davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
1d57896638
kernel-ark/arch/arm/configs/u8500_defconfig

131 lines
2.9 KiB
Plaintext
Raw Normal View History

ARM: ux500: Enable HIGHMEM in the u8500 defconfig In order to utilise all of the memory located on ux500 based devices we have to enable HIGHMEM. Without it the kernel truncates memory down to what's left after the PAGE_OFFSET has been applied, which doesn't leave an awful lot, especially if we're running large rootfs' such as full Linux desktop distributions or Android. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-31 15:09:06 +00:00
CONFIG_HIGHMEM=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 06:51:25 +00:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-16 19:30:35 +00:00
CONFIG_MACH_HREFV60=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
CONFIG_MACH_SNOWBALL=y
ARM: ux500: CONFIG: Enable Device Tree support for future endeavours Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-02 21:51:38 +00:00
CONFIG_MACH_UX500_DT=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 06:51:25 +00:00
CONFIG_CPU_IDLE=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_VFP=y
CONFIG_NEON=y
ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-16 19:30:35 +00:00
CONFIG_PM_RUNTIME=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_NET=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NETFILTER=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_PHONET=y
# CONFIG_WIRELESS is not set
CONFIG_CAIF=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_SENSORS_BH1780=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-16 19:30:35 +00:00
CONFIG_SMSC_PHY=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
# CONFIG_WLAN is not set
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_NOMADIK=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_TC3589X=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
# CONFIG_INPUT_MOUSE is not set
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
# CONFIG_LEGACY_PTYS is not set
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_HW_RANDOM=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_SPI=y
CONFIG_SPI_PL022=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, also adds the platform data to support the old fashion. Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 10:56:43 +00:00
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
ARM: ux500: select WATCHDOG and MUSB for ux500 Enable ux500 specific USB and watchdog drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-21 12:31:53 +00:00
CONFIG_WATCHDOG=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
ARM: ux500: CONFIG: Enable GPIO Regulators It is the intention to convert the MMC voltage changing from GPIO flipping to using a proper GPIO regulator interface. A prerequisite of that is to enable the GPIO regulator functionality. As this affects all ux5x0 based boards we'll do it here instead of in the Kconfigs. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 11:01:41 +00:00
CONFIG_REGULATOR_GPIO=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 06:51:25 +00:00
CONFIG_REGULATOR_AB8500=y
ARM: ux500: select SND_SOC_UX500 for ux500 Enable ux500 specific ALSA SoC drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 13:28:13 +00:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_UX500=y
CONFIG_SND_SOC_UX500_MACH_MOP500=y
ARM: ux500: select WATCHDOG and MUSB for ux500 Enable ux500 specific USB and watchdog drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-21 12:31:53 +00:00
CONFIG_USB=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y
CONFIG_USB_PHY=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 06:51:25 +00:00
CONFIG_AB8500_USB=y
mach-ux500: activate USB in the U8500 defconfig Activate the new USB stuff so we atleast get some compile coverage for this stuff. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-01 15:09:52 +00:00
CONFIG_USB_GADGET=y
ARM: ux500: select WATCHDOG and MUSB for ux500 Enable ux500 specific USB and watchdog drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-21 12:31:53 +00:00
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_ETH=m
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_MMC=y
ARM: ux500: Update MMC configs for u8500 defconfig Enable MMC_UNSAFE_RESUME to be accomplish a proper suspend/resume cycle for SD/SDIO/(e)MMC. ARMMMCI host driver supports clock gating through runtime PM, thus MMC_CLKGATE is not needed. Moreover ARMMMCI can do scatter-gather which means we can explicity disable MMC_BLOCK_BOUNCE, since it's default enabled, to skip unnecessary bounce buffer copying. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27 12:30:15 +00:00
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
CONFIG_LEDS_LM3530=y
ARM: ux500: don't select LEDS_GPIO for snowball Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>
2012-08-15 20:34:48 +00:00
CONFIG_LEDS_GPIO=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 06:51:25 +00:00
CONFIG_LEDS_LP5521=y
ARM: ux500: Turn on the 'heartbeat' LED trigger The heartbeat LED trigger provides an excellent debugging tool when hacking on development boards. Here we enable it on all u8500 based platforms. This will pulse the User LED on the Snowball low-cost development board only. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-21 13:35:40 +00:00
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-16 19:30:35 +00:00
CONFIG_HSEM_U8500=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_EXT3_FS=y
ARM: ux500: enable ux500 EXT4_FS and LBDAF support by default EXT4 file system and LBDAF are used commonly, should be enabled by default. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30 09:21:40 +00:00
CONFIG_EXT4_FS=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_VFAT_FS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 12:01:02 +00:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_MAGIC_SYSRQ=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 08:08:41 +00:00
CONFIG_DEBUG_FS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 04:43:53 +00:00
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 06:51:25 +00:00
CONFIG_CRYPTO_DEV_UX500=y
CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
Reference in New Issue Copy Permalink