if (err < 0) {
kfree(idx);
return err;
}
znode->child_cnt = le16_to_cpu(idx->child_cnt);
znode->level = le16_to_cpu(idx->level);
dbg_tnc("LEB %d:%d, level %d, %d branch",
lnum, offs, znode->level, znode->child_cnt);
if (znode->child_cnt > c->fanout || znode->level > UBIFS_MAX_LEVELS) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "current fanout %d, branch count %d",
c->fanout, znode->child_cnt);
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "max levels %d, znode level %d",
UBIFS_MAX_LEVELS, znode->level);
err = 1;
goto out_dump;
}
for (i = 0; i < znode->child_cnt; i++) {
const struct ubifs_branch *br = ubifs_idx_branch(c, idx, i);
struct ubifs_zbranch *zbr = &znode->zbranch[i];
key_read(c, &br->key, &zbr->key);
zbr->lnum = le32_to_cpu(br->lnum);
zbr->offs = le32_to_cpu(br->offs);
zbr->len = le32_to_cpu(br->len);
zbr->znode = NULL;
/* Validate branch */
if (zbr->lnum < c->main_first ||
zbr->lnum >= c->leb_cnt || zbr->offs < 0 ||
zbr->offs + zbr->len > c->leb_size || zbr->offs & 7) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad branch %d", i);
err = 2;
goto out_dump;
}
switch (key_type(c, &zbr->key)) {
case UBIFS_INO_KEY:
case UBIFS_DATA_KEY:
case UBIFS_DENT_KEY:
case UBIFS_XENT_KEY:
break;
default:
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad key type at slot %d: %d",
i, key_type(c, &zbr->key));
err = 3;
goto out_dump;
}
if (znode->level)
continue;
type = key_type(c, &zbr->key);
if (c->ranges[type].max_len == 0) {
if (zbr->len != c->ranges[type].len) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad target node (type %d) length (%d)",
type, zbr->len);
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "have to be %d", c->ranges[type].len);
err = 4;
goto out_dump;
}
} else if (zbr->len < c->ranges[type].min_len ||
zbr->len > c->ranges[type].max_len) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad target node (type %d) length (%d)",
type, zbr->len);
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "have to be in range of %d-%d",
c->ranges[type].min_len,
c->ranges[type].max_len);
err = 5;
goto out_dump;
}
}
/*
* Ensure that the next key is greater or equivalent to the
* previous one.
*/
for (i = 0; i < znode->child_cnt - 1; i++) {
const union ubifs_key *key1, *key2;
key1 = &znode->zbranch[i].key;
key2 = &znode->zbranch[i + 1].key;
cmp = keys_cmp(c, key1, key2);
if (cmp > 0) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad key order (keys %d and %d)", i, i + 1);
err = 6;
goto out_dump;
} else if (cmp == 0 && !is_hash_key(c, key1)) {
/* These can only be keys with colliding hash */
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "keys %d and %d are not hashed but equivalent",
i, i + 1);
err = 7;
goto out_dump;
}
}
kfree(idx);
return 0;
out_dump:
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad indexing node at LEB %d:%d, error %d", lnum, offs, err);
ubifs_dump_node(c, idx);
kfree(idx);
return -EINVAL;
}
/**
* ubifs_load_znode - load znode to TNC cache.
* @c: UBIFS file-system description object
* @zbr: znode branch
* @parent: znode's parent
* @iip: index in parent
*
* This function loads znode pointed to by @zbr into the TNC cache and
* returns pointer to it in case of success and a negative error code in case
* of failure.
*/
struct ubifs_znode *ubifs_load_znode(struct ubifs_info *c,
struct ubifs_zbranch *zbr,
struct ubifs_znode *parent, int iip)
{
int err;
struct ubifs_znode *znode;
ubifs_assert(!zbr->znode);
/*
* A slab cache is not presently used for znodes because the znode size
* depends on the fanout which is stored in the superblock.
*/
znode = kzalloc(c->max_znode_sz, GFP_NOFS);
if (!znode)
return ERR_PTR(-ENOMEM);
err = read_znode(c, zbr->lnum, zbr->offs, zbr->len, znode);
if (err)
goto out;
atomic_long_inc(&c->clean_zn_cnt);
/*
* Increment the global clean znode counter as well. It is OK that
* global and per-FS clean znode counters may be inconsistent for some
* short time (because we might be preempted at this point), the global
* one is only used in shrinker.
*/
atomic_long_inc(&ubifs_clean_zn_cnt);
zbr->znode = znode;
znode->parent = parent;
znode->time = get_seconds();
znode->iip = iip;
return znode;
out:
kfree(znode);
return ERR_PTR(err);
}
/**
* ubifs_tnc_read_node - read a leaf node from the flash media.
* @c: UBIFS file-system description object
* @zbr: key and position of the node
* @node: node is returned here
*
* This function reads a node defined by @zbr from the flash media. Returns
* zero in case of success or a negative negative error code in case of
* failure.
*/
int ubifs_tnc_read_node(struct ubifs_info *c, struct ubifs_zbranch *zbr,
void *node)
{
union ubifs_key key1, *key = &zbr->key;
int err, type = key_type(c, key);
struct ubifs_wbuf *wbuf;
/*
* 'zbr' has to point to on-flash node. The node may sit in a bud and
* may even be in a write buffer, so we have to take care about this.
*/
wbuf = ubifs_get_wbuf(c, zbr->lnum);
if (wbuf)
err = ubifs_read_node_wbuf(wbuf, node, type, zbr->len,
zbr->lnum, zbr->offs);
else
err = ubifs_read_node(c, node, type, zbr->len, zbr->lnum,
zbr->offs);
if (err) {
dbg_tnck(key, "key ");
return err;
}
/* Make sure the key of the read node is correct */
key_read(c, node + UBIFS_KEY_OFFSET, &key1);
if (!keys_eq(c, key, &key1)) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 10:39:42 +00:00
ubifs_err(c, "bad key in node at LEB %d:%d",
zbr->lnum, zbr->offs);
dbg_tnck(key, "looked for key ");
dbg_tnck(&key1, "but found node's key ");
ubifs_dump_node(c, node);
return -EINVAL;
}
return 0;
}