davidlt/fedora-kickstarts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

clean up some armhfp remnants

Browse Source 
There's a few bits of armhfp dregs hanging around so lets
clean them up as they're no longer used.

Signed-off-by: Peter Robinson <pbrobinson@fedoraproject.org>
This commit is contained in:
Peter Robinson 2023-02-28 10:32:45 +00:00 committed by ngompa
parent 101c5ac63a
commit fae2f44160
2 changed files with 1 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
fedora-disk-base.ks
View File

@ -34,8 +34,6 @@ firstboot --reconfig
@hardware-support
kernel
# on 32bit arm make sure we only install one kernel
-kernel-lpae
# remove this in %post
dracut-config-generic
-dracut-config-rescue
@ -57,20 +55,11 @@ glibc-all-langpacks
%post
# Find the architecture we are on
arch=$(uname -m)
# Setup Raspberry Pi firmware
if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
if [[ $arch == "aarch64" ]]; then
cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
else
cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
fi
fi
releasever=$(rpm --eval '%{fedora}')
@ -97,7 +86,7 @@ rm -f /var/lib/rpm/__db*
# when you are using fedora via serial console as you do not get any output post grub
# linux does a good job of knowing what consoles need to be enabled.
# https://bugzilla.redhat.com/show_bug.cgi?id=2022757
if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
if [[ $arch == "aarch64" ]]; then
sed -i -e 's|console=tty0||g' /boot/loader/entries/*conf
fi

12
fedora-iot.ks
View File

@ -24,23 +24,11 @@ ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipk
reboot
%post --erroronfail
# Find the architecture we are on
arch=$(uname -m)
if [[ $arch == "armv7l" ]]; then
arch="armhfp"
fi
# Setup Raspberry Pi firmware
if [[ $arch == "aarch64" ]] || [[ $arch == "armhfp" ]]; then
if [[ $arch == "aarch64" ]]; then
cp -P /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
cp -P /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
else
cp -P /usr/share/uboot/rpi_2/u-boot.bin /boot/efi/rpi2-u-boot.bin
cp -P /usr/share/uboot/rpi_3_32b/u-boot.bin /boot/efi/rpi3-u-boot.bin
cp -P /usr/share/uboot/rpi_4_32b/u-boot.bin /boot/efi/rpi4-u-boot.bin
fi
fi
# Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.