davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
270d013659
kernel-ark/arch/powerpc/configs/maple_defconfig

136 lines
3.1 KiB
Plaintext
Raw Normal View History

[PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 03:40:25 +00:00
CONFIG_PPC64=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 06:51:51 +00:00
CONFIG_SMP=y
CONFIG_NR_CPUS=4
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigs CONFIG_FHANDLE is a requirement for systemd and with the increasing uptake of systemd within distros it makes sense for 64 bit defconfigs to include it. Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>
2014-09-05 01:16:43 +00:00
CONFIG_FHANDLE=y
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 06:36:53 +00:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 03:31:55 +00:00
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 06:51:51 +00:00
# CONFIG_BLK_DEV_BSG is not set
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 06:36:53 +00:00
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
powerpc: Don't build powernv for other platform defconfigs Because powernv arrived after these other platforms, the defconfigs didn't have PPC_POWERNV disabled, and being default y it gets turned on. If we're going to bother having defconfigs for the specific platforms then they should only build the code required for those platforms. The grab bag of everything config is ppc64_defconfig. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-24 05:57:10 +00:00
# CONFIG_PPC_POWERNV is not set
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
[POWERPC] Update defconfigs Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22 11:39:24 +00:00
CONFIG_UDBG_RTAS_CONSOLE=y
[PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 03:40:25 +00:00
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 04:19:35 +00:00
CONFIG_PCI_MSI=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-10 01:04:36 +00:00
CONFIG_XFRM_USER=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
[POWERPC] Update defconfigs This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 05:53:35 +00:00
# CONFIG_INET_LRO is not set
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
# CONFIG_IPV6 is not set
[POWERPC] Update defconfigs This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 05:53:35 +00:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_AMD74XX=y
[POWERPC] maple: Enable ipr driver in defconfig Some machines supported by the maple platform have an Obsidian controller which can't be used without enabling CONFIG_IPR and the options on which it depends. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-12 23:43:05 +00:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_IPR=y
CONFIG_ATA=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_NETDEVICES=y
CONFIG_AMD8111_ETH=y
[POWERPC] Turn on tigon3 support in maple_defconfig I think that most people who use maple_defconfig are doing so for a JS21, so it might make sense to turn Tigon3 support on by default. Built and booted on a JS21. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-01 19:44:11 +00:00
CONFIG_TIGON3=y
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 06:36:53 +00:00
CONFIG_E1000=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 04:19:35 +00:00
CONFIG_USB_PEGASUS=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
[POWERPC] Update defconfigs Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22 11:39:24 +00:00
CONFIG_HVC_RTAS=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-10 01:04:36 +00:00
# CONFIG_HW_RANDOM is not set
[PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 03:40:25 +00:00
CONFIG_GEN_RTC=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AMD8111=y
# CONFIG_VGA_CONSOLE is not set
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 08:39:26 +00:00
CONFIG_HID_GYRATION=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SUNPLUS=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_USB=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 03:31:55 +00:00
CONFIG_USB_MON=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 03:31:55 +00:00
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_TI=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 08:39:26 +00:00
CONFIG_EXT4_FS=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_UTF8=y
[PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 03:40:25 +00:00
CONFIG_CRC_CCITT=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 03:31:55 +00:00
CONFIG_CRC_T10DIF=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_MAGIC_SYSRQ=y
powerpc: update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-15 05:22:54 +00:00
CONFIG_DEBUG_KERNEL=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_DEBUG_STACK_USAGE=y
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 06:36:53 +00:00
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_LATENCYTOP=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 04:24:57 +00:00
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
[PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 03:40:25 +00:00
CONFIG_BOOTX_TEXT=y
powerpc: Update default configurations Update default configurations for systems with CONFIG_BOOTX_TEXT selected so that they continue to print early debug messages as is currently the case. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-29 03:42:44 +00:00
CONFIG_PPC_EARLY_DEBUG=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 03:31:55 +00:00
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 08:39:26 +00:00
# CONFIG_CRYPTO_ANSI_CPRNG is not set
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 06:51:51 +00:00
# CONFIG_CRYPTO_HW is not set
Reference in New Issue Copy Permalink