IoT: Update F-30 for stable ostree branch

Signed-off-by: Peter Robinson <pbrobinson@fedoraproject.org>

fedora-arm-base.ks

@@ -44,6 +44,10 @@ initial-setup-gui
 # make sure all the locales are available for inital0-setup and anaconda to work
 glibc-all-langpacks
 
+# this ks uses it in %post, and imgcreate also uses it in the installed
+# system root, so it needs to be there
+chkconfig
+
 %end
 
 %post

fedora-arm-mate.ks

@@ -2,7 +2,7 @@
 %include fedora-arm-xbase.ks
 %include fedora-mate-common.ks
 
-part / --size=6100 --fstype ext4
+part / --size=7168 --fstype ext4
 
 %post
 

fedora-arm-xbase.ks

@@ -4,6 +4,7 @@
 @input-methods
 @multimedia
 @printing
+epiphany
 %end
 
 %post

fedora-cinnamon-common.ks

@@ -14,6 +14,6 @@
 parole
 
 # extra backgrounds
-f29-backgrounds-extras-gnome
+f30-backgrounds-extras-gnome
 
 %end

fedora-cloud-base.ks

@@ -137,7 +137,7 @@ echo "Removing firewalld."
 # not work when package was installed by Anaconda instead of command line.
 # Also -- check if this is still even needed with new anaconda -- disabled
 # firewall should _not_ pull in this package.
-# yum -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
+# dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
 dnf -C -y erase "firewalld*"
 
 # Another one needed at install time but not after that, and it pulls

fedora-cloud-bigdata.ks

@@ -112,12 +112,12 @@ rpm -e linux-firmware
 # Remove firewalld; was supposed to be optional in F18+, but is required to
 # be present for install/image building.
 echo "Removing firewalld."
-yum -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
 
 # Another one needed at install time but not after that, and it pulls
 # in some unneeded deps (like, newt and slang)
 echo "Removing authconfig."
-yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
 
 echo -n "Getty fixes"
 # although we want console output going to the serial console, we don't
@@ -176,10 +176,10 @@ echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed
 
-echo "Cleaning old yum repodata."
-yum history new
-yum clean all
-truncate -c -s 0 /var/log/yum.log
+echo "Cleaning old dnf repodata."
+dnf history new
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
 
 echo "Import RPM GPG key"
 releasever=$(rpm -q --qf '%{version}\n' fedora-release)
@@ -204,7 +204,7 @@ dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
 echo "Fixing SELinux contexts."
 touch /var/log/cron
 touch /var/log/boot.log
-mkdir -p /var/cache/yum
+mkdir -p /var/cache/dnf
 /usr/sbin/fixfiles -R -a restore
 
 echo "Zeroing out empty space."

fedora-cloud-experimental.ks

@@ -103,12 +103,12 @@ rpm -e linux-firmware
 # Remove firewalld; was supposed to be optional in F18+, but is required to
 # be present for install/image building.
 echo "Removing firewalld."
-yum -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
 
 # Another one needed at install time but not after that, and it pulls
 # in some unneeded deps (like, newt and slang)
 echo "Removing authconfig."
-yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
+dnf -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
 
 echo -n "Getty fixes"
 # although we want console output going to the serial console, we don't
@@ -167,10 +167,10 @@ echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 echo "Removing random-seed so it's not the same in every image."
 rm -f /var/lib/systemd/random-seed
 
-echo "Cleaning old yum repodata."
-yum history new
-yum clean all
-truncate -c -s 0 /var/log/yum.log
+echo "Cleaning old dnf repodata."
+dnf history new
+dnf clean all
+truncate -c -s 0 /var/log/dnf.log
 
 echo "Import RPM GPG key"
 releasever=$(rpm -q --qf '%{version}\n' fedora-release)
@@ -196,7 +196,7 @@ dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
 echo "Fixing SELinux contexts."
 touch /var/log/cron
 touch /var/log/boot.log
-mkdir -p /var/cache/yum
+mkdir -p /var/cache/dnf
 chattr -i /boot/extlinux/ldlinux.sys
 /usr/sbin/fixfiles -R -a restore
 chattr +i /boot/extlinux/ldlinux.sys

fedora-container-base.ks

@@ -12,7 +12,9 @@ vim-minimal
 dnf
 dnf-yum  # https://fedorahosted.org/fesco/ticket/1312#comment:29
 sssd-client
-
+sudo
+-glibc-langpack-en
+-cracklib-dicts
 %end
 
 %post --erroronfail --log=/root/anaconda-post.log
@@ -45,3 +47,15 @@ systemd-tmpfiles --prefix=/run/ --prefix=/var/run/ --create --boot || true
 rm /run/nologin # https://pagure.io/atomic-wg/issue/316
 
 %end
+
+%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
+set -eux
+
+# See: https://bugzilla.redhat.com/show_bug.cgi?id=1051816
+# NOTE: run this in nochroot because "find" does not exist in chroot
+KEEPLANG=en_US
+for dir in locale i18n; do
+    find /mnt/sysimage/usr/share/${dir} -mindepth  1 -maxdepth 1 -type d -not \( -name "${KEEPLANG}" -o -name POSIX \) -exec rm -rfv {} +
+done
+
+%end

fedora-container-common.ks

@@ -61,6 +61,9 @@ set -eux
 LANG="en_US"
 echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
 
+# https://bugzilla.redhat.com/show_bug.cgi?id=1727489
+echo 'LANG="C.UTF-8"' >  /etc/locale.conf
+
 # https://bugzilla.redhat.com/show_bug.cgi?id=1400682
 echo "Import RPM GPG key"
 releasever=$(rpm -q --qf '%{version}\n' fedora-release-container)

fedora-disk-server.ks

@@ -8,12 +8,15 @@ autopart --noswap
 # install the default groups for the server environment since installing the environment is not working
 @server-product
 @standard
+@core
 @headless-management
 @hardware-support
 @networkmanager-submodules
 
 @container-management
 @domain-client
+@guest-agents
+@server-hardware-support
 -initial-setup-gui
 -generic-release*
 %end

fedora-iot.ks

@@ -24,7 +24,7 @@ autopart --nohome --noswap --type=plain
 
 # Equivalent of %include fedora-repo.ks
 # Pull from the ostree repo that was created during the compose
-ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/devel/${basearch}/iot
+ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/stable/${basearch}/iot
 
 reboot
 
@@ -44,19 +44,19 @@ fi
 
 # Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
 # We want consumers of this image to track the two week releases.
-ostree admin set-origin --index 0 fedora-iot https://dl.fedoraproject.org/iot/repo/ "fedora/devel/${arch}/iot"
+ostree admin set-origin --index 0 fedora-iot https://dl.fedoraproject.org/iot/repo/ "fedora/stable/${arch}/iot"
 
 # Make sure the ref we're supposedly sitting on (according
 # to the updated origin) exists.
-ostree refs "fedora-iot:fedora/devel/${arch}/iot" --create "fedora-iot:fedora/devel/${arch}/iot"
+ostree refs "fedora-iot:fedora/stable/${arch}/iot" --create "fedora-iot:fedora/stable/${arch}/iot"
 
 # Remove the old ref so that the commit eventually gets cleaned up.
-ostree refs "fedora-iot:fedora/devel/${arch}/iot" --delete
+ostree refs "fedora-iot:fedora/stable/${arch}/iot" --delete
 
 # delete/add the remote with new options to enable gpg verification
 # and to point them at the cdn url
 ostree remote delete fedora-iot
-ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-iot-2019 --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/iot/mirrorlist  fedora-iot 'https://ostree.fedoraproject.org/iot'
+ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/ --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/iot/mirrorlist  fedora-iot 'https://ostree.fedoraproject.org/iot'
 
 # We're gettin a stray console= from somewhere, work around it
 rpm-ostree kargs --delete=console=tty0

fedora-live-base.ks

@@ -65,6 +65,7 @@ glibc-all-langpacks
 
 # no longer in @core since 2018-10, but needed for livesys script
 initscripts
+chkconfig
 %end
 
 %post

fedora-live-design_suite.ks

@@ -6,7 +6,6 @@
 # Maintainer:
 # - Luya Tshimbalanga <luya AT fedoraproject DOT org>
 # - Credit to Sebastian Dziallas for initiating the project
-
 %include fedora-live-workstation.ks
 
 # Size partition
@@ -17,11 +16,10 @@ part / --size 14336
 @design-suite
 
 # Provides backup application
-deja-dup
-deja-dup-nautilus
+#deja-dup
+#deja-dup-nautilus
 
 # Add extra gnome applications
-gnome-books
 gnome-calendar
 gnome-photos
 gnome-shell-extension-pomodoro
@@ -32,8 +30,7 @@ powerline
 powerline-fonts
 
 # Extra wallpapers
-f28-backgrounds-extras-base
-f28-backgrounds-extras-gnome
+f30-backgrounds-extras-gnome
 
 # removal of unneeded applications
 -gnome-boxes
@@ -41,7 +38,7 @@ f28-backgrounds-extras-gnome
 -rdesktop
 
 # temporarily removing conflicting application
--LuxRender-blender
+-synfigstudio
 -mypaint
 
 %end

fedora-live-python-classroom.ks

@@ -6,3 +6,6 @@
 
 %include fedora-live-workstation.ks
 %include fedora-python-classroom-gnome-common.ks
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1695796
+part / --size 7168

fedora-python-classroom-common.ks

@@ -17,6 +17,8 @@ wget
 -python33
 -python34
 -python35
+-python36
+-python38
 -pypy
 
 %end

fedora-repo.ks

@@ -3,7 +3,7 @@
 # Exactly one of the following should be uncommented
 
 # For the master branch the following should be uncommented
-%include fedora-repo-rawhide.ks
+# %include fedora-repo-rawhide.ks
 
 # For non-master branches the following should be uncommented
-# %include fedora-repo-not-rawhide.ks
+%include fedora-repo-not-rawhide.ks

fedora-scientific-common.ks

@@ -28,14 +28,6 @@ armadillo-devel
 ddd
 valgrind
 
-#python 2 tools/libraries not included from the groups
-python2-tools
-python-ipython
-python-ipython-console
-python-ipython-notebook
-sympy
-python-networkx
-python-pandas
 
 #python 3 and tools/libraries not included from the groups
 python3
@@ -51,8 +43,6 @@ python3-networkx
 python3-pandas
 
 # matplotlib backends
-python-matplotlib-qt4
-python-matplotlib-tk
 python3-matplotlib-qt4
 python3-matplotlib-tk
 
@@ -67,7 +57,7 @@ gcc-gfortran
 rkward
 
 # GUI for Octave
-qtoctave
+#qtoctave
 
 # julia
 # Comment out till build failure is sorted
@@ -80,7 +70,7 @@ qtoctave
 # Workaround for https://pagure.io/releng/issue/7814
 -eclipse-linuxtools-vagrant
 
-spyder
+#spyder
 
 #writing & publishing
 emacs
@@ -101,7 +91,6 @@ openmpi
 openmpi-devel
 valgrind-openmpi
 libgomp
-python-pp
 mpi4py-openmpi
 python3-mpi4py-openmpi
 

l10n/fedora-livecd-xfce-de_CH.ks

@@ -3,7 +3,7 @@
 # Maintainer(s):
 # - Fabian Affolter <fab at fedoraproject.org>
 
-%include ../fedora-livecd-xfce.ks
+%include ../fedora-live-xfce.ks
 
 lang de_DE
 keyboard sg-latin1-nodeadkeys

l10n/fedora-livecd-xfce-de_DE.ks

@@ -3,7 +3,7 @@
 # Maintainer(s):
 # - Fabian Affolter <fab at fedoraproject.org>
 
-%include ../fedora-livecd-xfce.ks
+%include ../fedora-live-xfce.ks
 
 lang de_DE.UTF-8
 keyboard de-latin1-nodeadkeys

l10n/fedora-livecd-xfce-fr_FR.ks

@@ -6,7 +6,7 @@
 # Maintainer(s):
 # - Matthieu Saulnier <fantom@fedoraproject.org>
 
-%include ../fedora-livecd-xfce.ks
+%include ../fedora-live-xfce.ks
 
 lang fr_FR.UTF-8
 keyboard fr-latin9

l10n/fedora-livecd-xfce-nl_NL.ks

@@ -3,7 +3,7 @@
 # Maintainer(s):
 # - Jeroen van Meeuwen <kanarip a fedoraunity.org>
 
-%include ../fedora-livecd-xfce.ks
+%include ../fedora-live-xfce.ks
 
 lang nl_NL
 keyboard us

l10n/fedora-livecd-xfce-pt_PT.ks

@@ -3,7 +3,7 @@
 # Maintainer(s):
 # - Pedro Silva <pedrofsilva a netcabo.pt>
 
-%include ../fedora-livecd-xfce.ks
+%include ../fedora-live-xfce.ks
 
 lang pt_PT.UTF-8
 keyboard pt-latin1

l10n/fedora-livecd-xfce-ru_RU.ks

@@ -3,7 +3,7 @@
 # Maintainer(s):
 # - Sergey Mihailov <sergey.mihailov at gmail.com>
 
-%include ../fedora-livecd-xfce.ks
+%include ../fedora-live-xfce.ks
 
 lang ru_RU.UTF-8
 keyboard ru