davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
300c627fbc
kernel-ark/include/xen/xen-ops.h

50 lines
1.3 KiB
C
Raw Normal View History

xen: move events.c to drivers/xen for IA64/Xen support move arch/x86/xen/events.c undedr drivers/xen to share codes with x86 and ia64. And minor adjustment to compile. ia64/xen also uses events.c Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-02 17:53:55 +00:00
#ifndef INCLUDE_XEN_OPS_H
#define INCLUDE_XEN_OPS_H
#include <linux/percpu.h>
xen/acpi-processor: fix enabling interrupts on syscore_resume syscore->resume() callback is expected to do not enable interrupts, it generates warning like below otherwise: [ 9386.365390] WARNING: CPU: 0 PID: 6733 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0() [ 9386.365403] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor] ... [ 9386.365429] Call Trace: [ 9386.365434] [<ffffffff81667a8b>] dump_stack+0x45/0x56 [ 9386.365437] [<ffffffff8106921d>] warn_slowpath_common+0x7d/0xa0 [ 9386.365439] [<ffffffff8106928c>] warn_slowpath_fmt+0x4c/0x50 [ 9386.365442] [<ffffffffa0261bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] [ 9386.365443] [<ffffffff814055fa>] syscore_resume+0x9a/0xe0 [ 9386.365445] [<ffffffff810aef42>] suspend_devices_and_enter+0x402/0x470 [ 9386.365447] [<ffffffff810af128>] pm_suspend+0x178/0x260 On xen_acpi_processor_resume() we call various procedures, which are non atomic and can enable interrupts. To prevent the issue introduce separate resume notify called after we enable interrupts on resume and before we call other drivers resume callbacks. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-26 10:30:30 +00:00
#include <linux/notifier.h>
xen: Put EFI machinery in place This patch enables EFI usage under Xen dom0. Standard EFI Linux Kernel infrastructure cannot be used because it requires direct access to EFI data and code. However, in dom0 case it is not possible because above mentioned EFI stuff is fully owned and controlled by Xen hypervisor. In this case all calls from dom0 to EFI must be requested via special hypercall which in turn executes relevant EFI code in behalf of dom0. When dom0 kernel boots it checks for EFI availability on a machine. If it is detected then artificial EFI system table is filled. Native EFI callas are replaced by functions which mimics them by calling relevant hypercall. Later pointer to EFI system table is passed to standard EFI machinery and it continues EFI subsystem initialization taking into account that there is no direct access to EFI boot services, runtime, tables, structures, etc. After that system runs as usual. This patch is based on Jan Beulich and Tang Liang work. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Tang Liang <liang.tang@oracle.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-06-30 17:53:02 +00:00
#include <linux/efi.h>
xen: correctly use xen_pfn_t in remap_domain_mfn_range. For Xen on ARM a PFN is 64 bits so we need to use the appropriate type here. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: include the necessary header, Reported-by: Fengguang Wu <fengguang.wu@intel.com> ]
2012-10-16 16:19:15 +00:00
#include <asm/xen/interface.h>
xen: move events.c to drivers/xen for IA64/Xen support move arch/x86/xen/events.c undedr drivers/xen to share codes with x86 and ia64. And minor adjustment to compile. ia64/xen also uses events.c Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-02 17:53:55 +00:00
DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu);
xen: suspend: add "arch" to pre/post suspend hooks xen_pre_device_suspend is unused on ia64. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-17 11:04:20 +00:00
void xen_arch_pre_suspend(void);
void xen_arch_post_suspend(int suspend_cancelled);
xen: implement save/restore This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:31:27 +00:00
xen: add xen_arch_resume()/xen_timer_resume hook for ia64 support add xen_timer_resume() hook. Timer resume should be done after event channel is resumed. add xen_arch_resume() hook when ipi becomes usable after resume. After resume, some cpu specific resource must be reinitialized on ia64 that can't be set by another cpu. However available hooks is run once on only one cpu so that ipi has to be used. During stop_machine_run() ipi can't be used because interrupt is masked. So add another hook after stop_machine_run(). Another approach might be use resume hook which is run by device_resume(). However device_resume() may be executed on suspend error recovery path. So it is necessary to determine whether it is executed on real resume path or error recovery path. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:32 +00:00
void xen_timer_resume(void);
void xen_arch_resume(void);
xen/acpi-processor: fix enabling interrupts on syscore_resume syscore->resume() callback is expected to do not enable interrupts, it generates warning like below otherwise: [ 9386.365390] WARNING: CPU: 0 PID: 6733 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0() [ 9386.365403] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor] ... [ 9386.365429] Call Trace: [ 9386.365434] [<ffffffff81667a8b>] dump_stack+0x45/0x56 [ 9386.365437] [<ffffffff8106921d>] warn_slowpath_common+0x7d/0xa0 [ 9386.365439] [<ffffffff8106928c>] warn_slowpath_fmt+0x4c/0x50 [ 9386.365442] [<ffffffffa0261bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor] [ 9386.365443] [<ffffffff814055fa>] syscore_resume+0x9a/0xe0 [ 9386.365445] [<ffffffff810aef42>] suspend_devices_and_enter+0x402/0x470 [ 9386.365447] [<ffffffff810af128>] pm_suspend+0x178/0x260 On xen_acpi_processor_resume() we call various procedures, which are non atomic and can enable interrupts. To prevent the issue introduce separate resume notify called after we enable interrupts on resume and before we call other drivers resume callbacks. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-26 10:30:30 +00:00
void xen_resume_notifier_register(struct notifier_block *nb);
void xen_resume_notifier_unregister(struct notifier_block *nb);
xen: Add suspend/resume support for PV on HVM guests. Suspend/resume requires few different things on HVM: the suspend hypercall is different; we don't need to save/restore memory related settings; except the shared info page and the callback mechanism. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-05-14 11:45:07 +00:00
int xen_setup_shutdown_event(void);
xen: Add xen_create_contiguous_region A memory region must be physically contiguous in order to be accessed through DMA. This patch adds xen_create_contiguous_region, which ensures a region of contiguous virtual memory is also physically contiguous. Based on Stephen Tweedie's port of the 2.6.18-xen version. Remove contiguous_bitmap[] as it's no longer needed. Ported from linux-2.6.18-xen.hg 707:e410857fd83c [ Impact: add Xen-internal API to make pages phys-contig ] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2009-02-09 20:05:46 +00:00
extern unsigned long *xen_contiguous_bitmap;
swiotlb-xen: use xen_alloc/free_coherent_pages Use xen_alloc_coherent_pages and xen_free_coherent_pages to allocate or free coherent pages. We need to be careful handling the pointer returned by xen_alloc_coherent_pages, because on ARM the pointer is not equal to phys_to_virt(*dma_handle). In fact virt_to_phys only works for kernel direct mapped RAM memory. In ARM case the pointer could be an ioremap address, therefore passing it to virt_to_phys would give you another physical address that doesn't correspond to it. Make xen_create_contiguous_region take a phys_addr_t as start parameter to avoid the virt_to_phys calls which would be incorrect. Changes in v6: - remove extra spaces. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-10-10 13:41:10 +00:00
int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
xen: make xen_create_contiguous_region return the dma address Modify xen_create_contiguous_region to return the dma address of the newly contiguous buffer. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Changes in v4: - use virt_to_machine instead of virt_to_bus.
2013-10-09 16:56:32 +00:00
unsigned int address_bits,
dma_addr_t *dma_handle);
xen: Add xen_create_contiguous_region A memory region must be physically contiguous in order to be accessed through DMA. This patch adds xen_create_contiguous_region, which ensures a region of contiguous virtual memory is also physically contiguous. Based on Stephen Tweedie's port of the 2.6.18-xen version. Remove contiguous_bitmap[] as it's no longer needed. Ported from linux-2.6.18-xen.hg 707:e410857fd83c [ Impact: add Xen-internal API to make pages phys-contig ] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2009-02-09 20:05:46 +00:00
swiotlb-xen: use xen_alloc/free_coherent_pages Use xen_alloc_coherent_pages and xen_free_coherent_pages to allocate or free coherent pages. We need to be careful handling the pointer returned by xen_alloc_coherent_pages, because on ARM the pointer is not equal to phys_to_virt(*dma_handle). In fact virt_to_phys only works for kernel direct mapped RAM memory. In ARM case the pointer could be an ioremap address, therefore passing it to virt_to_phys would give you another physical address that doesn't correspond to it. Make xen_create_contiguous_region take a phys_addr_t as start parameter to avoid the virt_to_phys calls which would be incorrect. Changes in v6: - remove extra spaces. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-10-10 13:41:10 +00:00
void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order);
xen: Add xen_create_contiguous_region A memory region must be physically contiguous in order to be accessed through DMA. This patch adds xen_create_contiguous_region, which ensures a region of contiguous virtual memory is also physically contiguous. Based on Stephen Tweedie's port of the 2.6.18-xen version. Remove contiguous_bitmap[] as it's no longer needed. Ported from linux-2.6.18-xen.hg 707:e410857fd83c [ Impact: add Xen-internal API to make pages phys-contig ] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2009-02-09 20:05:46 +00:00
Disintegrate asm/system.h for IA64 Disintegrate asm/system.h for IA64. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> cc: linux-ia64@vger.kernel.org
2012-03-28 17:30:02 +00:00
struct vm_area_struct;
xen/privcmd: move remap_domain_mfn_range() to core xen code and export. This allows xenfs to be built as a module, previously it required flush_tlb_all and arbitrary_virt_to_machine to be exported. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-05-21 09:09:46 +00:00
int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
unsigned long addr,
xen: correctly use xen_pfn_t in remap_domain_mfn_range. For Xen on ARM a PFN is 64 bits so we need to use the appropriate type here. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: include the necessary header, Reported-by: Fengguang Wu <fengguang.wu@intel.com> ]
2012-10-16 16:19:15 +00:00
xen_pfn_t mfn, int nr,
xen: add pages parameter to xen_remap_domain_mfn_range Also introduce xen_unmap_domain_mfn_range. These are the parts of Mukesh's "xen/pvh: Implement MMU changes for PVH" which are also needed as a baseline for ARM privcmd support. The original patch was: Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> This derivative is also: Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
2012-10-17 20:37:49 +00:00
pgprot_t prot, unsigned domid,
struct page **pages);
int xen_unmap_domain_mfn_range(struct vm_area_struct *vma,
int numpgs, struct page **pages);
xen/privcmd: move remap_domain_mfn_range() to core xen code and export. This allows xenfs to be built as a module, previously it required flush_tlb_all and arbitrary_virt_to_machine to be exported. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-05-21 09:09:46 +00:00
xen/acpi: Move the xen_running_on_version_or_later function. As on ia64 builds we get: include/xen/interface/version.h: In function 'xen_running_on_version_or_later': include/xen/interface/version.h:76: error: implicit declaration of function 'HYPERVISOR_xen_version' We can later on make this function exportable if there are modules using part of it. For right now the only two users are built-in. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-27 16:39:40 +00:00
bool xen_running_on_version_or_later(unsigned int major, unsigned int minor);
xen: Put EFI machinery in place This patch enables EFI usage under Xen dom0. Standard EFI Linux Kernel infrastructure cannot be used because it requires direct access to EFI data and code. However, in dom0 case it is not possible because above mentioned EFI stuff is fully owned and controlled by Xen hypervisor. In this case all calls from dom0 to EFI must be requested via special hypercall which in turn executes relevant EFI code in behalf of dom0. When dom0 kernel boots it checks for EFI availability on a machine. If it is detected then artificial EFI system table is filled. Native EFI callas are replaced by functions which mimics them by calling relevant hypercall. Later pointer to EFI system table is passed to standard EFI machinery and it continues EFI subsystem initialization taking into account that there is no direct access to EFI boot services, runtime, tables, structures, etc. After that system runs as usual. This patch is based on Jan Beulich and Tang Liang work. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Tang Liang <liang.tang@oracle.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-06-30 17:53:02 +00:00
#ifdef CONFIG_XEN_EFI
extern efi_system_table_t *xen_efi_probe(void);
#else
xen: Silence compiler warnings Add inline keyword to silence the following compiler warnings if xen_efi_probe() is not used: CC arch/x86/xen/setup.o In file included from arch/x86/xen/xen-ops.h:7:0, from arch/x86/xen/setup.c:31: include/xen/xen-ops.h:43:35: warning: ‘xen_efi_probe’ defined but not used [-Wunused-function] Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-12 21:09:47 +00:00
static inline efi_system_table_t __init *xen_efi_probe(void)
xen: Put EFI machinery in place This patch enables EFI usage under Xen dom0. Standard EFI Linux Kernel infrastructure cannot be used because it requires direct access to EFI data and code. However, in dom0 case it is not possible because above mentioned EFI stuff is fully owned and controlled by Xen hypervisor. In this case all calls from dom0 to EFI must be requested via special hypercall which in turn executes relevant EFI code in behalf of dom0. When dom0 kernel boots it checks for EFI availability on a machine. If it is detected then artificial EFI system table is filled. Native EFI callas are replaced by functions which mimics them by calling relevant hypercall. Later pointer to EFI system table is passed to standard EFI machinery and it continues EFI subsystem initialization taking into account that there is no direct access to EFI boot services, runtime, tables, structures, etc. After that system runs as usual. This patch is based on Jan Beulich and Tang Liang work. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Tang Liang <liang.tang@oracle.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-06-30 17:53:02 +00:00
{
return NULL;
}
#endif
xen: move events.c to drivers/xen for IA64/Xen support move arch/x86/xen/events.c undedr drivers/xen to share codes with x86 and ia64. And minor adjustment to compile. ia64/xen also uses events.c Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-02 17:53:55 +00:00
#endif /* INCLUDE_XEN_OPS_H */
Reference in New Issue Copy Permalink