kernel-ark/net/mac80211/key.h

171 lines
4.7 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright 2002-2004, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
mac80211: clear crypto tx tailroom counter upon keys enable In case we got a fw restart while roaming from encrypted AP to non-encrypted one, we might end up with hitting a warning on the pending counter crypto_tx_tailroom_pending_dec having a non-zero value. The following comment taken from net/mac80211/key.c explains the rational for the delayed tailroom needed: /* * The reason for the delayed tailroom needed decrementing is to * make roaming faster: during roaming, all keys are first deleted * and then new keys are installed. The first new key causes the * crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes * the cost of synchronize_net() (which can be slow). Avoid this * by deferring the crypto_tx_tailroom_needed_cnt decrementing on * key removal for a while, so if we roam the value is larger than * zero and no 0->1 transition happens. * * The cost is that if the AP switching was from an AP with keys * to one without, we still allocate tailroom while it would no * longer be needed. However, in the typical (fast) roaming case * within an ESS this usually won't happen. */ The next flow lead to the warning eventually reported as a bug: 1. Disconnect from encrypted AP 2. Set crypto_tx_tailroom_pending_dec = 1 for the key 3. Schedule work 4. Reconnect to non-encrypted AP 5. Add a new key, setting the tailroom counter = 1 6. Got FW restart while pending counter is set ---> hit the warning While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into its single caller ieee80211_reenable_keys (previously called ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec and remove the counters warning as we just reset both. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-30 11:24:49 +00:00
* Copyright (C) 2019 Intel Corporation
*/
#ifndef IEEE80211_KEY_H
#define IEEE80211_KEY_H
#include <linux/types.h>
#include <linux/list.h>
#include <linux/crypto.h>
#include <linux/rcupdate.h>
#include <crypto/arc4.h>
#include <net/mac80211.h>
#define NUM_DEFAULT_KEYS 4
#define NUM_DEFAULT_MGMT_KEYS 2
#define NUM_DEFAULT_BEACON_KEYS 2
#define INVALID_PTK_KEYIDX 2 /* Keyidx always pointing to a NULL key for PTK */
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
struct ieee80211_local;
struct ieee80211_sub_if_data;
struct sta_info;
/**
* enum ieee80211_internal_key_flags - internal key flags
*
* @KEY_FLAG_UPLOADED_TO_HARDWARE: Indicates that this key is present
* in the hardware for TX crypto hardware acceleration.
* @KEY_FLAG_TAINTED: Key is tainted and packets should be dropped.
* @KEY_FLAG_CIPHER_SCHEME: This key is for a hardware cipher scheme
*/
enum ieee80211_internal_key_flags {
KEY_FLAG_UPLOADED_TO_HARDWARE = BIT(0),
KEY_FLAG_TAINTED = BIT(1),
KEY_FLAG_CIPHER_SCHEME = BIT(2),
};
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
enum ieee80211_internal_tkip_state {
TKIP_STATE_NOT_INIT,
TKIP_STATE_PHASE1_DONE,
TKIP_STATE_PHASE1_HW_UPLOADED,
};
struct tkip_ctx {
u16 p1k[5]; /* p1k cache */
u32 p1k_iv32; /* iv32 for which p1k computed */
enum ieee80211_internal_tkip_state state;
};
struct tkip_ctx_rx {
struct tkip_ctx ctx;
u32 iv32; /* current iv32 */
u16 iv16; /* current iv16 */
};
struct ieee80211_key {
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
/* for sdata list */
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
struct list_head list;
/* protected by key mutex */
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
unsigned int flags;
union {
struct {
/* protects tx context */
spinlock_t txlock;
/* last used TSC */
struct tkip_ctx tx;
/* last received RSC */
struct tkip_ctx_rx rx[IEEE80211_NUM_TIDS];
/* number of mic failures */
u32 mic_failures;
} tkip;
struct {
/*
* Last received packet number. The first
* IEEE80211_NUM_TIDS counters are used with Data
* frames and the last counter is used with Robust
* Management frames.
*/
u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
struct crypto_aead *tfm;
u32 replays; /* dot11RSNAStatsCCMPReplays */
} ccmp;
struct {
u8 rx_pn[IEEE80211_CMAC_PN_LEN];
struct crypto_shash *tfm;
u32 replays; /* dot11RSNAStatsCMACReplays */
u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
} aes_cmac;
struct {
u8 rx_pn[IEEE80211_GMAC_PN_LEN];
struct crypto_aead *tfm;
u32 replays; /* dot11RSNAStatsCMACReplays */
u32 icverrors; /* dot11RSNAStatsCMACICVErrors */
} aes_gmac;
struct {
/* Last received packet number. The first
* IEEE80211_NUM_TIDS counters are used with Data
* frames and the last counter is used with Robust
* Management frames.
*/
u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_GCMP_PN_LEN];
struct crypto_aead *tfm;
u32 replays; /* dot11RSNAStatsGCMPReplays */
} gcmp;
struct {
/* generic cipher scheme */
u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_MAX_PN_LEN];
} gen;
} u;
#ifdef CONFIG_MAC80211_DEBUGFS
struct {
struct dentry *stalink;
struct dentry *dir;
int cnt;
} debugfs;
#endif
/*
* key config, must be last because it contains key
* material as variable length member
*/
struct ieee80211_key_conf conf;
};
struct ieee80211_key *
ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
const u8 *key_data,
size_t seq_len, const u8 *seq,
const struct ieee80211_cipher_scheme *cs);
/*
* Insert a key into data structures (sdata, sta if necessary)
* to make it used, free old key. On failure, also free the new key.
*/
int ieee80211_key_link(struct ieee80211_key *key,
struct ieee80211_sub_if_data *sdata,
struct sta_info *sta);
int ieee80211_set_tx_key(struct ieee80211_key *key);
void ieee80211_key_free(struct ieee80211_key *key, bool delay_tailroom);
void ieee80211_key_free_unused(struct ieee80211_key *key);
void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx,
bool uni, bool multi);
void ieee80211_set_default_mgmt_key(struct ieee80211_sub_if_data *sdata,
int idx);
void ieee80211_set_default_beacon_key(struct ieee80211_sub_if_data *sdata,
int idx);
void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata,
bool force_synchronize);
void ieee80211_free_sta_keys(struct ieee80211_local *local,
struct sta_info *sta);
mac80211: clear crypto tx tailroom counter upon keys enable In case we got a fw restart while roaming from encrypted AP to non-encrypted one, we might end up with hitting a warning on the pending counter crypto_tx_tailroom_pending_dec having a non-zero value. The following comment taken from net/mac80211/key.c explains the rational for the delayed tailroom needed: /* * The reason for the delayed tailroom needed decrementing is to * make roaming faster: during roaming, all keys are first deleted * and then new keys are installed. The first new key causes the * crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes * the cost of synchronize_net() (which can be slow). Avoid this * by deferring the crypto_tx_tailroom_needed_cnt decrementing on * key removal for a while, so if we roam the value is larger than * zero and no 0->1 transition happens. * * The cost is that if the AP switching was from an AP with keys * to one without, we still allocate tailroom while it would no * longer be needed. However, in the typical (fast) roaming case * within an ESS this usually won't happen. */ The next flow lead to the warning eventually reported as a bug: 1. Disconnect from encrypted AP 2. Set crypto_tx_tailroom_pending_dec = 1 for the key 3. Schedule work 4. Reconnect to non-encrypted AP 5. Add a new key, setting the tailroom counter = 1 6. Got FW restart while pending counter is set ---> hit the warning While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into its single caller ieee80211_reenable_keys (previously called ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec and remove the counters warning as we just reset both. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-30 11:24:49 +00:00
void ieee80211_reenable_keys(struct ieee80211_sub_if_data *sdata);
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
#define key_mtx_dereference(local, ref) \
rcu_dereference_protected(ref, lockdep_is_held(&((local)->key_mtx)))
void ieee80211_delayed_tailroom_dec(struct work_struct *wk);
#endif /* IEEE80211_KEY_H */