kernel-ark/arch/arm/mach-at91/setup.c

536 lines
13 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include "at91_shdwc.h"
#include "soc.h"
#include "generic.h"
#include "pm.h"
struct at91_init_soc __initdata at91_boot_soc;
struct at91_socinfo at91_soc_initdata;
EXPORT_SYMBOL(at91_soc_initdata);
void __init at91rm9200_set_type(int type)
{
if (type == ARCH_REVISON_9200_PQFP)
at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
else
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
pr_info("AT91: filled in soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __init at91_init_irq_default(void)
{
at91_init_interrupts(at91_boot_soc.default_irq_priority);
}
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
at91_aic_init(priority, at91_boot_soc.extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
void __iomem *at91_ramc_base[2];
EXPORT_SYMBOL_GPL(at91_ramc_base);
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
if (id < 0 || id > 1) {
pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
BUG();
}
at91_ramc_base[id] = ioremap(addr, size);
if (!at91_ramc_base[id])
panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
}
static struct map_desc sram_desc[2] __initdata;
void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
{
struct map_desc *desc = &sram_desc[bank];
desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length;
if (bank > 0)
desc->virtual -= sram_desc[bank - 1].length;
desc->pfn = __phys_to_pfn(base);
desc->length = length;
desc->type = MT_MEMORY_RWX_NONCACHED;
pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
base, length, desc->virtual);
iotable_init(desc, 1);
}
static struct map_desc at91_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
};
static void __init soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9263_soc;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
case ARCH_ID_AT91SAM9G45:
at91_soc_initdata.type = AT91_SOC_SAM9G45;
if (cidr == ARCH_ID_AT91SAM9G45ES)
at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
at91_boot_soc = at91sam9g45_soc;
break;
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9rl_soc;
break;
case ARCH_ID_AT91SAM9X5:
at91_soc_initdata.type = AT91_SOC_SAM9X5;
at91_boot_soc = at91sam9x5_soc;
break;
case ARCH_ID_AT91SAM9N12:
at91_soc_initdata.type = AT91_SOC_SAM9N12;
at91_boot_soc = at91sam9n12_soc;
break;
case ARCH_ID_SAMA5D3:
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
at91_boot_soc = sama5d3_soc;
break;
}
/* at91sam9g10 */
ARM: at91: at91sam9g10: fix SOC type detection Newer at91sam9g10 SoC revision can't be detected, so the kernel can't boot with this kind of kernel panic: "AT91: Impossible to detect the SOC type" CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Atmel AT91SAM9G10-EK Ignoring tag cmdline (using the default kernel command line) bootconsole [earlycon0] enabled Memory policy: ECC disabled, Data cache writeback Kernel panic - not syncing: AT91: Impossible to detect the SOC type [<c00133d4>] (unwind_backtrace+0x0/0xe0) from [<c02366dc>] (panic+0x78/0x1cc) [<c02366dc>] (panic+0x78/0x1cc) from [<c02fa35c>] (at91_map_io+0x90/0xc8) [<c02fa35c>] (at91_map_io+0x90/0xc8) from [<c02f9860>] (paging_init+0x564/0x6d0) [<c02f9860>] (paging_init+0x564/0x6d0) from [<c02f7914>] (setup_arch+0x464/0x704) [<c02f7914>] (setup_arch+0x464/0x704) from [<c02f44f8>] (start_kernel+0x6c/0x2d4) [<c02f44f8>] (start_kernel+0x6c/0x2d4) from [<20008040>] (0x20008040) The reason for this is that the Debug Unit Chip ID Register has changed between Engineering Sample and definitive revision of the SoC. Changing the check of cidr to socid will address the problem. We do not integrate this check to the list just above because we also have to make sure that the extended id is disregarded. Signed-off-by: Ivan Shugov <ivan.shugov@gmail.com> [nicolas.ferre@atmel.com: change commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.1] # since commit 8c3583b6
2012-10-24 09:02:44 +00:00
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
}
/* at91sam9xe */
else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
at91_boot_soc = at91sam9260_soc;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9M10:
at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
break;
case ARCH_EXID_AT91SAM9G46:
at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
break;
case ARCH_EXID_AT91SAM9M11:
at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9G15:
at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
break;
case ARCH_EXID_AT91SAM9G35:
at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
break;
case ARCH_EXID_AT91SAM9X35:
at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
break;
case ARCH_EXID_AT91SAM9G25:
at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
break;
case ARCH_EXID_AT91SAM9X25:
at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D31:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
break;
case ARCH_EXID_SAMA5D33:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
break;
case ARCH_EXID_SAMA5D34:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
break;
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
case ARCH_EXID_SAMA5D36:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
break;
}
}
}
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
[AT91_SOC_SAM9G10] = "at91sam9g10",
[AT91_SOC_SAM9G20] = "at91sam9g20",
[AT91_SOC_SAM9G45] = "at91sam9g45",
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
{
return soc_name[c->type];
}
EXPORT_SYMBOL(at91_get_soc_type);
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
[AT91_SOC_SAM9G46] = "at91sam9g46",
[AT91_SOC_SAM9M11] = "at91sam9m11",
[AT91_SOC_SAM9G15] = "at91sam9g15",
[AT91_SOC_SAM9G35] = "at91sam9g35",
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SAMA5D31] = "sama5d31",
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SAMA5D36] = "sama5d36",
[AT91_SOC_SUBTYPE_NONE] = "None",
[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
{
return soc_subtype_name[c->subtype];
}
EXPORT_SYMBOL(at91_get_soc_subtype);
void __init at91_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
soc_detect(AT91_BASE_DBGU1);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
if (!at91_soc_is_enabled())
panic("AT91: Soc not enabled");
if (at91_boot_soc.map_io)
at91_boot_soc.map_io();
}
void __iomem *at91_shdwc_base = NULL;
static void at91sam9_poweroff(void)
{
at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
void __init at91_ioremap_shdwc(u32 base_addr)
{
at91_shdwc_base = ioremap(base_addr, 16);
if (!at91_shdwc_base)
panic("Impossible to ioremap at91_shdwc_base\n");
pm_power_off = at91sam9_poweroff;
}
void __iomem *at91_rstc_base;
void __init at91_ioremap_rstc(u32 base_addr)
{
at91_rstc_base = ioremap(base_addr, 16);
if (!at91_rstc_base)
panic("Impossible to ioremap at91_rstc_base\n");
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{
at91_matrix_base = ioremap(base_addr, 512);
if (!at91_matrix_base)
panic("Impossible to ioremap at91_matrix_base\n");
}
#if defined(CONFIG_OF)
static struct of_device_id rstc_ids[] = {
{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
{ /*sentinel*/ }
};
static void at91_dt_rstc(void)
{
struct device_node *np;
const struct of_device_id *of_id;
np = of_find_matching_node(NULL, rstc_ids);
if (!np)
panic("unable to find compatible rstc node in dtb\n");
at91_rstc_base = of_iomap(np, 0);
if (!at91_rstc_base)
panic("unable to map rstc cpu registers\n");
of_id = of_match_node(rstc_ids, np);
if (!of_id)
panic("AT91: rtsc no restart function available\n");
arm_pm_restart = of_id->data;
of_node_put(np);
}
static struct of_device_id ramc_ids[] = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
{ /*sentinel*/ }
};
static void at91_dt_ramc(void)
{
struct device_node *np;
const struct of_device_id *of_id;
np = of_find_matching_node(NULL, ramc_ids);
if (!np)
panic("unable to find compatible ram controller node in dtb\n");
at91_ramc_base[0] = of_iomap(np, 0);
if (!at91_ramc_base[0])
panic("unable to map ramc[0] cpu registers\n");
/* the controller may have 2 banks */
at91_ramc_base[1] = of_iomap(np, 1);
of_id = of_match_node(ramc_ids, np);
if (!of_id)
pr_warn("AT91: ramc no standby function available\n");
else
at91_pm_set_standby(of_id->data);
of_node_put(np);
}
static struct of_device_id shdwc_ids[] = {
{ .compatible = "atmel,at91sam9260-shdwc", },
{ .compatible = "atmel,at91sam9rl-shdwc", },
{ .compatible = "atmel,at91sam9x5-shdwc", },
{ /*sentinel*/ }
};
static const char *shdwc_wakeup_modes[] = {
[AT91_SHDW_WKMODE0_NONE] = "none",
[AT91_SHDW_WKMODE0_HIGH] = "high",
[AT91_SHDW_WKMODE0_LOW] = "low",
[AT91_SHDW_WKMODE0_ANYLEVEL] = "any",
};
const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
{
const char *pm;
int err, i;
err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
if (err < 0)
return AT91_SHDW_WKMODE0_ANYLEVEL;
for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
return i;
return -ENODEV;
}
static void at91_dt_shdwc(void)
{
struct device_node *np;
int wakeup_mode;
u32 reg;
u32 mode = 0;
np = of_find_matching_node(NULL, shdwc_ids);
if (!np) {
pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n");
return;
}
at91_shdwc_base = of_iomap(np, 0);
if (!at91_shdwc_base)
panic("AT91: unable to map shdwc cpu registers\n");
wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
if (wakeup_mode < 0) {
pr_warn("AT91: shdwc unknown wakeup mode\n");
goto end;
}
if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
if (reg > AT91_SHDW_CPTWK0_MAX) {
pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
reg = AT91_SHDW_CPTWK0_MAX;
}
mode |= AT91_SHDW_CPTWK0_(reg);
}
if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
mode |= AT91_SHDW_RTCWKEN;
if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
mode |= AT91_SHDW_RTTWKEN;
at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
end:
pm_power_off = at91sam9_poweroff;
of_node_put(np);
}
void __init at91rm9200_dt_initialize(void)
{
at91_dt_ramc();
/* Init clock subsystem */
at91_dt_clock_init();
/* Register the processor-specific clocks */
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 07:37:46 +00:00
if (at91_boot_soc.register_clocks)
at91_boot_soc.register_clocks();
at91_boot_soc.init();
}
void __init at91_dt_initialize(void)
{
at91_dt_rstc();
at91_dt_ramc();
at91_dt_shdwc();
/* Init clock subsystem */
at91_dt_clock_init();
/* Register the processor-specific clocks */
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 07:37:46 +00:00
if (at91_boot_soc.register_clocks)
at91_boot_soc.register_clocks();
if (at91_boot_soc.init)
at91_boot_soc.init();
}
#endif
void __init at91_initialize(unsigned long main_clock)
{
at91_boot_soc.ioremap_registers();
/* Init clock subsystem */
at91_clock_init(main_clock);
/* Register the processor-specific clocks */
at91_boot_soc.register_clocks();
at91_boot_soc.init();
pinctrl_provide_dummies();
}