2006-01-16 16:50:04 +00:00
|
|
|
/*
|
|
|
|
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
|
2008-01-29 04:31:39 +00:00
|
|
|
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
|
2006-01-16 16:50:04 +00:00
|
|
|
*
|
|
|
|
* This copyrighted material is made available to anyone wishing to use,
|
|
|
|
* modify, copy, or redistribute it subject to the terms and conditions
|
2006-09-01 15:05:15 +00:00
|
|
|
* of the GNU General Public License version 2.
|
2006-01-16 16:50:04 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __INCORE_DOT_H__
|
|
|
|
#define __INCORE_DOT_H__
|
|
|
|
|
2006-09-05 14:39:21 +00:00
|
|
|
#include <linux/fs.h>
|
2011-01-10 06:18:25 +00:00
|
|
|
#include <linux/kobject.h>
|
[GFS2] delay glock demote for a minimum hold time
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in
a cluster, it will deadlock. The reason is that do_no_page() will repeatedly
call gfs2_sharewrite_nopage(), because each node keeps giving up the glock
too early, and is forced to call unmap_mapping_range(). This bumps the
mapping->truncate_count sequence count, forcing do_no_page() to retry. This
patch institutes a minimum glock hold time a tenth a second. This insures
that even in heavy contention cases, the node has enough time to get some
useful work done before it gives up the glock.
A second issue is that when gfs2_glock_dq() is called from within a page fault
to demote a lock, and the associated page needs to be written out, it will
try to acqire a lock on it, but it has already been locked at a higher level.
This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this
issue. This is the same patch as Steve Whitehouse originally proposed to fix
this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock
before it queues up the work on it.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-23 18:19:05 +00:00
|
|
|
#include <linux/workqueue.h>
|
2009-01-12 10:43:39 +00:00
|
|
|
#include <linux/dlm.h>
|
|
|
|
#include <linux/buffer_head.h>
|
2011-01-19 09:30:01 +00:00
|
|
|
#include <linux/rcupdate.h>
|
|
|
|
#include <linux/rculist_bl.h>
|
2011-07-11 07:53:30 +00:00
|
|
|
#include <linux/completion.h>
|
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.
Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.
Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.
However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.
The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.
This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.
The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.
In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
|
|
|
#include <linux/rbtree.h>
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
#include <linux/ktime.h>
|
|
|
|
#include <linux/percpu.h>
|
2013-10-15 14:18:08 +00:00
|
|
|
#include <linux/lockref.h>
|
2006-09-05 14:39:21 +00:00
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
#define DIO_WAIT 0x00000010
|
|
|
|
#define DIO_METADATA 0x00000020
|
|
|
|
|
|
|
|
struct gfs2_log_operations;
|
2012-05-01 16:00:34 +00:00
|
|
|
struct gfs2_bufdata;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_holder;
|
|
|
|
struct gfs2_glock;
|
|
|
|
struct gfs2_quota_data;
|
|
|
|
struct gfs2_trans;
|
|
|
|
struct gfs2_jdesc;
|
|
|
|
struct gfs2_sbd;
|
2009-01-12 10:43:39 +00:00
|
|
|
struct lm_lockops;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
typedef void (*gfs2_glop_bh_t) (struct gfs2_glock *gl, unsigned int ret);
|
|
|
|
|
2007-06-01 13:11:58 +00:00
|
|
|
struct gfs2_log_header_host {
|
|
|
|
u64 lh_sequence; /* Sequence number of this transaction */
|
|
|
|
u32 lh_flags; /* GFS2_LOG_HEAD_... */
|
|
|
|
u32 lh_tail; /* Block number of log tail */
|
|
|
|
u32 lh_blkno;
|
|
|
|
u32 lh_hash;
|
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
/*
|
|
|
|
* Structure of operations that are associated with each
|
|
|
|
* type of element in the log.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct gfs2_log_operations {
|
2014-02-21 15:22:35 +00:00
|
|
|
void (*lo_before_commit) (struct gfs2_sbd *sdp, struct gfs2_trans *tr);
|
GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-06 01:31:46 +00:00
|
|
|
void (*lo_after_commit) (struct gfs2_sbd *sdp, struct gfs2_trans *tr);
|
2006-01-16 16:50:04 +00:00
|
|
|
void (*lo_before_scan) (struct gfs2_jdesc *jd,
|
2006-10-14 01:47:13 +00:00
|
|
|
struct gfs2_log_header_host *head, int pass);
|
2006-01-16 16:50:04 +00:00
|
|
|
int (*lo_scan_elements) (struct gfs2_jdesc *jd, unsigned int start,
|
|
|
|
struct gfs2_log_descriptor *ld, __be64 *ptr,
|
|
|
|
int pass);
|
|
|
|
void (*lo_after_scan) (struct gfs2_jdesc *jd, int error, int pass);
|
2006-04-07 15:17:32 +00:00
|
|
|
const char *lo_name;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2009-05-21 11:23:12 +00:00
|
|
|
#define GBF_FULL 1
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_bitmap {
|
|
|
|
struct buffer_head *bi_bh;
|
|
|
|
char *bi_clone;
|
2009-05-21 11:23:12 +00:00
|
|
|
unsigned long bi_flags;
|
2006-09-04 16:49:07 +00:00
|
|
|
u32 bi_offset;
|
|
|
|
u32 bi_start;
|
|
|
|
u32 bi_len;
|
2013-09-11 18:44:02 +00:00
|
|
|
u32 bi_blocks;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_rgrpd {
|
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.
Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.
Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.
However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.
The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.
This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.
The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.
In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
|
|
|
struct rb_node rd_node; /* Link with superblock */
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_glock *rd_gl; /* Glock for this rgrp */
|
2007-06-01 13:11:58 +00:00
|
|
|
u64 rd_addr; /* grp block disk address */
|
|
|
|
u64 rd_data0; /* first data location */
|
|
|
|
u32 rd_length; /* length of rgrp header in fs blocks */
|
|
|
|
u32 rd_data; /* num of data blocks in rgrp */
|
|
|
|
u32 rd_bitbytes; /* number of bytes in data bitmaps */
|
2008-11-04 10:25:13 +00:00
|
|
|
u32 rd_free;
|
2012-07-19 12:12:40 +00:00
|
|
|
u32 rd_reserved; /* number of blocks reserved */
|
2008-11-04 10:32:57 +00:00
|
|
|
u32 rd_free_clone;
|
|
|
|
u32 rd_dinodes;
|
2008-11-04 10:19:03 +00:00
|
|
|
u64 rd_igeneration;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_bitmap *rd_bits;
|
|
|
|
struct gfs2_sbd *rd_sbd;
|
GFS2: Use lvbs for storing rgrp information with mount option
Instead of reading in the resource groups when gfs2 is checking
for free space to allocate from, gfs2 can store the necessary infromation
in the resource group's lvb. Also, instead of searching for unlinked
inodes in every resource group that's checked for free space, gfs2 can
store the number of unlinked but inodes in the lvb, and only check for
unlinked inodes if it will find some.
The first time a resource group is locked, the lvb must initialized.
Since this involves counting the unlinked inodes in the resource group,
this takes a little extra time. But after that, if the resource group
is locked with GL_SKIP, the buffer head won't be read in unless it's
actually needed.
Enabling the resource groups lvbs is done via the rgrplvb mount option. If
this option isn't set, the lvbs will still be set and updated, but they won't
be verfied or used by the filesystem. To safely turn on this option, all of
the nodes mounting the filesystem must be running code with this patch, and
the filesystem must have been completely unmounted since they were updated.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-05-30 04:01:09 +00:00
|
|
|
struct gfs2_rgrp_lvb *rd_rgl;
|
2008-11-04 10:32:57 +00:00
|
|
|
u32 rd_last_alloc;
|
2009-05-21 14:18:19 +00:00
|
|
|
u32 rd_flags;
|
2013-11-25 11:16:25 +00:00
|
|
|
u32 rd_extfail_pt; /* extent failure point */
|
2009-05-20 09:48:47 +00:00
|
|
|
#define GFS2_RDF_CHECK 0x10000000 /* check for unlinked inodes */
|
|
|
|
#define GFS2_RDF_UPTODATE 0x20000000 /* rg is up to date */
|
|
|
|
#define GFS2_RDF_ERROR 0x40000000 /* error in rg */
|
2014-10-29 13:02:28 +00:00
|
|
|
#define GFS2_RDF_PREFERRED 0x80000000 /* This rgrp is preferred */
|
2009-05-20 09:48:47 +00:00
|
|
|
#define GFS2_RDF_MASK 0xf0000000 /* mask for internal flags */
|
2012-07-19 12:12:40 +00:00
|
|
|
spinlock_t rd_rsspin; /* protects reservation related vars */
|
|
|
|
struct rb_root rd_rstree; /* multi-block reservation tree */
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2012-07-31 14:21:20 +00:00
|
|
|
struct gfs2_rbm {
|
|
|
|
struct gfs2_rgrpd *rgd;
|
|
|
|
u32 offset; /* The offset is bitmap relative */
|
2013-09-17 17:12:15 +00:00
|
|
|
int bii; /* Bitmap index */
|
2012-07-31 14:21:20 +00:00
|
|
|
};
|
|
|
|
|
2013-09-17 17:12:15 +00:00
|
|
|
static inline struct gfs2_bitmap *rbm_bi(const struct gfs2_rbm *rbm)
|
|
|
|
{
|
|
|
|
return rbm->rgd->rd_bits + rbm->bii;
|
|
|
|
}
|
|
|
|
|
2012-07-31 14:21:20 +00:00
|
|
|
static inline u64 gfs2_rbm_to_block(const struct gfs2_rbm *rbm)
|
|
|
|
{
|
2013-09-17 17:12:15 +00:00
|
|
|
return rbm->rgd->rd_data0 + (rbm_bi(rbm)->bi_start * GFS2_NBBY) +
|
|
|
|
rbm->offset;
|
2012-07-31 14:21:20 +00:00
|
|
|
}
|
|
|
|
|
2012-08-01 19:35:05 +00:00
|
|
|
static inline bool gfs2_rbm_eq(const struct gfs2_rbm *rbm1,
|
|
|
|
const struct gfs2_rbm *rbm2)
|
|
|
|
{
|
2013-09-17 17:12:15 +00:00
|
|
|
return (rbm1->rgd == rbm2->rgd) && (rbm1->bii == rbm2->bii) &&
|
2012-08-01 19:35:05 +00:00
|
|
|
(rbm1->offset == rbm2->offset);
|
|
|
|
}
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
enum gfs2_state_bits {
|
|
|
|
BH_Pinned = BH_PrivateStart,
|
2006-01-30 18:34:10 +00:00
|
|
|
BH_Escaped = BH_PrivateStart + 1,
|
2011-09-12 23:15:24 +00:00
|
|
|
BH_Zeronew = BH_PrivateStart + 2,
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
BUFFER_FNS(Pinned, pinned)
|
|
|
|
TAS_BUFFER_FNS(Pinned, pinned)
|
2006-01-30 18:34:10 +00:00
|
|
|
BUFFER_FNS(Escaped, escaped)
|
|
|
|
TAS_BUFFER_FNS(Escaped, escaped)
|
2011-09-12 23:15:24 +00:00
|
|
|
BUFFER_FNS(Zeronew, zeronew)
|
|
|
|
TAS_BUFFER_FNS(Zeronew, zeronew)
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
struct gfs2_bufdata {
|
|
|
|
struct buffer_head *bd_bh;
|
|
|
|
struct gfs2_glock *bd_gl;
|
2012-04-16 15:40:56 +00:00
|
|
|
u64 bd_blkno;
|
2007-09-02 14:39:43 +00:00
|
|
|
|
2012-05-01 16:00:34 +00:00
|
|
|
struct list_head bd_list;
|
|
|
|
const struct gfs2_log_operations *bd_ops;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-06 01:31:46 +00:00
|
|
|
struct gfs2_trans *bd_tr;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct list_head bd_ail_st_list;
|
|
|
|
struct list_head bd_ail_gl_list;
|
|
|
|
};
|
|
|
|
|
2009-01-12 10:43:39 +00:00
|
|
|
/*
|
|
|
|
* Internally, we prefix things with gdlm_ and GDLM_ (for gfs-dlm) since a
|
|
|
|
* prefix of lock_dlm_ gets awkward.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define GDLM_STRNAME_BYTES 25
|
|
|
|
#define GDLM_LVB_SIZE 32
|
|
|
|
|
2012-01-09 22:18:05 +00:00
|
|
|
/*
|
|
|
|
* ls_recover_flags:
|
|
|
|
*
|
|
|
|
* DFL_BLOCK_LOCKS: dlm is in recovery and will grant locks that had been
|
|
|
|
* held by failed nodes whose journals need recovery. Those locks should
|
|
|
|
* only be used for journal recovery until the journal recovery is done.
|
|
|
|
* This is set by the dlm recover_prep callback and cleared by the
|
|
|
|
* gfs2_control thread when journal recovery is complete. To avoid
|
|
|
|
* races between recover_prep setting and gfs2_control clearing, recover_spin
|
|
|
|
* is held while changing this bit and reading/writing recover_block
|
|
|
|
* and recover_start.
|
|
|
|
*
|
|
|
|
* DFL_NO_DLM_OPS: dlm lockspace ops/callbacks are not being used.
|
|
|
|
*
|
|
|
|
* DFL_FIRST_MOUNT: this node is the first to mount this fs and is doing
|
|
|
|
* recovery of all journals before allowing other nodes to mount the fs.
|
|
|
|
* This is cleared when FIRST_MOUNT_DONE is set.
|
|
|
|
*
|
|
|
|
* DFL_FIRST_MOUNT_DONE: this node was the first mounter, and has finished
|
|
|
|
* recovery of all journals, and now allows other nodes to mount the fs.
|
|
|
|
*
|
|
|
|
* DFL_MOUNT_DONE: gdlm_mount has completed successfully and cleared
|
|
|
|
* BLOCK_LOCKS for the first time. The gfs2_control thread should now
|
|
|
|
* control clearing BLOCK_LOCKS for further recoveries.
|
|
|
|
*
|
|
|
|
* DFL_UNMOUNT: gdlm_unmount sets to keep sdp off gfs2_control_wq.
|
|
|
|
*
|
|
|
|
* DFL_DLM_RECOVERY: set while dlm is in recovery, between recover_prep()
|
|
|
|
* and recover_done(), i.e. set while recover_block == recover_start.
|
|
|
|
*/
|
|
|
|
|
2009-01-12 10:43:39 +00:00
|
|
|
enum {
|
|
|
|
DFL_BLOCK_LOCKS = 0,
|
2012-01-09 22:18:05 +00:00
|
|
|
DFL_NO_DLM_OPS = 1,
|
|
|
|
DFL_FIRST_MOUNT = 2,
|
|
|
|
DFL_FIRST_MOUNT_DONE = 3,
|
|
|
|
DFL_MOUNT_DONE = 4,
|
|
|
|
DFL_UNMOUNT = 5,
|
|
|
|
DFL_DLM_RECOVERY = 6,
|
2009-01-12 10:43:39 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct lm_lockname {
|
|
|
|
u64 ln_number;
|
|
|
|
unsigned int ln_type;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define lm_name_equal(name1, name2) \
|
|
|
|
(((name1)->ln_number == (name2)->ln_number) && \
|
|
|
|
((name1)->ln_type == (name2)->ln_type))
|
|
|
|
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_glock_operations {
|
2012-10-24 18:41:05 +00:00
|
|
|
void (*go_sync) (struct gfs2_glock *gl);
|
2008-05-21 16:03:22 +00:00
|
|
|
int (*go_xmote_bh) (struct gfs2_glock *gl, struct gfs2_holder *gh);
|
2006-11-20 15:37:45 +00:00
|
|
|
void (*go_inval) (struct gfs2_glock *gl, int flags);
|
2008-11-20 13:39:47 +00:00
|
|
|
int (*go_demote_ok) (const struct gfs2_glock *gl);
|
2006-11-20 15:37:45 +00:00
|
|
|
int (*go_lock) (struct gfs2_holder *gh);
|
|
|
|
void (*go_unlock) (struct gfs2_holder *gh);
|
2014-01-16 10:31:13 +00:00
|
|
|
void (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl);
|
2013-04-10 09:26:55 +00:00
|
|
|
void (*go_callback)(struct gfs2_glock *gl, bool remote);
|
2006-08-30 13:30:00 +00:00
|
|
|
const int go_type;
|
2009-12-08 12:12:13 +00:00
|
|
|
const unsigned long go_flags;
|
|
|
|
#define GLOF_ASPACE 1
|
2012-11-14 18:46:53 +00:00
|
|
|
#define GLOF_LVB 2
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
enum {
|
|
|
|
GFS2_LKS_SRTT = 0, /* Non blocking smoothed round trip time */
|
|
|
|
GFS2_LKS_SRTTVAR = 1, /* Non blocking smoothed variance */
|
|
|
|
GFS2_LKS_SRTTB = 2, /* Blocking smoothed round trip time */
|
|
|
|
GFS2_LKS_SRTTVARB = 3, /* Blocking smoothed variance */
|
|
|
|
GFS2_LKS_SIRT = 4, /* Smoothed Inter-request time */
|
|
|
|
GFS2_LKS_SIRTVAR = 5, /* Smoothed Inter-request variance */
|
|
|
|
GFS2_LKS_DCOUNT = 6, /* Count of dlm requests */
|
|
|
|
GFS2_LKS_QCOUNT = 7, /* Count of gfs2_holder queues */
|
|
|
|
GFS2_NR_LKSTATS
|
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_lkstats {
|
|
|
|
s64 stats[GFS2_NR_LKSTATS];
|
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
enum {
|
|
|
|
/* States */
|
2008-05-21 16:03:22 +00:00
|
|
|
HIF_HOLDER = 6, /* Set for gh that "holds" the glock */
|
2006-01-16 16:50:04 +00:00
|
|
|
HIF_FIRST = 7,
|
2007-01-17 15:33:23 +00:00
|
|
|
HIF_WAIT = 10,
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_holder {
|
|
|
|
struct list_head gh_list;
|
|
|
|
|
|
|
|
struct gfs2_glock *gh_gl;
|
2008-02-07 08:13:19 +00:00
|
|
|
struct pid *gh_owner_pid;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int gh_state;
|
2006-04-18 14:09:15 +00:00
|
|
|
unsigned gh_flags;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
int gh_error;
|
2008-05-21 16:03:22 +00:00
|
|
|
unsigned long gh_iflags; /* HIF_... */
|
2006-03-29 19:36:49 +00:00
|
|
|
unsigned long gh_ip;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2014-09-10 19:22:51 +00:00
|
|
|
/* Number of quota types we support */
|
|
|
|
#define GFS2_MAXQUOTAS 2
|
|
|
|
|
2012-07-19 12:12:40 +00:00
|
|
|
/* Resource group multi-block reservation, in order of appearance:
|
|
|
|
|
|
|
|
Step 1. Function prepares to write, allocates a mb, sets the size hint.
|
|
|
|
Step 2. User calls inplace_reserve to target an rgrp, sets the rgrp info
|
|
|
|
Step 3. Function get_local_rgrp locks the rgrp, determines which bits to use
|
|
|
|
Step 4. Bits are assigned from the rgrp based on either the reservation
|
|
|
|
or wherever it can.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct gfs2_blkreserv {
|
|
|
|
/* components used during write (step 1): */
|
|
|
|
atomic_t rs_sizehint; /* hint of the write size */
|
|
|
|
|
|
|
|
struct gfs2_holder rs_rgd_gh; /* Filled in by get_local_rgrp */
|
|
|
|
struct rb_node rs_node; /* link to other block reservations */
|
2012-08-23 14:37:59 +00:00
|
|
|
struct gfs2_rbm rs_rbm; /* Start of reservation */
|
2012-07-19 12:12:40 +00:00
|
|
|
u32 rs_free; /* how many blocks are still free */
|
2012-08-23 14:37:59 +00:00
|
|
|
u64 rs_inum; /* Inode number for reservation */
|
2012-07-19 12:12:40 +00:00
|
|
|
|
|
|
|
/* ancillary quota stuff */
|
2014-09-10 19:22:51 +00:00
|
|
|
struct gfs2_quota_data *rs_qa_qd[2 * GFS2_MAXQUOTAS];
|
|
|
|
struct gfs2_holder rs_qa_qd_ghs[2 * GFS2_MAXQUOTAS];
|
2012-07-19 12:12:40 +00:00
|
|
|
unsigned int rs_qa_qd_num;
|
|
|
|
};
|
|
|
|
|
2013-10-02 10:13:25 +00:00
|
|
|
/*
|
|
|
|
* Allocation parameters
|
|
|
|
* @target: The number of blocks we'd ideally like to allocate
|
|
|
|
* @aflags: The flags (e.g. Orlov flag)
|
|
|
|
*
|
|
|
|
* The intent is to gradually expand this structure over time in
|
|
|
|
* order to give more information, e.g. alignment, min extent size
|
|
|
|
* to the allocation code.
|
|
|
|
*/
|
|
|
|
struct gfs2_alloc_parms {
|
2015-03-18 17:03:41 +00:00
|
|
|
u64 target;
|
2015-03-18 17:04:37 +00:00
|
|
|
u32 min_target;
|
2013-10-02 10:13:25 +00:00
|
|
|
u32 aflags;
|
2015-03-18 17:04:37 +00:00
|
|
|
u64 allowed;
|
2013-10-02 10:13:25 +00:00
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
enum {
|
2008-05-21 16:03:22 +00:00
|
|
|
GLF_LOCK = 1,
|
|
|
|
GLF_DEMOTE = 3,
|
|
|
|
GLF_PENDING_DEMOTE = 4,
|
|
|
|
GLF_DEMOTE_IN_PROGRESS = 5,
|
|
|
|
GLF_DIRTY = 6,
|
|
|
|
GLF_LFLUSH = 7,
|
|
|
|
GLF_INVALIDATE_IN_PROGRESS = 8,
|
|
|
|
GLF_REPLY_PENDING = 9,
|
2009-01-12 10:43:39 +00:00
|
|
|
GLF_INITIAL = 10,
|
|
|
|
GLF_FROZEN = 11,
|
2010-09-03 08:39:20 +00:00
|
|
|
GLF_QUEUED = 12,
|
2011-04-14 13:09:52 +00:00
|
|
|
GLF_LRU = 13,
|
|
|
|
GLF_OBJECT = 14, /* Used only for tracing */
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
GLF_BLOCKING = 15,
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_glock {
|
2011-01-19 09:30:01 +00:00
|
|
|
struct hlist_bl_node gl_list;
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
struct gfs2_sbd *gl_sbd;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned long gl_flags; /* GLF_... */
|
|
|
|
struct lm_lockname gl_name;
|
|
|
|
|
2013-10-15 14:18:08 +00:00
|
|
|
struct lockref gl_lockref;
|
|
|
|
#define gl_spin gl_lockref.lock
|
2006-01-16 16:50:04 +00:00
|
|
|
|
2010-11-30 15:49:31 +00:00
|
|
|
/* State fields protected by gl_spin */
|
|
|
|
unsigned int gl_state:2, /* Current state */
|
|
|
|
gl_target:2, /* Target state */
|
|
|
|
gl_demote_state:2, /* State requested by remote node */
|
|
|
|
gl_req:2, /* State in last dlm request */
|
|
|
|
gl_reply:8; /* Last reply from the dlm */
|
|
|
|
|
2006-09-08 17:35:56 +00:00
|
|
|
unsigned int gl_hash;
|
2007-03-16 09:40:31 +00:00
|
|
|
unsigned long gl_demote_time; /* time of first demote request */
|
2011-06-15 15:41:48 +00:00
|
|
|
long gl_hold_time;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct list_head gl_holders;
|
|
|
|
|
2006-08-30 13:30:00 +00:00
|
|
|
const struct gfs2_glock_operations *gl_ops;
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
ktime_t gl_dstamp;
|
|
|
|
struct gfs2_lkstats gl_stats;
|
2009-01-12 10:43:39 +00:00
|
|
|
struct dlm_lksb gl_lksb;
|
[GFS2] delay glock demote for a minimum hold time
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in
a cluster, it will deadlock. The reason is that do_no_page() will repeatedly
call gfs2_sharewrite_nopage(), because each node keeps giving up the glock
too early, and is forced to call unmap_mapping_range(). This bumps the
mapping->truncate_count sequence count, forcing do_no_page() to retry. This
patch institutes a minimum glock hold time a tenth a second. This insures
that even in heavy contention cases, the node has enough time to get some
useful work done before it gives up the glock.
A second issue is that when gfs2_glock_dq() is called from within a page fault
to demote a lock, and the associated page needs to be written out, it will
try to acqire a lock on it, but it has already been locked at a higher level.
This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this
issue. This is the same patch as Steve Whitehouse originally proposed to fix
this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock
before it queues up the work on it.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-23 18:19:05 +00:00
|
|
|
unsigned long gl_tchange;
|
2006-01-16 16:50:04 +00:00
|
|
|
void *gl_object;
|
|
|
|
|
2008-11-20 13:39:47 +00:00
|
|
|
struct list_head gl_lru;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct list_head gl_ail_list;
|
|
|
|
atomic_t gl_ail_count;
|
2011-04-14 15:50:31 +00:00
|
|
|
atomic_t gl_revokes;
|
[GFS2] delay glock demote for a minimum hold time
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in
a cluster, it will deadlock. The reason is that do_no_page() will repeatedly
call gfs2_sharewrite_nopage(), because each node keeps giving up the glock
too early, and is forced to call unmap_mapping_range(). This bumps the
mapping->truncate_count sequence count, forcing do_no_page() to retry. This
patch institutes a minimum glock hold time a tenth a second. This insures
that even in heavy contention cases, the node has enough time to get some
useful work done before it gives up the glock.
A second issue is that when gfs2_glock_dq() is called from within a page fault
to demote a lock, and the associated page needs to be written out, it will
try to acqire a lock on it, but it has already been locked at a higher level.
This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this
issue. This is the same patch as Steve Whitehouse originally proposed to fix
this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock
before it queues up the work on it.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-23 18:19:05 +00:00
|
|
|
struct delayed_work gl_work;
|
2013-12-06 10:16:14 +00:00
|
|
|
union {
|
|
|
|
/* For inode and iopen glocks only */
|
|
|
|
struct work_struct gl_delete;
|
|
|
|
/* For rgrp glocks only */
|
|
|
|
struct {
|
|
|
|
loff_t start;
|
|
|
|
loff_t end;
|
|
|
|
} gl_vm;
|
|
|
|
};
|
2011-01-19 09:30:01 +00:00
|
|
|
struct rcu_head gl_rcu;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2008-01-30 15:34:04 +00:00
|
|
|
#define GFS2_MIN_LVB_SIZE 32 /* Min size of LVB that gfs2 supports */
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
enum {
|
2006-11-01 21:05:38 +00:00
|
|
|
GIF_INVALID = 0,
|
2006-01-16 16:50:04 +00:00
|
|
|
GIF_QD_LOCKED = 1,
|
2011-08-02 12:17:27 +00:00
|
|
|
GIF_ALLOC_FAILED = 2,
|
2006-01-16 16:50:04 +00:00
|
|
|
GIF_SW_PAGED = 3,
|
2013-01-28 09:30:07 +00:00
|
|
|
GIF_ORDERED = 4,
|
2014-03-31 15:33:17 +00:00
|
|
|
GIF_FREE_VFS_INODE = 5,
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_inode {
|
2006-05-18 20:25:27 +00:00
|
|
|
struct inode i_inode;
|
2007-05-15 14:37:50 +00:00
|
|
|
u64 i_no_addr;
|
|
|
|
u64 i_no_formal_ino;
|
2008-11-03 13:39:46 +00:00
|
|
|
u64 i_generation;
|
2008-11-03 14:28:42 +00:00
|
|
|
u64 i_eattr;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned long i_flags; /* GIF_... */
|
2006-06-14 19:32:57 +00:00
|
|
|
struct gfs2_glock *i_gl; /* Move into i_gh? */
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_holder i_iopen_gh;
|
2006-01-30 18:34:10 +00:00
|
|
|
struct gfs2_holder i_gh; /* for prepare/commit_write only */
|
2012-07-19 12:12:40 +00:00
|
|
|
struct gfs2_blkreserv *i_res; /* rgrp multi-block reservation */
|
2011-09-01 12:31:59 +00:00
|
|
|
struct gfs2_rgrpd *i_rgd;
|
2008-02-06 09:25:45 +00:00
|
|
|
u64 i_goal; /* goal block for allocations */
|
2006-01-16 16:50:04 +00:00
|
|
|
struct rw_semaphore i_rw_mutex;
|
2013-01-28 09:30:07 +00:00
|
|
|
struct list_head i_ordered;
|
2008-11-18 13:38:48 +00:00
|
|
|
struct list_head i_trunc_list;
|
2011-06-15 09:29:37 +00:00
|
|
|
__be64 *i_hash_cache;
|
2008-11-03 13:59:19 +00:00
|
|
|
u32 i_entries;
|
2008-11-04 10:05:22 +00:00
|
|
|
u32 i_diskflags;
|
2008-01-28 10:37:35 +00:00
|
|
|
u8 i_height;
|
2008-02-01 09:23:44 +00:00
|
|
|
u8 i_depth;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2006-06-14 19:32:57 +00:00
|
|
|
/*
|
|
|
|
* Since i_inode is the first element of struct gfs2_inode,
|
|
|
|
* this is effectively a cast.
|
|
|
|
*/
|
2006-05-18 20:25:27 +00:00
|
|
|
static inline struct gfs2_inode *GFS2_I(struct inode *inode)
|
|
|
|
{
|
|
|
|
return container_of(inode, struct gfs2_inode, i_inode);
|
|
|
|
}
|
|
|
|
|
2007-10-17 07:35:19 +00:00
|
|
|
static inline struct gfs2_sbd *GFS2_SB(const struct inode *inode)
|
2006-06-14 19:32:57 +00:00
|
|
|
{
|
|
|
|
return inode->i_sb->s_fs_info;
|
|
|
|
}
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_file {
|
2006-02-21 12:51:39 +00:00
|
|
|
struct mutex f_fl_mutex;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_holder f_fl_gh;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_revoke_replay {
|
|
|
|
struct list_head rr_list;
|
2006-09-04 16:49:07 +00:00
|
|
|
u64 rr_blkno;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int rr_where;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
QDF_CHANGE = 1,
|
|
|
|
QDF_LOCKED = 2,
|
2011-03-08 15:40:42 +00:00
|
|
|
QDF_REFRESH = 3,
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_quota_data {
|
2013-12-12 10:47:59 +00:00
|
|
|
struct hlist_bl_node qd_hlist;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct list_head qd_list;
|
2013-11-04 10:15:08 +00:00
|
|
|
struct kqid qd_id;
|
2013-12-12 10:47:59 +00:00
|
|
|
struct gfs2_sbd *qd_sbd;
|
2013-11-01 18:52:06 +00:00
|
|
|
struct lockref qd_lockref;
|
2013-11-04 10:15:08 +00:00
|
|
|
struct list_head qd_lru;
|
2013-12-12 10:47:59 +00:00
|
|
|
unsigned qd_hash;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
unsigned long qd_flags; /* QDF_... */
|
|
|
|
|
2006-09-04 16:49:07 +00:00
|
|
|
s64 qd_change;
|
|
|
|
s64 qd_change_sync;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
unsigned int qd_slot;
|
|
|
|
unsigned int qd_slot_count;
|
|
|
|
|
|
|
|
struct buffer_head *qd_bh;
|
|
|
|
struct gfs2_quota_change *qd_bh_qc;
|
|
|
|
unsigned int qd_bh_count;
|
|
|
|
|
|
|
|
struct gfs2_glock *qd_gl;
|
|
|
|
struct gfs2_quota_lvb qd_qb;
|
|
|
|
|
2006-09-04 16:49:07 +00:00
|
|
|
u64 qd_sync_gen;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned long qd_last_warn;
|
2013-12-12 10:47:59 +00:00
|
|
|
struct rcu_head qd_rcu;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_trans {
|
2006-03-29 19:36:49 +00:00
|
|
|
unsigned long tr_ip;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
unsigned int tr_blocks;
|
|
|
|
unsigned int tr_revokes;
|
|
|
|
unsigned int tr_reserved;
|
2014-02-21 11:52:00 +00:00
|
|
|
unsigned int tr_touched:1;
|
|
|
|
unsigned int tr_attached:1;
|
GFS2: remove transaction glock
GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.
This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.
When a node wants to freeze the filesystem, it grabs this glock
exclusively. When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush. gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again. Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.
However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.
In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem. The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.
The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 03:26:55 +00:00
|
|
|
unsigned int tr_alloced:1;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
unsigned int tr_num_buf_new;
|
[GFS2] assertion failure after writing to journaled file, umount
This patch passes all my nasty tests that were causing the code to
fail under one circumstance or another. Here is a complete summary
of all changes from today's git tree, in order of appearance:
1. There are now separate variables for metadata buffer accounting.
2. Variable sd_log_num_hdrs is no longer needed, since the header
accounting is taken care of by the reserve/refund sequence.
3. Fixed a tiny grammatical problem in a comment.
4. Added a new function "calc_reserved" to calculate the reserved
log space. This isn't entirely necessary, but it has two benefits:
First, it simplifies the gfs2_log_refund function greatly.
Second, it allows for easier debugging because I could sprinkle the
code with calls to this function to make sure the accounting is
proper (by adding asserts and printks) at strategic point of the code.
5. In log_pull_tail there apparently was a kludge to fix up the
accounting based on a "pull" parameter. The buffer accounting is
now done properly, so the kludge was removed.
6. File sync operations were making a call to gfs2_log_flush that
writes another journal header. Since that header was unplanned
for (reserved) by the reserve/refund sequence, the free space had
to be decremented so that when log_pull_tail gets called, the free
space is be adjusted properly. (Did I hear you call that a kludge?
well, maybe, but a lot more justifiable than the one I removed).
7. In the gfs2_log_shutdown code, it optionally syncs the log by
specifying the PULL parameter to log_write_header. I'm not sure
this is necessary anymore. It just seems to me there could be
cases where shutdown is called while there are outstanding log
buffers.
8. In the (data)buf_lo_before_commit functions, I changed some offset
values from being calculated on the fly to being constants. That
simplified some code and we might as well let the compiler do the
calculation once rather than redoing those cycles at run time.
9. This version has my rewritten databuf_lo_add function.
This version is much more like its predecessor, buf_lo_add, which
makes it easier to understand. Again, this might not be necessary,
but it seems as if this one works as well as the previous one,
maybe even better, so I decided to leave it in.
10. In databuf_lo_before_commit, a previous data corruption problem
was caused by going off the end of the buffer. The proper solution
is to have the proper limit in place, rather than stopping earlier.
(Thus my previous attempt to fix it is wrong).
If you don't wrap the buffer, you're stopping too early and that
causes more log buffer accounting problems.
11. In lops.h there are two new (previously mentioned) constants for
figuring out the data offset for the journal buffers.
12. There are also two new functions, buf_limit and databuf_limit to
calculate how many entries will fit in the buffer.
13. In function gfs2_meta_wipe, it needs to distinguish between pinned
metadata buffers and journaled data buffers for proper journal buffer
accounting. It can't use the JDATA gfs2_inode flag because it's
sometimes passed the "real" inode and sometimes the "metadata
inode" and the inode flags will be random bits in a metadata
gfs2_inode. It needs to base its decision on which was passed in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 19:50:20 +00:00
|
|
|
unsigned int tr_num_databuf_new;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int tr_num_buf_rm;
|
[GFS2] assertion failure after writing to journaled file, umount
This patch passes all my nasty tests that were causing the code to
fail under one circumstance or another. Here is a complete summary
of all changes from today's git tree, in order of appearance:
1. There are now separate variables for metadata buffer accounting.
2. Variable sd_log_num_hdrs is no longer needed, since the header
accounting is taken care of by the reserve/refund sequence.
3. Fixed a tiny grammatical problem in a comment.
4. Added a new function "calc_reserved" to calculate the reserved
log space. This isn't entirely necessary, but it has two benefits:
First, it simplifies the gfs2_log_refund function greatly.
Second, it allows for easier debugging because I could sprinkle the
code with calls to this function to make sure the accounting is
proper (by adding asserts and printks) at strategic point of the code.
5. In log_pull_tail there apparently was a kludge to fix up the
accounting based on a "pull" parameter. The buffer accounting is
now done properly, so the kludge was removed.
6. File sync operations were making a call to gfs2_log_flush that
writes another journal header. Since that header was unplanned
for (reserved) by the reserve/refund sequence, the free space had
to be decremented so that when log_pull_tail gets called, the free
space is be adjusted properly. (Did I hear you call that a kludge?
well, maybe, but a lot more justifiable than the one I removed).
7. In the gfs2_log_shutdown code, it optionally syncs the log by
specifying the PULL parameter to log_write_header. I'm not sure
this is necessary anymore. It just seems to me there could be
cases where shutdown is called while there are outstanding log
buffers.
8. In the (data)buf_lo_before_commit functions, I changed some offset
values from being calculated on the fly to being constants. That
simplified some code and we might as well let the compiler do the
calculation once rather than redoing those cycles at run time.
9. This version has my rewritten databuf_lo_add function.
This version is much more like its predecessor, buf_lo_add, which
makes it easier to understand. Again, this might not be necessary,
but it seems as if this one works as well as the previous one,
maybe even better, so I decided to leave it in.
10. In databuf_lo_before_commit, a previous data corruption problem
was caused by going off the end of the buffer. The proper solution
is to have the proper limit in place, rather than stopping earlier.
(Thus my previous attempt to fix it is wrong).
If you don't wrap the buffer, you're stopping too early and that
causes more log buffer accounting problems.
11. In lops.h there are two new (previously mentioned) constants for
figuring out the data offset for the journal buffers.
12. There are also two new functions, buf_limit and databuf_limit to
calculate how many entries will fit in the buffer.
13. In function gfs2_meta_wipe, it needs to distinguish between pinned
metadata buffers and journaled data buffers for proper journal buffer
accounting. It can't use the JDATA gfs2_inode flag because it's
sometimes passed the "real" inode and sometimes the "metadata
inode" and the inode flags will be random bits in a metadata
gfs2_inode. It needs to base its decision on which was passed in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 19:50:20 +00:00
|
|
|
unsigned int tr_num_databuf_rm;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int tr_num_revoke;
|
|
|
|
unsigned int tr_num_revoke_rm;
|
|
|
|
|
GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-06 01:31:46 +00:00
|
|
|
struct list_head tr_list;
|
2014-02-21 15:22:35 +00:00
|
|
|
struct list_head tr_databuf;
|
|
|
|
struct list_head tr_buf;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-06 01:31:46 +00:00
|
|
|
unsigned int tr_first;
|
|
|
|
struct list_head tr_ail1_list;
|
|
|
|
struct list_head tr_ail2_list;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2007-12-12 00:49:21 +00:00
|
|
|
struct gfs2_journal_extent {
|
2014-03-03 13:35:57 +00:00
|
|
|
struct list_head list;
|
2007-12-12 00:49:21 +00:00
|
|
|
|
|
|
|
unsigned int lblock; /* First logical block */
|
|
|
|
u64 dblock; /* First disk block */
|
|
|
|
u64 blocks;
|
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_jdesc {
|
|
|
|
struct list_head jd_list;
|
2007-12-12 00:49:21 +00:00
|
|
|
struct list_head extent_list;
|
2014-03-03 13:35:57 +00:00
|
|
|
unsigned int nr_extents;
|
2010-07-20 20:09:02 +00:00
|
|
|
struct work_struct jd_work;
|
2006-02-13 12:27:43 +00:00
|
|
|
struct inode *jd_inode;
|
2009-05-19 09:01:18 +00:00
|
|
|
unsigned long jd_flags;
|
|
|
|
#define JDF_RECOVERY 1
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int jd_jid;
|
|
|
|
unsigned int jd_blocks;
|
2012-01-09 20:29:20 +00:00
|
|
|
int jd_recover_error;
|
2014-03-06 22:19:15 +00:00
|
|
|
/* Replay stuff */
|
|
|
|
|
|
|
|
unsigned int jd_found_blocks;
|
|
|
|
unsigned int jd_found_revokes;
|
|
|
|
unsigned int jd_replayed_blocks;
|
|
|
|
|
|
|
|
struct list_head jd_revoke_list;
|
|
|
|
unsigned int jd_replay_tail;
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2007-06-01 13:11:58 +00:00
|
|
|
struct gfs2_statfs_change_host {
|
|
|
|
s64 sc_total;
|
|
|
|
s64 sc_free;
|
|
|
|
s64 sc_dinodes;
|
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
#define GFS2_QUOTA_DEFAULT GFS2_QUOTA_OFF
|
|
|
|
#define GFS2_QUOTA_OFF 0
|
|
|
|
#define GFS2_QUOTA_ACCOUNT 1
|
|
|
|
#define GFS2_QUOTA_ON 2
|
|
|
|
|
|
|
|
#define GFS2_DATA_DEFAULT GFS2_DATA_ORDERED
|
|
|
|
#define GFS2_DATA_WRITEBACK 1
|
|
|
|
#define GFS2_DATA_ORDERED 2
|
|
|
|
|
2009-08-24 09:44:18 +00:00
|
|
|
#define GFS2_ERRORS_DEFAULT GFS2_ERRORS_WITHDRAW
|
|
|
|
#define GFS2_ERRORS_WITHDRAW 0
|
|
|
|
#define GFS2_ERRORS_CONTINUE 1 /* place holder for future feature */
|
|
|
|
#define GFS2_ERRORS_RO 2 /* place holder for future feature */
|
|
|
|
#define GFS2_ERRORS_PANIC 3
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_args {
|
2008-09-18 12:49:32 +00:00
|
|
|
char ar_lockproto[GFS2_LOCKNAME_LEN]; /* Name of the Lock Protocol */
|
|
|
|
char ar_locktable[GFS2_LOCKNAME_LEN]; /* Name of the Lock Table */
|
|
|
|
char ar_hostdata[GFS2_LOCKNAME_LEN]; /* Host specific data */
|
|
|
|
unsigned int ar_spectator:1; /* Don't get a journal */
|
|
|
|
unsigned int ar_localflocks:1; /* Let the VFS do flock|fcntl */
|
|
|
|
unsigned int ar_debug:1; /* Oops on errors */
|
|
|
|
unsigned int ar_posix_acl:1; /* Enable posix acls */
|
|
|
|
unsigned int ar_quota:2; /* off/account/on */
|
|
|
|
unsigned int ar_suiddir:1; /* suiddir support */
|
|
|
|
unsigned int ar_data:2; /* ordered/writeback */
|
|
|
|
unsigned int ar_meta:1; /* mount metafs */
|
2009-02-09 09:25:01 +00:00
|
|
|
unsigned int ar_discard:1; /* discard requests */
|
2009-08-24 09:44:18 +00:00
|
|
|
unsigned int ar_errors:2; /* errors=withdraw | panic */
|
2009-10-30 07:03:27 +00:00
|
|
|
unsigned int ar_nobarrier:1; /* do not send barriers */
|
GFS2: Use lvbs for storing rgrp information with mount option
Instead of reading in the resource groups when gfs2 is checking
for free space to allocate from, gfs2 can store the necessary infromation
in the resource group's lvb. Also, instead of searching for unlinked
inodes in every resource group that's checked for free space, gfs2 can
store the number of unlinked but inodes in the lvb, and only check for
unlinked inodes if it will find some.
The first time a resource group is locked, the lvb must initialized.
Since this involves counting the unlinked inodes in the resource group,
this takes a little extra time. But after that, if the resource group
is locked with GL_SKIP, the buffer head won't be read in unless it's
actually needed.
Enabling the resource groups lvbs is done via the rgrplvb mount option. If
this option isn't set, the lvbs will still be set and updated, but they won't
be verfied or used by the filesystem. To safely turn on this option, all of
the nodes mounting the filesystem must be running code with this patch, and
the filesystem must have been completely unmounted since they were updated.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-05-30 04:01:09 +00:00
|
|
|
unsigned int ar_rgrplvb:1; /* use lvbs for rgrp info */
|
2009-05-13 13:49:48 +00:00
|
|
|
int ar_commit; /* Commit interval */
|
2009-10-20 07:39:44 +00:00
|
|
|
int ar_statfs_quantum; /* The fast statfs interval */
|
|
|
|
int ar_quota_quantum; /* The quota interval */
|
|
|
|
int ar_statfs_percent; /* The % change to force sync */
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_tune {
|
|
|
|
spinlock_t gt_spin;
|
|
|
|
|
|
|
|
unsigned int gt_logd_secs;
|
|
|
|
|
|
|
|
unsigned int gt_quota_warn_period; /* Secs between quota warn msgs */
|
|
|
|
unsigned int gt_quota_scale_num; /* Numerator */
|
|
|
|
unsigned int gt_quota_scale_den; /* Denominator */
|
|
|
|
unsigned int gt_quota_quantum; /* Secs between syncs to quota file */
|
|
|
|
unsigned int gt_new_files_jdata;
|
|
|
|
unsigned int gt_max_readahead; /* Max bytes to read-ahead from disk */
|
|
|
|
unsigned int gt_complain_secs;
|
|
|
|
unsigned int gt_statfs_quantum;
|
|
|
|
unsigned int gt_statfs_slow;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
SDF_JOURNAL_CHECKED = 0,
|
|
|
|
SDF_JOURNAL_LIVE = 1,
|
|
|
|
SDF_SHUTDOWN = 2,
|
2008-09-26 09:23:22 +00:00
|
|
|
SDF_NOBARRIERS = 3,
|
2009-05-19 09:01:18 +00:00
|
|
|
SDF_NORECOVERY = 4,
|
2010-05-06 10:03:29 +00:00
|
|
|
SDF_DEMOTE = 5,
|
2010-06-14 09:01:30 +00:00
|
|
|
SDF_NOJOURNALID = 6,
|
2012-01-09 19:40:06 +00:00
|
|
|
SDF_RORECOVERY = 7, /* read only recovery */
|
2012-11-13 15:58:56 +00:00
|
|
|
SDF_SKIP_DLM_UNLOCK = 8,
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
2014-11-14 02:42:04 +00:00
|
|
|
enum gfs2_freeze_state {
|
|
|
|
SFS_UNFROZEN = 0,
|
|
|
|
SFS_STARTING_FREEZE = 1,
|
|
|
|
SFS_FROZEN = 2,
|
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
#define GFS2_FSNAME_LEN 256
|
|
|
|
|
2007-06-01 13:11:58 +00:00
|
|
|
struct gfs2_inum_host {
|
|
|
|
u64 no_formal_ino;
|
|
|
|
u64 no_addr;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct gfs2_sb_host {
|
|
|
|
u32 sb_magic;
|
|
|
|
u32 sb_type;
|
|
|
|
u32 sb_format;
|
|
|
|
|
|
|
|
u32 sb_fs_format;
|
|
|
|
u32 sb_multihost_format;
|
|
|
|
u32 sb_bsize;
|
|
|
|
u32 sb_bsize_shift;
|
|
|
|
|
|
|
|
struct gfs2_inum_host sb_master_dir;
|
|
|
|
struct gfs2_inum_host sb_root_dir;
|
|
|
|
|
|
|
|
char sb_lockproto[GFS2_LOCKNAME_LEN];
|
|
|
|
char sb_locktable[GFS2_LOCKNAME_LEN];
|
|
|
|
};
|
|
|
|
|
2009-01-12 10:43:39 +00:00
|
|
|
/*
|
|
|
|
* lm_mount() return values
|
|
|
|
*
|
|
|
|
* ls_jid - the journal ID this node should use
|
|
|
|
* ls_first - this node is the first to mount the file system
|
|
|
|
* ls_lockspace - lock module's context for this file system
|
|
|
|
* ls_ops - lock module's functions
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct lm_lockstruct {
|
2010-09-29 14:04:18 +00:00
|
|
|
int ls_jid;
|
2009-01-12 10:43:39 +00:00
|
|
|
unsigned int ls_first;
|
|
|
|
const struct lm_lockops *ls_ops;
|
|
|
|
dlm_lockspace_t *ls_dlm;
|
|
|
|
|
2012-01-09 22:18:05 +00:00
|
|
|
int ls_recover_jid_done; /* These two are deprecated, */
|
|
|
|
int ls_recover_jid_status; /* used previously by gfs_controld */
|
|
|
|
|
|
|
|
struct dlm_lksb ls_mounted_lksb; /* mounted_lock */
|
|
|
|
struct dlm_lksb ls_control_lksb; /* control_lock */
|
|
|
|
char ls_control_lvb[GDLM_LVB_SIZE]; /* control_lock lvb */
|
|
|
|
struct completion ls_sync_wait; /* {control,mounted}_{lock,unlock} */
|
2013-03-05 21:01:47 +00:00
|
|
|
char *ls_lvb_bits;
|
2012-01-09 22:18:05 +00:00
|
|
|
|
|
|
|
spinlock_t ls_recover_spin; /* protects following fields */
|
|
|
|
unsigned long ls_recover_flags; /* DFL_ */
|
|
|
|
uint32_t ls_recover_mount; /* gen in first recover_done cb */
|
|
|
|
uint32_t ls_recover_start; /* gen in last recover_done cb */
|
|
|
|
uint32_t ls_recover_block; /* copy recover_start in last recover_prep */
|
|
|
|
uint32_t ls_recover_size; /* size of recover_submit, recover_result */
|
|
|
|
uint32_t *ls_recover_submit; /* gen in last recover_slot cb per jid */
|
|
|
|
uint32_t *ls_recover_result; /* result of last jid recovery */
|
2009-01-12 10:43:39 +00:00
|
|
|
};
|
|
|
|
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
struct gfs2_pcpu_lkstats {
|
|
|
|
/* One struct for each glock type */
|
|
|
|
struct gfs2_lkstats lkstats[10];
|
|
|
|
};
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct gfs2_sbd {
|
|
|
|
struct super_block *sd_vfs;
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
struct gfs2_pcpu_lkstats __percpu *sd_lkstats;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct kobject sd_kobj;
|
|
|
|
unsigned long sd_flags; /* SDF_... */
|
2006-10-14 00:45:02 +00:00
|
|
|
struct gfs2_sb_host sd_sb;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
/* Constants computed on mount */
|
|
|
|
|
2006-09-04 16:49:07 +00:00
|
|
|
u32 sd_fsb2bb;
|
|
|
|
u32 sd_fsb2bb_shift;
|
|
|
|
u32 sd_diptrs; /* Number of pointers in a dinode */
|
|
|
|
u32 sd_inptrs; /* Number of pointers in a indirect block */
|
|
|
|
u32 sd_jbsize; /* Size of a journaled data block */
|
|
|
|
u32 sd_hash_bsize; /* sizeof(exhash block) */
|
|
|
|
u32 sd_hash_bsize_shift;
|
|
|
|
u32 sd_hash_ptrs; /* Number of pointers in a hash block */
|
|
|
|
u32 sd_qc_per_block;
|
2012-10-19 12:32:51 +00:00
|
|
|
u32 sd_blocks_per_bitmap;
|
2006-09-04 16:49:07 +00:00
|
|
|
u32 sd_max_dirres; /* Max blocks needed to add a directory entry */
|
|
|
|
u32 sd_max_height; /* Max height of a file's metadata tree */
|
2008-01-28 10:37:35 +00:00
|
|
|
u64 sd_heightsize[GFS2_MAX_META_HEIGHT + 1];
|
2006-09-04 16:49:07 +00:00
|
|
|
u32 sd_max_jheight; /* Max height of journaled file's meta tree */
|
2008-01-28 10:37:35 +00:00
|
|
|
u64 sd_jheightsize[GFS2_MAX_META_HEIGHT + 1];
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
struct gfs2_args sd_args; /* Mount arguments */
|
|
|
|
struct gfs2_tune sd_tune; /* Filesystem tuning structure */
|
|
|
|
|
|
|
|
/* Lock Stuff */
|
|
|
|
|
|
|
|
struct lm_lockstruct sd_lockstruct;
|
|
|
|
struct gfs2_holder sd_live_gh;
|
|
|
|
struct gfs2_glock *sd_rename_gl;
|
GFS2: remove transaction glock
GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.
This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.
When a node wants to freeze the filesystem, it grabs this glock
exclusively. When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush. gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again. Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.
However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.
In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem. The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.
The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 03:26:55 +00:00
|
|
|
struct gfs2_glock *sd_freeze_gl;
|
2014-11-14 02:42:04 +00:00
|
|
|
struct work_struct sd_freeze_work;
|
2010-01-25 11:20:19 +00:00
|
|
|
wait_queue_head_t sd_glock_wait;
|
|
|
|
atomic_t sd_glock_disposal;
|
2011-07-11 07:53:30 +00:00
|
|
|
struct completion sd_locking_init;
|
2013-02-13 12:21:40 +00:00
|
|
|
struct completion sd_wdack;
|
2012-01-09 22:18:05 +00:00
|
|
|
struct delayed_work sd_control_work;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
/* Inode Stuff */
|
|
|
|
|
2008-08-08 12:45:13 +00:00
|
|
|
struct dentry *sd_master_dir;
|
|
|
|
struct dentry *sd_root_dir;
|
|
|
|
|
2006-01-30 18:34:10 +00:00
|
|
|
struct inode *sd_jindex;
|
|
|
|
struct inode *sd_statfs_inode;
|
|
|
|
struct inode *sd_sc_inode;
|
|
|
|
struct inode *sd_qc_inode;
|
|
|
|
struct inode *sd_rindex;
|
|
|
|
struct inode *sd_quota_inode;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
/* StatFS stuff */
|
|
|
|
|
|
|
|
spinlock_t sd_statfs_spin;
|
2006-10-14 03:43:19 +00:00
|
|
|
struct gfs2_statfs_change_host sd_statfs_master;
|
|
|
|
struct gfs2_statfs_change_host sd_statfs_local;
|
2009-10-20 07:39:44 +00:00
|
|
|
int sd_statfs_force_sync;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
/* Resource group stuff */
|
|
|
|
|
2008-01-31 16:31:39 +00:00
|
|
|
int sd_rindex_uptodate;
|
2006-01-16 16:50:04 +00:00
|
|
|
spinlock_t sd_rindex_spin;
|
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.
Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.
Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.
However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.
The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.
This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.
The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.
In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
|
|
|
struct rb_root sd_rindex_tree;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int sd_rgrps;
|
2010-08-20 05:21:02 +00:00
|
|
|
unsigned int sd_max_rg_data;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
/* Journal index stuff */
|
|
|
|
|
|
|
|
struct list_head sd_jindex_list;
|
|
|
|
spinlock_t sd_jindex_spin;
|
2006-02-21 12:51:39 +00:00
|
|
|
struct mutex sd_jindex_mutex;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int sd_journals;
|
|
|
|
|
|
|
|
struct gfs2_jdesc *sd_jdesc;
|
|
|
|
struct gfs2_holder sd_journal_gh;
|
|
|
|
struct gfs2_holder sd_jinode_gh;
|
|
|
|
|
|
|
|
struct gfs2_holder sd_sc_gh;
|
|
|
|
struct gfs2_holder sd_qc_gh;
|
|
|
|
|
2014-06-02 13:40:25 +00:00
|
|
|
struct completion sd_journal_ready;
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
/* Daemon stuff */
|
|
|
|
|
|
|
|
struct task_struct *sd_logd_process;
|
|
|
|
struct task_struct *sd_quotad_process;
|
|
|
|
|
|
|
|
/* Quota stuff */
|
|
|
|
|
|
|
|
struct list_head sd_quota_list;
|
|
|
|
atomic_t sd_quota_count;
|
2006-02-21 12:51:39 +00:00
|
|
|
struct mutex sd_quota_mutex;
|
2013-10-04 11:29:34 +00:00
|
|
|
struct mutex sd_quota_sync_mutex;
|
2008-11-17 14:25:37 +00:00
|
|
|
wait_queue_head_t sd_quota_wait;
|
2008-11-18 13:38:48 +00:00
|
|
|
struct list_head sd_trunc_list;
|
|
|
|
spinlock_t sd_trunc_lock;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
unsigned int sd_quota_slots;
|
2013-12-12 17:29:32 +00:00
|
|
|
unsigned long *sd_quota_bitmap;
|
2013-12-13 11:46:28 +00:00
|
|
|
spinlock_t sd_bitmap_lock;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
2006-09-04 16:49:07 +00:00
|
|
|
u64 sd_quota_sync_gen;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
/* Log stuff */
|
|
|
|
|
2013-12-06 16:19:54 +00:00
|
|
|
struct address_space sd_aspace;
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
spinlock_t sd_log_lock;
|
|
|
|
|
GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-06 01:31:46 +00:00
|
|
|
struct gfs2_trans *sd_log_tr;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int sd_log_blks_reserved;
|
2010-03-11 00:10:19 +00:00
|
|
|
int sd_log_commited_revoke;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
GFS2: Various gfs2_logd improvements
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 19:29:16 +00:00
|
|
|
atomic_t sd_log_pinned;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int sd_log_num_revoke;
|
2006-01-30 18:34:10 +00:00
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
struct list_head sd_log_le_revoke;
|
2007-09-02 09:48:13 +00:00
|
|
|
struct list_head sd_log_le_ordered;
|
2013-01-28 09:30:07 +00:00
|
|
|
spinlock_t sd_ordered_lock;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
GFS2: Various gfs2_logd improvements
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 19:29:16 +00:00
|
|
|
atomic_t sd_log_thresh1;
|
|
|
|
atomic_t sd_log_thresh2;
|
2007-11-08 14:55:03 +00:00
|
|
|
atomic_t sd_log_blks_free;
|
GFS2: Various gfs2_logd improvements
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-04 19:29:16 +00:00
|
|
|
wait_queue_head_t sd_log_waitq;
|
|
|
|
wait_queue_head_t sd_logd_waitq;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
2006-09-04 16:49:07 +00:00
|
|
|
u64 sd_log_sequence;
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int sd_log_head;
|
|
|
|
unsigned int sd_log_tail;
|
|
|
|
int sd_log_idle;
|
|
|
|
|
2006-03-29 14:12:12 +00:00
|
|
|
struct rw_semaphore sd_log_flush_lock;
|
2007-09-17 09:59:52 +00:00
|
|
|
atomic_t sd_log_in_flight;
|
2012-04-16 08:28:31 +00:00
|
|
|
struct bio *sd_log_bio;
|
2007-09-17 09:59:52 +00:00
|
|
|
wait_queue_head_t sd_log_flush_wait;
|
2012-04-16 08:28:31 +00:00
|
|
|
int sd_log_error;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
2014-11-14 02:42:04 +00:00
|
|
|
atomic_t sd_reserving_log;
|
|
|
|
wait_queue_head_t sd_reserving_log_wait;
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
unsigned int sd_log_flush_head;
|
2006-09-04 16:49:07 +00:00
|
|
|
u64 sd_log_flush_wrapped;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
2011-03-11 11:52:25 +00:00
|
|
|
spinlock_t sd_ail_lock;
|
2006-01-16 16:50:04 +00:00
|
|
|
struct list_head sd_ail1_list;
|
|
|
|
struct list_head sd_ail2_list;
|
|
|
|
|
|
|
|
/* For quiescing the filesystem */
|
|
|
|
struct gfs2_holder sd_freeze_gh;
|
2014-11-14 02:42:04 +00:00
|
|
|
atomic_t sd_freeze_state;
|
|
|
|
struct mutex sd_freeze_mutex;
|
2006-01-16 16:50:04 +00:00
|
|
|
|
|
|
|
char sd_fsname[GFS2_FSNAME_LEN];
|
|
|
|
char sd_table_name[GFS2_FSNAME_LEN];
|
|
|
|
char sd_proto_name[GFS2_FSNAME_LEN];
|
|
|
|
|
|
|
|
/* Debugging crud */
|
|
|
|
|
|
|
|
unsigned long sd_last_warning;
|
2007-04-18 16:41:11 +00:00
|
|
|
struct dentry *debugfs_dir; /* debugfs directory */
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
struct dentry *debugfs_dentry_glocks;
|
|
|
|
struct dentry *debugfs_dentry_glstats;
|
|
|
|
struct dentry *debugfs_dentry_sbstats;
|
2006-01-16 16:50:04 +00:00
|
|
|
};
|
|
|
|
|
GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.
In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.
The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.
The three pairs of mean/variance measure the following
things:
1. DLM lock time (non-blocking requests)
2. DLM lock time (blocking requests)
3. Inter-request time (again to the DLM)
A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.
There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.
So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:
1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.
Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.
The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 10:38:36 +00:00
|
|
|
static inline void gfs2_glstats_inc(struct gfs2_glock *gl, int which)
|
|
|
|
{
|
|
|
|
gl->gl_stats.stats[which]++;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void gfs2_sbstats_inc(const struct gfs2_glock *gl, int which)
|
|
|
|
{
|
|
|
|
const struct gfs2_sbd *sdp = gl->gl_sbd;
|
|
|
|
preempt_disable();
|
|
|
|
this_cpu_ptr(sdp->sd_lkstats)->lkstats[gl->gl_name.ln_type].stats[which]++;
|
|
|
|
preempt_enable();
|
|
|
|
}
|
|
|
|
|
2006-01-16 16:50:04 +00:00
|
|
|
#endif /* __INCORE_DOT_H__ */
|
|
|
|
|