Operator Algebra for Geometry Objects

Instances of classes Point, IRect, Rect and Matrix are collectively also called “geometry” objects.

They all are special cases of Python sequences, see Using Python Sequences as Arguments in PyMuPDF for more background.

We have defined operators for these classes that allow dealing with them (almost) like ordinary numbers in terms of addition, subtraction, multiplication, division, and some others.

This chapter is a synopsis of what is possible.

General Remarks

  1. Operators can be either binary (i.e. involving two objects) or unary.

  2. The resulting type of binary operations is either a new object of the left operand’s class or a bool.

  3. The result of unary operations is either a new object of the same class, a bool or a float.

  4. The binary operators +, -, *, / are defined for all classes. They roughly do what you would expect – except, that the second operand …

    • may always be a number which then performs the operation on every component of the first one,

    • may always be a numeric sequence of the same length (2, 4 or 6) – we call such sequences point_like, rect_like or matrix_like, respectively.

  5. Rectangles support additional binary operations: intersection (operator “&”), union (operator “|”) and containment checking.

  6. Binary operators fully support in-place operations, so expressions like “a /= b” are valid if b is numeric or “a_like”.

Unary Operations

Oper.

Result

bool(OBJ)

is false exactly if all components of OBJ are zero

abs(OBJ)

the rectangle area – equal to norm(OBJ) for the other tyes

norm(OBJ)

square root of the component squares (Euclidean norm)

+OBJ

new copy of OBJ

-OBJ

new copy of OBJ with negated components

~m

inverse of matrix “m”, or the null matrix if not invertible

Binary Operations

For every geometry object “a” and every number “b”, the operations “a ° b” and “a °= b” are always defined for the operators +, -, *, /. The respective operation is simply executed for each component of “a”. If the second operand is not a number, then the following is defined:

Oper.

Result

a+b, a-b

component-wise execution, “b” must be “a-like”.

a*m, a/m

“a” can be a point, rectangle or matrix, but “m” must be matrix_like. “a/m” is treated as “a*~m” (see note below for non-invertible matrices). If “a” is a point or a rectangle, then “a.transform(m)” is executed. If “a” is a matrix, then matrix concatenation takes place.

a&b

intersection rectangle: “a” must be a rectangle and “b” rect_like. Delivers the largest rectangle contained in both operands.

a|b

union rectangle: “a” must be a rectangle, and “b” may be point_like or rect_like. Delivers the smallest rectangle containing both operands.

b in a

if “b” is a number, then “b in tuple(a)” is returned. If “b” is point_like or rect_like, then “a” must be a rectangle, and “a.contains(b)” is returned.

a == b

True if bool(a-b) is False (“b” may be “a-like”).

Note

Please note an important difference to usual arithmetics:

Matrix multiplication is not commutative, i.e. in general we have m*n != n*m for two matrices. Also, there are non-zero matrices which have no inverse, for example m = Matrix(1, 0, 1, 0, 1, 0). If you try to divide by any of these you will receive a ZeroDivisionError exception using operator “/”, e.g. for fitz.Identity / m. But if you formulate fitz.Identity * ~m, the result will be fitz.Matrix() (the null matrix).

Admittedly, this represents an inconsistency, and we are considering to remove it. For the time being, you can choose to avoid an exception and check whether ~m is the null matrix, or accept a potential ZeroDivisionError by using fitz.Identity / m.

Some Examples

Manipulation with numbers

For the usual arithmetic operations, numbers are always allowed as second operand. In addition, you can formulate “x in OBJ”, where x is a number. It is implemented as “x in tuple(OBJ)”:

>>> fitz.Rect(1, 2, 3, 4) + 5
fitz.Rect(6.0, 7.0, 8.0, 9.0)
>>> 3 in fitz.Rect(1, 2, 3, 4)
True
>>>

The following will create the upper left quarter of a document page rectangle:

>>> page.rect
Rect(0.0, 0.0, 595.0, 842.0)
>>> page.rect / 2
Rect(0.0, 0.0, 297.5, 421.0)
>>>

The following will deliver the middle point of a line connecting two points p1 and p2:

>>> p1 = fitz.Point(1, 2)
>>> p2 = fitz.Point(4711, 3141)
>>> mp = p1 + (p2 - p1) / 2
>>> mp
Point(2356.0, 1571.5)
>>>

Manipulation with “like” Objects

The second operand of a binary operation can always be “like” the left operand. “Like” in this context means “a sequence of numbers of the same length”. With the above examples:

>>> p1 + p2
Point(4712.0, 3143.0)
>>> p1 + (4711, 3141)
Point(4712.0, 3143.0)
>>> p1 += (4711, 3141)
>>> p1
Point(4712.0, 3143.0)
>>>

To shift a rectangle for 5 pixels to the right, do this:

>>> fitz.Rect(100, 100, 200, 200) + (5, 0, 5, 0)  # add 5 to the x coordinates
Rect(105.0, 100.0, 205.0, 200.0)
>>>

Points, rectangles and matrices can be transformed with matrices. In PyMuPDF, we treat this like a “multiplication” (or resp. “division”), where the second operand may be “like” a matrix. Division in this context means “multiplication with the inverted matrix”:

>>> m = fitz.Matrix(1, 2, 3, 4, 5, 6)
>>> n = fitz.Matrix(6, 5, 4, 3, 2, 1)
>>> p = fitz.Point(1, 2)
>>> p * m
Point(12.0, 16.0)
>>> p * (1, 2, 3, 4, 5, 6)
Point(12.0, 16.0)
>>> p / m
Point(2.0, -2.0)
>>> p / (1, 2, 3, 4, 5, 6)
Point(2.0, -2.0)
>>>
>>> m * n  # matrix multiplication
Matrix(14.0, 11.0, 34.0, 27.0, 56.0, 44.0)
>>> m / n  # matrix division
Matrix(2.5, -3.5, 3.5, -4.5, 5.5, -7.5)
>>>
>>> m / m  # result is equal to the Identity matrix
Matrix(1.0, 0.0, 0.0, 1.0, 0.0, 0.0)
>>>
>>> # look at this non-invertible matrix:
>>> m = fitz.Matrix(1, 0, 1, 0, 1, 0)
>>> ~m
Matrix(0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
>>> # we try dividing by it in two ways:
>>> p = fitz.Point(1, 2)
>>> p * ~m  # this delivers point (0, 0):
Point(0.0, 0.0)
>>> p / m  # but this is an exception:
Traceback (most recent call last):
  File "<pyshell#6>", line 1, in <module>
    p / m
  File "... /site-packages/fitz/fitz.py", line 869, in __truediv__
    raise ZeroDivisionError("matrix not invertible")
ZeroDivisionError: matrix not invertible
>>>

As a specialty, rectangles support additional binary operations:

  • intersection – the common area of rectangle-likes, operator “&”

  • inclusion – enlarge to include a point-like or rect-like, operator “|”

  • containment check – whether a point-like or rect-like is inside

Here is an example for creating the smallest rectangle enclosing given points:

>>> # first define some point-likes
>>> points = []
>>> for i in range(10):
        for j in range(10):
            points.append((i, j))
>>>
>>> # now create a rectangle containing all these 100 points
>>> # start with an empty rectangle
>>> r = fitz.Rect(points[0], points[0])
>>> for p in points[1:]:  # and include remaining points one by one
        r |= p
>>> r  # here is the to be expected result:
Rect(0.0, 0.0, 9.0, 9.0)
>>> (4, 5) in r  # this point-like lies inside the rectangle
True
>>> # and this rect-like is also inside
>>> (4, 4, 5, 5) in r
True
>>>