kernel-ark/arch/x86/kernel/kprobes.c

1576 lines
43 KiB
C
Raw Normal View History

/*
* Kernel Probes (KProbes)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2002, 2004
*
* 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
* Probes initial implementation ( includes contributions from
* Rusty Russell).
* 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
* interface to access function arguments.
* 2004-Oct Jim Keniston <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
* <prasanna@in.ibm.com> adapted for x86_64 from i386.
* 2005-Mar Roland McGrath <roland@redhat.com>
* Fixed to handle %rip-relative addressing mode correctly.
* 2005-May Hien Nguyen <hien@us.ibm.com>, Jim Keniston
* <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
* <prasanna@in.ibm.com> added function-return probes.
* 2005-May Rusty Lynch <rusty.lynch@intel.com>
* Added function return probes functionality
* 2006-Feb Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> added
* kprobe-booster and kretprobe-booster for i386.
* 2007-Dec Masami Hiramatsu <mhiramat@redhat.com> added kprobe-booster
* and kretprobe-booster for x86-64
* 2007-Dec Masami Hiramatsu <mhiramat@redhat.com>, Arjan van de Ven
* <arjan@infradead.org> and Jim Keniston <jkenisto@us.ibm.com>
* unified x86 kprobes code.
*/
#include <linux/kprobes.h>
#include <linux/ptrace.h>
#include <linux/string.h>
#include <linux/slab.h>
x86: code clarification patch to Kprobes arch code When developing the Kprobes arch code for ARM, I ran across some code found in x86 and s390 Kprobes arch code which I didn't consider as good as it could be. Once I figured out what the code was doing, I changed the code for ARM Kprobes to work the way I felt was more appropriate. I've tested the code this way in ARM for about a year and would like to push the same change to the other affected architectures. The code in question is in kprobe_exceptions_notify() which does: ==== /* kprobe_running() needs smp_processor_id() */ preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; preempt_enable(); ==== For the moment, ignore the code having the preempt_disable()/ preempt_enable() pair in it. The problem is that kprobe_running() needs to call smp_processor_id() which will assert if preemption is enabled. That sanity check by smp_processor_id() makes perfect sense since calling it with preemption enabled would return an unreliable result. But the function kprobe_exceptions_notify() can be called from a context where preemption could be enabled. If that happens, the assertion in smp_processor_id() happens and we're dead. So what the original author did (speculation on my part!) is put in the preempt_disable()/preempt_enable() pair to simply defeat the check. Once I figured out what was going on, I considered this an inappropriate approach. If kprobe_exceptions_notify() is called from a preemptible context, we can't be in a kprobe processing context at that time anyways since kprobes requires preemption to already be disabled, so just check for preemption enabled, and if so, blow out before ever calling kprobe_running(). I wrote the ARM kprobe code like this: ==== /* To be potentially processing a kprobe fault and to * trust the result from kprobe_running(), we have * be non-preemptible. */ if (!preemptible() && kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; ==== The above code has been working fine for ARM Kprobes for a year. So I changed the x86 code (2.6.24-rc6) to be the same way and ran the Systemtap tests on that kernel. As on ARM, Systemtap on x86 comes up with the same test results either way, so it's a neutral external functional change (as expected). This issue has been discussed previously on linux-arm-kernel and the Systemtap mailing lists. Pointers to the by base for the two discussions: http://lists.arm.linux.org.uk/lurker/message/20071219.223225.1f5c2a5e.en.html http://sourceware.org/ml/systemtap/2007-q1/msg00251.html Signed-off-by: Quentin Barnes <qbarnes@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com> Acked-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
2008-01-30 12:32:32 +00:00
#include <linux/hardirq.h>
#include <linux/preempt.h>
#include <linux/module.h>
#include <linux/kdebug.h>
#include <linux/kallsyms.h>
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
#include <linux/ftrace.h>
#include <asm/cacheflush.h>
#include <asm/desc.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <asm/alternative.h>
#include <asm/insn.h>
#include <asm/debugreg.h>
void jprobe_return_end(void);
DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
#define stack_addr(regs) ((unsigned long *)kernel_stack_pointer(regs))
#define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \
(b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \
(b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \
(bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \
<< (row % 32))
/*
* Undefined/reserved opcodes, conditional jump, Opcode Extension
* Groups, and some special opcodes can not boost.
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-26 15:03:38 +00:00
* This is non-const and volatile to keep gcc from statically
* optimizing it out, as variable_test_bit makes gcc think only
* *(unsigned long*) is used.
*/
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-26 15:03:38 +00:00
static volatile u32 twobyte_is_boostable[256 / 32] = {
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
/* ---------------------------------------------- */
W(0x00, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0) | /* 00 */
W(0x10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 10 */
W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 20 */
W(0x30, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 30 */
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
W(0x50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 50 */
W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1) | /* 60 */
W(0x70, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1) , /* 70 */
W(0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 80 */
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
W(0xa0, 1, 1, 0, 1, 1, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) | /* a0 */
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1) , /* b0 */
W(0xc0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
W(0xd0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) , /* d0 */
W(0xe0, 0, 1, 1, 0, 0, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) | /* e0 */
W(0xf0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 1, 0, 1, 1, 1, 0) /* f0 */
/* ----------------------------------------------- */
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
};
#undef W
struct kretprobe_blackpoint kretprobe_blacklist[] = {
{"__switch_to", }, /* This function switches only current task, but
doesn't switch kernel stack.*/
{NULL, NULL} /* Terminator */
};
const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
static void __kprobes __synthesize_relative_insn(void *from, void *to, u8 op)
{
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
struct __arch_relative_insn {
u8 op;
s32 raddr;
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
} __attribute__((packed)) *insn;
insn = (struct __arch_relative_insn *)from;
insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
insn->op = op;
}
/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/
static void __kprobes synthesize_reljump(void *from, void *to)
{
__synthesize_relative_insn(from, to, RELATIVEJUMP_OPCODE);
}
/*
* Skip the prefixes of the instruction.
*/
static kprobe_opcode_t *__kprobes skip_prefixes(kprobe_opcode_t *insn)
{
insn_attr_t attr;
attr = inat_get_opcode_attribute((insn_byte_t)*insn);
while (inat_is_legacy_prefix(attr)) {
insn++;
attr = inat_get_opcode_attribute((insn_byte_t)*insn);
}
#ifdef CONFIG_X86_64
if (inat_is_rex_prefix(attr))
insn++;
#endif
return insn;
}
/*
* Returns non-zero if opcode is boostable.
* RIP relative instructions are adjusted at copying time in 64 bits mode
*/
static int __kprobes can_boost(kprobe_opcode_t *opcodes)
{
kprobe_opcode_t opcode;
kprobe_opcode_t *orig_opcodes = opcodes;
if (search_exception_tables((unsigned long)opcodes))
return 0; /* Page fault may occur on this address. */
retry:
if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
return 0;
opcode = *(opcodes++);
/* 2nd-byte opcode */
if (opcode == 0x0f) {
if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
return 0;
return test_bit(*opcodes,
(unsigned long *)twobyte_is_boostable);
}
switch (opcode & 0xf0) {
#ifdef CONFIG_X86_64
case 0x40:
goto retry; /* REX prefix is boostable */
#endif
case 0x60:
if (0x63 < opcode && opcode < 0x67)
goto retry; /* prefixes */
/* can't boost Address-size override and bound */
return (opcode != 0x62 && opcode != 0x67);
case 0x70:
return 0; /* can't boost conditional jump */
case 0xc0:
/* can't boost software-interruptions */
return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf;
case 0xd0:
/* can boost AA* and XLAT */
return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7);
case 0xe0:
/* can boost in/out and absolute jmps */
return ((opcode & 0x04) || opcode == 0xea);
case 0xf0:
if ((opcode & 0x0c) == 0 && opcode != 0xf1)
goto retry; /* lock/rep(ne) prefix */
/* clear and set flags are boostable */
return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe));
default:
/* segment override prefixes are boostable */
if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e)
goto retry; /* prefixes */
/* CS override prefix and call are not boostable */
return (opcode != 0x2e && opcode != 0x9a);
}
}
/* Recover the probed instruction at addr for further analysis. */
static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
{
struct kprobe *kp;
kp = get_kprobe((void *)addr);
if (!kp)
return -EINVAL;
/*
* Basically, kp->ainsn.insn has an original instruction.
* However, RIP-relative instruction can not do single-stepping
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
* at different place, __copy_instruction() tweaks the displacement of
* that instruction. In that case, we can't recover the instruction
* from the kp->ainsn.insn.
*
* On the other hand, kp->opcode has a copy of the first byte of
* the probed instruction, which is overwritten by int3. And
* the instruction at kp->addr is not modified by kprobes except
* for the first byte, we can recover the original instruction
* from it and kp->opcode.
*/
memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
buf[0] = kp->opcode;
return 0;
}
/* Check if paddr is at an instruction boundary */
static int __kprobes can_probe(unsigned long paddr)
{
int ret;
unsigned long addr, offset = 0;
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
if (!kallsyms_lookup_size_offset(paddr, NULL, &offset))
return 0;
/* Decode instructions */
addr = paddr - offset;
while (addr < paddr) {
kernel_insn_init(&insn, (void *)addr);
insn_get_opcode(&insn);
/*
* Check if the instruction has been modified by another
* kprobe, in which case we replace the breakpoint by the
* original instruction in our buffer.
*/
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
ret = recover_probed_instruction(buf, addr);
if (ret)
/*
* Another debugging subsystem might insert
* this breakpoint. In that case, we can't
* recover it.
*/
return 0;
kernel_insn_init(&insn, buf);
}
insn_get_length(&insn);
addr += insn.length;
}
return (addr == paddr);
}
/*
* Returns non-zero if opcode modifies the interrupt flag.
*/
static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
{
/* Skip prefixes */
insn = skip_prefixes(insn);
switch (*insn) {
case 0xfa: /* cli */
case 0xfb: /* sti */
case 0xcf: /* iret/iretd */
case 0x9d: /* popf/popfd */
return 1;
}
return 0;
}
/*
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
* Copy an instruction and adjust the displacement if the instruction
* uses the %rip-relative addressing mode.
* If it does, Return the address of the 32-bit displacement word.
* If not, return null.
* Only applicable to 64-bit x86.
*/
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
{
struct insn insn;
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
int ret;
kprobe_opcode_t buf[MAX_INSN_SIZE];
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
kernel_insn_init(&insn, src);
if (recover) {
insn_get_opcode(&insn);
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
ret = recover_probed_instruction(buf,
(unsigned long)src);
if (ret)
return 0;
kernel_insn_init(&insn, buf);
}
}
insn_get_length(&insn);
memcpy(dest, insn.kaddr, insn.length);
#ifdef CONFIG_X86_64
if (insn_rip_relative(&insn)) {
s64 newdisp;
u8 *disp;
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
kernel_insn_init(&insn, dest);
insn_get_displacement(&insn);
/*
* The copied instruction uses the %rip-relative addressing
* mode. Adjust the displacement for the difference between
* the original location of this instruction and the location
* of the copy that will actually be run. The tricky bit here
* is making sure that the sign extension happens correctly in
* this calculation, since we need a signed 32-bit result to
* be sign-extended to 64 bits when it's added to the %rip
* value and yield the same 64-bit result that the sign-
* extension of the original signed 32-bit displacement would
* have given.
*/
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
newdisp = (u8 *) src + (s64) insn.displacement.value -
(u8 *) dest;
BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
disp = (u8 *) dest + insn_offset_displacement(&insn);
*(s32 *) disp = (s32) newdisp;
}
#endif
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
return insn.length;
}
static void __kprobes arch_copy_kprobe(struct kprobe *p)
{
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
/*
* Copy an instruction without recovering int3, because it will be
* put by another subsystem.
*/
__copy_instruction(p->ainsn.insn, p->addr, 0);
if (can_boost(p->addr))
p->ainsn.boostable = 0;
else
p->ainsn.boostable = -1;
[PATCH] Move kprobe [dis]arming into arch specific code The architecture independent code of the current kprobes implementation is arming and disarming kprobes at registration time. The problem is that the code is assuming that arming and disarming is a just done by a simple write of some magic value to an address. This is problematic for ia64 where our instructions look more like structures, and we can not insert break points by just doing something like: *p->addr = BREAKPOINT_INSTRUCTION; The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent functions: * void arch_arm_kprobe(struct kprobe *p) * void arch_disarm_kprobe(struct kprobe *p) and then adds the new functions for each of the architectures that already implement kprobes (spar64/ppc64/i386/x86_64). I thought arch_[dis]arm_kprobe was the most descriptive of what was really happening, but each of the architectures already had a disarm_kprobe() function that was really a "disarm and do some other clean-up items as needed when you stumble across a recursive kprobe." So... I took the liberty of changing the code that was calling disarm_kprobe() to call arch_disarm_kprobe(), and then do the cleanup in the block of code dealing with the recursive kprobe case. So far this patch as been tested on i386, x86_64, and ppc64, but still needs to be tested in sparc64. Signed-off-by: Rusty Lynch <rusty.lynch@intel.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:25 +00:00
p->opcode = *p->addr;
}
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
if (alternatives_text_reserved(p->addr, p->addr))
return -EINVAL;
if (!can_probe((unsigned long)p->addr))
return -EILSEQ;
/* insn: must be on special executable page on x86. */
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn)
return -ENOMEM;
arch_copy_kprobe(p);
return 0;
}
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1);
}
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
text_poke(p->addr, &p->opcode, 1);
[PATCH] Move kprobe [dis]arming into arch specific code The architecture independent code of the current kprobes implementation is arming and disarming kprobes at registration time. The problem is that the code is assuming that arming and disarming is a just done by a simple write of some magic value to an address. This is problematic for ia64 where our instructions look more like structures, and we can not insert break points by just doing something like: *p->addr = BREAKPOINT_INSTRUCTION; The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent functions: * void arch_arm_kprobe(struct kprobe *p) * void arch_disarm_kprobe(struct kprobe *p) and then adds the new functions for each of the architectures that already implement kprobes (spar64/ppc64/i386/x86_64). I thought arch_[dis]arm_kprobe was the most descriptive of what was really happening, but each of the architectures already had a disarm_kprobe() function that was really a "disarm and do some other clean-up items as needed when you stumble across a recursive kprobe." So... I took the liberty of changing the code that was calling disarm_kprobe() to call arch_disarm_kprobe(), and then do the cleanup in the block of code dealing with the recursive kprobe case. So far this patch as been tested on i386, x86_64, and ppc64, but still needs to be tested in sparc64. Signed-off-by: Rusty Lynch <rusty.lynch@intel.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:25 +00:00
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
[PATCH] Move kprobe [dis]arming into arch specific code The architecture independent code of the current kprobes implementation is arming and disarming kprobes at registration time. The problem is that the code is assuming that arming and disarming is a just done by a simple write of some magic value to an address. This is problematic for ia64 where our instructions look more like structures, and we can not insert break points by just doing something like: *p->addr = BREAKPOINT_INSTRUCTION; The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent functions: * void arch_arm_kprobe(struct kprobe *p) * void arch_disarm_kprobe(struct kprobe *p) and then adds the new functions for each of the architectures that already implement kprobes (spar64/ppc64/i386/x86_64). I thought arch_[dis]arm_kprobe was the most descriptive of what was really happening, but each of the architectures already had a disarm_kprobe() function that was really a "disarm and do some other clean-up items as needed when you stumble across a recursive kprobe." So... I took the liberty of changing the code that was calling disarm_kprobe() to call arch_disarm_kprobe(), and then do the cleanup in the block of code dealing with the recursive kprobe case. So far this patch as been tested on i386, x86_64, and ppc64, but still needs to be tested in sparc64. Signed-off-by: Rusty Lynch <rusty.lynch@intel.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:25 +00:00
{
if (p->ainsn.insn) {
free_insn_slot(p->ainsn.insn, (p->ainsn.boostable == 1));
p->ainsn.insn = NULL;
}
}
static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
kcb->prev_kprobe.status = kcb->kprobe_status;
kcb->prev_kprobe.old_flags = kcb->kprobe_old_flags;
kcb->prev_kprobe.saved_flags = kcb->kprobe_saved_flags;
}
static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
kcb->kprobe_status = kcb->prev_kprobe.status;
kcb->kprobe_old_flags = kcb->prev_kprobe.old_flags;
kcb->kprobe_saved_flags = kcb->prev_kprobe.saved_flags;
}
static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
__this_cpu_write(current_kprobe, p);
kcb->kprobe_saved_flags = kcb->kprobe_old_flags
= (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
if (is_IF_modifier(p->ainsn.insn))
kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF;
}
static void __kprobes clear_btf(void)
{
if (test_thread_flag(TIF_BLOCKSTEP)) {
unsigned long debugctl = get_debugctlmsr();
debugctl &= ~DEBUGCTLMSR_BTF;
update_debugctlmsr(debugctl);
}
}
static void __kprobes restore_btf(void)
{
if (test_thread_flag(TIF_BLOCKSTEP)) {
unsigned long debugctl = get_debugctlmsr();
debugctl |= DEBUGCTLMSR_BTF;
update_debugctlmsr(debugctl);
}
}
void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
struct pt_regs *regs)
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
{
unsigned long *sara = stack_addr(regs);
ri->ret_addr = (kprobe_opcode_t *) *sara;
/* Replace the return addr with trampoline addr */
*sara = (unsigned long) &kretprobe_trampoline;
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
}
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
#ifdef CONFIG_OPTPROBES
static int __kprobes setup_detour_execution(struct kprobe *p,
struct pt_regs *regs,
int reenter);
#else
#define setup_detour_execution(p, regs, reenter) (0)
#endif
static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb, int reenter)
{
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
if (setup_detour_execution(p, regs, reenter))
return;
#if !defined(CONFIG_PREEMPT)
if (p->ainsn.boostable == 1 && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
if (!reenter)
reset_current_kprobe();
/*
* Reentering boosted probe doesn't reset current_kprobe,
* nor set current_kprobe, because it doesn't use single
* stepping.
*/
regs->ip = (unsigned long)p->ainsn.insn;
preempt_enable_no_resched();
return;
}
#endif
if (reenter) {
save_previous_kprobe(kcb);
set_current_kprobe(p, regs, kcb);
kcb->kprobe_status = KPROBE_REENTER;
} else
kcb->kprobe_status = KPROBE_HIT_SS;
/* Prepare real single stepping */
clear_btf();
regs->flags |= X86_EFLAGS_TF;
regs->flags &= ~X86_EFLAGS_IF;
/* single step inline if the instruction is an int3 */
if (p->opcode == BREAKPOINT_INSTRUCTION)
regs->ip = (unsigned long)p->addr;
else
regs->ip = (unsigned long)p->ainsn.insn;
}
/*
* We have reentered the kprobe_handler(), since another probe was hit while
* within the handler. We save the original kprobes variables and just single
* step on the instruction of the new probe without calling any user handlers.
*/
static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
switch (kcb->kprobe_status) {
case KPROBE_HIT_SSDONE:
case KPROBE_HIT_ACTIVE:
kprobes_inc_nmissed_count(p);
setup_singlestep(p, regs, kcb, 1);
break;
case KPROBE_HIT_SS:
/* A probe has been hit in the codepath leading up to, or just
* after, single-stepping of a probed instruction. This entire
* codepath should strictly reside in .kprobes.text section.
* Raise a BUG or we'll continue in an endless reentering loop
* and eventually a stack overflow.
*/
printk(KERN_WARNING "Unrecoverable kprobe detected at %p.\n",
p->addr);
dump_kprobe(p);
BUG();
default:
/* impossible cases */
WARN_ON(1);
return 0;
}
return 1;
}
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate and they
* remain disabled throughout this function.
*/
static int __kprobes kprobe_handler(struct pt_regs *regs)
{
kprobe_opcode_t *addr;
struct kprobe *p;
struct kprobe_ctlblk *kcb;
addr = (kprobe_opcode_t *)(regs->ip - sizeof(kprobe_opcode_t));
/*
* We don't want to be preempted for the entire
* duration of kprobe processing. We conditionally
* re-enable preemption at the end of this function,
* and also in reenter_kprobe() and setup_singlestep().
*/
preempt_disable();
kcb = get_kprobe_ctlblk();
p = get_kprobe(addr);
if (p) {
if (kprobe_running()) {
if (reenter_kprobe(p, regs, kcb))
return 1;
} else {
set_current_kprobe(p, regs, kcb);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
/*
* If we have no pre-handler or it returned 0, we
* continue with normal processing. If we have a
* pre-handler and it returned non-zero, it prepped
* for calling the break_handler below on re-entry
* for jprobe processing, so get out doing nothing
* more here.
*/
if (!p->pre_handler || !p->pre_handler(p, regs))
setup_singlestep(p, regs, kcb, 0);
return 1;
}
} else if (*addr != BREAKPOINT_INSTRUCTION) {
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
* Back up over the (now missing) int3 and run
* the original instruction.
*/
regs->ip = (unsigned long)addr;
preempt_enable_no_resched();
return 1;
} else if (kprobe_running()) {
p = __this_cpu_read(current_kprobe);
if (p->break_handler && p->break_handler(p, regs)) {
setup_singlestep(p, regs, kcb, 0);
return 1;
}
} /* else: not a kprobe fault; let the kernel handle it */
preempt_enable_no_resched();
return 0;
}
#ifdef CONFIG_X86_64
#define SAVE_REGS_STRING \
/* Skip cs, ip, orig_ax. */ \
" subq $24, %rsp\n" \
" pushq %rdi\n" \
" pushq %rsi\n" \
" pushq %rdx\n" \
" pushq %rcx\n" \
" pushq %rax\n" \
" pushq %r8\n" \
" pushq %r9\n" \
" pushq %r10\n" \
" pushq %r11\n" \
" pushq %rbx\n" \
" pushq %rbp\n" \
" pushq %r12\n" \
" pushq %r13\n" \
" pushq %r14\n" \
" pushq %r15\n"
#define RESTORE_REGS_STRING \
" popq %r15\n" \
" popq %r14\n" \
" popq %r13\n" \
" popq %r12\n" \
" popq %rbp\n" \
" popq %rbx\n" \
" popq %r11\n" \
" popq %r10\n" \
" popq %r9\n" \
" popq %r8\n" \
" popq %rax\n" \
" popq %rcx\n" \
" popq %rdx\n" \
" popq %rsi\n" \
" popq %rdi\n" \
/* Skip orig_ax, ip, cs */ \
" addq $24, %rsp\n"
#else
#define SAVE_REGS_STRING \
/* Skip cs, ip, orig_ax and gs. */ \
" subl $16, %esp\n" \
" pushl %fs\n" \
" pushl %es\n" \
" pushl %ds\n" \
" pushl %eax\n" \
" pushl %ebp\n" \
" pushl %edi\n" \
" pushl %esi\n" \
" pushl %edx\n" \
" pushl %ecx\n" \
" pushl %ebx\n"
#define RESTORE_REGS_STRING \
" popl %ebx\n" \
" popl %ecx\n" \
" popl %edx\n" \
" popl %esi\n" \
" popl %edi\n" \
" popl %ebp\n" \
" popl %eax\n" \
/* Skip ds, es, fs, gs, orig_ax, and ip. Note: don't pop cs here*/\
" addl $24, %esp\n"
#endif
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
/*
* When a retprobed function returns, this code saves registers and
* calls trampoline_handler() runs, which calls the kretprobe's handler.
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
*/
static void __used __kprobes kretprobe_trampoline_holder(void)
{
asm volatile (
".global kretprobe_trampoline\n"
"kretprobe_trampoline: \n"
#ifdef CONFIG_X86_64
/* We don't bother saving the ss register */
" pushq %rsp\n"
" pushfq\n"
SAVE_REGS_STRING
" movq %rsp, %rdi\n"
" call trampoline_handler\n"
/* Replace saved sp with true return address. */
" movq %rax, 152(%rsp)\n"
RESTORE_REGS_STRING
" popfq\n"
#else
" pushf\n"
SAVE_REGS_STRING
" movl %esp, %eax\n"
" call trampoline_handler\n"
/* Move flags to cs */
" movl 56(%esp), %edx\n"
" movl %edx, 52(%esp)\n"
/* Replace saved flags with true return address. */
" movl %eax, 56(%esp)\n"
RESTORE_REGS_STRING
" popf\n"
#endif
" ret\n");
}
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
/*
* Called from kretprobe_trampoline
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
*/
static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
{
struct kretprobe_instance *ri = NULL;
struct hlist_head *head, empty_rp;
struct hlist_node *node, *tmp;
unsigned long flags, orig_ret_address = 0;
unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
kprobe_opcode_t *correct_ret_addr = NULL;
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
INIT_HLIST_HEAD(&empty_rp);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:46:04 +00:00
kretprobe_hash_lock(current, &head, &flags);
/* fixup registers */
#ifdef CONFIG_X86_64
regs->cs = __KERNEL_CS;
#else
regs->cs = __KERNEL_CS | get_kernel_rpl();
regs->gs = 0;
#endif
regs->ip = trampoline_address;
regs->orig_ax = ~0UL;
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
/*
* It is possible to have multiple instances associated with a given
* task either because multiple functions in the call path have
* return probes installed on them, and/or more than one
* return probe was registered for a target function.
*
* We can handle this because:
* - instances are always pushed into the head of the list
* - when multiple return probes are registered for the same
* function, the (chronologically) first instance's ret_addr
* will be the real return address, and all the rest will
* point to kretprobe_trampoline.
*/
hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
if (ri->task != current)
/* another task is sharing our hash bucket */
continue;
orig_ret_address = (unsigned long)ri->ret_addr;
if (orig_ret_address != trampoline_address)
/*
* This is the real return address. Any other
* instances associated with this task are for
* other calls deeper on the call stack
*/
break;
}
kretprobe_assert(ri, orig_ret_address, trampoline_address);
correct_ret_addr = ri->ret_addr;
hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
if (ri->task != current)
/* another task is sharing our hash bucket */
continue;
orig_ret_address = (unsigned long)ri->ret_addr;
if (ri->rp && ri->rp->handler) {
__this_cpu_write(current_kprobe, &ri->rp->kp);
get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
ri->ret_addr = correct_ret_addr;
ri->rp->handler(ri, regs);
__this_cpu_write(current_kprobe, NULL);
}
recycle_rp_inst(ri, &empty_rp);
if (orig_ret_address != trampoline_address)
/*
* This is the real return address. Any other
* instances associated with this task are for
* other calls deeper on the call stack
*/
break;
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
}
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:46:04 +00:00
kretprobe_hash_unlock(current, &flags);
hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
hlist_del(&ri->hlist);
kfree(ri);
}
return (void *)orig_ret_address;
[PATCH] x86_64 specific function return probes The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:23 +00:00
}
/*
* Called after single-stepping. p->addr is the address of the
* instruction whose first byte has been replaced by the "int 3"
* instruction. To avoid the SMP problems that can occur when we
* temporarily put back the original opcode to single-step, we
* single-stepped a copy of the instruction. The address of this
* copy is p->ainsn.insn.
*
* This function prepares to return from the post-single-step
* interrupt. We have to fix up the stack as follows:
*
* 0) Except in the case of absolute or indirect jump or call instructions,
* the new ip is relative to the copied instruction. We need to make
* it relative to the original instruction.
*
* 1) If the single-stepped instruction was pushfl, then the TF and IF
* flags are set in the just-pushed flags, and may need to be cleared.
*
* 2) If the single-stepped instruction was a call, the return address
* that is atop the stack is the address following the copied instruction.
* We need to make it the address following the original instruction.
*
* If this is the first time we've single-stepped the instruction at
* this probepoint, and the instruction is boostable, boost it: add a
* jump instruction after the copied instruction, that jumps to the next
* instruction after the probepoint.
*/
static void __kprobes resume_execution(struct kprobe *p,
struct pt_regs *regs, struct kprobe_ctlblk *kcb)
{
unsigned long *tos = stack_addr(regs);
unsigned long copy_ip = (unsigned long)p->ainsn.insn;
unsigned long orig_ip = (unsigned long)p->addr;
kprobe_opcode_t *insn = p->ainsn.insn;
/* Skip prefixes */
insn = skip_prefixes(insn);
regs->flags &= ~X86_EFLAGS_TF;
switch (*insn) {
case 0x9c: /* pushfl */
*tos &= ~(X86_EFLAGS_TF | X86_EFLAGS_IF);
*tos |= kcb->kprobe_old_flags;
break;
case 0xc2: /* iret/ret/lret */
case 0xc3:
case 0xca:
case 0xcb:
case 0xcf:
case 0xea: /* jmp absolute -- ip is correct */
/* ip is already adjusted, no more changes required */
p->ainsn.boostable = 1;
goto no_change;
case 0xe8: /* call relative - Fix return addr */
*tos = orig_ip + (*tos - copy_ip);
break;
#ifdef CONFIG_X86_32
case 0x9a: /* call absolute -- same as call absolute, indirect */
*tos = orig_ip + (*tos - copy_ip);
goto no_change;
#endif
case 0xff:
if ((insn[1] & 0x30) == 0x10) {
/*
* call absolute, indirect
* Fix return addr; ip is correct.
* But this is not boostable
*/
*tos = orig_ip + (*tos - copy_ip);
goto no_change;
} else if (((insn[1] & 0x31) == 0x20) ||
((insn[1] & 0x31) == 0x21)) {
/*
* jmp near and far, absolute indirect
* ip is correct. And this is boostable
*/
p->ainsn.boostable = 1;
goto no_change;
}
default:
break;
}
if (p->ainsn.boostable == 0) {
if ((regs->ip > copy_ip) &&
(regs->ip - copy_ip) + 5 < MAX_INSN_SIZE) {
/*
* These instructions can be executed directly if it
* jumps back to correct address.
*/
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
synthesize_reljump((void *)regs->ip,
(void *)orig_ip + (regs->ip - copy_ip));
p->ainsn.boostable = 1;
} else {
p->ainsn.boostable = -1;
}
}
regs->ip += orig_ip - copy_ip;
no_change:
restore_btf();
}
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate and they
* remain disabled throughout this function.
*/
static int __kprobes post_kprobe_handler(struct pt_regs *regs)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
if (!cur)
return 0;
resume_execution(cur, regs, kcb);
regs->flags |= kcb->kprobe_saved_flags;
if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
kcb->kprobe_status = KPROBE_HIT_SSDONE;
cur->post_handler(cur, regs, 0);
}
/* Restore back the original saved kprobes variables and continue. */
if (kcb->kprobe_status == KPROBE_REENTER) {
restore_previous_kprobe(kcb);
goto out;
}
reset_current_kprobe();
out:
preempt_enable_no_resched();
/*
* if somebody else is singlestepping across a probe point, flags
* will have TF set, in which case, continue the remaining processing
* of do_debug, as if this is not a probe hit.
*/
if (regs->flags & X86_EFLAGS_TF)
return 0;
return 1;
}
int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
switch (kcb->kprobe_status) {
case KPROBE_HIT_SS:
case KPROBE_REENTER:
/*
* We are here because the instruction being single
* stepped caused a page fault. We reset the current
* kprobe and the ip points back to the probe address
* and allow the page fault handler to continue as a
* normal page fault.
*/
regs->ip = (unsigned long)cur->addr;
regs->flags |= kcb->kprobe_old_flags;
if (kcb->kprobe_status == KPROBE_REENTER)
restore_previous_kprobe(kcb);
else
reset_current_kprobe();
preempt_enable_no_resched();
break;
case KPROBE_HIT_ACTIVE:
case KPROBE_HIT_SSDONE:
/*
* We increment the nmissed count for accounting,
* we can also use npre/npostfault count for accounting
* these specific fault cases.
*/
kprobes_inc_nmissed_count(cur);
/*
* We come here because instructions in the pre/post
* handler caused the page_fault, this could happen
* if handler tries to access user space by
* copy_from_user(), get_user() etc. Let the
* user-specified handler try to fix it first.
*/
if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
return 1;
/*
* In case the user-specified fault handler returned
* zero, try to fix up.
*/
if (fixup_exception(regs))
return 1;
/*
* fixup routine could not handle it,
* Let do_page_fault() fix it.
*/
break;
default:
break;
}
return 0;
}
/*
* Wrapper routine for handling exceptions.
*/
int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct die_args *args = data;
2005-11-07 09:00:07 +00:00
int ret = NOTIFY_DONE;
if (args->regs && user_mode_vm(args->regs))
return ret;
switch (val) {
case DIE_INT3:
if (kprobe_handler(args->regs))
2005-11-07 09:00:07 +00:00
ret = NOTIFY_STOP;
break;
case DIE_DEBUG:
if (post_kprobe_handler(args->regs)) {
/*
* Reset the BS bit in dr6 (pointed by args->err) to
* denote completion of processing
*/
(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
2005-11-07 09:00:07 +00:00
ret = NOTIFY_STOP;
}
break;
case DIE_GPF:
x86: code clarification patch to Kprobes arch code When developing the Kprobes arch code for ARM, I ran across some code found in x86 and s390 Kprobes arch code which I didn't consider as good as it could be. Once I figured out what the code was doing, I changed the code for ARM Kprobes to work the way I felt was more appropriate. I've tested the code this way in ARM for about a year and would like to push the same change to the other affected architectures. The code in question is in kprobe_exceptions_notify() which does: ==== /* kprobe_running() needs smp_processor_id() */ preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; preempt_enable(); ==== For the moment, ignore the code having the preempt_disable()/ preempt_enable() pair in it. The problem is that kprobe_running() needs to call smp_processor_id() which will assert if preemption is enabled. That sanity check by smp_processor_id() makes perfect sense since calling it with preemption enabled would return an unreliable result. But the function kprobe_exceptions_notify() can be called from a context where preemption could be enabled. If that happens, the assertion in smp_processor_id() happens and we're dead. So what the original author did (speculation on my part!) is put in the preempt_disable()/preempt_enable() pair to simply defeat the check. Once I figured out what was going on, I considered this an inappropriate approach. If kprobe_exceptions_notify() is called from a preemptible context, we can't be in a kprobe processing context at that time anyways since kprobes requires preemption to already be disabled, so just check for preemption enabled, and if so, blow out before ever calling kprobe_running(). I wrote the ARM kprobe code like this: ==== /* To be potentially processing a kprobe fault and to * trust the result from kprobe_running(), we have * be non-preemptible. */ if (!preemptible() && kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; ==== The above code has been working fine for ARM Kprobes for a year. So I changed the x86 code (2.6.24-rc6) to be the same way and ran the Systemtap tests on that kernel. As on ARM, Systemtap on x86 comes up with the same test results either way, so it's a neutral external functional change (as expected). This issue has been discussed previously on linux-arm-kernel and the Systemtap mailing lists. Pointers to the by base for the two discussions: http://lists.arm.linux.org.uk/lurker/message/20071219.223225.1f5c2a5e.en.html http://sourceware.org/ml/systemtap/2007-q1/msg00251.html Signed-off-by: Quentin Barnes <qbarnes@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com> Acked-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
2008-01-30 12:32:32 +00:00
/*
* To be potentially processing a kprobe fault and to
* trust the result from kprobe_running(), we have
* be non-preemptible.
*/
if (!preemptible() && kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
2005-11-07 09:00:07 +00:00
ret = NOTIFY_STOP;
break;
default:
break;
}
2005-11-07 09:00:07 +00:00
return ret;
}
int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct jprobe *jp = container_of(p, struct jprobe, kp);
unsigned long addr;
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
kcb->jprobe_saved_regs = *regs;
kcb->jprobe_saved_sp = stack_addr(regs);
addr = (unsigned long)(kcb->jprobe_saved_sp);
/*
* As Linus pointed out, gcc assumes that the callee
* owns the argument space and could overwrite it, e.g.
* tailcall optimization. So, to be absolutely safe
* we also save and restore enough stack bytes to cover
* the argument area.
*/
memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
MIN_STACK_SIZE(addr));
regs->flags &= ~X86_EFLAGS_IF;
trace_hardirqs_off();
regs->ip = (unsigned long)(jp->entry);
return 1;
}
void __kprobes jprobe_return(void)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
asm volatile (
#ifdef CONFIG_X86_64
" xchg %%rbx,%%rsp \n"
#else
" xchgl %%ebx,%%esp \n"
#endif
" int3 \n"
" .globl jprobe_return_end\n"
" jprobe_return_end: \n"
" nop \n"::"b"
(kcb->jprobe_saved_sp):"memory");
}
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
u8 *addr = (u8 *) (regs->ip - 1);
struct jprobe *jp = container_of(p, struct jprobe, kp);
if ((addr > (u8 *) jprobe_return) &&
(addr < (u8 *) jprobe_return_end)) {
if (stack_addr(regs) != kcb->jprobe_saved_sp) {
struct pt_regs *saved_regs = &kcb->jprobe_saved_regs;
printk(KERN_ERR
"current sp %p does not match saved sp %p\n",
stack_addr(regs), kcb->jprobe_saved_sp);
printk(KERN_ERR "Saved registers for jprobe %p\n", jp);
show_registers(saved_regs);
printk(KERN_ERR "Current registers\n");
show_registers(regs);
BUG();
}
*regs = kcb->jprobe_saved_regs;
memcpy((kprobe_opcode_t *)(kcb->jprobe_saved_sp),
kcb->jprobes_stack,
MIN_STACK_SIZE(kcb->jprobe_saved_sp));
preempt_enable_no_resched();
return 1;
}
return 0;
}
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
#ifdef CONFIG_OPTPROBES
/* Insert a call instruction at address 'from', which calls address 'to'.*/
static void __kprobes synthesize_relcall(void *from, void *to)
{
__synthesize_relative_insn(from, to, RELATIVECALL_OPCODE);
}
/* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */
static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr,
unsigned long val)
{
#ifdef CONFIG_X86_64
*addr++ = 0x48;
*addr++ = 0xbf;
#else
*addr++ = 0xb8;
#endif
*(unsigned long *)addr = val;
}
static void __used __kprobes kprobes_optinsn_template_holder(void)
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
{
asm volatile (
".global optprobe_template_entry\n"
"optprobe_template_entry: \n"
#ifdef CONFIG_X86_64
/* We don't bother saving the ss register */
" pushq %rsp\n"
" pushfq\n"
SAVE_REGS_STRING
" movq %rsp, %rsi\n"
".global optprobe_template_val\n"
"optprobe_template_val: \n"
ASM_NOP5
ASM_NOP5
".global optprobe_template_call\n"
"optprobe_template_call: \n"
ASM_NOP5
/* Move flags to rsp */
" movq 144(%rsp), %rdx\n"
" movq %rdx, 152(%rsp)\n"
RESTORE_REGS_STRING
/* Skip flags entry */
" addq $8, %rsp\n"
" popfq\n"
#else /* CONFIG_X86_32 */
" pushf\n"
SAVE_REGS_STRING
" movl %esp, %edx\n"
".global optprobe_template_val\n"
"optprobe_template_val: \n"
ASM_NOP5
".global optprobe_template_call\n"
"optprobe_template_call: \n"
ASM_NOP5
RESTORE_REGS_STRING
" addl $4, %esp\n" /* skip cs */
" popf\n"
#endif
".global optprobe_template_end\n"
"optprobe_template_end: \n");
}
#define TMPL_MOVE_IDX \
((long)&optprobe_template_val - (long)&optprobe_template_entry)
#define TMPL_CALL_IDX \
((long)&optprobe_template_call - (long)&optprobe_template_entry)
#define TMPL_END_IDX \
((long)&optprobe_template_end - (long)&optprobe_template_entry)
#define INT3_SIZE sizeof(kprobe_opcode_t)
/* Optimized kprobe call back function: called from optinsn */
static void __kprobes optimized_callback(struct optimized_kprobe *op,
struct pt_regs *regs)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
unsigned long flags;
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
/* This is possible if op is under delayed unoptimizing */
if (kprobe_disabled(&op->kp))
return;
local_irq_save(flags);
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
if (kprobe_running()) {
kprobes_inc_nmissed_count(&op->kp);
} else {
/* Save skipped registers */
#ifdef CONFIG_X86_64
regs->cs = __KERNEL_CS;
#else
regs->cs = __KERNEL_CS | get_kernel_rpl();
regs->gs = 0;
#endif
regs->ip = (unsigned long)op->kp.addr + INT3_SIZE;
regs->orig_ax = ~0UL;
__this_cpu_write(current_kprobe, &op->kp);
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
opt_pre_handler(&op->kp, regs);
__this_cpu_write(current_kprobe, NULL);
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
}
local_irq_restore(flags);
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
}
static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
{
int len = 0, ret;
while (len < RELATIVEJUMP_SIZE) {
ret = __copy_instruction(dest + len, src + len, 1);
if (!ret || !can_boost(dest + len))
return -EINVAL;
len += ret;
}
/* Check whether the address range is reserved */
if (ftrace_text_reserved(src, src + len - 1) ||
alternatives_text_reserved(src, src + len - 1) ||
jump_label_text_reserved(src, src + len - 1))
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
return -EBUSY;
return len;
}
/* Check whether insn is indirect jump */
static int __kprobes insn_is_indirect_jump(struct insn *insn)
{
return ((insn->opcode.bytes[0] == 0xff &&
(X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */
insn->opcode.bytes[0] == 0xea); /* Segment based jump */
}
/* Check whether insn jumps into specified address range */
static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
{
unsigned long target = 0;
switch (insn->opcode.bytes[0]) {
case 0xe0: /* loopne */
case 0xe1: /* loope */
case 0xe2: /* loop */
case 0xe3: /* jcxz */
case 0xe9: /* near relative jump */
case 0xeb: /* short relative jump */
break;
case 0x0f:
if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */
break;
return 0;
default:
if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */
break;
return 0;
}
target = (unsigned long)insn->next_byte + insn->immediate.value;
return (start <= target && target <= start + len);
}
/* Decode whole function to ensure any instructions don't jump into target */
static int __kprobes can_optimize(unsigned long paddr)
{
int ret;
unsigned long addr, size = 0, offset = 0;
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
/* Lookup symbol including addr */
if (!kallsyms_lookup_size_offset(paddr, &size, &offset))
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
return 0;
/*
* Do not optimize in the entry code due to the unstable
* stack handling.
*/
if ((paddr >= (unsigned long )__entry_text_start) &&
(paddr < (unsigned long )__entry_text_end))
return 0;
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
/* Check there is enough space for a relative jump. */
if (size - offset < RELATIVEJUMP_SIZE)
return 0;
/* Decode instructions */
addr = paddr - offset;
while (addr < paddr - offset + size) { /* Decode until function end */
if (search_exception_tables(addr))
/*
* Since some fixup code will jumps into this function,
* we can't optimize kprobe in this function.
*/
return 0;
kernel_insn_init(&insn, (void *)addr);
insn_get_opcode(&insn);
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
ret = recover_probed_instruction(buf, addr);
if (ret)
return 0;
kernel_insn_init(&insn, buf);
}
insn_get_length(&insn);
/* Recover address */
insn.kaddr = (void *)addr;
insn.next_byte = (void *)(addr + insn.length);
/* Check any instructions don't jump into target */
if (insn_is_indirect_jump(&insn) ||
insn_jump_into_range(&insn, paddr + INT3_SIZE,
RELATIVE_ADDR_SIZE))
return 0;
addr += insn.length;
}
return 1;
}
/* Check optimized_kprobe can actually be optimized. */
int __kprobes arch_check_optimized_kprobe(struct optimized_kprobe *op)
{
int i;
struct kprobe *p;
for (i = 1; i < op->optinsn.size; i++) {
p = get_kprobe(op->kp.addr + i);
if (p && !kprobe_disabled(p))
return -EEXIST;
}
return 0;
}
/* Check the addr is within the optimized instructions. */
int __kprobes arch_within_optimized_kprobe(struct optimized_kprobe *op,
unsigned long addr)
{
return ((unsigned long)op->kp.addr <= addr &&
(unsigned long)op->kp.addr + op->optinsn.size > addr);
}
/* Free optimized instruction slot */
static __kprobes
void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
{
if (op->optinsn.insn) {
free_optinsn_slot(op->optinsn.insn, dirty);
op->optinsn.insn = NULL;
op->optinsn.size = 0;
}
}
void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
{
__arch_remove_optimized_kprobe(op, 1);
}
/*
* Copy replacing target instructions
* Target instructions MUST be relocatable (checked inside)
*/
int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
{
u8 *buf;
int ret;
long rel;
if (!can_optimize((unsigned long)op->kp.addr))
return -EILSEQ;
op->optinsn.insn = get_optinsn_slot();
if (!op->optinsn.insn)
return -ENOMEM;
/*
* Verify if the address gap is in 2GB range, because this uses
* a relative jump.
*/
rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE;
if (abs(rel) > 0x7fffffff)
return -ERANGE;
buf = (u8 *)op->optinsn.insn;
/* Copy instructions into the out-of-line buffer */
ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
if (ret < 0) {
__arch_remove_optimized_kprobe(op, 0);
return ret;
}
op->optinsn.size = ret;
/* Copy arch-dep-instance from template */
memcpy(buf, &optprobe_template_entry, TMPL_END_IDX);
/* Set probe information */
synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op);
/* Set probe function call */
synthesize_relcall(buf + TMPL_CALL_IDX, optimized_callback);
/* Set returning jmp instruction at the tail of out-of-line buffer */
synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
(u8 *)op->kp.addr + op->optinsn.size);
flush_icache_range((unsigned long) buf,
(unsigned long) buf + TMPL_END_IDX +
op->optinsn.size + RELATIVEJUMP_SIZE);
return 0;
}
#define MAX_OPTIMIZE_PROBES 256
static struct text_poke_param *jump_poke_params;
static struct jump_poke_buffer {
u8 buf[RELATIVEJUMP_SIZE];
} *jump_poke_bufs;
static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm,
u8 *insn_buf,
struct optimized_kprobe *op)
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
{
s32 rel = (s32)((long)op->optinsn.insn -
((long)op->kp.addr + RELATIVEJUMP_SIZE));
/* Backup instructions which will be replaced by jump address */
memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
RELATIVE_ADDR_SIZE);
insn_buf[0] = RELATIVEJUMP_OPCODE;
*(s32 *)(&insn_buf[1]) = rel;
tprm->addr = op->kp.addr;
tprm->opcode = insn_buf;
tprm->len = RELATIVEJUMP_SIZE;
}
/*
* Replace breakpoints (int3) with relative jumps.
* Caller must call with locking kprobe_mutex and text_mutex.
*/
void __kprobes arch_optimize_kprobes(struct list_head *oplist)
{
struct optimized_kprobe *op, *tmp;
int c = 0;
list_for_each_entry_safe(op, tmp, oplist, list) {
WARN_ON(kprobe_disabled(&op->kp));
/* Setup param */
setup_optimize_kprobe(&jump_poke_params[c],
jump_poke_bufs[c].buf, op);
list_del_init(&op->list);
if (++c >= MAX_OPTIMIZE_PROBES)
break;
}
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
/*
* text_poke_smp doesn't support NMI/MCE code modifying.
* However, since kprobes itself also doesn't support NMI/MCE
* code probing, it's not a problem.
*/
text_poke_smp_batch(jump_poke_params, c);
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
}
static void __kprobes setup_unoptimize_kprobe(struct text_poke_param *tprm,
u8 *insn_buf,
struct optimized_kprobe *op)
{
/* Set int3 to first byte for kprobes */
insn_buf[0] = BREAKPOINT_INSTRUCTION;
memcpy(insn_buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
tprm->addr = op->kp.addr;
tprm->opcode = insn_buf;
tprm->len = RELATIVEJUMP_SIZE;
}
/*
* Recover original instructions and breakpoints from relative jumps.
* Caller must call with locking kprobe_mutex.
*/
extern void arch_unoptimize_kprobes(struct list_head *oplist,
struct list_head *done_list)
{
struct optimized_kprobe *op, *tmp;
int c = 0;
list_for_each_entry_safe(op, tmp, oplist, list) {
/* Setup param */
setup_unoptimize_kprobe(&jump_poke_params[c],
jump_poke_bufs[c].buf, op);
list_move(&op->list, done_list);
if (++c >= MAX_OPTIMIZE_PROBES)
break;
}
/*
* text_poke_smp doesn't support NMI/MCE code modifying.
* However, since kprobes itself also doesn't support NMI/MCE
* code probing, it's not a problem.
*/
text_poke_smp_batch(jump_poke_params, c);
}
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
/* Replace a relative jump with a breakpoint (int3). */
void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
{
u8 buf[RELATIVEJUMP_SIZE];
/* Set int3 to first byte for kprobes */
buf[0] = BREAKPOINT_INSTRUCTION;
memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE);
}
static int __kprobes setup_detour_execution(struct kprobe *p,
struct pt_regs *regs,
int reenter)
{
struct optimized_kprobe *op;
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
/* This kprobe is really able to run optimized path. */
op = container_of(p, struct optimized_kprobe, kp);
/* Detour through copied instructions */
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
if (!reenter)
reset_current_kprobe();
preempt_enable_no_resched();
return 1;
}
return 0;
}
static int __kprobes init_poke_params(void)
{
/* Allocate code buffer and parameter array */
jump_poke_bufs = kmalloc(sizeof(struct jump_poke_buffer) *
MAX_OPTIMIZE_PROBES, GFP_KERNEL);
if (!jump_poke_bufs)
return -ENOMEM;
jump_poke_params = kmalloc(sizeof(struct text_poke_param) *
MAX_OPTIMIZE_PROBES, GFP_KERNEL);
if (!jump_poke_params) {
kfree(jump_poke_bufs);
jump_poke_bufs = NULL;
return -ENOMEM;
}
return 0;
}
#else /* !CONFIG_OPTPROBES */
static int __kprobes init_poke_params(void)
{
return 0;
}
kprobes/x86: Support kprobes jump optimization on x86 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 13:34:46 +00:00
#endif
int __init arch_init_kprobes(void)
{
return init_poke_params();
}
int __kprobes arch_trampoline_kprobe(struct kprobe *p)
{
return 0;
}