davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0773d73d81
kernel-ark/drivers/pci/hotplug/pciehp.h

184 lines
6.0 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* PCI Express Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
[PATCH] PCI Hotplug: new contact info Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 22:16:10 +00:00
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
*/
#ifndef _PCIEHP_H
#define _PCIEHP_H
#include <linux/types.h>
#include <linux/pci.h>
PCI Hotplug: move pci_hotplug.h to include/linux/ This makes it possible to build pci hotplug drivers outside of the main kernel tree, and Sam keeps telling me to move local header files to their proper places... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-14 03:05:19 +00:00
#include <linux/pci_hotplug.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/delay.h>
[PATCH] fix more missing includes Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:05 +00:00
#include <linux/sched.h> /* signal_pending() */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/pcieport_if.h>
[PATCH] PCI hotplug: convert semaphores to mutex semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested with allyesconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 15:02:15 +00:00
#include <linux/mutex.h>
pciehp: update workqueue usage * Rename pciehp_wq to pciehp_ordered_wq and add non-ordered pciehp_wq which is used instead of the system workqueue. This is to remove the use of flush_scheduled_work() which is deprecated and scheduled for removal. * With cmwq in place, there's no point in creating workqueues lazily. Create both pciehp_wq and pciehp_ordered_wq upfront. * Include workqueue.h from pciehp.h. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18 06:31:02 +00:00
#include <linux/workqueue.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define MY_NAME "pciehp"
module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 23:02:20 +00:00
extern bool pciehp_poll_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int pciehp_poll_time;
module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 23:02:20 +00:00
extern bool pciehp_debug;
extern bool pciehp_force;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pciehp: cleanup pciehp.h This patch cleans up pciehp.h. This has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-22 01:01:07 +00:00
#define dbg(format, arg...) \
PCI: add missing KERN_* constants to printks According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing pieces here for the pci subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-06 09:23:36 +00:00
do { \
if (pciehp_debug) \
printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); \
} while (0)
pciehp: cleanup pciehp.h This patch cleans up pciehp.h. This has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-22 01:01:07 +00:00
#define err(format, arg...) \
printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
#define info(format, arg...) \
printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) \
printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PCI: pciehp: replace printk with dev_printk This patch replaces printks within pciehp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-09-05 03:11:26 +00:00
#define ctrl_dbg(ctrl, format, arg...) \
do { \
if (pciehp_debug) \
PCI: add missing KERN_* constants to printks According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing pieces here for the pci subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-06 09:23:36 +00:00
dev_printk(KERN_DEBUG, &ctrl->pcie->device, \
PCI: pciehp: replace printk with dev_printk This patch replaces printks within pciehp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-09-05 03:11:26 +00:00
format, ## arg); \
} while (0)
#define ctrl_err(ctrl, format, arg...) \
dev_err(&ctrl->pcie->device, format, ## arg)
#define ctrl_info(ctrl, format, arg...) \
dev_info(&ctrl->pcie->device, format, ## arg)
#define ctrl_warn(ctrl, format, arg...) \
dev_warn(&ctrl->pcie->device, format, ## arg)
pciehp: cleanup init_slot() This patch cleans up init_slots() in pciehp_core.c based on pcihp_skeleton.c. This has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-22 01:01:02 +00:00
#define SLOT_NAME_SIZE 10
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct slot {
u8 state;
struct controller *ctrl;
struct hotplug_slot *hotplug_slot;
pciehp: Event handling rework The event handler of PCIEHP driver is unnecessarily very complex. In addition, current event handler can only a fixed number of events at the same time, and some of events would be lost if several number of events happened at the same time. This patch simplify the event handler using 'work queue', and it also fix the above-mentioned issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-06 23:02:26 +00:00
struct delayed_work work; /* work for button event */
struct mutex lock;
PCI: pciehp: Use per-slot workqueues to avoid deadlock When we have a hotplug-capable PCIe port with a second hotplug-capable PCIe port below it, removing the device below the upstream port causes a deadlock. The deadlock happens because we use the pciehp_wq workqueue to run pciehp_power_thread(), which uses pciehp_disable_slot() to remove devices below the upstream port. When we remove the downstream PCIe port, we call pciehp_remove(), the pciehp driver's .remove() method. That calls flush_workqueue(pciehp_wq), which deadlocks because the pciehp_power_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every PCIe port and removing the single shared workqueue. Here's the call path that leads to the deadlock: pciehp_queue_pushbutton_work queue_work(pciehp_wq) # queue pciehp_power_thread ... pciehp_power_thread pciehp_disable_slot remove_board pciehp_unconfigure_device pci_stop_and_remove_bus_device ... pciehp_remove # pciehp driver .remove method pciehp_release_ctrl pcie_cleanup_slot flush_workqueue(pciehp_wq) This is fairly urgent because it can be caused by simply unplugging a Thunderbolt adapter, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2ssiRgcTD1bej2tkUUfsWmpL5eNtPcNif9va2-Gzb2u8nQ@mail.gmail.com Reported-and-tested-by: Daniel J Blueman <daniel@quora.org> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2013-01-11 02:15:54 +00:00
struct workqueue_struct *wq;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
struct event_info {
u32 event_type;
pciehp: Event handling rework The event handler of PCIEHP driver is unnecessarily very complex. In addition, current event handler can only a fixed number of events at the same time, and some of events would be lost if several number of events happened at the same time. This patch simplify the event handler using 'work queue', and it also fix the above-mentioned issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-06 23:02:26 +00:00
struct slot *p_slot;
struct work_struct work;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
struct controller {
pciehp - add missing locking This patch fixes the problem that system will panic if multiple power on/off operations are issued to the same slot in parallel. This problem can be easily reproduced by commands below. # while true; do echo 1 > power; echo 0 > power; done & # while true; do echo 1 > power; echo 0 > power; done & The cause is lack of locking for enable/disable operations. This patch fixes this problem. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-22 17:17:29 +00:00
struct mutex ctrl_lock; /* controller lock */
PCI: pciehp: fix irq initialization Current pciehp driver gets irq number from pci_dev->irq. But because pciehp driver is a pci express port service driver, it should get irq number from pcie_device->irq. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-08-22 08:16:48 +00:00
struct pcie_device *pcie; /* PCI Express port service */
PCI: pciehp: remove slot_list field Since PCIe downstream port has only one slot at most, we don't need 'slot_list' linked list to manage multiple slots under the port. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-15 08:24:46 +00:00
struct slot *slot;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wait_queue_head_t queue; /* sleep & wake process */
pciehp: Fix wrong slot capability check Current pciehp saves only 8bits of Slot Capability registers in ctrl->ctrlcap. But it refers more than 8bit for checking EMI capability. It is clearly a bug and EMI would never work. To fix this problem, this patch saves full Slot Capability contens in ctrl->slot_cap. It also reduce the redundant reads of Slot Capability register. And this pach also cleans up the macros to check the slot capabilitys (e.g. MRL_SENS(), and so on). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 21:39:06 +00:00
u32 slot_cap;
pciehp: remove unnecessary php_ctlr The struct php_ctlr seems to be only for complicating codes. This patch removes struct php_ctlr and related codes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-22 01:01:04 +00:00
struct timer_list poll_timer;
PCI: pciehp: make cmd_busy flag one bit The cmd_busy field in struct controller takes only two values 0 or 1. So it should be one bit. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-03 06:06:18 +00:00
unsigned int cmd_busy:1;
pciehp: fix slow probing Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. The command completed bit in Slot Status register applies only to commands issued to control the attention indicator, power indicator, power controller, or electromechanical interlock. However, writes to other parts of the Slot Control register would end up writing to the control fields. Hence, any write to Slot Control register is considered as a command. However, if the controller doesn't support any of attention indicator, power indicator, power controller and electromechanical interlock, command completed bit would not set in writing to Slot Control register. In this case, we should not wait for command completed bit set, otherwise all commands would be considered not completed in timeout seconds (1 sec.). The cause of the problem is pciehp driver didn't take this situation into account. This patch changes pciehp to take it into account. This patch also add the check for "No Command Completed Support" bit in Slot Capability register. If it is set, we should not wait for command completed bit set as well. This problem seems to be revealed by the commit c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that pciehp did not wait for command completed properly (pciehp just ignored the command completion event). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27 10:04:30 +00:00
unsigned int no_cmd_complete:1;
PCI hotplug: pciehp: poll data link layer link active This patch adds polling mechanism for Data Link Layer Link Active bit after turning power on, instead of waiting for 1000 msec. This reduces reduce the unnecessary long wait. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 05:31:44 +00:00
unsigned int link_active_reporting:1;
PCI: pciehp: Handle interrupts that happen during initialization. Move the enabling of interrupts after all of the data structures are setup so that we can safely run the interrupt handler as soon as it is registered. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-01-29 03:31:18 +00:00
unsigned int notification_enabled:1;
PCI: pciehp: enable software notification on empty slots Current pciehp disables software notification of adapter presence changed event and MRL changed event when slot is turned off. Because of this, there is no way to detect those events on empty slots in the current pciehp implementation. According to the past discussion(*), this behavior was introduced to prevent endless loop that could happen if pcie_isr() runs after power fault is detected on a certain platform whose stickey power-fault bit remains on till the slot is powered on again. (*) http://sourceforge.net/mailarchive/message.php?msg_id=20051130135409.A14918%40unix-os.sc.intel.com I think this endless loop can be avoided using one bit flag that indicates power fault had been detected, instead of disabling software notification of adapter present changed event and MRL changed event. With this patch, we can enable software notification mechanism of presence changed and MRL changed event on the empty slots again. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-03 06:06:16 +00:00
unsigned int power_fault_detected;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
#define INT_BUTTON_IGNORE 0
#define INT_PRESENCE_ON 1
#define INT_PRESENCE_OFF 2
#define INT_SWITCH_CLOSE 3
#define INT_SWITCH_OPEN 4
#define INT_POWER_FAULT 5
#define INT_POWER_FAULT_CLEAR 6
#define INT_BUTTON_PRESS 7
#define INT_BUTTON_RELEASE 8
#define INT_BUTTON_CANCEL 9
#define STATIC_STATE 0
#define BLINKINGON_STATE 1
#define BLINKINGOFF_STATE 2
#define POWERON_STATE 3
#define POWEROFF_STATE 4
PCI: pciehp: remove slot capabilities definitions Use generic PCIe slot capabilities register definitions instead of internal definitions. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-15 08:34:05 +00:00
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_ABP)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PCP)
#define MRL_SENS(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_MRLSP)
#define ATTN_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_AIP)
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PIP)
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_HPS)
#define EMI(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_EIP)
#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_NCCS)
PCI: pciehp: remove first_slot field The slot number can be calculated only by physical slot number field in the slot capabilities register. So the first_slot field in struct controller is meaningless and we don't need it. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-15 08:28:53 +00:00
#define PSN(ctrl) ((ctrl)->slot_cap >> 19)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 18:02:59 +00:00
int pciehp_sysfs_enable_slot(struct slot *slot);
int pciehp_sysfs_disable_slot(struct slot *slot);
u8 pciehp_handle_attention_button(struct slot *p_slot);
u8 pciehp_handle_switch_change(struct slot *p_slot);
u8 pciehp_handle_presence_change(struct slot *p_slot);
u8 pciehp_handle_power_fault(struct slot *p_slot);
int pciehp_configure_device(struct slot *p_slot);
int pciehp_unconfigure_device(struct slot *p_slot);
void pciehp_queue_pushbutton_work(struct work_struct *work);
pciehp: fix interrupt initialization Current pciehp driver's intialization sequence is as follows: (1) initialize controller data structure (2) install interrupt handler (3) enable software notification (4) initialize controller specific slot data structure (5) initialize generic slot data structure and register it to pci hotplug core The interrupt handler of pciehp assumes that controller specific slot data structure is already initialized. However, it is installed at (2) before initializing controller specific slot data structure at (4). Because of this, pciehp driver cannot handle the following cases properly. - If devices that shares IRQ with pciehp raise interrupts between (2) and (4). - If hotplug events (e.g. MRL open) happen between (3) and (4). We already have a workaround for this problem ("pciehp: fix NULL dereference in interrupt handler: dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08). But we still need fundamental fix. This patch fix the problem by changing the initilization sequence as follows: (1) initialize controller data structure (2) initialize controller specific slot data structure (3) install interrupt handler (4) enable software notification (5) initialize generic slot data structure and register it to pci hotplug core Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-20 03:07:08 +00:00
struct controller *pcie_init(struct pcie_device *dev);
PCI: pciehp: Handle interrupts that happen during initialization. Move the enabling of interrupts after all of the data structures are setup so that we can safely run the interrupt handler as soon as it is registered. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2009-01-29 03:31:18 +00:00
int pcie_init_notification(struct controller *ctrl);
PCIE: fix PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1. Fix pciehp_probe() to deal with ExpressCard cards that were inserted prior to the driver being loaded. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 23:11:28 +00:00
int pciehp_enable_slot(struct slot *p_slot);
PCIE: Make use of the previously split out pcie_init_enable_events() function Make use of the previously split out pcie_init_enable_events() function to reinitialize the hotplug hardware on resume from suspend, but only when pciehp_force==1. Otherwise behaviour is unmodified. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 23:12:00 +00:00
int pciehp_disable_slot(struct slot *p_slot);
pciehp: fix interrupt initialization Current pciehp driver's intialization sequence is as follows: (1) initialize controller data structure (2) install interrupt handler (3) enable software notification (4) initialize controller specific slot data structure (5) initialize generic slot data structure and register it to pci hotplug core The interrupt handler of pciehp assumes that controller specific slot data structure is already initialized. However, it is installed at (2) before initializing controller specific slot data structure at (4). Because of this, pciehp driver cannot handle the following cases properly. - If devices that shares IRQ with pciehp raise interrupts between (2) and (4). - If hotplug events (e.g. MRL open) happen between (3) and (4). We already have a workaround for this problem ("pciehp: fix NULL dereference in interrupt handler: dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08). But we still need fundamental fix. This patch fix the problem by changing the initilization sequence as follows: (1) initialize controller data structure (2) initialize controller specific slot data structure (3) install interrupt handler (4) enable software notification (5) initialize generic slot data structure and register it to pci hotplug core Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-20 03:07:08 +00:00
int pcie_enable_notification(struct controller *ctrl);
PCI: pciehp: remove hpc_ops The struct hpc_ops seems a set of hooks to controller specific routines. But, it is meaningless because no hotplug controller driver follows this framework. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-15 08:30:48 +00:00
int pciehp_power_on_slot(struct slot *slot);
int pciehp_power_off_slot(struct slot *slot);
int pciehp_get_power_status(struct slot *slot, u8 *status);
int pciehp_get_attention_status(struct slot *slot, u8 *status);
int pciehp_set_attention_status(struct slot *slot, u8 status);
int pciehp_get_latch_status(struct slot *slot, u8 *status);
int pciehp_get_adapter_status(struct slot *slot, u8 *status);
int pciehp_query_power_fault(struct slot *slot);
void pciehp_green_led_on(struct slot *slot);
void pciehp_green_led_off(struct slot *slot);
void pciehp_green_led_blink(struct slot *slot);
int pciehp_check_link_status(struct controller *ctrl);
void pciehp_release_ctrl(struct controller *ctrl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PCI: pciehp: remove 'name' parameter We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from pciehp's version of struct slot, and remove unused 'task_list' as well. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 23:41:38 +00:00
static inline const char *slot_name(struct slot *slot)
{
return hotplug_slot_name(slot->hotplug_slot);
}
[PATCH] PCI Hotplug: add common acpi functions to core shpchprm_acpi.c and pciehprm_acpi.c are nearly identical. In addition, there are functions in both these files that are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro. This patch also changes acpiphp to use the common hpp code. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-03 18:16:05 +00:00
#ifdef CONFIG_ACPI
pciehp: make pciehp build for powerpc Make pciehp build on powerpc Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-08 13:44:26 +00:00
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <linux/pci-acpi.h>
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 18:02:59 +00:00
void __init pciehp_acpi_slot_detection_init(void);
int pciehp_acpi_slot_detection_check(struct pci_dev *dev);
PCI: pciehp: add ACPI based slot detection There is a problem that some non hot-pluggable PCIe slots are detected as hot-pluggable by pciehp on some platforms. The immediate cause of this problem is that hot-plug capable bit in the Slot Capabilities register is set even for non hot-pluggable slots on those platforms. It seems a BIOS/hardware problem, but we need workaround about that. Some of those platforms define hot-pluggable PCIe slots on ACPI namespace properly, while hot-plug capable bit in the Slot Capabilities register is set improperly. So using ACPI namespace information in pciehp to detect PCIe hot-pluggable slots would be a workaround. This patch adds 'pciehp_detect_mode' module option. When 'acpi' is specified, pciehp uses ACPI namespace information to detect PCIe hot-pluggable slots. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-12-17 03:07:38 +00:00
static inline void pciehp_firmware_init(void)
{
pciehp_acpi_slot_detection_init();
}
[PATCH] PCI Hotplug: add common acpi functions to core shpchprm_acpi.c and pciehprm_acpi.c are nearly identical. In addition, there are functions in both these files that are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro. This patch also changes acpiphp to use the common hpp code. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-03 18:16:05 +00:00
#else
PCI: pciehp: add ACPI based slot detection There is a problem that some non hot-pluggable PCIe slots are detected as hot-pluggable by pciehp on some platforms. The immediate cause of this problem is that hot-plug capable bit in the Slot Capabilities register is set even for non hot-pluggable slots on those platforms. It seems a BIOS/hardware problem, but we need workaround about that. Some of those platforms define hot-pluggable PCIe slots on ACPI namespace properly, while hot-plug capable bit in the Slot Capabilities register is set improperly. So using ACPI namespace information in pciehp to detect PCIe hot-pluggable slots would be a workaround. This patch adds 'pciehp_detect_mode' module option. When 'acpi' is specified, pciehp uses ACPI namespace information to detect PCIe hot-pluggable slots. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-12-17 03:07:38 +00:00
#define pciehp_firmware_init() do {} while (0)
PCI hotplug: Fix build with CONFIG_ACPI unset One of the recent changes caused complilation of drivers/pci/hotplug/pciehp_core.c to fail. Fix this issue. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-25 19:33:29 +00:00
static inline int pciehp_acpi_slot_detection_check(struct pci_dev *dev)
{
return 0;
}
[PATCH] PCI Hotplug: add common acpi functions to core shpchprm_acpi.c and pciehprm_acpi.c are nearly identical. In addition, there are functions in both these files that are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro. This patch also changes acpiphp to use the common hpp code. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-03 18:16:05 +00:00
#endif /* CONFIG_ACPI */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* _PCIEHP_H */
Reference in New Issue Copy Permalink