IoT: Update F-30 for stable ostree branch

Signed-off-by: Peter Robinson <pbrobinson@fedoraproject.org>

README.md

@@ -1,15 +1,13 @@
 # fedora-kickstarts #
 
-This project is used to manage the Fedora kickstart files used in composing Fedora release images.
+This project is used to manage the Fedora kickstart files used in composing Fedora release images. 
 
-The master branch is used by rawhide and each release branch is used by that release.
+The master branch is used by rawhide and each release branch is used by that release. 
 
-All changes should be made via the PR workflow.
+All changes should be made via the PR workflow. 
 
-This project is packaged in Fedora as the spin-kickstarts package allowing users to see
-and modify the kickstart files for their local needs.
-
-Maintainers for each image are listed in the `maintainers.toml` file.
+This project is packaged in Fedora as the spin-kickstarts package allowing users to see 
+and modify the kickstart files for their local needs. 
 
 ## To make a release ##
 
@@ -26,18 +24,6 @@ Maintainers for each image are listed in the `maintainers.toml` file.
     # Clean up the generated files:
     make clean
 
-## Build logs ##
-
-To see build logs go to
-
-https://koji.fedoraproject.org/koji
-
-"Packages" tab, and filter by Fedora-Workstation-Live for example.
-
-Technical info about the officialy released images can be found at
-
-https://kojipkgs.fedoraproject.org/compose/
-
 # bug reports #
 
 Bugs should be reported to the spin-kickstarts bugzilla component:

custom/qa-test-day.ks

@@ -111,7 +111,7 @@ firefox
 
 # "EOF" is quoted so that variables are not expanded. Search for "here-document"
 # in man bash.
-cat >> /var/lib/livesys/livesys-session-extra << "EOF"
+cat >> /etc/rc.d/init.d/livesys << "EOF"
 
 # Create Test Day welcome screen
 # Note that shebang must be written this way, else it is considered as comment

fedora-arm-base.ks

@@ -0,0 +1,88 @@
+lang en_US.UTF-8
+#keyboard us
+auth --useshadow --passalgo=sha512
+selinux --enforcing
+firewall --enabled --service=mdns,ssh
+
+bootloader --location=mbr
+
+part /boot/efi --size=80 --fstype vfat --asprimary
+part /boot --size=512 --fstype ext4 --asprimary
+
+# make sure that initial-setup runs and lets us do all the configuration bits
+firstboot --reconfig
+
+services --enabled=sshd,NetworkManager,avahi-daemon,chronyd,initial-setup,zram-swap
+
+%include fedora-repo.ks
+
+%packages
+@core
+@standard
+@hardware-support
+zram
+
+kernel
+# remove this in %post
+dracut-config-generic
+-dracut-config-rescue
+# install tools needed to manage and boot arm systems
+@arm-tools
+-uboot-images-armv8
+rng-tools
+chrony
+extlinux-bootloader
+bcm283x-firmware
+initial-setup
+initial-setup-gui
+-iwl*
+-ipw*
+-usb_modeswitch
+#lets resize / on first boot
+# dracut-modules-growroot
+
+# make sure all the locales are available for inital0-setup and anaconda to work
+glibc-all-langpacks
+
+# this ks uses it in %post, and imgcreate also uses it in the installed
+# system root, so it needs to be there
+chkconfig
+
+%end
+
+%post
+
+# Setup Raspberry Pi firmware
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
+
+# work around for poor key import UI in PackageKit
+rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
+basearch=armhfp
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
+echo "Packages within this ARM disk image"
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
+# remove random seed, the newly installed instance should make it's own
+rm -f /var/lib/systemd/random-seed
+
+# Because memory is scarce resource in most arm systems we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+dnf -y remove dracut-config-generic
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network off
+
+# Remove machine-id on pre generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+%end
+

fedora-arm-kde.ks

@@ -0,0 +1,9 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-kde-common.ks
+
+part / --size=6300 --fstype ext4
+
+%post
+
+%end

fedora-arm-lxde.ks

@@ -0,0 +1,9 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-lxde-common.ks
+
+part / --size=4000 --fstype ext4
+
+%post
+
+%end

fedora-arm-lxqt.ks

@@ -0,0 +1,14 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-lxqt-common.ks
+
+part / --size=4400 --fstype ext4 --asprimary
+
+%packages
+# trojita not available on non-x86 platforms
+-trojita
+%end
+
+%post
+
+%end

fedora-arm-mate.ks

@@ -0,0 +1,9 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-mate-common.ks
+
+part / --size=7168 --fstype ext4
+
+%post
+
+%end

fedora-arm-minimal.ks

@@ -0,0 +1,8 @@
+%include fedora-arm-base.ks
+%include fedora-minimal-common.ks
+
+part / --size=1400 --fstype ext4
+
+%packages
+-xkeyboard-config
+%end

fedora-arm-python-classroom.ks

@@ -0,0 +1,8 @@
+# Maintained by the Fedora Python SIG:
+# http://fedoraproject.org/wiki/SIGs/Python
+# mailto:python-devel@lists.fedoraproject.org
+
+# The ARM Workstion based Python Classroom Lab
+
+%include fedora-arm-workstation.ks
+%include fedora-python-classroom-gnome-common.ks

fedora-arm-server.ks

@@ -0,0 +1,29 @@
+%include fedora-arm-base.ks
+
+# server defaults to xfs for / so lets do so on arm also
+part / --size=2500 --fstype xfs
+
+%packages
+# install the default groups for the server environment since installing the environment is not working
+@server-product
+@standard
+@headless-management
+@hardware-support
+@networkmanager-submodules
+
+@container-management
+@domain-client
+-initial-setup-gui
+-generic-release*
+%end
+
+%post
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+%end
+

fedora-arm-soas.ks

@@ -0,0 +1,9 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-soas-common.ks
+
+part / --size=3300 --fstype ext4 --asprimary
+
+%post
+
+%end

fedora-arm-workstation.ks

@@ -0,0 +1,17 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-workstation-common.ks
+
+part / --size=6200 --fstype ext4
+
+%packages
+-initial-setup
+-initial-setup-gui
+
+%end
+
+%post
+# Most of the ARM X accelerated drivers need some level of CMA allocation
+sed -i 's/\(append .*\)/\1 cma=256MB/' /boot/extlinux/extlinux.conf
+
+%end

fedora-arm-xbase.ks

@@ -0,0 +1,17 @@
+%packages
+@base-x
+@fonts
+@input-methods
+@multimedia
+@printing
+epiphany
+%end
+
+%post
+# Most of the ARM X accelerated drivers need some level of CMA allocation
+sed -i 's/\(append .*\)/\1 cma=192MB/' /boot/extlinux/extlinux.conf
+
+# Explicitly set graphical.target as default as this is how initial-setup detects which version to run
+ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target
+
+%end

fedora-arm-xfce.ks

@@ -0,0 +1,9 @@
+%include fedora-arm-base.ks
+%include fedora-arm-xbase.ks
+%include fedora-xfce-common.ks
+
+part / --size=4700 --fstype ext4
+
+%post
+
+%end

fedora-budgie-common.ks

@@ -1,23 +0,0 @@
-%packages
-fedora-release-budgie
-
-# Exclude unwanted groups that fedora-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Install budgie environment
-@^budgie-desktop-environment
-
-# recommended apps
-@budgie-desktop-apps
-@libreoffice
-libreoffice-draw
-libreoffice-math
-thunderbird
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end

fedora-cinnamon-common.ks

@@ -8,15 +8,12 @@
 
 %packages
 
-fedora-release-cinnamon
-
-# install env-group to resolve RhBug:1891500
-@^cinnamon-desktop-environment
-
+@networkmanager-submodules
+@cinnamon-desktop
 @libreoffice
-rhythmbox
+parole
 
 # extra backgrounds
-f36-backgrounds-extras-gnome
+f30-backgrounds-extras-gnome
 
 %end

fedora-cloud-atomic-pxetolive.ks

@@ -0,0 +1,36 @@
+# PXE-to-Live Atomic: PXE boot directly into a running Atomic Host
+# https://fedoraproject.org/wiki/Changes/AtomicHost
+
+lang en_US.UTF-8
+keyboard us
+timezone America/New_York
+zerombr
+clearpart --all --initlabel
+rootpw --lock --iscrypted locked
+user --name=none
+bootloader --timeout=1
+network --bootproto=dhcp --device=link --activate
+# We are only able to install atomic with separate /boot partition currently
+part / --fstype="ext4" --size=6000
+part /boot --size=500 --fstype="ext4"
+shutdown
+services --disabled=docker-storage-setup
+services --enabled=NetworkManager,sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
+ 
+ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/22/ --ref=fedora-atomic/f22/x86_64/docker-host
+ 
+%post
+
+# Ensure the root password is locked, we use cloud-init
+passwd -l root
+userdel -r none
+
+# We copy content of separate /boot partition to root part when building live squashfs image,
+# and we don't want systemd to try to mount it when pxe booting
+cat /dev/null > /etc/fstab
+
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network off
+
+%end

fedora-cloud-base-azure.ks

@@ -1,24 +0,0 @@
-# This is a basic Fedora cloud spin designed to work with Azure.
-
-# Inherit from cloud base
-%include fedora-cloud-base.ks
-
-%packages
-# Fedora Cloud Base includes the qemu guest agent and it is not
-# required for Azure: https://pagure.io/cloud-sig/issue/319
--qemu-guest-agent
-WALinuxAgent
-%end
-
-%post --erroronfail
-cat > /etc/ssh/sshd_config.d/50-client-alive-interval.conf << EOF
-ClientAliveInterval 120
-EOF
-
-cat >> /etc/chrony.conf << EOF
-
-# Azure's virtual time source:
-# https://docs.microsoft.com/en-us/azure/virtual-machines/linux/time-sync#check-for-ptp-clock-source
-refclock PHC /dev/ptp_hyperv poll 3 dpoll -2 offset 0
-EOF
-%end

fedora-cloud-base-gcp.ks

@@ -1,38 +0,0 @@
-# This is a basic Fedora cloud spin designed to work with GCP.
-# Note that GCP prefers UEFI so we'll need to make sure this image
-# is created from a machine that is started in UEFI mode.
-
-# Inherit from cloud base
-%include fedora-cloud-base.ks
-
-# Change serial port configuration to recommended default for GCP (ttyS0,38400n8d)
-# Don't show bootloader as it's impossible for the user to get to it in time
-# So we might as well not waste the 1 second on each boot.
-# https://cloud.google.com/compute/docs/import/import-existing-image
-bootloader --timeout=0 --location=mbr --append="no_timer_check net.ifnames=0 console=ttyS0,38400n8d"
-
-# redefine `services` here to drop cloud-init systemd unit enablements from
-# fedora-cloud-base.ks since we don't use them.
-services --enabled=sshd
-
-%packages
-# GCP provides its own guest environment.
-google-compute-engine-guest-configs
-# BZ 2193039: Ensure additional packages are present for ssh access management
-google-compute-engine-oslogin
-google-guest-agent
--cloud-init
-# Fedora Cloud Base includes the qemu guest agent. GCP prefers
-# that it not be installed  https://pagure.io/cloud-sig/issue/319
--qemu-guest-agent
-%end
-
-%post --erroronfail
-cat <<EOF > /etc/NetworkManager/conf.d/gcp-mtu.conf
-# In GCP it is recommended to use 1460 as the MTU.
-# Set it to 1460 for all connections.
-# https://cloud.google.com/network-connectivity/docs/vpn/concepts/mtu-considerations
-[connection]
-ethernet.mtu = 1460
-EOF
-%end

fedora-cloud-base-vagrant.ks

@@ -19,7 +19,7 @@ rootpw vagrant
 # even on VirtualBox virt, we get a primary network device with "eth0" as the name
 # This simplifies things and allows a single disk image for both supported Vagrant
 # platforms (virtualbox and kvm)
-bootloader --timeout=1 --location=mbr --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0"
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0"
 
 %packages
 # The default koji Vagrantfile configuration uses rsync to sync files between
@@ -53,12 +53,6 @@ EOKEYS
 chmod 600 ~vagrant/.ssh/authorized_keys
 chown -R vagrant:vagrant ~vagrant/.ssh/
 
-cat > /etc/ssh/sshd_config.d/10-vagrant-insecure-rsa-key.conf <<EOF
-# For now the vagrant insecure key is an rsa key
-# https://github.com/hashicorp/vagrant/issues/11783
-PubkeyAcceptedKeyTypes=+ssh-rsa
-EOF
-
 # Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
 mkdir -m 0700 -p /root/.ssh
 cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys

fedora-cloud-base.ks

@@ -4,6 +4,9 @@
 # keys. Cloud-init creates a user account named "fedora" with passwordless
 # sudo access. The root password is empty and locked by default.
 #
+# Note that unlike the standard Fedora install, this image has /tmp on disk
+# rather than in tmpfs, since memory is usually at a premium.
+#
 # This kickstart file is designed to be used with ImageFactory (in Koji).
 #
 # To do a local build, you'll need to install ImageFactory.  See
@@ -26,133 +29,237 @@ lang en_US.UTF-8
 keyboard us
 timezone --utc Etc/UTC
 
+auth --useshadow --passalgo=sha512
 selinux --enforcing
 rootpw --lock --iscrypted locked
 
 firewall --disabled
 
 # We pass net.ifnames=0 because we always want to use eth0 here on all the cloud images.
-bootloader --timeout=1 --location=mbr --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
+bootloader --timeout=1 --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
 
+network --bootproto=dhcp --device=link --activate --onboot=on
 services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
 
-# Configure for gpt with bios+uefi
-clearpart --all --initlabel --disklabel=gpt
-part prepboot  --size=4    --fstype=prepboot
-part biosboot  --size=1    --fstype=biosboot
-part /boot/efi --size=100  --fstype=efi
-part /boot     --size=1000  --fstype=ext4 --label=boot
-part btrfs.007 --size=2000 --fstype=btrfs --grow
-btrfs none --label=fedora btrfs.007
-btrfs /home --subvol --name=home LABEL=fedora
-btrfs /     --subvol --name=root LABEL=fedora
+zerombr
+clearpart --all
+autopart --noboot --nohome --noswap --nolvm
 
 %include fedora-repo.ks
 
 reboot
 
-##### begin package list #############################################
-%packages --instLangs=en
+# Package list.
+# FIXME: instLangs does not work, so there's a hack below
+# (see https://bugzilla.redhat.com/show_bug.cgi?id=1051816)
+# FIXME: instLangs bug has been fixed but now having instLangs
+# with an arg causes no langs to get installed because of BZ1262040
+# which yields the errors in BZ1261249. For now fix by not using
+# --instLangs at all
+#%packages --instLangs=en
+%packages
 
-# Include packages for the cloud-server-environment group
-@^cloud-server-environment
-
-# Install the tracer dnf plugin to enable automatic reboots
-# IF the user requests package updates
-# AND requests a reboot
-# AND the packages updated require a reboot.
-# https://fedoraproject.org/wiki/Changes/Automatic_Cloud_Reboot_On_Updates
-python3-dnf-plugin-tracer
-
-# Don't include the kernel toplevel package since it pulls in
-# kernel-modules. We're happy for now with kernel-core.
--kernel
 kernel-core
+@^cloud-server-environment
+# Need to pull in the udev subpackage
+systemd-udev
 
-# Don't include dracut-config-rescue. It will have dracut generate a
-# "rescue" entry in the grub menu, but that also means there is a
-# rescue kernel and initramfs that get created, which (currently) add
-# about another 40MiB to the /boot/ partition. Also the "rescue" mode
-# is generally not useful in the cloud.
+# after move away from grub2 - let's add 'which' back
+which
+
+# rescue mode generally isn't useful in the cloud context
 -dracut-config-rescue
 
-# Plymouth provides a graphical boot animation. In the cloud we don't
-# need a graphical boot animation. This also means anaconda won't put
-# rhgb/quiet on kernel command line
+# Some things from @core we can do without in a minimal install
+-biosdevname
+# Need to also add back plymouth in order to mask failure of
+# systemd-vconsole-setup.service. BZ#1272684. Comment out for now
+#-plymouth
+-iprutils
+# Now that BZ#1199868 is fixed kbd really gets removed but it breaks
+# systemd-vconsole-setup.service on boot. Comment out for now
+#-kbd
+-uboot-tools
+-kernel
+# No need for plymouth. Also means anaconda won't put rhgb/quiet
+# on kernel command line
 -plymouth
 
-# Install qemu-guest-agent https://pagure.io/cloud-sig/issue/319 To
-# improve the integration with OpenStack and other VM management
-# systems (oVirt, KubeVirt).
-qemu-guest-agent
-
-
-# No need for firewalld for now. We don't have a firewall on by default.
--firewalld
-
-# Don't include the geolite2 databases, which end up with 66MiB
-# in /usr/share/GeoIP
--geolite2-country
--geolite2-city
 %end
-##### end package list ###############################################
 
 
-##### begin kickstart post ###########################################
+
 %post --erroronfail
 
-if [ "$(arch)" = "x86_64" ]; then
-# Set up legacy BIOS boot if we booted from UEFI
-grub2-install --target=i386-pc /dev/vda
-fi
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
 
-# Blivet sets pmbr_boot flag erroneously and we need to purge it
-# otherwise it'll fail to boot
-parted /dev/vda disk_set pmbr_boot off
 
-# linux-firmware is installed by default and is quite large. As of mid 2020:
-#   Total download size: 97 M
-#   Installed size: 268 M
-# So far we've been fine shipping without it so let's continue.
-# More discussion about this in #1234504.
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+# Commenting out the following for #1234504
+# rpm works just fine for removing this, no idea why dnf can't cope
 echo "Removing linux-firmware package."
 rpm -e linux-firmware
 
-# See the systemd-random-seed.service man page that says:
-#   " It is recommended to remove the random seed from OS images intended
-#     for replication on multiple systems"
+# Remove firewalld; was supposed to be optional in F18+, but is pulled in
+# in install/image building.
+echo "Removing firewalld."
+# FIXME! clean_requirements_on_remove is the default with DNF, but may
+# not work when package was installed by Anaconda instead of command line.
+# Also -- check if this is still even needed with new anaconda -- disabled
+# firewall should _not_ pull in this package.
+# dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
+dnf -C -y erase "firewalld*"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+dnf -C -y erase authconfig
+
+# instlang hack. (Note! See bug referenced above package list)
+find /usr/share/locale -mindepth  1 -maxdepth 1 -type d -not -name en_US -exec rm -rf {} +
+localedef --list-archive | grep -v ^en_US | xargs localedef --delete-from-archive
+# this will kill a live system (since it's memory mapped) but should be safe offline
+mv -f /usr/lib/locale/locale-archive /usr/lib/locale/locale-archive.tmpl
+build-locale-archive
+echo '%_install_langs C:en:en_US:en_US.UTF-8' >> /etc/rpm/macros.image-language-conf
+
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+DEVTIMEOUT=10
+EOF
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+# Because memory is scarce resource in most cloud/virt environments,
+# and because this impedes forensics, we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# Uncomment this if you want to use cloud init but suppress the creation
+# of an "ec2-user" account. This will, in the absence of further config,
+# cause the ssh key from a metadata source to be put in the root account.
+#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
+#users: []
+#disable_root: 0
+#EOF
+
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed
 
+echo "Cleaning old dnf repodata."
+# FIXME: clear history?
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
+truncate -c -s 0 /var/log/dnf.rpm.log
+
 echo "Import RPM GPG key"
-releasever=$(rpm --eval '%{fedora}')
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
 basearch=$(uname -i)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 
+echo "Packages within this cloud image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+# FIXME: is this still needed?
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+# ignore return code because UEFI systems with vfat filesystems
+# that don't support selinux will give us errors
+/usr/sbin/fixfiles -R -a restore || true
+
 echo "Zeroing out empty space."
-# Create zeros file with nodatacow and no compression
-touch /var/tmp/zeros
-chattr +C /var/tmp/zeros
 # This forces the filesystem to reclaim space from deleted files
 dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-echo "(Don't worry -- that out-of-space error was expected.)"
-# Force sync to disk (Cf. https://pagure.io/cloud-sig/issue/340#comment-743430)
-btrfs filesystem sync /
 rm -f /var/tmp/zeros
-btrfs filesystem sync /
+echo "(Don't worry -- that out-of-space error was expected.)"
 
-# When we build the image a networking config file gets left behind.
-# Let's clean it up.
-echo "Cleanup leftover networking configuration"
-rm -f /etc/NetworkManager/system-connections/*.nmconnection
+# When we build the image with oz, dracut is used
+# and sets up a ifcfg-en<whatever> for the device. We don't
+# want to use this, we use eth0 so it is always the same.
+# So we remove all these ifcfg-en<whatever> devices so
+# The 'network' service can come up cleanly.
+rm -f /etc/sysconfig/network-scripts/ifcfg-en*
 
-# Truncate the /etc/resolv.conf left over from NetworkManager during the
-# kickstart. This causes delays in boot with cloud-init because the
-# 192.168.122.1 DNS server cannot be reached.
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+# Remove machine-id on pre generated images
+rm -f /etc/machine-id
+touch /etc/machine-id
+
+# Anaconda is writing an /etc/resolv.conf from the install environment.
+# The system should start out with an empty file, otherwise cloud-init
+# will try to use this information and may error:
+# https://bugs.launchpad.net/cloud-init/+bug/1670052
 truncate -s 0 /etc/resolv.conf
 
-# Clear machine-id on pre generated images
-truncate -s 0 /etc/machine-id
-
 %end
-##### end kickstart post ############################################
+

fedora-cloud-bigdata.ks

@@ -0,0 +1,221 @@
+# This is a Fedora 21 spin designed based on the Fedora Cloud Base Image
+# but tailored specifically for Big Data processing out-of-the-box.
+# Primarily, it builds on that image but adds extra packages, but over
+# time may have additional focus.
+#
+# It's configured with cloud-init so it will take advantage of
+# ec2-compatible metadata services for provisioning ssh keys. Cloud-init
+# creates a user account named "fedora" with passwordless sudo access. The
+# root password is empty and locked by default.
+#
+# Note that unlike the standard F20 install, this image has /tmp on disk
+# rather than in tmpfs, since memory is usually at a premium.
+
+text
+lang en_US.UTF-8
+keyboard us
+timezone --utc Etc/UTC
+
+auth --useshadow --passalgo=sha512
+selinux --enforcing
+rootpw --lock --iscrypted locked
+user --name=none
+
+firewall --disabled
+
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
+
+network --bootproto=dhcp --device=eth0 --activate --onboot=on
+services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
+
+zerombr
+clearpart --all
+part / --size 3000 --fstype ext4
+
+%include fedora-repo.ks
+
+
+reboot
+
+# Package list.
+%packages
+
+fedora-release-cloud
+
+kernel-core
+@core
+@cloud-server
+
+# Needed initially, but removed below.
+firewalld
+
+# rescue mode generally isn't useful in the cloud context
+-dracut-config-rescue
+
+# Some things from @core we can do without in a minimal install
+-biosdevname
+-plymouth
+-NetworkManager
+-iprutils
+-kbd
+-uboot-tools
+-kernel
+-grub2
+
+%end
+
+
+
+%post --erroronfail
+
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+
+
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+# remove the user anaconda forces us to make
+userdel -r none
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+# Commenting out the following for #1234504
+# rpm works just fine for removing this, no idea why dnf can't cope
+echo "Removing linux-firmware package."
+rpm -e linux-firmware
+
+# Remove firewalld; was supposed to be optional in F18+, but is required to
+# be present for install/image building.
+echo "Removing firewalld."
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+# Because memory is scarce resource in most cloud/virt environments,
+# and because this impedes forensics, we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# Uncomment this if you want to use cloud init but suppress the creation
+# of an "ec2-user" account. This will, in the absence of further config,
+# cause the ssh key from a metadata source to be put in the root account.
+#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
+#users: []
+#disable_root: 0
+#EOF
+
+echo "Removing random-seed so it's not the same in every image."
+rm -f /var/lib/systemd/random-seed
+
+echo "Cleaning old dnf repodata."
+dnf history new
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
+
+echo "Import RPM GPG key"
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
+
+echo "Packages within this cloud image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+# This is a temporary workaround for
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
+# where sfdisk seems to be messing up the mbr.
+# Long-term fix is to address this in anaconda directly and remove this.
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
+dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
+
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/dnf
+/usr/sbin/fixfiles -R -a restore
+
+echo "Zeroing out empty space."
+# This forces the filesystem to reclaim space from deleted files
+dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
+rm -f /var/tmp/zeros
+echo "(Don't worry -- that out-of-space error was expected.)"
+
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+%end
+

fedora-cloud-experimental.ks

@@ -0,0 +1,215 @@
+# This is a spin of the Fedora cloud image designed for trying out new
+# images in rawhide. It won't be built for non-rawhide trees, let alone
+# actual releases.
+
+cmdline
+lang en_US.UTF-8
+keyboard us
+timezone --utc Etc/UTC
+
+auth --useshadow --passalgo=sha512
+selinux --enforcing
+rootpw --lock --iscrypted locked
+user --name=none
+
+firewall --disabled
+
+bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
+
+network --bootproto=dhcp --device=eth0 --activate --onboot=on
+services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
+
+zerombr
+clearpart --all
+part / --size 3000 --fstype ext4
+
+%include fedora-repo.ks
+
+
+reboot
+
+# Package list.
+%packages --excludedocs --instLangs=en_US
+
+fedora-release-cloud
+
+kernel-core
+@core
+@cloud-server
+
+# rescue mode generally isn't useful in the cloud context
+-dracut-config-rescue
+
+# Needed initially, but removed below.
+firewalld
+
+# Some things from @core we can do without in a minimal install
+-biosdevname
+-plymouth
+-NetworkManager
+-iprutils
+-kbd
+-uboot-tools
+-kernel
+-grub2
+
+%end
+
+
+
+%post --erroronfail
+
+# Create grub.conf for EC2. This used to be done by appliance creator but
+# anaconda doesn't do it. And, in case appliance-creator is used, we're
+# overriding it here so that both cases get the exact same file.
+# Note that the console line is different -- that's because EC2 provides
+# different virtual hardware, and this is a convenient way to act differently
+echo -n "Creating grub.conf for pvgrub"
+rootuuid=$( awk '$2=="/" { print $1 };'  /etc/fstab )
+mkdir /boot/grub
+echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
+for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-//  ); do
+  echo "title Fedora ($kv)" >> /boot/grub/grub.conf
+  echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
+  echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
+  echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
+  echo
+done
+
+
+#link grub.conf to menu.lst for ec2 to work
+echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
+ln -sf grub.conf /boot/grub/menu.lst
+ln -sf /boot/grub/grub.conf /etc/grub.conf
+
+# older versions of livecd-tools do not follow "rootpw --lock" line above
+# https://bugzilla.redhat.com/show_bug.cgi?id=964299
+passwd -l root
+# remove the user anaconda forces us to make
+userdel -r none
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+# this is installed by default but we don't need it in virt
+# Commenting out the following for #1234504
+# rpm works just fine for removing this, no idea why dnf can't cope
+echo "Removing linux-firmware package."
+rpm -e linux-firmware
+
+# Remove firewalld; was supposed to be optional in F18+, but is required to
+# be present for install/image building.
+echo "Removing firewalld."
+dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
+
+# Another one needed at install time but not after that, and it pulls
+# in some unneeded deps (like, newt and slang)
+echo "Removing authconfig."
+dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
+
+echo -n "Getty fixes"
+# although we want console output going to the serial console, we don't
+# actually have the opportunity to login there. FIX.
+# we don't really need to auto-spawn _any_ gettys.
+sed -i '/^#NAutoVTs=.*/ a\
+NAutoVTs=0' /etc/systemd/logind.conf
+
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
+# For cloud images, 'eth0' _is_ the predictable device name, since
+# we don't want to be tied to specific virtual (!) hardware
+rm -f /etc/udev/rules.d/70*
+ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
+
+# simple eth0 config, again not hard-coded to the build hardware
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
+
+# generic localhost names
+cat > /etc/hosts << EOF
+127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+
+EOF
+echo .
+
+
+# Because memory is scarce resource in most cloud/virt environments,
+# and because this impedes forensics, we are differing from the Fedora
+# default of having /tmp on tmpfs.
+echo "Disabling tmpfs for /tmp."
+systemctl mask tmp.mount
+
+# make sure firstboot doesn't start
+echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
+
+# Uncomment this if you want to use cloud init but suppress the creation
+# of an "ec2-user" account. This will, in the absence of further config,
+# cause the ssh key from a metadata source to be put in the root account.
+#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
+#users: []
+#disable_root: 0
+#EOF
+
+echo "Removing random-seed so it's not the same in every image."
+rm -f /var/lib/systemd/random-seed
+
+echo "Cleaning old dnf repodata."
+dnf history new
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
+
+echo "Import RPM GPG key"
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
+
+echo "Packages within this cloud image:"
+echo "-----------------------------------------------------------------------"
+rpm -qa
+echo "-----------------------------------------------------------------------"
+# Note that running rpm recreates the rpm db files which aren't needed/wanted
+rm -f /var/lib/rpm/__db*
+
+
+# This is a temporary workaround for
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
+# where sfdisk seems to be messing up the mbr.
+# Long-term fix is to address this in anaconda directly and remove this.
+# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
+dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
+
+
+echo "Fixing SELinux contexts."
+touch /var/log/cron
+touch /var/log/boot.log
+mkdir -p /var/cache/dnf
+chattr -i /boot/extlinux/ldlinux.sys
+/usr/sbin/fixfiles -R -a restore
+chattr +i /boot/extlinux/ldlinux.sys
+
+echo "Zeroing out empty space."
+# This forces the filesystem to reclaim space from deleted files
+dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
+rm -f /var/tmp/zeros
+echo "(Don't worry -- that out-of-space error was expected.)"
+
+# Enable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network on
+
+%end
+

fedora-comp-neuro-common.ks

@@ -1,29 +0,0 @@
-# Description: Packages for the NeuroFedora computational neuroscience lab image.
-#
-# Maintained by the NeuroFedora SIG:
-# https://neuro.fedoraproject.org
-# mailto:neuro-sig@lists.fedoraproject.org
-
-%packages
-fedora-release-compneuro
-# Includes numpy, scipy, jupyter, pandas, scikit, scipy, statsmodels, sympy, matplotlib
-@python-science
-
-#Computational neuroscience packages
-arbor
-genesis-simulator
-moose
-nest
-neuron
-neuron-devel
-python3
-python3-brian2
-python3-ipython
-python3-lfpy
-python3-nest
-python3-netpyne
-python3-neuron
-python3-pynn
-python3-steps
-
-%end

fedora-container-base.ks

@@ -3,15 +3,18 @@
 
 %include fedora-container-common.ks
 
-%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
+%packages --excludedocs --instLangs=en --nocore
 rootfiles
+# https://communityblog.fedoraproject.org/modularity-dead-long-live-modularity/
+fedora-repos-modular
 tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
 vim-minimal
 dnf
 dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
+sssd-client
 sudo
 -glibc-langpack-en
--langpacks-en
+-cracklib-dicts
 %end
 
 %post --erroronfail --log=/root/anaconda-post.log
@@ -22,6 +25,11 @@ rm -rf /tmp/*
 # https://pagure.io/atomic-wg/issue/308
 printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
 
+# https://bugzilla.redhat.com/show_bug.cgi?id=1576993
+systemctl disable dnf-makecache.timer
+
+#Mask mount units and getty service so that we don't get login prompt
+systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
 
 # https://bugzilla.redhat.com/show_bug.cgi?id=1343138
 # Fix /run/lock breakage since it's not tmpfs in docker
@@ -35,10 +43,8 @@ printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
 #   [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
 #
 umount /run
-rm -f /run/nologin # https://pagure.io/atomic-wg/issue/316
-
-# Final pruning
-rm -rfv /var/cache/* /var/log/* /tmp/*
+systemd-tmpfiles --prefix=/run/ --prefix=/var/run/ --create --boot || true
+rm /run/nologin # https://pagure.io/atomic-wg/issue/316
 
 %end
 

fedora-container-common.ks

@@ -18,8 +18,7 @@
 
 text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
 bootloader --disabled
-timezone --isUtc Etc/UTC
-timesource --ntp-disable
+timezone --isUtc --nontp Etc/UTC
 rootpw --lock --iscrypted locked
 keyboard us
 network --bootproto=dhcp --device=link --activate --onboot=on
@@ -30,13 +29,16 @@ zerombr
 clearpart --all
 autopart --noboot --nohome --noswap --nolvm
 
-%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
+%packages --excludedocs --instLangs=en --nocore
 fedora-release-container
 bash
 coreutils
 glibc-minimal-langpack
+libcrypt
 rpm
-util-linux-core
+shadow-utils
+sssd-client
+util-linux
 -kernel
 -dosfstools
 -e2fsprogs
@@ -48,10 +50,6 @@ util-linux-core
 -trousers
 -xkeyboard-config
 -grubby
--langpacks-en_GB
-# https://bugzilla.redhat.com/show_bug.cgi?id=1951111
--util-linux
--sssd-client
 
 %end
 
@@ -68,13 +66,7 @@ echo 'LANG="C.UTF-8"' >  /etc/locale.conf
 
 # https://bugzilla.redhat.com/show_bug.cgi?id=1400682
 echo "Import RPM GPG key"
-releasever=$(rpm --eval '%{?fedora}')
-
-# When building ELN containers, we don't have the %{fedora} macro
-if [ -z $releasever ]; then
-  releasever=eln
-fi
-
+releasever=$(rpm -q --qf '%{version}\n' fedora-release-container)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 
 echo "# fstab intentionally empty for containers" > /etc/fstab
@@ -83,6 +75,4 @@ echo "# fstab intentionally empty for containers" > /etc/fstab
 rm -f /etc/machine-id
 touch /etc/machine-id
 
-echo "# resolv placeholder" > /etc/resolv.conf
-chmod 644 /etc/resolv.conf
 %end

fedora-container-toolbox.ks

@@ -1,152 +0,0 @@
-# Kickstart file for Fedora Toolbox
-
-# See fedora-container-common.ks for details on how to hack on container image kickstarts
-# This base is a standard Fedora image with python3 and dnf
-
-%include fedora-container-common.ks
-
-# Install packages
-%packages --inst-langs=en --nocore --exclude-weakdeps
-acl
-bash
-bash-completion
-bc
-bzip2
-coreutils-common
-curl
-diffutils
-dnf
-dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
-dnf-plugins-core
-findutils
-flatpak-spawn
-fpaste
-gawk
-git
--glibc-minimal-langpack
-glibc-all-langpacks
-gnupg2
-gnupg2-smime
-grep
-gvfs-client
-gzip
-hostname
-iproute
-iputils
-keyutils
-krb5-libs
-less
-libcap
-lsof
-man-db
-man-pages
-mesa-dri-drivers
-mesa-vulkan-drivers
-mtr
-nano-default-editor
-nss-mdns
-openssh-clients
-openssl
-p11-kit
-pam
-passwd
-pigz
-procps-ng
-python3
-rootfiles
-rpm
-rsync
-sed
-shadow-utils
-sudo
-systemd
-tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
-tcpdump
-time
-traceroute
-tree
-unzip
-util-linux
-util-linux-core
-vim-enhanced
-vte-profile
-vulkan-loader
-wget
-which
-whois
-words
-xorg-x11-xauth
-xz
-zip
-%end
-
-# Pre-installation commands
-%pre
-# Copy README.md
-cp /README.md /mnt/sysimage/README.md
-
-# Remove macros.image-language-conf file
-rm -f /mnt/sysimage/etc/rpm/macros.image-language-conf
-
-# Remove 'tsflags=nodocs' line from dnf.conf
-sed -i '/tsflags=nodocs/d' /mnt/sysimage/etc/dnf/dnf.conf
-
-# https://bugzilla.redhat.com/show_bug.cgi?id=1343138
-# Fix /run/lock breakage since it's not tmpfs in docker
-# This unmounts /run (tmpfs) and then recreates the files
-# in the /run directory on the root filesystem of the container
-#
-# We ignore the return code of the systemd-tmpfiles command because
-# at this point we have already removed the /etc/machine-id and all
-# tmpfiles lines with %m in them will fail and cause a bad return
-# code. Example failure:
-#   [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
-#
-umount /run
-rm -f /run/nologin # https://pagure.io/atomic-wg/issue/316
-
-# Final pruning
-rm -rfv /var/cache/* /var/log/* /tmp/*
-
-%end
-
-# Perform any necessary post-installation configurations specific to Fedora Toolbox (nochroot environment)
-# Post-installation commands
-
-%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
-set -eux
-
-# Check if specified files exist
-#declare -a files=(
-#  "/usr/share/man/man1/bash.1*"
-#  "/usr/share/man/man1/cd.1*"
-#  "/usr/share/man/man1/export.1*"
-#  "/usr/share/man/man1/cat.1*"
-#  "/usr/share/man/man1/cp.1*"
-#  "/usr/share/man/man1/ls.1*"
-#  "/usr/share/man/man1/gpg2.1*"
-#  "/usr/share/man/man7/gnupg2.7*"
-#  "/usr/share/man/fr/man8/rpm.8*"
-#  "/usr/share/man/ja/man8/rpm.8*"
-#  "/usr/share/man/man8/rpm.8*"
-#  "/usr/share/man/man1/kill.1*"
-#  "/usr/share/man/man8/mount.8*"
-#)
-
-#ret_val=0
-#for file in "${files[@]}"; do
-#  if ! compgen -G "$file" >/dev/null; then
-#    echo "$file: No such file or directory" >&2
-#    ret_val=1
-#    break
-#  fi
-#done
-
-#if [ "$ret_val" -ne 0 ]; then
-#  false
-#fi
-
-# Clean up dnf cache
-dnf clean all
-
-%end

fedora-design-suite-common.ks

@@ -1,30 +0,0 @@
-%packages
-# Switch to groups for design suite
-@design-suite
-
-# Identify as Fedora Design Suite
-fedora-release-designsuite
-
-# Provides backup application
-deja-dup
-#deja-dup-nautilus
-
-# Add extra gnome applications
-#gnome-books
-gnome-calendar
-gnome-photos
-gnome-pomodoro
-gnome-todo
-
-# Add cosmetic for terminal
-powerline
-powerline-fonts
-
-# removal of unneeded applications
--gnome-boxes
-
-# temporarily removing conflicting application
--mypaint
--sparkleshare
-
-%end

fedora-disk-base.ks

@@ -11,9 +11,10 @@ text
 lang en_US.UTF-8
 keyboard us
 timezone US/Eastern
+auth --useshadow --passalgo=sha512
 selinux --enforcing
 firewall --enabled --service=mdns
-services --enabled=sshd,NetworkManager,chronyd
+services --enabled=sshd,NetworkManager,chronyd,zram-swap
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -32,6 +33,7 @@ firstboot --reconfig
 @core
 @standard
 @hardware-support
+zram
 
 kernel
 # remove this in %post
@@ -39,6 +41,8 @@ dracut-config-generic
 -dracut-config-rescue
 # install tools needed to manage and boot arm systems
 @arm-tools
+-uboot-images-armv7
+rng-tools
 chrony
 bcm283x-firmware
 initial-setup
@@ -48,46 +52,37 @@ initial-setup
 -usb_modeswitch
 -generic-release*
 
-# make sure all the locales are available for inital-setup and anaconda to work
+# make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks
 
 %end
 
 %post
 
-# Find the architecture we are on
-arch=$(uname -m)
 # Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]]; then
-cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
-fi
+cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
-releasever=$(rpm --eval '%{fedora}')
+releasever=$(rpm -q --qf '%{version}\n' fedora-release)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 echo "Packages within this disk image"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
 
 # remove random seed, the newly installed instance should make it's own
 rm -f /var/lib/systemd/random-seed
 
 # The enp1s0 interface is a left over from the imagefactory install, clean this up
-rm -f /etc/NetworkManager/system-connections/*.nmconnection
+rm -f /etc/sysconfig/network-scripts/ifcfg-enp1s0
 
 dnf -y remove dracut-config-generic
 
+# Disable network service here, as doing it in the services line
+# fails due to RHBZ #1369794
+/sbin/chkconfig network off
+
 # Remove machine-id on pre generated images
 rm -f /etc/machine-id
 touch /etc/machine-id
 
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# Anaconda adds console=tty0 to the grub boot line on all images. this is problematic
-# when you are using fedora via serial console as you do not get any output post grub
-# linux does a good job of knowing what consoles need to be enabled.
-# https://bugzilla.redhat.com/show_bug.cgi?id=2022757
-if [[ $arch == "aarch64" ]]; then
-sed -i -e 's|console=tty0||g' /boot/loader/entries/*conf
-fi
-
 %end

fedora-disk-budgie.ks

@@ -1,5 +0,0 @@
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-budgie-common.ks
-
-autopart --type=btrfs --noswap

fedora-disk-kde.ks

@@ -1,5 +0,0 @@
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-kde-common.ks
-
-autopart --type=btrfs --noswap

fedora-disk-lxqt.ks

@@ -1,5 +0,0 @@
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-lxqt-common.ks
-
-autopart --type=btrfs --noswap

fedora-disk-minimal.ks

@@ -1,6 +1,10 @@
 %include fedora-disk-base.ks
 %include fedora-minimal-common.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
 
 autopart --type=plain --noswap
+
+%packages
+-xkeyboard-config
+%end

fedora-disk-phosh.ks

@@ -1,5 +0,0 @@
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-phosh-common.ks
-
-autopart --type=btrfs --noswap

fedora-disk-python-classroom.ks

@@ -1,20 +0,0 @@
-# Maintained by the Fedora Python SIG:
-# http://fedoraproject.org/wiki/SIGs/Python
-# mailto:python-devel@lists.fedoraproject.org
-
-# The Workstion based Python Classroom Lab
-
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-workstation-common.ks
-%include fedora-python-classroom-gnome-common.ks
-
-autopart --type=btrfs --noswap
-
-%packages
--initial-setup
--initial-setup-gui
--libvirt*
--gnome-boxes
-
-%end

fedora-disk-server.ks

@@ -1,11 +1,10 @@
 %include fedora-disk-base.ks
 
-services --enabled=sshd,NetworkManager,chronyd,initial-setup
+services --enabled=sshd,NetworkManager,chronyd,initial-setup,zram-swap
 
 autopart --noswap
 
 %packages
-fedora-release-server
 # install the default groups for the server environment since installing the environment is not working
 @server-product
 @standard

fedora-disk-soas.ks

@@ -1,5 +0,0 @@
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-soas-common.ks
-
-autopart --type=btrfs --noswap

fedora-disk-workstation.ks

@@ -2,12 +2,18 @@
 %include fedora-disk-xbase.ks
 %include fedora-workstation-common.ks
 
-autopart --type=btrfs --noswap
+bootloader --append="cma=256MB"
+
+services --enabled=sshd,NetworkManager,chronyd,zram-swap
+
+autopart --type=plain --noswap
 
 %packages
 -initial-setup
 -initial-setup-gui
-gnome-initial-setup
-anaconda-webui
+
+%end
+
+%post
 
 %end

fedora-disk-xbase.ks

@@ -5,7 +5,6 @@
 @multimedia
 @printing
 -@guest-desktop-agents
-initial-setup-gui
 
 # Need aajohan-comfortaa-fonts for the SVG rnotes images
 aajohan-comfortaa-fonts

fedora-disk-xfce.ks

@@ -1,5 +0,0 @@
-%include fedora-disk-base.ks
-%include fedora-disk-xbase.ks
-%include fedora-xfce-common.ks
-
-autopart --type=btrfs --noswap

fedora-eln-container-base.ks

@@ -1,60 +0,0 @@
-# See fedora-container-common.ks for details on how to hack on container image kickstarts
-# This base is a standard Fedora-ELN image with python3 and dnf
-
-%include fedora-container-common.ks
-
-%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
--fedora-release-container
-fedora-release-eln
-fedora-repos-eln
-rootfiles
-tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
-vim-minimal
-dnf
-dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
-sudo
--glibc-langpack-en
--langpacks-en
-%end
-
-%post --erroronfail --log=/root/anaconda-post.log
-set -eux
-
-# remove some extraneous files
-rm -rf /var/cache/dnf/*
-rm -rf /tmp/*
-
-# https://pagure.io/atomic-wg/issue/308
-printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
-
-
-# https://bugzilla.redhat.com/show_bug.cgi?id=1343138
-# Fix /run/lock breakage since it's not tmpfs in docker
-# This unmounts /run (tmpfs) and then recreates the files
-# in the /run directory on the root filesystem of the container
-#
-# We ignore the return code of the systemd-tmpfiles command because
-# at this point we have already removed the /etc/machine-id and all
-# tmpfiles lines with %m in them will fail and cause a bad return
-# code. Example failure:
-#   [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
-#
-umount /run
-rm -f /run/nologin # https://pagure.io/atomic-wg/issue/316
-
-# Final pruning
-rm -rfv /var/cache/* /var/log/* /tmp/*
-
-%end
-
-%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
-set -eux
-
-# See: https://bugzilla.redhat.com/show_bug.cgi?id=1051816
-# NOTE: run this in nochroot because "find" does not exist in chroot
-KEEPLANG=en_US
-for dir in locale i18n; do
-    find /mnt/sysimage/usr/share/${dir} -mindepth  1 -maxdepth 1 -type d -not \( -name "${KEEPLANG}" -o -name POSIX \) -exec rm -rfv {} +
-done
-
-%end

fedora-eln-guest.ks

@@ -1,238 +0,0 @@
-# Kickstart file to build Fedora ELN Guest image.
-# This image is used to test Fedora ELN content for
-# the cloud instances. This image provides minimally configured
-# system image.
-
-text
-lang en_US.UTF-8
-keyboard us
-timezone --utc America/New_York
-# add console and reorder in %post
-bootloader --timeout=1 --location=mbr --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-selinux --enforcing
-firewall --enabled --service=ssh
-network --bootproto=dhcp --device=link --activate --onboot=on
-#services --enabled=sshd,ovirt-guest-agent --disabled kdump,rhsmcertd
-services --enabled=sshd,NetworkManager,cloud-init,cloud-init-local,cloud-config,cloud-final --disabled kdump,rhsmcertd
-rootpw --iscrypted nope
-
-#
-# Partition Information. Change this as necessary
-# This information is used by appliance-tools but
-# not by the livecd tools.
-#
-zerombr
-clearpart --all --initlabel
-# autopart --type=plain --nohome # --nohome doesn't work because of rhbz#1509350
-# autopart is problematic in that it creates /boot and swap partitions rhbz#1542510 rhbz#1673094
-reqpart
-part / --fstype="xfs" --ondisk=vda --size=8000
-reboot
-
-# Packages
-%packages
-@core
-dnf
-kernel
-yum
-nfs-utils
-dnf-utils
-
-# pull firmware packages out
--aic94xx-firmware
--alsa-firmware
--alsa-lib
--alsa-tools-firmware
--ivtv-firmware
--iwl1000-firmware
--iwl100-firmware
--iwl105-firmware
--iwl135-firmware
--iwl2000-firmware
--iwl2030-firmware
--iwl3160-firmware
--iwl3945-firmware
--iwl4965-firmware
--iwl5000-firmware
--iwl5150-firmware
--iwl6000-firmware
--iwl6000g2a-firmware
--iwl6000g2b-firmware
--iwl6050-firmware
--iwl7260-firmware
--libertas-sd8686-firmware
--libertas-sd8787-firmware
--libertas-usb8388-firmware
-
-# cloud-init does magical things with EC2 metadata, including provisioning
-# a user account with ssh keys.
-cloud-init
-## Adding a dependency for cloud-init as recommended by tdawson
-python3-jsonschema
-
-# rhevm guest-agent (Not available in ELN yet)
-#rhevm-guest-agent-common
-
-# allows the host machine to issue commands to the guest operating system
-qemu-guest-agent
-
-# need this for growpart, because parted doesn't yet support resizepart
-# https://bugzilla.redhat.com/show_bug.cgi?id=966993
-#cloud-utils
-
-#heat-cfntools  # Not available in ELN (yet?)
-
-cloud-utils-growpart
-# We need this image to be portable; also, rescue mode isn't useful here.
-dracut-config-generic
-
-# Don't include dracut-config-rescue. It will have dracut generate a
-# "rescue" entry in the grub menu, but that also means there is a
-# rescue kernel and initramfs that get created, which (currently) add
-# about another 40MiB to the /boot/ partition. Also the "rescue" mode
-# is generally not useful in the cloud.
--dracut-config-rescue
-
-# Needed initially, but removed below.
-firewalld
-
-# cherry-pick a few things from @base
-tar
-tcpdump
-rsync
-
-# Some things from @core we can do without in a minimal install
--biosdevname
--plymouth
--iprutils
-
-# Minimal Cockpit web console
-cockpit-ws
-cockpit-system
-subscription-manager-cockpit
-
-# rh-amazon-rhui-client
-
-# Transitively required by grub2-tools-extra
-langpacks-core-font-en
-
-# We are building Fedora-ELN
-fedora-release-eln
-fedora-repos-eln
-
-# Add rng-tools as source of entropy
-rng-tools
-
-%end
-
-#
-# Add custom post scripts after the base post.
-#
-%post --erroronfail
-
-# workaround anaconda requirements
-passwd -d root
-passwd -l root
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-# this is installed by default but we don't need it in virt
-echo "Removing linux-firmware package."
-dnf -C -y remove linux-firmware
-
-# Remove firewalld; it is required to be present for install/image building.
-echo "Removing firewalld."
-dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
-
-echo -n "Getty fixes"
-# although we want console output going to the serial console, we don't
-# actually have the opportunity to login there. FIX.
-# we don't really need to auto-spawn _any_ gettys.
-sed -i '/^#NAutoVTs=.*/ a\
-NAutoVTs=0' /etc/systemd/logind.conf
-
-# For cloud images, 'eth0' _is_ the predictable device name, since
-# we don't want to be tied to specific virtual (!) hardware
-rm -f /etc/udev/rules.d/70*
-ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
-rm -f /etc/NetworkManager/system-connections/*.nmconnection
-# simple eth0 config, again not hard-coded to the build hardware
-cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-BOOTPROTOv6="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-USERCTL="yes"
-PEERDNS="yes"
-IPV6INIT="yes"
-PERSISTENT_DHCLIENT="1"
-EOF
-
-# set virtual-guest as default profile for tuned
-echo "virtual-guest" > /etc/tuned/active_profile
-
-# generic localhost names
-cat > /etc/hosts << EOF
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-
-EOF
-echo .
-
-cat <<EOL > /etc/sysconfig/kernel
-# UPDATEDEFAULT specifies if new-kernel-pkg should make
-# new kernels the default
-UPDATEDEFAULT=yes
-
-# DEFAULTKERNEL specifies the default kernel package type
-DEFAULTKERNEL=kernel
-EOL
-
-# make sure firstboot doesn't start
-echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
-
-# workaround https://bugzilla.redhat.com/show_bug.cgi?id=966888
-if ! grep -q growpart /etc/cloud/cloud.cfg; then
-  sed -i 's/ - resizefs/ - growpart\n - resizefs/' /etc/cloud/cloud.cfg
-fi
-
-# allow sudo powers to cloud-user
-echo -e 'cloud-user\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
-
-# Disable subscription-manager yum plugins
-sed -i 's|^enabled=1|enabled=0|' /etc/yum/pluginconf.d/product-id.conf
-sed -i 's|^enabled=1|enabled=0|' /etc/yum/pluginconf.d/subscription-manager.conf
-
-echo "Cleaning old yum repodata."
-dnf clean all
-
-# clean up installation logs"
-rm -rf /var/log/yum.log
-rm -rf /var/lib/yum/*
-rm -rf /root/install.log
-rm -rf /root/install.log.syslog
-rm -rf /root/anaconda-ks.cfg
-rm -rf /var/log/anaconda*
-
-echo "Fixing SELinux contexts."
-touch /var/log/cron
-touch /var/log/boot.log
-mkdir -p /var/cache/yum
-/usr/sbin/fixfiles -R -a restore
-
-# remove random-seed so it's not the same every time
-rm -f /var/lib/systemd/random-seed
-
-# Remove machine-id on the pre generated images
-cat /dev/null > /etc/machine-id
-
-# Anaconda is writing to /etc/resolv.conf from the generating environment.
-# The system should start out with an empty file.
-truncate -s 0 /etc/resolv.conf
-
-%end

fedora-i3-common.ks

@@ -1,35 +0,0 @@
-# fedora-livecd-i3.ks
-#
-# Description:
-# - Fedora Live Spin with the tiling window manager i3wm
-#
-# Maintainer(s):
-# - Nasir Hussain    <nasirhm@fedoraproject.org>
-# - Eduard Lucena    <x3mboy@fedoraproject.org>
-# - Justin W. Flory  <jwf@fedoraproject.org>
-# - Dan Cermak       <defolos@fedoraproject.org>
-
-
-%packages
-@^i3-desktop-environment
-feh
-dex-autostart
-thunar
-
-
-# unlock default keyring. FIXME: Should probably be done in comps
-gnome-keyring-pam
-# Admin tools are handy to have
-@admin-tools
-wget
-# Better more popular browser
-system-config-printer
-
-# save some space
--autofs
--acpid
--gimp-help
--desktop-backgrounds-basic
--aspell-*                   # dictionaries are big
-
-%end

fedora-iot.ks

@@ -5,13 +5,18 @@ lang en_US.UTF-8
 keyboard us
 timezone --utc Etc/UTC
 
+auth --useshadow --passalgo=sha512
 selinux --enforcing
 rootpw --lock --iscrypted locked
 
-bootloader --timeout=1 --append="modprobe.blacklist=vc4"
+# Add most common consoles console=ttyAMA0 console=ttyS0 console=ttyS1 as kernel boot parameter
+bootloader --timeout=1 --append="net.ifnames=0 modprobe.blacklist=vc4"
 
 network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=NetworkManager,sshd
+services --enabled=NetworkManager,sshd,rngd,initial-setup,zram-swap
+
+# tell Initial Setup to run in the reconfig mode
+firstboot --reconfig --enable
 
 zerombr
 clearpart --all --initlabel --disklabel=msdos
@@ -19,36 +24,41 @@ autopart --nohome --noswap --type=plain
 
 # Equivalent of %include fedora-repo.ks
 # Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/rawhide/${basearch}/iot
+ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/stable/${basearch}/iot
 
 reboot
 
 %post --erroronfail
-
 # Find the architecture we are on
 arch=$(uname -m)
+
 # Setup Raspberry Pi firmware
+if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
 if [[ $arch == "aarch64" ]]; then
-cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
+cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
+else
+cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/fw/rpi2-u-boot.bin
+cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/fw/rpi3-u-boot.bin
+fi
 fi
 
 # Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
 # We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-iot https://dl.fedoraproject.org/iot/repo/ "fedora/rawhide/${arch}/iot"
+ostree admin set-origin --index 0 fedora-iot https://dl.fedoraproject.org/iot/repo/ "fedora/stable/${arch}/iot"
 
 # Make sure the ref we're supposedly sitting on (according
 # to the updated origin) exists.
-ostree refs "fedora-iot:fedora/rawhide/${arch}/iot" --create "fedora-iot:fedora/rawhide/${arch}/iot"
+ostree refs "fedora-iot:fedora/stable/${arch}/iot" --create "fedora-iot:fedora/stable/${arch}/iot"
 
 # Remove the old ref so that the commit eventually gets cleaned up.
-ostree refs "fedora-iot:fedora/rawhide/${arch}/iot" --delete
+ostree refs "fedora-iot:fedora/stable/${arch}/iot" --delete
 
 # delete/add the remote with new options to enable gpg verification
 # and to point them at the cdn url
 ostree remote delete fedora-iot
 ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/ --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/iot/mirrorlist  fedora-iot 'https://ostree.fedoraproject.org/iot'
 
-# We're getting a stray console= from somewhere, work around it
+# We're gettin a stray console= from somewhere, work around it
 rpm-ostree kargs --delete=console=tty0
 
 # older versions of livecd-tools do not follow "rootpw --lock" line above
@@ -58,15 +68,30 @@ passwd -l root
 # Work around https://bugzilla.redhat.com/show_bug.cgi?id=1193590
 cp /etc/skel/.bash* /var/roothome
 
+echo -n "Network fixes"
+# initscripts don't like this file to be missing.
+cat > /etc/sysconfig/network << EOF
+NETWORKING=yes
+NOZEROCONF=yes
+EOF
+
 # Remove any persistent NIC rules generated by udev
 rm -vf /etc/udev/rules.d/*persistent-net*.rules
+# And ensure that we will do DHCP on eth0 on startup
+cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
+DEVICE="eth0"
+BOOTPROTO="dhcp"
+ONBOOT="yes"
+TYPE="Ethernet"
+PERSISTENT_DHCLIENT="yes"
+EOF
 
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed
 
 echo "Packages within this iot image:"
 echo "-----------------------------------------------------------------------"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 echo "-----------------------------------------------------------------------"
 # Note that running rpm recreates the rpm db files which aren't needed/wanted
 rm -f /var/lib/rpm/__db*
@@ -77,7 +102,11 @@ dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
 rm -f /var/tmp/zeros
 echo "(Don't worry -- that out-of-space error was expected.)"
 
-rm -f /etc/NetworkManager/system-connections/*.nmconnection
+# For trac ticket https://pagure.io/atomic-wg/issue/128
+rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
+
+echo "Adding Developer Mode GRUB2 menu item."
+/usr/libexec/atomic-devmode/bootentry add
 
 # Anaconda is writing an /etc/resolv.conf from the install environment.
 # The system should start out with an empty file, otherwise cloud-init

fedora-kde-common.ks

@@ -1,42 +1,57 @@
 
 %packages
-# install env-group to resolve RhBug:1891500
-@^kde-desktop-environment
-
 @firefox
 @kde-apps
+@kde-desktop
 @kde-media
-@kde-pim
-@libreoffice
-# add libreoffice-draw and libreoffice-math (pagureio:fedora-kde/SIG#103)
-libreoffice-draw
-libreoffice-math
-
-fedora-release-kde
-
--@admin-tools
-
-# drop tracker stuff pulled in by gtk3 (pagureio:fedora-kde/SIG#124)
--tracker-miners
--tracker
+@kde-office
+@networkmanager-submodules
 
 ### The KDE-Desktop
 
+### Browser
+falkon
+
 ### fixes
 
+# use kde-print-manager instead of system-config-printer
+-system-config-printer
+# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
+mariadb-embedded
+mariadb-connector-c
+mariadb-server
+
 # minimal localization support - allows installing the kde-l10n-* packages
+system-config-language
 kde-l10n
 
+# unwanted packages from @kde-desktop
+# don't include these for now to fit on a cd
+-desktop-backgrounds-basic
+-kdeaccessibility*
+#-ktorrent			# kget has also basic torrent features (~3 megs)
+-digikam			# digikam has duplicate functionality with gwenview (~28 megs)
+#-amarok 			# ~23 megs (mysql-embedded etc.)
+-kipi-plugins			# ~8 megs + drags in Marble
+#-kdeplasma-addons		# ~16 megs
+#-krusader			# ~4 megs
+
 # Additional packages that are not default in kde-* groups, but useful
+k3b				# ~15 megs
+#kdeartwork			# only include some parts of kdeartwork
 fuse
 mediawriter
 
 ### space issues
--ktorrent			# kget has also basic torrent features (~3 megs)
--digikam			# digikam has duplicate functionality with gwenview (~28 megs)
--kipi-plugins			# ~8 megs + drags in Marble
--krusader			# ~4 megs
--k3b				# ~15 megs
+
+# admin-tools
+-gnome-disk-utility
+# kcm_clock still lacks some features, so keep system-config-date around
+#-system-config-date
+# prefer kcm_systemd
+-system-config-services
+# prefer/use kusers
+-system-config-users
 
 ## avoid serious bugs by omitting broken stuff
 

fedora-kde-minimization.ks

@@ -0,0 +1,8 @@
+# remove input methods to free space
+%packages
+-@input-methods
+-scim*
+-iok
+%end
+
+

fedora-live-astronomy_kde.ks

@@ -18,7 +18,7 @@
 %include fedora-live-minimization.ks
 
 # The recommended part size for DVDs is too close to use for the astronomy spin
-part / --size 16000
+part / --size 14500
 
 %packages
 
@@ -34,23 +34,29 @@ astrometry
 astrometry-tycho2
 cdsclient
 fpack
+gcx
 psfex
+saoimage
 scamp
 sextractor
-#siril
+siril
 skyviewer
 swarp
 wcstools
 
 # Observatory: KStars + INDI drivers
-indi-3rdparty-drivers
+indi-aagcloudwatcher
+indi-apogee
+indi-eqmod
+indi-gphoto
+indi-sx
 indistarter
 kstars
 
 # misc. astronomy
-#celestia
+celestia
 stellarium
-#virtualplanet
+virtualplanet
 
 # Some astro environment stuff
 astronomy-menus
@@ -78,6 +84,7 @@ astropy-tools
 ginga
 python3-astropy
 python3-astroML
+python3-astroML-addons
 python3-astroquery
 python3-astroscrappy
 python3-APLpy
@@ -89,23 +96,21 @@ python3-photutils
 python3-pyvo
 python3-reproject
 python3-sep
+python3-wcsaxes
 
 # matplotlib backends
+python3-matplotlib-qt4
 python3-matplotlib-qt5
 python3-matplotlib-tk
 
 
 # Python IDE very useful for scientific use
-# FTI with Python 3.12:
-# https://bugzilla.redhat.com/show_bug.cgi?id=2220598
-# can be restored when that is fixed
-#python3-spyder
-
-# BOINC for distributed computing
-boinc-client
-boinc-manager
+python3-spyder
 
 #Version control- a GUI for each as well
+
+# Installing rapidsvn will also install subversion package
+rapidsvn 
 git
 git-gui
 
@@ -115,18 +120,17 @@ gimp
 kst
 kst-docs
 kst-fits
-# LabPlot currently not installable due to #2044284
-#LabPlot
+LabPlot
 
 #Misc. Utils
+# icedtea-web to have webstart useful for VO tools
+icedtea-web
 ImageMagick
 kate
 kate-plugins
 rlwrap
 screen
-
-# Java JRE for VO tools
-java
+plasma-applet-redshift-control
 
 # Omit KDE 4 translations for now: https://bugzilla.redhat.com/show_bug.cgi?id=1197940
 -kde-l10n-*

fedora-live-base.ks

@@ -10,6 +10,7 @@
 lang en_US.UTF-8
 keyboard us
 timezone US/Eastern
+auth --useshadow --passalgo=sha512
 selinux --enforcing
 firewall --enabled --service=mdns
 xconfig --startxonboot
@@ -24,39 +25,272 @@ shutdown
 %include fedora-repo.ks
 
 %packages
+@base-x
+@guest-desktop-agents
+@standard
+@core
+@fonts
+@input-methods
+@dial-up
+@multimedia
+@hardware-support
+@printing
+
 # Explicitly specified here:
 # <notting> walters: because otherwise dependency loops cause yum issues.
 kernel
 kernel-modules
 kernel-modules-extra
 
+# This was added a while ago, I think it falls into the category of
+# "Diagnosis/recovery tool useful from a Live OS image".  Leaving this untouched
+# for now.
+memtest86+
+
 # The point of a live image is to install
 anaconda
 anaconda-install-env-deps
 anaconda-live
 @anaconda-tools
-# Anaconda has a weak dep on this and we don't want it on livecds, see
-# https://fedoraproject.org/wiki/Changes/RemoveDeviceMapperMultipathFromWorkstationLiveCD
--fcoe-utils
--device-mapper-multipath
 
 # Need aajohan-comfortaa-fonts for the SVG rnotes images
 aajohan-comfortaa-fonts
 
 # Without this, initramfs generation during live image creation fails: #1242586
 dracut-live
+syslinux
 
 # anaconda needs the locales available to run for different locales
 glibc-all-langpacks
 
-# provide the livesys scripts
-livesys-scripts
+# no longer in @core since 2018-10, but needed for livesys script
+initscripts
+chkconfig
 %end
 
 %post
-# Enable livesys services
-systemctl enable livesys.service
-systemctl enable livesys-late.service
+# FIXME: it'd be better to get this installed from a package
+cat > /etc/rc.d/init.d/livesys << EOF
+#!/bin/bash
+#
+# live: Init script for live image
+#
+# chkconfig: 345 00 99
+# description: Init script for live image.
+### BEGIN INIT INFO
+# X-Start-Before: display-manager chronyd
+### END INIT INFO
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
+    exit 0
+fi
+
+if [ -e /.liveimg-configured ] ; then
+    configdone=1
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+livedir="LiveOS"
+for arg in \`cat /proc/cmdline\` ; do
+  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
+    livedir=\${arg##rd.live.dir=}
+    continue
+  fi
+  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
+    livedir=\${arg##live_dir=}
+  fi
+done
+
+# enable swaps unless requested otherwise
+swaps=\`blkid -t TYPE=swap -o device\`
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
+  for s in \$swaps ; do
+    action "Enabling swap partition \$s" swapon \$s
+  done
+fi
+if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
+  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
+fi
+
+mountPersistentHome() {
+  # support label/uuid
+  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
+    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
+  fi
+
+  # if we're given a file rather than a blockdev, loopback it
+  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
+    # mtd devs don't have a block device but get magic-mounted with -t jffs2
+    mountopts="-t jffs2"
+  elif [ ! -b "\$homedev" ]; then
+    loopdev=\`losetup -f\`
+    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
+      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
+    fi
+    losetup \$loopdev \$homedev
+    homedev=\$loopdev
+  fi
+
+  # if it's encrypted, we need to unlock it
+  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
+    echo
+    echo "Setting up encrypted /home device"
+    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
+    homedev=/dev/mapper/EncHome
+  fi
+
+  # and finally do the mount
+  mount \$mountopts \$homedev /home
+  # if we have /home under what's passed for persistent home, then
+  # we should make that the real /home.  useful for mtd device on olpc
+  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
+  [ -x /sbin/restorecon ] && /sbin/restorecon /home
+  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
+}
+
+findPersistentHome() {
+  for arg in \`cat /proc/cmdline\` ; do
+    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
+      homedev=\${arg##persistenthome=}
+    fi
+  done
+}
+
+if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
+  findPersistentHome
+elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
+  homedev=/run/initramfs/live/\${livedir}/home.img
+fi
+
+# if we have a persistent /home, then we want to go ahead and mount it
+if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
+  action "Mounting persistent /home" mountPersistentHome
+fi
+
+if [ -n "\$configdone" ]; then
+  exit 0
+fi
+
+# add liveuser user with no passwd
+action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
+passwd -d liveuser > /dev/null
+usermod -aG wheel liveuser > /dev/null
+
+# Remove root password lock
+passwd -d root > /dev/null
+
+# turn off firstboot for livecd boots
+systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
+systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
+systemctl stop firstboot-text.service 2> /dev/null || :
+systemctl stop firstboot-graphical.service 2> /dev/null || :
+
+# don't use prelink on a running live image
+sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
+
+# turn off mdmonitor by default
+systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
+systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
+systemctl stop mdmonitor.service 2> /dev/null || :
+systemctl stop mdmonitor-takeover.service 2> /dev/null || :
+
+# don't enable the gnome-settings-daemon packagekit plugin
+gsettings set org.gnome.software download-updates 'false' || :
+
+# don't start cron/at as they tend to spawn things which are
+# disk intensive that are painful on a live image
+systemctl --no-reload disable crond.service 2> /dev/null || :
+systemctl --no-reload disable atd.service 2> /dev/null || :
+systemctl stop crond.service 2> /dev/null || :
+systemctl stop atd.service 2> /dev/null || :
+
+# turn off abrtd on a live image
+systemctl --no-reload disable abrtd.service 2> /dev/null || :
+systemctl stop abrtd.service 2> /dev/null || :
+
+# Don't sync the system clock when running live (RHBZ #1018162)
+sed -i 's/rtcsync//' /etc/chrony.conf
+
+# Mark things as configured
+touch /.liveimg-configured
+
+# add static hostname to work around xauth bug
+# https://bugzilla.redhat.com/show_bug.cgi?id=679486
+# the hostname must be something else than 'localhost'
+# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
+echo "localhost-live" > /etc/hostname
+
+EOF
+
+# bah, hal starts way too late
+cat > /etc/rc.d/init.d/livesys-late << EOF
+#!/bin/bash
+#
+# live: Late init script for live image
+#
+# chkconfig: 345 99 01
+# description: Late init script for live image.
+
+. /etc/init.d/functions
+
+if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
+    exit 0
+fi
+
+exists() {
+    which \$1 >/dev/null 2>&1 || return
+    \$*
+}
+
+touch /.liveimg-late-configured
+
+# read some variables out of /proc/cmdline
+for o in \`cat /proc/cmdline\` ; do
+    case \$o in
+    ks=*)
+        ks="--kickstart=\${o#ks=}"
+        ;;
+    xdriver=*)
+        xdriver="\${o#xdriver=}"
+        ;;
+    esac
+done
+
+# if liveinst or textinst is given, start anaconda
+if strstr "\`cat /proc/cmdline\`" liveinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst \$ks
+fi
+if strstr "\`cat /proc/cmdline\`" textinst ; then
+   plymouth --quit
+   /usr/sbin/liveinst --text \$ks
+fi
+
+# configure X, allowing user to override xdriver
+if [ -n "\$xdriver" ]; then
+   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
+Section "Device"
+	Identifier	"Videocard0"
+	Driver	"\$xdriver"
+EndSection
+FOE
+fi
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys
+/sbin/restorecon /etc/rc.d/init.d/livesys
+/sbin/chkconfig --add livesys
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
 
 # enable tmpfs for /tmp
 systemctl enable tmp.mount
@@ -70,8 +304,11 @@ EOF
 
 # work around for poor key import UI in PackageKit
 rm -f /var/lib/rpm/__db*
+releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
+basearch=$(uname -i)
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
 echo "Packages within this LiveCD"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*
 
@@ -96,7 +333,7 @@ rm -f /boot/*-rescue*
 
 # Disable network service here, as doing it in the services line
 # fails due to RHBZ #1369794
-systemctl disable network
+/sbin/chkconfig network off
 
 # Remove machine-id on pre generated images
 rm -f /etc/machine-id
@@ -104,3 +341,25 @@ touch /etc/machine-id
 
 %end
 
+
+%post --nochroot
+cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
+
+# only works on x86, x86_64
+if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
+    # For livecd-creator builds
+    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
+    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
+
+    # For lorax/livemedia-creator builds
+    sed -i '
+    /## make boot.iso/ i\
+    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
+    <% f = "usr/bin/livecd-iso-to-disk" %>\
+    %if exists(f):\
+        install ${f} ${LIVEDIR}/${f|basename}\
+    %endif\
+    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
+fi
+
+%end

fedora-live-budgie.ks

@@ -1,17 +0,0 @@
-# Description:
-# - Fedora Live Spin with the Budgie Desktop Environment
-# 
-# Maintainer(s):
-# - Joshua Strobl <joshua@buddiesofbudgie.org>
-
-%include fedora-live-base.ks
-%include fedora-budgie-common.ks
-
-part / --size 7750
-
-%post
-
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="budgie"/' /etc/sysconfig/livesys
-
-%end

fedora-live-cinnamon.ks

@@ -21,8 +21,32 @@ PREFERRED=/usr/bin/cinnamon-session
 DISPLAYMANAGER=/usr/sbin/lightdm
 EOF
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="cinnamon"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Cinnamon as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
+
+# and mark it as executable
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
 
 %end
 

fedora-live-comp_neuro.ks

@@ -1,12 +0,0 @@
-# Description: The Workstation based NeuroFedora computational neuroscience lab image.
-# https://fedoraproject.org/wiki/Changes/Comp_Neuro_Lab
-#
-# Maintained by the NeuroFedora SIG:
-# https://neuro.fedoraproject.org
-# mailto:neuro-sig@lists.fedoraproject.org
-
-%include fedora-live-workstation.ks
-%include fedora-comp-neuro-common.ks
-%include fedora-neuro-gnome-common.ks
-
-part / --size 10240

fedora-live-design_suite.ks

@@ -1,17 +1,55 @@
 # fedora-design-suite.ks
 # Based on Live Workstation
-# A collection of applications for professional visual designers
-# http://fedoraproject.org/wiki/Design_Suite
-# Maintained by Luya Tshimbalanga <luya AT fedoraproject DOT org>
-# Credit to Sebastian Dziallas for initiating the project
-
+# Description:
+# - A collection of applications targeted towards professional visual designers
+# Website: http://fedoraproject.org/wiki/Design_Suite
+# Maintainer:
+# - Luya Tshimbalanga <luya AT fedoraproject DOT org>
+# - Credit to Sebastian Dziallas for initiating the project
 %include fedora-live-workstation.ks
-%include fedora-design-suite-common.ks
 
 # Size partition
 part / --size 14336
 
+%packages
+# Switch to groups for design suite
+@design-suite
+
+# Provides backup application
+#deja-dup
+#deja-dup-nautilus
+
+# Add extra gnome applications
+gnome-calendar
+gnome-photos
+gnome-shell-extension-pomodoro
+gnome-todo
+
+# Add cosmetic for gnome-terminal
+powerline
+powerline-fonts
+
+# Extra wallpapers
+f30-backgrounds-extras-gnome
+
+# removal of unneeded applications
+-gnome-boxes
+-eog
+-rdesktop
+
+# temporarily removing conflicting application
+-synfigstudio
+-mypaint
+
+%end
+
 %post
+#Override the favorite desktop application in Dash
+cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
+FOE
+
 # Add link to lists of tutorials
 cat >> /usr/share/applications/list-design-tutorials.desktop << FOE
 [Desktop Entry]
@@ -51,20 +89,6 @@ Categories=Documentation;
 FOE
 chmod a+x /usr/share/applications/fedora-design-team.desktop
 
-# Use Powerline in bash
-cat >>  $HOME/.bashrc << FOE
-# Enable powerline daemon
-if [ -f `which powerline-daemon` ]; then
-  powerline-daemon -q
-  POWERLINE_BASH_CONTINUATION=1
-  POWERLINE_BASH_SELECT=1
-  . /usr/share/powerline/bash/powerline.sh
-fi
-FOE
-
-#Override the favorite desktop application in Dash
-sed -i "s/favorite-apps=."'*'"/favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']/" /etc/rc.d/init.d/livesys
-
 # rebuild schema cache with any overrides we installed
 glib-compile-schemas /usr/share/glib-2.0/schemas
 

fedora-live-games.ks

@@ -1,19 +1,9 @@
-# fedora-live-games.ks
+# fedora-livedvd-games.ks
 #
-# Maintainers:
+# Maintainer(s):
 # - Darryl T. Agostinelli <dagostinelli@gmail.com>
-#   https://fedoraproject.org/wiki/User:Dagostinelli
-#
-# - Richard Anaya <richard.anaya@gmail.com>
-#   https://fedoraproject.org/wiki/User:Richardanaya
-#
-# Former Maintainers:
-# - Bruno Wolff III <bruno@wolff.to>
-#   https://fedoraproject.org/wiki/User:Bruno
-#
-# - Rahul Sundaram <sundaram@fedoraproject.org>
-#   https://fedoraproject.org/wiki/User:Sundaram
-#
+# - Formerly maintained by Bruno Wolff III <bruno@wolff.to>
+# - Formerly maintained by Rahul Sundaram
 
 %include fedora-live-xfce.ks
 
@@ -48,6 +38,7 @@ asc-music
 astromenace
 # beneath-a-steel-sky-cd scummvm games cut for size
 boswars
+btanks
 bzflag
 crossfire-client
 extremetuxracer
@@ -55,28 +46,29 @@ extremetuxracer
 freeciv
 freecol
 freedoom
-freedroidrpg
+# freedroidrpg # Cut for size
 frozen-bubble
+gl-117
 # glob2 - currently broken
 lincity-ng
-#tmw - currently broken
+tmw
 #maniadrive - currently broken
 #maniadrive-music - has been retired
 megaglest
 nethack-vultures
 netpanzer
-neverball
+#neverball #cut for size
 nogravity
 #pinball # Would pull in fluid-soundfont-lite-patches
 scorched3d
 # supertux # Crashing
-supertuxkart
+#supertuxkart #remove for size
 ultimatestunts
 warzone2100
 wesnoth
 # worminator # Would pull in fluid-soundfont-lite-patches
-warmux
-xmoto
+# warmux # Cut for size
+# xmoto # Cut for size
 
 # traditional (small)
 
@@ -93,11 +85,12 @@ glaxium
 gnubg
 gnugo
 haxima
-#hedgewars -- broken
+hedgewars
 kcheckers
 knights
 lbrickbuster2
 # liquidwar # Would pull in fluid-soundfont-lite-patches
+londonlaw
 lordsawar
 # lure scummvm games cut for size
 # machineball # Would pull in fluid-soundfont-lite-patches
@@ -107,8 +100,9 @@ pachi
 pioneers
 quarry
 # Ri-li cut for size
-# rogue # recently abandoned. Someone picked it up. Waiting for approval.
+# rogue # abandoned. Someone pick it up so we can include it again!
 # scorchwentbonkers # Would pull in fluid-soundfont-lite-patches
+seahorse-adventures
 solarwolf
 sopwith
 stormbaancoureur
@@ -120,6 +114,7 @@ xblast
 auriferous
 alienblaster
 # duel3 # Would pull in fluid-soundfont-lite-patches
+lmarbles
 powermanga
 # raidem # Would pull in fluid-soundfont-lite-patches
 # raidem-music # Would pull in fluid-soundfont-lite-patches
@@ -136,13 +131,14 @@ KoboDeluxe
 Maelstrom
 methane
 njam
+seahorse-adventures
 shippy
 tecnoballz
 wordwarvi
 xgalaxy
 # zasx # Would pull in fluid-soundfont-lite-patches
 
-# falling blocks games (small)
+# falling blocks games (small) 
 
 amoebax
 crack-attack
@@ -152,12 +148,14 @@ gweled
 
 # puzzles (big)
 enigma
-# fillets-ng # broken in f34
+fillets-ng
 pingus
 
 # puzzles (small)
 
+escape
 # gbrainy Removed for space - only game that pulls in mono
+magicor
 mirrormagic
 pipenightdreams
 pipepanic
@@ -167,11 +165,15 @@ vodovod
 
 # card games
 
+#poker2d - dropped from F14 for being orphaned
 PySolFC
 
 # educational/simulation
 
-#celestia - not currently building
+bygfoot
+celestia
+childsplay
+gcompris
 planets
 tuxpaint
 tuxpaint-stamps

fedora-live-i3.ks

@@ -1,30 +0,0 @@
-# fedora-livecd-i3.ks
-#
-# Description:
-# - Fedora Live Spin with the tiling window manager i3
-#
-# Maintainer(s):
-# - Nasir Hussain    <nasirhm@fedoraproject.org>
-# - Eduard Lucena    <x3mboy@fedoraproject.org>
-# - Dan Cermak       <defolos@tummy.com>
-# - Justin W. Flory  <jwf@fedoraproject.org>
-
-%include fedora-live-base.ks
-%include fedora-live-minimization.ks
-%include fedora-i3-common.ks
-
-%post
-# i3 configuration
-
-# create /etc/sysconfig/desktop (needed for installation)
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/i3
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="i3"/' /etc/sysconfig/livesys
-
-%end
-

fedora-live-jam_kde.ks

@@ -7,7 +7,9 @@
 # Web: https://fedoraproject.org/wiki/Fedora_jam
 # Web: insert spinspacke when created
 
-# Maintainer: JT Pennington (q5sys) <jt@obs-sec.com>
+# Maintainer: Jørn Lomax <northlomax@gmail.com>
+#             https://fedoraproject.org/wiki/User:jvlomax
+#             Brendan Jones <brendan.jones.it@gmail.com>
 
 %include fedora-live-kde.ks
 
@@ -18,10 +20,123 @@ part / --size 10240 --fstype ext4
 bootloader --append="threadirqs"
 
 %packages
-@audio
 
-#pipewire
-pipewire
+#alsa
+alsa-firmware
+alsa-tools
+alsa-utils
+alsamixergui
+alsa-plugins-jack
+alsa-plugins-pulseaudio
+alsa-plugins-usbstream
+alsa-plugins-samplerate
+alsa-plugins-upmix
+alsa-plugins-vdownmix
+a2jmidid
+aj-snapshot
+
+#jack 
+jack-audio-connection-kit
+jack-audio-connection-kit-dbus
+qjackctl
+jackctlmmc
+ffado
+
+#pulse
+pulseaudio-module-jack
+pavucontrol
+
+#midi
+qsynth
+fluidsynth
+fluid-soundfont-gm
+fluidsynth-dssi
+timidity++
+qmidiarp
+vmpk
+harmonyseq
+
+#synthesis
+hydrogen
+bristol
+monobristol
+zynaddsubfx
+yoshimi
+swami
+Add64
+synthv1
+samplv1
+drumkv1
+ams
+
+#guitar
+rakarrack
+guitarix
+tuxguitar
+sooperlooper
+
+#recodring and DAW
+audacity
+ardour5
+rosegarden4
+seq24
+muse
+qtractor
+non-session-manager
+non-daw
+non-sequencer
+non-mixer
+
+# audio-plugins
+calf
+dssi
+jack-rack
+ladspa
+
+#ladpsa plugins
+ladspa-amb-plugins
+ladspa-autotalent-plugins
+ladspa-blop-plugins
+ladspa-cmt-plugins
+ladspa-fil-plugins
+ladspa-mcp-plugins
+ladspa-rev-plugins
+ladspa-swh-plugins
+ladspa-tap-plugins
+ladspa-vco-plugins
+
+#lv2 plugins
+lv2
+lv2-avw-plugins
+lv2-invada-plugins
+lv2-kn0ck0ut
+lv2-ll-plugins
+lv2-swh-plugins
+lv2-vocoder-plugins
+lv2-zynadd-plugins
+lv2dynparam
+lv2-abGate
+lv2-c++-tools 
+lv2-samplv1
+lv2-synthv1
+lv2-drumkv1
+lv2-triceratops
+lv2-newtonator
+lv2-x42-plugins
+lv2-fomp-plugins
+lv2-sorcer
+lv2-fabla
+lv2-artyfx-plugins
+
+#dssi
+nekobee-dssi
+whysynth-dssi
+xsynth-dssi
+hexter-dssi
+
+zynjacku 
+zita-at1
+zita-rev1
 
 #sound analasys, none of these are packaged yet
 #praat bug_id=666656
@@ -32,15 +147,35 @@ emacs
 emacs-color-theme
 vim
 nano
+mscore
+lilypond
+frescobaldi
+mup
 
 #audio utilities
+jamin
+lash
+jack_capture
+jaaa
+jmeters
+qastools
+arpage
+realTimeConfigQuickScan
+rtirq
+#patchage
+#ladish #not packaged yet
+japa
+radium-compressor
 
 # fedora jam theming (to be customized)
+kfaenza-icon-theme
 fedora-jam-backgrounds
 fedora-jam-kde-theme
 
 #Misc. Utils
 screen
+shutter
+-ksnapshot
 multimedia-menus
 kernel-tools
 
@@ -49,34 +184,33 @@ kernel-tools
 firefox
 thunderbird
 
-#remove packages not needed
--akregator
--kaddressbook
--kmail
--kontact
--korganizer
--non-mixer
--non-session-manager
--non-sequencer
+#remove packages not need
+#-kdesdk-umbrello
+#-kdesdk-kcachegrindy
+
+#-kdesdk-kompare
+#-kdepim
 
 %end
 
 %post
 
-# Override livesys-kde settings
-cat >> /var/lib/livesys/livesys-session-extra << EOF
-
 #setup kickoff favorites
 /bin/mkdir -p /etc/skel/.config
 
-JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/mozilla-thunderbird.desktop,/usr/share/applications/studio-controls.desktop,/usr/share/applications/ardour6.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop
+JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/pavucontrol.desktop,/usr/share/applications/kde4/kfmclient_html.desktop,/usr/share/applications/kde4/Kontact.desktop,/usr/share/applications/kde4/ktp-contactlist.desktop
 JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES
 
-cat <<FOE  >> /etc/skel/.config/kickoffrc
+cat <<EOF  >> /etc/skel/.config/kickoffrc
 [Favorites]
 FavoriteURLs=$JAMFAVORITES
-FOE
+EOF
 
+# Override fedora-live-kde-base.ks settings
+sed -i /etc/rc.d/init.d/livesys -res"#^(FavoriteURLs=).*#\1${JAMFAVORITESLIVE}#"
+
+
+cat >> /etc/rc.d/init.d/livesys << EOF
 /usr/sbin/usermod -a -G jackuser,audio liveuser
 EOF
 

fedora-live-kde-base.ks

@@ -19,7 +19,68 @@ cat > /root/.config/gtk-3.0/settings.ini << EOF
 gtk-theme-name = Adwaita
 EOF
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="kde"/' /etc/sysconfig/livesys
+# add initscript
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# set up autologin for user liveuser
+if [ -f /etc/sddm.conf ]; then
+sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
+sed -i 's/^#Session=.*/Session=plasma.desktop/' /etc/sddm.conf
+else
+cat > /etc/sddm.conf << SDDM_EOF
+[Autologin]
+User=liveuser
+Session=plasma.desktop
+SDDM_EOF
+fi
+
+# add liveinst.desktop to favorites menu
+mkdir -p /home/liveuser/.config/
+cat > /home/liveuser/.config/kickoffrc << MENU_EOF
+[Favorites]
+FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
+MENU_EOF
+
+# show liveinst.desktop on desktop and in menu
+sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+# set executable bit disable KDE security warning
+chmod +x /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+# Set akonadi backend
+mkdir -p /home/liveuser/.config/akonadi
+cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
+[%General]
+Driver=QSQLITE3
+AKONADI_EOF
+
+# Disable plasma-pk-updates (bz #1436873 and 1206760)
+echo "Removing plasma-pk-updates package."
+rpm -e plasma-pk-updates
+
+# Disable baloo
+cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
+[Basic Settings]
+Indexing-Enabled=false
+BALOO_EOF
+
+# Disable kres-migrator
+cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
+[Migration]
+Enabled=false
+KRES_EOF
+
+# Disable kwallet migrator
+cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
+[Migration]
+alreadyMigrated=true
+KWALLET_EOL
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+
+EOF
 
 %end

fedora-live-kde.ks

@@ -9,9 +9,10 @@
 
 %include fedora-live-kde-base.ks
 %include fedora-live-minimization.ks
+%include fedora-kde-minimization.ks
 
 # DVD payload
-part / --size=9000
+part / --size=6500
 
 %post
 %end

fedora-live-lxde.ks

@@ -19,8 +19,46 @@ PREFERRED=/usr/bin/startlxde
 DISPLAYMANAGER=/usr/sbin/lxdm
 EOF
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="lxde"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+# disable screensaver locking and make sure gamin gets started
+cat > /etc/xdg/lxsession/LXDE/autostart << FOE
+/usr/libexec/gam_server
+@lxpanel --profile LXDE
+@pcmanfm --desktop --profile LXDE
+/usr/libexec/notification-daemon
+FOE
+
+# set up preferred apps 
+cat > /etc/xdg/libfm/pref-apps.conf << FOE 
+[Preferred Applications]
+WebBrowser=firefox.desktop
+MailClient=sylpheed.desktop
+FOE
+
+# set up auto-login for liveuser
+sed -i 's/# autologin=.*/autologin=liveuser/g' /etc/lxdm/lxdm.conf
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
+
+# create default config for clipit, otherwise it displays a dialog on startup
+mkdir -p /home/liveuser/.config/clipit
+cat > /home/liveuser/.config/clipit/clipitrc  << FOE
+[rc]
+use_copy=true
+save_uris=true
+save_history=false
+statics_show=true
+single_line=true
+FOE
+
+# this goes at the end after all other changes.
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
 
 %end
 

fedora-live-lxqt.ks

@@ -11,13 +11,41 @@
 %include fedora-live-minimization.ks
 %include fedora-lxqt-common.ks
 
-%packages
-dracut-config-generic
-%end
-
 %post
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="lxqt"/' /etc/sysconfig/livesys
+# add initscript
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+# set up autologin for user liveuser
+if [ -f /etc/sddm.conf ]; then
+sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
+sed -i 's/^#Session=.*/Session=lxqt.desktop/' /etc/sddm.conf
+else
+cat > /etc/sddm.conf << SDDM_EOF
+[Autologin]
+User=liveuser
+Session=lxqt.desktop
+SDDM_EOF
+fi
+
+# show liveinst.desktop on desktop and in menu
+sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
+
+# set up preferred apps 
+cat > /etc/xdg/libfm/pref-apps.conf << FOE 
+[Preferred Applications]
+WebBrowser=qupzilla.desktop
+FOE
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+
+EOF
 
 %end
 

fedora-live-mate_compiz.ks

@@ -7,10 +7,45 @@
 %include fedora-mate-common.ks
 %include fedora-live-minimization.ks
 
-part / --size 8192
+part / --size 7168
 
 %post
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="mate"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+fi
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
+
+# and mark it as executable
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set MATE as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=mate/' /etc/lightdm/lightdm.conf
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+EOF
 
 %end

fedora-live-minimization.ks

@@ -4,6 +4,13 @@
 %packages
 
 # save some space
+-mpage
 -hplip
+-isdn4k-utils
+
+# scanning takes quite a bit of space :/
+-xsane
+-xsane-gimp
+-sane-backends
 
 %end

fedora-live-python-classroom.ks

@@ -8,4 +8,4 @@
 %include fedora-python-classroom-gnome-common.ks
 
 # https://bugzilla.redhat.com/show_bug.cgi?id=1695796
-part / --size 8192
+part / --size 7168

fedora-live-robotics.ks

@@ -1,6 +1,5 @@
-# Maintained by x3mboy and the Fedora Robotics SIG:
-# https://fedoraproject.org/wiki/SIGs/Robotics
-# mailto:x3mboy@fedoraproject.org
+# Maintained by the Fedora Robotics SIG:
+# http://fedoraproject.org/wiki/SIGs/Robotics
 # mailto:robotics@lists.fedoraproject.org
 
 %include fedora-live-base.ks
@@ -11,8 +10,7 @@ part / --size 10752
 
 %packages
 # Start with GNOME
-# Install workstation-product-environment to resolve RhBug:1891500
-@^workstation-product-environment
+@gnome-desktop
 
 # Add robotics development packages
 @robotics-suite
@@ -29,13 +27,9 @@ mercurial
 -@graphical-internet
 -@games
 -@sound-and-video
--@dial-up
--@input-methods
--@standard
--@container-management
--@libreoffice
--@networkmanager-submodules
--@workstation-product
+
+# Add a web browser
+firefox
 
 # Remove office suite
 -libreoffice-*
@@ -47,11 +41,9 @@ mercurial
 # Drop things that pull in perl
 -linux-atm
 
-# No printing or scanning
+# No printing
 -foomatic-db-ppds
 -foomatic
--sane-backends-drivers-scanners
--libsane-hpaio
 
 # Dictionaries are big
 -aspell-*
@@ -68,6 +60,7 @@ mercurial
 -krb5-auth-dialog
 -krb5-workstation
 -pam_krb5
+-quota
 -nano
 -dos2unix
 -finger
@@ -76,8 +69,10 @@ mercurial
 -mtr
 -pinfo
 -rsh
+-nfs-utils
 -ypbind
 -yp-tools
+-rpcbind
 -acpid
 -ntsysv
 
@@ -90,9 +85,9 @@ mercurial
 
 %end
 
+# Rip the post-configuration from the live-desktop, set default shortcuts to IDEs 
 %post
-# Extend the post-configuration from the live-desktop, set default shortcuts to IDEs
-cat >> /var/lib/livesys/livesys-session-extra << EOF
+cat >> /etc/rc.d/init.d/livesys << EOF
 # disable screensaver locking
 cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.screensaver.gschema.override << FOE
 [org.gnome.desktop.screensaver]
@@ -105,6 +100,12 @@ cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.lockdown.gschema.override <
 disable-lock-screen=true
 FOE
 
+# disable updates plugin
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
 # make the installer show up
 if [ -f /usr/share/applications/liveinst.desktop ]; then
   # Show harddisk install in shell dash
@@ -114,7 +115,7 @@ if [ -f /usr/share/applications/liveinst.desktop ]; then
 
   cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
 [org.gnome.shell]
-favorite-apps=['firefox.desktop', 'org.qt-project.qtcreator.desktop', 'arduino.desktop', 'gnome-terminal.desktop','nautilus.desktop', 'anaconda.desktop']
+favorite-apps=['firefox.desktop', 'eclipse.desktop', 'arduino.desktop', 'gnome-terminal.desktop','nautilus.desktop', 'anaconda.desktop']
 FOE
 
 fi
@@ -122,5 +123,17 @@ fi
 # rebuild schema cache with any overrides we installed
 glib-compile-schemas /usr/share/glib-2.0/schemas
 
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
 EOF
 %end

fedora-live-scientific_kde.ks

@@ -13,7 +13,7 @@
 %include fedora-scientific-common.ks
 
 # The recommended part size for DVDs is too close to use for the scientific spin
-part / --size 15000
+part / --size 14500
 
 %post
 

fedora-live-security.ks

@@ -6,7 +6,6 @@
 # Maintainers:
 #   Fabian Affolter <fab [AT] fedoraproject <dot> org>
 #   Joerg Simon <jsimon [AT] fedoraproject <dot> org>
-#   JT Pennington <jt [AT] fedoraproject <dot> org>
 # Acknowledgements:
 #   Fedora LiveCD Xfce Spin team - some work here was and will be inherited,
 #   many thanks, especially to Christoph Wickert!
@@ -22,9 +21,7 @@
 part / --size 10240
 
 %packages
-# install env-group to resolve RhBug:1891500
-@^xfce-desktop-environment
-
+@xfce-desktop
 @xfce-apps
 
 # Security tools
@@ -45,7 +42,6 @@ gnome-keyring-pam
 -foomatic-db-ppds
 -foomatic
 -stix-fonts
--default-fonts-core-math
 -ibus-typing-booster
 -xfce4-sensors-plugin
 -man-pages-*
@@ -103,7 +99,50 @@ PREFERRED=/usr/bin/startxfce4
 DISPLAYMANAGER=/usr/sbin/lightdm
 EOF
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="xfce"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+mkdir -p /home/liveuser/.config/xfce4
+
+cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
+MailReader=sylpheed-claws
+FileManager=Thunar
+WebBrowser=midori
+FOE
+
+# disable screensaver locking (#674410)
+cat >> /home/liveuser/.xscreensaver << FOE
+mode:           off
+lock:           False
+dpmsEnabled:    False
+FOE
+
+# deactivate xfconf-migration (#683161)
+rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
+
+# deactivate xfce4-panel first-run dialog (#693569)
+mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
+cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Xfce as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
+
+# and mark it as executable (new Xfce security feature)
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
 
 %end

fedora-live-soas.ks

@@ -4,8 +4,7 @@
 # - A Sugar environment that you can carry in your pocket
 #
 # Maintainers:
-# - Chihurumnaya Ibiam <ibiamchihurumnaya AT gmail DOT com>
-# - Alex Perez <aperez AT alexperez DOT com>
+# - Peter Robinson <pbrobinson AT gmail DOT com>
 
 %include fedora-live-base.ks
 %include fedora-live-minimization.ks
@@ -13,7 +12,37 @@
 
 %post
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="soas"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Sugar as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=sugar/' /etc/lightdm/lightdm.conf
+EOF
+
+cat >> /etc/rc.d/init.d/livesys-late << EOF
+
+# disable screensaver locking
+cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.screensaver.gschema.override << FOE
+[org.gnome.desktop.screensaver]
+lock-enabled=false
+FOE
+
+# and hide the lock screen option
+cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.lockdown.gschema.override << FOE
+[org.gnome.desktop.lockdown]
+disable-lock-screen=true
+FOE
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+EOF
+
+chmod 755 /etc/rc.d/init.d/livesys-late
+/sbin/restorecon /etc/rc.d/init.d/livesys-late
+/sbin/chkconfig --add livesys-late
 
 %end

fedora-live-sway.ks

@@ -1,32 +0,0 @@
-# fedora-livecd-sway.ks
-#
-# Description:
-# - Fedora Live Spin with the tiling window manager Sway
-#
-# Maintainer(s):
-# - Aleksei Bavshin         <alebastr89@gmail.com>
-# - Jiří Konečný            <jkonecny@redhat.com>
-# - Anthony Rabbito         <hello@anthonyrabbito.com>
-# - Fabio Alessandro Locati <me@fale.io>
-
-%include fedora-live-base.ks
-%include fedora-live-minimization.ks
-%include fedora-sway-common.ks
-
-%packages
-# To be able to show installation instructions on background
-nwg-wrapper
-%end
-
-%post
-# create /etc/sysconfig/desktop (needed for installation)
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/sway
-DISPLAYMANAGER=/bin/sddm
-EOF
-
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="sway"/' /etc/sysconfig/livesys
-
-%end
-

fedora-live-workstation.ks

@@ -10,16 +10,87 @@
 #
 #include snippets/packagekit-cached-metadata.ks
 
-part / --size 7750
-
-%packages
-gnome-initial-setup
-anaconda-webui
-%end
+part / --size 6656
 
 %post
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="gnome"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+
+# disable gnome-software automatically downloading updates
+cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
+[org.gnome.software]
+download-updates=false
+FOE
+
+# don't autostart gnome-software session service
+rm -f /etc/xdg/autostart/gnome-software-service.desktop
+
+# disable the gnome-software shell search provider
+cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
+DefaultDisabled=true
+FOE
+
+# don't run gnome-initial-setup
+mkdir ~liveuser/.config
+touch ~liveuser/.config/gnome-initial-setup-done
+
+# suppress anaconda spokes redundant with gnome-initial-setup
+cat >> /etc/sysconfig/anaconda << FOE
+[NetworkSpoke]
+visited=1
+
+[PasswordSpoke]
+visited=1
+
+[UserSpoke]
+visited=1
+FOE
+
+# make the installer show up
+if [ -f /usr/share/applications/liveinst.desktop ]; then
+  # Show harddisk install in shell dash
+  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
+  # need to move it to anaconda.desktop to make shell happy
+  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
+
+  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
+[org.gnome.shell]
+favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
+FOE
+
+  # Make the welcome screen show up
+  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
+    mkdir -p ~liveuser/.config/autostart
+    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
+    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
+  fi
+
+  # Copy Anaconda branding in place
+  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
+    cp -a /usr/share/lorax/product/* /
+  fi
+fi
+
+# rebuild schema cache with any overrides we installed
+glib-compile-schemas /usr/share/glib-2.0/schemas
+
+# set up auto-login
+cat > /etc/gdm/custom.conf << FOE
+[daemon]
+AutomaticLoginEnable=True
+AutomaticLogin=liveuser
+FOE
+
+# Turn off PackageKit-command-not-found while uninstalled
+if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
+  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
+fi
+
+# make sure to set the right permissions and selinux contexts
+chown -R liveuser:liveuser /home/liveuser/
+restorecon -R /home/liveuser/
+
+EOF
 
 %end

fedora-live-xfce.ks

@@ -13,9 +13,6 @@
 %include fedora-live-minimization.ks
 %include fedora-xfce-common.ks
 
-# need a bigger /
-part / --size 6144
-
 %post
 # xfce configuration
 
@@ -26,8 +23,54 @@ PREFERRED=/usr/bin/startxfce4
 DISPLAYMANAGER=/usr/sbin/lightdm
 EOF
 
-# set livesys session type
-sed -i 's/^livesys_session=.*/livesys_session="xfce"/' /etc/sysconfig/livesys
+cat >> /etc/rc.d/init.d/livesys << EOF
+
+mkdir -p /home/liveuser/.config/xfce4
+
+cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
+MailReader=sylpheed-claws
+FileManager=Thunar
+WebBrowser=firefox
+FOE
+
+# disable screensaver locking (#674410)
+cat >> /home/liveuser/.xscreensaver << FOE
+mode:           off
+lock:           False
+dpmsEnabled:    False
+FOE
+
+# deactivate xfconf-migration (#683161)
+rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
+
+# deactivate xfce4-panel first-run dialog (#693569)
+mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
+cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
+
+# set up lightdm autologin
+sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
+sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
+#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
+
+# set Xfce as default session, otherwise login will fail
+sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
+
+# Show harddisk install on the desktop
+sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
+mkdir /home/liveuser/Desktop
+cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
+
+# no updater applet in live environment
+rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
+
+# and mark it as executable (new Xfce security feature)
+chmod +x /home/liveuser/Desktop/liveinst.desktop
+
+# this goes at the end after all other changes. 
+chown -R liveuser:liveuser /home/liveuser
+restorecon -R /home/liveuser
+
+EOF
 
 %end
 

fedora-lxde-common.ks

@@ -8,12 +8,14 @@
 
 %packages
 ### LXDE desktop
-# install env-group to resolve RhBug:1891500
-@^lxde-desktop-environment
-
+@lxde-desktop
 @lxde-apps
 @lxde-media
 @lxde-office
+@networkmanager-submodules
+
+# FIXME: can be omitted once comps is updated
+midori
 
 # pam-fprint causes a segfault in LXDM when enabled
 -fprintd-pam
@@ -37,7 +39,6 @@ metacity
 #-words
 
 # save some space
--@admin-tools
 -autofs
 -acpid
 -gimp-help
@@ -46,7 +47,6 @@ metacity
 -foomatic-db-ppds
 -foomatic
 -stix-fonts
--default-fonts-core-math
 -ibus-typing-booster
 -xscreensaver-extras
 #-wqy-zenhei-fonts           # FIXME: Workaround to save space, do this in comps

fedora-lxqt-common.ks

@@ -9,11 +9,10 @@
 #
 
 %packages
-# install env-group to resolve RhBug:1891500
-@^lxqt-desktop-environment
-
+@lxqt
 @lxqt-apps
 @lxqt-media
+@networkmanager-submodules
 
 # for nm applet
 gnome-keyring
@@ -39,12 +38,11 @@ wqy-microhei-fonts          # a compact CJK font, to replace:
 -adobe-source-han-sans-cn-fonts     # simplified Chinese
 -adobe-source-han-sans-tw-fonts     # traditional Chinese
 
--pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
+-paratype-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
 #-stix-fonts        # mathematical symbols
 
 # remove input methods to free space
 -@input-methods
--@admin-tools
 -scim*
 -m17n*
 # Temporary include ibus to workaround RHBZ 1633225

fedora-mate-common.ks

@@ -1,8 +1,5 @@
 %packages
-# install env-group to resolve RhBug:1891500
-@^mate-desktop-environment
-
-fedora-release-matecompiz
+@mate
 compiz
 compiz-plugins-main
 compiz-plugins-extra
@@ -16,16 +13,15 @@ simple-ccsm
 emerald-themes
 emerald
 fusion-icon
+@networkmanager-submodules
+
+# some apps from mate-applications
+caja-actions
+mate-disk-usage-analyzer
 
 # blacklist applications which breaks mate-desktop
 -audacious
 
-# see https://bugzilla.redhat.com/show_bug.cgi?id=2068699
-# and https://bugzilla.redhat.com/show_bug.cgi?id=1933494
-# use earlyoom instead of systemd-oomd-defaults
-earlyoom
--systemd-oomd-defaults
-
 # office
 @libreoffice
 
@@ -38,16 +34,15 @@ nss-mdns
 
 # Drop things for size
 -@3d-printing
--@admin-tools
 -brasero
 -fedora-icon-theme
 -gnome-icon-theme
 -gnome-icon-theme-symbolic
--gnome-logs
 -gnome-software
 -gnome-user-docs
 
 -@mate-applications
+-mate-icon-theme-faenza
 
 # Help and art can be big, too
 -gnome-user-docs

fedora-minimal-common.ks

@@ -1,5 +1,4 @@
 %packages
-microdnf
 -@standard
 -initial-setup-gui
 -generic-release*

fedora-modular-arm-server.ks

@@ -0,0 +1,27 @@
+%include fedora-arm-base.ks
+
+# server defaults to xfs for / so lets do so on arm also
+part / --size=2500 --fstype xfs
+
+%packages
+# install the default groups for the server evironment since installing the environment is not working
+@server-product
+@standard
+@headless-management
+@container-management
+@domain-client
+-initial-setup-gui
+-generic-release*
+fedora-modular-release
+%end
+
+%post
+
+# setup systemd to boot to the right runlevel
+echo -n "Setting default runlevel to multiuser text mode"
+rm -f /etc/systemd/system/default.target
+ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
+echo .
+
+%end
+

fedora-modular-disk-minimal.ks

@@ -2,12 +2,12 @@ text
 lang en_US.UTF-8
 keyboard us
 timezone US/Eastern
+auth --useshadow --passalgo=sha512
 selinux --enforcing
 # Disabled for modular compose (for now)
 #firewall --enabled --service=mdns
 # Disabled for modular compose (for now)
-#services --enabled=sshd,chronyd,initial-setup
-services --enabled=NetworkManager
+#services --enabled=sshd,NetworkManager,chronyd,initial-setup
 network --bootproto=dhcp --device=link --activate
 rootpw --lock --iscrypted locked
 shutdown
@@ -35,8 +35,9 @@ microdnf
 glibc-minimal-langpack
 grubby
 kernel
+libcrypt
 sssd-client
-@networkmanager-submodules
+dhcp-client
 -fedora-logos
 -coreutils
 -dosfstools
@@ -54,17 +55,13 @@ sssd-client
 
 %post
 
-# Find the architecture we are on
-arch=$(uname -m)
 # Setup Raspberry Pi firmware
-if [[ $arch == "aarch64" ]]; then
-cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
-fi
+cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
 
-releasever=$(rpm --eval '%{fedora}')
+releasever=$(rpm -q --qf '%{version}\n' fedora-modular-release)
 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
 echo "Packages within this disk image"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
+rpm -qa
 # Note that running rpm recreates the rpm db files which aren't needed or wanted
 rm -f /var/lib/rpm/__db*
 

fedora-neuro-gnome-common.ks

@@ -1,30 +0,0 @@
-# Description: Common gnome based configuration for NeuroFedora spin images.
-#
-# Maintained by the NeuroFedora SIG:
-# https://neuro.fedoraproject.org
-# mailto:neuro-sig@lists.fedoraproject.org
-
-# Please specify the individual package sets in their own ks files:
-# - fedora-comp-neuro-common.ks
-
-%packages
-@firefox
-
-# Editors
-emacs
-vim-X11
-
-# This is no longer workstation
--@workstation-product
-
-# No Workstation backgrounds
-#-desktop-backgrounds-basic
-#-*backgrounds-extras
-%end
-
-%post
-
-#Override the favorite desktop application in Dash
-sed -i "s/favorite-apps=."'*'"/favorite-apps=['firefox.desktop', 'org.gnome.Terminal.desktop', 'org.gnome.Nautilus.desktop', 'org.gnome.gedit.desktop', 'anaconda.desktop']/" /etc/rc.d/init.d/livesys
-
-%end

fedora-phosh-common.ks

@@ -1,13 +0,0 @@
-# fedora-phosh-common.ks
-#
-# Description:
-# - Fedora Disk image Spin with the phosh window manager
-#
-# Maintainer(s):
-# - Kevin Fenzi       <kevin@scrye.com>
-
-%packages
-# install env-group to resolve RhBug:1891500
-@^phosh-desktop-environment
-
-%end

fedora-python-classroom-common.ks

@@ -13,34 +13,12 @@ vim-enhanced
 wget
 
 # Remove Pythons possibly recommended by tox
--python2
 -python26
--python27
 -python33
 -python34
 -python35
 -python36
--python37
 -python38
--python2.7
--python3.5
--python3.6
--python3.7
--python3.8
--python3.9
--python3.10
--python3.11
 -pypy
 
-# Remove LaTeX, see https://bugzilla.redhat.com/show_bug.cgi?id=1862450
-#               and https://bugzilla.redhat.com/show_bug.cgi?id=1902354
--texlive-base
--texlive-latex
-
-# Remove gdal recommended by networkx, brings in close to 600M of proj data
-# Also explicitly list proj to make sure both packages are gone
-# https://lists.fedoraproject.org/archives/list/python-devel@lists.fedoraproject.org/thread/LGC5IMMHZ4DM7GQNPAFC6GU362PPTN7O/
--python3-gdal
--proj
-
 %end

fedora-python-classroom-gnome-common.ks

@@ -7,6 +7,7 @@
 %include fedora-python-classroom-common.ks
 
 %packages
+ninja-ide
 emacs
 python3-matplotlib-tk
 python3-pillow-tk
@@ -35,9 +36,6 @@ python3-pillow-tk
 # This is no longer workstation
 -@workstation-product
 
-# But we want to keep the Fedora desktop backgrounds
-desktop-backgrounds-gnome
-
 # Add a web browser
 @firefox
 
@@ -48,7 +46,7 @@ desktop-backgrounds-gnome
 
 # Drop the Java plugin and Java
 -icedtea-web
--*openjdk*
+-java*
 
 # No printing
 -@printing
@@ -61,6 +59,7 @@ desktop-backgrounds-gnome
 
 # Help and art can be big, too
 -gnome-user-docs
+-gnome-getting-started-docs
 -desktop-backgrounds-basic
 -*backgrounds-extras
 
@@ -93,9 +92,6 @@ desktop-backgrounds-gnome
 -system-config-services
 -policycoreutils-gui
 
-# Inkscape is too big to be included
--inkscape
-
 %end
 
 

fedora-repo.ks

@@ -3,7 +3,7 @@
 # Exactly one of the following should be uncommented
 
 # For the master branch the following should be uncommented
-%include fedora-repo-rawhide.ks
+# %include fedora-repo-rawhide.ks
 
 # For non-master branches the following should be uncommented
-# %include fedora-repo-not-rawhide.ks
+%include fedora-repo-not-rawhide.ks

fedora-scientific-common.ks

@@ -4,9 +4,9 @@
 @engineering-and-scientific
 
 # scilab
-## scilab
-## scilab-devel
-## scilab-doc
+scilab
+scilab-devel
+scilab-doc
 
 # Remove sagemath explicitly?
 -sagemath
@@ -43,7 +43,7 @@ python3-networkx
 python3-pandas
 
 # matplotlib backends
-python3-matplotlib-qt5
+python3-matplotlib-qt4
 python3-matplotlib-tk
 
 # Include Java development tools
@@ -56,17 +56,21 @@ gcc-gfortran
 # GUI for R
 rkward
 
+# GUI for Octave
+#qtoctave
+
 # julia
-julia
-julia-doc
-julia-devel
+# Comment out till build failure is sorted
+# julia
+# julia-doc
 
-# FTI with Python 3.12:
-# https://bugzilla.redhat.com/show_bug.cgi?id=2220598
-# can be restored when that is fixed
-#python3-spyder
-python3-spyder-kernels
+# IDEs for the IDE folks
+@eclipse
 
+# Workaround for https://pagure.io/releng/issue/7814
+-eclipse-linuxtools-vagrant
+
+#spyder
 
 #writing & publishing
 emacs
@@ -87,8 +91,8 @@ openmpi
 openmpi-devel
 valgrind-openmpi
 libgomp
+mpi4py-openmpi
 python3-mpi4py-openmpi
-python3-mpi4py-mpich
 
 #Version control- a GUI for each as well
 
@@ -110,6 +114,7 @@ libotf
 #root
 root
 root-gui-fitpanel
+root-python
 
 #Multiple jobs/clustering system
 # torque
@@ -125,8 +130,8 @@ dia
 inkscape
 xzgv
 gimp
-## ggobi
-## ggobi-devel
+ggobi
+ggobi-devel
 #g3data
 #Mayavi
 
@@ -135,7 +140,9 @@ screen
 tmux
 rlwrap
 hexchat
+shutter
 fig2ps
+bibtex2html
 hevea
 
 #Include Mozilla Firefox

fedora-server-vm-full.ks

@@ -1,201 +0,0 @@
-# fedora-server-vm-full.ks (rel. 1.02)
-# Kickstart file to build a Fedora Server Edition VM disk image.
-# The image aims to resemble as close as technically possible the
-# full features of a Fedora Server Edition in a virtual machine.
-#
-# The image uses GPT partition type as of default in Fedora 37.
-#
-# At first boot it opens a text mode basic configuration screen.
-#
-# This kickstart file is designed to be used with ImageFactory (in Koji).
-#
-# To build the image locally, you need to install ImageFactory and
-# various additional helpers and configuration files.
-# See Fedora Server Edition user documentation tutorial.
-
-# Use text mode install
-text
-
-# Keyboard layouts
-keyboard 'us'
-
-# System language
-lang en_US.UTF-8
-
-# System timezone
-# set time zone to GMT (Etcetera/UTC)
-timezone Etc/UTC --utc
-
-
-# Root password
-rootpw --iscrypted --lock locked
-
-# SELinux configuration
-selinux --enforcing
-
-
-# System bootloader configuration
-bootloader --location=mbr --timeout=1 --append="console=tty1 console=ttyS0,115200n8"
-
-# Network information
-network  --bootproto=dhcp --device=link --activate --onboot=on
-
-# Firewall configuration
-firewall --enabled --service=mdns
-
-
-# System services
-services --enabled="sshd,NetworkManager,chronyd,initial-setup"
-
-# Run the Setup Agent on first boot
-firstboot --reconfig
-
-# Partition Information. Use GPT by default (since Fedora 37)
-# Resemble the Partitioning used for Fedora Server Install media
-clearpart --all --initlabel --disklabel=gpt
-reqpart --add-boot
-part pv.007     --size=4000  --grow
-volgroup  sysvg  pv.007
-logvol / --vgname=sysvg --size=4000 --grow --maxsize=16000 --fstype=xfs --name=root --label=sysroot
-
-
-# Include URLs for network installation dynamically, dependent on Fedora release
-# and imagefactory runtime environment
-%include fedora-repo.ks
-
-# Shutdown after installation
-shutdown
-
-
-
-##### begin package list #############################################
-%packages --inst-langs=en
-
-@server-product
-@core
-@headless-management
-@standard
-@networkmanager-submodules
-# container management is an optional install item on disk media.
-# Install options not available with VMs. So we don't include it
-# despite trying to resemble a DVD installation as close as possible.
-##@container-management
-@domain-client
-@guest-agents
-
-# All arm-tools packages install on aarch64/armhfp only
-# TODO: on a x86_64 devel environment are @arm-tools not available
-# and cause a build error.
-# @arm-tools
-
-# Standard Fedora Package Groups
-## dracut-config-generic  ## included in =core=
-glibc-all-langpacks
-initial-setup
-kernel-core
--dracut-config-rescue
--generic-release*
--initial-setup-gui
--kernel
--linux-firmware
--plymouth
-# pulled in by @standard
--smartmontools
--smartmontools-selinux
-
-%end
-##### end package list ###############################################
-
-
-##### begin kickstart post script ####################################
-%post --erroronfail  --log=/root/anaconda-post-1.log
-
-# Find the architecture we are on
-arch=$(uname -m)
-
-# Import RPM GPG key, during installation saved in /etc/pki
-echo "Import RPM GPG key"
-releasever=$(rpm --eval '%{fedora}')
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
-
-# See the systemd-random-seed.service man page that says:
-#   " It is recommended to remove the random seed from OS images intended
-#     for replication on multiple systems"
-# The newly installed instance should make it's own
-echo "Removing random-seed so it's not the same in every image."
-rm -f /var/lib/systemd/random-seed
-
-# When we build the image a networking config file gets left behind.
-# Let's clean it up.
-echo "Cleanup leftover networking configuration"
-rm -f /etc/NetworkManager/system-connections/*.nmconnection
-
-# Truncate the /etc/resolv.conf left over from NetworkManager during the
-# kickstart because the DNS server is environment specific.
-truncate -s 0 /etc/resolv.conf
-
-echo "Cleaning repodata to save space."
-dnf clean all
-
-# linux-firmware is installed by default and is quite large. As of mid 2020:
-#   Total download size: 97 M
-#   Installed size: 268 M
-# Not needed in virtual environment.
-echo "Removing linux-firmware package."
-rpm -e linux-firmware
-
-# Will ever anybody see this?
-echo "Packages within this disk image"
-rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
-
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-
-# Do we need a serial terminal with a VM?
-if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
- # Anaconda adds console=tty0 to the grub boot line on all images. this is problematic
- # when you are using fedora via serial console as you do not get any output post grub
- # linux does a good job of knowing what consoles need to be enabled.
- # https://bugzilla.redhat.com/show_bug.cgi?id=2022757
- sed -i -e 's|console=tty0||g' /boot/loader/entries/*conf
-fi
-
-
-# Remove machine-id on pre generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-##### end kickstart post script #####################################
-
-
-##### begin custom post script (after base) #########################
-%post
-
-# When we build the image /var/log gets populated.
-# Let's clean it up.
-echo "Cleanup leftover in /var/log"
-cd /var/log  && find . -name \* -type f -delete 
-
-echo "Zeroing out empty space."
-# Create zeros file with nodatacow and no compression
-touch /var/tmp/zeros
-chattr +C /var/tmp/zeros
-# This forces the filesystem to reclaim space from deleted files
-dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
-echo "(Don't worry -- that out-of-space error was expected.)"
-# Force sync to disk
-sync /
-rm -f /var/tmp/zeros
-sync /
-
-# setup systemd to boot to the right runlevel
-echo -n "Setting default runlevel to multiuser text mode"
-rm -f /etc/systemd/system/default.target
-ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-echo .
-
-%end
-##### end custom post script ########################################

fedora-soas-common.ks

@@ -4,20 +4,11 @@
 # - A Sugar environment that you can carry in your pocket
 #
 # Maintainers:
-# - Chihurumnaya Ibiam <ibiamchihurumnaya AT gmail DOT com>
-# - Alex Perez <aperez AT alexperez DOT com>
+# - Peter Robinson <pbrobinson AT gmail DOT com>
 
 firewall --enabled --service=mdns,presence
 
 %packages
-# install env-group to resolve RhBug:1891500
-@^sugar-desktop-environment
-
-# == Core Sugar Platform ==
-fedora-release-soas
-
-# explicitly remove a bunch of extra stuff
--openbox
 -@fonts
 -@dial-up
 -@multimedia
@@ -39,11 +30,7 @@ fedora-release-soas
 -abrt-cli
 -ibus*
 -hyperv-daemons
--sane-backends
--sane-backends-drivers-scanners
--dhcp-client
--gcc-gdb-plugin
--gcc
+-webkit2gtk3-plugin-process-gtk2
 
 # Add some extra fonts
 dejavu-sans-fonts
@@ -53,6 +40,38 @@ aajohan-comfortaa-fonts
 sil-abyssinica-fonts
 vlgothic-fonts
 
+# == Core Sugar Platform ==
+@sugar-desktop
+-sugar-ruler
+sugar-cp-updater
+lightdm
+lightdm-gtk
+
+# Write breaks unless we do this (we don't need it anyway)
+# enable for testing in the F17 dev cycle
+@input-methods
+
+# Needed for wifi, bluetooth and WWAN connection support
+@networkmanager-submodules
+
+# == Platform Components ==
+# from http://wiki.sugarlabs.org/go/0.94/Platform_Components
+alsa-plugins-pulseaudio
+alsa-utils
+gstreamer1-plugins-base
+gstreamer1-plugins-good
+gstreamer1-plugins-bad-free
+gstreamer-plugins-espeak
+pulseaudio
+pulseaudio-utils
+
+# explicitly remove openbox and hopefully deal with what firstboot wants
+-openbox
+
+# remove deps that come from god knows where
+-sane-backends
+-sane-backends-drivers-scanners
+
 # Usefulness for DSL connections as per:
 # http://bugs.sugarlabs.org/ticket/1951
 rp-pppoe
@@ -64,25 +83,63 @@ livecd-tools
 # Get the Sugar boot screen
 -plymouth-system-theme
 -plymouth-theme-charge
+sugar-logos
 
 %end
 
 %post
 
+# Rebuild initrd for Sugar boot screen
+KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
+/usr/sbin/plymouth-set-default-theme sugar
+dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
+
+# Note that running rpm recreates the rpm db files which aren't needed or wanted
+rm -f /var/lib/rpm/__db*
+
 # Get proper release naming in the control panel
 cat >> /boot/olpc_build << EOF
 Sugar on a Stick
 EOF
 cat /etc/fedora-release >> /boot/olpc_build
 
-# Rebuild initrd for Sugar boot screen
-KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
-/usr/sbin/plymouth-set-default-theme sugar
-sed -i -r 's/(omit_dracutmodules\+\=.*) plymouth (.*)/\1 \2/' /etc/dracut.conf.d/99-liveos.conf
-dracut --force-add plymouth -N -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
-
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
+# Add our activities to the favorites
+cat > /usr/share/sugar/data/activities.defaults << EOF
+org.laptop.WebActivity
+org.laptop.HelpActivity
+org.laptop.Chat
+org.laptop.sugar.ReadActivity
+org.laptop.sugar.GetBooksActivity
+org.laptop.AbiWordActivity
+org.laptop.TurtleArtActivity
+org.laptop.Calculate
+org.laptop.Clock
+org.laptop.ImageViewerActivity
+org.laptop.Memorize
+org.laptop.physics
+org.laptop.Pippy
+org.laptop.RecordActivity
+org.laptop.Oficina
+org.laptop.StopWatchActivity
+org.laptop.community.Finance
+org.laptop.community.TypingTurtle
+org.laptop.sugar.Jukebox
+org.laptop.Words
+org.eq.FotoToon
+org.gnome.Labyrinth
+com.laptop.Ruler
+org.sugarlabs.AbacusActivity
+org.sugarlabs.IRC
+org.sugarlabs.InfoSlicer
+org.sugarlabs.PortfolioActivity
+org.sugarlabs.StoryActivity
+org.sugarlabs.VisualMatchActivity
+com.garycmartin.Moon
+mulawa.Countries
+tv.alterna.Clock
+vu.lux.olpc.Maze
+vu.lux.olpc.Speak
+EOF
 
 cat > /etc/sysconfig/desktop <<EOF
 PREFERRED=/usr/bin/sugar
@@ -106,18 +163,6 @@ show-logout=false
 [org.sugarlabs.power]
 automatic=true
 EOF
-
 /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas
 
 %end
-
-%post --nochroot
-
-for n in initramfs initrd; do
-    for img in "$LIVE_ROOT/images/pxeboot/$n"* ; do
-        [ -e "$img" ] && cp -a "$INSTALL_ROOT"/boot/initramfs-*.img "$img"
-    done
-done
-
-%end
-

fedora-sway-common.ks

@@ -1,17 +0,0 @@
-# fedora-livecd-sway.ks
-#
-# Description:
-# - Fedora Live Spin with the tiling window manager Sway
-#
-# Maintainer(s):
-# - Aleksei Bavshin         <alebastr89@gmail.com>
-# - Jiří Konečný            <jkonecny@redhat.com>
-# - Anthony Rabbito         <hello@anthonyrabbito.com>
-# - Fabio Alessandro Locati <me@fale.io>
-
-%packages
-fedora-release-sway
-@^sway-desktop-environment
-@firefox
-@swaywm-extended
-%end

fedora-workstation-common.ks

@@ -5,8 +5,20 @@
 -@input-methods
 -@standard
 
-# Install workstation-product-environment to resolve RhBug:1891500
-@^workstation-product-environment
+# Make sure to sync any additions / removals done here with
+# workstation-product-environment in comps
+@base-x
+@core
+@firefox
+@fonts
+@gnome-desktop
+@guest-desktop-agents
+@hardware-support
+@libreoffice
+@multimedia
+@networkmanager-submodules
+@printing
+@workstation-product
 
 # Exclude unwanted packages from @anaconda-tools group
 -gfs2-utils

fedora-xfce-common.ks

@@ -4,22 +4,31 @@
 # - Fedora Live Spin with the light-weight XFCE Desktop Environment
 #
 # Maintainer(s):
+# - Rahul Sundaram    <sundaram@fedoraproject.org>
+# - Christoph Wickert <cwickert@fedoraproject.org>
 # - Kevin Fenzi       <kevin@tummy.com>
 # - Adam Miller       <maxamillion@fedoraproject.org>
-# - Mukundan Ragavan  <nonamedotc@fedoraproject.org>
+
 
 %packages
 
-fedora-release-xfce
-# install env-group to resolve RhBug:1891500
-@^xfce-desktop-environment
-
+@networkmanager-submodules
+@xfce-desktop
 @xfce-apps
 @xfce-extra-plugins
 @xfce-media
 @xfce-office
 
+# unlock default keyring. FIXME: Should probably be done in comps
+gnome-keyring-pam
+# Admin tools are handy to have
+@admin-tools
+# Add some screensavers, people seem to like them
+# Note that blank is still default.
+xscreensaver-extras
 wget
+# Better more popular browser
+#firefox
 system-config-printer
 
 # save some space
@@ -29,6 +38,5 @@ system-config-printer
 -desktop-backgrounds-basic
 -aspell-*                   # dictionaries are big
 -xfce4-sensors-plugin
--xfce4-eyes-plugin
 
 %end

l10n/fedora-livecd-lxde-ja_JP.ks

@@ -26,7 +26,7 @@ imsettings
 %end
 
 %post
-cat >> /var/lib/livesys/livesys-session-extra << EOF
+cat >> /etc/rc.d/init.d/livesys << EOF
 #### setting env and start ibus-deamon ####
 #mkdir /home/liveuser
 cat >> /home/liveuser/.bash_profile << FOE

maintainers.toml

@@ -1,131 +0,0 @@
-[spins.lxqt.x86_64]
-fas = [ "lupinix", "zsun" ]
-maintainers = [ "Christian Dersch", "Zamir SUN" ]
-[spins.lxqt.armhfp]
-fas = [ "lupinix", "zsun" ]
-maintainers = [ "Christian Dersch", "Zamir SUN" ]
-
-[spins.xfce.x86_64]
-fas = [ "nonamedotc", "kevin", "maxamillion" ]
-maintainers = [ "Mukundan Ragavan", "Kevin Fenzi", "Adam Miller" ]
-[spins.xfce.armhfp]
-fas = [ "nonamedotc", "kevin", "maxamillion" ]
-maintainers = [ "Mukundan Ragavan", "Kevin Fenzi", "Adam Miller" ]
-
-[spins.kde.x86_64]
-fas = [ "rdieter", "marcdeop", "ngompa" ]
-maintainers = [ "Rex Dieter", "Marc Deop", "Neal Gompa" ]
-
-[spins.cinnamon.x86_64]
-fas = [ "grinnz" ]
-maintainers = [ "Dan Book" ]
-
-[spins.lxde.x86_64]
-fas = [ "cwickert", "mtasaka" ]
-maintainers = [ "Christoph Wickert", "Mamoru TASAKA" ]
-[spins.lxde.armhfp]
-fas = [ "cwickert", "mtasaka" ]
-maintainers = [ "Christoph Wickert", "Mamoru TASAKA" ]
-
-[spins.soas.x86_64]
-fas = [ "chimosky", "aperezbios" ]
-maintainers = [ "Chihurumnaya Ibiam", "Alex Perez" ]
-[spins.soas.armhfp]
-fas = [ "chimosky", "aperezbios", ]
-maintainers = [ "Chihurumnaya Ibiam", "Alex Perez" ]
-
-[labs.astronomy_kde.x86_64]
-fas = [ "lupinix" ]
-maintainers = [ "Christian Dersch" ]
-
-[labs.security.x86_64]
-fas = [ "fab", "jsimon", "q5sys"]
-maintainers = [ "Fabian Affolter", "Joerg Simon", "JT Pennington" ]
-
-[labs.comp_neuro.x86_64]
-fas = [ "bt0dotninja", "dan1mal", "ankursinha", "neuro-sig" ]
-maintainers = [ "Alberto Rodriguez Sanchez", "Danny Lee", "Ankur Sinha", "NeuroFedora SIG" ]
-
-[labs.design_suite.x86_64]
-fas = [ "luya" ]
-maintainers = [ "Luya Tshimbalanga" ]
-
-[labs.games.x86_64]
-fas = [ "dagostinelli", "richardanaya" ]
-maintainers = [ "Darryl T. Agostinelli", "Richard Anaya" ]
-
-[labs.jam_kde.x86_64]
-fas = [ "q5sys" ]
-maintainers = [ "JT Pennington" ]
-
-[labs.python_classroom.x86_64]
-fas = [ "churchyard", "python-sig" ]
-maintainers = [ "Miro Hrončok", "Python SIG" ]
-
-[labs.scientific_kde.x86_64]
-fas = [ "scitech" ]
-maintainers = [ "SciTech SIG" ]
-
-[labs.scientific.x86_64]
-fas = [ "scitech" ]
-maintainers = [ "SciTech SIG" ]
-
-[labs.robotics.x86_64]
-fas = [ "x3mboy", "robotics-sig" ]
-maintainers = [ "Eduard Lucena", "Robotics SIG" ]
-
-[spins.i3.x86_64]
-fas = [ "jflory7", "defolos", "nasirhm", "odilhao", "x3mboy" ]
-maintainers = [ "Justin Flory", "Dan Čermák", "Nasir Hussain", "Odilon Junior", "Eduard Lucena" ]
-
-[eln]
-fas = [ "sgallagh", "tdawson", "asamalik" ]
-maintainers = [ "Stephen Gallagher", "Troy Dawson", "Adam Samalik" ]
-
-[spins.budgie.x86_64]
-fas = [ "joshstrobl" ]
-maintainers = [ "Joshua Strobl" ]
-
-[spins.sway.x86_64]
-fas = [ "alebastr", "jkonecny", "anthr76", "fale" ]
-maintainers = [ "Aleksei Bavshin", "Jiří Konečný", "Anthony Rabbito", "Fabio Alessandro Locati" ]
-
-[silverblue.x86_64]
-fas = [ "siosm", "tpopela" ]
-maintainers = [ "Timothée Ravier", "Tomáš Popela" ]
-[silverblue.aarch64]
-fas = [ "siosm", "tpopela" ]
-maintainers = [ "Timothée Ravier", "Tomáš Popela" ]
-[silverblue.ppc64le]
-fas = [ "siosm", "tpopela" ]
-maintainers = [ "Timothée Ravier", "Tomáš Popela" ]
-
-[kinoite.x86_64]
-fas = [ "siosm" ]
-maintainers = [ "Timothée Ravier" ]
-[kinoite.aarch64]
-fas = [ "siosm" ]
-maintainers = [ "Timothée Ravier" ]
-[kinoite.ppc64le]
-fas = [ "siosm" ]
-maintainers = [ "Timothée Ravier" ]
-
-[sericea.x86_64]
-fas = [ "alebastr", "jkonecny", "anthr76", "fale" ]
-maintainers = [ "Aleksei Bavshin", "Jiří Konečný", "Anthony Rabbito", "Fabio Alessandro Locati" ]
-[sericea.aarch64]
-fas = [ "alebastr", "jkonecny", "anthr76", "fale" ]
-maintainers = [ "Aleksei Bavshin", "Jiří Konečný", "Anthony Rabbito", "Fabio Alessandro Locati" ]
-[sericea.ppc64le]
-fas = [ "alebastr", "jkonecny", "anthr76", "fale" ]
-maintainers = [ "Aleksei Bavshin", "Jiří Konečný", "Anthony Rabbito", "Fabio Alessandro Locati" ]
-
-[onyx.x86_64]
-fas = [ "joshstrobl" ]
-maintainers = [ "Joshua Strobl" ]
-[onyx.aarch64]
-fas = [ "joshstrobl" ]
-maintainers = [ "Joshua Strobl" ]
-[onyx.ppc64le]
-fas = [ "joshstrobl" ]
-maintainers = [ "Joshua Strobl" ]

tools/nightly-composes

@@ -0,0 +1,159 @@
+#!/bin/bash
+
+TOPDIR=/var/tmp
+
+STATEFILE=$TOPDIR/nightlylivecdstatefile
+# WARNING: MirrorManager must always give this mirror to the host running this script
+STATEPATH=http://infrastructure.fedoraproject.org/pub/fedora/linux/development/13/x86_64/os/repodata/repomd.xml
+
+getdatehash() {
+     DUMP=$(wget --no-cache -S $1 -O /dev/null 2>&1)
+     echo "$DUMP" | grep -q "HTTP/1.1 200 OK"
+     if [ $? -eq 0 ]; then
+         DATE=$(echo "$DUMP"|grep '^  Last-Modified'|sha1sum |awk {'print $1'})
+     else
+         echo "ERROR: $STATEPATH failed."
+         exit 1
+     fi
+}
+getdatehash $STATEPATH
+
+if [ -f $STATEFILE ]; then
+     OLDDATE=$(cat $STATEFILE)
+     if [ "$OLDDATE" == "$DATE" ]; then
+         # No change, exit
+         exit 0
+     fi
+fi
+
+# Save date hash
+echo "$DATE" > $STATEFILE
+echo "Saving date hash: $DATE"
+
+# Check for running livecd-creator and abort if it is running
+if ps -ef |grep -v grep |grep -q livecd-creator; then
+     echo "ERROR: Another livecd-creator is still running.  Aborting."
+     exit 255
+fi
+
+if [ ! -d $TOPDIR/spin-kickstarts/ ]; then
+     cd $TOPDIR
+     git clone http://git.fedorahosted.org/git/spin-kickstarts.git
+fi
+
+# pull any git updates to kickstarts
+
+cd $TOPDIR/spin-kickstarts/
+git reset --hard
+git pull
+
+if [ ! -d $TOPDIR/nightly-composes ]; then
+	mkdir -p $TOPDIR/nightly-composes
+fi
+
+DATE=`date +%Y%m%d.%H`
+
+# remove the previous days compose
+find $TOPDIR/nightly-composes/ -name '*.iso' -exec rm -f '{}' \;
+
+# loop though the valid spins
+for i in `echo desktop design-suite xfce broffice.org kde electronic-lab games lxde soas security`
+do
+
+   cd $TOPDIR/nightly-composes/
+
+   echo $i
+
+   if [ ! -d $TOPDIR/nightly-composes/$i ]; then
+  	mkdir -p $TOPDIR/nightly-composes/$i
+   fi
+   if [ ! -d $TOPDIR/nightly-composes/$i/logs ]; then
+  	mkdir -p $TOPDIR/nightly-composes/$i/logs
+	touch $TOPDIR/nightly-composes/$i/logs/SIZEHISTORY-i386
+	touch $TOPDIR/nightly-composes/$i/logs/SIZEHISTORY-x86_64
+   fi
+
+   cd $i
+
+   # compose f13 not rawhide for now.
+   sed -i 's/rawhide/fedora-13/g' $TOPDIR/spin-kickstarts/*.ks
+
+   # debrand
+   # Note this is not needed for 'official' test spins
+   #sed -i 's/^-fedora-logos/fedora-logos/' $TOPDIR/spin-kickstarts/fedora-livecd-$i.ks
+   #sed -i 's/^generic-logos//' $TOPDIR/spin-kickstarts/fedora-livecd-$i.ks
+
+   echo "INFO: $i i386 live image compose starting"
+   setarch i386 livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f $i-i386-$DATE > logs/$DATE-i386.log 2>&1
+   if [ $? -ne 0 ]; then
+        echo "ERROR: $i i386 live image failed to compose on $DATE"
+	mv logs/$DATE-i386.log logs/$DATE-FAILED-i386.log
+   else
+        du $TOPDIR/nightly-composes/$i/$i-i386-$DATE.iso >> logs/SIZEHISTORY-i386
+        tail -2 logs/SIZEHISTORY-i386
+	rm -f CHECKSUM-i386
+	sha256sum $i-i386-$DATE.iso > CHECKSUM-i386
+        cat CHECKSUM-i386
+        echo "INFO: $i i386 live image compose finished OK"
+   fi
+
+   echo "INFO: $i x86_64 live image compose starting"
+   # Need to shorten the electronic-lab label to the 32 char limit
+   if [ "$i" = "electronic-lab" ]; then
+	livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f e-lab-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
+   else
+   	livecd-creator -c $TOPDIR/spin-kickstarts/fedora-live*-$i.ks -f $i-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
+   fi
+   if [ $? -ne 0 ]; then
+        echo "ERROR: $i x86_64 live image failed to compose on $DATE"
+	mv logs/$DATE-x86_64.log logs/$DATE-FAILED-x86_64.log
+   else
+        if [ "$i" = "electronic-lab" ]; then
+             du $TOPDIR/nightly-composes/$i/e-lab-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
+             tail -2 logs/SIZEHISTORY-x86_64
+	     rm -f CHECKSUM-x86_64
+	     sha256sum e-lab-x86_64-$DATE.iso > CHECKSUM-x86_64
+             cat CHECKSUM-x86_64
+        else
+             du $TOPDIR/nightly-composes/$i/$i-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
+             tail -2 logs/SIZEHISTORY-x86_64
+	     rm -f CHECKSUM-x86_64
+	     sha256sum $i-x86_64-$DATE.iso > CHECKSUM-x86_64
+             cat CHECKSUM-x86_64
+        fi
+        echo "INFO: $i x86_64 live image compose finished OK"
+   fi
+
+   # remove old resize image
+   #rm -f /tmp/resize-image-*
+done
+
+# do aos spin
+echo "INFO: aos i386 live image compose starting"
+cd $TOPDIR/nightly-composes/aos/
+setarch i386 livecd-creator -c $TOPDIR/spin-kickstarts/fedora-aos.ks -f aos-i386-$DATE > logs/$DATE-i386.log 2>&1
+if [ $? -ne 0 ]; then
+        echo "ERROR: aos i386 live image failed to compose on $DATE"
+	mv logs/$DATE-i386.log logs/$DATE-FAILED-i386.log
+else
+        du $TOPDIR/nightly-composes/aos/aos-i386-$DATE.iso >> logs/SIZEHISTORY-i386
+        tail -2 logs/SIZEHISTORY-i386
+	rm -f CHECKSUM-i386
+	sha256sum aos-i386-$DATE.iso > CHECKSUM-i386
+	cat CHECKSUM-i386
+        echo "INFO: aos i386 live image compose finished OK"
+fi
+
+echo "INFO: aos x86_64 live image compose starting"
+livecd-creator -c $TOPDIR/spin-kickstarts/fedora-aos.ks -f aos-x86_64-$DATE    > logs/$DATE-x86_64.log 2>&1
+if [ $? -ne 0 ]; then
+        echo "ERROR: aos x86_64 live image failed to compose on $DATE"
+	mv logs/$DATE-x86_64.log logs/$DATE-FAILED-x86_64.log
+else
+        du $TOPDIR/nightly-composes/aos/aos-x86_64-$DATE.iso >> logs/SIZEHISTORY-x86_64
+        tail -2 logs/SIZEHISTORY-x86_64 
+	rm -f CHECKSUM-x86_64
+	sha256sum aos-x86_64-$DATE.iso > CHECKSUM-x86_64
+        cat CHECKSUM-x86_64
+        echo "INFO: aos x86_64 live image compose finished OK"
+fi